1 /*
2 ** -----------------------------------------------------------------------------
3 **
4 **  Perle Specialix driver for Linux
5 **  Ported from existing RIO Driver for SCO sources.
6  *
7  *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
8  *
9  *      This program is free software; you can redistribute it and/or modify
10  *      it under the terms of the GNU General Public License as published by
11  *      the Free Software Foundation; either version 2 of the License, or
12  *      (at your option) any later version.
13  *
14  *      This program is distributed in the hope that it will be useful,
15  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *      GNU General Public License for more details.
18  *
19  *      You should have received a copy of the GNU General Public License
20  *      along with this program; if not, write to the Free Software
21  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 **
23 **	Module		: daemon.h
24 **	SID		: 1.3
25 **	Last Modified	: 11/6/98 11:34:09
26 **	Retrieved	: 11/6/98 11:34:21
27 **
28 **  ident @(#)daemon.h	1.3
29 **
30 ** -----------------------------------------------------------------------------
31 */
32 
33 #ifndef	__rio_daemon_h__
34 #define	__rio_daemon_h__
35 
36 
37 /*
38 ** structures used on /dev/rio
39 */
40 
41 struct Error {
42 	unsigned int Error;
43 	unsigned int Entry;
44 	unsigned int Other;
45 };
46 
47 struct DownLoad {
48 	char __user *DataP;
49 	unsigned int Count;
50 	unsigned int ProductCode;
51 };
52 
53 /*
54 ** A few constants....
55 */
56 #ifndef MAX_VERSION_LEN
57 #define	MAX_VERSION_LEN	256
58 #endif
59 
60 #ifndef MAX_XP_CTRL_LEN
61 #define	MAX_XP_CTRL_LEN 16	/* ALSO IN PORT.H */
62 #endif
63 
64 struct PortSetup {
65 	unsigned int From;		/* Set/Clear XP & IXANY Control from this port.... */
66 	unsigned int To;		/* .... to this port */
67 	unsigned int XpCps;		/* at this speed */
68 	char XpOn[MAX_XP_CTRL_LEN];	/* this is the start string */
69 	char XpOff[MAX_XP_CTRL_LEN];	/* this is the stop string */
70 	u8 IxAny;			/* enable/disable IXANY */
71 	u8 IxOn;			/* enable/disable IXON */
72 	u8 Lock;			/* lock port params */
73 	u8 Store;			/* store params across closes */
74 	u8 Drain;			/* close only when drained */
75 };
76 
77 struct LpbReq {
78 	unsigned int Host;
79 	unsigned int Link;
80 	struct LPB __user *LpbP;
81 };
82 
83 struct RupReq {
84 	unsigned int HostNum;
85 	unsigned int RupNum;
86 	struct RUP __user *RupP;
87 };
88 
89 struct PortReq {
90 	unsigned int SysPort;
91 	struct Port __user *PortP;
92 };
93 
94 struct StreamInfo {
95 	unsigned int SysPort;
96 	int RQueue;
97 	int WQueue;
98 };
99 
100 struct HostReq {
101 	unsigned int HostNum;
102 	struct Host __user *HostP;
103 };
104 
105 struct HostDpRam {
106 	unsigned int HostNum;
107 	struct DpRam __user *DpRamP;
108 };
109 
110 struct DebugCtrl {
111 	unsigned int SysPort;
112 	unsigned int Debug;
113 	unsigned int Wait;
114 };
115 
116 struct MapInfo {
117 	unsigned int FirstPort;		/* 8 ports, starting from this (tty) number */
118 	unsigned int RtaUnique;		/* reside on this RTA (unique number) */
119 };
120 
121 struct MapIn {
122 	unsigned int NumEntries;	/* How many port sets are we mapping? */
123 	struct MapInfo *MapInfoP;	/* Pointer to (user space) info */
124 };
125 
126 struct SendPack {
127 	unsigned int PortNum;
128 	unsigned char Len;
129 	unsigned char Data[PKT_MAX_DATA_LEN];
130 };
131 
132 struct SpecialRupCmd {
133 	struct PKT Packet;
134 	unsigned short Host;
135 	unsigned short RupNum;
136 };
137 
138 struct IdentifyRta {
139 	unsigned long RtaUnique;
140 	u8 ID;
141 };
142 
143 struct KillNeighbour {
144 	unsigned long UniqueNum;
145 	u8 Link;
146 };
147 
148 struct rioVersion {
149 	char version[MAX_VERSION_LEN];
150 	char relid[MAX_VERSION_LEN];
151 	int buildLevel;
152 	char buildDate[MAX_VERSION_LEN];
153 };
154 
155 
156 /*
157 **	RIOC commands are for the daemon type operations
158 **
159 ** 09.12.1998 ARG - ESIL 0776 part fix
160 ** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a
161 ** #ifndef here first.
