1 /* vi: set sw=4 ts=4: */
2 /*
3 * ifconfig
4 *
5 * Similar to the standard Unix ifconfig, but with only the necessary
6 * parts for AF_INET, and without any printing of if info (for now).
7 *
8 * Bjorn Wesen, Axis Communications AB
9 *
10 * Authors of the original ifconfig was:
11 * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
12 *
13 * Licensed under GPLv2 or later, see file LICENSE in this source tree.
14 */
15 /*
16 * Heavily modified by Manuel Novoa III Mar 6, 2001
17 *
18 * From initial port to busybox, removed most of the redundancy by
19 * converting to a table-driven approach. Added several (optional)
20 * args missing from initial port.
21 *
22 * Still missing: media, tunnel.
23 *
24 * 2002-04-20
25 * IPV6 support added by Bart Visscher <magick@linux-fan.com>
26 */
27 //config:config IFCONFIG
28 //config: bool "ifconfig (12 kb)"
29 //config: default y
30 //config: help
31 //config: Ifconfig is used to configure the kernel-resident network interfaces.
32 //config:
33 //config:config FEATURE_IFCONFIG_STATUS
34 //config: bool "Enable status reporting output (+7k)"
35 //config: default y
36 //config: depends on IFCONFIG
37 //config: help
38 //config: If ifconfig is called with no arguments it will display the status
39 //config: of the currently active interfaces.
40 //config:
41 //config:config FEATURE_IFCONFIG_SLIP
42 //config: bool "Enable slip-specific options \"keepalive\" and \"outfill\""
43 //config: default y
44 //config: depends on IFCONFIG
45 //config: help
46 //config: Allow "keepalive" and "outfill" support for SLIP. If you're not
47 //config: planning on using serial lines, leave this unchecked.
48 //config:
49 //config:config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
50 //config: bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
51 //config: default y
52 //config: depends on IFCONFIG
53 //config: help
54 //config: Allow the start address for shared memory, start address for I/O,
55 //config: and/or the interrupt line used by the specified device.
56 //config:
57 //config:config FEATURE_IFCONFIG_HW
58 //config: bool "Enable option \"hw\" (ether only)"
59 //config: default y
60 //config: depends on IFCONFIG
61 //config: help
62 //config: Set the hardware address of this interface, if the device driver
63 //config: supports this operation. Currently, we only support the 'ether'
64 //config: class.
65 //config:
66 //config:config FEATURE_IFCONFIG_BROADCAST_PLUS
67 //config: bool "Set the broadcast automatically"
68 //config: default y
69 //config: depends on IFCONFIG
70 //config: help
71 //config: Setting this will make ifconfig attempt to find the broadcast
72 //config: automatically if the value '+' is used.
73
74 //applet:IF_IFCONFIG(APPLET(ifconfig, BB_DIR_SBIN, BB_SUID_DROP))
75
76 //kbuild:lib-$(CONFIG_IFCONFIG) += ifconfig.o interface.o
77
78 //usage:#define ifconfig_trivial_usage
79 //usage: IF_FEATURE_IFCONFIG_STATUS("[-a]") " [IFACE] [ADDRESS]"
80 //usage:#define ifconfig_full_usage "\n\n"
81 //usage: "Configure a network interface\n"
82 //usage: "\n"
83 //usage: IF_FEATURE_IPV6(
84 //usage: " [add ADDRESS[/PREFIXLEN]]\n")
85 //usage: IF_FEATURE_IPV6(
86 //usage: " [del ADDRESS[/PREFIXLEN]]\n")
87 //usage: " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n"
88 //usage: " [netmask ADDRESS] [dstaddr ADDRESS]\n"
89 //usage: IF_FEATURE_IFCONFIG_SLIP(
90 //usage: " [outfill NN] [keepalive NN]\n")
91 //usage: " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n"
92 //usage: " [[-]trailers] [[-]arp] [[-]allmulti]\n"
93 //usage: " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n"
94 //usage: IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ(
95 //usage: " [mem_start NN] [io_addr NN] [irq NN]\n")
96 //usage: " [up|down] ..."
