/linux-2.6.39/drivers/ata/ |
D | sata_vsc.c | 183 writew(tf->lbah | (((u16)tf->hob_lbah) << 8), in vsc_sata_tf_load() 190 writew(tf->lbah, ioaddr->lbah_addr); in vsc_sata_tf_load() 203 u16 nsect, lbal, lbam, lbah, feature; in vsc_sata_tf_read() local 211 lbah = readw(ioaddr->lbah_addr); in vsc_sata_tf_read() 217 tf->lbah = lbah; in vsc_sata_tf_read() 224 tf->hob_lbah = lbah >> 8; in vsc_sata_tf_read()
|
D | sata_svw.c | 165 writew(tf->lbah | (((u16)tf->hob_lbah) << 8), in k2_sata_tf_load() 172 writew(tf->lbah, ioaddr->lbah_addr); in k2_sata_tf_load() 185 u16 nsect, lbal, lbam, lbah, feature; in k2_sata_tf_read() local 193 lbah = readw(ioaddr->lbah_addr); in k2_sata_tf_read() 199 tf->lbah = lbah; in k2_sata_tf_read() 206 tf->hob_lbah = lbah >> 8; in k2_sata_tf_read()
|
D | sata_promise.h | 123 buf[i++] = tf->lbah; in pdc_prep_lba28() 151 buf[i++] = tf->lbah; in pdc_prep_lba48()
|
D | sata_inic162x.c | 199 u8 lbah; /* ATA Cylinder High */ member 496 cpb->lbah = qc->tf.lbah; in inic_qc_prep() 549 tf->lbah = readb(port_base + PORT_TF_LBAH); in inic_tf_read()
|
D | libata-scsi.c | 980 desc[11] = tf->lbah; in ata_gen_passthru_sense() 1311 tf->lbah = 0x0; in ata_scsi_start_stop_xlat() 1319 tf->lbah = 0x0; /* cyl high */ in ata_scsi_start_stop_xlat() 1549 tf->lbah = (block >> 16) & 0xff; in ata_scsi_verify_xlat() 1581 tf->lbah = cyl >> 8; in ata_scsi_verify_xlat() 2533 qc->tf.lbah = 0; in atapi_request_sense() 2700 qc->tf.lbah = (nbytes >> 8); in atapi_xlat() 2865 tf->lbah = cdb[12]; in ata_scsi_pass_thru() 2878 tf->lbah = cdb[7]; in ata_scsi_pass_thru()
|
D | libata-core.c | 557 fis[6] = tf->lbah; in ata_tf_to_fis() 594 tf->lbah = fis[6]; in ata_tf_from_fis() 703 block |= tf->lbah << 16; in ata_tf_read_block() 709 cyl = tf->lbam | (tf->lbah << 8); in ata_tf_read_block() 772 tf->lbah = (block >> 16) & 0xff; in ata_build_rw_tf() 806 tf->lbah = (block >> 16) & 0xff; in ata_build_rw_tf() 841 tf->lbah = cyl >> 8; in ata_build_rw_tf() 1069 if ((tf->lbam == 0) && (tf->lbah == 0)) { in ata_dev_classify() 1074 if ((tf->lbam == 0x14) && (tf->lbah == 0xeb)) { in ata_dev_classify() 1079 if ((tf->lbam == 0x69) && (tf->lbah == 0x96)) { in ata_dev_classify() [all …]
|
D | pata_octeon_cf.c | 353 tf->lbah = blob >> 8; in octeon_cf_tf_read16() 448 __raw_writew(tf->lbam | tf->lbah << 8, base + 4); in octeon_cf_tf_load16() 454 tf->lbah); in octeon_cf_tf_load16()
|
D | pata_scc.c | 308 out_be32(ioaddr->lbah_addr, tf->lbah); in scc_tf_load() 314 tf->lbah); in scc_tf_load() 354 tf->lbah = in_be32(ioaddr->lbah_addr); in scc_tf_read()
|
D | pata_via.c | 412 iowrite8(tf->lbah, ioaddr->lbah_addr); in via_tf_load() 418 tf->lbah); in via_tf_load()
