1 /* 2 * Trantor T128/T128F/T228 defines 3 * Note : architecturally, the T100 and T128 are different and won't work 4 * 5 * Copyright 1993, Drew Eckhardt 6 * Visionary Computing 7 * (Unix and Linux consulting and custom programming) 8 * drew@colorado.edu 9 * +1 (303) 440-4894 10 * 11 * DISTRIBUTION RELEASE 3. 12 * 13 * For more information, please consult 14 * 15 * Trantor Systems, Ltd. 16 * T128/T128F/T228 SCSI Host Adapter 17 * Hardware Specifications 18 * 19 * Trantor Systems, Ltd. 20 * 5415 Randall Place 21 * Fremont, CA 94538 22 * 1+ (415) 770-1400, FAX 1+ (415) 770-9910 23 * 24 * and 25 * 26 * NCR 5380 Family 27 * SCSI Protocol Controller 28 * Databook 29 * 30 * NCR Microelectronics 31 * 1635 Aeroplaza Drive 32 * Colorado Springs, CO 80916 33 * 1+ (719) 578-3400 34 * 1+ (800) 334-5454 35 */ 36 37 /* 38 * $Log: t128.h,v $ 39 */ 40 41 #ifndef T128_H 42 #define T128_H 43 44 #define T128_PUBLIC_RELEASE 3 45 46 #define TDEBUG 0 47 #define TDEBUG_INIT 0x1 48 #define TDEBUG_TRANSFER 0x2 49 50 /* 51 * The trantor boards are memory mapped. They use an NCR5380 or 52 * equivalent (my sample board had part second sourced from ZILOG). 53 * NCR's recommended "Pseudo-DMA" architecture is used, where 54 * a PAL drives the DMA signals on the 5380 allowing fast, blind 55 * transfers with proper handshaking. 56 */ 57 58 /* 59 * Note : a boot switch is provided for the purpose of informing the 60 * firmware to boot or not boot from attached SCSI devices. So, I imagine 61 * there are fewer people who've yanked the ROM like they do on the Seagate 62 * to make bootup faster, and I'll probably use this for autodetection. 63 */ 64 #define T_ROM_OFFSET 0 65 66 /* 67 * Note : my sample board *WAS NOT* populated with the SRAM, so this 68 * can't be used for autodetection without a ROM present. 69 */ 70 #define T_RAM_OFFSET 0x1800 71 72 /* 73 * All of the registers are allocated 32 bytes of address space, except 74 * for the data register (read/write to/from the 5380 in pseudo-DMA mode) 75 */ 76 #define T_CONTROL_REG_OFFSET 0x1c00 /* rw */ 77 #define T_CR_INT 0x10 /* Enable interrupts */ 78 #define T_CR_CT 0x02 /* Reset watchdog timer */ 79 80 #define T_STATUS_REG_OFFSET 0x1c20 /* ro */ 81 #define T_ST_BOOT 0x80 /* Boot switch */ 82 #define T_ST_S3 0x40 /* User settable switches, */ 83 #define T_ST_S2 0x20 /* read 0 when switch is on, 1 off */ 84 #define T_ST_S1 0x10 85 #define T_ST_PS2 0x08 /* Set for Microchannel 228 */ 86 #define T_ST_RDY 0x04 /* 5380 DRQ */ 87 #define T_ST_TIM 0x02 /* indicates 40us watchdog timer fired */ 88 #define T_ST_ZERO 0x01 /* Always zero */ 89 90 #define T_5380_OFFSET 0x1d00 /* 8 registers here, see NCR5380.h */ 91 92 #define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */ 93 94 #ifndef ASM 95 static int t128_abort(struct scsi_cmnd *); 96 static int t128_biosparam(struct scsi_device *, struct block_device *, 97 sector_t, int*); 98 static int t128_detect(struct scsi_host_template *); 99 static int t128_queue_command(struct Scsi_Host *, struct scsi_cmnd *); 100 static int t128_bus_reset(struct scsi_cmnd *); 101 102 #ifndef CMD_PER_LUN 103 #define CMD_PER_LUN 2 104 #endif 105 106 #ifndef CAN_QUEUE 107 #define CAN_QUEUE 32 108 #endif 109 110 #ifndef HOSTS_C 111 112 #define NCR5380_implementation_fields \ 113 void __iomem *base 114 115 #define NCR5380_local_declare() \ 116 void __iomem *base 117 118 #define NCR5380_setup(instance) \ 119 base = ((struct NCR5380_hostdata *)(instance->hostdata))->base 120 121 #define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20)) 122 123 #if !(TDEBUG & TDEBUG_TRANSFER) 124 #define NCR5380_read(reg) readb(T128_address(reg)) 125 #define NCR5380_write(reg, value) writeb((value),(T128_address(reg))) 126 #else 127 #define NCR5380_read(reg) \ 128 (((unsigned char) printk("scsi%d : read register %d at address %08x\n"\ 129 , instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg))) 130 131 #define NCR5380_write(reg, value) { \ 132 printk("scsi%d : write %02x to register %d at address %08x\n", \ 133 instance->hostno, (value), (reg), T128_address(reg)); \ 134 writeb((value), (T128_address(reg))); \ 135 } 136 #endif 137 138 #define NCR5380_intr t128_intr 139 #define do_NCR5380_intr do_t128_intr 140 #define NCR5380_queue_command t128_queue_command 141 #define NCR5380_abort t128_abort 142 #define NCR5380_bus_reset t128_bus_reset 143 #define NCR5380_proc_info t128_proc_info 144 145 /* 15 14 12 10 7 5 3 146 1101 0100 1010 1000 */ 147 148 #define T128_IRQS 0xc4a8 149 150 #endif /* else def HOSTS_C */ 151 #endif /* ndef ASM */ 152 #endif /* T128_H */ 153