1 /****************************************************************************
2
3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004
4 All rights reserved
5 www.echoaudio.com
6
7 This file is part of Echo Digital Audio's generic driver library.
8
9 Echo Digital Audio's generic driver library is free software;
10 you can redistribute it and/or modify it under the terms of
11 the GNU General Public License as published by the Free Software
12 Foundation.
13
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
18
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 59 Temple Place - Suite 330, Boston,
22 MA 02111-1307, USA.
23
24 ****************************************************************************
25
26 Translation from C++ and adaptation for use in ALSA-Driver
27 were made by Giuliano Pochini <pochini@shiny.it>
28
29 ****************************************************************************
30
31
32 Here's a block diagram of how most of the cards work:
33
34 +-----------+
35 record | |<-------------------- Inputs
36 <-------| | |
37 PCI | Transport | |
38 bus | engine | \|/
39 ------->| | +-------+
40 play | |--->|monitor|-------> Outputs
41 +-----------+ | mixer |
42 +-------+
43
44 The lines going to and from the PCI bus represent "pipes". A pipe performs
45 audio transport - moving audio data to and from buffers on the host via
46 bus mastering.
47
48 The inputs and outputs on the right represent input and output "busses."
49 A bus is a physical, real connection to the outside world. An example
50 of a bus would be the 1/4" analog connectors on the back of Layla or
51 an RCA S/PDIF connector.
52
53 For most cards, there is a one-to-one correspondence between outputs
54 and busses; that is, each individual pipe is hard-wired to a single bus.
55
56 Cards that work this way are Darla20, Gina20, Layla20, Darla24, Gina24,
57 Layla24, Mona, and Indigo.
58
59
60 Mia has a feature called "virtual outputs."
61
62
63 +-----------+
64 record | |<----------------------------- Inputs
65 <-------| | |
66 PCI | Transport | |
67 bus | engine | \|/
68 ------->| | +------+ +-------+
69 play | |-->|vmixer|-->|monitor|-------> Outputs
70 +-----------+ +------+ | mixer |
71 +-------+
72
73
74 Obviously, the difference here is the box labeled "vmixer." Vmixer is
75 short for "virtual output mixer." For Mia, pipes are *not* hard-wired
76 to a single bus; the vmixer lets you mix any pipe to any bus in any
77 combination.
78
79 Note, however, that the left-hand side of the diagram is unchanged.
80 Transport works exactly the same way - the difference is in the mixer stage.
81
82
83 Pipes and busses are numbered starting at zero.
84
85
86
87 Pipe index
88 ==========
89
90 A number of calls in CEchoGals refer to a "pipe index". A pipe index is
91 a unique number for a pipe that unambiguously refers to a playback or record
92 pipe. Pipe indices are numbered starting with analog outputs, followed by
93 digital outputs, then analog inputs, then digital inputs.
94
95 Take Gina24 as an example:
96
97 Pipe index
98
99 0-7 Analog outputs (0 .. FirstDigitalBusOut-1)
100 8-15 Digital outputs (FirstDigitalBusOut .. NumBussesOut-1)
101 16-17 Analog inputs
102 18-25 Digital inputs
103
104
105 You get the pipe index by calling CEchoGals::OpenAudio; the other transport
106 functions take the pipe index as a parameter. If you need a pipe index for
107 some other reason, use the handy Makepipe_index method.
108
109
110 Some calls take a CChannelMask parameter; CChannelMask is a handy way to
111 group pipe indices.
112
113
114
115 Digital mode switch
116 ===================
117
118 Some cards (right now, Gina24, Layla24, and Mona) have a Digital Mode Switch
119 or DMS. Cards with a DMS can be set to one of three mutually exclusive
120 digital modes: S/PDIF RCA, S/PDIF optical, or ADAT optical.
121
122 This may create some confusion since ADAT optical is 8 channels wide and
123 S/PDIF is only two channels wide. Gina24, Layla24, and Mona handle this
124 by acting as if they always have 8 digital outs and ins. If you are in
125 either S/PDIF mode, the last 6 channels don't do anything - data sent
126 out these channels is thrown away and you will always record zeros.
127
128 Note that with Gina24, Layla24, and Mona, sample rates above 50 kHz are
129 only available if you have the card configured for S/PDIF optical or S/PDIF
130 RCA.
131
132
133
134 Double speed mode
135 =================
136
137 Some of the cards support 88.2 kHz and 96 kHz sampling (Darla24, Gina24,
138 Layla24, Mona, Mia, and Indigo). For these cards, the driver sometimes has
139 to worry about "double speed mode"; double speed mode applies whenever the
140 sampling rate is above 50 kHz.
