1VERSION = 1 2PATCHLEVEL = 35 3SUBLEVEL = 0 4EXTRAVERSION = 5NAME = Unnamed 6 7# *DOCUMENTATION* 8# To see a list of typical targets execute "make help" 9# More info can be located in ./README 10# Comments in this file are targeted only to the developer, do not 11# expect to learn how to build the kernel reading this file. 12 13# Do not print "Entering directory ..." 14MAKEFLAGS += --no-print-directory 15 16# We are using a recursive build, so we need to do a little thinking 17# to get the ordering right. 18# 19# Most importantly: sub-Makefiles should only ever modify files in 20# their own directory. If in some directory we have a dependency on 21# a file in another dir (which doesn't happen often, but it's often 22# unavoidable when linking the built-in.o targets which finally 23# turn into busybox), we will call a sub make in that other dir, and 24# after that we are sure that everything which is in that other dir 25# is now up to date. 26# 27# The only cases where we need to modify files which have global 28# effects are thus separated out and done before the recursive 29# descending is started. They are now explicitly listed as the 30# prepare rule. 31 32# To put more focus on warnings, be less verbose as default 33# Use 'make V=1' to see the full commands 34 35ifdef V 36 ifeq ("$(origin V)", "command line") 37 KBUILD_VERBOSE = $(V) 38 endif 39endif 40ifndef KBUILD_VERBOSE 41 KBUILD_VERBOSE = 0 42endif 43 44# Call sparse as part of compilation of C files 45# Use 'make C=1' to enable sparse checking 46 47ifdef C 48 ifeq ("$(origin C)", "command line") 49 KBUILD_CHECKSRC = $(C) 50 endif 51endif 52ifndef KBUILD_CHECKSRC 53 KBUILD_CHECKSRC = 0 54endif 55 56# Use make M=dir to specify directory of external module to build 57# Old syntax make ... SUBDIRS=$PWD is still supported 58# Setting the environment variable KBUILD_EXTMOD take precedence 59ifdef SUBDIRS 60 KBUILD_EXTMOD ?= $(SUBDIRS) 61endif 62ifdef M 63 ifeq ("$(origin M)", "command line") 64 KBUILD_EXTMOD := $(M) 65 endif 66endif 67 68 69# kbuild supports saving output files in a separate directory. 70# To locate output files in a separate directory two syntaxes are supported. 71# In both cases the working directory must be the root of the kernel src. 72# 1) O= 73# Use "make O=dir/to/store/output/files/" 74# 75# 2) Set KBUILD_OUTPUT 76# Set the environment variable KBUILD_OUTPUT to point to the directory 77# where the output files shall be placed. 78# export KBUILD_OUTPUT=dir/to/store/output/files/ 79# make 80# 81# The O= assignment takes precedence over the KBUILD_OUTPUT environment 82# variable. 83 84 85# KBUILD_SRC is set on invocation of make in OBJ directory 86# KBUILD_SRC is not intended to be used by the regular user (for now) 87ifeq ($(KBUILD_SRC),) 88 89# OK, Make called in directory where kernel src resides 90# Do we want to locate output files in a separate directory? 91ifdef O 92 ifeq ("$(origin O)", "command line") 93 KBUILD_OUTPUT := $(O) 94 endif 95endif 96 97# That's our default target when none is given on the command line 98PHONY := _all 99_all: 100 101ifneq ($(KBUILD_OUTPUT),) 102# Invoke a second make in the output directory, passing relevant variables 103# check that the output directory actually exists 104saved-output := $(KBUILD_OUTPUT) 105KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd) 106$(if $(KBUILD_OUTPUT),, \ 107 $(error output directory "$(saved-output)" does not exist)) 108 109PHONY += $(MAKECMDGOALS) 110 111$(filter-out _all,$(MAKECMDGOALS)) _all: 112 $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ 113 KBUILD_SRC=$(CURDIR) \ 114 KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@ 115 116# Leave processing to above invocation of make 117skip-makefile := 1 118endif # ifneq ($(KBUILD_OUTPUT),) 119endif # ifeq ($(KBUILD_SRC),) 120 121# We process the rest of the Makefile if this is the final invocation of make 122ifeq ($(skip-makefile),) 123 124# If building an external module we do not care about the all: rule 125# but instead _all depend on modules 126PHONY += all 127ifeq ($(KBUILD_EXTMOD),) 128_all: all 129else 130_all: modules 131endif 132 133srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) 134TOPDIR := $(srctree) 135# FIXME - TOPDIR is obsolete, use srctree/objtree 136objtree := $(CURDIR) 137src := $(srctree) 138obj := $(objtree) 139 140VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) 141 142export srctree objtree VPATH TOPDIR 143 144 145# Cross compiling and selecting different set of gcc/bin-utils 146# --------------------------------------------------------------------------- 147# 148# When performing cross compilation for other architectures ARCH shall be set 149# to the target architecture. (See arch/* for the possibilities). 150# ARCH can be set during invocation of make: 151# make ARCH=ia64 152# Another way is to have ARCH set in the environment. 153# The default ARCH is the host where make is executed. 154 155# CROSS_COMPILE specify the prefix used for all executables used 156# during compilation. Only gcc and related bin-utils executables 157# are prefixed with $(CROSS_COMPILE). 158# CROSS_COMPILE can be set on the command line 159# make CROSS_COMPILE=ia64-linux- 160# Alternatively CROSS_COMPILE can be set in the environment. 161# Default value for CROSS_COMPILE is not to prefix executables 162# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile 163 164CROSS_COMPILE ?= 165# bbox: we may have CONFIG_CROSS_COMPILER_PREFIX in .config, 166# and it has not been included yet... thus using an awkward syntax. 