Home
last modified time | relevance | path

Searched refs:CTRL (Results 1 – 25 of 44) sorted by relevance

12

/linux-3.4.99/drivers/rtc/
Drtc-at32ap700x.c127 rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) in at32_rtc_setalarm()
130 rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) in at32_rtc_setalarm()
149 rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) in at32_rtc_alarm_irq_enable()
154 rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) in at32_rtc_alarm_irq_enable()
177 rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) in at32_rtc_interrupt()
240 if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) { in at32_rtc_probe()
241 rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR)); in at32_rtc_probe()
243 rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe) in at32_rtc_probe()
/linux-3.4.99/drivers/scsi/arm/
Dcumana_1.c54 #define CTRL 0x16fc macro
67 writeb(0x02, priv(host)->base + CTRL); in NCR5380_pwrite()
92 writeb(0x12, priv(host)->base + CTRL); in NCR5380_pwrite()
118 writeb(priv(host)->ctrl | 0x40, priv(host)->base + CTRL); in NCR5380_pwrite()
130 writeb(0x00, priv(host)->base + CTRL); in NCR5380_pread()
154 writeb(0x10, priv(host)->base + CTRL); in NCR5380_pread()
180 writeb(priv(host)->ctrl | 0x40, priv(host)->base + CTRL); in NCR5380_pread()
189 writeb(0, base + CTRL); in cumanascsi_read()
194 writeb(0x40, base + CTRL); in cumanascsi_read()
203 writeb(0, base + CTRL); in cumanascsi_write()
[all …]
/linux-3.4.99/drivers/net/ethernet/intel/e1000e/
Dmac.c497 ctrl = er32(CTRL); in e1000e_check_for_fiber_link()
522 ctrl = er32(CTRL); in e1000e_check_for_fiber_link()
524 ew32(CTRL, ctrl); in e1000e_check_for_fiber_link()
541 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000e_check_for_fiber_link()
564 ctrl = er32(CTRL); in e1000e_check_for_serdes_link()
587 ctrl = er32(CTRL); in e1000e_check_for_serdes_link()
589 ew32(CTRL, ctrl); in e1000e_check_for_serdes_link()
606 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000e_check_for_serdes_link()
886 ctrl = er32(CTRL); in e1000e_setup_fiber_serdes_link()
906 ew32(CTRL, ctrl); in e1000e_setup_fiber_serdes_link()
[all …]
D82571.c1041 ctrl = er32(CTRL); in e1000_reset_hw_82571()
1044 ew32(CTRL, ctrl | E1000_CTRL_RST); in e1000_reset_hw_82571()
1245 reg = er32(CTRL); in e1000_initialize_hw_bits_82571()
1247 ew32(CTRL, reg); in e1000_initialize_hw_bits_82571()
1472 ctrl = er32(CTRL); in e1000_setup_copper_link_82571()
1475 ew32(CTRL, ctrl); in e1000_setup_copper_link_82571()
1553 ctrl = er32(CTRL); in e1000_check_for_serdes_link_82571()
1589 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000_check_for_serdes_link_82571()
1625 ew32(CTRL, ctrl); in e1000_check_for_serdes_link_82571()
1648 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); in e1000_check_for_serdes_link_82571()
Dethtool.c403 regs_buff[0] = er32(CTRL); in e1000_get_regs()
1239 ctrl_reg = er32(CTRL); in e1000_integrated_phy_loopback()
1246 ew32(CTRL, ctrl_reg); in e1000_integrated_phy_loopback()
1319 ctrl_reg = er32(CTRL); in e1000_integrated_phy_loopback()
1341 ew32(CTRL, ctrl_reg); in e1000_integrated_phy_loopback()