97
98 #include "libbb.h"
99 #include "inet_common.h"
100 #include <net/if.h>
101 #include <net/if_arp.h>
102 #include <netinet/in.h>
103 #ifdef HAVE_NET_ETHERNET_H
104 # include <net/ethernet.h>
105 #endif
106
107 #if ENABLE_FEATURE_IFCONFIG_SLIP
108 # include <linux/if_slip.h>
109 #endif
110
111 /* I don't know if this is needed for busybox or not. Anyone? */
112 #define QUESTIONABLE_ALIAS_CASE
113
114
115 /* Defines for glibc2.0 users. */
116 #ifndef SIOCSIFTXQLEN
117 # define SIOCSIFTXQLEN 0x8943
118 # define SIOCGIFTXQLEN 0x8942
119 #endif
120
121 /* ifr_qlen is ifru_ivalue, but it isn't present in 2.0 kernel headers */
122 #ifndef ifr_qlen
123 # define ifr_qlen ifr_ifru.ifru_mtu
124 #endif
125
126 #ifndef IFF_DYNAMIC
127 # define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses */
128 #endif
129
130 #if ENABLE_FEATURE_IPV6
131 struct in6_ifreq {
132 struct in6_addr ifr6_addr;
133 uint32_t ifr6_prefixlen;
134 int ifr6_ifindex;
135 };
136 #endif
137
138 /*
139 * Here are the bit masks for the "flags" member of struct options below.
140 * N_ signifies no arg prefix; M_ signifies arg prefixed by '-'.
141 * CLR clears the flag; SET sets the flag; ARG signifies (optional) arg.
142 */
143 #define N_CLR 0x01
144 #define M_CLR 0x02
145 #define N_SET 0x04
146 #define M_SET 0x08
147 #define N_ARG 0x10
148 #define M_ARG 0x20
149
150 #define M_MASK (M_CLR | M_SET | M_ARG)
151 #define N_MASK (N_CLR | N_SET | N_ARG)
152 #define SET_MASK (N_SET | M_SET)
153 #define CLR_MASK (N_CLR | M_CLR)
154 #define SET_CLR_MASK (SET_MASK | CLR_MASK)
155 #define ARG_MASK (M_ARG | N_ARG)
156
157 /*
158 * Here are the bit masks for the "arg_flags" member of struct options below.
159 */
160
161 /*
162 * cast type:
163 * 00 int
164 * 01 char *
165 * 02 HOST_COPY in_ether
166 * 03 HOST_COPY INET_resolve
167 */
168 #define A_CAST_TYPE 0x03
169 /*
170 * map type:
171 * 00 not a map type (mem_start, io_addr, irq)
172 * 04 memstart (unsigned long)
173 * 08 io_addr (unsigned short)
174 * 0C irq (unsigned char)
175 */
176 #define A_MAP_TYPE 0x0C
177 #define A_ARG_REQ 0x10 /* Set if an arg is required. */
178 #define A_NETMASK 0x20 /* Set if netmask (check for multiple sets). */
179 #define A_SET_AFTER 0x40 /* Set a flag at the end. */
180 #define A_COLON_CHK 0x80 /* Is this needed? See below. */
181 #if ENABLE_FEATURE_IFCONFIG_BROADCAST_PLUS
182 #define A_HOSTNAME 0x100 /* Set if it is ip addr. */
183 #define A_BROADCAST 0x200 /* Set if it is broadcast addr. */
184 #else
185 #define A_HOSTNAME 0
186 #define A_BROADCAST 0
187 #endif
188
189 /*
190 * These defines are for dealing with the A_CAST_TYPE field.
191 */
192 #define A_CAST_CHAR_PTR 0x01
193 #define A_CAST_RESOLVE 0x01
194 #define A_CAST_HOST_COPY 0x02
195 #define A_CAST_HOST_COPY_IN_ETHER A_CAST_HOST_COPY
196 #define A_CAST_HOST_COPY_RESOLVE (A_CAST_HOST_COPY | A_CAST_RESOLVE)
197
198 /*
199 * These defines are for dealing with the A_MAP_TYPE field.
200 */
201 #define A_MAP_ULONG 0x04 /* memstart */
202 #define A_MAP_USHORT 0x08 /* io_addr */
203 #define A_MAP_UCHAR 0x0C /* irq */
204
205 /*
206 * Define the bit masks signifying which operations to perform for each arg.
