| /linux-2.4.37.9/arch/sh/lib/ |
| D | checksum.S | 57 add #-2, r5 ! Alignment uses up two bytes.
59 bt/s 1f ! Jump if we had at least two bytes.
201 add #-2,r6 ! Alignment uses up two bytes.
202 cmp/pz r6 ! Jump if we had at least two bytes.
246 ! src and dest equally aligned, but to a two byte boundary.
247 ! Handle first two bytes as a special case
|
| /linux-2.4.37.9/Documentation/BK-usage/ |
| D | 00-INDEX | 20 csets-to-patches: Produces a delta of two BK repositories, in the form
28 cset-to-linus: Produces a delta of two BK repositories, in the form of
|
| D | bk-kernel-howto.txt | 60 Once you have established a common baseline between two source trees --
61 a common parent -- then you can merge changesets between those two
146 helps when two unrelated changes may "pollute" the same area of code, or
260 2) How do I use tags / get a diff between two kernel versions?
264 to get a snapshot starting and ending at any two points in time.
266 these two examples:
|
| /linux-2.4.37.9/Documentation/cdrom/ |
| D | mcdx | 2 It is able to "live together" with mcd.c, if you have at least two Mitsumi
35 connected two drives to the same irq. So it's `only' a
|
| /linux-2.4.37.9/Documentation/networking/ |
| D | PLIP.txt | 13 This device interface allows a point-to-point connection between two
31 The PLIP cable is all that's needed to connect two Linux boxes, and it
34 Connecting two Linux boxes takes only a second's decision and a few
90 Alpha, as of this writing). Between two such polls, there are 10^6/HZ usecs.
92 quite possible for the trigger timeout to expire between two such polls, as
135 two DB-25 male connectors symmetrically connected as follows:
|
| D | eql.txt | 17 Which is worse? A huge fee for a 56K leased line or two phone lines?
107 could argue that MTU should be roughly half the usual size for two
135 Enslaving devices by hand requires two utility programs: eql_enslave
246 All testing I have done was with two 28.8 V.FC modems, one connecting
354 I have done some testing of this software, with two goals in
359 of SLIP connections run between two Linux systems (1.1.84) using
384 the load across two or more Cirrus chips.
|
| D | pktgen.txt | 7 3a. Create more scripts for different interfaces. Up to thirty-two
11 5. After this two commands are defined:
|
| D | arcnet-hardware.txt | 23 First of all, you can get ARCnet cards in at least two speeds: 2.5 Mbps
35 There are two "types" of ARCnet - STAR topology and BUS topology. This
89 ARCnet (the classic 2.5 Mbps version) can be connected by two different
98 Cards for coax cabling are shipped in two different variants: for BUS and
105 are two types of hubs - active and passive. Passive hubs are small boxes
117 hubs come in two variants - dumb and smart. The dumb variant just
135 more than eleven active hubs between any two computers. That of course
142 Remember, that you can not connect two passive hubs together. The power loss
169 But that is not all! The two types can be connected together. According to
205 of the TP cards has two RJ (phone-cord style) connectors. The cards are
[all …]
|
| /linux-2.4.37.9/Documentation/ia64/ |
| D | efirtc.txt | 42 The driver exposes two interfaces, one via the device file and a set of
49 "public" API of the two drivers. The specifics of the legacy RTC are still
80 Those two ioctl()s can be exercised with the hwclock command:
119 However writing such a program should be hard by simply using those two
|
| /linux-2.4.37.9/Documentation/sound/ |
| D | btaudio | 38 The chip knows two different modes. btaudio registers two dsp
68 downsampling by powers of two, so you can ask for more usual sample rates
|
| D | OPL3-SA2 | 42 Older versions of this driver (pre-December 2000) had two mixers,
73 With the addition of PnP support to the driver, two new parameters
85 provided by Peter Englmaier) are two new parameters:
108 manual configuration. There are two ways of doing this. The most
|
| /linux-2.4.37.9/Documentation/arm/ |
| D | MEMC | 38 two writes and zero reads).
