1 /*
2 * linux/drivers/mfd/ucb1x00-core.c
3 *
4 * Copyright (C) 2001 Russell King, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License.
9 *
10 * The UCB1x00 core driver provides basic services for handling IO,
11 * the ADC, interrupts, and accessing registers. It is designed
12 * such that everything goes through this layer, thereby providing
13 * a consistent locking methodology, as well as allowing the drivers
14 * to be used on other non-MCP-enabled hardware platforms.
15 *
16 * Note that all locks are private to this file. Nothing else may
17 * touch them.
18 */
19 #include <linux/module.h>
20 #include <linux/kernel.h>
21 #include <linux/sched.h>
22 #include <linux/slab.h>
23 #include <linux/init.h>
24 #include <linux/errno.h>
25 #include <linux/interrupt.h>
26 #include <linux/irq.h>
27 #include <linux/device.h>
28 #include <linux/mutex.h>
29 #include <linux/mfd/ucb1x00.h>
30 #include <linux/pm.h>
31 #include <linux/gpio.h>
32
33 static DEFINE_MUTEX(ucb1x00_mutex);
34 static LIST_HEAD(ucb1x00_drivers);
35 static LIST_HEAD(ucb1x00_devices);
36
37 /**
38 * ucb1x00_io_set_dir - set IO direction
39 * @ucb: UCB1x00 structure describing chip
40 * @in: bitfield of IO pins to be set as inputs
41 * @out: bitfield of IO pins to be set as outputs
42 *
43 * Set the IO direction of the ten general purpose IO pins on
44 * the UCB1x00 chip. The @in bitfield has priority over the
45 * @out bitfield, in that if you specify a pin as both input
46 * and output, it will end up as an input.
47 *
48 * ucb1x00_enable must have been called to enable the comms
49 * before using this function.
50 *
51 * This function takes a spinlock, disabling interrupts.
52 */
ucb1x00_io_set_dir(struct ucb1x00 * ucb,unsigned int in,unsigned int out)53 void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int in, unsigned int out)
54 {
55 unsigned long flags;
56
57 spin_lock_irqsave(&ucb->io_lock, flags);
58 ucb->io_dir |= out;
59 ucb->io_dir &= ~in;
60
61 ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
62 spin_unlock_irqrestore(&ucb->io_lock, flags);
63 }
64
65 /**
66 * ucb1x00_io_write - set or clear IO outputs
67 * @ucb: UCB1x00 structure describing chip
68 * @set: bitfield of IO pins to set to logic '1'
69 * @clear: bitfield of IO pins to set to logic '0'
70 *
71 * Set the IO output state of the specified IO pins. The value
72 * is retained if the pins are subsequently configured as inputs.
73 * The @clear bitfield has priority over the @set bitfield -
74 * outputs will be cleared.
75 *
76 * ucb1x00_enable must have been called to enable the comms
77 * before using this function.
78 *
79 * This function takes a spinlock, disabling interrupts.
80 */
ucb1x00_io_write(struct ucb1x00 * ucb,unsigned int set,unsigned int clear)81 void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear)
82 {
83 unsigned long flags;
84
85 spin_lock_irqsave(&ucb->io_lock, flags);
86 ucb->io_out |= set;
87 ucb->io_out &= ~clear;
88
89 ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
90 spin_unlock_irqrestore(&ucb->io_lock, flags);
91 }
92
93 /**
94 * ucb1x00_io_read - read the current state of the IO pins
95 * @ucb: UCB1x00 structure describing chip
96 *
97 * Return a bitfield describing the logic state of the ten
98 * general purpose IO pins.
99 *
100 * ucb1x00_enable must have been called to enable the comms
101 * before using this function.
102 *
103 * This function does not take any mutexes or spinlocks.
