1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * DTS file for all SPEAr1310 SoCs
4 *
5 * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
6 */
7
8/include/ "spear13xx.dtsi"
9
10/ {
11	compatible = "st,spear1310";
12
13	ahb {
14		spics: spics@e0700000{
15			compatible = "st,spear-spics-gpio";
16			reg = <0xe0700000 0x1000>;
17			st-spics,peripcfg-reg = <0x3b0>;
18			st-spics,sw-enable-bit = <12>;
19			st-spics,cs-value-bit = <11>;
20			st-spics,cs-enable-mask = <3>;
21			st-spics,cs-enable-shift = <8>;
22			gpio-controller;
23			#gpio-cells = <2>;
24		};
25
26		miphy0: miphy@eb800000 {
27			compatible = "st,spear1310-miphy";
28			reg = <0xeb800000 0x4000>;
29			misc = <&misc>;
30			phy-id = <0>;
31			#phy-cells = <1>;
32			status = "disabled";
33		};
34
35		miphy1: miphy@eb804000 {
36			compatible = "st,spear1310-miphy";
37			reg = <0xeb804000 0x4000>;
38			misc = <&misc>;
39			phy-id = <1>;
40			#phy-cells = <1>;
41			status = "disabled";
42		};
43
44		miphy2: miphy@eb808000 {
45			compatible = "st,spear1310-miphy";
46			reg = <0xeb808000 0x4000>;
47			misc = <&misc>;
48			phy-id = <2>;
49			#phy-cells = <1>;
50			status = "disabled";
51		};
52
53		ahci0: ahci@b1000000 {
54			compatible = "snps,spear-ahci";
55			reg = <0xb1000000 0x10000>;
56			interrupts = <0 68 0x4>;
57			phys = <&miphy0 0>;
58			phy-names = "sata-phy";
59			status = "disabled";
60		};
61
62		ahci1: ahci@b1800000 {
63			compatible = "snps,spear-ahci";
64			reg = <0xb1800000 0x10000>;
65			interrupts = <0 69 0x4>;
66			phys = <&miphy1 0>;
67			phy-names = "sata-phy";
68			status = "disabled";
69		};
70
71		ahci2: ahci@b4000000 {
72			compatible = "snps,spear-ahci";
73			reg = <0xb4000000 0x10000>;
74			interrupts = <0 70 0x4>;
75			phys = <&miphy2 0>;
76			phy-names = "sata-phy";
77			status = "disabled";
78		};
79
80		pcie0: pcie@b1000000 {
81			compatible = "st,spear1340-pcie", "snps,dw-pcie";
82			reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
83			reg-names = "dbi", "config";
84			interrupts = <0 68 0x4>;
85			num-lanes = <1>;
86			phys = <&miphy0 1>;
87			phy-names = "pcie-phy";
88			#address-cells = <3>;
89			#size-cells = <2>;
90			device_type = "pci";
91			ranges = <0x81000000 0 0	 0x80020000 0 0x00010000   /* downstream I/O */
92				0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
93			bus-range = <0x00 0xff>;
94			status = "disabled";
95		};
96
97		pcie1: pcie@b1800000 {
98			compatible = "st,spear1340-pcie", "snps,dw-pcie";
99			reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
100			reg-names = "dbi", "config";
101			interrupts = <0 69 0x4>;
102			num-lanes = <1>;
103			phys = <&miphy1 1>;
104			phy-names = "pcie-phy";
105			#address-cells = <3>;
106			#size-cells = <2>;
107			device_type = "pci";
108			ranges = <0x81000000 0 0  0x90020000 0 0x00010000   /* downstream I/O */
109				0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
110			bus-range = <0x00 0xff>;
111			status = "disabled";
112		};
113
114		pcie2: pcie@b4000000 {
115			compatible = "st,spear1340-pcie", "snps,dw-pcie";
116			reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
117			reg-names = "dbi", "config";
118			interrupts = <0 70 0x4>;
119			num-lanes = <1>;
120			phys = <&miphy2 1>;
121			phy-names = "pcie-phy";
122			#address-cells = <3>;
123			#size-cells = <2>;
124			device_type = "pci";
125			ranges = <0x81000000 0 0	 0xc0020000 0 0x00010000   /* downstream I/O */
126				0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
127			bus-range = <0x00 0xff>;
128			status = "disabled";
129		};
130
131		gmac1: eth@5c400000 {
132			compatible = "st,spear600-gmac";
133			reg = <0x5c400000 0x8000>;
134			interrupts = <0 95 0x4>;
135			interrupt-names = "macirq";
136			phy-mode = "mii";
137			status = "disabled";
138		};
139
140		gmac2: eth@5c500000 {
141			compatible = "st,spear600-gmac";
142			reg = <0x5c500000 0x8000>;
143			interrupts = <0 96 0x4>;
144			interrupt-names = "macirq";
145			phy-mode = "mii";
146			status = "disabled";
147		};
148
149		gmac3: eth@5c600000 {
