1 /*
2 * ov2640 Camera Driver
3 *
4 * Copyright (C) 2010 Alberto Panizzo <maramaopercheseimorto@gmail.com>
5 *
6 * Based on ov772x, ov9640 drivers and previous non merged implementations.
7 *
8 * Copyright 2005-2009 Freescale Semiconductor, Inc. All Rights Reserved.
9 * Copyright (C) 2006, OmniVision
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16 #include <linux/init.h>
17 #include <linux/module.h>
18 #include <linux/i2c.h>
19 #include <linux/slab.h>
20 #include <linux/delay.h>
21 #include <linux/videodev2.h>
22 #include <media/v4l2-chip-ident.h>
23 #include <media/v4l2-subdev.h>
24 #include <media/soc_camera.h>
25 #include <media/soc_mediabus.h>
26
27 #define VAL_SET(x, mask, rshift, lshift) \
28 ((((x) >> rshift) & mask) << lshift)
29 /*
30 * DSP registers
31 * register offset for BANK_SEL == BANK_SEL_DSP
32 */
33 #define R_BYPASS 0x05 /* Bypass DSP */
34 #define R_BYPASS_DSP_BYPAS 0x01 /* Bypass DSP, sensor out directly */
35 #define R_BYPASS_USE_DSP 0x00 /* Use the internal DSP */
36 #define QS 0x44 /* Quantization Scale Factor */
37 #define CTRLI 0x50
38 #define CTRLI_LP_DP 0x80
39 #define CTRLI_ROUND 0x40
40 #define CTRLI_V_DIV_SET(x) VAL_SET(x, 0x3, 0, 3)
41 #define CTRLI_H_DIV_SET(x) VAL_SET(x, 0x3, 0, 0)
42 #define HSIZE 0x51 /* H_SIZE[7:0] (real/4) */
43 #define HSIZE_SET(x) VAL_SET(x, 0xFF, 2, 0)
44 #define VSIZE 0x52 /* V_SIZE[7:0] (real/4) */
45 #define VSIZE_SET(x) VAL_SET(x, 0xFF, 2, 0)
46 #define XOFFL 0x53 /* OFFSET_X[7:0] */
47 #define XOFFL_SET(x) VAL_SET(x, 0xFF, 0, 0)
48 #define YOFFL 0x54 /* OFFSET_Y[7:0] */
49 #define YOFFL_SET(x) VAL_SET(x, 0xFF, 0, 0)
50 #define VHYX 0x55 /* Offset and size completion */
51 #define VHYX_VSIZE_SET(x) VAL_SET(x, 0x1, (8+2), 7)
52 #define VHYX_HSIZE_SET(x) VAL_SET(x, 0x1, (8+2), 3)
53 #define VHYX_YOFF_SET(x) VAL_SET(x, 0x3, 8, 4)
54 #define VHYX_XOFF_SET(x) VAL_SET(x, 0x3, 8, 0)
55 #define DPRP 0x56
56 #define TEST 0x57 /* Horizontal size completion */
57 #define TEST_HSIZE_SET(x) VAL_SET(x, 0x1, (9+2), 7)
58 #define ZMOW 0x5A /* Zoom: Out Width OUTW[7:0] (real/4) */
59 #define ZMOW_OUTW_SET(x) VAL_SET(x, 0xFF, 2, 0)
60 #define ZMOH 0x5B /* Zoom: Out Height OUTH[7:0] (real/4) */
61 #define ZMOH_OUTH_SET(x) VAL_SET(x, 0xFF, 2, 0)
62 #define ZMHH 0x5C /* Zoom: Speed and H&W completion */
63 #define ZMHH_ZSPEED_SET(x) VAL_SET(x, 0x0F, 0, 4)
64 #define ZMHH_OUTH_SET(x) VAL_SET(x, 0x1, (8+2), 2)
65 #define ZMHH_OUTW_SET(x) VAL_SET(x, 0x3, (8+2), 0)
66 #define BPADDR 0x7C /* SDE Indirect Register Access: Address */
67 #define BPDATA 0x7D /* SDE Indirect Register Access: Data */
68 #define CTRL2 0x86 /* DSP Module enable 2 */
69 #define CTRL2_DCW_EN 0x20
70 #define CTRL2_SDE_EN 0x10
71 #define CTRL2_UV_ADJ_EN 0x08
72 #define CTRL2_UV_AVG_EN 0x04
73 #define CTRL2_CMX_EN 0x01
74 #define CTRL3 0x87 /* DSP Module enable 3 */
75 #define CTRL3_BPC_EN 0x80
76 #define CTRL3_WPC_EN 0x40
77 #define SIZEL 0x8C /* Image Size Completion */
78 #define SIZEL_HSIZE8_11_SET(x) VAL_SET(x, 0x1, 11, 6)
79 #define SIZEL_HSIZE8_SET(x) VAL_SET(x, 0x7, 0, 3)
80 #define SIZEL_VSIZE8_SET(x) VAL_SET(x, 0x7, 0, 0)
81 #define HSIZE8 0xC0 /* Image Horizontal Size HSIZE[10:3] */
82 #define HSIZE8_SET(x) VAL_SET(x, 0xFF, 3, 0)
83 #define VSIZE8 0xC1 /* Image Vertical Size VSIZE[10:3] */
84 #define VSIZE8_SET(x) VAL_SET(x, 0xFF, 3, 0)
85 #define CTRL0 0xC2 /* DSP Module enable 0 */
86 #define CTRL0_AEC_EN 0x80
87 #define CTRL0_AEC_SEL 0x40
88 #define CTRL0_STAT_SEL 0x20
89 #define CTRL0_VFIRST 0x10
90 #define CTRL0_YUV422 0x08
91 #define CTRL0_YUV_EN 0x04
92 #define CTRL0_RGB_EN 0x02
93 #define CTRL0_RAW_EN 0x01
94 #define CTRL1 0xC3 /* DSP Module enable 1 */
95 #define CTRL1_CIP 0x80
96 #define CTRL1_DMY 0x40
97 #define CTRL1_RAW_GMA 0x20
98 #define CTRL1_DG 0x10
99 #define CTRL1_AWB 0x08
100 #define CTRL1_AWB_GAIN 0x04
101 #define CTRL1_LENC 0x02
102 #define CTRL1_PRE 0x01
103 #define R_DVP_SP 0xD3 /* DVP output speed control */
104 #define R_DVP_SP_AUTO_MODE 0x80
105 #define R_DVP_SP_DVP_MASK 0x3F /* DVP PCLK = sysclk (48)/[6:0] (YUV0);
106 * = sysclk (48)/(2*[6:0]) (RAW);*/
107 #define IMAGE_MODE 0xDA /* Image Output Format Select */
108 #define IMAGE_MODE_Y8_DVP_EN 0x40
109 #define IMAGE_MODE_JPEG_EN 0x10
110 #define IMAGE_MODE_YUV422 0x00
111 #define IMAGE_MODE_RAW10 0x04 /* (DVP) */
112 #define IMAGE_MODE_RGB565 0x08
113 #define IMAGE_MODE_HREF_VSYNC 0x02 /* HREF timing select in DVP JPEG output