104 */
ucb1x00_io_read(struct ucb1x00 * ucb)105 unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
106 {
107 return ucb1x00_reg_read(ucb, UCB_IO_DATA);
108 }
109
ucb1x00_gpio_set(struct gpio_chip * chip,unsigned offset,int value)110 static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
111 {
112 struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
113 unsigned long flags;
114
115 spin_lock_irqsave(&ucb->io_lock, flags);
116 if (value)
117 ucb->io_out |= 1 << offset;
118 else
119 ucb->io_out &= ~(1 << offset);
120
121 ucb1x00_enable(ucb);
122 ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
123 ucb1x00_disable(ucb);
124 spin_unlock_irqrestore(&ucb->io_lock, flags);
125 }
126
ucb1x00_gpio_get(struct gpio_chip * chip,unsigned offset)127 static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
128 {
129 struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
130 unsigned val;
131
132 ucb1x00_enable(ucb);
133 val = ucb1x00_reg_read(ucb, UCB_IO_DATA);
134 ucb1x00_disable(ucb);
135
136 return val & (1 << offset);
137 }
138
ucb1x00_gpio_direction_input(struct gpio_chip * chip,unsigned offset)139 static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
140 {
141 struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
142 unsigned long flags;
143
144 spin_lock_irqsave(&ucb->io_lock, flags);
145 ucb->io_dir &= ~(1 << offset);
146 ucb1x00_enable(ucb);
147 ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
148 ucb1x00_disable(ucb);
149 spin_unlock_irqrestore(&ucb->io_lock, flags);
150
151 return 0;
152 }
153
ucb1x00_gpio_direction_output(struct gpio_chip * chip,unsigned offset,int value)154 static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
155 , int value)
156 {
157 struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
158 unsigned long flags;
159 unsigned old, mask = 1 << offset;
160
161 spin_lock_irqsave(&ucb->io_lock, flags);
162 old = ucb->io_out;
163 if (value)
164 ucb->io_out |= mask;
165 else
166 ucb->io_out &= ~mask;
167
168 ucb1x00_enable(ucb);
169 if (old != ucb->io_out)
170 ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
171
172 if (!(ucb->io_dir & mask)) {
173 ucb->io_dir |= mask;
174 ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
175 }
176 ucb1x00_disable(ucb);
177 spin_unlock_irqrestore(&ucb->io_lock, flags);
178
179 return 0;
180 }
181
ucb1x00_to_irq(struct gpio_chip * chip,unsigned offset)182 static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset)
183 {
184 struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
185
186 return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO;
187 }
188
189 /*
190 * UCB1300 data sheet says we must:
191 * 1. enable ADC => 5us (including reference startup time)
192 * 2. select input => 51*tsibclk => 4.3us
193 * 3. start conversion => 102*tsibclk => 8.5us
194 * (tsibclk = 1/11981000)
195 * Period between SIB 128-bit frames = 10.7us
196 */
197
198 /**
199 * ucb1x00_adc_enable - enable the ADC converter
200 * @ucb: UCB1x00 structure describing chip
201 *
202 * Enable the ucb1x00 and ADC converter on the UCB1x00 for use.
203 * Any code wishing to use the ADC converter must call this
204 * function prior to using it.
205 *
206 * This function takes the ADC mutex to prevent two or more
207 * concurrent uses, and therefore may sleep. As a result, it
208 * can only be called from process context, not interrupt
209 * context.
210 *
211 * You should release the ADC as soon as possible using
212 * ucb1x00_adc_disable.
213 */
ucb1x00_adc_enable(struct ucb1x00 * ucb)214 void ucb1x00_adc_enable(struct ucb1x00 *ucb)
215 {
216 mutex_lock(&ucb->adc_mutex);
217
218 ucb->adc_cr |= UCB_ADC_ENA;
219
220 ucb1x00_enable(ucb);
221 ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
222 }
223
224 /**
225 * ucb1x00_adc_read - read the specified ADC channel
226 * @ucb: UCB1x00 structure describing chip
227 * @adc_channel: ADC channel mask
228 * @sync: wait for syncronisation pulse.
229 *
230 * Start an ADC conversion and wait for the result. Note that
231 * synchronised ADC conversions (via the ADCSYNC pin) must wait
232 * until the trigger is asserted and the conversion is finished.