1358 u32 ctrl = er32(CTRL); in e1000_set_82571_fiber_loopback()
1368 ew32(CTRL, ctrl); in e1000_set_82571_fiber_loopback()
1379 ctrl = er32(CTRL); in e1000_set_82571_fiber_loopback()
1381 ew32(CTRL, ctrl); in e1000_set_82571_fiber_loopback()
1401 u32 ctrl = er32(CTRL); in e1000_set_es2lan_mac_loopback()
[all …]
Dich8lan.c290 ctrl = er32(CTRL); in e1000_toggle_lanphypc_value_ich8lan()
293 ew32(CTRL, ctrl); in e1000_toggle_lanphypc_value_ich8lan()
297 ew32(CTRL, ctrl); in e1000_toggle_lanphypc_value_ich8lan()
1250 ctrl_reg = er32(CTRL); in e1000_configure_k1_ich8lan()
1254 ew32(CTRL, reg); in e1000_configure_k1_ich8lan()
1259 ew32(CTRL, ctrl_reg); in e1000_configure_k1_ich8lan()
3109 ctrl = er32(CTRL); in e1000_reset_hw_ich8lan()
3129 ew32(CTRL, (ctrl | E1000_CTRL_RST)); in e1000_reset_hw_ich8lan()
3388 ctrl = er32(CTRL); in e1000_setup_copper_link_ich8lan()
3391 ew32(CTRL, ctrl); in e1000_setup_copper_link_ich8lan()
[all …]
D80003es2lan.c787 ctrl = er32(CTRL); in e1000_reset_hw_80003es2lan()
791 ew32(CTRL, ctrl | E1000_CTRL_RST); in e1000_reset_hw_80003es2lan()
1105 ctrl = er32(CTRL); in e1000_setup_copper_link_80003es2lan()
1108 ew32(CTRL, ctrl); in e1000_setup_copper_link_80003es2lan()
/linux-3.4.99/drivers/scsi/
Dmac_scsi.c108 #define CTRL(p,v) (*ctrl = (v))
116 CTRL(iobase, 0);
118 CTRL(iobase, 0x40);
128 CTRL(iobase, 0);
130 CTRL(iobase, 0x40);
/linux-3.4.99/drivers/watchdog/
Dat32ap700x_wdt.c96 psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f); in at32_wdt_stop()
97 wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55)); in at32_wdt_stop()
98 wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa)); in at32_wdt_stop()
111 wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN) in at32_wdt_start()
114 wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN) in at32_wdt_start()
/linux-3.4.99/drivers/net/ethernet/intel/e1000/
De1000_hw.c444 ctrl = er32(CTRL); in e1000_reset_hw()
448 ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST)); in e1000_reset_hw()
469 E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST)); in e1000_reset_hw()
478 ew32(CTRL, (ctrl | E1000_CTRL_RST)); in e1000_reset_hw()
623 ctrl = er32(CTRL); in e1000_init_hw()
624 ew32(CTRL, ctrl | E1000_CTRL_PRIOR); in e1000_init_hw()
851 ctrl = er32(CTRL); in e1000_setup_fiber_serdes_link()
923 ew32(CTRL, ctrl); in e1000_setup_fiber_serdes_link()
936 (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { in e1000_setup_fiber_serdes_link()
1043 ctrl = er32(CTRL); in e1000_copper_link_preconfig()
[all …]
De1000_ethtool.c323 regs_buff[0] = er32(CTRL); in e1000_get_regs()
1129 ctrl_reg = er32(CTRL); in e1000_nonintegrated_phy_loopback()
1136 ew32(CTRL, ctrl_reg); in e1000_nonintegrated_phy_loopback()
1206 ctrl_reg = er32(CTRL); in e1000_integrated_phy_loopback()
1212 ctrl_reg = er32(CTRL); in e1000_integrated_phy_loopback()
1230 ew32(CTRL, ctrl_reg); in e1000_integrated_phy_loopback()
/linux-3.4.99/Documentation/
DSAK.txt24 What key sequence should you use? Well, CTRL-ALT-DEL is used to reboot
25 the machine. CTRL-ALT-BACKSPACE is magical to the X server. We'll
26 choose CTRL-ALT-PAUSE.
