1 /* 2 * sbpcd.h Specify interface address and interface type here. 3 */ 4 5 /* 6 * Attention! This file contains user-serviceable parts! 7 * I recommend to make use of it... 8 * If you feel helpless, look into linux/Documentation/cdrom/sbpcd 9 * (good idea anyway, at least before mailing me). 10 * 11 * The definitions for the first controller can get overridden by 12 * the kernel command line ("lilo boot option"). 13 * Examples: 14 * sbpcd=0x300,LaserMate 15 * or 16 * sbpcd=0x230,SoundBlaster 17 * or 18 * sbpcd=0x338,SoundScape 19 * or 20 * sbpcd=0x2C0,Teac16bit 21 * 22 * If sbpcd gets used as a module, you can load it with 23 * insmod sbpcd.o sbpcd=0x300,0 24 * or 25 * insmod sbpcd.o sbpcd=0x230,1 26 * or 27 * insmod sbpcd.o sbpcd=0x338,2 28 * or 29 * insmod sbpcd.o sbpcd=0x2C0,3 30 * respective to override the configured address and type. 31 */ 32 33 /* 34 * define your CDROM port base address as CDROM_PORT 35 * and specify the type of your interface card as SBPRO. 36 * 37 * address: 38 * ======== 39 * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ... 40 * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ... 41 * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to 42 * specify the REAL address here, not the configuration port address. Look 43 * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let 44 * sbpcd auto-probe, if you are not firm with the address. 45 * There are some soundcards on the market with 0x0630, 0x0650, ...; their 46 * type is not obvious (both types are possible). 47 * 48 * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1. 49 * if your soundcard has its CDROM port above 0x300, specify 50 * that address and try SBPRO 0 first. 51 * if your SoundScape configuration port is at 0x330, specify 52 * 0x338 and SBPRO 2. 53 * 54 * interface type: 55 * =============== 56 * set SBPRO to 1 for "true" SoundBlaster card 57 * set SBPRO to 0 for "compatible" soundcards and 58 * for "poor" (no sound) interface cards. 59 * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards 60 * set SBPRO to 3 for Teac 16bit interface cards 61 * 62 * Almost all "compatible" sound boards need to set SBPRO to 0. 63 * If SBPRO is set wrong, the drives will get found - but any 64 * data access will give errors (audio access will work). 65 * The "OmniCD" no-sound interface card from CreativeLabs and most Teac 66 * interface cards need SBPRO 1. 67 * 68 * sound base: 69 * =========== 70 * The SOUND_BASE definition tells if we should try to turn the CD sound 71 * channels on. It will only be of use regarding soundcards with a SbPro 72 * compatible mixer. 73 * 74 * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels 75 * #define SOUND_BASE 0 leaves the soundcard untouched 76 */ 77 #if !(SBPCD_ISSUE-1) /* first (or if you have only one) interface board: */ 78 #define CDROM_PORT 0x340 /* <-----------<< port address */ 79 #define SBPRO 0 /* <-----------<< interface type */ 80 #define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */ 81 #define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */ 82 #endif 83 #if !(SBPCD_ISSUE-2) /* ==================== second interface board: === */ 84 #define CDROM_PORT 0x344 /* <-----------<< port address */ 85 #define SBPRO 0 /* <-----------<< interface type */ 86 #define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */ 87 #define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0 */ 88 #endif 89 #if !