167ifeq ($(CROSS_COMPILE),) 168CROSS_COMPILE := $(shell grep ^CONFIG_CROSS_COMPILER_PREFIX .config 2>/dev/null) 169CROSS_COMPILE := $(subst CONFIG_CROSS_COMPILER_PREFIX=,,$(CROSS_COMPILE)) 170CROSS_COMPILE := $(subst ",,$(CROSS_COMPILE)) 171#") 172endif 173 174# SUBARCH tells the usermode build what the underlying arch is. That is set 175# first, and if a usermode build is happening, the "ARCH=um" on the command 176# line overrides the setting of ARCH below. If a native build is happening, 177# then ARCH is assigned, getting whatever value it gets normally, and 178# SUBARCH is subsequently ignored. 179 180ifneq ($(CROSS_COMPILE),) 181SUBARCH := $(shell echo $(CROSS_COMPILE) | cut -d- -f1 | sed 's:^.*/::g') 182else 183SUBARCH := $(shell uname -m) 184endif 185SUBARCH := $(shell echo $(SUBARCH) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ 186 -e s/arm.*/arm/ -e s/sa110/arm/ \ 187 -e s/s390x/s390/ -e s/parisc64/parisc/ \ 188 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ ) 189 190ARCH ?= $(SUBARCH) 191 192# Architecture as present in compile.h 193UTS_MACHINE := $(ARCH) 194 195# SHELL used by kbuild 196CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 197 else if [ -x /bin/bash ]; then echo /bin/bash; \ 198 else echo sh; fi ; fi) 199 200# Decide whether to build built-in, modular, or both. 201# Normally, just do built-in. 202 203KBUILD_MODULES := 204KBUILD_BUILTIN := 1 205 206# If we have only "make modules", don't compile built-in objects. 207# When we're building modules with modversions, we need to consider 208# the built-in objects during the descend as well, in order to 209# make sure the checksums are uptodate before we record them. 210 211ifeq ($(MAKECMDGOALS),modules) 212 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) 213endif 214 215# If we have "make <whatever> modules", compile modules 216# in addition to whatever we do anyway. 217# Just "make" or "make all" shall build modules as well 218 219ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) 220 KBUILD_MODULES := 1 221endif 222 223ifeq ($(MAKECMDGOALS),) 224 KBUILD_MODULES := 1 225endif 226 227export KBUILD_MODULES KBUILD_BUILTIN 228export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD 229 230# Beautify output 231# --------------------------------------------------------------------------- 232# 233# Normally, we echo the whole command before executing it. By making 234# that echo $($(quiet)$(cmd)), we now have the possibility to set 235# $(quiet) to choose other forms of output instead, e.g. 236# 237# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 238# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 239# 240# If $(quiet) is empty, the whole command will be printed. 241# If it is set to "quiet_", only the short version will be printed. 242# If it is set to "silent_", nothing wil be printed at all, since 243# the variable $(silent_cmd_cc_o_c) doesn't exist. 244# 245# A simple variant is to prefix commands with $(Q) - that's useful 246# for commands that shall be hidden in non-verbose mode. 247# 248# $(Q)ln $@ :< 249# 250# If KBUILD_VERBOSE equals 0 then the above command will be hidden. 251# If KBUILD_VERBOSE equals 1 then the above command is displayed. 252 253ifeq ($(KBUILD_VERBOSE),1) 254 quiet = 255 Q = 256else 257 quiet=quiet_ 258 Q = @ 259endif 260 261# If the user is running make -s (silent mode), suppress echoing of 262# commands 263 264ifneq ($(findstring s,$(MAKEFLAGS)),) 265 quiet=silent_ 266endif 267 268export quiet Q KBUILD_VERBOSE 269 270 271# Look for make include files relative to root of kernel src 272MAKEFLAGS += --include-dir=$(srctree) 273 274HOSTCC = gcc 275HOSTCXX = g++ 276HOSTCFLAGS := 277HOSTCXXFLAGS := 278# We need some generic definitions 279include $(srctree)/scripts/Kbuild.include 280 281HOSTCFLAGS += $(call hostcc-option,-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer,) 282HOSTCXXFLAGS += -O2 283 284# For maximum performance (+ possibly random breakage, uncomment 285# the following) 286 287MAKEFLAGS += -rR 288 289# Make variables (CC, etc...) 290 291AS = $(CROSS_COMPILE)as 292CC = $(CROSS_COMPILE)gcc 293LD = $(CC) -nostdlib 294CPP = $(CC) -E 295AR = $(CROSS_COMPILE)ar 296NM = $(CROSS_COMPILE)nm 297STRIP = $(CROSS_COMPILE)strip 298OBJCOPY = $(CROSS_COMPILE)objcopy 299OBJDUMP = $(CROSS_COMPILE)objdump 300PKG_CONFIG ?= $(CROSS_COMPILE)pkg-config 301AWK = awk 302GENKSYMS = scripts/genksyms/genksyms 303DEPMOD = /sbin/depmod 304KALLSYMS = scripts/kallsyms 305PERL = perl 306CHECK = sparse 307 308CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF) 309MODFLAGS = -DMODULE 310CFLAGS_MODULE = $(MODFLAGS) 311AFLAGS_MODULE = $(MODFLAGS) 312LDFLAGS_MODULE = -r 313CFLAGS_KERNEL = 314AFLAGS_KERNEL = 315 316 317# Use LINUXINCLUDE when you must reference the include/ directory. 318# Needed to be compatible with the O= option 319CFLAGS := $(CFLAGS) 320# Added only to final link stage of busybox binary 321CFLAGS_busybox := $(CFLAGS_busybox) 322CPPFLAGS := $(CPPFLAGS) 323AFLAGS := $(AFLAGS) 324LDFLAGS := $(LDFLAGS) 325LDLIBS := 326 327# Read KERNELRELEASE from .kernelrelease (if it exists) 328KERNELRELEASE = $(shell cat .kernelrelease 2> /dev/null) 329KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) 330 331export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION \ 332 ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \ 333 CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \ 334 HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS 335 336export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS 337export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE 338export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE 339export FLTFLAGS 340 341# When compiling out-of-tree modules, put MODVERDIR in the module 342# tree rather than in the kernel tree. The kernel tree might 343# even be read-only. 344export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions 345 346# Files to ignore in find ... statements 347 348RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o 349export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git 350 351# =========================================================================== 352# Rules shared between *config targets and build targets 353 354# Basic helpers built in scripts/ 355PHONY += scripts_basic 356scripts_basic: 357 $(Q)$(MAKE) $(build)=scripts/basic 358 359# To avoid any implicit rule to kick in, define an empty command. 