45 to a possible two writes and zero reads).
|
| /linux-2.4.37.9/Documentation/isdn/ |
| D | README.syncppp | 35 all devices at once. If you want to use two PPP connections
36 at the same time, you have to connect the ipppd to two
|
| /linux-2.4.37.9/arch/alpha/lib/ |
| D | strlen.S | 34 nop # helps dual issue last two insns
|
| /linux-2.4.37.9/drivers/char/drm-4.0/ |
| D | gamma_drv.c | 319 struct pci_dev *d = NULL, *one = NULL, *two = NULL; in gamma_find_devices() local
330 two = pci_find_device(PCI_VENDOR_ID_3DLABS,PCI_DEVICE_ID_3DLABS_MX,one); in gamma_find_devices()
331 if (!two) return 1; in gamma_find_devices()
334 if (PCI_SLOT(d->devfn) != PCI_SLOT(two->devfn)) return 1; in gamma_find_devices()
|
| /linux-2.4.37.9/arch/ppc64/kernel/ |
| D | mf.c | 426 struct StackElement * two = NULL; in intReceived() local
472 two = head; in intReceived()
479 if ( two != NULL ) in intReceived()
497 struct StackElement * two = NULL; in ackReceived() local
561 two = head; in ackReceived()
567 if ( two != NULL ) in ackReceived()
|
| /linux-2.4.37.9/arch/m68k/ifpsp060/ |
| D | iskeleton.S | 188 | region. Note: the routine must lock two pages if the operand
189 | spans two pages.
256 | Note: the routine must unlock two pages if the operand spans
257 | two pages.
|
| /linux-2.4.37.9/Documentation/powerpc/ |
| D | cpu_features.txt | 47 The END_FTR_SECTION macro has two simpler variations: END_FTR_SECTION_IFSET
49 cur_cpu_spec[0]->cpu_features) or is cleared, respectively. These two macros
|
| /linux-2.4.37.9/arch/i386/lib/ |
| D | checksum.S | 73 subl $2, %ecx # Alignment uses up two bytes.
74 jae 1f # Jump if we had at least two bytes.
302 subl $2, %ecx # Alignment uses up two bytes.
303 jae 1f # Jump if we had at least two bytes.
|
| /linux-2.4.37.9/Documentation/input/ |
| D | joystick-parport.txt | 63 port), and combine the currents of two or more data bits together.
81 NES and SNES pads have two input bits, Clock and Latch, which drive the
250 For joysticks with two buttons you connect the second button to pin 7 on
285 For two button sticks you also connect the other button.
460 gc_2 and gc_3 as additional command line parameters for two more parallel
492 can use db9_2 and db9_3 as additional command line parameters for two
507 use tgfx_2 and tgfx_3 as additional command line parameters for two more
|
| /linux-2.4.37.9/Documentation/ |
| D | ramdisk.txt | 64 and the floppy can be booted with LILO, or the two can be separate as
67 If you are using a two-disk boot/root setup (kernel on #1, RAM disk image
95 two floppy configuration, you will need the chance to switch disks,
108 The usage of the word (two bytes) that "rdev -r" sets in the kernel image
122 Consider a typical two floppy disk setup, where you will have the
|
| D | smart-config.txt | 25 /* Code for model two */
48 include/config/foo/model/two.h
|
| /linux-2.4.37.9/arch/cris/drivers/bluetooth/ |
| D | bt.patch | 28 +# The following two lines were added by arch/cris/drivers/bluetooth/Makefile
|
| /linux-2.4.37.9/Documentation/vm/ |
| D | balance | 6 There are two reasons to be requesting non __GFP_WAIT allocations:
34 In 2.3, zone balancing can be done in one of two ways: depending on the
57 The appended patch implements the second solution. It also "fixes" two
|
| /linux-2.4.37.9/Documentation/m68k/ |
| D | README.buddha | 26 Setting the base address should be done in two steps, just
99 IRQ-lines of the IDE-ports by reading from the three (two
110 polls two words out of the same address of IDE port since
182 system: Sometimes two more clock cycles are inserted by the
|