(SBPCD_ISSUE-3) /* ===================== third interface board: === */ 90 #define CDROM_PORT 0x630 /* <-----------<< port address */ 91 #define SBPRO 1 /* <-----------<< interface type */ 92 #define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */ 93 #define SOUND_BASE 0x240 /* <-----------<< sound address of this card or 0 */ 94 #endif 95 #if !(SBPCD_ISSUE-4) /* ==================== fourth interface board: === */ 96 #define CDROM_PORT 0x634 /* <-----------<< port address */ 97 #define SBPRO 0 /* <-----------<< interface type */ 98 #define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */ 99 #define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0 */ 100 #endif 101 102 /* 103 * some more or less user dependent definitions - service them! 104 */ 105 106 /* Set this to 0 once you have configured your interface definitions right. */ 107 #define DISTRIBUTION 1 108 109 /* 110 * Time to wait after giving a message. 111 * This gets important if you enable non-standard DBG_xxx flags. 112 * You will see what happens if you omit the pause or make it 113 * too short. Be warned! 114 */ 115 #define KLOGD_PAUSE 1 116 117 /* tray control: eject tray if no disk is in */ 118 #if DISTRIBUTION 119 #define JUKEBOX 0 120 #else 121 #define JUKEBOX 1 122 #endif /* DISTRIBUTION */ 123 124 /* tray control: eject tray after last use */ 125 #if DISTRIBUTION 126 #define EJECT 0 127 #else 128 #define EJECT 1 129 #endif /* DISTRIBUTION */ 130 131 /* max. number of audio frames to read with one */ 132 /* request (allocates n* 2352 bytes kernel memory!) */ 133 /* may be freely adjusted, f.e. 75 (= 1 sec.), at */ 134 /* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */ 135 #define READ_AUDIO 0 136 137 /* Optimizations for the Teac CD-55A drive read performance. 138 * SBP_TEAC_SPEED can be changed here, or one can set the 139 * variable "teac" when loading as a module. 140 * Valid settings are: 141 * 0 - very slow - the recommended "DISTRIBUTION 1" setup. 142 * 1 - 2x performance with little overhead. No busy waiting. 143 * 2 - 4x performance with 5ms overhead per read. Busy wait. 144 * 145 * Setting SBP_TEAC_SPEED or the variable 'teac' to anything 146 * other than 0 may cause problems. If you run into them, first 147 * change SBP_TEAC_SPEED back to 0 and see if your drive responds 148 * normally. If yes, you are "allowed" to report your case - to help 149 * me with the driver, not to solve your hassle. Don�t mail if you 150 * simply are stuck into your own "tuning" experiments, you know? 151 */ 152 #define SBP_TEAC_SPEED 1 153 154 /*==========================================================================*/ 155 /*==========================================================================*/ 156 /* 157 * nothing to change below here if you are not fully aware what you're doing 158 */ 159 #ifndef _LINUX_SBPCD_H 160 161 #define _LINUX_SBPCD_H 162 /*==========================================================================*/ 163 /*==========================================================================*/ 164 /* 165 * driver's own read_ahead, data mode 166 */ 167 #define SBP_BUFFER_FRAMES 8 168 169 #define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */ 170 #undef FUTURE 171 #undef SAFE_MIXED 172 173 #define TEST_UPC 0 174 #define SPEA_TEST 0 175 #define TEST_STI 0 176 #define OLD_BUSY 0 177 #undef PATH_CHECK 178 #ifndef SOUND_BASE 179 #define SOUND_BASE 0 180 #endif 181 #if DISTRIBUTION 182 #undef SBP_TEAC_SPEED 183 #define SBP_TEAC_SPEED 0 184 #endif 185 /*==========================================================================*/ 186 /* 187 * DDI interface definitions 188 * "invented" by Fred N. van Kempen.. 