207 */
208
209 #define ARG_METRIC (A_ARG_REQ /*| A_CAST_INT*/)
210 #define ARG_MTU (A_ARG_REQ /*| A_CAST_INT*/)
211 #define ARG_TXQUEUELEN (A_ARG_REQ /*| A_CAST_INT*/)
212 #define ARG_MEM_START (A_ARG_REQ | A_MAP_ULONG)
213 #define ARG_IO_ADDR (A_ARG_REQ | A_MAP_ULONG)
214 #define ARG_IRQ (A_ARG_REQ | A_MAP_UCHAR)
215 #define ARG_DSTADDR (A_ARG_REQ | A_CAST_HOST_COPY_RESOLVE)
216 #define ARG_NETMASK (A_ARG_REQ | A_CAST_HOST_COPY_RESOLVE | A_NETMASK)
217 #define ARG_BROADCAST (A_ARG_REQ | A_CAST_HOST_COPY_RESOLVE | A_SET_AFTER | A_BROADCAST)
218 #define ARG_HW (A_ARG_REQ | A_CAST_HOST_COPY_IN_ETHER)
219 #define ARG_POINTOPOINT (A_ARG_REQ | A_CAST_HOST_COPY_RESOLVE | A_SET_AFTER)
220 #define ARG_KEEPALIVE (A_ARG_REQ | A_CAST_CHAR_PTR)
221 #define ARG_OUTFILL (A_ARG_REQ | A_CAST_CHAR_PTR)
222 #define ARG_HOSTNAME (A_CAST_HOST_COPY_RESOLVE | A_SET_AFTER | A_COLON_CHK | A_HOSTNAME)
223 #define ARG_ADD_DEL (A_CAST_HOST_COPY_RESOLVE | A_SET_AFTER)
224
225
226 struct arg1opt {
227 const char *name;
228 unsigned short selector;
229 unsigned short ifr_offset;
230 };
231
232 struct options {
233 const char *name;
234 #if ENABLE_FEATURE_IFCONFIG_BROADCAST_PLUS
235 const unsigned int flags:6;
236 const unsigned int arg_flags:10;
237 #else
238 const unsigned char flags;
239 const unsigned char arg_flags;
240 #endif
241 const unsigned short selector;
242 };
243
244 #define ifreq_offsetof(x) offsetof(struct ifreq, x)
245
246 /*
247 * Set up the tables. Warning! They must have corresponding order!
248 */
249
250 static const struct arg1opt Arg1Opt[] ALIGN_PTR = {
251 { "SIFMETRIC", SIOCSIFMETRIC, ifreq_offsetof(ifr_metric) },
252 { "SIFMTU", SIOCSIFMTU, ifreq_offsetof(ifr_mtu) },
253 { "SIFTXQLEN", SIOCSIFTXQLEN, ifreq_offsetof(ifr_qlen) },
254 { "SIFDSTADDR", SIOCSIFDSTADDR, ifreq_offsetof(ifr_dstaddr) },
255 { "SIFNETMASK", SIOCSIFNETMASK, ifreq_offsetof(ifr_netmask) },
256 { "SIFBRDADDR", SIOCSIFBRDADDR, ifreq_offsetof(ifr_broadaddr) },
257 #if ENABLE_FEATURE_IFCONFIG_HW
258 { "SIFHWADDR", SIOCSIFHWADDR, ifreq_offsetof(ifr_hwaddr) },
259 #endif
260 { "SIFDSTADDR", SIOCSIFDSTADDR, ifreq_offsetof(ifr_dstaddr) },
261 #ifdef SIOCSKEEPALIVE
262 { "SKEEPALIVE", SIOCSKEEPALIVE, ifreq_offsetof(ifr_data) },
263 #endif
264 #ifdef SIOCSOUTFILL
265 { "SOUTFILL", SIOCSOUTFILL, ifreq_offsetof(ifr_data) },
266 #endif
267 #if ENABLE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
268 { "SIFMAP", SIOCSIFMAP, ifreq_offsetof(ifr_map.mem_start) },
269 { "SIFMAP", SIOCSIFMAP, ifreq_offsetof(ifr_map.base_addr) },
270 { "SIFMAP", SIOCSIFMAP, ifreq_offsetof(ifr_map.irq) },
271 #endif
272 #if ENABLE_FEATURE_IPV6
273 { "SIFADDR", SIOCSIFADDR, ifreq_offsetof(ifr_addr) }, /* IPv6 version ignores the offset */
274 { "DIFADDR", SIOCDIFADDR, ifreq_offsetof(ifr_addr) }, /* IPv6 version ignores the offset */