114 * mode (0 for HREF is same as sensor) */
115 #define IMAGE_MODE_LBYTE_FIRST 0x01 /* Byte swap enable for DVP
116 * 1: Low byte first UYVY (C2[4] =0)
117 * VYUY (C2[4] =1)
118 * 0: High byte first YUYV (C2[4]=0)
119 * YVYU (C2[4] = 1) */
120 #define RESET 0xE0 /* Reset */
121 #define RESET_MICROC 0x40
122 #define RESET_SCCB 0x20
123 #define RESET_JPEG 0x10
124 #define RESET_DVP 0x04
125 #define RESET_IPU 0x02
126 #define RESET_CIF 0x01
127 #define REGED 0xED /* Register ED */
128 #define REGED_CLK_OUT_DIS 0x10
129 #define MS_SP 0xF0 /* SCCB Master Speed */
130 #define SS_ID 0xF7 /* SCCB Slave ID */
131 #define SS_CTRL 0xF8 /* SCCB Slave Control */
132 #define SS_CTRL_ADD_AUTO_INC 0x20
133 #define SS_CTRL_EN 0x08
134 #define SS_CTRL_DELAY_CLK 0x04
135 #define SS_CTRL_ACC_EN 0x02
136 #define SS_CTRL_SEN_PASS_THR 0x01
137 #define MC_BIST 0xF9 /* Microcontroller misc register */
138 #define MC_BIST_RESET 0x80 /* Microcontroller Reset */
139 #define MC_BIST_BOOT_ROM_SEL 0x40
140 #define MC_BIST_12KB_SEL 0x20
141 #define MC_BIST_12KB_MASK 0x30
142 #define MC_BIST_512KB_SEL 0x08
143 #define MC_BIST_512KB_MASK 0x0C
144 #define MC_BIST_BUSY_BIT_R 0x02
145 #define MC_BIST_MC_RES_ONE_SH_W 0x02
146 #define MC_BIST_LAUNCH 0x01
147 #define BANK_SEL 0xFF /* Register Bank Select */
148 #define BANK_SEL_DSP 0x00
149 #define BANK_SEL_SENS 0x01
150
151 /*
152 * Sensor registers
153 * register offset for BANK_SEL == BANK_SEL_SENS
154 */
155 #define GAIN 0x00 /* AGC - Gain control gain setting */
156 #define COM1 0x03 /* Common control 1 */
157 #define COM1_1_DUMMY_FR 0x40
158 #define COM1_3_DUMMY_FR 0x80
159 #define COM1_7_DUMMY_FR 0xC0
160 #define COM1_VWIN_LSB_UXGA 0x0F
161 #define COM1_VWIN_LSB_SVGA 0x0A
162 #define COM1_VWIN_LSB_CIF 0x06
163 #define REG04 0x04 /* Register 04 */
164 #define REG04_DEF 0x20 /* Always set */
165 #define REG04_HFLIP_IMG 0x80 /* Horizontal mirror image ON/OFF */
166 #define REG04_VFLIP_IMG 0x40 /* Vertical flip image ON/OFF */
167 #define REG04_VREF_EN 0x10
168 #define REG04_HREF_EN 0x08
169 #define REG04_AEC_SET(x) VAL_SET(x, 0x3, 0, 0)
170 #define REG08 0x08 /* Frame Exposure One-pin Control Pre-charge Row Num */
171 #define COM2 0x09 /* Common control 2 */
172 #define COM2_SOFT_SLEEP_MODE 0x10 /* Soft sleep mode */
173 /* Output drive capability */
174 #define COM2_OCAP_Nx_SET(N) (((N) - 1) & 0x03) /* N = [1x .. 4x] */
175 #define PID 0x0A /* Product ID Number MSB */
176 #define VER 0x0B /* Product ID Number LSB */
177 #define COM3 0x0C /* Common control 3 */
178 #define COM3_BAND_50H 0x04 /* 0 For Banding at 60H */
179 #define COM3_BAND_AUTO 0x02 /* Auto Banding */
180 #define COM3_SING_FR_SNAPSH 0x01 /* 0 For enable live video output after the
181 * snapshot sequence*/
182 #define AEC 0x10 /* AEC[9:2] Exposure Value */
183 #define CLKRC 0x11 /* Internal clock */
184 #define CLKRC_EN 0x80
185 #define CLKRC_DIV_SET(x) (((x) - 1) & 0x1F) /* CLK = XVCLK/(x) */
186 #define COM7 0x12 /* Common control 7 */
187 #define COM7_SRST 0x80 /* Initiates system reset. All registers are
188 * set to factory default values after which
189 * the chip resumes normal operation */
190 #define COM7_RES_UXGA 0x00 /* Resolution selectors for UXGA */
191 #define COM7_RES_SVGA 0x40 /* SVGA */
192 #define COM7_RES_CIF 0x20 /* CIF */
193 #define COM7_ZOOM_EN 0x04 /* Enable Zoom mode */
194 #define COM7_COLOR_BAR_TEST 0x02 /* Enable Color Bar Test Pattern */
195 #define COM8 0x13 /* Common control 8 */
196 #define COM8_DEF 0xC0 /* Banding filter ON/OFF */
197 #define COM8_BNDF_EN 0x20 /* Banding filter ON/OFF */
198 #define COM8_AGC_EN 0x04 /* AGC Auto/Manual control selection */
199 #define COM8_AEC_EN 0x01 /* Auto/Manual Exposure control */
200 #define COM9 0x14 /* Common control 9
201 * Automatic gain ceiling - maximum AGC value [7:5]*/
202 #define COM9_AGC_GAIN_2x 0x00 /* 000 : 2x */
203 #define COM9_AGC_GAIN_4x 0x20 /* 001 : 4x */
204 #define COM9_AGC_GAIN_8x 0x40 /* 010 : 8x */
205 #define COM9_AGC_GAIN_16x 0x60 /* 011 : 16x */
206 #define COM9_AGC_GAIN_32x 0x80 /* 100 : 32x */
207 #define COM9_AGC_GAIN_64x 0xA0 /* 101 : 64x */
208 #define COM9_AGC_GAIN_128x 0xC0 /* 110 : 128x */
209 #define COM10 0x15 /* Common control 10 */
210 #define COM10_PCLK_HREF 0x20 /* PCLK output qualified by HREF */
211 #define COM10_PCLK_RISE 0x10 /* Data is updated at the rising edge of
212 * PCLK (user can latch data at the next
213 * falling edge of PCLK).
