1 /****************************************************************************** 2 * 3 * Name: lm80.h 4 * Project: Gigabit Ethernet Adapters, Common Modules 5 * Purpose: Contains all defines for the LM80 Chip 6 * (National Semiconductor). 7 * 8 ******************************************************************************/ 9 10 /****************************************************************************** 11 * 12 * (C)Copyright 1998-2002 SysKonnect. 13 * (C)Copyright 2002-2003 Marvell. 14 * 15 * This program is free software; you can redistribute it and/or modify 16 * it under the terms of the GNU General Public License as published by 17 * the Free Software Foundation; either version 2 of the License, or 18 * (at your option) any later version. 19 * 20 * The information in this file is provided "AS IS" without warranty. 21 * 22 ******************************************************************************/ 23 24 #ifndef __INC_LM80_H 25 #define __INC_LM80_H 26 27 #ifdef __cplusplus 28 extern "C" { 29 #endif /* __cplusplus */ 30 31 /* defines ********************************************************************/ 32 33 /* 34 * LM80 register definition 35 * 36 * All registers are 8 bit wide 37 */ 38 #define LM80_CFG 0x00 /* Configuration Register */ 39 #define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */ 40 #define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */ 41 #define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */ 42 #define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */ 43 #define LM80_FAN_CTRL 0x05 /* Fan Devisor/RST#/OS# Register */ 44 #define LM80_TEMP_CTRL 0x06 /* OS# Config, Temp Res. Reg */ 45 /* 0x07 - 0x1f reserved */ 46 /* current values */ 47 #define LM80_VT0_IN 0x20 /* current Voltage 0 value */ 48 #define LM80_VT1_IN 0x21 /* current Voltage 1 value */ 49 #define LM80_VT2_IN 0x22 /* current Voltage 2 value */ 50 #define LM80_VT3_IN 0x23 /* current Voltage 3 value */ 51 #define LM80_VT4_IN 0x24 /* current Voltage 4 value */ 52 #define LM80_VT5_IN 0x25 /* current Voltage 5 value */ 53 #define LM80_VT6_IN 0x26 /* current Voltage 6 value */ 54 #define LM80_TEMP_IN 0x27 /* current Temperature value */ 55 #define LM80_FAN1_IN 0x28 /* current Fan 1 count */ 56 #define LM80_FAN2_IN 0x29 /* current Fan 2 count */ 57 /* limit values */ 58 #define LM80_VT0_HIGH_LIM 0x2a /* high limit val for Voltage 0 */ 59 #define LM80_VT0_LOW_LIM 0x2b /* low limit val for Voltage 0 */ 60 #define LM80_VT1_HIGH_LIM 0x2c /* high limit val for Voltage 1 */ 61 #define LM80_VT1_LOW_LIM 0x2d /* low limit val for Voltage 1 */ 62 #define LM80_VT2_HIGH_LIM 0x2e /* high limit val for Voltage 2 */ 63 #define LM80_VT2_LOW_LIM 0x2f /* low limit val for Voltage 2 */ 64 #define LM80_VT3_HIGH_LIM 0x30 /* high limit val for Voltage 3 */ 65 #define LM80_VT3_LOW_LIM 0x31 /* low limit val for Voltage 3 */ 66 #define LM80_VT4_HIGH_LIM 0x32 /* high limit val for Voltage 4 */ 67 #define LM80_VT4_LOW_LIM 0x33 /* low limit val for Voltage 4 */ 68 #define LM80_VT5_HIGH_LIM 0x34 /* high limit val for Voltage 5 */ 69 #define LM80_VT5_LOW_LIM 0x35 /* low limit val for Voltage 5 */ 70 #define LM80_VT6_HIGH_LIM 0x36 /* high limit val for Voltage 6 */ 71 #define LM80_VT6_LOW_LIM 0x37 /* low limit val for Voltage 6 */ 72 #define LM80_THOT_LIM_UP 0x38 /* hot temperature limit (high) */ 73 #define LM80_THOT_LIM_LO 0x39 /* hot temperature limit (low) */ 74 #define LM80_TOS_LIM_UP 0x3a /* OS temperature limit (high) */ 75 #define LM80_TOS_LIM_LO 0x3b /* OS temperature limit (low) */ 76 #define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */ 77 #define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */ 78 /* 0x3e - 0x3f reserved */ 79 80 /* 81 * LM80 bit definitions 82 */ 83 84 /* LM80_CFG Configuration Register */ 85 #define LM80_CFG_START (1<<0) /* start monitoring operation */ 86 #define LM80_CFG_INT_ENA (1<<1) /* enables the INT# Interrupt output */ 87 #define LM80_CFG_INT_POL (1<<2) /* INT# pol: 0 act low, 1 act high */ 88 #define LM80_CFG_INT_CLR (1<<3) /* disables INT#/RST_OUT#/OS# outputs */ 89 #define LM80_CFG_RESET (1<<4) /* signals a reset */ 90 #define LM80_CFG_CHASS_CLR (1<<5) /* clears Chassis Intrusion (CI) pin */ 91 #define LM80_CFG_GPO (1<<6) /* drives the GPO# pin */ 