1 /* 2 * Copyright(c) 2007 Atheros Corporation. All rights reserved. 3 * 4 * Derived from Intel e1000 driver 5 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the Free 9 * Software Foundation; either version 2 of the License, or (at your option) 10 * any later version. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 15 * more details. 16 * 17 * You should have received a copy of the GNU General Public License along with 18 * this program; if not, write to the Free Software Foundation, Inc., 59 19 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. 20 */ 21 22 #ifndef _ATHL1E_HW_H_ 23 #define _ATHL1E_HW_H_ 24 25 #include <linux/types.h> 26 #include <linux/mii.h> 27 28 struct atl1e_adapter; 29 struct atl1e_hw; 30 31 /* function prototype */ 32 s32 atl1e_reset_hw(struct atl1e_hw *hw); 33 s32 atl1e_read_mac_addr(struct atl1e_hw *hw); 34 s32 atl1e_init_hw(struct atl1e_hw *hw); 35 s32 atl1e_phy_commit(struct atl1e_hw *hw); 36 s32 atl1e_get_speed_and_duplex(struct atl1e_hw *hw, u16 *speed, u16 *duplex); 37 u32 atl1e_auto_get_fc(struct atl1e_adapter *adapter, u16 duplex); 38 u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr); 39 void atl1e_hash_set(struct atl1e_hw *hw, u32 hash_value); 40 s32 atl1e_read_phy_reg(struct atl1e_hw *hw, u16 reg_addr, u16 *phy_data); 41 s32 atl1e_write_phy_reg(struct atl1e_hw *hw, u32 reg_addr, u16 phy_data); 42 s32 atl1e_validate_mdi_setting(struct atl1e_hw *hw); 43 void atl1e_hw_set_mac_addr(struct atl1e_hw *hw); 44 bool atl1e_read_eeprom(struct atl1e_hw *hw, u32 offset, u32 *p_value); 45 bool atl1e_write_eeprom(struct atl1e_hw *hw, u32 offset, u32 value); 46 s32 atl1e_phy_enter_power_saving(struct atl1e_hw *hw); 47 s32 atl1e_phy_leave_power_saving(struct atl1e_hw *hw); 48 s32 atl1e_phy_init(struct atl1e_hw *hw); 49 int atl1e_check_eeprom_exist(struct atl1e_hw *hw); 50 void atl1e_force_ps(struct atl1e_hw *hw); 51 s32 atl1e_restart_autoneg(struct atl1e_hw *hw); 52 53 /* register definition */ 54 #define REG_PM_CTRLSTAT 0x44 55 56 #define REG_PCIE_CAP_LIST 0x58 57 58 #define REG_DEVICE_CAP 0x5C 59 #define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7 60 #define DEVICE_CAP_MAX_PAYLOAD_SHIFT 0 61 62 #define REG_DEVICE_CTRL 0x60 63 #define DEVICE_CTRL_MAX_PAYLOAD_MASK 0x7 64 #define DEVICE_CTRL_MAX_PAYLOAD_SHIFT 5 65 #define DEVICE_CTRL_MAX_RREQ_SZ_MASK 0x7 66 #define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT 12 67 68 #define REG_VPD_CAP 0x6C 69 #define VPD_CAP_ID_MASK 0xff 70 #define VPD_CAP_ID_SHIFT 0 71 #define VPD_CAP_NEXT_PTR_MASK 0xFF 72 #define VPD_CAP_NEXT_PTR_SHIFT 8 73 #define VPD_CAP_VPD_ADDR_MASK 0x7FFF 74 #define VPD_CAP_VPD_ADDR_SHIFT 16 75 #define VPD_CAP_VPD_FLAG 0x80000000 76 77 #define REG_VPD_DATA 0x70 78 79 #define REG_SPI_FLASH_CTRL 0x200 80 #define SPI_FLASH_CTRL_STS_NON_RDY 0x1 81 #define SPI_FLASH_CTRL_STS_WEN 0x2 82 #define SPI_FLASH_CTRL_STS_WPEN 0x80 83 #define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF 84 #define SPI_FLASH_CTRL_DEV_STS_SHIFT 0 85 #define SPI_FLASH_CTRL_INS_MASK 0x7 86 #define SPI_FLASH_CTRL_INS_SHIFT 8 87 #define SPI_FLASH_CTRL_START 0x800 88 #define SPI_FLASH_CTRL_EN_VPD 0x2000 89 #define SPI_FLASH_CTRL_LDSTART 0x8000 90 #define SPI_FLASH_CTRL_CS_HI_MASK 0x3 91 #define SPI_FLASH_CTRL_CS_HI_SHIFT 16 92 #define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3 93 #define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18 94 #define SPI_FLASH_CTRL_CLK_LO_MASK 0x3 95 #define SPI_FLASH_CTRL_CLK_LO_SHIFT 20 96 #define SPI_FLASH_CTRL_CLK_HI_MASK 0x3 97 #define SPI_FLASH_CTRL_CLK_HI_SHIFT 22 98 #define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3 99 #define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24 100 #define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3 101 #define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26 102 #define SPI_FLASH_CTRL_WAIT_READY 0x10000000 103 104 #define REG_SPI_ADDR 0x204 105 106 #define REG_SPI_DATA 0x208 107 108 #define REG_SPI_FLASH_CONFIG 0x20C 109 #define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF 110 #define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0 111 #define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3 112 #define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24 113 #define SPI_FLASH_CONFIG_LD_EXIST 0x4000000 114 115 116 #define REG_SPI_FLASH_OP_PROGRAM 0x210 117 #define REG_SPI_FLASH_OP_SC_ERASE 0x211 118 #define REG_SPI_FLASH_OP_CHIP_ERASE 0x212 119 #define REG_SPI_FLASH_OP_RDID 0x213 120 #define REG_SPI_FLASH_OP_WREN 0x214 121 #define REG_SPI_FLASH_OP_RDSR 0x215 122 #define REG_SPI_FLASH_OP_WRSR 0x216 123 #define REG_SPI_FLASH_OP_READ 0x217 124 125 #define REG_TWSI_CTRL 0x218 126 #define TWSI_CTRL_LD_OFFSET_MASK 0xFF 127 #define TWSI_CTRL_LD_OFFSET_SHIFT 0 128 #define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 129 #define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 130 #define TWSI_CTRL_SW_LDSTART 0x800 131 #define TWSI_CTRL_HW_LDSTART 0x1000 132 #define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x0x7F 133 #define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 134 #define TWSI_CTRL_LD_EXIST 0x400000 135 #define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 136 #define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 137 #define TWSI_CTRL_FREQ_SEL_100K 0 138 #define TWSI_CTRL_FREQ_SEL_200K 1 139 #define TWSI_CTRL_FREQ_SEL_300K 2 140 #define TWSI_CTRL_FREQ_SEL_400K 3 141 #define TWSI_CTRL_SMB_SLV_ADDR 142 #define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 143 #define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 144 145 146 #define REG_PCIE_DEV_MISC_CTRL 0x21C 147 #define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2 148 #define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1 149 #define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4 150 #define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8 151 #define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10 152 153 #define REG_PCIE_PHYMISC 0x1000 154 #define PCIE_PHYMISC_FORCE_RCV_DET 0x4 155 156 #define REG_LTSSM_TEST_MODE 0x12FC 157 #define LTSSM_TEST_MODE_DEF 0xE000 158 159 /* Selene Master Control Register */ 160 #define REG_MASTER_CTRL 0x1400 161 #define MASTER_CTRL_SOFT_RST 0x1 162 #define MASTER_CTRL_MTIMER_EN 0x2 163 #define MASTER_CTRL_ITIMER_EN 0x4 164 #define MASTER_CTRL_MANUAL_INT 0x8 165 #define MASTER_CTRL_ITIMER2_EN 0x20 166 #define MASTER_CTRL_INT_RDCLR 0x40 167 #define MASTER_CTRL_LED_MODE 0x200 168 #define MASTER_CTRL_REV_NUM_SHIFT 16 169 #define MASTER_CTRL_REV_NUM_MASK 0xff 170 #define MASTER_CTRL_DEV_ID_SHIFT 24 171 #define MASTER_CTRL_DEV_ID_MASK 0xff 172 173 /* Timer Initial Value Register */ 174 #define REG_MANUAL_TIMER_INIT 0x1404 175 176 177 /* IRQ ModeratorTimer Initial Value Register */ 178 #define REG_IRQ_MODU_TIMER_INIT 0x1408 /* w */ 179 #define REG_IRQ_MODU_TIMER2_INIT 0x140A /* w */ 180 181 182 #define REG_GPHY_CTRL 0x140C 183 #define GPHY_CTRL_EXT_RESET 1 184 #define GPHY_CTRL_PIPE_MOD 2 185 #define GPHY_CTRL_TEST_MODE_MASK 3 186 #define GPHY_CTRL_TEST_MODE_SHIFT 2 187 #define GPHY_CTRL_BERT_START 0x10 188 #define GPHY_CTRL_GATE_25M_EN 0x20 189 #define GPHY_CTRL_LPW_EXIT 0x40 