214 * 0 otherwise. */
215 #define COM10_HREF_INV 0x08 /* Invert HREF polarity:
216 * HREF negative for valid data*/
217 #define COM10_VSINC_INV 0x02 /* Invert VSYNC polarity */
218 #define HSTART 0x17 /* Horizontal Window start MSB 8 bit */
219 #define HEND 0x18 /* Horizontal Window end MSB 8 bit */
220 #define VSTART 0x19 /* Vertical Window start MSB 8 bit */
221 #define VEND 0x1A /* Vertical Window end MSB 8 bit */
222 #define MIDH 0x1C /* Manufacturer ID byte - high */
223 #define MIDL 0x1D /* Manufacturer ID byte - low */
224 #define AEW 0x24 /* AGC/AEC - Stable operating region (upper limit) */
225 #define AEB 0x25 /* AGC/AEC - Stable operating region (lower limit) */
226 #define VV 0x26 /* AGC/AEC Fast mode operating region */
227 #define VV_HIGH_TH_SET(x) VAL_SET(x, 0xF, 0, 4)
228 #define VV_LOW_TH_SET(x) VAL_SET(x, 0xF, 0, 0)
229 #define REG2A 0x2A /* Dummy pixel insert MSB */
230 #define FRARL 0x2B /* Dummy pixel insert LSB */
231 #define ADDVFL 0x2D /* LSB of insert dummy lines in Vertical direction */
232 #define ADDVFH 0x2E /* MSB of insert dummy lines in Vertical direction */
233 #define YAVG 0x2F /* Y/G Channel Average value */
234 #define REG32 0x32 /* Common Control 32 */
235 #define REG32_PCLK_DIV_2 0x80 /* PCLK freq divided by 2 */
236 #define REG32_PCLK_DIV_4 0xC0 /* PCLK freq divided by 4 */
237 #define ARCOM2 0x34 /* Zoom: Horizontal start point */
238 #define REG45 0x45 /* Register 45 */
239 #define FLL 0x46 /* Frame Length Adjustment LSBs */
240 #define FLH 0x47 /* Frame Length Adjustment MSBs */
241 #define COM19 0x48 /* Zoom: Vertical start point */
242 #define ZOOMS 0x49 /* Zoom: Vertical start point */
243 #define COM22 0x4B /* Flash light control */
244 #define COM25 0x4E /* For Banding operations */
245 #define BD50 0x4F /* 50Hz Banding AEC 8 LSBs */
246 #define BD60 0x50 /* 60Hz Banding AEC 8 LSBs */
247 #define REG5D 0x5D /* AVGsel[7:0], 16-zone average weight option */
248 #define REG5E 0x5E /* AVGsel[15:8], 16-zone average weight option */
249 #define REG5F 0x5F /* AVGsel[23:16], 16-zone average weight option */
250 #define REG60 0x60 /* AVGsel[31:24], 16-zone average weight option */
251 #define HISTO_LOW 0x61 /* Histogram Algorithm Low Level */
252 #define HISTO_HIGH 0x62 /* Histogram Algorithm High Level */
253
254 /*
255 * ID
256 */
257 #define MANUFACTURER_ID 0x7FA2
258 #define PID_OV2640 0x2642
259 #define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF))
260
261 /*
262 * Struct
263 */
264 struct regval_list {
265 u8 reg_num;
266 u8 value;
267 };
268
269 /* Supported resolutions */
270 enum ov2640_width {
271 W_QCIF = 176,
272 W_QVGA = 320,
273 W_CIF = 352,
274 W_VGA = 640,
275 W_SVGA = 800,
276 W_XGA = 1024,
277 W_SXGA = 1280,
278 W_UXGA = 1600,
279 };
280
281 enum ov2640_height {
282 H_QCIF = 144,
283 H_QVGA = 240,
284 H_CIF = 288,
285 H_VGA = 480,
286 H_SVGA = 600,
287 H_XGA = 768,
288 H_SXGA = 1024,
289 H_UXGA = 1200,
290 };
291
292 struct ov2640_win_size {
293 char *name;
294 enum ov2640_width width;
295 enum ov2640_height height;
296 const struct regval_list *regs;
297 };
298
299
300 struct ov2640_priv {
301 struct v4l2_subdev subdev;
302 struct ov2640_camera_info *info;
303 enum v4l2_mbus_pixelcode cfmt_code;
304 const struct ov2640_win_size *win;
305 int model;
306 u16 flag_vflip:1;
307 u16 flag_hflip:1;
308 };
309
310 /*
311 * Registers settings
312 */
313
314 #define ENDMARKER { 0xff, 0xff }
315
316 static const struct regval_list ov2640_init_regs[] = {
317 { BANK_SEL, BANK_SEL_DSP },
318 { 0x2c, 0xff },
319 { 0x2e, 0xdf },
320 { BANK_SEL, BANK_SEL_SENS },
321 { 0x3c, 0x32 },
322 { CLKRC, CLKRC_DIV_SET(1) },
323 { COM2, COM2_OCAP_Nx_SET(3) },
324 { REG04, REG04_DEF | REG04_HREF_EN },
325 { COM8, COM8_DEF | COM8_BNDF_EN | COM8_AGC_EN | COM8_AEC_EN },