360scripts/basic/%: scripts_basic ; 361 362# This target generates Kbuild's and Config.in's from *.c files 363PHONY += gen_build_files 364gen_build_files: $(wildcard $(srctree)/*/*.c) $(wildcard $(srctree)/*/*/*.c) $(wildcard $(srctree)/embed/*) 365 $(Q)$(srctree)/scripts/gen_build_files.sh $(srctree) $(objtree) 366 367# bbox: we have helpers in applets/ 368# we depend on scripts_basic, since scripts/basic/fixdep 369# must be built before any other host prog 370PHONY += applets_dir 371applets_dir: scripts_basic gen_build_files include/config/MARKER 372 $(Q)$(MAKE) $(build)=applets 373 374applets/%: applets_dir ; 375 376PHONY += outputmakefile 377# outputmakefile generates a Makefile in the output directory, if using a 378# separate output directory. This allows convenient use of make in the 379# output directory. 380outputmakefile: 381ifneq ($(KBUILD_SRC),) 382 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ 383 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) 384endif 385 386# To make sure we do not include .config for any of the *config targets 387# catch them early, and hand them over to scripts/kconfig/Makefile 388# It is allowed to specify more targets when calling make, including 389# mixing *config targets and build targets. 390# For example 'make oldconfig all'. 391# Detect when mixed targets is specified, and make a second invocation 392# of make so .config is not included in this case either (for *config). 393 394no-dot-config-targets := clean mrproper distclean \ 395 cscope TAGS tags help %docs 396#bbox# check% is removed from above 397 398config-targets := 0 399mixed-targets := 0 400dot-config := 1 401 402ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 403 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 404 dot-config := 0 405 endif 406endif 407 408ifeq ($(KBUILD_EXTMOD),) 409 ifneq ($(filter config %config,$(MAKECMDGOALS)),) 410 config-targets := 1 411 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) 412 mixed-targets := 1 413 endif 414 endif 415endif 416 417ifeq ($(mixed-targets),1) 418# =========================================================================== 419# We're called with mixed targets (*config and build targets). 420# Handle them one by one. 421 422%:: FORCE 423 $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@ 424 425else 426ifeq ($(config-targets),1) 427# =========================================================================== 428# *config targets only - make sure prerequisites are updated, and descend 429# in scripts/kconfig to make the *config target 430 431# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. 432# KBUILD_DEFCONFIG may point out an alternative default configuration 433# used for 'make defconfig' 434-include $(srctree)/arch/$(ARCH)/Makefile 435export KBUILD_DEFCONFIG 436 437config: scripts_basic outputmakefile gen_build_files FORCE 438 $(Q)mkdir -p include 439 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 440 $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease 441 442%config: scripts_basic outputmakefile gen_build_files FORCE 443 $(Q)mkdir -p include 444 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 445 $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease 446 447else 448# =========================================================================== 449# Build targets only - this includes busybox, arch specific targets, clean 450# targets and others. In general all targets except *config targets. 451 452ifeq ($(KBUILD_EXTMOD),) 453# Additional helpers built in scripts/ 454# Carefully list dependencies so we do not try to build scripts twice 455# in parallel 456PHONY += scripts 457scripts: gen_build_files scripts_basic include/config/MARKER 458 $(Q)$(MAKE) $(build)=$(@) 459 460scripts_basic: include/autoconf.h 461 462# Objects we will link into busybox / subdirs we need to visit 463core-y := \ 464 applets/ \ 465 466libs-y := \ 467 archival/ \ 468 archival/libarchive/ \ 469 console-tools/ \ 470 coreutils/ \ 471 coreutils/libcoreutils/ \ 472 debianutils/ \ 473 klibc-utils/ \ 474 e2fsprogs/ \ 475 editors/ \ 476 findutils/ \ 477 init/ \ 478 libbb/ \ 479 libpwdgrp/ \ 480 loginutils/ \ 481 mailutils/ \ 482 miscutils/ \ 483 modutils/ \ 484 networking/ \ 485 networking/libiproute/ \ 486 networking/udhcp/ \ 487 printutils/ \ 488 procps/ \ 489 runit/ \ 490 selinux/ \ 491 shell/ \ 492 sysklogd/ \ 493 util-linux/ \ 494 util-linux/volume_id/ \ 495 496endif # KBUILD_EXTMOD 497 498ifeq ($(dot-config),1) 499# In this section, we need .config 500 501# Read in dependencies to all Kconfig* files, make sure to run 502# oldconfig if changes are detected. 503-include .kconfig.d 504 505-include .config 506 507# If .config needs to be updated, it will be done via the dependency 508# that autoconf has on .config. 509# To avoid any implicit rule to kick in, define an empty command 510.config .kconfig.d: ; 511 512-include $(srctree)/arch/$(ARCH)/Makefile 513 514# Now we can define CFLAGS etc according to .config 515include $(srctree)/Makefile.flags 516 517# If .config is newer than include/autoconf.h, someone tinkered 518# with it and forgot to run make oldconfig. 