190 #define GPHY_CTRL_PHY_IDDQ 0x80 191 #define GPHY_CTRL_PHY_IDDQ_DIS 0x100 192 #define GPHY_CTRL_PCLK_SEL_DIS 0x200 193 #define GPHY_CTRL_HIB_EN 0x400 194 #define GPHY_CTRL_HIB_PULSE 0x800 195 #define GPHY_CTRL_SEL_ANA_RST 0x1000 196 #define GPHY_CTRL_PHY_PLL_ON 0x2000 197 #define GPHY_CTRL_PWDOWN_HW 0x4000 198 #define GPHY_CTRL_DEFAULT (\ 199 GPHY_CTRL_PHY_PLL_ON |\ 200 GPHY_CTRL_SEL_ANA_RST |\ 201 GPHY_CTRL_HIB_PULSE |\ 202 GPHY_CTRL_HIB_EN) 203 204 #define GPHY_CTRL_PW_WOL_DIS (\ 205 GPHY_CTRL_PHY_PLL_ON |\ 206 GPHY_CTRL_SEL_ANA_RST |\ 207 GPHY_CTRL_HIB_PULSE |\ 208 GPHY_CTRL_HIB_EN |\ 209 GPHY_CTRL_PWDOWN_HW |\ 210 GPHY_CTRL_PCLK_SEL_DIS |\ 211 GPHY_CTRL_PHY_IDDQ) 212 213 /* IRQ Anti-Lost Timer Initial Value Register */ 214 #define REG_CMBDISDMA_TIMER 0x140E 215 216 217 /* Block IDLE Status Register */ 218 #define REG_IDLE_STATUS 0x1410 219 #define IDLE_STATUS_RXMAC 1 /* 1: RXMAC state machine is in non-IDLE state. 0: RXMAC is idling */ 220 #define IDLE_STATUS_TXMAC 2 /* 1: TXMAC state machine is in non-IDLE state. 0: TXMAC is idling */ 221 #define IDLE_STATUS_RXQ 4 /* 1: RXQ state machine is in non-IDLE state. 0: RXQ is idling */ 222 #define IDLE_STATUS_TXQ 8 /* 1: TXQ state machine is in non-IDLE state. 0: TXQ is idling */ 223 #define IDLE_STATUS_DMAR 0x10 /* 1: DMAR state machine is in non-IDLE state. 0: DMAR is idling */ 224 #define IDLE_STATUS_DMAW 0x20 /* 1: DMAW state machine is in non-IDLE state. 0: DMAW is idling */ 225 #define IDLE_STATUS_SMB 0x40 /* 1: SMB state machine is in non-IDLE state. 0: SMB is idling */ 226 #define IDLE_STATUS_CMB 0x80 /* 1: CMB state machine is in non-IDLE state. 0: CMB is idling */ 227 228 /* MDIO Control Register */ 229 #define REG_MDIO_CTRL 0x1414 230 #define MDIO_DATA_MASK 0xffff /* On MDIO write, the 16-bit control data to write to PHY MII management register */ 231 #define MDIO_DATA_SHIFT 0 /* On MDIO read, the 16-bit status data that was read from the PHY MII management register*/ 232 #define MDIO_REG_ADDR_MASK 0x1f /* MDIO register address */ 233 #define MDIO_REG_ADDR_SHIFT 16 234 #define MDIO_RW 0x200000 /* 1: read, 0: write */ 235 #define MDIO_SUP_PREAMBLE 0x400000 /* Suppress preamble */ 236 #define MDIO_START 0x800000 /* Write 1 to initiate the MDIO master. And this bit is self cleared after one cycle*/ 237 #define MDIO_CLK_SEL_SHIFT 24 238 #define MDIO_CLK_25_4 0 239 #define MDIO_CLK_25_6 2 240 #define MDIO_CLK_25_8 3 241 #define MDIO_CLK_25_10 4 242 #define MDIO_CLK_25_14 5 243 #define MDIO_CLK_25_20 6 244 #define MDIO_CLK_25_28 7 245 #define MDIO_BUSY 0x8000000 246 #define MDIO_AP_EN 0x10000000 247 #define MDIO_WAIT_TIMES 10 248 249 /* MII PHY Status Register */ 250 #define REG_PHY_STATUS 0x1418 251 #define PHY_STATUS_100M 0x20000 252 #define PHY_STATUS_EMI_CA 0x40000 253 254 /* BIST Control and Status Register0 (for the Packet Memory) */ 255 #define REG_BIST0_CTRL 0x141c 256 #define BIST0_NOW 0x1 /* 1: To trigger BIST0 logic. This bit stays high during the */ 257 /* BIST process and reset to zero when BIST is done */ 258 #define BIST0_SRAM_FAIL 0x2 /* 1: The SRAM failure is un-repairable because it has address */ 259 /* decoder failure or more than 1 cell stuck-to-x failure */ 260 #define BIST0_FUSE_FLAG 0x4 /* 1: Indicating one cell has been fixed */ 261 262 /* BIST Control and Status Register1(for the retry buffer of PCI Express) */ 263 #define REG_BIST1_CTRL 0x1420 264 #define BIST1_NOW 0x1 /* 1: To trigger BIST0 logic. This bit stays high during the */ 265 /* BIST process and reset to zero when BIST is done */ 266 #define BIST1_SRAM_FAIL 0x2 /* 1: The SRAM failure is un-repairable because it has address */ 267 /* decoder failure or more than 1 cell stuck-to-x failure.