233 *
234 * This function currently spins waiting for the conversion to
235 * complete (2 frames max without sync).
236 *
237 * If called for a synchronised ADC conversion, it may sleep
238 * with the ADC mutex held.
239 */
ucb1x00_adc_read(struct ucb1x00 * ucb,int adc_channel,int sync)240 unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
241 {
242 unsigned int val;
243
244 if (sync)
245 adc_channel |= UCB_ADC_SYNC_ENA;
246
247 ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel);
248 ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel | UCB_ADC_START);
249
250 for (;;) {
251 val = ucb1x00_reg_read(ucb, UCB_ADC_DATA);
252 if (val & UCB_ADC_DAT_VAL)
253 break;
254 /* yield to other processes */
255 set_current_state(TASK_INTERRUPTIBLE);
256 schedule_timeout(1);
257 }
258
259 return UCB_ADC_DAT(val);
260 }
261
262 /**
263 * ucb1x00_adc_disable - disable the ADC converter
264 * @ucb: UCB1x00 structure describing chip
265 *
266 * Disable the ADC converter and release the ADC mutex.
267 */
ucb1x00_adc_disable(struct ucb1x00 * ucb)268 void ucb1x00_adc_disable(struct ucb1x00 *ucb)
269 {
270 ucb->adc_cr &= ~UCB_ADC_ENA;
271 ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
272 ucb1x00_disable(ucb);
273
274 mutex_unlock(&ucb->adc_mutex);
275 }
276
277 /*
278 * UCB1x00 Interrupt handling.
279 *
280 * The UCB1x00 can generate interrupts when the SIBCLK is stopped.
281 * Since we need to read an internal register, we must re-enable
282 * SIBCLK to talk to the chip. We leave the clock running until
283 * we have finished processing all interrupts from the chip.
284 */
ucb1x00_irq(unsigned int irq,struct irq_desc * desc)285 static void ucb1x00_irq(unsigned int irq, struct irq_desc *desc)
286 {
287 struct ucb1x00 *ucb = irq_desc_get_handler_data(desc);
288 unsigned int isr, i;
289
290 ucb1x00_enable(ucb);
291 isr = ucb1x00_reg_read(ucb, UCB_IE_STATUS);
292 ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr);
293 ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
294
295 for (i = 0; i < 16 && isr; i++, isr >>= 1, irq++)
296 if (isr & 1)
297 generic_handle_irq(ucb->irq_base + i);
298 ucb1x00_disable(ucb);
299 }
300
ucb1x00_irq_update(struct ucb1x00 * ucb,unsigned mask)301 static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask)
302 {
303 ucb1x00_enable(ucb);
304 if (ucb->irq_ris_enbl & mask)
305 ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
306 ucb->irq_mask);
307 if (ucb->irq_fal_enbl & mask)
308 ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
309 ucb->irq_mask);
310 ucb1x00_disable(ucb);
311 }
312
ucb1x00_irq_noop(struct irq_data * data)313 static void ucb1x00_irq_noop(struct irq_data *data)
314 {
315 }
316
ucb1x00_irq_mask(struct irq_data * data)317 static void ucb1x00_irq_mask(struct irq_data *data)
318 {
319 struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
320 unsigned mask = 1 << (data->irq - ucb->irq_base);
321
322 raw_spin_lock(&ucb->irq_lock);
323 ucb->irq_mask &= ~mask;
324 ucb1x00_irq_update(ucb, mask);
325 raw_spin_unlock(&ucb->irq_lock);
326 }
327
ucb1x00_irq_unmask(struct irq_data * data)328 static void ucb1x00_irq_unmask(struct irq_data *data)
329 {
330 struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
331 unsigned mask = 1 << (data->irq - ucb->irq_base);
332
333 raw_spin_lock(&ucb->irq_lock);