189 */ 190 #define DDIOCSDBG 0x9000 191 192 /*==========================================================================*/ 193 /* 194 * "private" IOCTL functions 195 */ 196 #define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ 197 198 /*==========================================================================*/ 199 /* 200 * Debug output levels 201 */ 202 #define DBG_INF 1 /* necessary information */ 203 #define DBG_BSZ 2 /* BLOCK_SIZE trace */ 204 #define DBG_REA 3 /* READ status trace */ 205 #define DBG_CHK 4 /* MEDIA CHECK trace */ 206 #define DBG_TIM 5 /* datarate timer test */ 207 #define DBG_INI 6 /* initialization trace */ 208 #define DBG_TOC 7 /* tell TocEntry values */ 209 #define DBG_IOC 8 /* ioctl trace */ 210 #define DBG_STA 9 /* ResponseStatus() trace */ 211 #define DBG_ERR 10 /* cc_ReadError() trace */ 212 #define DBG_CMD 11 /* cmd_out() trace */ 213 #define DBG_WRN 12 /* give explanation before auto-probing */ 214 #define DBG_MUL 13 /* multi session code test */ 215 #define DBG_IDX 14 /* test code for drive_id !=0 */ 216 #define DBG_IOX 15 /* some special information */ 217 #define DBG_DID 16 /* drive ID test */ 218 #define DBG_RES 17 /* drive reset info */ 219 #define DBG_SPI 18 /* SpinUp test */ 220 #define DBG_IOS 19 /* ioctl trace: subchannel functions */ 221 #define DBG_IO2 20 /* ioctl trace: general */ 222 #define DBG_UPC 21 /* show UPC information */ 223 #define DBG_XA1 22 /* XA mode debugging */ 224 #define DBG_LCK 23 /* door (un)lock info */ 225 #define DBG_SQ1 24 /* dump SubQ frame */ 226 #define DBG_AUD 25 /* READ AUDIO debugging */ 227 #define DBG_SEQ 26 /* Sequoia interface configuration trace */ 228 #define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */ 229 #define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */ 230 #define DBG_TEA 29 /* TEAC CD-55A debugging trace */ 231 #define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */ 232 #define DBG_000 31 /* unnecessary information */ 233 234 /*==========================================================================*/ 235 /*==========================================================================*/ 236 237 /* 238 * bits of flags_cmd_out: 239 */ 240 #define f_respo3 0x100 241 #define f_putcmd 0x80 242 #define f_respo2 0x40 243 #define f_lopsta 0x20 244 #define f_getsta 0x10 245 #define f_ResponseStatus 0x08 246 #define f_obey_p_check 0x04 247 #define f_bit1 0x02 248 #define f_wait_if_busy 0x01 249 250 /* 251 * diskstate_flags: 252 */ 253 #define x80_bit 0x80 254 #define upc_bit 0x40 255 #define volume_bit 0x20 256 #define toc_bit 0x10 257 #define multisession_bit 0x08 258 #define cd_size_bit 0x04 259 #define subq_bit 0x02 260 #define frame_size_bit 0x01 261 262 /* 263 * disk states (bits of diskstate_flags): 264 */ 265 #define upc_valid (D_S[d].diskstate_flags&upc_bit) 266 #define volume_valid (D_S[d].diskstate_flags&volume_bit) 267 #define toc_valid (D_S[d].diskstate_flags&toc_bit) 268 #define cd_size_valid (D_S[d].diskstate_flags&cd_size_bit) 269 #define subq_valid (D_S[d].diskstate_flags&subq_bit) 270 #define frame_size_valid (D_S[d].diskstate_flags&frame_size_bit) 271 272 /* 273 * the status_bits variable 274 */ 275 #define p_success 0x100 276 #define p_door_closed 0x80 277 #define p_caddy_in 0x40 278 #define p_spinning 0x20 279 #define