*/ 268 #define BIST1_FUSE_FLAG 0x4 269 270 /* SerDes Lock Detect Control and Status Register */ 271 #define REG_SERDES_LOCK 0x1424 272 #define SERDES_LOCK_DETECT 1 /* 1: SerDes lock detected . This signal comes from Analog SerDes */ 273 #define SERDES_LOCK_DETECT_EN 2 /* 1: Enable SerDes Lock detect function */ 274 275 /* MAC Control Register */ 276 #define REG_MAC_CTRL 0x1480 277 #define MAC_CTRL_TX_EN 1 /* 1: Transmit Enable */ 278 #define MAC_CTRL_RX_EN 2 /* 1: Receive Enable */ 279 #define MAC_CTRL_TX_FLOW 4 /* 1: Transmit Flow Control Enable */ 280 #define MAC_CTRL_RX_FLOW 8 /* 1: Receive Flow Control Enable */ 281 #define MAC_CTRL_LOOPBACK 0x10 /* 1: Loop back at G/MII Interface */ 282 #define MAC_CTRL_DUPLX 0x20 /* 1: Full-duplex mode 0: Half-duplex mode */ 283 #define MAC_CTRL_ADD_CRC 0x40 /* 1: Instruct MAC to attach CRC on all egress Ethernet frames */ 284 #define MAC_CTRL_PAD 0x80 /* 1: Instruct MAC to pad short frames to 60-bytes, and then attach CRC. This bit has higher priority over CRC_EN */ 285 #define MAC_CTRL_LENCHK 0x100 /* 1: Instruct MAC to check if length field matches the real packet length */ 286 #define MAC_CTRL_HUGE_EN 0x200 /* 1: receive Jumbo frame enable */ 287 #define MAC_CTRL_PRMLEN_SHIFT 10 /* Preamble length */ 288 #define MAC_CTRL_PRMLEN_MASK 0xf 289 #define MAC_CTRL_RMV_VLAN 0x4000 /* 1: to remove VLAN Tag automatically from all receive packets */ 290 #define MAC_CTRL_PROMIS_EN 0x8000 /* 1: Promiscuous Mode Enable */ 291 #define MAC_CTRL_TX_PAUSE 0x10000 /* 1: transmit test pause */ 292 #define MAC_CTRL_SCNT 0x20000 /* 1: shortcut slot time counter */ 293 #define MAC_CTRL_SRST_TX 0x40000 /* 1: synchronized reset Transmit MAC module */ 294 #define MAC_CTRL_TX_SIMURST 0x80000 /* 1: transmit simulation reset */ 295 #define MAC_CTRL_SPEED_SHIFT 20 /* 10: gigabit 01:10M/100M */ 296 #define MAC_CTRL_SPEED_MASK 0x300000 297 #define MAC_CTRL_SPEED_1000 2 298 #define MAC_CTRL_SPEED_10_100 1 299 #define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 /* 1: transmit maximum backoff (half-duplex test bit) */ 300 #define MAC_CTRL_TX_HUGE 0x800000 /* 1: transmit huge enable */ 301 #define MAC_CTRL_RX_CHKSUM_EN 0x1000000 /* 1: RX checksum enable */ 302 #define MAC_CTRL_MC_ALL_EN 0x2000000 /* 1: upload all multicast frame without error to system */ 303 #define MAC_CTRL_BC_EN 0x4000000 /* 1: upload all broadcast frame without error to system */ 304 #define MAC_CTRL_DBG 0x8000000 /* 1: upload all received frame to system (Debug Mode) */ 305 306 /* MAC IPG/IFG Control Register */ 307 #define REG_MAC_IPG_IFG 0x1484 308 #define MAC_IPG_IFG_IPGT_SHIFT 0 /* Desired back to back inter-packet gap. The default is 96-bit time */ 309 #define MAC_IPG_IFG_IPGT_MASK 0x7f 310 #define MAC_IPG_IFG_MIFG_SHIFT 8 /* Minimum number of IFG to enforce in between RX frames */ 311 #define MAC_IPG_IFG_MIFG_MASK 0xff /* Frame gap below such IFP is dropped */ 312 #define MAC_IPG_IFG_IPGR1_SHIFT 16 /* 64bit Carrier-Sense window */ 313 #define MAC_IPG_IFG_IPGR1_MASK 0x7f 314 #define MAC_IPG_IFG_IPGR2_SHIFT 24 /* 96-bit IPG window */ 315 #define MAC_IPG_IFG_IPGR2_MASK 0x7f 316 317 /* MAC STATION ADDRESS */ 318 #define REG_MAC_STA_ADDR 0x1488 319 320 /* Hash table for multicast address */ 321 #define REG_RX_HASH_TABLE 0x1490 322 323 324 /* MAC Half-Duplex Control Register */ 325 #define REG_MAC_HALF_DUPLX_CTRL 0x1498 326 #define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 /* Collision Window */ 327 #define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff 328 #define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 /* Retransmission maximum, afterwards the packet will be discarded */ 329 #define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf 330 #define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 /* 1: Allow the transmission of a packet which has been excessively deferred */ 331 #define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 /* 1: No back-off on collision, immediately start the retransmission */ 332 #define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 /* 1: No back-off on backpressure, immediately start the transmission after back pressure */ 333 #define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */ 334 #define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 /* Maximum binary exponential number */ 335 #define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf 336 #define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 /* IPG to start JAM for collision based flow control in half-duplex */ 337 #define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf /* mode. In unit of 8-bit time */ 338 339 /* Maximum Frame Length Control Register */ 340 #define REG_MTU 0x149c 341 342 /* Wake-On-Lan control register */ 343 #define REG_WOL_CTRL 0x14a0 344 #define WOL_PATTERN_EN 0x00000001 345 #define WOL_PATTERN_PME_EN 0x00000002 346 #define WOL_MAGIC_EN 0x00000004 347 #define WOL_MAGIC_PME_EN 0x00000008 348 #define WOL_LINK_CHG_EN 0x00000010 349 #define WOL_LINK_CHG_PME_EN 0x00000020 350 #define WOL_PATTERN_ST 0x00000100 351 #define WOL_MAGIC_ST 0x00000200 352 #define WOL_LINKCHG_ST 0x00000400 353 #define WOL_CLK_SWITCH_EN 0x00008000 354 #define WOL_PT0_EN 0x00010000 355 #define WOL_PT1_EN 0x00020000 356 #define WOL_PT2_EN 0x00040000 357 #define WOL_PT3_EN 0x00080000 358 #define WOL_PT4_EN 0x00100000 359 #define WOL_PT5_EN 0x00200000 360 #define WOL_PT6_EN 0x00400000 361 /* WOL Length ( 2 DWORD ) */ 362 #define REG_WOL_PATTERN_LEN 0x14a4 363 #define WOL_PT_LEN_MASK 0x7f 364 #define WOL_PT0_LEN_SHIFT 0 365 #define WOL_PT1_LEN_SHIFT 8 366 #define WOL_PT2_LEN_SHIFT 16 367 #define WOL_PT3_LEN_SHIFT 24 368 #define WOL_PT4_LEN_SHIFT 0 369 #define WOL_PT5_LEN_SHIFT 8 370 #define WOL_PT6_LEN_SHIFT 16 371 372 /* Internal SRAM Partition Register */ 373 #define REG_SRAM_TRD_ADDR 0x1518 374 #define REG_SRAM_TRD_LEN 0x151C 375 #define REG_SRAM_RXF_ADDR 0x1520 376 #define REG_SRAM_RXF_LEN 0x1524 377 #define REG_SRAM_TXF_ADDR 0x1528 378 #define REG_SRAM_TXF_LEN 0x152C 379 #define REG_SRAM_TCPH_ADDR 0x1530 380 #define REG_SRAM_PKTH_ADDR 0x1532 381 382 /* Load Ptr Register */ 383 #define REG_LOAD_PTR 0x1534 /* Software sets this bit after the initialization of the head and tail */ 384 385 /* 386 * addresses of all descriptors, as well as the following descriptor 387 * control register, which triggers each function block to load the head 388 * pointer to prepare for the operation. This bit is then self-cleared 389 * after one cycle. 390 */ 391 392 /* Descriptor Control register */ 393 #define REG_RXF3_BASE_ADDR_HI 0x153C 394 #define REG_DESC_BASE_ADDR_HI 0x1540 395 #define REG_RXF0_BASE_ADDR_HI 0x1540 /* share with DESC BASE ADDR HI */ 396 #define REG_HOST_RXF0_PAGE0_LO 0x1544 397 #define REG_HOST_RXF0_PAGE1_LO 0x1548 398 #define REG_TPD_BASE_ADDR_LO 0x154C 399 #define REG_RXF1_BASE_ADDR_HI 0x1550 400 #define REG_RXF2_BASE_ADDR_HI 0x1554 401 #define REG_HOST_RXFPAGE_SIZE 0x1558 402 #define REG_TPD_RING_SIZE 0x155C 403 /* RSS about */ 404 #define REG_RSS_KEY0 0x14B0 405 #define REG_RSS_KEY1 0x14B4 406 #define REG_RSS_KEY2 0x14B8 407 #define REG_RSS_KEY3 0x14BC 408 #define REG_RSS_KEY4 0x14C0 409 #define REG_RSS_KEY5 0x14C4 410 #define REG_RSS_KEY6 0x14C8 411 #define REG_RSS_KEY7 0x14CC 412 #define REG_RSS_KEY8 0x14D0 413 #define REG_RSS_KEY9 0x14D4 414 #define REG_IDT_TABLE4 0x14E0 415 #define REG_IDT_TABLE5 0x14E4 416 #define REG_IDT_TABLE6 0x14E8 417 #define REG_IDT_TABLE7 0x14EC 418 #define REG_IDT_TABLE0 0x1560 419 #define REG_IDT_TABLE1 0x1564 420 #define REG_IDT_TABLE2 0x1568 421 #define REG_IDT_TABLE3 0x156C 422 #define REG_IDT_TABLE REG_IDT_TABLE0 423 #define REG_RSS_HASH_VALUE 0x1570 424 #define REG_RSS_HASH_FLAG 0x1574 425 #define REG_BASE_CPU_NUMBER 0x157C 426 427 428 /* TXQ Control Register */ 429 #define REG_TXQ_CTRL 0x1580 430 #define TXQ_CTRL_NUM_TPD_BURST_MASK 0xF 431 #define TXQ_CTRL_NUM_TPD_BURST_SHIFT 0 432 #define TXQ_CTRL_EN 0x20 /* 1: Enable TXQ */ 433 #define TXQ_CTRL_ENH_MODE 0x40 /* Performance enhancement mode, in which up to two back-to-back DMA read commands might be dispatched. */ 434 #define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16 /* Number of data byte to read in a cache-aligned burst. Each SRAM entry is 8-byte in length. */ 435 #define TXQ_CTRL_TXF_BURST_NUM_MASK 0xffff 436 437 /* Jumbo packet Threshold for task offload */ 438 #define REG_TX_EARLY_TH 0x1584 /* Jumbo frame threshold in QWORD unit. Packet greater than */ 439 /* JUMBO_TASK_OFFLOAD_THRESHOLD will not be task offloaded. */ 440 #define TX_TX_EARLY_TH_MASK 0x7ff 441 #define TX_TX_EARLY_TH_SHIFT 0 442 443 444 /* RXQ Control Register */ 445 #define REG_RXQ_CTRL 0x15A0 446 #define RXQ_CTRL_PBA_ALIGN_32 0 /* rx-packet alignment */ 447 #define RXQ_CTRL_PBA_ALIGN_64 1 448 #define RXQ_CTRL_PBA_ALIGN_128 2 449 #define RXQ_CTRL_PBA_ALIGN_256 3 450 #define RXQ_CTRL_Q1_EN 0x10 451 #define RXQ_CTRL_Q2_EN 0x20 452 #define RXQ_CTRL_Q3_EN 0x40 453 #define RXQ_CTRL_IPV6_XSUM_VERIFY_EN 0x80 454 #define RXQ_CTRL_HASH_TLEN_SHIFT 8 455 #define RXQ_CTRL_HASH_TLEN_MASK 0xFF 456 #define RXQ_CTRL_HASH_TYPE_IPV4 0x10000 457 #define RXQ_CTRL_HASH_TYPE_IPV4_TCP 0x20000 458 #define RXQ_CTRL_HASH_TYPE_IPV6 0x40000 459 #define RXQ_CTRL_HASH_TYPE_IPV6_TCP 0x80000 460 #define RXQ_CTRL_RSS_MODE_DISABLE 0 461 #define RXQ_CTRL_RSS_MODE_SQSINT 0x4000000 462 #define RXQ_CTRL_RSS_MODE_MQUESINT 0x8000000 463 #define RXQ_CTRL_RSS_MODE_MQUEMINT 0xC000000 464 #define RXQ_CTRL_NIP_QUEUE_SEL_TBL 0x10000000 465 #define RXQ_CTRL_HASH_ENABLE 0x20000000 466 #define RXQ_CTRL_CUT_THRU_EN 0x40000000 467 #define RXQ_CTRL_EN 0x80000000 468 469 /* Rx jumbo packet threshold and rrd retirement timer */ 470 #define REG_RXQ_JMBOSZ_RRDTIM 0x15A4 471 /* 472 * Jumbo packet threshold for non-VLAN packet, in QWORD (64-bit) unit. 473 * When the packet length greater than or equal to this value, RXQ 474 * shall start cut-through forwarding of the received packet. 475 */ 476 #define RXQ_JMBOSZ_TH_MASK 0x7ff 477 #define RXQ_JMBOSZ_TH_SHIFT 0 /* RRD retirement timer. Decrement by 1 after every 512ns passes*/ 478 #define RXQ_JMBO_LKAH_MASK 0xf 479 #define RXQ_JMBO_LKAH_SHIFT 11 480 481 /* RXF flow control register */ 482 #define REG_RXQ_RXF_PAUSE_THRESH 0x15A8 483 #define RXQ_RXF_PAUSE_TH_HI_SHIFT 0 484 #define RXQ_RXF_PAUSE_TH_HI_MASK 0xfff 485 #define RXQ_RXF_PAUSE_TH_LO_SHIFT 16 486 #define RXQ_RXF_PAUSE_TH_LO_MASK 0xfff 487 488 489 /* DMA Engine Control Register */ 490 #define REG_DMA_CTRL 0x15C0 491 #define DMA_CTRL_DMAR_IN_ORDER 0x1 492 #define DMA_CTRL_DMAR_ENH_ORDER 0x2 493 #define DMA_CTRL_DMAR_OUT_ORDER 0x4 494 #define DMA_CTRL_RCB_VALUE 0x8 495 #define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 496 #define