| /linux-2.4.37.9/drivers/mtd/chips/ |
| D | jedec.c | 360 const unsigned long Reset = 0xF0; in jedec_probe8() local
373 flwrite(Reset,0x555); in jedec_probe8()
389 flwrite(Reset,0x555); in jedec_probe8()
395 flwrite(Reset,0x555); in jedec_probe8()
420 const unsigned long Reset = 0xF0F0F0F0; in jedec_probe32() local
433 flwrite(Reset,0x555); in jedec_probe32()
444 flwrite(Reset,0x555); in jedec_probe32()
459 flwrite(Reset,0x555); in jedec_probe32()
|
| /linux-2.4.37.9/drivers/scsi/ |
| D | README.BusLogic | 134 The Error Recovery option is reported as "Default", "Hard Reset",
135 "Bus Device Reset", "None" or a sequence of "D", "H", "B", and "N" letters.
488 Reset and Bus Device Reset options based on the recommendation of the SCSI
494 Adapter Hard Reset which also causes a SCSI Bus Reset.
499 a Bus Device Reset message to the individual Target Device causing the
502 Device Reset message was sent, then a Hard Reset will be attempted.
507 This option should only be selected if a SCSI Bus Reset or Bus Device Reset
516 selects Hard Reset, "B" selects Bus Device Reset, and "N" selects None.
528 Adapter Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI
547 Reset.
|
| D | Config.in | 118 bool ' Reset SCSI-devices at boottime' CONFIG_IBMMCA_SCSI_DEV_RESET
|
| D | README.ncr53c8xx | 28 8.9 Reset all logical units of a target
539 8.9 Reset all logical units of a target
1354 Bit 0x02 : RST SCSI BUS Reset
|
| D | README.tmscsim | 315 *2 0x04 4 Reset SCSI Bus on startup.
|
| /linux-2.4.37.9/Documentation/networking/ |
| D | x25-iface.txt | 86 handle such N-Reset events gracefully. And frequent N-Reset events
|
| D | 8139too.txt | 440 * Reset NWay registers to sane defaults on rtl8139_open/hw_start
|
| /linux-2.4.37.9/Documentation/arm/SA1100/ |
| D | PCMCIA | 296 S0Reset 3 Slot 0 Reset (RW)
300 S1Reset 7 Slot 1 Reset (RW)
340 P0_SW_RST 23 Slot 0 Reset
348 P1_SW_RST 31 Slot 1 Reset
|
| /linux-2.4.37.9/drivers/net/ |
| D | ariadne.h | 48 volatile u_short Reset; /* Reset Chip on Read Access */ member
|
| D | ariadne.c | 229 in = lance->Reset; in ariadne_open()
|
| /linux-2.4.37.9/Documentation/isdn/ |
| D | README.audio | 40 AT+VIP Reset all audio parameters.
|
| D | README | 125 AT&F Reset all registers and profile to "factory-defaults"
|
| /linux-2.4.37.9/drivers/usb/ |
| D | catc.c | 87 Reset = 0xf4, enumerator
208 #define catc_reset(catc) catc_ctrl_msg(catc, USB_DIR_OUT, Reset, 0, 0, NULL, 0)
|
| /linux-2.4.37.9/drivers/scsi/sym53c8xx_2/ |
| D | ChangeLog.txt | 68 - Reset 53C896 and 53C1010 chip according to the manual.
|
| D | Documentation.txt | 26 8.7 Reset all logical units of a target
382 8.7 Reset all logical units of a target
765 Bit 0x02 : RST SCSI BUS Reset
|
| /linux-2.4.37.9/include/asm-arm/arch-sa1100/ |
| D | h3600_gpio.h | 498 #define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset )
|
| /linux-2.4.37.9/Documentation/sparc/ |
| D | sbus_drivers.txt | 139 #define CONTROL_RESET 0x00000001 /* Reset hardware */
|
| /linux-2.4.37.9/arch/ppc/kernel/ |
| D | head_8xx.S | 188 STD_EXCEPTION(0x100, Reset, UnknownException)
|
| D | head.S | 334 STD_EXCEPTION(0x100, Reset, __secondary_start_psurge)
337 STD_EXCEPTION(0x100, Reset, UnknownException)
|
| /linux-2.4.37.9/Documentation/ |
| D | watchdog-api.txt | 130 WDIOF_OVERHEAT Reset due to CPU overheat
|
| /linux-2.4.37.9/arch/m68k/ |
| D | config.in | 250 bool ' Reset SCSI-devices at boottime' CONFIG_ATARI_SCSI_RESET_BOOT
|
| /linux-2.4.37.9/drivers/parport/ |
| D | ChangeLog | 320 * ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd
|
| /linux-2.4.37.9/drivers/scsi/aic7xxx/ |
| D | README.aic79xx | 104 - Reset the bus on an SE->LVD change. This is required
|
| /linux-2.4.37.9/drivers/usb/serial/ |
| D | keyspan_pda.S | 197 ljmp 0 ; USB Reset
|
| D | xircom_pgs.S | 199 ljmp 0 ; USB Reset
|