275 #endif
276 /* Last entry is for unmatched (assumed to be hostname/address) arg. */
277 { "SIFADDR", SIOCSIFADDR, ifreq_offsetof(ifr_addr) },
278 };
279
280 static const struct options OptArray[] ALIGN_PTR = {
281 { "metric", N_ARG, ARG_METRIC, 0 },
282 { "mtu", N_ARG, ARG_MTU, 0 },
283 { "txqueuelen", N_ARG, ARG_TXQUEUELEN, 0 },
284 { "dstaddr", N_ARG, ARG_DSTADDR, 0 },
285 { "netmask", N_ARG, ARG_NETMASK, 0 },
286 { "broadcast", N_ARG | M_CLR, ARG_BROADCAST, IFF_BROADCAST },
287 #if ENABLE_FEATURE_IFCONFIG_HW
288 { "hw", N_ARG, ARG_HW, 0 },
289 #endif
290 { "pointopoint", N_ARG | M_CLR, ARG_POINTOPOINT, IFF_POINTOPOINT },
291 #ifdef SIOCSKEEPALIVE
292 { "keepalive", N_ARG, ARG_KEEPALIVE, 0 },
293 #endif
294 #ifdef SIOCSOUTFILL
295 { "outfill", N_ARG, ARG_OUTFILL, 0 },
296 #endif
297 #if ENABLE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
298 { "mem_start", N_ARG, ARG_MEM_START, 0 },
299 { "io_addr", N_ARG, ARG_IO_ADDR, 0 },
300 { "irq", N_ARG, ARG_IRQ, 0 },
301 #endif
302 #if ENABLE_FEATURE_IPV6
303 { "add", N_ARG, ARG_ADD_DEL, 0 },
304 { "del", N_ARG, ARG_ADD_DEL, 0 },
305 #endif
306 { "arp", N_CLR | M_SET, 0, IFF_NOARP },
307 { "trailers", N_CLR | M_SET, 0, IFF_NOTRAILERS },
308 { "promisc", N_SET | M_CLR, 0, IFF_PROMISC },
309 { "multicast", N_SET | M_CLR, 0, IFF_MULTICAST },
310 { "allmulti", N_SET | M_CLR, 0, IFF_ALLMULTI },
311 { "dynamic", N_SET | M_CLR, 0, IFF_DYNAMIC },
312 { "up", N_SET, 0, (IFF_UP | IFF_RUNNING) },
313 { "down", N_CLR, 0, IFF_UP },
314 { NULL, 0, ARG_HOSTNAME, (IFF_UP | IFF_RUNNING) }
315 };
316
317 int ifconfig_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
ifconfig_main(int argc UNUSED_PARAM,char ** argv)318 int ifconfig_main(int argc UNUSED_PARAM, char **argv)
319 {
320 struct ifreq ifr;
321 struct sockaddr_in sai;
322 #if ENABLE_FEATURE_IFCONFIG_HW
323 struct sockaddr sa;
324 #endif
325 const struct arg1opt *a1op;
326 const struct options *op;
327 int sockfd; /* socket fd we use to manipulate stuff with */
328 int selector;
329 #if ENABLE_FEATURE_IFCONFIG_BROADCAST_PLUS
330 unsigned int mask;
331 unsigned int did_flags;
332 unsigned int sai_hostname, sai_netmask;
333 #else
334 unsigned char mask;
335 unsigned char did_flags;
336 #endif
337 char *p;
338 /*char host[128];*/
339 const char *host = NULL; /* make gcc happy */
340 IF_FEATURE_IFCONFIG_STATUS(char *show_all_param;)
341
342 did_flags = 0;
343 #if ENABLE_FEATURE_IFCONFIG_BROADCAST_PLUS
344 sai_hostname = 0;
345 sai_netmask = 0;
346 #endif
347
348 /* skip argv[0] */
349 ++argv;
350
351 #if ENABLE_FEATURE_IFCONFIG_STATUS
352 show_all_param = NULL;
353 if (argv[0] && argv[0][0] == '-' && argv[0][1] == 'a' && !argv[0][2]) {
354 ++argv;
355 show_all_param = IFNAME_SHOW_DOWNED_TOO;
356 }