92 #define LM80_CFG_INIT (1<<7) /* restore power on defaults */ 93 94 /* LM80_ISRC_1 Interrupt Status Register 1 */ 95 /* LM80_IMSK_1 Interrupt Mask Register 1 */ 96 #define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */ 97 #define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */ 98 #define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */ 99 #define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */ 100 #define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */ 101 #define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */ 102 #define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */ 103 #define LM80_IS_INT_IN (1<<7) /* state of INT_IN# */ 104 105 /* LM80_ISRC_2 Interrupt Status Register 2 */ 106 /* LM80_IMSK_2 Interrupt Mask Register 2 */ 107 #define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */ 108 #define LM80_IS_BTI (1<<1) /* state of BTI# pin */ 109 #define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */ 110 #define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */ 111 #define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */ 112 #define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */ 113 /* bit 6 and 7 are reserved in LM80_ISRC_2 */ 114 #define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */ 115 #define LM80_IS_OT_IRQ_MD (1<<7) /* OS temperature interrupt mode */ 116 117 /* LM80_FAN_CTRL Fan Devisor/RST#/OS# Register */ 118 #define LM80_FAN1_MD_SEL (1<<0) /* Fan 1 mode select */ 119 #define LM80_FAN2_MD_SEL (1<<1) /* Fan 2 mode select */ 120 #define LM80_FAN1_PRM_CTL (3<<2) /* Fan 1 speed control */ 121 #define LM80_FAN2_PRM_CTL (3<<4) /* Fan 2 speed control */ 122 #define LM80_FAN_OS_ENA (1<<6) /* enable OS mode on RST_OUT#/OS# pins*/ 123 #define LM80_FAN_RST_ENA (1<<7) /* sets RST_OUT#/OS# pins in RST mode */ 124 125 /* LM80_TEMP_CTRL OS# Config, Temp Res. Reg */ 126 #define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */ 127 #define LM80_TEMP_OS_POL (1<<1) /* select OS# polarity */ 128 #define LM80_TEMP_OS_MODE (1<<2) /* selects Interrupt mode */ 129 #define LM80_TEMP_RES (1<<3) /* selects 9 or 11 bit temp resulution*/ 130 #define LM80_TEMP_LSB (0xf<<4)/* 4 LSBs of 11 bit temp data */ 131 #define LM80_TEMP_LSB_9 (1<<7) /* LSB of 9 bit temperature data */ 132 133 /* 0x07 - 0x1f reserved */ 134 /* LM80_VT0_IN current Voltage 0 value */ 135 /* LM80_VT1_IN current Voltage 1 value */ 136 /* LM80_VT2_IN current Voltage 2 value */ 137 /* LM80_VT3_IN current Voltage 3 value */ 138 /* LM80_VT4_IN current Voltage 4 value */ 139 /* LM80_VT5_IN current Voltage 5 value */ 140 /* LM80_VT6_IN current Voltage 6 value */ 141 /* LM80_TEMP_IN current temperature value */ 142 /* LM80_FAN1_IN current Fan 1 count */ 143 /* LM80_FAN2_IN current Fan 2 count */ 144 /* LM80_VT0_HIGH_LIM high limit val for Voltage 0 */ 145 /* LM80_VT0_LOW_LIM low limit val for Voltage 0 */ 146 /* LM80_VT1_HIGH_LIM high limit val for Voltage 1 */ 147 /* LM80_VT1_LOW_LIM low limit val for Voltage 1 */ 148 /* LM80_VT2_HIGH_LIM high limit val for Voltage 2 */ 149 /* LM80_VT2_LOW_LIM low limit val for Voltage 2 */ 150 /* LM80_VT3_HIGH_LIM high limit val for Voltage 3 */ 151 /* LM80_VT3_LOW_LIM low limit val for Voltage 3 */ 152 /* LM80_VT4_HIGH_LIM high limit val for Voltage 4 */ 153 /* LM80_VT4_LOW_LIM low limit val for Voltage 4 */ 154 /* LM80_VT5_HIGH_LIM high limit val for Voltage 5 */ 155 /* LM80_VT5_LOW_LIM low limit val for Voltage 5 */ 156 /* LM80_VT6_HIGH_LIM high limit val for Voltage 6 */ 157 /* LM80_VT6_LOW_LIM low limit val for Voltage 6 */ 158 /* LM80_THOT_LIM_UP hot temperature limit (high) */ 159 /* LM80_THOT_LIM_LO hot temperature limit (low) */ 160 /* LM80_TOS_LIM_UP OS temperature limit (high) */ 161 /* LM80_TOS_LIM_LO OS temperature limit (low) */ 162 /* LM80_FAN1_COUNT_LIM Fan 1 count limit (high) */ 163 /* LM80_FAN2_COUNT_LIM Fan 2 count limit (low) */ 164 /* 0x3e - 0x3f reserved */ 165 166 #define LM80_ADDR 0x28 /* LM80 default addr */ 167 168 /* typedefs *******************************************************************/ 169 170 171 /* function prototypes ********************************************************/ 172 173 #ifdef __cplusplus 174 } 175 #endif /* __cplusplus */ 176 177 #endif /* __INC_LM80_H */ 178