p_check 0x10 280 #define p_busy_new 0x08 281 #define p_door_locked 0x04 282 #define p_disk_ok 0x01 283 284 /* 285 * LCS-7260 special status result bits: 286 */ 287 #define p_lcs_door_locked 0x02 288 #define p_lcs_door_closed 0x01 /* probably disk_in */ 289 290 /* 291 * CR-52x special status result bits: 292 */ 293 #define p_caddin_old 0x40 294 #define p_success_old 0x08 295 #define p_busy_old 0x04 296 #define p_bit_1 0x02 /* hopefully unused now */ 297 298 /* 299 * "generation specific" defs of the status result bits: 300 */ 301 #define p0_door_closed 0x80 302 #define p0_caddy_in 0x40 303 #define p0_spinning 0x20 304 #define p0_check 0x10 305 #define p0_success 0x08 /* unused */ 306 #define p0_busy 0x04 307 #define p0_bit_1 0x02 /* unused */ 308 #define p0_disk_ok 0x01 309 310 #define pL_disk_in 0x40 311 #define pL_spinning 0x20 312 #define pL_check 0x10 313 #define pL_success 0x08 /* unused ?? */ 314 #define pL_busy 0x04 315 #define pL_door_locked 0x02 316 #define pL_door_closed 0x01 317 318 #define pV_door_closed 0x40 319 #define pV_spinning 0x20 320 #define pV_check 0x10 321 #define pV_success 0x08 322 #define pV_busy 0x04 323 #define pV_door_locked 0x02 324 #define pV_disk_ok 0x01 325 326 #define p1_door_closed 0x80 327 #define p1_disk_in 0x40 328 #define p1_spinning 0x20 329 #define p1_check 0x10 330 #define p1_busy 0x08 331 #define p1_door_locked 0x04 332 #define p1_bit_1 0x02 /* unused */ 333 #define p1_disk_ok 0x01 334 335 #define p2_disk_ok 0x80 336 #define p2_door_locked 0x40 337 #define p2_spinning 0x20 338 #define p2_busy2 0x10 339 #define p2_busy1 0x08 340 #define p2_door_closed 0x04 341 #define p2_disk_in 0x02 342 #define p2_check 0x01 343 344 /* 345 * used drive states: 346 */ 347 #define st_door_closed (D_S[d].status_bits&p_door_closed) 348 #define st_caddy_in (D_S[d].status_bits&p_caddy_in) 349 #define st_spinning (D_S[d].status_bits&p_spinning) 350 #define st_check (D_S[d].status_bits&p_check) 351 #define st_busy (D_S[d].status_bits&p_busy_new) 352 #define st_door_locked (D_S[d].status_bits&p_door_locked) 353 #define st_diskok (D_S[d].status_bits&p_disk_ok) 354 355 /* 356 * bits of the CDi_status register: 357 */ 358 #define s_not_result_ready 0x04 /* 0: "result ready" */ 359 #define s_not_data_ready 0x02 /* 0: "data ready" */ 360 #define s_attention 0x01 /* 1: "attention required" */ 361 /* 362 * usable as: 363 */ 364 #define DRV_ATTN ((inb(CDi_status)&s_attention)!=0) 365 #define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0) 366 #define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0) 367 368 /* 369 * drive families and types (firmware versions): 370 */ 371 #define drv_fam0 0x0100 /* CR-52x family */ 372 #define drv_199 (drv_fam0+0x01) /* <200 */ 373 #define drv_200 (drv_fam0+0x02) /* <201 */ 374 #define drv_201 (drv_fam0+0x03) /* <210 */ 375 #define drv_210 (drv_fam0+0x04) /* <211 */ 376 #define drv_211 (drv_fam0+0x05) /* <300 */ 377 #define drv_300 (drv_fam0+0x06) /* >=300 */ 378 379 #define drv_fam1 0x0200 /* CR-56x family */ 380 #define drv_099 (drv_fam1+0x01) /* <100 */ 381 #define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */ 382 383 #define drv_fam2 0x0400 /* CD200 family */ 384 385 #define drv_famT 0x0800 /* TEAC CD-55A */ 386 387 #define drv_famL 0x1000 /* Longshine family */ 388 #define drv_260 (drv_famL+0x01) /* LCS-7260 */ 389 #define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */ 390 #define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */ 391 392 #define drv_famV 0x2000 /* ECS-AT (vertos-100) family */ 393 #define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */ 394 395 #define fam0_drive (D_S[d].drv_type&drv_fam0) 396 #define famL_drive (D_S[d].drv_type&drv_famL) 397 #define famV_drive (D_S[d].drv_type&drv_famV) 398 #define fam1_drive (D_S[d].drv_type&drv_fam1) 399 #define fam2_drive (D_S[d].drv_type&drv_fam2) 400 #define famT_drive (D_S[d].drv_type&drv_famT) 401 #define fam0L_drive (D_S[d].drv_type&(drv_fam0|drv_famL)) 402 #define fam0V_drive (D_S[d].drv_type&(drv_fam0|drv_famV)) 403 #define famLV_drive (D_S[d].drv_type&(drv_famL|drv_famV)) 404 #define fam0LV_drive (D_S[d].drv_type&(drv_fam0|drv_famL|drv_famV)) 405 #define fam1L_drive (D_S[d].drv_type&(drv_fam1|drv_famL)) 406 #define fam1V_drive (D_S[d].drv_type&(drv_fam1|drv_famV)) 407 #define fam1LV_drive (D_S[d].drv_type&(drv_fam1|drv_famL|drv_famV)) 408 #define fam01_drive (D_S[d].drv_type&(drv_fam0|drv_fam1)) 409 #define fam12_drive (D_S[d].drv_type&(drv_fam1|drv_fam2)) 410 #define fam2T_drive (D_S[d].drv_type&(drv_fam2|drv_famT)) 411 412 /* 413 * audio states: 414 */ 415 #define audio_completed 3 /* Forgot this one! --AJK */ 416 #define audio_playing 2 417 #define audio_pausing 1 418 419 /* 420 * drv_pattern, drv_options: 421 */ 422 #define speed_auto 0x80 423 #define speed_300 0x40 424 #define speed_150 0x20 425 #define audio_mono 0x04 426 427 /* 428 * values of cmd_type (0 else): 429 */ 430 #define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */ 431 #define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */ 432 #define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */ 433 #define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */ 434 435 /* 436 * sense_byte: 437 * 438 * values: 00 439 * 01 440 * 81 441 * 82 "raw audio" mode 442 * xx from infobuf[0] after 85 00 00 00 00 00 00 443 */ 444 445 /* audio status (bin) */ 446 #define aud_00 0x00 /* Audio status byte not supported or not valid */ 447 #define audx11 0x0b /* Audio play operation in progress */ 448 #define audx12 0x0c /* Audio play operation paused */ 449 #define audx13 0x0d /* Audio play operation successfully completed */ 450 #define audx14 0x0e /* Audio play operation stopped due to error */ 451 #define audx15 0x0f /* No current audio status to return */ 452 /* audio status (bcd) */ 453 #define aud_11 0x11 /* Audio play operation in progress */ 454 #define aud_12 0x12 /* Audio play operation paused */ 455 #define aud_13 0x13 /* Audio play operation successfully completed */ 456 #define aud_14 0x14 /* Audio play operation stopped due to error */ 457 #define aud_15 0x15 /* No current audio status to return */ 458 459 /* 460 * highest allowed drive number (MINOR+1) 461 */ 462 #define NR_SBPCD 4 463 464 /* 465 * we try to never disable interrupts - seems to work 466 */ 467 #define SBPCD_DIS_IRQ 0 468 469 /* 470 * "write byte to port" 471 */ 472 #define OUT(x,y) outb(y,x) 473 474 /*==========================================================================*/ 475 476 #define MIXER_addr SOUND_BASE+4 /* sound card's address register */ 477 #define MIXER_data SOUND_BASE+5 /* sound card's data register */ 478 #define MIXER_CD_Volume 0x28 /* internal SB Pro register address */ 479 480 /*==========================================================================*/ 481 482 #define MAX_TRACKS 99 483 484 #define ERR_DISKCHANGE 615 485 486 /*==========================================================================*/ 487 /* 488 * To make conversions easier (machine dependent!) 