357 #endif
358
359 if (!argv[0] || !argv[1]) { /* one or no args */
360 #if ENABLE_FEATURE_IFCONFIG_STATUS
361 return display_interfaces(argv[0] ? argv[0] : show_all_param);
362 #else
363 bb_simple_error_msg_and_die("no support for status display");
364 #endif
365 }
366
367 /* Create a channel to the NET kernel. */
368 sockfd = xsocket(AF_INET, SOCK_DGRAM, 0);
369
370 /* get interface name */
371 strncpy_IFNAMSIZ(ifr.ifr_name, *argv);
372
373 /* Process the remaining arguments. */
374 while (*++argv != NULL) {
375 p = *argv;
376 mask = N_MASK;
377 if (*p == '-') { /* If the arg starts with '-'... */
378 ++p; /* advance past it and */
379 mask = M_MASK; /* set the appropriate mask. */
380 }
381 for (op = OptArray; op->name; op++) { /* Find table entry. */
382 if (strcmp(p, op->name) == 0) { /* If name matches... */
383 mask &= op->flags;
384 if (mask) /* set the mask and go. */
385 goto FOUND_ARG;
386 /* If we get here, there was a valid arg with an */
387 /* invalid '-' prefix. */
388 bb_error_msg_and_die("bad: '%s'", p-1);
389 }
390 }
391
392 /* We fell through, so treat as possible hostname. */
393 a1op = Arg1Opt + ARRAY_SIZE(Arg1Opt) - 1;
394 mask = op->arg_flags;
395 goto HOSTNAME;
396
397 FOUND_ARG:
398 if (mask & ARG_MASK) {
399 mask = op->arg_flags;
400 if (mask & A_NETMASK & did_flags)
401 bb_show_usage();
402 a1op = Arg1Opt + (op - OptArray);
403 if (*++argv == NULL) {
404 if (mask & A_ARG_REQ)
405 bb_show_usage();
406 --argv;
407 mask &= A_SET_AFTER; /* just for broadcast */
408 } else { /* got an arg so process it */
409 HOSTNAME:
410 did_flags |= (mask & (A_NETMASK|A_HOSTNAME));
411 if (mask & A_CAST_HOST_COPY) {
412 #if ENABLE_FEATURE_IFCONFIG_HW
413 if (mask & A_CAST_RESOLVE) {
414 #endif
415 host = *argv;
416 if (strcmp(host, "inet") == 0)
417 continue; /* compat stuff */
418 sai.sin_family = AF_INET;
419 sai.sin_port = 0;
420 if (strcmp(host, "default") == 0) {
421 /* Default is special, meaning 0.0.0.0. */
422 sai.sin_addr.s_addr = INADDR_ANY;
423 }
424 #if ENABLE_FEATURE_IFCONFIG_BROADCAST_PLUS
425 else if ((host[0] == '+' && !host[1])
426 && (mask & A_BROADCAST)
427 && (did_flags & (A_NETMASK|A_HOSTNAME)) == (A_NETMASK|A_HOSTNAME)
428 ) {
429 /* + is special, meaning broadcast is derived. */
430 sai.sin_addr.s_addr = (~sai_netmask) | (sai_hostname & sai_netmask);
431 }
432 #endif
433 else {
434 len_and_sockaddr *lsa;
435 #if ENABLE_FEATURE_IPV6
436 char *prefix;
437 int prefix_len = 0;
438 prefix = strchr(host, '/');
439 if (prefix) {
440 prefix_len = xatou_range(prefix + 1, 0, 128);
441 *prefix = '\0';
442 }
443 resolve:
444 #endif
445 lsa = xhost2sockaddr(host, 0);
446 #if ENABLE_FEATURE_IPV6
447 if (lsa->u.sa.sa_family != AF_INET6 && prefix) {
448 /* TODO: we do not support "ifconfig eth0 up 1.2.3.4/17".
