1 #ifndef _LINUX_FD_H 2 #define _LINUX_FD_H 3 4 #include <linux/ioctl.h> 5 #include <linux/compiler.h> 6 7 /* New file layout: Now the ioctl definitions immediately follow the 8 * definitions of the structures that they use */ 9 10 /* 11 * Geometry 12 */ 13 struct floppy_struct { 14 unsigned int size, /* nr of sectors total */ 15 sect, /* sectors per track */ 16 head, /* nr of heads */ 17 track, /* nr of tracks */ 18 stretch; /* bit 0 !=0 means double track steps */ 19 /* bit 1 != 0 means swap sides */ 20 /* bits 2..9 give the first sector */ 21 /* number (the LSB is flipped) */ 22 #define FD_STRETCH 1 23 #define FD_SWAPSIDES 2 24 #define FD_ZEROBASED 4 25 #define FD_SECTBASEMASK 0x3FC 26 #define FD_MKSECTBASE(s) (((s) ^ 1) << 2) 27 #define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1) 28 29 unsigned char gap, /* gap1 size */ 30 31 rate, /* data rate. |= 0x40 for perpendicular */ 32 #define FD_2M 0x4 33 #define FD_SIZECODEMASK 0x38 34 #define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8) 35 #define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \ 36 512 : 128 << FD_SIZECODE(floppy) ) 37 #define FD_PERP 0x40 38 39 spec1, /* stepping rate, head unload time */ 40 fmt_gap; /* gap2 size */ 41 const char * name; /* used only for predefined formats */ 42 }; 43 44 45 /* commands needing write access have 0x40 set */ 46 /* commands needing super user access have 0x80 set */ 47 48 #define FDCLRPRM _IO(2, 0x41) 49 /* clear user-defined parameters */ 50 51 #define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 52 #define FDSETMEDIAPRM FDSETPRM 53 /* set user-defined parameters for current media */ 54 55 #define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 56 #define FDGETPRM _IOR(2, 0x04, struct floppy_struct) 57 #define FDDEFMEDIAPRM FDDEFPRM 58 #define FDGETMEDIAPRM FDGETPRM 59 /* set/get disk parameters */ 60 61 62 #define FDMSGON _IO(2,0x45) 63 #define FDMSGOFF _IO(2,0x46) 64 /* issue/don't issue kernel messages on media type change */ 65 66 67 /* 68 * Formatting (obsolete) 69 */ 70 #define FD_FILL_BYTE 0xF6 /* format fill byte. */ 71 72 struct format_descr { 73 unsigned int device,head,track; 74 }; 75 76 #define FDFMTBEG _IO(2,0x47) 77 /* begin formatting a disk */ 78 #define FDFMTTRK _IOW(2,0x48, struct format_descr) 79 /* format the specified track */ 80 #define FDFMTEND _IO(2,0x49) 81 /* end formatting a disk */ 82 83 84 /* 85 * Error thresholds 86 */ 87 struct floppy_max_errors { 88 unsigned int 89 abort, /* number of errors to be reached before aborting */ 90 read_track, /* maximal number of errors permitted to read an 91 * entire track at once */ 92 reset, /* maximal number of errors before a reset is tried */ 93 recal, /* maximal number of errors before a recalibrate is 94 * tried */ 95 96 /* 97 * Threshold for reporting FDC errors to the console. 98 * Setting this to zero may flood your screen when using 99 * ultra cheap floppies ;-) 100 */ 101 reporting; 102 103 }; 104 105 #define FDSETEMSGTRESH _IO(2,0x4a) 106 /* set fdc error reporting threshold */ 107 108 #define FDFLUSH _IO(2,0x4b) 109 /* flush buffers for media; either for verifying media, or for 110 * handling a media change without closing the file descriptor */ 111 112 #define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors) 113 #define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors) 114 /* set/get abortion and read_track threshold. See also floppy_drive_params 115 * structure */ 116 117 118 typedef char floppy_drive_name[16]; 119 #define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name) 120 /* get drive type: 5 1/4 or 3 1/2 */ 121 122 123 /* 124 * Drive parameters (user modifiable) 125 */ 126 struct floppy_drive_params { 127 signed char cmos; /* CMOS type */ 128 129 /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 130 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA). 