326 { COM9, COM9_AGC_GAIN_8x | 0x08},
327 { 0x2c, 0x0c },
328 { 0x33, 0x78 },
329 { 0x3a, 0x33 },
330 { 0x3b, 0xfb },
331 { 0x3e, 0x00 },
332 { 0x43, 0x11 },
333 { 0x16, 0x10 },
334 { 0x39, 0x02 },
335 { 0x35, 0x88 },
336 { 0x22, 0x0a },
337 { 0x37, 0x40 },
338 { 0x23, 0x00 },
339 { ARCOM2, 0xa0 },
340 { 0x06, 0x02 },
341 { 0x06, 0x88 },
342 { 0x07, 0xc0 },
343 { 0x0d, 0xb7 },
344 { 0x0e, 0x01 },
345 { 0x4c, 0x00 },
346 { 0x4a, 0x81 },
347 { 0x21, 0x99 },
348 { AEW, 0x40 },
349 { AEB, 0x38 },
350 { VV, VV_HIGH_TH_SET(0x08) | VV_LOW_TH_SET(0x02) },
351 { 0x5c, 0x00 },
352 { 0x63, 0x00 },
353 { FLL, 0x22 },
354 { COM3, 0x38 | COM3_BAND_AUTO },
355 { REG5D, 0x55 },
356 { REG5E, 0x7d },
357 { REG5F, 0x7d },
358 { REG60, 0x55 },
359 { HISTO_LOW, 0x70 },
360 { HISTO_HIGH, 0x80 },
361 { 0x7c, 0x05 },
362 { 0x20, 0x80 },
363 { 0x28, 0x30 },
364 { 0x6c, 0x00 },
365 { 0x6d, 0x80 },
366 { 0x6e, 0x00 },
367 { 0x70, 0x02 },
368 { 0x71, 0x94 },
369 { 0x73, 0xc1 },
370 { 0x3d, 0x34 },
371 { COM7, COM7_RES_UXGA | COM7_ZOOM_EN },
372 { 0x5a, 0x57 },
373 { BD50, 0xbb },
374 { BD60, 0x9c },
375 { BANK_SEL, BANK_SEL_DSP },
376 { 0xe5, 0x7f },
377 { MC_BIST, MC_BIST_RESET | MC_BIST_BOOT_ROM_SEL },
378 { 0x41, 0x24 },
379 { RESET, RESET_JPEG | RESET_DVP },
380 { 0x76, 0xff },
381 { 0x33, 0xa0 },
382 { 0x42, 0x20 },
383 { 0x43, 0x18 },
384 { 0x4c, 0x00 },
385 { CTRL3, CTRL3_BPC_EN | CTRL3_WPC_EN | 0x10 },
386 { 0x88, 0x3f },
387 { 0xd7, 0x03 },
388 { 0xd9, 0x10 },
389 { R_DVP_SP , R_DVP_SP_AUTO_MODE | 0x2 },
390 { 0xc8, 0x08 },
391 { 0xc9, 0x80 },
392 { BPADDR, 0x00 },
393 { BPDATA, 0x00 },
394 { BPADDR, 0x03 },
395 { BPDATA, 0x48 },
396 { BPDATA, 0x48 },
397 { BPADDR, 0x08 },
398 { BPDATA, 0x20 },
399 { BPDATA, 0x10 },
400 { BPDATA, 0x0e },
401 { 0x90, 0x00 },
402 { 0x91, 0x0e },
403 { 0x91, 0x1a },
404 { 0x91, 0x31 },
405 { 0x91, 0x5a },
406 { 0x91, 0x69 },
407 { 0x91, 0x75 },
408 { 0x91, 0x7e },
409 { 0x91, 0x88 },
410 { 0x91, 0x8f },
411 { 0x91, 0x96 },
412 { 0x91, 0xa3 },
413 { 0x91, 0xaf },
414 { 0x91, 0xc4 },
415 { 0x91, 0xd7 },
416 { 0x91, 0xe8 },
417 { 0x91, 0x20 },
418 { 0x92, 0x00 },
419 { 0x93, 0x06 },
420 { 0x93, 0xe3 },
421 { 0x93, 0x03 },
422 { 0x93, 0x03 },
423 { 0x93, 0x00 },
424 { 0x93, 0x02 },
425 { 0x93, 0x00 },
426 { 0x93, 0x00 },
427 { 0x93, 0x00 },
428 { 0x93, 0x00 },
429 { 0x93, 0x00 },
430 { 0x93, 0x00 },
431 { 0x93, 0x00 },
432 { 0x96, 0x00 },
433 { 0x97, 0x08 },
434 { 0x97, 0x19 },
435 { 0x97, 0x02 },
436 { 0x97, 0x0c },
437 { 0x97, 0x24 },
438 { 0x97, 0x30 },
439 { 0x97, 0x28 },
440 { 0x97, 0x26 },
441 { 0x97, 0x02 },
442 { 0x97, 0x98 },
443 { 0x97, 0x80 },
444 { 0x97, 0x00 },
445 { 0x97, 0x00 },
446 { 0xa4, 0x00 },
447 { 0xa8, 0x00 },
448 { 0xc5, 0x11 },
449 { 0xc6, 0x51 },
450 { 0xbf, 0x80 },
451 { 0xc7, 0x10 },
452 { 0xb6, 0x66 },
453 { 0xb8, 0xA5 },
454 { 0xb7, 0x64 },
455 { 0xb9, 0x7C },
456 { 0xb3, 0xaf },
457 { 0xb4, 0x97 },
458 { 0xb5, 0xFF },
459 { 0xb0, 0xC5 },
460 { 0xb1, 0x94 },
461 { 0xb2, 0x0f },
462 { 0xc4, 0x5c },
463 { 0xa6, 0x00 },
464 { 0xa7, 0x20 },
465 { 0xa7, 0xd8 },
466 { 0xa7, 0x1b },
467 { 0xa7, 0x31 },
468 { 0xa7, 0x00 },
469 { 0xa7, 0x18 },
470 { 0xa7, 0x20 },
471 { 0xa7, 0xd8 },
472 { 0xa7, 0x19 },
473 { 0xa7, 0x31 },
474 { 0xa7, 0x00 },
475 { 0xa7, 0x18 },
476 { 0xa7, 0x20 },
477 { 0xa7, 0xd8 },
478 { 0xa7, 0x19 },
479 { 0xa7, 0x31 },
480 { 0xa7, 0x00 },
481 { 0xa7, 0x18 },
482 { 0x7f, 0x00 },
483 { 0xe5, 0x1f },
484 { 0xe1, 0x77 },
485 { 0xdd, 0x7f },
486 { CTRL0, CTRL0_YUV422 | CTRL0_YUV_EN | CTRL0_RGB_EN },
487 ENDMARKER,
488 };
489
490 /*
491 * Register settings for window size
492 * The preamble, setup the internal DSP to input an UXGA (1600x1200) image.
493 * Then the different zooming configurations will setup the output image size.