449 * For now, just make it fail instead of silently ignoring "/17" part:
450 */
451 *prefix = '/';
452 goto resolve;
453 }
454 if (lsa->u.sa.sa_family == AF_INET6) {
455 int sockfd6;
456 struct in6_ifreq ifr6;
457
458 sockfd6 = xsocket(AF_INET6, SOCK_DGRAM, 0);
459 xioctl(sockfd6, SIOCGIFINDEX, &ifr);
460 ifr6.ifr6_ifindex = ifr.ifr_ifindex;
461 ifr6.ifr6_prefixlen = prefix_len;
462 memcpy(&ifr6.ifr6_addr,
463 &lsa->u.sin6.sin6_addr,
464 sizeof(struct in6_addr));
465 ioctl_or_perror_and_die(sockfd6, a1op->selector, &ifr6, "SIOC%s", a1op->name);
466 if (ENABLE_FEATURE_CLEAN_UP)
467 free(lsa);
468 continue;
469 }
470 #endif
471 sai.sin_addr = lsa->u.sin.sin_addr;
472 if (ENABLE_FEATURE_CLEAN_UP)
473 free(lsa);
474 }
475 #if ENABLE_FEATURE_IFCONFIG_BROADCAST_PLUS
476 if (mask & A_HOSTNAME)
477 sai_hostname = sai.sin_addr.s_addr;
478 if (mask & A_NETMASK)
479 sai_netmask = sai.sin_addr.s_addr;
480 #endif
481 p = (char *) &sai;
482 #if ENABLE_FEATURE_IFCONFIG_HW
483 } else { /* A_CAST_HOST_COPY_IN_ETHER */
484 /* This is the "hw" arg case. */
485 smalluint hw_class = index_in_substrings("ether\0"
486 IF_FEATURE_HWIB("infiniband\0"), *argv) + 1;
487 if (!hw_class || !*++argv)
488 bb_show_usage();
489 host = *argv;
490 if (hw_class == 1 ? in_ether(host, &sa) : in_ib(host, &sa))
491 bb_error_msg_and_die("invalid hw-addr %s", host);
492 p = (char *) &sa;
493 }
494 #endif
495 memcpy( ((char *)&ifr) + a1op->ifr_offset,
496 p, sizeof(struct sockaddr));
497 } else {
498 /* FIXME: error check?? */
499 unsigned long i = strtoul(*argv, NULL, 0);
500 p = ((char *)&ifr) + a1op->ifr_offset;
501 #if ENABLE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
502 if (mask & A_MAP_TYPE) {
503 xioctl(sockfd, SIOCGIFMAP, &ifr);
504 if ((mask & A_MAP_UCHAR) == A_MAP_UCHAR)
505 *(unsigned char *) p = i;
506 else if (mask & A_MAP_USHORT)
507 *(unsigned short *) p = i;
508 else
509 *(unsigned long *) p = i;
510 } else
511 #endif
512 if (mask & A_CAST_CHAR_PTR)
513 *(caddr_t *) p = (caddr_t) i;
514 else /* A_CAST_INT */
515 *(int *) p = i;
516 }
517
518 ioctl_or_perror_and_die(sockfd, a1op->selector, &ifr, "SIOC%s", a1op->name);
519 #ifdef QUESTIONABLE_ALIAS_CASE
520 if (mask & A_COLON_CHK) {
521 /*
522 * Don't do the set_flag() if the address is an alias with
523 * a '-' at the end, since it's deleted already! - Roman
524 *
525 * Should really use regex.h here, not sure though how well
526 * it'll go with the cross-platform support etc.
527 */
528 char *ptr;
529 short int found_colon = 0;
530 for (ptr = ifr.ifr_name; *ptr; ptr++)
531 if (*ptr == ':')
532 found_colon++;
533 if (found_colon && ptr[-1] == '-')
534 continue;
535 }
536 #endif
537 }
538 if (!(mask & A_SET_AFTER))
539 continue;
540 mask = N_SET;
541 } /* if (mask & ARG_MASK) */
542
543 xioctl(sockfd, SIOCGIFFLAGS, &ifr);
544 selector = op->selector;
545 if (mask & SET_MASK)
546 ifr.ifr_flags |= selector;
547 else
548 ifr.ifr_flags &= ~selector;
549 xioctl(sockfd, SIOCSIFFLAGS, &ifr);
550 } /* while () */
551
552 if (ENABLE_FEATURE_CLEAN_UP)
553 close(sockfd);
554 return 0;
555 }
556