489 */ 490 typedef union _msf 491 { 492 u_int n; 493 u_char c[4]; 494 } MSF; 495 496 typedef union _blk 497 { 498 u_int n; 499 u_char c[4]; 500 } BLK; 501 502 /*==========================================================================*/ 503 504 /*============================================================================ 505 ============================================================================== 506 507 COMMAND SET of "old" drives like CR-521, CR-522 508 (the CR-562 family is different): 509 510 No. Command Code 511 -------------------------------------------- 512 513 Drive Commands: 514 1 Seek 01 515 2 Read Data 02 516 3 Read XA-Data 03 517 4 Read Header 04 518 5 Spin Up 05 519 6 Spin Down 06 520 7 Diagnostic 07 521 8 Read UPC 08 522 9 Read ISRC 09 523 10 Play Audio 0A 524 11 Play Audio MSF 0B 525 12 Play Audio Track/Index 0C 526 527 Status Commands: 528 13 Read Status 81 529 14 Read Error 82 530 15 Read Drive Version 83 531 16 Mode Select 84 532 17 Mode Sense 85 533 18 Set XA Parameter 86 534 19 Read XA Parameter 87 535 20 Read Capacity 88 536 21 Read SUB_Q 89 537 22 Read Disc Code 8A 538 23 Read Disc Information 8B 539 24 Read TOC 8C 540 25 Pause/Resume 8D 541 26 Read Packet 8E 542 27 Read Path Check 00 543 544 545 all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first 546 547 mnemo 7-byte command #bytes response (r0...rn) 548 ________ ____________________ ____ 549 550 Read Status: 551 status: 81. (1) one-byte command, gives the main 552 status byte 553 Read Error: 554 check1: 82 00 00 00 00 00 00. (6) r1: audio status 555 556 Read Packet: 557 check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating 558 to commands 01 04 05 07 08 09 559 560 Play Audio: 561 play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba), 562 nn-nn-nn: #blocks 563 Play Audio MSF: 564 0b mm-ss-ff mm-ss-ff (0) play audio from/to 565 566 Play Audio Track/Index: 567 0c ... 568 569 Pause/Resume: 570 pause: 8d pr 00 00 00 00 00. (0) pause (pr=00) 571 resume (pr=80) audio playing 572 573 Mode Select: 574 84 00 nn-nn ??.?? 00 (0) nn-nn: 2048 or 2340 575 possibly defines transfer size 576 577 set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1) 578 le(vel): min=0, max=FF, else half 579 (firmware 2.11) 580 581 Mode Sense: 582 get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting 583 584 Read Disc Information: 585 tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format) 586 587 Read TOC: 588 tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn 589 (fl=0:"lba"-, =2:"msf-bin"-format) 590 591 Read Capacity: 592 capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity" 593 594 595 Read Path Check: 596 ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55 597 ("ping" if the drive is connected) 598 599 Read Drive Version: 600 ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn" 601 (n.nn = 2.01, 2.11., 3.00, ...) 602 603 Seek: 604 seek: 01 00 ll-bb-aa 00 00. (0) 605 seek: 01 02 mm-ss-ff 00 00. (0) 606 607 Read Data: 608 read: 02 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2048 bytes, 609 starting at block xx-xx-xx 610 fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx 611 612 Read XA-Data: 613 read: 03 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2340 bytes, 614 starting at block xx-xx-xx 615 fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx 616 617 Read SUB_Q: 618 89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf, 619 fl=0: "lba", fl=2: "msf" 620 621 Read Disc Code: 622 8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info 623 624 Read Header: 625 04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2" 626 04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2" 627 628 Spin Up: 629 05 00 ll-bb-aa 00 00. (0) possibly implies a "seek" 630 631 Spin Down: 632 06 ... 