519# If kconfig.d is missing then we are probarly in a cleaned tree so 520# we execute the config step to be sure to catch updated Kconfig files 521include/autoconf.h: .kconfig.d .config $(wildcard $(srctree)/*/*.c) $(wildcard $(srctree)/*/*/*.c) | gen_build_files 522 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig 523 524include/usage.h: gen_build_files 525 526else 527# Dummy target needed, because used as prerequisite 528include/autoconf.h: ; 529endif 530 531# The all: target is the default when no target is given on the 532# command line. 533# This allow a user to issue only 'make' to build a kernel including modules 534# Defaults busybox but it is usually overridden in the arch makefile 535all: busybox doc 536 537# arch Makefile may override CC so keep this after arch Makefile is included 538#bbox# NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) 539CHECKFLAGS += $(NOSTDINC_FLAGS) 540 541# Default kernel image to build when no specific target is given. 542# KBUILD_IMAGE may be overruled on the commandline or 543# set in the environment 544# Also any assignments in arch/$(ARCH)/Makefile take precedence over 545# this default value 546export KBUILD_IMAGE ?= busybox 547 548# 549# INSTALL_PATH specifies where to place the updated kernel and system map 550# images. Default is /boot, but you can set it to other values 551export INSTALL_PATH ?= /boot 552 553# 554# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory 555# relocations required by build roots. This is not defined in the 556# makefile but the argument can be passed to make if needed. 557# 558 559MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) 560export MODLIB 561 562 563ifeq ($(KBUILD_EXTMOD),) 564busybox-dirs := $(patsubst %/,%,$(filter %/, $(core-y) $(core-m) $(libs-y) $(libs-m))) 565 566busybox-alldirs := $(sort $(busybox-dirs) $(patsubst %/,%,$(filter %/, \ 567 $(core-n) $(core-) $(libs-n) $(libs-) \ 568 ))) 569 570core-y := $(patsubst %/, %/built-in.o, $(core-y)) 571libs-y1 := $(patsubst %/, %/lib.a, $(libs-y)) 572libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y)) 573libs-y := $(libs-y1) $(libs-y2) 574 575# Build busybox 576# --------------------------------------------------------------------------- 577# busybox is build from the objects selected by $(busybox-init) and 578# $(busybox-main). Most are built-in.o files from top-level directories 579# in the kernel tree, others are specified in arch/$(ARCH)Makefile. 580# Ordering when linking is important, and $(busybox-init) must be first. 581# 582# busybox 583# ^ 584# | 585# +-< $(busybox-init) 586# | +--< init/version.o + more 587# | 588# +--< $(busybox-main) 589# | +--< driver/built-in.o mm/built-in.o + more 590# | 591# +-< kallsyms.o (see description in CONFIG_KALLSYMS section) 592# 593# busybox version (uname -v) cannot be updated during normal 594# descending-into-subdirs phase since we do not yet know if we need to 595# update busybox. 596# Therefore this step is delayed until just before final link of busybox - 597# except in the kallsyms case where it is done just before adding the 598# symbols to the kernel. 599# 600# System.map is generated to document addresses of all kernel symbols 601 602busybox-all := $(core-y) $(libs-y) 603 604# Rule to link busybox - also used during CONFIG_KALLSYMS 605# May be overridden by arch/$(ARCH)/Makefile 606quiet_cmd_busybox__ ?= LINK $@ 607 cmd_busybox__ ?= $(srctree)/scripts/trylink \ 608 "$@" \ 609 "$(CC)" \ 610 "$(CFLAGS) $(CFLAGS_busybox)" \ 611 "$(LDFLAGS) $(EXTRA_LDFLAGS)" \ 612 "$(core-y)" \ 613 "$(libs-y)" \ 614 "$(LDLIBS)" \ 615 "$(CONFIG_EXTRA_LDLIBS)" \ 616 && $(srctree)/scripts/generate_BUFSIZ.sh --post include/common_bufsiz.h 617 618# Generate System.map 619quiet_cmd_sysmap = SYSMAP 620 cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap 621 622# Link of busybox 623# If CONFIG_KALLSYMS is set .version is already updated 624# Generate System.map and verify that the content is consistent 625# Use + in front of the busybox_version rule to silent warning with make -j2 626# First command is ':' to allow us to use + in front of the rule 627define rule_busybox__ 628 : 629 $(call cmd,busybox__) 630 $(Q)echo 'cmd_$@ := $(cmd_busybox__)' > $(@D)/.$(@F).cmd 631endef 632 633 634ifdef CONFIG_KALLSYMS 635# Generate section listing all symbols and add it into busybox $(kallsyms.o) 636# It's a three stage process: 637# o .tmp_busybox1 has all symbols and sections, but __kallsyms is 638# empty 639# Running kallsyms on that gives us .tmp_kallsyms1.o with 640# the right size - busybox version (uname -v) is updated during this step 641# o .tmp_busybox2 now has a __kallsyms section of the right size, 642# but due to the added section, some addresses have shifted. 643# From here, we generate a correct .tmp_kallsyms2.o 644# o The correct .tmp_kallsyms2.o is linked into the final busybox. 645# o Verify that the System.map from busybox matches the map from 646# .tmp_busybox2, just in case we did not generate kallsyms correctly. 647# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using 648# .tmp_busybox3 and .tmp_kallsyms3.o. This is only meant as a 649# temporary bypass to allow the kernel to be built while the 650# maintainers work out what went wrong with kallsyms. 651 652ifdef CONFIG_KALLSYMS_EXTRA_PASS 653last_kallsyms := 3 654else 655last_kallsyms := 2 656endif 657 658kallsyms.o := .tmp_kallsyms$(last_kallsyms).o 659 660define verify_kallsyms 661 $(Q)$(if $($(quiet)cmd_sysmap), \ 662 echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \ 663 $(cmd_sysmap) .tmp_busybox$(last_kallsyms) .tmp_System.map 664 $(Q)cmp -s System.map .tmp_System.map || \ 665 (echo Inconsistent kallsyms data; \ 666 echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \ 667 rm .tmp_kallsyms* ; /bin/false ) 668endef 669 670# Update busybox version before link 671# Use + in front of this rule to silent warning about make -j1 672# First command is ':' to allow us to use + in front of this rule 673cmd_ksym_ld = $(cmd_busybox__) 674define rule_ksym_ld 675 : 676 +$(call cmd,busybox_version) 677 $(call cmd,busybox__) 678 $(Q)echo 'cmd_$@ := $(cmd_busybox__)' > $(@D)/.