494 */
495 static const struct regval_list ov2640_size_change_preamble_regs[] = {
496 { BANK_SEL, BANK_SEL_DSP },
497 { RESET, RESET_DVP },
498 { HSIZE8, HSIZE8_SET(W_UXGA) },
499 { VSIZE8, VSIZE8_SET(H_UXGA) },
500 { CTRL2, CTRL2_DCW_EN | CTRL2_SDE_EN |
501 CTRL2_UV_AVG_EN | CTRL2_CMX_EN | CTRL2_UV_ADJ_EN },
502 { HSIZE, HSIZE_SET(W_UXGA) },
503 { VSIZE, VSIZE_SET(H_UXGA) },
504 { XOFFL, XOFFL_SET(0) },
505 { YOFFL, YOFFL_SET(0) },
506 { VHYX, VHYX_HSIZE_SET(W_UXGA) | VHYX_VSIZE_SET(H_UXGA) |
507 VHYX_XOFF_SET(0) | VHYX_YOFF_SET(0)},
508 { TEST, TEST_HSIZE_SET(W_UXGA) },
509 ENDMARKER,
510 };
511
512 #define PER_SIZE_REG_SEQ(x, y, v_div, h_div, pclk_div) \
513 { CTRLI, CTRLI_LP_DP | CTRLI_V_DIV_SET(v_div) | \
514 CTRLI_H_DIV_SET(h_div)}, \
515 { ZMOW, ZMOW_OUTW_SET(x) }, \
516 { ZMOH, ZMOH_OUTH_SET(y) }, \
517 { ZMHH, ZMHH_OUTW_SET(x) | ZMHH_OUTH_SET(y) }, \
518 { R_DVP_SP, pclk_div }, \
519 { RESET, 0x00}
520
521 static const struct regval_list ov2640_qcif_regs[] = {
522 PER_SIZE_REG_SEQ(W_QCIF, H_QCIF, 3, 3, 4),
523 ENDMARKER,
524 };
525
526 static const struct regval_list ov2640_qvga_regs[] = {
527 PER_SIZE_REG_SEQ(W_QVGA, H_QVGA, 2, 2, 4),
528 ENDMARKER,
529 };
530
531 static const struct regval_list ov2640_cif_regs[] = {
532 PER_SIZE_REG_SEQ(W_CIF, H_CIF, 2, 2, 8),
533 ENDMARKER,
534 };
535
536 static const struct regval_list ov2640_vga_regs[] = {
537 PER_SIZE_REG_SEQ(W_VGA, H_VGA, 0, 0, 2),
538 ENDMARKER,
539 };
540
541 static const struct regval_list ov2640_svga_regs[] = {
542 PER_SIZE_REG_SEQ(W_SVGA, H_SVGA, 1, 1, 2),
543 ENDMARKER,
544 };
545
546 static const struct regval_list ov2640_xga_regs[] = {
547 PER_SIZE_REG_SEQ(W_XGA, H_XGA, 0, 0, 2),
548 { CTRLI, 0x00},
549 ENDMARKER,
550 };
551
552 static const struct regval_list ov2640_sxga_regs[] = {
553 PER_SIZE_REG_SEQ(W_SXGA, H_SXGA, 0, 0, 2),
554 { CTRLI, 0x00},
555 { R_DVP_SP, 2 | R_DVP_SP_AUTO_MODE },
556 ENDMARKER,
557 };
558
559 static const struct regval_list ov2640_uxga_regs[] = {
560 PER_SIZE_REG_SEQ(W_UXGA, H_UXGA, 0, 0, 0),
561 { CTRLI, 0x00},
562 { R_DVP_SP, 0 | R_DVP_SP_AUTO_MODE },
563 ENDMARKER,
564 };
565
566 #define OV2640_SIZE(n, w, h, r) \
567 {.name = n, .width = w , .height = h, .regs = r }
568
569 static const struct ov2640_win_size ov2640_supported_win_sizes[] = {
570 OV2640_SIZE("QCIF", W_QCIF, H_QCIF, ov2640_qcif_regs),
571 OV2640_SIZE("QVGA", W_QVGA, H_QVGA, ov2640_qvga_regs),
572 OV2640_SIZE("CIF", W_CIF, H_CIF, ov2640_cif_regs),
573 OV2640_SIZE("VGA", W_VGA, H_VGA, ov2640_vga_regs),
574 OV2640_SIZE("SVGA", W_SVGA, H_SVGA, ov2640_svga_regs),
575 OV2640_SIZE("XGA", W_XGA, H_XGA, ov2640_xga_regs),
576 OV2640_SIZE("SXGA", W_SXGA, H_SXGA, ov2640_sxga_regs),
577 OV2640_SIZE("UXGA", W_UXGA, H_UXGA, ov2640_uxga_regs),
578 };
579
580 /*
581 * Register settings for pixel formats
582 */
583 static const struct regval_list ov2640_format_change_preamble_regs[] = {
584 { BANK_SEL, BANK_SEL_DSP },
585 { R_BYPASS, R_BYPASS_USE_DSP },
586 ENDMARKER,
587 };
588
589 static const struct regval_list ov2640_yuv422_regs[] = {
590 { IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_YUV422 },
591 { 0xD7, 0x01 },
592 { 0x33, 0xa0 },
593 { 0xe1, 0x67 },
594 { RESET, 0x00 },
595 { R_BYPASS, R_BYPASS_USE_DSP },
596 ENDMARKER,
597 };
598
599 static const struct regval_list ov2640_rgb565_regs[] = {
600 { IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_RGB565 },
601 { 0xd7, 0x03 },
602 { RESET, 0x00 },
603 { R_BYPASS, R_BYPASS_USE_DSP },
604 ENDMARKER,
605 };
606
607 static enum v4l2_mbus_pixelcode ov2640_codes[] = {
608 V4L2_MBUS_FMT_UYVY8_2X8,
609 V4L2_MBUS_FMT_RGB565_2X8_LE,
610 };
611
612 /*
613 * Supported controls
614 */
615 static const struct v4l2_queryctrl ov2640_controls[] = {
616 {
617 .id = V4L2_CID_VFLIP,
618 .type = V4L2_CTRL_TYPE_BOOLEAN,
619 .name = "Flip Vertically",
620 .minimum = 0,
621 .maximum = 1,
622 .step = 1,
623 .default_value = 0,
624 }, {
625 .id = V4L2_CID_HFLIP,
626 .type = V4L2_CTRL_TYPE_BOOLEAN,
627 .name = "Flip Horizontally",
628 .minimum = 0,
629 .maximum = 1,
630 .step = 1,
631 .default_value = 0,
632 },
633 };
634
635 /*
636 * General functions
637 */
to_ov2640(const struct i2c_client * client)638 static struct ov2640_priv *to_ov2640(const struct i2c_client *client)
639 {
640 return container_of(i2c_get_clientdata(client), struct ov2640_priv,
641 subdev);
642 }
643
ov2640_write_array(struct i2c_client * client,const struct regval_list * vals)644 static int ov2640_write_array(struct i2c_client *client,
645 const struct regval_list *vals)
646 {
647 int ret;
648
649 while ((vals->reg_num != 0xff) || (vals->value != 0xff)) {
650 ret = i2c_smbus_write_byte_data(client,
651 vals->reg_num, vals->value);
652 dev_vdbg(&client->dev, "array: 0x%02x, 0x%02x",
653 vals->reg_num, vals->value);
654
655 if (ret < 0)
656 return ret;
657 vals++;
658 }
659 return 0;
660 }
661
ov2640_mask_set(struct i2c_client * client,u8 reg,u8 mask,u8 set)662 static int ov2640_mask_set(struct i2c_client *client,
663 u8 reg, u8 mask, u8 set)
664 {
665 s32 val = i2c_smbus_read_byte_data(client, reg);
666 if (val < 0)
667 return val;
668
669 val &= ~mask;
670 val |= set & mask;
671
672 dev_vdbg(&client->dev, "masks: 0x%02x, 0x%02x", reg, val);
673
674 return i2c_smbus_write_byte_data(client, reg, val);
675 }
676