633 634 Diagnostic: 635 07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2" 636 07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2" 637 638 Read UPC: 639 08 00 ll-bb-aa 00 00. (16) 640 08 02 mm-ss-ff 00 00. (16) 641 642 Read ISRC: 643 09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2" 644 09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2" 645 646 Set XA Parameter: 647 86 ... 648 649 Read XA Parameter: 650 87 ... 651 652 ============================================================================== 653 ============================================================================*/ 654 655 /* 656 * commands 657 * 658 * CR-52x: CMD0_ 659 * CR-56x: CMD1_ 660 * CD200: CMD2_ 661 * LCS-7260: CMDL_ 662 * TEAC CD-55A: CMDT_ 663 * ECS-AT: CMDV_ 664 */ 665 #define CMD1_RESET 0x0a 666 #define CMD2_RESET 0x01 667 #define CMDT_RESET 0xc0 668 669 #define CMD1_LOCK_CTL 0x0c 670 #define CMD2_LOCK_CTL 0x1e 671 #define CMDT_LOCK_CTL CMD2_LOCK_CTL 672 #define CMDL_LOCK_CTL 0x0e 673 #define CMDV_LOCK_CTL CMDL_LOCK_CTL 674 675 #define CMD1_TRAY_CTL 0x07 676 #define CMD2_TRAY_CTL 0x1b 677 #define CMDT_TRAY_CTL CMD2_TRAY_CTL 678 #define CMDL_TRAY_CTL 0x0d 679 #define CMDV_TRAY_CTL CMDL_TRAY_CTL 680 681 #define CMD1_MULTISESS 0x8d 682 #define CMDL_MULTISESS 0x8c 683 #define CMDV_MULTISESS CMDL_MULTISESS 684 685 #define CMD1_SUBCHANINF 0x11 686 #define CMD2_SUBCHANINF 0x?? 687 688 #define CMD1_ABORT 0x08 689 #define CMD2_ABORT 0x08 690 #define CMDT_ABORT 0x08 691 692 #define CMD2_x02 0x02 693 694 #define CMD2_SETSPEED 0xda 695 696 #define CMD0_PATH_CHECK 0x00 697 #define CMD1_PATH_CHECK 0x??? 698 #define CMD2_PATH_CHECK 0x??? 699 #define CMDT_PATH_CHECK 0x??? 700 #define CMDL_PATH_CHECK CMD0_PATH_CHECK 701 #define CMDV_PATH_CHECK CMD0_PATH_CHECK 702 703 #define CMD0_SEEK 0x01 704 #define CMD1_SEEK CMD0_SEEK 705 #define CMD2_SEEK 0x2b 706 #define CMDT_SEEK CMD2_SEEK 707 #define CMDL_SEEK CMD0_SEEK 708 #define CMDV_SEEK CMD0_SEEK 709 710 #define CMD0_READ 0x02 711 #define CMD1_READ 0x10 712 #define CMD2_READ 0x28 713 #define CMDT_READ CMD2_READ 714 #define CMDL_READ CMD0_READ 715 #define CMDV_READ CMD0_READ 716 717 #define CMD0_READ_XA 0x03 718 #define CMD2_READ_XA 0xd4 719 #define CMD2_READ_XA2 0xd5 720 #define CMDL_READ_XA CMD0_READ_XA /* really ?? */ 721 #define CMDV_READ_XA CMD0_READ_XA 722 723 #define CMD0_READ_HEAD 0x04 724 725 #define CMD0_SPINUP 0x05 726 #define CMD1_SPINUP 0x02 727 #define CMD2_SPINUP CMD2_TRAY_CTL 728 #define CMDL_SPINUP CMD0_SPINUP 729 #define CMDV_SPINUP CMD0_SPINUP 730 731 #define CMD0_SPINDOWN 0x06 /* really??? */ 732 #define CMD1_SPINDOWN 0x06 733 #define CMD2_SPINDOWN CMD2_TRAY_CTL 734 #define CMDL_SPINDOWN 0x0d 735 #define CMDV_SPINDOWN CMD0_SPINDOWN 736 737 #define CMD0_DIAG 0x07 738 739 #define CMD0_READ_UPC 0x08 740 #define CMD1_READ_UPC 0x88 741 #define CMD2_READ_UPC 0x??? 742 #define CMDL_READ_UPC CMD0_READ_UPC 743 #define CMDV_READ_UPC 0x8f 744 745 #define CMD0_READ_ISRC 0x09 746 747 #define CMD0_PLAY 0x0a 748 #define CMD1_PLAY 0x??? 749 #define CMD2_PLAY 0x??? 750 #define