150			compatible = "st,spear600-gmac";
151			reg = <0x5c600000 0x8000>;
152			interrupts = <0 97 0x4>;
153			interrupt-names = "macirq";
154			phy-mode = "rmii";
155			status = "disabled";
156		};
157
158		gmac4: eth@5c700000 {
159			compatible = "st,spear600-gmac";
160			reg = <0x5c700000 0x8000>;
161			interrupts = <0 98 0x4>;
162			interrupt-names = "macirq";
163			phy-mode = "rgmii";
164			status = "disabled";
165		};
166
167		pinmux: pinmux@e0700000 {
168			compatible = "st,spear1310-pinmux";
169			reg = <0xe0700000 0x1000>;
170			#gpio-range-cells = <3>;
171		};
172
173		apb {
174			i2c1: i2c@5cd00000 {
175				#address-cells = <1>;
176				#size-cells = <0>;
177				compatible = "snps,designware-i2c";
178				reg = <0x5cd00000 0x1000>;
179				interrupts = <0 87 0x4>;
180				status = "disabled";
181			};
182
183			i2c2: i2c@5ce00000 {
184				#address-cells = <1>;
185				#size-cells = <0>;
186				compatible = "snps,designware-i2c";
187				reg = <0x5ce00000 0x1000>;
188				interrupts = <0 88 0x4>;
189				status = "disabled";
190			};
191
192			i2c3: i2c@5cf00000 {
193				#address-cells = <1>;
194				#size-cells = <0>;
195				compatible = "snps,designware-i2c";
196				reg = <0x5cf00000 0x1000>;
197				interrupts = <0 89 0x4>;
198				status = "disabled";
199			};
200
201			i2c4: i2c@5d000000 {
202				#address-cells = <1>;
203				#size-cells = <0>;
204				compatible = "snps,designware-i2c";
205				reg = <0x5d000000 0x1000>;
206				interrupts = <0 90 0x4>;
207				status = "disabled";
208			};
209
210			i2c5: i2c@5d100000 {
211				#address-cells = <1>;
212				#size-cells = <0>;
213				compatible = "snps,designware-i2c";
214				reg = <0x5d100000 0x1000>;
215				interrupts = <0 91 0x4>;
216				status = "disabled";
217			};
218
219			i2c6: i2c@5d200000 {
220				#address-cells = <1>;
221				#size-cells = <0>;
222				compatible = "snps,designware-i2c";
223				reg = <0x5d200000 0x1000>;
224				interrupts = <0 92 0x4>;
225				status = "disabled";
226			};
227
228			i2c7: i2c@5d300000 {
229				#address-cells = <1>;
230				#size-cells = <0>;
231				compatible = "snps,designware-i2c";
232				reg = <0x5d300000 0x1000>;
233				interrupts = <0 93 0x4>;
234				status = "disabled";
235			};
236
237			spi1: spi@5d400000 {
238				compatible = "arm,pl022", "arm,primecell";
239				reg = <0x5d400000 0x1000>;
240				interrupts = <0 99 0x4>;
241				#address-cells = <1>;
242				#size-cells = <0>;
243				status = "disabled";
244			};
245
246			serial@5c800000 {
247				compatible = "arm,pl011", "arm,primecell";
248				reg = <0x5c800000 0x1000>;
249				interrupts = <0 82 0x4>;
250				status = "disabled";
251			};
252
253			serial@5c900000 {
254				compatible = "arm,pl011", "arm,primecell";
255				reg = <0x5c900000 0x1000>;
256				interrupts = <0 83 0x4>;
257				status = "disabled";
258			};
259
260			serial@5ca00000 {
261				compatible = "arm,pl011", "arm,primecell";
262				reg = <0x5ca00000 0x1000>;
263				interrupts = <0 84 0x4>;
264				status = "disabled";
265			};
266
267			serial@5cb00000 {
268				compatible = "arm,pl011", "arm,primecell";
269				reg = <0x5cb00000 0x1000>;
270				interrupts = <0 85 0x4>;
271				status = "disabled";
272			};
273
274			serial@5cc00000 {
275				compatible = "arm,pl011", "arm,primecell";
276				reg = <0x5cc00000 0x1000>;
277				interrupts = <0 86 0x4>;
278				status = "disabled";
279			};
280
281			thermal@e07008c4 {
282				st,thermal-flags = <0x7000>;
283			};
284
285			gpiopinctrl: gpio@d8400000 {
286				compatible = "st,spear-plgpio";
287				reg = <0xd8400000 0x1000>;
288				interrupts = <0 100 0x4>;
289				#interrupt-cells = <1>;
290				interrupt-controller;
291				gpio-controller;
292				#gpio-cells = <2>;
293				gpio-ranges = <&pinmux 0 0 246>;
294				status = "disabled";
295
296				st-plgpio,ngpio = <246>;
297				st-plgpio,enb-reg = <0xd0>;
298				st-plgpio,wdata-reg = <0x90>;
299				st-plgpio,dir-reg = <0xb0>;
300				st-plgpio,ie-reg = <0x30>;
301				st-plgpio,rdata-reg = <0x70>;
302				st-plgpio,mis-reg = <0x10>;
303				st-plgpio,eit-reg = <0x50>;
304			};
305		};
306	};
307};
308