|
D | pata_ns87415.c | 273 tf->lbah = ioread8(ioaddr->lbah_addr); in ns87560_tf_read()
|
D | libata-acpi.c | 596 tf->lbah = gtf->tf[4]; /* 0x1f5 */ in ata_acpi_gtf_to_tf() 741 tf.lbam, tf.lbah, tf.device, in ata_acpi_run_tf()
|
D | pata_samsung_cf.c | 180 ata_outb(ap->host, tf->lbah, ioaddr->lbah_addr); in pata_s3c_tf_load() 200 tf->lbah = ata_inb(ap->host, ioaddr->lbah_addr); in pata_s3c_tf_read()
|
D | libata-pmp.c | 57 *r_val = tf.nsect | tf.lbal << 8 | tf.lbam << 16 | tf.lbah << 24; in sata_pmp_read() 90 tf.lbah = (val >> 24) & 0xff; in sata_pmp_write()
|
/linux-2.6.39/drivers/ide/ |
D | ide-lib.c | 39 low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; in ide_get_lba_addr() 42 high = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; in ide_get_lba_addr() 70 printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam, in ide_dump_sector()
|
D | ide-disk.c | 111 tf->lbah = (u8)(block >> 16); in __ide_do_rw_disk() 119 tf->lbah = (u8)((u64)block >> 40); in __ide_do_rw_disk() 129 tf->lbah = block >>= 8; in __ide_do_rw_disk() 145 tf->lbah = cyl >> 8; in __ide_do_rw_disk() 251 tf->lbah = (addr_req >>= 8) & 0xff; in idedisk_set_max_address() 255 cmd.hob.lbah = (addr_req >>= 8) & 0xff; in idedisk_set_max_address()
|
D | ide-disk_proc.c | 16 tf->lbah = ATA_SMART_LBAH_PASS; in smart_enable() 33 tf->lbah = ATA_SMART_LBAH_PASS; in get_smart_data()
|
D | ide-io-std.c | 109 tf_outb(tf->lbah, io_ports->lbah_addr); in ide_tf_load() 136 tf->lbah = tf_inb(io_ports->lbah_addr); in ide_tf_read()
|
D | ide-park.c | 74 tf->lbah = 0x55; in ide_do_park_unpark()
|
D | ns87415.c | 78 tf->lbah = inb(io_ports->lbah_addr); in superio_tf_read()
|
D | ide-atapi.c | 329 *bcount = (tf.lbah << 8) | tf.lbam; in ide_read_bcount_and_ireason() 538 cmd->tf.lbah = (bcount >> 8) & 0xff; in ide_init_packet_cmd()
|
D | ide-taskfile.c | 49 cmd->tf.lbal, cmd->tf.lbam, cmd->tf.lbah, in ide_tf_dump() 52 s, cmd->hob.nsect, cmd->hob.lbal, cmd->hob.lbam, cmd->hob.lbah); in ide_tf_dump()
|
D | scc_pata.c | 660 scc_ide_outb(tf->lbah, io_ports->lbah_addr); in scc_tf_load() 678 tf->lbah = scc_ide_inb(io_ports->lbah_addr); in scc_tf_read()
|
D | ide-ioctls.c | 144 tf->lbah = 0xc2; in ide_cmd_ioctl()
|
/linux-2.6.39/include/scsi/ |
D | sas.h | 206 union { u8 lbah; u8 byte_count_high; }; member 230 union { u8 lbah; u8 byte_count_high; }; member
|
/linux-2.6.39/drivers/scsi/libsas/ |
D | sas_ata.c | 550 fis->lbah == 0 && in sas_get_ata_command_set() 556 fis->lbah == 0xAA && in sas_get_ata_command_set() 572 fis->lbah == 0xC3 && in sas_get_ata_command_set()
|