162 ** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now
163 ** allowed to be used by customers.
164 */
165 #ifndef RIOC
166 #define	RIOC	('R'<<8)|('i'<<16)|('o'<<24)
167 #endif
168 
169 /*
170 ** Boot stuff
171 */
172 #define	RIO_GET_TABLE     (RIOC | 100)
173 #define RIO_PUT_TABLE     (RIOC | 101)
174 #define RIO_ASSIGN_RTA    (RIOC | 102)
175 #define RIO_DELETE_RTA    (RIOC | 103)
176 #define	RIO_HOST_FOAD	  (RIOC | 104)
177 #define	RIO_QUICK_CHECK	  (RIOC | 105)
178 #define RIO_SIGNALS_ON    (RIOC | 106)
179 #define RIO_SIGNALS_OFF   (RIOC | 107)
180 #define	RIO_CHANGE_NAME   (RIOC | 108)
181 #define RIO_DOWNLOAD      (RIOC | 109)
182 #define	RIO_GET_LOG	  (RIOC | 110)
183 #define	RIO_SETUP_PORTS   (RIOC | 111)
184 #define RIO_ALL_MODEM     (RIOC | 112)
185 
186 /*
187 ** card state, debug stuff
188 */
189 #define	RIO_NUM_HOSTS	  (RIOC | 120)
190 #define	RIO_HOST_LPB	  (RIOC | 121)
191 #define	RIO_HOST_RUP	  (RIOC | 122)
192 #define	RIO_HOST_PORT	  (RIOC | 123)
193 #define	RIO_PARMS 	  (RIOC | 124)
194 #define RIO_HOST_REQ	  (RIOC | 125)
195 #define	RIO_READ_CONFIG	  (RIOC | 126)
196 #define	RIO_SET_CONFIG	  (RIOC | 127)
197 #define	RIO_VERSID	  (RIOC | 128)
198 #define	RIO_FLAGS	  (RIOC | 129)
199 #define	RIO_SETDEBUG	  (RIOC | 130)
200 #define	RIO_GETDEBUG	  (RIOC | 131)
201 #define	RIO_READ_LEVELS   (RIOC | 132)
202 #define	RIO_SET_FAST_BUS  (RIOC | 133)
203 #define	RIO_SET_SLOW_BUS  (RIOC | 134)
204 #define	RIO_SET_BYTE_MODE (RIOC | 135)
205 #define	RIO_SET_WORD_MODE (RIOC | 136)
206 #define RIO_STREAM_INFO   (RIOC | 137)
207 #define	RIO_START_POLLER  (RIOC | 138)
208 #define	RIO_STOP_POLLER   (RIOC | 139)
209 #define	RIO_LAST_ERROR    (RIOC | 140)
210 #define	RIO_TICK	  (RIOC | 141)
211 #define	RIO_TOCK	  (RIOC | 241)	/* I did this on purpose, you know. */
212 #define	RIO_SEND_PACKET   (RIOC | 142)
213 #define	RIO_SET_BUSY	  (RIOC | 143)
214 #define	SPECIAL_RUP_CMD   (RIOC | 144)
215 #define	RIO_FOAD_RTA      (RIOC | 145)
216 #define	RIO_ZOMBIE_RTA    (RIOC | 146)
217 #define RIO_IDENTIFY_RTA  (RIOC | 147)
218 #define RIO_KILL_NEIGHBOUR (RIOC | 148)
219 #define RIO_DEBUG_MEM     (RIOC | 149)
220 /*
221 ** 150 - 167 used.....   See below
222 */
223 #define RIO_GET_PORT_SETUP (RIOC | 168)
224 #define RIO_RESUME        (RIOC | 169)
225 #define	RIO_MESG	(RIOC | 170)
226 #define	RIO_NO_MESG	(RIOC | 171)
227 #define	RIO_WHAT_MESG	(RIOC | 172)
228 #define RIO_HOST_DPRAM	(RIOC | 173)
229 #define RIO_MAP_B50_TO_50	(RIOC | 174)
230 #define RIO_MAP_B50_TO_57600	(RIOC | 175)
231 #define RIO_MAP_B110_TO_110	(RIOC | 176)
232 #define RIO_MAP_B110_TO_115200	(RIOC | 177)
233 #define RIO_GET_PORT_PARAMS	(RIOC | 178)