334 ucb->irq_mask |= mask;
335 ucb1x00_irq_update(ucb, mask);
336 raw_spin_unlock(&ucb->irq_lock);
337 }
338
ucb1x00_irq_set_type(struct irq_data * data,unsigned int type)339 static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type)
340 {
341 struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
342 unsigned mask = 1 << (data->irq - ucb->irq_base);
343
344 raw_spin_lock(&ucb->irq_lock);
345 if (type & IRQ_TYPE_EDGE_RISING)
346 ucb->irq_ris_enbl |= mask;
347 else
348 ucb->irq_ris_enbl &= ~mask;
349
350 if (type & IRQ_TYPE_EDGE_FALLING)
351 ucb->irq_fal_enbl |= mask;
352 else
353 ucb->irq_fal_enbl &= ~mask;
354 if (ucb->irq_mask & mask) {
355 ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
356 ucb->irq_mask);
357 ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
358 ucb->irq_mask);
359 }
360 raw_spin_unlock(&ucb->irq_lock);
361
362 return 0;
363 }
364
ucb1x00_irq_set_wake(struct irq_data * data,unsigned int on)365 static int ucb1x00_irq_set_wake(struct irq_data *data, unsigned int on)
366 {
367 struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
368 struct ucb1x00_plat_data *pdata = ucb->mcp->attached_device.platform_data;
369 unsigned mask = 1 << (data->irq - ucb->irq_base);
370
371 if (!pdata || !pdata->can_wakeup)
372 return -EINVAL;
373
374 raw_spin_lock(&ucb->irq_lock);
375 if (on)
376 ucb->irq_wake |= mask;
377 else
378 ucb->irq_wake &= ~mask;
379 raw_spin_unlock(&ucb->irq_lock);
380
381 return 0;
382 }
383
384 static struct irq_chip ucb1x00_irqchip = {
385 .name = "ucb1x00",
386 .irq_ack = ucb1x00_irq_noop,
387 .irq_mask = ucb1x00_irq_mask,
388 .irq_unmask = ucb1x00_irq_unmask,
389 .irq_set_type = ucb1x00_irq_set_type,
390 .irq_set_wake = ucb1x00_irq_set_wake,
391 };
392
ucb1x00_add_dev(struct ucb1x00 * ucb,struct ucb1x00_driver * drv)393 static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
394 {
395 struct ucb1x00_dev *dev;
396 int ret = -ENOMEM;
397
398 dev = kmalloc(sizeof(struct ucb1x00_dev), GFP_KERNEL);
399 if (dev) {
400 dev->ucb = ucb;
401 dev->drv = drv;
402
403 ret = drv->add(dev);
404
405 if (ret == 0) {
406 list_add_tail(&dev->dev_node, &ucb->devs);
407 list_add_tail(&dev->drv_node, &drv->devs);
408 } else {
409 kfree(dev);
410 }
411 }
412 return ret;
413 }
414
ucb1x00_remove_dev(struct ucb1x00_dev * dev)415 static void ucb1x00_remove_dev(struct ucb1x00_dev *dev)
416 {
417 dev->drv->remove(dev);
418 list_del(&dev->dev_node);
419 list_del(&dev->drv_node);
420 kfree(dev);
421 }
422
423 /*
424 * Try to probe our interrupt, rather than relying on lots of
425 * hard-coded machine dependencies. For reference, the expected
426 * IRQ mappings are:
427 *
428 * Machine Default IRQ
429 * adsbitsy IRQ_GPCIN4
430 * cerf IRQ_GPIO_UCB1200_IRQ
431 * flexanet IRQ_GPIO_GUI
432 * freebird IRQ_GPIO_FREEBIRD_UCB1300_IRQ
433 * graphicsclient ADS_EXT_IRQ(8)
434 * graphicsmaster ADS_EXT_IRQ(8)
435 * lart LART_IRQ_UCB1200
436 * omnimeter IRQ_GPIO23
437 * pfs168 IRQ_GPIO_UCB1300_IRQ
438 * simpad IRQ_GPIO_UCB1300_IRQ
439 * shannon SHANNON_IRQ_GPIO_IRQ_CODEC
440 * yopy IRQ_GPIO_UCB1200_IRQ
441 */
ucb1x00_detect_irq(struct ucb1x00 * ucb)442 static int ucb1x00_detect_irq(struct ucb1x00 *ucb)
443 {
444 unsigned long mask;
445
446 mask = probe_irq_on();
447 if (!mask) {
448 probe_irq_off(mask);
449 return NO_IRQ;
450 }
451
452 /*
453 * Enable the ADC interrupt.