ov2640_reset(struct i2c_client * client)677 static int ov2640_reset(struct i2c_client *client)
678 {
679 int ret;
680 const struct regval_list reset_seq[] = {
681 {BANK_SEL, BANK_SEL_SENS},
682 {COM7, COM7_SRST},
683 ENDMARKER,
684 };
685
686 ret = ov2640_write_array(client, reset_seq);
687 if (ret)
688 goto err;
689
690 msleep(5);
691 err:
692 dev_dbg(&client->dev, "%s: (ret %d)", __func__, ret);
693 return ret;
694 }
695
696 /*
697 * soc_camera_ops functions
698 */
ov2640_s_stream(struct v4l2_subdev * sd,int enable)699 static int ov2640_s_stream(struct v4l2_subdev *sd, int enable)
700 {
701 return 0;
702 }
703
ov2640_set_bus_param(struct soc_camera_device * icd,unsigned long flags)704 static int ov2640_set_bus_param(struct soc_camera_device *icd,
705 unsigned long flags)
706 {
707 struct soc_camera_link *icl = to_soc_camera_link(icd);
708 unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
709
710 /* Only one width bit may be set */
711 if (!is_power_of_2(width_flag))
712 return -EINVAL;
713
714 if (icl->set_bus_param)
715 return icl->set_bus_param(icl, width_flag);
716
717 /*
718 * Without board specific bus width settings we support only the
719 * sensors native bus width witch are tested working
720 */
721 if (width_flag & (SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8))
722 return 0;
723
724 return 0;
725 }
726
ov2640_query_bus_param(struct soc_camera_device * icd)727 static unsigned long ov2640_query_bus_param(struct soc_camera_device *icd)
728 {
729 struct soc_camera_link *icl = to_soc_camera_link(icd);
730 unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
731 SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
732 SOCAM_DATA_ACTIVE_HIGH;
733
734 if (icl->query_bus_param)
735 flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
736 else
737 flags |= SOCAM_DATAWIDTH_10;
738
739 return soc_camera_apply_sensor_flags(icl, flags);
740 }
741
ov2640_g_ctrl(struct v4l2_subdev * sd,struct v4l2_control * ctrl)742 static int ov2640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
743 {
744 struct i2c_client *client = v4l2_get_subdevdata(sd);
745 struct ov2640_priv *priv = to_ov2640(client);
746
747 switch (ctrl->id) {
748 case V4L2_CID_VFLIP:
749 ctrl->value = priv->flag_vflip;
750 break;
751 case V4L2_CID_HFLIP:
752 ctrl->value = priv->flag_hflip;
753 break;
754 }
755 return 0;
756 }
757
ov2640_s_ctrl(struct v4l2_subdev * sd,struct v4l2_control * ctrl)758 static int ov2640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
759 {
760 struct i2c_client *client = v4l2_get_subdevdata(sd);
761 struct ov2640_priv *priv = to_ov2640(client);
762 int ret = 0;
763 u8 val;
764
765 switch (ctrl->id) {
766 case V4L2_CID_VFLIP:
767 val = ctrl->value ? REG04_VFLIP_IMG : 0x00;
768 priv->flag_vflip = ctrl->value ? 1 : 0;
769 ret = ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val);
770 break;
771 case V4L2_CID_HFLIP:
772 val = ctrl->value ? REG04_HFLIP_IMG : 0x00;
773 priv->flag_hflip = ctrl->value ? 1 : 0;
774 ret = ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val);
775 break;
776 }
777
778 return ret;
779 }
780
ov2640_g_chip_ident(struct v4l2_subdev * sd,struct v4l2_dbg_chip_ident * id)781 static int ov2640_g_chip_ident(struct v4l2_subdev *sd,
782 struct v4l2_dbg_chip_ident *id)
783 {
784 struct i2c_client *client = v4l2_get_subdevdata(sd);
785 struct ov2640_priv *priv = to_ov2640(client);
786
787 id->ident = priv->model;
788 id->revision = 0;
789
790 return 0;
791 }
792
793 #ifdef CONFIG_VIDEO_ADV_DEBUG
ov2640_g_register(struct v4l2_subdev * sd,struct v4l2_dbg_register * reg)794 static int ov2640_g_register(struct v4l2_subdev *sd,
795 struct v4l2_dbg_register *reg)
796 {
797 struct i2c_client *client = v4l2_get_subdevdata(sd);
798 int ret;
799
800 reg->size = 1;
801 if (reg->reg > 0xff)
802 return -EINVAL;
803
804 ret = i2c_smbus_read_byte_data(client, reg->reg);
805 if (ret < 0)
806 return ret;
807
808 reg->val = ret;
809
810 return 0;
811 }
812
ov2640_s_register(struct v4l2_subdev * sd,struct v4l2_dbg_register * reg)813 static int ov2640_s_register(struct v4l2_subdev *sd,
814 struct v4l2_dbg_register *reg)
815 {
816 struct i2c_client *client = v4l2_get_subdevdata(sd);
817
818 if (reg->reg > 0xff ||
819 reg->val > 0xff)
820 return -EINVAL;
821
822 return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
823 }
824 #endif
825
826 /* Select the nearest higher resolution for capture */
ov2640_select_win(u32 * width,u32 * height)827 static const struct ov2640_win_size *ov2640_select_win(u32 *width, u32 *height)
828 {
829 int i, default_size = ARRAY_SIZE(ov2640_supported_win_sizes) - 1;
830
831 for (i = 0; i < ARRAY_SIZE(ov2640_supported_win_sizes); i++) {
832 if (ov2640_supported_win_sizes[i].width >= *width &&
833 ov2640_supported_win_sizes[i].height >= *height) {
834 *width = ov2640_supported_win_sizes[i].width;
835 *height = ov2640_supported_win_sizes[i].height;
836 return &ov2640_supported_win_sizes[i];
837 }
838 }
839
840 *width = ov2640_supported_win_sizes[default_size].width;
841 *height = ov2640_supported_win_sizes[default_size].height;
842 return &ov2640_supported_win_sizes[default_size];
843 }
844
ov2640_set_params(struct i2c_client * client,u32 * width,u32 * height,enum v4l2_mbus_pixelcode code)845 static int ov2640_set_params(struct i2c_client *client, u32 *width, u32 *height,
846 enum v4l2_mbus_pixelcode code)
847 {