141
142 For instance, Mona and Layla24 support word clock sync. However, they
143 actually support two different word clock modes - single speed (below
144 50 kHz) and double speed (above 50 kHz). The hardware detects if a single
145 or double speed word clock signal is present; the generic code uses that
146 information to determine which mode to use.
147
148 The generic code takes care of all this for you.
149 */
150
151
152 #ifndef _ECHOAUDIO_H_
153 #define _ECHOAUDIO_H_
154
155
156 #define TRUE 1
157 #define FALSE 0
158
159 #include "echoaudio_dsp.h"
160
161
162
163 /***********************************************************************
164
165 PCI configuration space
166
167 ***********************************************************************/
168
169 /*
170 * PCI vendor ID and device IDs for the hardware
171 */
172 #define VENDOR_ID 0x1057
173 #define DEVICE_ID_56301 0x1801
174 #define DEVICE_ID_56361 0x3410
175 #define SUBVENDOR_ID 0xECC0
176
177
178 /*
179 * Valid Echo PCI subsystem card IDs
180 */
181 #define DARLA20 0x0010
182 #define GINA20 0x0020
183 #define LAYLA20 0x0030
184 #define DARLA24 0x0040
185 #define GINA24 0x0050
186 #define LAYLA24 0x0060
187 #define MONA 0x0070
188 #define MIA 0x0080
189 #define INDIGO 0x0090
190 #define INDIGO_IO 0x00a0
191 #define INDIGO_DJ 0x00b0
192 #define DC8 0x00c0
193 #define INDIGO_IOX 0x00d0
194 #define INDIGO_DJX 0x00e0
195 #define ECHO3G 0x0100
196
197
198 /************************************************************************
199
200 Array sizes and so forth
201
202 ***********************************************************************/
203
204 /*
205 * Sizes
206 */
207 #define ECHO_MAXAUDIOINPUTS 32 /* Max audio input channels */
208 #define ECHO_MAXAUDIOOUTPUTS 32 /* Max audio output channels */
209 #define ECHO_MAXAUDIOPIPES 32 /* Max number of input and output
210 * pipes */
211 #define E3G_MAX_OUTPUTS 16
212 #define ECHO_MAXMIDIJACKS 1 /* Max MIDI ports */
213 #define ECHO_MIDI_QUEUE_SZ 512 /* Max MIDI input queue entries */
214 #define ECHO_MTC_QUEUE_SZ 32 /* Max MIDI time code input queue
215 * entries */
216
217 /*
218 * MIDI activity indicator timeout
219 */
220 #define MIDI_ACTIVITY_TIMEOUT_USEC 200000
221
222
223 /****************************************************************************
224
225 Clocks
226
227 *****************************************************************************/
228
229 /*
230 * Clock numbers
231 */
232 #define ECHO_CLOCK_INTERNAL 0
233 #define ECHO_CLOCK_WORD 1
234 #define ECHO_CLOCK_SUPER 2
235 #define ECHO_CLOCK_SPDIF 3
236 #define ECHO_CLOCK_ADAT 4
237 #define ECHO_CLOCK_ESYNC 5
238 #define ECHO_CLOCK_ESYNC96 6
239 #define ECHO_CLOCK_MTC 7
240 #define ECHO_CLOCK_NUMBER 8
241 #define ECHO_CLOCKS 0xffff
242
243 /*
244 * Clock bit numbers - used to report capabilities and whatever clocks
245 * are being detected dynamically.