$(@F).cmd 679endef 680 681# Generate .S file with all kernel symbols 682quiet_cmd_kallsyms = KSYM $@ 683 cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \ 684 $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@ 685 686.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE 687 $(call if_changed_dep,as_o_S) 688 689.tmp_kallsyms%.S: .tmp_busybox% $(KALLSYMS) 690 $(call cmd,kallsyms) 691 692# .tmp_busybox1 must be complete except kallsyms, so update busybox version 693.tmp_busybox1: $(busybox-lds) $(busybox-all) FORCE 694 $(call if_changed_rule,ksym_ld) 695 696.tmp_busybox2: $(busybox-lds) $(busybox-all) .tmp_kallsyms1.o FORCE 697 $(call if_changed,busybox__) 698 699.tmp_busybox3: $(busybox-lds) $(busybox-all) .tmp_kallsyms2.o FORCE 700 $(call if_changed,busybox__) 701 702# Needs to visit scripts/ before $(KALLSYMS) can be used. 703$(KALLSYMS): scripts ; 704 705# Generate some data for debugging strange kallsyms problems 706debug_kallsyms: .tmp_map$(last_kallsyms) 707 708.tmp_map%: .tmp_busybox% FORCE 709 ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@ 710 711.tmp_map3: .tmp_map2 712 713.tmp_map2: .tmp_map1 714 715endif # ifdef CONFIG_KALLSYMS 716 717# busybox image - including updated kernel symbols 718busybox_unstripped: $(busybox-all) FORCE 719 $(call if_changed_rule,busybox__) 720 $(Q)rm -f .old_version 721 722busybox: busybox_unstripped 723ifeq ($(SKIP_STRIP),y) 724 $(Q)cp $< $@ 725else 726 $(Q)$(STRIP) -s --remove-section=.note --remove-section=.comment \ 727 busybox_unstripped -o $@ 728# strip is confused by PIE executable and does not set exec bits 729 $(Q)chmod a+x $@ 730endif 731 732# The actual objects are generated when descending, 733# make sure no implicit rule kicks in 734$(sort $(busybox-all)): $(busybox-dirs) ; 735 736# Handle descending into subdirectories listed in $(busybox-dirs) 737# Preset locale variables to speed up the build process. Limit locale 738# tweaks to this spot to avoid wrong language settings when running 739# make menuconfig etc. 740# Error messages still appears in the original language 741 742PHONY += $(busybox-dirs) 743$(busybox-dirs): prepare scripts 744 $(Q)$(MAKE) $(build)=$@ 745 746# Build the kernel release string 747# The KERNELRELEASE is stored in a file named .kernelrelease 748# to be used when executing for example make install or make modules_install 749# 750# Take the contents of any files called localversion* and the config 751# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. 752# LOCALVERSION from the command line override all of this 753 754nullstring := 755space := $(nullstring) # end of line 756 757___localver = $(objtree)/localversion* $(srctree)/localversion* 758__localver = $(sort $(wildcard $(___localver))) 759# skip backup files (containing '~') 760_localver = $(foreach f, $(__localver), $(if $(findstring ~, $(f)),,$(f))) 761 762localver = $(subst $(space),, \ 763 $(shell cat /dev/null $(_localver)) \ 764 $(patsubst "%",%,$(CONFIG_LOCALVERSION))) 765 766# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called 767# and if the SCM is know a tag from the SCM is appended. 768# The appended tag is determinded by the SCM used. 769# 770# Currently, only git is supported. 771# Other SCMs can edit scripts/setlocalversion and add the appropriate 772# checks as needed. 773ifdef _BB_DISABLED_CONFIG_LOCALVERSION_AUTO 774 _localver-auto = $(shell $(CONFIG_SHELL) \ 775 $(srctree)/scripts/setlocalversion $(srctree)) 776 localver-auto = $(LOCALVERSION)$(_localver-auto) 777endif 778 779localver-full = $(localver)$(localver-auto) 780 781# Store (new) KERNELRELASE string in .kernelrelease 782kernelrelease = $(KERNELVERSION)$(localver-full) 783.kernelrelease: FORCE 784 $(Q)rm -f $@ 785 $(Q)echo $(kernelrelease) > $@ 786 787 788# Things we need to do before we recursively start building the kernel 789# or the modules are listed in "prepare". 790# A multi level approach is used. prepareN is processed before prepareN-1. 791# archprepare is used in arch Makefiles and when processed asm symlink, 792# version.h and scripts_basic is processed / created. 793 794# Listed in dependency order 795PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 796 797# prepare-all is deprecated, use prepare as valid replacement 798PHONY += prepare-all 799 800# prepare3 is used to check if we are building in a separate output directory, 801# and if so do: 802# 1) Check that make has not been executed in the kernel src $(srctree) 803# 2) Create the include2 directory, used for the second asm symlink 804prepare3: .kernelrelease 805ifneq ($(KBUILD_SRC),) 806 @echo ' Using $(srctree) as source for busybox' 807 $(Q)if [ -f $(srctree)/.config ]; then \ 808 echo " $(srctree) is not clean, please run 'make mrproper'";\ 809 echo " in the '$(srctree)' directory.";\ 810 /bin/false; \ 811 fi; 812 $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; 813 $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm 814endif 815 816# prepare2 creates a makefile if using a separate output directory 817prepare2: prepare3 outputmakefile 818 819prepare1: prepare2 include/config/MARKER 820ifneq ($(KBUILD_MODULES),) 821 $(Q)mkdir -p $(MODVERDIR) 822 $(Q)rm -f $(MODVERDIR)/* 823endif 824 825archprepare: prepare1 scripts_basic applets_dir 826 827prepare0: archprepare FORCE 828 $(Q)$(MAKE) $(build)=. 829 830# All the preparing.. 