CMDL_PLAY CMD0_PLAY 751 #define CMDV_PLAY CMD0_PLAY 752 753 #define CMD0_PLAY_MSF 0x0b 754 #define CMD1_PLAY_MSF 0x0e 755 #define CMD2_PLAY_MSF 0x47 756 #define CMDT_PLAY_MSF CMD2_PLAY_MSF 757 #define CMDL_PLAY_MSF 0x??? 758 759 #define CMD0_PLAY_TI 0x0c 760 #define CMD1_PLAY_TI 0x0f 761 762 #define CMD0_STATUS 0x81 763 #define CMD1_STATUS 0x05 764 #define CMD2_STATUS 0x00 765 #define CMDT_STATUS CMD2_STATUS 766 #define CMDL_STATUS CMD0_STATUS 767 #define CMDV_STATUS CMD0_STATUS 768 #define CMD2_SEEK_LEADIN 0x00 769 770 #define CMD0_READ_ERR 0x82 771 #define CMD1_READ_ERR CMD0_READ_ERR 772 #define CMD2_READ_ERR 0x03 773 #define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */ 774 #define CMDL_READ_ERR CMD0_READ_ERR 775 #define CMDV_READ_ERR CMD0_READ_ERR 776 777 #define CMD0_READ_VER 0x83 778 #define CMD1_READ_VER CMD0_READ_VER 779 #define CMD2_READ_VER 0x12 780 #define CMDT_READ_VER CMD2_READ_VER /* really ?? */ 781 #define CMDL_READ_VER CMD0_READ_VER 782 #define CMDV_READ_VER CMD0_READ_VER 783 784 #define CMD0_SETMODE 0x84 785 #define CMD1_SETMODE 0x09 786 #define CMD2_SETMODE 0x55 787 #define CMDT_SETMODE CMD2_SETMODE 788 #define CMDL_SETMODE CMD0_SETMODE 789 790 #define CMD0_GETMODE 0x85 791 #define CMD1_GETMODE 0x84 792 #define CMD2_GETMODE 0x5a 793 #define CMDT_GETMODE CMD2_GETMODE 794 #define CMDL_GETMODE CMD0_GETMODE 795 796 #define CMD0_SET_XA 0x86 797 798 #define CMD0_GET_XA 0x87 799 800 #define CMD0_CAPACITY 0x88 801 #define CMD1_CAPACITY 0x85 802 #define CMD2_CAPACITY 0x25 803 #define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */ 804 805 #define CMD0_READSUBQ 0x89 806 #define CMD1_READSUBQ 0x87 807 #define CMD2_READSUBQ 0x42 808 #define CMDT_READSUBQ CMD2_READSUBQ 809 #define CMDL_READSUBQ CMD0_READSUBQ 810 #define CMDV_READSUBQ CMD0_READSUBQ 811 812 #define CMD0_DISKCODE 0x8a 813 814 #define CMD0_DISKINFO 0x8b 815 #define CMD1_DISKINFO CMD0_DISKINFO 816 #define CMD2_DISKINFO 0x43 817 #define CMDT_DISKINFO CMD2_DISKINFO 818 #define CMDL_DISKINFO CMD0_DISKINFO 819 #define CMDV_DISKINFO CMD0_DISKINFO 820 821 #define CMD0_READTOC 0x8c 822 #define CMD1_READTOC CMD0_READTOC 823 #define CMD2_READTOC 0x??? 824 #define CMDL_READTOC CMD0_READTOC 825 #define CMDV_READTOC CMD0_READTOC 826 827 #define CMD0_PAU_RES 0x8d 828 #define CMD1_PAU_RES 0x0d 829 #define CMD2_PAU_RES 0x4b 830 #define CMDT_PAUSE CMD2_PAU_RES 831 #define CMDL_PAU_RES CMD0_PAU_RES 832 #define CMDV_PAUSE CMD0_PAU_RES 833 834 #define CMD0_PACKET 0x8e 835 #define CMD1_PACKET CMD0_PACKET 836 #define CMD2_PACKET 0x??? 837 #define CMDL_PACKET CMD0_PACKET 838 #define CMDV_PACKET 0x??? 839 840 /*==========================================================================*/ 841 /*==========================================================================*/ 842 #endif /* _LINUX_SBPCD_H */ 843 /*==========================================================================*/ 844 /* 845 * Overrides for Emacs so that we follow Linus's tabbing style. 846 * Emacs will notice this stuff at the end of the file and automatically 847 * adjust the settings for this buffer only. This must remain at the end 848 * of the file. 849 * --------------------------------------------------------------------------- 850 * Local variables: 851 * c-indent-level: 8 852 * c-brace-imaginary-offset: 0 853 * c-brace-offset: -8 854 * c-argdecl-indent: 8 855 * c-label-offset: -8 856 * c-continued-statement-offset: 8 857 * c-continued-brace-offset: 0 858 * End: 859 */ 860