454 */
455 ucb1x00_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
456 ucb1x00_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
457 ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
458 ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
459
460 /*
461 * Cause an ADC interrupt.
462 */
463 ucb1x00_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
464 ucb1x00_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
465
466 /*
467 * Wait for the conversion to complete.
468 */
469 while ((ucb1x00_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VAL) == 0);
470 ucb1x00_reg_write(ucb, UCB_ADC_CR, 0);
471
472 /*
473 * Disable and clear interrupt.
474 */
475 ucb1x00_reg_write(ucb, UCB_IE_RIS, 0);
476 ucb1x00_reg_write(ucb, UCB_IE_FAL, 0);
477 ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
478 ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
479
480 /*
481 * Read triggered interrupt.
482 */
483 return probe_irq_off(mask);
484 }
485
ucb1x00_release(struct device * dev)486 static void ucb1x00_release(struct device *dev)
487 {
488 struct ucb1x00 *ucb = classdev_to_ucb1x00(dev);
489 kfree(ucb);
490 }
491
492 static struct class ucb1x00_class = {
493 .name = "ucb1x00",
494 .dev_release = ucb1x00_release,
495 };
496
ucb1x00_probe(struct mcp * mcp)497 static int ucb1x00_probe(struct mcp *mcp)
498 {
499 struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
500 struct ucb1x00_driver *drv;
501 struct ucb1x00 *ucb;
502 unsigned id, i, irq_base;
503 int ret = -ENODEV;
504
505 /* Tell the platform to deassert the UCB1x00 reset */
506 if (pdata && pdata->reset)
507 pdata->reset(UCB_RST_PROBE);
508
509 mcp_enable(mcp);
510 id = mcp_reg_read(mcp, UCB_ID);
511 mcp_disable(mcp);
512
513 if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
514 printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
515 goto out;
516 }
517
518 ucb = kzalloc(sizeof(struct ucb1x00), GFP_KERNEL);
519 ret = -ENOMEM;
520 if (!ucb)
521 goto out;
522
523 device_initialize(&ucb->dev);
524 ucb->dev.class = &ucb1x00_class;
525 ucb->dev.parent = &mcp->attached_device;
526 dev_set_name(&ucb->dev, "ucb1x00");
527
528 raw_spin_lock_init(&ucb->irq_lock);
529 spin_lock_init(&ucb->io_lock);
530 mutex_init(&ucb->adc_mutex);
531
532 ucb->id = id;
533 ucb->mcp = mcp;
534
535 ret = device_add(&ucb->dev);
536 if (ret)
537 goto err_dev_add;
538
539 ucb1x00_enable(ucb);
540 ucb->irq = ucb1x00_detect_irq(ucb);
541 ucb1x00_disable(ucb);
542 if (ucb->irq == NO_IRQ) {
543 dev_err(&ucb->dev, "IRQ probe failed\n");
544 ret = -ENODEV;
545 goto err_no_irq;
546 }
547
548 ucb->gpio.base = -1;
549 irq_base = pdata ? pdata->irq_base : 0;
550 ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1);
551 if (ucb->irq_base < 0) {
552 dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n",
553 ucb->irq_base);
554 goto err_irq_alloc;
555 }
556
557 for (i = 0; i < 16; i++) {
558 unsigned irq = ucb->irq_base + i;
559
560 irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq);
561 irq_set_chip_data(irq, ucb);
562 set_irq_flags(irq, IRQF_VALID | IRQ_NOREQUEST);
563 }
564
565 irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING);
566 irq_set_handler_data(ucb->irq, ucb);