234 #define RIO_SET_PORT_PARAMS	(RIOC | 179)
235 #define RIO_GET_PORT_TTY	(RIOC | 180)
236 #define RIO_SET_PORT_TTY	(RIOC | 181)
237 #define RIO_SYSLOG_ONLY	(RIOC | 182)
238 #define RIO_SYSLOG_CONS	(RIOC | 183)
239 #define RIO_CONS_ONLY	(RIOC | 184)
240 #define RIO_BLOCK_OPENS	(RIOC | 185)
241 
242 /*
243 ** 02.03.1999 ARG - ESIL 0820 fix :
244 ** RIOBootMode is no longer use by the driver, so these ioctls
245 ** are now obsolete :
246 **
247 #define RIO_GET_BOOT_MODE	(RIOC | 186)
248 #define RIO_SET_BOOT_MODE	(RIOC | 187)
249 **
250 */
251 
252 #define RIO_MEM_DUMP	(RIOC | 189)
253 #define RIO_READ_REGISTER	(RIOC | 190)
254 #define RIO_GET_MODTYPE	(RIOC | 191)
255 #define RIO_SET_TIMER	(RIOC | 192)
256 #define RIO_READ_CHECK	(RIOC | 196)
257 #define RIO_WAITING_FOR_RESTART	(RIOC | 197)
258 #define RIO_BIND_RTA	(RIOC | 198)
259 #define RIO_GET_BINDINGS	(RIOC | 199)
260 #define RIO_PUT_BINDINGS	(RIOC | 200)
261 
262 #define	RIO_MAKE_DEV		(RIOC | 201)
263 #define	RIO_MINOR		(RIOC | 202)
264 
265 #define	RIO_IDENTIFY_DRIVER	(RIOC | 203)
266 #define	RIO_DISPLAY_HOST_CFG	(RIOC | 204)
267 
268 
269 /*
270 ** MAKE_DEV / MINOR stuff
271 */
272 #define	RIO_DEV_DIRECT		0x0000
273 #define	RIO_DEV_MODEM		0x0200
274 #define	RIO_DEV_XPRINT		0x0400
275 #define	RIO_DEV_MASK		0x0600
276 
277 /*
278 ** port management, xprint stuff
279 */
280 #define	rIOCN(N)	(RIOC|(N))
281 #define	rIOCR(N,T)	(RIOC|(N))
282 #define	rIOCW(N,T)	(RIOC|(N))
283 
284 #define	RIO_GET_XP_ON     rIOCR(150,char[16])	/* start xprint string */
285 #define	RIO_SET_XP_ON     rIOCW(151,char[16])
286 #define	RIO_GET_XP_OFF    rIOCR(152,char[16])	/* finish xprint string */
287 #define	RIO_SET_XP_OFF    rIOCW(153,char[16])
288 #define	RIO_GET_XP_CPS    rIOCR(154,int)	/* xprint CPS */
289 #define	RIO_SET_XP_CPS    rIOCW(155,int)
290 #define RIO_GET_IXANY     rIOCR(156,int)	/* ixany allowed? */
291 #define RIO_SET_IXANY     rIOCW(157,int)
292 #define RIO_SET_IXANY_ON  rIOCN(158)	/* allow ixany */
293 #define RIO_SET_IXANY_OFF rIOCN(159)	/* disallow ixany */
294 #define RIO_GET_MODEM     rIOCR(160,int)	/* port is modem/direct line? */
295 #define RIO_SET_MODEM     rIOCW(161,int)
296 #define RIO_SET_MODEM_ON  rIOCN(162)	/* port is a modem */
297 #define RIO_SET_MODEM_OFF rIOCN(163)	/* port is direct */
298 #define RIO_GET_IXON      rIOCR(164,int)	/* ixon allowed? */
299 #define RIO_SET_IXON      rIOCW(165,int)
300 #define RIO_SET_IXON_ON   rIOCN(166)	/* allow ixon */
301 #define RIO_SET_IXON_OFF  rIOCN(167)	/* disallow ixon */
302 
303 #define RIO_GET_SIVIEW	  ((('s')<<8) | 106)	/* backwards compatible with SI */
304 
305 #define	RIO_IOCTL_UNKNOWN	-2
306 
307 #endif
308