246 */
247 #define ECHO_CLOCK_BIT_INTERNAL (1 << ECHO_CLOCK_INTERNAL)
248 #define ECHO_CLOCK_BIT_WORD (1 << ECHO_CLOCK_WORD)
249 #define ECHO_CLOCK_BIT_SUPER (1 << ECHO_CLOCK_SUPER)
250 #define ECHO_CLOCK_BIT_SPDIF (1 << ECHO_CLOCK_SPDIF)
251 #define ECHO_CLOCK_BIT_ADAT (1 << ECHO_CLOCK_ADAT)
252 #define ECHO_CLOCK_BIT_ESYNC (1 << ECHO_CLOCK_ESYNC)
253 #define ECHO_CLOCK_BIT_ESYNC96 (1 << ECHO_CLOCK_ESYNC96)
254 #define ECHO_CLOCK_BIT_MTC (1<<ECHO_CLOCK_MTC)
255
256
257 /***************************************************************************
258
259 Digital modes
260
261 ****************************************************************************/
262
263 /*
264 * Digital modes for Mona, Layla24, and Gina24
265 */
266 #define DIGITAL_MODE_NONE 0xFF
267 #define DIGITAL_MODE_SPDIF_RCA 0
268 #define DIGITAL_MODE_SPDIF_OPTICAL 1
269 #define DIGITAL_MODE_ADAT 2
270 #define DIGITAL_MODE_SPDIF_CDROM 3
271 #define DIGITAL_MODES 4
272
273 /*
274 * Digital mode capability masks
275 */
276 #define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA (1 << DIGITAL_MODE_SPDIF_RCA)
277 #define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL (1 << DIGITAL_MODE_SPDIF_OPTICAL)
278 #define ECHOCAPS_HAS_DIGITAL_MODE_ADAT (1 << DIGITAL_MODE_ADAT)
279 #define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM (1 << DIGITAL_MODE_SPDIF_CDROM)
280
281
282 #define EXT_3GBOX_NC 0x01 /* 3G box not connected */
283 #define EXT_3GBOX_NOT_SET 0x02 /* 3G box not detected yet */
284
285
286 #define ECHOGAIN_MUTED (-128) /* Minimum possible gain */
287 #define ECHOGAIN_MINOUT (-128) /* Min output gain (dB) */
288 #define ECHOGAIN_MAXOUT (6) /* Max output gain (dB) */
289 #define ECHOGAIN_MININP (-50) /* Min input gain (0.5 dB) */
290 #define ECHOGAIN_MAXINP (50) /* Max input gain (0.5 dB) */
291
292 #define PIPE_STATE_STOPPED 0 /* Pipe has been reset */
293 #define PIPE_STATE_PAUSED 1 /* Pipe has been stopped */
294 #define PIPE_STATE_STARTED 2 /* Pipe has been started */
295 #define PIPE_STATE_PENDING 3 /* Pipe has pending start */
296
297
298 /* Debug initialization */
299 #ifdef CONFIG_SND_DEBUG
300 #define DE_INIT(x) snd_printk x
301 #else
302 #define DE_INIT(x)
303 #endif
304
305 /* Debug hw_params callbacks */
306 #ifdef CONFIG_SND_DEBUG
307 #define DE_HWP(x) snd_printk x
308 #else
309 #define DE_HWP(x)
310 #endif
311
312 /* Debug normal activity (open, start, stop...) */
313 #ifdef CONFIG_SND_DEBUG
314 #define DE_ACT(x) snd_printk x
315 #else
316 #define DE_ACT(x)
317 #endif
318
319 /* Debug midi activity */
320 #ifdef CONFIG_SND_DEBUG
321 #define DE_MID(x) snd_printk x
322 #else
323 #define DE_MID(x)
324 #endif
325
326
327 struct audiopipe {
328 volatile u32 *dma_counter; /* Commpage register that contains
329 * the current dma position
330 * (lower 32 bits only)
331 */
332 u32 last_counter; /* The last position, which is used
333 * to compute...
334 */
335 u32 position; /* ...the number of bytes tranferred
336 * by the DMA engine, modulo the
337 * buffer size
338 */
339 short index; /* Index of the first channel or <0
340 * if hw is not configured yet
341 */
342 short interleave;
343 struct snd_dma_buffer sgpage; /* Room for the scatter-gather list */
344 struct snd_pcm_hardware hw;
345 struct snd_pcm_hw_constraint_list constr;
346 short sglist_head;
347 char state; /* pipe state */
348 };
349
350
351 struct audioformat {
352 u8 interleave; /* How the data is arranged in memory:
353 * mono = 1, stereo = 2, ...
354 */
355 u8 bits_per_sample; /* 8, 16, 24, 32 (24 bits left aligned) */
356 char mono_to_stereo; /* Only used if interleave is 1 and
357 * if this is an output pipe.