848 struct ov2640_priv *priv = to_ov2640(client);
849 const struct regval_list *selected_cfmt_regs;
850 int ret;
851
852 /* select win */
853 priv->win = ov2640_select_win(width, height);
854
855 /* select format */
856 priv->cfmt_code = 0;
857 switch (code) {
858 case V4L2_MBUS_FMT_RGB565_2X8_LE:
859 dev_dbg(&client->dev, "%s: Selected cfmt RGB565", __func__);
860 selected_cfmt_regs = ov2640_rgb565_regs;
861 break;
862 default:
863 case V4L2_MBUS_FMT_UYVY8_2X8:
864 dev_dbg(&client->dev, "%s: Selected cfmt YUV422", __func__);
865 selected_cfmt_regs = ov2640_yuv422_regs;
866 }
867
868 /* reset hardware */
869 ov2640_reset(client);
870
871 /* initialize the sensor with default data */
872 dev_dbg(&client->dev, "%s: Init default", __func__);
873 ret = ov2640_write_array(client, ov2640_init_regs);
874 if (ret < 0)
875 goto err;
876
877 /* select preamble */
878 dev_dbg(&client->dev, "%s: Set size to %s", __func__, priv->win->name);
879 ret = ov2640_write_array(client, ov2640_size_change_preamble_regs);
880 if (ret < 0)
881 goto err;
882
883 /* set size win */
884 ret = ov2640_write_array(client, priv->win->regs);
885 if (ret < 0)
886 goto err;
887
888 /* cfmt preamble */
889 dev_dbg(&client->dev, "%s: Set cfmt", __func__);
890 ret = ov2640_write_array(client, ov2640_format_change_preamble_regs);
891 if (ret < 0)
892 goto err;
893
894 /* set cfmt */
895 ret = ov2640_write_array(client, selected_cfmt_regs);
896 if (ret < 0)
897 goto err;
898
899 priv->cfmt_code = code;
900 *width = priv->win->width;
901 *height = priv->win->height;
902
903 return 0;
904
905 err:
906 dev_err(&client->dev, "%s: Error %d", __func__, ret);
907 ov2640_reset(client);
908 priv->win = NULL;
909
910 return ret;
911 }
912
ov2640_g_fmt(struct v4l2_subdev * sd,struct v4l2_mbus_framefmt * mf)913 static int ov2640_g_fmt(struct v4l2_subdev *sd,
914 struct v4l2_mbus_framefmt *mf)
915 {
916 struct i2c_client *client = v4l2_get_subdevdata(sd);
917 struct ov2640_priv *priv = to_ov2640(client);
918
919 if (!priv->win) {
920 u32 width = W_SVGA, height = H_SVGA;
921 int ret = ov2640_set_params(client, &width, &height,
922 V4L2_MBUS_FMT_UYVY8_2X8);
923 if (ret < 0)
924 return ret;
925 }
926
927 mf->width = priv->win->width;
928 mf->height = priv->win->height;
929 mf->code = priv->cfmt_code;
930
931 switch (mf->code) {
932 case V4L2_MBUS_FMT_RGB565_2X8_LE:
933 mf->colorspace = V4L2_COLORSPACE_SRGB;
934 break;
935 default:
936 case V4L2_MBUS_FMT_UYVY8_2X8:
937 mf->colorspace = V4L2_COLORSPACE_JPEG;
938 }
939 mf->field = V4L2_FIELD_NONE;
940
941 return 0;
942 }
943
ov2640_s_fmt(struct v4l2_subdev * sd,struct v4l2_mbus_framefmt * mf)944 static int ov2640_s_fmt(struct v4l2_subdev *sd,
945 struct v4l2_mbus_framefmt *mf)
946 {
947 struct i2c_client *client = v4l2_get_subdevdata(sd);
948 int ret;
949
950
951 switch (mf->code) {
952 case V4L2_MBUS_FMT_RGB565_2X8_LE:
953 mf->colorspace = V4L2_COLORSPACE_SRGB;
954 break;
955 default:
956 mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
957 case V4L2_MBUS_FMT_UYVY8_2X8:
958 mf->colorspace = V4L2_COLORSPACE_JPEG;
959 }
960
961 ret = ov2640_set_params(client, &mf->width, &mf->height, mf->code);
962
963 return ret;
964 }
965
ov2640_try_fmt(struct v4l2_subdev * sd,struct v4l2_mbus_framefmt * mf)966 static int ov2640_try_fmt(struct v4l2_subdev *sd,
967 struct v4l2_mbus_framefmt *mf)
968 {
969 const struct ov2640_win_size *win;
970
971 /*
972 * select suitable win
973 */
974 win = ov2640_select_win(&mf->width, &mf->height);
975
976 mf->field = V4L2_FIELD_NONE;
977
978 switch (mf->code) {
979 case V4L2_MBUS_FMT_RGB565_2X8_LE:
980 mf->colorspace = V4L2_COLORSPACE_SRGB;
981 break;
982 default:
983 mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
984 case V4L2_MBUS_FMT_UYVY8_2X8:
985 mf->colorspace = V4L2_COLORSPACE_JPEG;
986 }
987
988 return 0;
989 }
990
ov2640_enum_fmt(struct v4l2_subdev * sd,unsigned int index,enum v4l2_mbus_pixelcode * code)991 static int ov2640_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
992 enum v4l2_mbus_pixelcode *code)
993 {
994 if (index >= ARRAY_SIZE(ov2640_codes))
995 return -EINVAL;
996
997 *code = ov2640_codes[index];
998 return 0;
999 }
1000
ov2640_g_crop(struct v4l2_subdev * sd,struct v4l2_crop * a)1001 static int ov2640_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
1002 {
1003 a->c.left = 0;
1004 a->c.top = 0;
1005 a->c.width = W_UXGA;
1006 a->c.height = H_UXGA;
1007 a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1008
1009 return 0;
1010 }
1011
ov2640_cropcap(struct v4l2_subdev * sd,struct v4l2_cropcap * a)1012 static int ov2640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
1013 {
1014 a->bounds.left = 0;
1015 a->bounds.top = 0;
1016 a->bounds.width = W_UXGA;
1017 a->bounds.height = H_UXGA;
1018 a->defrect = a->bounds;
1019 a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1020 a->pixelaspect.numerator = 1;
1021 a->pixelaspect.denominator = 1;
1022
1023 return 0;
1024 }
1025
ov2640_video_probe(struct soc_camera_device * icd,struct i2c_client * client)1026 static int ov2640_video_probe(struct soc_camera_device *icd,
1027 struct i2c_client *client)
1028 {
1029 struct ov2640_priv *priv = to_ov2640(client);
1030 u8 pid, ver, midh, midl;
1031 const char *devname;
1032 int ret;
1033
1034 /*
1035 * we must have a parent by now. And it cannot be a wrong one.