567 irq_set_chained_handler(ucb->irq, ucb1x00_irq);
568
569 if (pdata && pdata->gpio_base) {
570 ucb->gpio.label = dev_name(&ucb->dev);
571 ucb->gpio.dev = &ucb->dev;
572 ucb->gpio.owner = THIS_MODULE;
573 ucb->gpio.base = pdata->gpio_base;
574 ucb->gpio.ngpio = 10;
575 ucb->gpio.set = ucb1x00_gpio_set;
576 ucb->gpio.get = ucb1x00_gpio_get;
577 ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
578 ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
579 ucb->gpio.to_irq = ucb1x00_to_irq;
580 ret = gpiochip_add(&ucb->gpio);
581 if (ret)
582 goto err_gpio_add;
583 } else
584 dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
585
586 mcp_set_drvdata(mcp, ucb);
587
588 if (pdata)
589 device_set_wakeup_capable(&ucb->dev, pdata->can_wakeup);
590
591 INIT_LIST_HEAD(&ucb->devs);
592 mutex_lock(&ucb1x00_mutex);
593 list_add_tail(&ucb->node, &ucb1x00_devices);
594 list_for_each_entry(drv, &ucb1x00_drivers, node) {
595 ucb1x00_add_dev(ucb, drv);
596 }
597 mutex_unlock(&ucb1x00_mutex);
598
599 return ret;
600
601 err_gpio_add:
602 irq_set_chained_handler(ucb->irq, NULL);
603 err_irq_alloc:
604 if (ucb->irq_base > 0)
605 irq_free_descs(ucb->irq_base, 16);
606 err_no_irq:
607 device_del(&ucb->dev);
608 err_dev_add:
609 put_device(&ucb->dev);
610 out:
611 if (pdata && pdata->reset)
612 pdata->reset(UCB_RST_PROBE_FAIL);
613 return ret;
614 }
615
ucb1x00_remove(struct mcp * mcp)616 static void ucb1x00_remove(struct mcp *mcp)
617 {
618 struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
619 struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
620 struct list_head *l, *n;
621 int ret;
622
623 mutex_lock(&ucb1x00_mutex);
624 list_del(&ucb->node);
625 list_for_each_safe(l, n, &ucb->devs) {
626 struct ucb1x00_dev *dev = list_entry(l, struct ucb1x00_dev, dev_node);
627 ucb1x00_remove_dev(dev);
628 }
629 mutex_unlock(&ucb1x00_mutex);
630
631 if (ucb->gpio.base != -1) {
632 ret = gpiochip_remove(&ucb->gpio);
633 if (ret)
634 dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
635 }
636
637 irq_set_chained_handler(ucb->irq, NULL);
638 irq_free_descs(ucb->irq_base, 16);
639 device_unregister(&ucb->dev);
640
641 if (pdata && pdata->reset)
642 pdata->reset(UCB_RST_REMOVE);
643 }
644
ucb1x00_register_driver(struct ucb1x00_driver * drv)645 int ucb1x00_register_driver(struct ucb1x00_driver *drv)
646 {
647 struct ucb1x00 *ucb;
648
649 INIT_LIST_HEAD(&drv->devs);
650 mutex_lock(&ucb1x00_mutex);
651 list_add_tail(&drv->node, &ucb1x00_drivers);
652 list_for_each_entry(ucb, &ucb1x00_devices, node) {
653 ucb1x00_add_dev(ucb, drv);
654 }
655 mutex_unlock(&ucb1x00_mutex);
656 return 0;
657 }
658
ucb1x00_unregister_driver(struct ucb1x00_driver * drv)659 void ucb1x00_unregister_driver(struct ucb1x00_driver *drv)
660 {
661 struct list_head *n, *l;
662
663 mutex_lock(&ucb1x00_mutex);
664 list_del(&drv->node);
665 list_for_each_safe(l, n, &drv->devs) {
666 struct ucb1x00_dev *dev = list_entry(l, struct ucb1x00_dev, drv_node);
667 ucb1x00_remove_dev(dev);
668 }
669 mutex_unlock(&ucb1x00_mutex);
670 }
671
ucb1x00_suspend(struct device * dev)672 static int ucb1x00_suspend(struct device *dev)
673 {
674 struct ucb1x00_plat_data *pdata = dev->platform_data;
