| /linux-3.4.99/Documentation/scsi/ ! |
| D | scsi-parameters.txt | 1 SCSI Kernel Parameters
15 advansys= [HW,SCSI]
18 aha152x= [HW,SCSI]
21 aha1542= [HW,SCSI]
24 aic7xxx= [HW,SCSI]
27 aic79xx= [HW,SCSI]
30 atascsi= [HW,SCSI] Atari SCSI
32 BusLogic= [HW,SCSI]
36 dtc3181e= [HW,SCSI]
38 eata= [HW,SCSI]
[all …]
|
| D | ibmmca.txt | 2 -=< The IBM Microchannel SCSI-Subsystem >=-
19 IBM MCA SCSI driver for Linux. Please note, that driver releases 4.0
29 - Chris Beauregard (improvement of the SCSI-device mapping by the driver)
31 - Klaus Kudielka (multiple SCSI-host management/detection, adaption to
42 2.1 IBM SCSI-Subsystem Detection
44 2.3 SCSI-Device Recognition and dynamical ldn Assignment
45 2.4 SCSI-Device Order
46 2.5 Regular SCSI-Command-Processing
54 2.13 Supported IBM SCSI-Subsystems
74 This README-file describes the IBM SCSI-subsystem low level driver for
[all …]
|
| D | ufs.txt | 17 3.4 SCSI Error handling
45 UFS has a layered communication architecture which is based on SCSI
54 protocol agnostic, however SCSI has been selected as a baseline
56 UFS supports subset of SCSI commands defined by SPC-4 and SBC-3.
57 * UCS: It handles SCSI commands supported by UFS specification.
94 The UFS host controller driver is based on Linux SCSI Framework.
96 SCSI Midlayer and PCIe based UFS host controllers.
108 Transfer request handling module of UFSHCD receives SCSI commands
109 from SCSI Midlayer, forms UPIUs and issues the UPIUs to UFS Host
111 host controller in the form of UPIUs and intimates the SCSI Midlayer
[all …]
|
| D | BusLogic.txt | 1 BusLogic MultiMaster and FlashPoint SCSI Driver for Linux
19 BusLogic, Inc. designed and manufactured a variety of high performance SCSI
40 to achieve the full performance that BusLogic SCSI Host Adapters and modern
41 SCSI peripherals are capable of, and to provide a highly robust driver that can
47 The latest information on Linux support for BusLogic SCSI Host Adapters, as
54 driver and SCSI subsystem at startup, along with any subsequent system messages
55 relevant to SCSI operations, and a detailed description of your system's
61 the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
62 Ultra SCSI Host Adapter in January 1996. This was mutually beneficial since
78 "Mylex SCSI host adapters are compatible with all major operating systems
[all …]
|
| D | sym53c8xx_2.txt | 13 2. Supported chips and SCSI features
15 3.1 Optimized SCSI SCRIPTS
39 10.2.6 Check SCSI BUS
40 10.2.7 Suggest a default SCSI id for hosts
47 10.4 SCSI BUS checking boot option
48 11. SCSI problem troubleshooting
60 This driver supports the whole SYM53C8XX family of PCI-SCSI controllers.
61 It also support the subset of LSI53C10XX PCI-SCSI controllers that are based
103 SCSI standard documentations are available at T10 site:
107 Useful SCSI tools written by Eric Youngdale are part of most Linux
[all …]
|
| D | 00-INDEX | 42 - Adaptec Ultra320 SCSI host adapters
50 - README file for the dc395x SCSI driver
64 - Serial Attached SCSI management layer.
72 - info on driver for OnStream SC-x0 SCSI tape
78 - README for the SCSI media changer driver
80 - info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
82 - short blurb on using SCSI support as a module.
84 - info on API between SCSI layer and low level drivers
86 - info on SCSI midlayer error handling infrastructure
88 - SCSI Fiber Channel Tansport
|
| D | ncr53c8xx.txt | 11 2. Supported chips and SCSI features
13 3.1 Optimized SCSI SCRIPTS
14 3.2 New features of the SYM53C896 (64 bit PCI dual LVD SCSI controller)
38 10.2.5 Ultra SCSI support
52 10.2.19 Check SCSI BUS
54 10.2.21 Suggest a default SCSI id for hosts
59 10.6 SCSI BUS checking boot option
67 14.3 Using only 8 bit devices with a WIDE SCSI controller.
70 15. SCSI problem troubleshooting
74 16.1 Synchronous timings for 53C875 and 53C860 Ultra-SCSI controllers
[all …]
|
| D | scsi_mid_low_api.txt | 2 SCSI mid_level - lower_level driver interface
7 This document outlines the interface between the Linux SCSI mid level and
8 SCSI lower level drivers. Lower level drivers (LLDs) are variously called
11 single SCSI initiator port on a SCSI transport. An "initiator" port
12 (SCSI terminology, see SAM-3 at http://www.t10.org) sends SCSI commands
13 to "target" SCSI ports (e.g. disks). There can be many LLDs in a running
15 SCSI HBAs. Some HBAs contain multiple hosts.
17 In some cases the SCSI transport is an external bus that already has
19 SCSI subsystem LLD is a software bridge to the other driver subsystem.
24 For example, the aic7xxx LLD controls Adaptec SCSI parallel interface
[all …]
|
| D | scsi_eh.txt | 2 SCSI EH
5 This document describes SCSI midlayer error handling infrastructure.
7 information regarding SCSI midlayer.