358 */
359 char data_are_bigendian; /* 1 = big endian, 0 = little endian */
360 };
361
362
363 struct echoaudio {
364 spinlock_t lock;
365 struct snd_pcm_substream *substream[DSP_MAXPIPES];
366 int last_period[DSP_MAXPIPES];
367 struct mutex mode_mutex;
368 u16 num_digital_modes, digital_mode_list[6];
369 u16 num_clock_sources, clock_source_list[10];
370 atomic_t opencount;
371 struct snd_kcontrol *clock_src_ctl;
372 struct snd_pcm *analog_pcm, *digital_pcm;
373 struct snd_card *card;
374 const char *card_name;
375 struct pci_dev *pci;
376 unsigned long dsp_registers_phys;
377 struct resource *iores;
378 struct snd_dma_buffer commpage_dma_buf;
379 int irq;
380 #ifdef ECHOCARD_HAS_MIDI
381 struct snd_rawmidi *rmidi;
382 struct snd_rawmidi_substream *midi_in, *midi_out;
383 #endif
384 struct timer_list timer;
385 char tinuse; /* Timer in use */
386 char midi_full; /* MIDI output buffer is full */
387 char can_set_rate;
388 char rate_set;
389
390 /* This stuff is used mainly by the lowlevel code */
391 struct comm_page *comm_page; /* Virtual address of the memory
392 * seen by DSP
393 */
394 u32 pipe_alloc_mask; /* Bitmask of allocated pipes */
395 u32 pipe_cyclic_mask; /* Bitmask of pipes with cyclic
396 * buffers
397 */
398 u32 sample_rate; /* Card sample rate in Hz */
399 u8 digital_mode; /* Current digital mode
400 * (see DIGITAL_MODE_*)
401 */
402 u8 spdif_status; /* Gina20, Darla20, Darla24 - only */
403 u8 clock_state; /* Gina20, Darla20, Darla24 - only */
404 u8 input_clock; /* Currently selected sample clock
405 * source
406 */
407 u8 output_clock; /* Layla20 only */
408 char meters_enabled; /* VU-meters status */
409 char asic_loaded; /* Set TRUE when ASIC loaded */
410 char bad_board; /* Set TRUE if DSP won't load */
411 char professional_spdif; /* 0 = consumer; 1 = professional */
412 char non_audio_spdif; /* 3G - only */
413 char digital_in_automute; /* Gina24, Layla24, Mona - only */
414 char has_phantom_power;
415 char hasnt_input_nominal_level; /* Gina3G */
416 char phantom_power; /* Gina3G - only */
417 char has_midi;
418 char midi_input_enabled;
419
420 #ifdef ECHOCARD_ECHO3G
421 /* External module -dependent pipe and bus indexes */
422 char px_digital_out, px_analog_in, px_digital_in, px_num;
423 char bx_digital_out, bx_analog_in, bx_digital_in, bx_num;
424 #endif
425
426 char nominal_level[ECHO_MAXAUDIOPIPES]; /* True == -10dBV
427 * False == +4dBu */
428 s8 input_gain[ECHO_MAXAUDIOINPUTS]; /* Input level -50..+50
429 * unit is 0.5dB */
430 s8 output_gain[ECHO_MAXAUDIOOUTPUTS]; /* Output level -128..+6 dB
431 * (-128=muted) */
432 s8 monitor_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOINPUTS];
433 /* -128..+6 dB */
434 s8 vmixer_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOOUTPUTS];
435 /* -128..+6 dB */
436
437 u16 digital_modes; /* Bitmask of supported modes
438 * (see ECHOCAPS_HAS_DIGITAL_MODE_*) */
439 u16 input_clock_types; /* Suppoted input clock types */
440 u16 output_clock_types; /* Suppoted output clock types -
441 * Layla20 only */
442 u16 device_id, subdevice_id;
443 u16 *dsp_code; /* Current DSP code loaded,
444 * NULL if nothing loaded */
445 short dsp_code_to_load; /* DSP code to load */
446 short asic_code; /* Current ASIC code */
447 u32 comm_page_phys; /* Physical address of the
448 * memory seen by DSP */
449 volatile u32 __iomem *dsp_registers; /* DSP's register base */
450 u32 active_mask; /* Chs. active mask or
451 * punks out */
452 #ifdef CONFIG_PM
453 const struct firmware *fw_cache[8]; /* Cached firmwares */
454 #endif
455
456 #ifdef ECHOCARD_HAS_MIDI
457 u16 mtc_state; /* State for MIDI input parsing state machine */
458 u8 midi_buffer[MIDI_IN_BUFFER_SIZE];
459 #endif
460 };
461
462
463 static int init_dsp_comm_page(struct echoaudio *chip);
464 static int init_line_levels(struct echoaudio *chip);
465 static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe);
466 static int load_firmware(struct echoaudio *chip);
467 static int wait_handshake(struct echoaudio *chip);
468 static int send_vector(struct echoaudio *chip, u32 command);
469 static int get_firmware(const struct firmware **fw_entry,
470 struct echoaudio *chip, const short fw_index);
471 static void free_firmware(const struct firmware *fw_entry);
472
473 #ifdef ECHOCARD_HAS_MIDI
474 static int enable_midi_input(struct echoaudio *chip, char enable);
475 static void snd_echo_midi_output_trigger(
476 struct snd_rawmidi_substream *substream, int up);
477 static int midi_service_irq(struct echoaudio *chip);
478 static int __devinit snd_echo_midi_create(struct snd_card *card,
479 struct echoaudio *chip);
480 #endif
481
482
clear_handshake(struct echoaudio * chip)483 static inline void clear_handshake(struct echoaudio *chip)
484 {
485 chip->comm_page->handshake = 0;
486 }
487
get_dsp_register(struct echoaudio * chip,u32 index)488 static inline u32 get_dsp_register(struct echoaudio *chip, u32 index)
489 {
490 return readl(&chip->dsp_registers[index]);
491 }
492
set_dsp_register(struct echoaudio * chip,u32 index,u32 value)493 static inline void set_dsp_register(struct echoaudio *chip, u32 index,
494 u32 value)
495 {
496 writel(value, &chip->dsp_registers[index]);
497 }
498
499
500 /* Pipe and bus indexes. PX_* and BX_* are defined as chip->px_* and chip->bx_*
501 for 3G cards because they depend on the external box. They are integer
502 constants for all other cards.