831prepare prepare-all: prepare0 832 833# Leave this as default for preprocessing busybox.lds.S, which is now 834# done in arch/$(ARCH)/kernel/Makefile 835 836export CPPFLAGS_busybox.lds += -P -C -U$(ARCH) 837 838# FIXME: The asm symlink changes when $(ARCH) changes. That's 839# hard to detect, but I suppose "make mrproper" is a good idea 840# before switching between archs anyway. 841 842#bbox# include/asm: 843#bbox# @echo ' SYMLINK $@ -> include/asm-$(ARCH)' 844#bbox# $(Q)if [ ! -d include ]; then mkdir -p include; fi; 845#bbox# @ln -fsn asm-$(ARCH) $@ 846 847# Split autoconf.h into include/linux/config/* 848quiet_cmd_gen_bbconfigopts = GEN include/bbconfigopts.h 849 cmd_gen_bbconfigopts = $(srctree)/scripts/mkconfigs include/bbconfigopts.h include/bbconfigopts_bz2.h 850quiet_cmd_gen_common_bufsiz = GEN include/common_bufsiz.h 851 cmd_gen_common_bufsiz = $(srctree)/scripts/generate_BUFSIZ.sh include/common_bufsiz.h 852quiet_cmd_split_autoconf = SPLIT include/autoconf.h -> include/config/* 853 cmd_split_autoconf = scripts/basic/split-include include/autoconf.h include/config 854quiet_cmd_gen_embedded_scripts = GEN include/embedded_scripts.h 855 cmd_gen_embedded_scripts = $(srctree)/scripts/embedded_scripts include/embedded_scripts.h $(srctree)/embed $(srctree)/applets_sh 856#bbox# piggybacked generation of few .h files 857include/config/MARKER: scripts/basic/split-include include/autoconf.h $(wildcard $(srctree)/embed/*) $(wildcard $(srctree)/applets_sh/*) $(srctree)/scripts/embedded_scripts 858 $(call cmd,split_autoconf) 859 $(call cmd,gen_bbconfigopts) 860 $(call cmd,gen_common_bufsiz) 861 $(call cmd,gen_embedded_scripts) 862 @touch $@ 863 864# Generate some files 865# --------------------------------------------------------------------------- 866 867# KERNELRELEASE can change from a few different places, meaning version.h 868# needs to be updated, so this check is forced on all builds 869 870uts_len := 64 871 872define filechk_version.h 873 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ 874 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ 875 exit 1; \ 876 fi; \ 877 (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \ 878 echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \ 879 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \ 880 ) 881endef 882 883# --------------------------------------------------------------------------- 884 885PHONY += depend dep 886depend dep: 887 @echo '*** Warning: make $@ is unnecessary now.' 888 889# --------------------------------------------------------------------------- 890# Modules 891 892ifdef _BB_DISABLED_CONFIG_MODULES 893 894# By default, build modules as well 895 896all: modules 897 898# Build modules 899 900PHONY += modules 901modules: $(busybox-dirs) $(if $(KBUILD_BUILTIN),busybox) 902 @echo ' Building modules, stage 2.'; 903 $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost 904 905 906# Target to prepare building external modules 907PHONY += modules_prepare 908modules_prepare: prepare scripts 909 910# Target to install modules 911PHONY += modules_install 912modules_install: _modinst_ _modinst_post 913 914PHONY += _modinst_ 915_modinst_: 916 @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \ 917 echo "Warning: you may need to install module-init-tools"; \ 918 echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ 919 sleep 1; \ 920 fi 921 @rm -rf $(MODLIB)/kernel 922 @rm -f $(MODLIB)/source 923 @mkdir -p $(MODLIB)/kernel 924 @ln -s $(srctree) $(MODLIB)/source 925 @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ 926 rm -f $(MODLIB)/build ; \ 927 ln -s $(objtree) $(MODLIB)/build ; \ 928 fi 929 $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst 930 931# If System.map exists, run depmod. This deliberately does not have a 932# dependency on System.map since that would run the dependency tree on 933# busybox. This depmod is only for convenience to give the initial 934# boot a modules.dep even before / is mounted read-write. However the 935# boot script depmod is the master version. 936ifeq "$(strip $(INSTALL_MOD_PATH))" "" 937depmod_opts := 938else 939depmod_opts := -b $(INSTALL_MOD_PATH) -r 940endif 941PHONY += _modinst_post 942_modinst_post: _modinst_ 943 if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi 944 945else # CONFIG_MODULES 946 947# Modules not configured 948# --------------------------------------------------------------------------- 949 950modules modules_install: FORCE 951 @echo 952 @echo "The present busybox configuration has modules disabled." 953 @echo "Type 'make config' and enable loadable module support." 954 @echo "Then build a kernel with module support enabled." 955 @echo 956 @exit 1 957 958endif # CONFIG_MODULES 959 960### 961# Cleaning is done on three levels. 962# make clean Delete most generated files 963# Leave enough to build external modules 964# make mrproper Delete the current configuration, and all generated files 965# make distclean Remove editor backup files, patch leftover files and the like 966 967# Directories & files removed with 'make clean' 968CLEAN_DIRS += $(MODVERDIR) _install 0_lib 969CLEAN_FILES += busybox busybox_unstripped* busybox.links \ 970 System.map .kernelrelease \ 971 .tmp_kallsyms* .tmp_version .tmp_busybox* .tmp_System.map 972 973# Directories & files removed with 'make mrproper' 974MRPROPER_DIRS += include/config include2 975MRPROPER_FILES += .config .config.old include/asm .version .old_version \ 976 include/NUM_APPLETS.h \ 977 include/common_bufsiz.h \ 978 include/autoconf.h \ 979 include/bbconfigopts.h \ 980 include/bbconfigopts_bz2.h \ 981 include/embedded_scripts.h \ 982 include/usage_compressed.h \ 983 include/applet_tables.h \ 984 include/applets.h \ 985 include/usage.h \ 986 applets/usage \ 987 .kernelrelease Module.symvers tags