11 [1] How SCSI commands travel through the midlayer and to EH
17 [2] How SCSI EH works
23 [2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions
24 [2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions
28 [1] How SCSI commands travel through the midlayer and to EH
32 Each SCSI command is represented with struct scsi_cmnd (== scmd). A
45 invoking hostt->queuecommand() or SCSI midlayer will time it out.
[all …]
|
| D | NinjaSCSI.txt | 14 SCSI device: I-O data CDPS-PX24 (CD-ROM drive)
38 Because the NinjaSCSI driver requires some SCSI header files in Linux
85 version "KME ", "SCSI-CARD-001", "1"
88 version "KME ", "SCSI-CARD-002", "1"
91 version "KME ", "SCSI-CARD-003", "1"
94 version "KME ", "SCSI-CARD-004", "1"
108 If you eject card when doing some operation for your SCSI device or suspend
115 high level SCSI driver.
122 your SCSI device name(hard drive, CD-ROM, etc...)
|
| D | scsi.txt | 1 SCSI subsystem documentation
4 the SCSI subsystem in the Linux kernel (lk) 2.4 series. See:
5 http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single
8 http://web.archive.org/web/*/http://www.torque.net/scsi/SCSI-2.4-HOWTO
10 Notes on using modules in the SCSI subsystem
23 the SCSI subsystem.
37 aic7xxx.o driver is used to control all recent SCSI controller cards from
|
| D | tmscsim.txt | 17 The tmscsim driver supports PCI SCSI Host Adapters based on the AM53C974
18 chip. AM53C974 based SCSI adapters include:
27 scsi = SCSI driver, m = AMD (?) as opposed to w for the DC390W/U/F
57 driver. Of course you have to choose to compile SCSI support and DC390(T)
89 Upgrading a SCSI driver is always a delicate thing to do. The 2.0 driver has
96 * have copies of your SCSI disk's partition tables on some safe location:
101 if your SCSI disk gets corrupted. You can use
117 - SCSI
134 C = Controller, B = Bus, T = Target SCSI ID, U = Unit SCSI LUN.)
143 The "?" should be replaced by the SCSI host number. (The shell might do this
[all …]
|
| /linux-3.4.99/drivers/scsi/arm/ ! |
| D | Kconfig | 2 # SCSI driver configuration for Acorn
5 tristate "Acorn SCSI card (aka30) support"
6 depends on ARCH_ACORN && SCSI
9 This enables support for the Acorn SCSI card (aka30). If you have an
13 bool "Support SCSI 2 Tagged queueing"
16 Say Y here to enable tagged queuing support on the Acorn SCSI card.
18 This is a feature of SCSI-2 which improves performance: the host
19 adapter can send several SCSI commands to a device's queue even if
20 previous commands haven't finished yet. Some SCSI devices don't
24 bool "Support SCSI 2 Synchronous Transfers"
[all …]
|
| /linux-3.4.99/arch/mips/pci/ ! |
| D | fixup-sni.c | 22 #define SCSI PCIMT_IRQ_SCSI macro
46 { SCSI, SCSI, SCSI, SCSI, SCSI }, /* SCSI */
63 { SCSI, SCSI, SCSI, SCSI, SCSI }, /* SCSI */
75 { SCSI, SCSI, SCSI, SCSI, SCSI }, /* SCSI */
80 #undef SCSI
|
| /linux-3.4.99/drivers/zorro/ ! |
| D | zorro.ids | 16 0a00 [SCSI Host Adapter]
22 1300 Warp Engine [Accelerator, SCSI Host Adapter and RAM Expansion]
28 5400 A4091 [SCSI Host Adapter]
31 0100 A2090/A2090A [SCSI Host Adapter]
32 0200 A590/A2091 [SCSI Host Adapter]
33 0300 A590/A2091 [SCSI Host Adapter]
34 0400 A2090B 2090 Autoboot [SCSI Host Adapter]
42 5400 A4091 [SCSI Host Adapter]
49 0300 A2090/A2090A Combitec/MacroSystem [SCSI Host Adapter]
57 0400 Kronos 2000 [SCSI Host Adapter]
[all …]
|
| /linux-3.4.99/drivers/scsi/ ! |
| D | Kconfig | 1 menu "SCSI device support"
5 default y if SCSI=n || SCSI=y
6 default m if SCSI=m
16 config SCSI config
17 tristate "SCSI device support"
21 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
22 any other SCSI device under Linux, say Y and make sure that you know
23 the name of your SCSI host adapter (the card inside your computer
24 that "speaks" the SCSI protocol, also called SCSI controller),
28 the SCSI protocol. Examples of this include the parallel port
[all …]
|
| /linux-3.4.99/drivers/scsi/megaraid/ ! |
| D | Kconfig.megaraid | 3 depends on PCI && SCSI
9 depends on PCI && SCSI && MEGARAID_NEWGEN
19 depends on PCI && SCSI && MEGARAID_MM
40 LSI MegaRAID SCSI 320-0 1000:1960:1000:A520
41 LSI MegaRAID SCSI 320-1 1000:1960:1000:0520
42 LSI MegaRAID SCSI 320-2 1000:1960:1000:0518
43 LSI MegaRAID SCSI 320-0X 1000:0407:1000:0530
44 LSI MegaRAID SCSI 320-2X 1000:0407:1000:0532
45 LSI MegaRAID SCSI 320-4X 1000:0407:1000:0531
46 LSI MegaRAID SCSI 320-1E 1000:0408:1000:0001
[all …]
|
| /linux-3.4.99/Documentation/blockdev/ ! |
| D | cciss.txt | 91 SCSI tape drive and medium changer support
94 SCSI sequential access devices and medium changer devices are supported and
97 You must enable "SCSI tape drive support for Smart Array 5xxx" and
98 "SCSI support" in your kernel configuration to be able to use SCSI
101 Additionally, note that the driver will engage the SCSI core at init
103 also be directed to dynamically engage the SCSI core via the /proc filesystem