DMA_CTRL_DMAR_BURST_LEN_MASK 7 497 #define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 498 #define DMA_CTRL_DMAW_BURST_LEN_MASK 7 499 #define DMA_CTRL_DMAR_REQ_PRI 0x400 500 #define DMA_CTRL_DMAR_DLY_CNT_MASK 0x1F 501 #define DMA_CTRL_DMAR_DLY_CNT_SHIFT 11 502 #define DMA_CTRL_DMAW_DLY_CNT_MASK 0xF 503 #define DMA_CTRL_DMAW_DLY_CNT_SHIFT 16 504 #define DMA_CTRL_TXCMB_EN 0x100000 505 #define DMA_CTRL_RXCMB_EN 0x200000 506 507 508 /* CMB/SMB Control Register */ 509 #define REG_SMB_STAT_TIMER 0x15C4 510 #define REG_TRIG_RRD_THRESH 0x15CA 511 #define REG_TRIG_TPD_THRESH 0x15C8 512 #define REG_TRIG_TXTIMER 0x15CC 513 #define REG_TRIG_RXTIMER 0x15CE 514 515 /* HOST RXF Page 1,2,3 address */ 516 #define REG_HOST_RXF1_PAGE0_LO 0x15D0 517 #define REG_HOST_RXF1_PAGE1_LO 0x15D4 518 #define REG_HOST_RXF2_PAGE0_LO 0x15D8 519 #define REG_HOST_RXF2_PAGE1_LO 0x15DC 520 #define REG_HOST_RXF3_PAGE0_LO 0x15E0 521 #define REG_HOST_RXF3_PAGE1_LO 0x15E4 522 523 /* Mail box */ 524 #define REG_MB_RXF1_RADDR 0x15B4 525 #define REG_MB_RXF2_RADDR 0x15B8 526 #define REG_MB_RXF3_RADDR 0x15BC 527 #define REG_MB_TPD_PROD_IDX 0x15F0 528 529 /* RXF-Page 0-3 PageNo & Valid bit */ 530 #define REG_HOST_RXF0_PAGE0_VLD 0x15F4 531 #define HOST_RXF_VALID 1 532 #define HOST_RXF_PAGENO_SHIFT 1 533 #define HOST_RXF_PAGENO_MASK 0x7F 534 #define REG_HOST_RXF0_PAGE1_VLD 0x15F5 535 #define REG_HOST_RXF1_PAGE0_VLD 0x15F6 536 #define REG_HOST_RXF1_PAGE1_VLD 0x15F7 537 #define REG_HOST_RXF2_PAGE0_VLD 0x15F8 538 #define REG_HOST_RXF2_PAGE1_VLD 0x15F9 539 #define REG_HOST_RXF3_PAGE0_VLD 0x15FA 540 #define REG_HOST_RXF3_PAGE1_VLD 0x15FB 541 542 /* Interrupt Status Register */ 543 #define REG_ISR 0x1600 544 #define ISR_SMB 1 545 #define ISR_TIMER 2 /* Interrupt when Timer is counted down to zero */ 546 /* 547 * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set 548 * in Table 51 Selene Master Control Register (Offset 0x1400). 549 */ 550 #define ISR_MANUAL 4 551 #define ISR_HW_RXF_OV 8 /* RXF overflow interrupt */ 552 #define ISR_HOST_RXF0_OV 0x10 553 #define ISR_HOST_RXF1_OV 0x20 554 #define ISR_HOST_RXF2_OV 0x40 555 #define ISR_HOST_RXF3_OV 0x80 556 #define ISR_TXF_UN 0x100 557 #define ISR_RX0_PAGE_FULL 0x200 558 #define ISR_DMAR_TO_RST 0x400 559 #define ISR_DMAW_TO_RST 0x800 560 #define ISR_GPHY 0x1000 561 #define ISR_TX_CREDIT 0x2000 562 #define ISR_GPHY_LPW 0x4000 /* GPHY low power state interrupt */ 563 #define ISR_RX_PKT 0x10000 /* One packet received, triggered by RFD */ 564 #define ISR_TX_PKT 0x20000 /* One packet transmitted, triggered by TPD */ 565 #define ISR_TX_DMA 0x40000 566 #define ISR_RX_PKT_1 0x80000 567 #define ISR_RX_PKT_2 0x100000 568 #define ISR_RX_PKT_3 0x200000 569 #define ISR_MAC_RX 0x400000 570 #define ISR_MAC_TX 0x800000 571 #define ISR_UR_DETECTED 0x1000000 572 #define ISR_FERR_DETECTED 0x2000000 573 #define ISR_NFERR_DETECTED 0x4000000 574 #define ISR_CERR_DETECTED 0x8000000 575 #define ISR_PHY_LINKDOWN 0x10000000 576 #define ISR_DIS_INT 0x80000000 577 578 579 /* Interrupt Mask Register */ 580 #define REG_IMR 0x1604 581 582 583 #define IMR_NORMAL_MASK (\ 584 ISR_SMB |\ 585 ISR_TXF_UN |\ 586 ISR_HW_RXF_OV |\ 587 ISR_HOST_RXF0_OV|\ 588 ISR_MANUAL |\ 589 ISR_GPHY |\ 590 ISR_GPHY_LPW |\ 591 ISR_DMAR_TO_RST |\ 592 ISR_DMAW_TO_RST |\ 593 ISR_PHY_LINKDOWN|\ 594 ISR_RX_PKT |\ 595 ISR_TX_PKT) 596 597 #define ISR_TX_EVENT (ISR_TXF_UN | ISR_TX_PKT) 598 #define ISR_RX_EVENT (ISR_HOST_RXF0_OV | ISR_HW_RXF_OV | ISR_RX_PKT) 599 600 #define REG_MAC_RX_STATUS_BIN 0x1700 601 #define REG_MAC_RX_STATUS_END 0x175c 602 #define REG_MAC_TX_STATUS_BIN 0x1760 603 #define