/linux-3.4.99/sound/pci/ali5451/
Dali5451.c1016 unsigned int CTRL, in snd_ali_write_voice_regs() argument
1029 ((CTRL & 0x0000000f) << 12) | in snd_ali_write_voice_regs()
1077 unsigned int CTRL; in snd_ali_control_mode() local
1083 CTRL = 0x00000001; in snd_ali_control_mode()
1085 CTRL |= 0x00000008; /* 16-bit data */ in snd_ali_control_mode()
1087 CTRL |= 0x00000002; /* signed data */ in snd_ali_control_mode()
1089 CTRL |= 0x00000004; /* stereo data */ in snd_ali_control_mode()
1090 return CTRL; in snd_ali_control_mode()
1238 unsigned int CTRL; in snd_ali_playback_prepare() local
1277 CTRL = snd_ali_control_mode(substream); in snd_ali_playback_prepare()
[all …]
/linux-3.4.99/drivers/mmc/host/
Ddw_mmc.c324 temp = mci_readl(host, CTRL); in dw_mci_idmac_stop_dma()
327 mci_writel(host, CTRL, temp); in dw_mci_idmac_stop_dma()
392 temp = mci_readl(host, CTRL); in dw_mci_idmac_start_dma()
394 mci_writel(host, CTRL, temp); in dw_mci_idmac_start_dma()
542 temp = mci_readl(host, CTRL); in dw_mci_submit_data_dma()
544 mci_writel(host, CTRL, temp); in dw_mci_submit_data_dma()
588 temp = mci_readl(host, CTRL); in dw_mci_submit_data()
590 mci_writel(host, CTRL, temp); in dw_mci_submit_data()
1052 ctrl = mci_readl(host, CTRL); in dw_mci_tasklet_func()
1054 mci_writel(host, CTRL, ctrl); in dw_mci_tasklet_func()
[all …]
/linux-3.4.99/sound/pci/trident/
Dtrident_main.c454 ((voice->CTRL & 0x0000000f) << 12); in snd_trident_write_voice_regs()
593 outw((voice->CTRL << 12) | voice->Vol, in snd_trident_write_vol_reg()
764 unsigned int CTRL; in snd_trident_control_mode() local
770 CTRL = 0x00000001; in snd_trident_control_mode()
772 CTRL |= 0x00000008; // 16-bit data in snd_trident_control_mode()
774 CTRL |= 0x00000002; // signed data in snd_trident_control_mode()
776 CTRL |= 0x00000004; // stereo data in snd_trident_control_mode()
777 return CTRL; in snd_trident_control_mode()
969 voice->CTRL = snd_trident_control_mode(substream); in snd_trident_playback_prepare()
995 evoice->CTRL = voice->CTRL; in snd_trident_playback_prepare()
[all …]
/linux-3.4.99/drivers/net/ethernet/intel/igbvf/
Dvf.c134 ctrl = er32(CTRL); in e1000_reset_hw_vf()
135 ew32(CTRL, ctrl | E1000_CTRL_RST); in e1000_reset_hw_vf()
/linux-3.4.99/include/linux/mtd/
Dfsmc.h36 #define CTRL 0x0 macro
/linux-3.4.99/drivers/usb/gadget/
Datmel_usba_udc.c986 ctrl = usba_readl(udc, CTRL); in usba_udc_wakeup()
987 usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP); in usba_udc_wakeup()
1124 regval = usba_readl(udc, CTRL); in set_address()
1126 usba_writel(udc, CTRL, regval); in set_address()
1404 usba_writel(udc, CTRL, (usba_readl(udc, CTRL) in usba_control_irq()
1776 usba_writel(udc, CTRL, USBA_ENABLE_MASK); in usba_vbus_irq()
1782 usba_writel(udc, CTRL, USBA_DISABLE_MASK); in usba_vbus_irq()
1839 usba_writel(udc, CTRL, USBA_ENABLE_MASK); in atmel_usba_start()
1872 usba_writel(udc, CTRL, USBA_DISABLE_MASK); in atmel_usba_stop()
1946 usba_writel(udc, CTRL, USBA_DISABLE_MASK); in usba_udc_probe()
/linux-3.4.99/sound/atmel/
Dabdac.c247 dac_writel(dac, CTRL, DAC_BIT(EN)); in atmel_abdac_trigger()
254 dac_writel(dac, CTRL, 0); in atmel_abdac_trigger()
460 dac_writel(dac, CTRL, 0); in atmel_abdac_probe()
/linux-3.4.99/tools/perf/util/ui/browsers/
Dmap.c35 newtFormAddHotKey(form, CTRL('c')); in ui_entry__read()
Dhists.c999 case CTRL('c'): in perf_evsel__hists_browse()
1100 if ((err == 'q' || err == CTRL('c')) in perf_evsel__hists_browse()
1263 case CTRL('c'): in perf_evsel_menu__run()
1276 case CTRL('c'): in perf_evsel_menu__run()
/linux-3.4.99/Documentation/zh_CN/
Demail-clients.txt76 当写邮件时，光标应该放在补丁会出现的地方，然后按下CTRL-R组合键，使指定的
/linux-3.4.99/tools/perf/util/ui/
Dutil.c45 case CTRL('c'): in popup_menu__run()
/linux-3.4.99/Documentation/usb/
DURB.txt62 // (OUT) sometimes only part of CTRL/BULK/INTR transfer_buffer is used
65 // (IN) setup stage for CTRL (pass a struct usb_ctrlrequest)
90 you want to schedule. For CTRL/BULK/INT, use 0. The mem_flags parameter
/linux-3.4.99/include/sound/
Dtrident.h302 unsigned char CTRL; /* 4 bits */ member

12