114 Once the SCSI core is engaged by the driver, it cannot be disengaged
118 detected, the SCSI core will not be engaged by the action of the above
121 Hot plug support for SCSI tape drives
124 Hot plugging of SCSI tape drives is supported, with some caveats.
[all …]
|
| /linux-3.4.99/drivers/scsi/pcmcia/ ! |
| D | Kconfig | 2 # PCMCIA SCSI adapter configuration
6 bool "PCMCIA SCSI adapter support"
7 depends on SCSI!=n && PCMCIA!=n
10 if SCSI_LOWLEVEL_PCMCIA && SCSI && PCMCIA && m
16 Say Y here if you intend to attach this type of PCMCIA SCSI host
25 Say Y here if you intend to attach this type of PCMCIA SCSI host
35 If you intend to attach this type of PCMCIA SCSI host adapter to
57 (version string: "KME ","SCSI-CARD-001","1")]
68 Say Y here if you intend to attach this type of PCMCIA SCSI host
78 SCSI adapter based on the Symbios 53c500 controller.
|
| /linux-3.4.99/drivers/scsi/device_handler/ ! |
| D | Kconfig | 2 # SCSI Device Handler configuration
6 tristate "SCSI Device Handlers"
7 depends on SCSI
10 SCSI Device Handlers provide device specific support for
38 SCSI Device handler for generic SPC-3 Asymmetric Logical Unit
|
| /linux-3.4.99/drivers/staging/keucr/ ! |
| D | Kconfig | 3 depends on USB && SCSI && m
8 This option depends on 'SCSI' support being enabled, but you
9 probably also need 'SCSI device support: SCSI disk support'
|
| /linux-3.4.99/drivers/message/i2o/ ! |
| D | Kconfig | 43 have to say Y to "I2O Configuration support", "I2O SCSI OSM" below
44 and to "SCSI generic support" under "SCSI device configuration".
94 by the SCSI OSM driver, for example to monitor the disks.
100 tristate "I2O SCSI OSM"
101 depends on SCSI
103 Allows direct SCSI access to SCSI devices on a SCSI or FibreChannel
104 I2O controller. You can use both the SCSI and Block OSM together if
106 But you could use the SCSI OSM driver to monitor the single disks.
|
| /linux-3.4.99/drivers/eisa/ ! |
| D | eisa.ids | 10 ABP0510 "Advansys ABP-510 ISA SCSI Host Adapter"
11 ABP0540 "Advansys ABP-540/542 ISA SCSI Host Adapter"
12 ABP7401 "AdvanSys ABP-740/742 EISA Single Channel SCSI Host Adapter"
13 ABP7501 "AdvanSys ABP-750/752 EISA Dual Channel SCSI Host Adapter"
51 ADP0000 "Adaptec AHA-1740 SCSI"
52 ADP0001 "Adaptec AHA-1740A SCSI"
53 ADP0002 "Adaptec AHA-1742A SCSI"
54 ADP0100 "Adaptec AHA-1540/1542 ISA SCSI Host Adapter"
56 ADP0200 "Adaptec AHA-1520/1522 ISA SCSI Host Adapter"
57 ADP0400 "Adaptec AHA-1744 SCSI"
[all …]
|
| /linux-3.4.99/drivers/infiniband/ulp/srp/ ! |
| D | Kconfig | 2 tristate "InfiniBand SCSI RDMA Protocol"
3 depends on SCSI
6 Support for the SCSI RDMA Protocol over InfiniBand. This
|
| /linux-3.4.99/drivers/message/fusion/ ! |
| D | Kconfig | 16 depends on PCI && SCSI
19 SCSI HOST support for a parallel SCSI host adapters.
31 depends on PCI && SCSI
34 SCSI HOST support for a Fiber Channel host adapters.
50 depends on PCI && SCSI
53 SCSI HOST support for a SAS host adapters.
|