1 /***********************license start***************
2 * Author: Cavium Networks
3 *
4 * Contact: support@caviumnetworks.com
5 * This file is part of the OCTEON SDK
6 *
7 * Copyright (c) 2003-2008 Cavium Networks
8 *
9 * This file is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License, Version 2, as
11 * published by the Free Software Foundation.
12 *
13 * This file is distributed in the hope that it will be useful, but
14 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16 * NONINFRINGEMENT. See the GNU General Public License for more
17 * details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this file; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 * or visit http://www.gnu.org/licenses/.
23 *
24 * This file may also be available under a different license from Cavium.
25 * Contact Cavium Networks for more information
26 ***********************license end**************************************/
27
28 /*
29 *
30 * This file contains defines for the SPI interface
31 */
32 #ifndef __CVMX_SPI_H__
33 #define __CVMX_SPI_H__
34
35 #include "cvmx-gmxx-defs.h"
36
37 /* CSR typedefs have been moved to cvmx-csr-*.h */
38
39 typedef enum {
40 CVMX_SPI_MODE_UNKNOWN = 0,
41 CVMX_SPI_MODE_TX_HALFPLEX = 1,
42 CVMX_SPI_MODE_RX_HALFPLEX = 2,
43 CVMX_SPI_MODE_DUPLEX = 3
44 } cvmx_spi_mode_t;
45
46 /** Callbacks structure to customize SPI4 initialization sequence */
47 typedef struct {
48 /** Called to reset SPI4 DLL */
49 int (*reset_cb) (int interface, cvmx_spi_mode_t mode);
50
51 /** Called to setup calendar */
52 int (*calendar_setup_cb) (int interface, cvmx_spi_mode_t mode,
53 int num_ports);
54
55 /** Called for Tx and Rx clock detection */
56 int (*clock_detect_cb) (int interface, cvmx_spi_mode_t mode,
57 int timeout);
58
59 /** Called to perform link training */
60 int (*training_cb) (int interface, cvmx_spi_mode_t mode, int timeout);
61
62 /** Called for calendar data synchronization */
63 int (*calendar_sync_cb) (int interface, cvmx_spi_mode_t mode,
64 int timeout);
65
66 /** Called when interface is up */
67 int (*interface_up_cb) (int interface, cvmx_spi_mode_t mode);
68
69 } cvmx_spi_callbacks_t;
70
71 /**
72 * Return true if the supplied interface is configured for SPI
73 *
74 * @interface: Interface to check
75 * Returns True if interface is SPI
76 */
cvmx_spi_is_spi_interface(int interface)77 static inline int cvmx_spi_is_spi_interface(int interface)
78 {
79 uint64_t gmxState = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
80 return (gmxState & 0x2) && (gmxState & 0x1);
81 }
82
83 /**
84 * Initialize and start the SPI interface.
85 *
86 * @interface: The identifier of the packet interface to configure and
87 * use as a SPI interface.
88 * @mode: The operating mode for the SPI interface. The interface
89 * can operate as a full duplex (both Tx and Rx data paths
90 * active) or as a halfplex (either the Tx data path is
91 * active or the Rx data path is active, but not both).
92 * @timeout: Timeout to wait for clock synchronization in seconds
93 * @num_ports: Number of SPI ports to configure
94 *
95 * Returns Zero on success, negative of failure.
96 */
97 extern int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode,
98 int timeout, int num_ports);
99
100 /**
101 * This routine restarts the SPI interface after it has lost synchronization
102 * with its corespondant system.
103 *
104 * @interface: The identifier of the packet interface to configure and
105 * use as a SPI interface.
106 * @mode: The operating mode for the SPI interface. The interface
107 * can operate as a full duplex (both Tx and Rx data paths
108 * active) or as a halfplex (either the Tx data path is
109 * active or the Rx data path is active, but not both).
110 * @timeout: Timeout to wait for clock synchronization in seconds
111 * Returns Zero on success, negative of failure.
112 */
113 extern int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode,
114 int timeout);
115
116 /**
117 * Return non-zero if the SPI interface has a SPI4000 attached
118 *
119 * @interface: SPI interface the SPI4000 is connected to
120 *
121 * Returns
122 */
cvmx_spi4000_is_present(int interface)123 static inline int cvmx_spi4000_is_present(int interface)
124 {
125 return 0;
126 }
127
128 /**
129 * Initialize the SPI4000 for use
130 *
131 * @interface: SPI interface the SPI4000 is connected to
132 */
cvmx_spi4000_initialize(int interface)133 static inline int cvmx_spi4000_initialize(int interface)
134 {
135 return 0;
136 }
137
138 /**
139 * Poll all the SPI4000 port and check its speed
140 *
141 * @interface: Interface the SPI4000 is on
142 * @port: Port to poll (0-9)
143 * Returns Status of the port. 0=down. All other values the port is up.