1036 * So this entire test is completely redundant.
1037 */
1038 if (!icd->dev.parent ||
1039 to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
1040 dev_err(&client->dev, "Parent missing or invalid!\n");
1041 ret = -ENODEV;
1042 goto err;
1043 }
1044
1045 /*
1046 * check and show product ID and manufacturer ID
1047 */
1048 i2c_smbus_write_byte_data(client, BANK_SEL, BANK_SEL_SENS);
1049 pid = i2c_smbus_read_byte_data(client, PID);
1050 ver = i2c_smbus_read_byte_data(client, VER);
1051 midh = i2c_smbus_read_byte_data(client, MIDH);
1052 midl = i2c_smbus_read_byte_data(client, MIDL);
1053
1054 switch (VERSION(pid, ver)) {
1055 case PID_OV2640:
1056 devname = "ov2640";
1057 priv->model = V4L2_IDENT_OV2640;
1058 break;
1059 default:
1060 dev_err(&client->dev,
1061 "Product ID error %x:%x\n", pid, ver);
1062 ret = -ENODEV;
1063 goto err;
1064 }
1065
1066 dev_info(&client->dev,
1067 "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
1068 devname, pid, ver, midh, midl);
1069
1070 return 0;
1071
1072 err:
1073 return ret;
1074 }
1075
1076 static struct soc_camera_ops ov2640_ops = {
1077 .set_bus_param = ov2640_set_bus_param,
1078 .query_bus_param = ov2640_query_bus_param,
1079 .controls = ov2640_controls,
1080 .num_controls = ARRAY_SIZE(ov2640_controls),
1081 };
1082
1083 static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = {
1084 .g_ctrl = ov2640_g_ctrl,
1085 .s_ctrl = ov2640_s_ctrl,
1086 .g_chip_ident = ov2640_g_chip_ident,
1087 #ifdef CONFIG_VIDEO_ADV_DEBUG
1088 .g_register = ov2640_g_register,
1089 .s_register = ov2640_s_register,
1090 #endif
1091 };
1092
1093 static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = {
1094 .s_stream = ov2640_s_stream,
1095 .g_mbus_fmt = ov2640_g_fmt,
1096 .s_mbus_fmt = ov2640_s_fmt,
1097 .try_mbus_fmt = ov2640_try_fmt,
1098 .cropcap = ov2640_cropcap,
1099 .g_crop = ov2640_g_crop,
1100 .enum_mbus_fmt = ov2640_enum_fmt,
1101 };
1102
1103 static struct v4l2_subdev_ops ov2640_subdev_ops = {
1104 .core = &ov2640_subdev_core_ops,
1105 .video = &ov2640_subdev_video_ops,
1106 };
1107
1108 /*
1109 * i2c_driver functions
1110 */
ov2640_probe(struct i2c_client * client,const struct i2c_device_id * did)1111 static int ov2640_probe(struct i2c_client *client,
1112 const struct i2c_device_id *did)
1113 {
1114 struct ov2640_priv *priv;
1115 struct soc_camera_device *icd = client->dev.platform_data;
1116 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
1117 struct soc_camera_link *icl;
1118 int ret;
1119
1120 if (!icd) {
1121 dev_err(&adapter->dev, "OV2640: missing soc-camera data!\n");
1122 return -EINVAL;
1123 }
1124
1125 icl = to_soc_camera_link(icd);
1126 if (!icl) {
1127 dev_err(&adapter->dev,
1128 "OV2640: Missing platform_data for driver\n");
1129 return -EINVAL;
1130 }
1131
1132 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1133 dev_err(&adapter->dev,
1134 "OV2640: I2C-Adapter doesn't support SMBUS\n");
1135 return -EIO;
1136 }
1137
1138 priv = kzalloc(sizeof(struct ov2640_priv), GFP_KERNEL);
1139 if (!priv) {
1140 dev_err(&adapter->dev,
1141 "Failed to allocate memory for private data!\n");
1142 return -ENOMEM;
1143 }
1144
1145 priv->info = icl->priv;
1146
1147 v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops);
1148
1149 icd->ops = &ov2640_ops;
1150
1151 ret = ov2640_video_probe(icd, client);
1152 if (ret) {
1153 icd->ops = NULL;
1154 kfree(priv);
1155 } else {
1156 dev_info(&adapter->dev, "OV2640 Probed\n");
1157 }
1158
1159 return ret;
1160 }
1161
ov2640_remove(struct i2c_client * client)1162 static int ov2640_remove(struct i2c_client *client)
1163 {
1164 struct ov2640_priv *priv = to_ov2640(client);
1165 struct soc_camera_device *icd = client->dev.platform_data;
1166
1167 icd->ops = NULL;
1168 kfree(priv);
1169 return 0;
1170 }
1171
1172 static const struct i2c_device_id ov2640_id[] = {
1173 { "ov2640", 0 },
1174 { }
1175 };
1176 MODULE_DEVICE_TABLE(i2c, ov2640_id);
1177
1178 static struct i2c_driver ov2640_i2c_driver = {
1179 .driver = {
1180 .name = "ov2640",
1181 },
1182 .probe = ov2640_probe,
1183 .remove = ov2640_remove,
1184 .id_table = ov2640_id,
1185 };
1186
1187 /*
1188 * Module functions
1189 */
ov2640_module_init(void)1190 static int __init ov2640_module_init(void)
1191 {
1192 return i2c_add_driver(&ov2640_i2c_driver);
1193 }
1194
ov2640_module_exit(void)1195 static void __exit ov2640_module_exit(void)
1196 {
1197 i2c_del_driver(&ov2640_i2c_driver);
1198 }
1199
1200 module_init(ov2640_module_init);
1201 module_exit(ov2640_module_exit);
1202
1203 MODULE_DESCRIPTION("SoC Camera driver for Omni Vision 2640 sensor");
1204 MODULE_AUTHOR("Alberto Panizzo");
1205 MODULE_LICENSE("GPL v2");
1206