REG_MAC_TX_STATUS_END 0x17c0 604 605 /* Hardware Offset Register */ 606 #define REG_HOST_RXF0_PAGEOFF 0x1800 607 #define REG_TPD_CONS_IDX 0x1804 608 #define REG_HOST_RXF1_PAGEOFF 0x1808 609 #define REG_HOST_RXF2_PAGEOFF 0x180C 610 #define REG_HOST_RXF3_PAGEOFF 0x1810 611 612 /* RXF-Page 0-3 Offset DMA Address */ 613 #define REG_HOST_RXF0_MB0_LO 0x1820 614 #define REG_HOST_RXF0_MB1_LO 0x1824 615 #define REG_HOST_RXF1_MB0_LO 0x1828 616 #define REG_HOST_RXF1_MB1_LO 0x182C 617 #define REG_HOST_RXF2_MB0_LO 0x1830 618 #define REG_HOST_RXF2_MB1_LO 0x1834 619 #define REG_HOST_RXF3_MB0_LO 0x1838 620 #define REG_HOST_RXF3_MB1_LO 0x183C 621 622 /* Tpd CMB DMA Address */ 623 #define REG_HOST_TX_CMB_LO 0x1840 624 #define REG_HOST_SMB_ADDR_LO 0x1844 625 626 /* DEBUG ADDR */ 627 #define REG_DEBUG_DATA0 0x1900 628 #define REG_DEBUG_DATA1 0x1904 629 630 /***************************** MII definition ***************************************/ 631 /* PHY Common Register */ 632 #define MII_AT001_PSCR 0x10 633 #define MII_AT001_PSSR 0x11 634 #define MII_INT_CTRL 0x12 635 #define MII_INT_STATUS 0x13 636 #define MII_SMARTSPEED 0x14 637 #define MII_LBRERROR 0x18 638 #define MII_RESV2 0x1a 639 640 #define MII_DBG_ADDR 0x1D 641 #define MII_DBG_DATA 0x1E 642 643 /* Autoneg Advertisement Register */ 644 #define MII_AR_DEFAULT_CAP_MASK 0 645 646 /* 1000BASE-T Control Register */ 647 #define MII_AT001_CR_1000T_SPEED_MASK \ 648 (ADVERTISE_1000FULL | ADVERTISE_1000HALF) 649 #define MII_AT001_CR_1000T_DEFAULT_CAP_MASK MII_AT001_CR_1000T_SPEED_MASK 650 651 /* AT001 PHY Specific Control Register */ 652 #define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ 653 #define MII_AT001_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ 654 #define MII_AT001_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ 655 #define MII_AT001_PSCR_MAC_POWERDOWN 0x0008 656 #define MII_AT001_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, 657 * 0=CLK125 toggling 658 */ 659 #define MII_AT001_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ 660 /* Manual MDI configuration */ 661 #define MII_AT001_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ 662 #define MII_AT001_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, 663 * 100BASE-TX/10BASE-T: 664 * MDI Mode 665 */ 666 #define MII_AT001_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled 667 * all speeds. 668 */ 669 #define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE 0x0080 670 /* 1=Enable Extended 10BASE-T distance 671 * (Lower 10BASE-T RX Threshold) 672 * 0=Normal 10BASE-T RX Threshold */ 673 #define MII_AT001_PSCR_MII_5BIT_ENABLE 0x0100 674 /* 1=5-Bit interface in 100BASE-TX 675 * 0=MII interface in 100BASE-TX */ 676 #define MII_AT001_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ 677 #define MII_AT001_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ 678 #define MII_AT001_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ 679 #define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT 1 680 #define MII_AT001_PSCR_AUTO_X_MODE_SHIFT 5 681 #define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 682 /* AT001 PHY Specific Status Register */ 683 #define MII_AT001_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ 684 #define MII_AT001_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ 685 #define MII_AT001_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ 686 #define MII_AT001_PSSR_10MBS 0x0000 /* 00=10Mbs */ 687 #define MII_AT001_PSSR_100MBS 0x4000 /* 01=100Mbs */ 688 #define MII_AT001_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ 689 690 #endif /*_ATHL1E_HW_H_*/ 691