144 */
cvmx_spi4000_check_speed(int interface,int port)145 static inline union cvmx_gmxx_rxx_rx_inbnd cvmx_spi4000_check_speed(
146 int interface,
147 int port)
148 {
149 union cvmx_gmxx_rxx_rx_inbnd r;
150 r.u64 = 0;
151 return r;
152 }
153
154 /**
155 * Get current SPI4 initialization callbacks
156 *
157 * @callbacks: Pointer to the callbacks structure.to fill
158 *
159 * Returns Pointer to cvmx_spi_callbacks_t structure.
160 */
161 extern void cvmx_spi_get_callbacks(cvmx_spi_callbacks_t *callbacks);
162
163 /**
164 * Set new SPI4 initialization callbacks
165 *
166 * @new_callbacks: Pointer to an updated callbacks structure.
167 */
168 extern void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks);
169
170 /**
171 * Callback to perform SPI4 reset
172 *
173 * @interface: The identifier of the packet interface to configure and
174 * use as a SPI interface.
175 * @mode: The operating mode for the SPI interface. The interface
176 * can operate as a full duplex (both Tx and Rx data paths
177 * active) or as a halfplex (either the Tx data path is
178 * active or the Rx data path is active, but not both).
179 *
180 * Returns Zero on success, non-zero error code on failure (will cause
181 * SPI initialization to abort)
182 */
183 extern int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode);
184
185 /**
186 * Callback to setup calendar and miscellaneous settings before clock
187 * detection
188 *
189 * @interface: The identifier of the packet interface to configure and
190 * use as a SPI interface.
191 * @mode: The operating mode for the SPI interface. The interface
192 * can operate as a full duplex (both Tx and Rx data paths
193 * active) or as a halfplex (either the Tx data path is
194 * active or the Rx data path is active, but not both).
195 * @num_ports: Number of ports to configure on SPI
196 *
197 * Returns Zero on success, non-zero error code on failure (will cause
198 * SPI initialization to abort)
199 */
200 extern int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode,
201 int num_ports);
202
203 /**
204 * Callback to perform clock detection
205 *
206 * @interface: The identifier of the packet interface to configure and
207 * use as a SPI interface.
208 * @mode: The operating mode for the SPI interface. The interface
209 * can operate as a full duplex (both Tx and Rx data paths
210 * active) or as a halfplex (either the Tx data path is
211 * active or the Rx data path is active, but not both).
212 * @timeout: Timeout to wait for clock synchronization in seconds
213 *
214 * Returns Zero on success, non-zero error code on failure (will cause
215 * SPI initialization to abort)
216 */
217 extern int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode,
218 int timeout);
219
220 /**
221 * Callback to perform link training
222 *
223 * @interface: The identifier of the packet interface to configure and
224 * use as a SPI interface.
225 * @mode: The operating mode for the SPI interface. The interface
226 * can operate as a full duplex (both Tx and Rx data paths
227 * active) or as a halfplex (either the Tx data path is
228 * active or the Rx data path is active, but not both).
229 * @timeout: Timeout to wait for link to be trained (in seconds)
230 *
231 * Returns Zero on success, non-zero error code on failure (will cause
232 * SPI initialization to abort)
233 */
234 extern int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode,
235 int timeout);
236
237 /**
238 * Callback to perform calendar data synchronization
239 *
240 * @interface: The identifier of the packet interface to configure and
241 * use as a SPI interface.
242 * @mode: The operating mode for the SPI interface. The interface
243 * can operate as a full duplex (both Tx and Rx data paths
244 * active) or as a halfplex (either the Tx data path is
245 * active or the Rx data path is active, but not both).
246 * @timeout: Timeout to wait for calendar data in seconds
247 *
248 * Returns Zero on success, non-zero error code on failure (will cause
249 * SPI initialization to abort)
250 */
251 extern int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode,
252 int timeout);
253
254 /**
255 * Callback to handle interface up
256 *
257 * @interface: The identifier of the packet interface to configure and
258 * use as a SPI interface.
259 * @mode: The operating mode for the SPI interface. The interface
260 * can operate as a full duplex (both Tx and Rx data paths
261 * active) or as a halfplex (either the Tx data path is
262 * active or the Rx data path is active, but not both).
263 *
264 * Returns Zero on success, non-zero error code on failure (will cause
265 * SPI initialization to abort)
266 */
267 extern int cvmx_spi_interface_up_cb(int interface, cvmx_spi_mode_t mode);
268
269 #endif /* __CVMX_SPI_H__ */
270