TAGS cscope* \ 988 busybox_old 989 990# clean - Delete most, but leave enough to build external modules 991# 992clean: rm-dirs := $(CLEAN_DIRS) 993clean: rm-files := $(CLEAN_FILES) 994clean-dirs := $(addprefix _clean_,$(srctree) $(busybox-alldirs)) 995 996PHONY += $(clean-dirs) clean archclean 997$(clean-dirs): 998 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 999 1000clean: archclean $(clean-dirs) 1001 $(call cmd,rmdirs) 1002 $(call cmd,rmfiles) 1003 @find . $(RCS_FIND_IGNORE) \ 1004 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ 1005 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ 1006 -type f -print | xargs rm -f 1007 1008PHONY += doc-clean 1009doc-clean: rm-files := docs/busybox.pod \ 1010 docs/BusyBox.html docs/busybox.1 docs/BusyBox.txt 1011doc-clean: 1012 $(call cmd,rmfiles) 1013 1014# mrproper - Delete all generated files, including .config 1015# 1016mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) 1017mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1018mrproper-dirs := $(addprefix _mrproper_,scripts) 1019 1020PHONY += $(mrproper-dirs) mrproper archmrproper 1021$(mrproper-dirs): 1022 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1023 1024mrproper: clean archmrproper $(mrproper-dirs) 1025 $(call cmd,rmdirs) 1026 $(call cmd,rmfiles) 1027 @find . -name Config.src | sed 's/.src$$/.in/' | xargs -r rm -f 1028 @find . -name Kbuild.src | sed 's/.src$$//' | xargs -r rm -f 1029 1030# distclean 1031# 1032PHONY += distclean 1033 1034distclean: mrproper 1035 @find $(srctree) $(RCS_FIND_IGNORE) \ 1036 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1037 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ 1038 -o -name '.*.rej' -o -name '*.tmp' -o -size 0 \ 1039 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ 1040 -type f -print | xargs rm -f 1041 1042 1043# Packaging of the kernel to various formats 1044# --------------------------------------------------------------------------- 1045# rpm target kept for backward compatibility 1046package-dir := $(srctree)/scripts/package 1047 1048%pkg: FORCE 1049 $(Q)$(MAKE) $(build)=$(package-dir) $@ 1050rpm: FORCE 1051 $(Q)$(MAKE) $(build)=$(package-dir) $@ 1052 1053 1054# Brief documentation of the typical targets used 1055# --------------------------------------------------------------------------- 1056 1057boards := $(wildcard $(srctree)/configs/*_defconfig) 1058boards := $(notdir $(boards)) 1059 1060-include $(srctree)/Makefile.help 1061 1062# Documentation targets 1063# --------------------------------------------------------------------------- 1064%docs: scripts_basic FORCE 1065 $(Q)$(MAKE) $(build)=Documentation/DocBook $@ 1066 1067else # KBUILD_EXTMOD 1068 1069### 1070# External module support. 1071# When building external modules the kernel used as basis is considered 1072# read-only, and no consistency checks are made and the make 1073# system is not used on the basis kernel. If updates are required 1074# in the basis kernel ordinary make commands (without M=...) must 1075# be used. 1076# 1077# The following are the only valid targets when building external 1078# modules. 1079# make M=dir clean Delete all automatically generated files 1080# make M=dir modules Make all modules in specified dir 1081# make M=dir Same as 'make M=dir modules' 1082# make M=dir modules_install 1083# Install the modules build in the module directory 1084# Assumes install directory is already created 1085 1086# We are always building modules 1087KBUILD_MODULES := 1 1088PHONY += crmodverdir 1089crmodverdir: 1090 $(Q)mkdir -p $(MODVERDIR) 1091 $(Q)rm -f $(MODVERDIR)/* 1092 1093PHONY += $(objtree)/Module.symvers 1094$(objtree)/Module.symvers: 1095 @test -e $(objtree)/Module.symvers || ( \ 1096 echo; \ 1097 echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \ 1098 echo " is missing; modules will have no dependencies and modversions."; \ 1099 echo ) 1100 1101module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD)) 1102PHONY += $(module-dirs) modules 1103$(module-dirs): crmodverdir $(objtree)/Module.symvers 1104 $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@) 1105 1106modules: $(module-dirs) 1107 @echo ' Building modules, stage 2.'; 1108 $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost 1109 1110PHONY += modules_install 1111modules_install: _emodinst_ _emodinst_post 1112 1113install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra) 1114PHONY += _emodinst_ 1115_emodinst_: 1116 $(Q)mkdir -p $(MODLIB)/$(install-dir) 1117 $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst 1118 1119# Run depmod only is we have System.map and depmod is executable 1120quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) 1121 cmd_depmod = if [ -r System.map -a -x $(DEPMOD) ]; then \ 1122 $(DEPMOD) -ae -F System.map \ 1123 $(if $(strip $(INSTALL_MOD_PATH)), \ 1124 -b $(INSTALL_MOD_PATH) -r) \ 1125 $(KERNELRELEASE); \ 1126 fi 1127 1128PHONY += _emodinst_post 1129_emodinst_post: _emodinst_ 1130 $(call cmd,depmod) 1131 1132clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD)) 1133 1134PHONY += $(clean-dirs) clean 1135$(clean-dirs): 1136 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1137 1138clean: rm-dirs := $(MODVERDIR) 1139clean: $(clean-dirs) 1140 $(call cmd,rmdirs) 1141 @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \ 1142 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ 1143 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ 1144 -type f -print | xargs rm -f 1145 1146# Dummies... 