675 struct ucb1x00 *ucb = dev_get_drvdata(dev);
676 struct ucb1x00_dev *udev;
677
678 mutex_lock(&ucb1x00_mutex);
679 list_for_each_entry(udev, &ucb->devs, dev_node) {
680 if (udev->drv->suspend)
681 udev->drv->suspend(udev);
682 }
683 mutex_unlock(&ucb1x00_mutex);
684
685 if (ucb->irq_wake) {
686 unsigned long flags;
687
688 raw_spin_lock_irqsave(&ucb->irq_lock, flags);
689 ucb1x00_enable(ucb);
690 ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
691 ucb->irq_wake);
692 ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
693 ucb->irq_wake);
694 ucb1x00_disable(ucb);
695 raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
696
697 enable_irq_wake(ucb->irq);
698 } else if (pdata && pdata->reset)
699 pdata->reset(UCB_RST_SUSPEND);
700
701 return 0;
702 }
703
ucb1x00_resume(struct device * dev)704 static int ucb1x00_resume(struct device *dev)
705 {
706 struct ucb1x00_plat_data *pdata = dev->platform_data;
707 struct ucb1x00 *ucb = dev_get_drvdata(dev);
708 struct ucb1x00_dev *udev;
709
710 if (!ucb->irq_wake && pdata && pdata->reset)
711 pdata->reset(UCB_RST_RESUME);
712
713 ucb1x00_enable(ucb);
714 ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
715 ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
716
717 if (ucb->irq_wake) {
718 unsigned long flags;
719
720 raw_spin_lock_irqsave(&ucb->irq_lock, flags);
721 ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
722 ucb->irq_mask);
723 ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
724 ucb->irq_mask);
725 raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
726
727 disable_irq_wake(ucb->irq);
728 }
729 ucb1x00_disable(ucb);
730
731 mutex_lock(&ucb1x00_mutex);
732 list_for_each_entry(udev, &ucb->devs, dev_node) {
733 if (udev->drv->resume)
734 udev->drv->resume(udev);
735 }
736 mutex_unlock(&ucb1x00_mutex);
737 return 0;
738 }
739
740 static const struct dev_pm_ops ucb1x00_pm_ops = {
741 SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume)
742 };
743
744 static struct mcp_driver ucb1x00_driver = {
745 .drv = {
746 .name = "ucb1x00",
747 .owner = THIS_MODULE,
748 .pm = &ucb1x00_pm_ops,
749 },
750 .probe = ucb1x00_probe,
751 .remove = ucb1x00_remove,
752 };
753
ucb1x00_init(void)754 static int __init ucb1x00_init(void)
755 {
756 int ret = class_register(&ucb1x00_class);
757 if (ret == 0) {
758 ret = mcp_driver_register(&ucb1x00_driver);
759 if (ret)
760 class_unregister(&ucb1x00_class);
761 }
762 return ret;
763 }
764
ucb1x00_exit(void)765 static void __exit ucb1x00_exit(void)
766 {
767 mcp_driver_unregister(&ucb1x00_driver);
768 class_unregister(&ucb1x00_class);
769 }
770
771 module_init(ucb1x00_init);
772 module_exit(ucb1x00_exit);
773
774 EXPORT_SYMBOL(ucb1x00_io_set_dir);
775 EXPORT_SYMBOL(ucb1x00_io_write);
776 EXPORT_SYMBOL(ucb1x00_io_read);
777
778 EXPORT_SYMBOL(ucb1x00_adc_enable);
779 EXPORT_SYMBOL(ucb1x00_adc_read);
780 EXPORT_SYMBOL(ucb1x00_adc_disable);
781
782 EXPORT_SYMBOL(ucb1x00_register_driver);
783 EXPORT_SYMBOL(ucb1x00_unregister_driver);
784
785 MODULE_ALIAS("mcp:ucb1x00");
786 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
787 MODULE_DESCRIPTION("UCB1x00 core driver");
788 MODULE_LICENSE("GPL");
789