503 Never use those defines directly, use the following functions instead. */
504
px_digital_out(const struct echoaudio * chip)505 static inline int px_digital_out(const struct echoaudio *chip)
506 {
507 return PX_DIGITAL_OUT;
508 }
509
px_analog_in(const struct echoaudio * chip)510 static inline int px_analog_in(const struct echoaudio *chip)
511 {
512 return PX_ANALOG_IN;
513 }
514
px_digital_in(const struct echoaudio * chip)515 static inline int px_digital_in(const struct echoaudio *chip)
516 {
517 return PX_DIGITAL_IN;
518 }
519
px_num(const struct echoaudio * chip)520 static inline int px_num(const struct echoaudio *chip)
521 {
522 return PX_NUM;
523 }
524
bx_digital_out(const struct echoaudio * chip)525 static inline int bx_digital_out(const struct echoaudio *chip)
526 {
527 return BX_DIGITAL_OUT;
528 }
529
bx_analog_in(const struct echoaudio * chip)530 static inline int bx_analog_in(const struct echoaudio *chip)
531 {
532 return BX_ANALOG_IN;
533 }
534
bx_digital_in(const struct echoaudio * chip)535 static inline int bx_digital_in(const struct echoaudio *chip)
536 {
537 return BX_DIGITAL_IN;
538 }
539
bx_num(const struct echoaudio * chip)540 static inline int bx_num(const struct echoaudio *chip)
541 {
542 return BX_NUM;
543 }
544
num_pipes_out(const struct echoaudio * chip)545 static inline int num_pipes_out(const struct echoaudio *chip)
546 {
547 return px_analog_in(chip);
548 }
549
num_pipes_in(const struct echoaudio * chip)550 static inline int num_pipes_in(const struct echoaudio *chip)
551 {
552 return px_num(chip) - px_analog_in(chip);
553 }
554
num_busses_out(const struct echoaudio * chip)555 static inline int num_busses_out(const struct echoaudio *chip)
556 {
557 return bx_analog_in(chip);
558 }
559
num_busses_in(const struct echoaudio * chip)560 static inline int num_busses_in(const struct echoaudio *chip)
561 {
562 return bx_num(chip) - bx_analog_in(chip);
563 }
564
num_analog_busses_out(const struct echoaudio * chip)565 static inline int num_analog_busses_out(const struct echoaudio *chip)
566 {
567 return bx_digital_out(chip);
568 }
569
num_analog_busses_in(const struct echoaudio * chip)570 static inline int num_analog_busses_in(const struct echoaudio *chip)
571 {
572 return bx_digital_in(chip) - bx_analog_in(chip);
573 }
574
num_digital_busses_out(const struct echoaudio * chip)575 static inline int num_digital_busses_out(const struct echoaudio *chip)
576 {
577 return num_busses_out(chip) - num_analog_busses_out(chip);
578 }
579
num_digital_busses_in(const struct echoaudio * chip)580 static inline int num_digital_busses_in(const struct echoaudio *chip)
581 {
582 return num_busses_in(chip) - num_analog_busses_in(chip);
583 }
584
585 /* The monitor array is a one-dimensional array; compute the offset
586 * into the array */
monitor_index(const struct echoaudio * chip,int out,int in)587 static inline int monitor_index(const struct echoaudio *chip, int out, int in)
588 {
589 return out * num_busses_in(chip) + in;
590 }
591
592
593 #ifndef pci_device
594 #define pci_device(chip) (&chip->pci->dev)
595 #endif
596
597
598 #endif /* _ECHOAUDIO_H_ */
599