1147PHONY += prepare scripts 1148prepare: ; 1149scripts: ; 1150endif # KBUILD_EXTMOD 1151 1152# Generate tags for editors 1153# --------------------------------------------------------------------------- 1154 1155#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set 1156#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file. 1157#Adding $(srctree) adds about 20M on i386 to the size of the output file! 1158 1159ifeq ($(src),$(obj)) 1160__srctree = 1161else 1162__srctree = $(srctree)/ 1163endif 1164 1165ifeq ($(ALLSOURCE_ARCHS),) 1166ifeq ($(ARCH),um) 1167ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH) 1168else 1169ALLINCLUDE_ARCHS := $(ARCH) 1170endif 1171else 1172#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour. 1173ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS) 1174endif 1175 1176ALLSOURCE_ARCHS := $(ARCH) 1177 1178define all-sources 1179 ( find -regex '.*\.[ch]$$' ) 1180endef 1181 1182quiet_cmd_cscope-file = FILELST cscope.files 1183 cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files 1184 1185quiet_cmd_cscope = MAKE cscope.out 1186 cmd_cscope = cscope -b 1187 1188cscope: FORCE 1189 $(call cmd,cscope-file) 1190 $(call cmd,cscope) 1191 1192quiet_cmd_TAGS = MAKE $@ 1193define cmd_TAGS 1194 rm -f $@; \ 1195 ETAGSF=`etags --version | grep -i exuberant >/dev/null && \ 1196 echo "-I __initdata,__exitdata,__acquires,__releases \ 1197 -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \ 1198 --extra=+f --c-kinds=+px"`; \ 1199 $(all-sources) | xargs etags $$ETAGSF -a 1200endef 1201 1202TAGS: FORCE 1203 $(call cmd,TAGS) 1204 1205 1206quiet_cmd_tags = MAKE $@ 1207define cmd_tags 1208 rm -f $@; \ 1209 CTAGSF=`ctags --version | grep -i exuberant >/dev/null && \ 1210 echo "-I __initdata,__exitdata,__acquires,__releases \ 1211 -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \ 1212 --extra=+f --c-kinds=+px"`; \ 1213 $(all-sources) | xargs ctags $$CTAGSF -a 1214endef 1215 1216tags: FORCE 1217 $(call cmd,tags) 1218 1219 1220# Scripts to check various things for consistency 1221# --------------------------------------------------------------------------- 1222 1223includecheck: 1224 find * $(RCS_FIND_IGNORE) \ 1225 -name '*.[hcS]' -type f -print | sort \ 1226 | xargs $(PERL) -w scripts/checkincludes.pl 1227 1228versioncheck: 1229 find * $(RCS_FIND_IGNORE) \ 1230 -name '*.[hcS]' -type f -print | sort \ 1231 | xargs $(PERL) -w scripts/checkversion.pl 1232 1233namespacecheck: 1234 $(PERL) $(srctree)/scripts/namespace.pl 1235 1236endif #ifeq ($(config-targets),1) 1237endif #ifeq ($(mixed-targets),1) 1238 1239PHONY += checkstack 1240checkstack: 1241 $(OBJDUMP) -d busybox $$(find . -name '*.ko') | \ 1242 $(PERL) $(src)/scripts/checkstack.pl $(ARCH) 1243 1244kernelrelease: 1245 $(if $(wildcard .kernelrelease), $(Q)echo $(KERNELRELEASE), \ 1246 $(error kernelrelease not valid - run 'make *config' to update it)) 1247kernelversion: 1248 @echo $(KERNELVERSION) 1249 1250# Single targets 1251# --------------------------------------------------------------------------- 1252# Single targets are compatible with: 1253# - build whith mixed source and output 1254# - build with separate output dir 'make O=...' 1255# - external modules 1256# 1257# target-dir => where to store outputfile 1258# build-dir => directory in kernel source tree to use 1259 1260ifeq ($(KBUILD_EXTMOD),) 1261 build-dir = $(patsubst %/,%,$(dir $@)) 1262 target-dir = $(dir $@) 1263else 1264 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) 1265 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) 1266 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) 1267endif 1268 1269%.s: %.c prepare scripts FORCE 1270 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1271%.i: %.c prepare scripts FORCE 1272 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1273%.o: %.c prepare scripts FORCE 1274 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1275%.lst: %.c prepare scripts FORCE 1276 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1277%.s: %.S prepare scripts FORCE 1278 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1279%.o: %.S prepare scripts FORCE 1280 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1281 1282# Modules 1283%/: prepare scripts FORCE 1284 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1285 $(build)=$(build-dir) 1286/: prepare scripts FORCE 1287 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1288 $(build)=$(build-dir) 1289 1290%.ko: prepare scripts FORCE 1291 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1292 $(build)=$(build-dir) $(@:.ko=.o) 1293 $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost 1294 1295# FIXME Should go into a make.lib or something 1296# =========================================================================== 1297 1298quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) 1299 cmd_rmdirs = rm -rf $(rm-dirs) 1300 1301quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 1302 cmd_rmfiles = rm -f $(rm-files) 1303 1304 1305a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \ 1306 $(NOSTDINC_FLAGS) $(CPPFLAGS) \ 1307 $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o) 1308 1309quiet_cmd_as_o_S = AS $@ 1310cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< 1311 1312# read all saved command lines 1313 1314targets := $(wildcard $(sort $(targets))) 1315cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 1316 1317ifneq ($(cmd_files),) 1318 $(cmd_files): ; # Do not try to update included dependency files 1319 include $(cmd_files) 1320endif 1321 1322# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir 1323# Usage: 1324# $(Q)$(MAKE) $(clean)=dir 1325clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj 1326 1327endif # skip-makefile 1328 1329PHONY += FORCE 1330FORCE: 1331 1332-include $(srctree)/Makefile.custom 1333 1334# Declare the contents of the .PHONY variable as phony. We keep that 1335# information in a variable se we can use it in if_changed and friends. 1336.PHONY: $(PHONY) 1337