131 */ 132 unsigned long max_dtr; /* Step rate, usec */ 133 unsigned long hlt; /* Head load/settle time, msec */ 134 unsigned long hut; /* Head unload time (remnant of 135 * 8" drives) */ 136 unsigned long srt; /* Step rate, usec */ 137 138 unsigned long spinup; /* time needed for spinup (expressed 139 * in jiffies) */ 140 unsigned long spindown; /* timeout needed for spindown */ 141 unsigned char spindown_offset; /* decides in which position the disk 142 * will stop */ 143 unsigned char select_delay; /* delay to wait after select */ 144 unsigned char rps; /* rotations per second */ 145 unsigned char tracks; /* maximum number of tracks */ 146 unsigned long timeout; /* timeout for interrupt requests */ 147 148 unsigned char interleave_sect; /* if there are more sectors, use 149 * interleave */ 150 151 struct floppy_max_errors max_errors; 152 153 char flags; /* various flags, including ftd_msg */ 154 /* 155 * Announce successful media type detection and media information loss after 156 * disk changes. 157 * Also used to enable/disable printing of overrun warnings. 158 */ 159 160 #define FTD_MSG 0x10 161 #define FD_BROKEN_DCL 0x20 162 #define FD_DEBUG 0x02 163 #define FD_SILENT_DCL_CLEAR 0x4 164 #define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 165 considerations */ 166 167 char read_track; /* use readtrack during probing? */ 168 169 /* 170 * Auto-detection. Each drive type has eight formats which are 171 * used in succession to try to read the disk. If the FDC cannot lock onto 172 * the disk, the next format is tried. This uses the variable 'probing'. 173 */ 174 short autodetect[8]; /* autodetected formats */ 175 176 int checkfreq; /* how often should the drive be checked for disk 177 * changes */ 178 int native_format; /* native format of this drive */ 179 }; 180 181 enum { 182 FD_NEED_TWADDLE_BIT, /* more magic */ 183 FD_VERIFY_BIT, /* inquire for write protection */ 184 FD_DISK_NEWCHANGE_BIT, /* change detected, and no action undertaken yet 185 * to clear media change status */ 186 FD_UNUSED_BIT, 187 FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */ 188 FD_DISK_WRITABLE_BIT /* disk is writable */ 189 }; 190 191 #define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params) 192 #define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params) 193 /* set/get drive parameters */ 194 195 196 /* 197 * Current drive state (not directly modifiable by user, readonly) 198 */ 199 struct floppy_drive_struct { 200 unsigned long flags; 201 /* values for these flags */ 202 #define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT) 203 #define FD_VERIFY (1 << FD_VERIFY_BIT) 204 #define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT) 205 #define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT) 206 #define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT) 207 208 unsigned long spinup_date; 209 unsigned long select_date; 210 unsigned long first_read_date; 211 short probed_format; 212 short track; /* current track */ 213 short maxblock; /* id of highest block read */ 214 short maxtrack; /* id of highest half track read */ 215 int generation; /* how many diskchanges? */ 216 217 /* 218 * (User-provided) media information is _not_ discarded after a media change 219 * if the corresponding keep_data flag is non-zero. Positive values are 220 * decremented after each probe. 221 */ 222 int keep_data; 223 224 /* Prevent "aliased" accesses. */ 225 int fd_ref; 226 int fd_device; 227 unsigned long last_checked; /* when was the drive last checked for a disk 228 * change? */ 229 230 char *dmabuf; 231 int bufblocks; 232 }; 233 234 #define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct) 235 #define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct) 236 /* get drive state: GET returns the cached state, POLL polls for new state */ 237 238 239 /* 240 * reset FDC 241 */ 242 enum reset_mode { 243 FD_RESET_IF_NEEDED, /* reset only if the reset flags is set */ 244 FD_RESET_IF_RAWCMD, /* obsolete */ 245 FD_RESET_ALWAYS /* reset always */ 246 }; 247 #define FDRESET _IO(2, 0x54) 248 249 250 /* 251 * FDC state 252 */ 253 struct floppy_fdc_state { 254 int spec1; /* spec1 value last used */ 255 int spec2; /* spec2 value last used */ 256 int dtr; 257 unsigned char version; /* FDC version code */ 258 unsigned char dor; 259 unsigned long address; /* io address */ 260 unsigned int rawcmd:2; 261 unsigned int reset:1; 262 unsigned int need_configure:1; 263 unsigned int perp_mode:2; 264 unsigned int has_fifo:1; 265 unsigned int driver_version; /* version code for floppy driver */ 266 #define FD_DRIVER_VERSION 0x100 267 /* user programs using the floppy API should use floppy_fdc_state to 268 * get the version number of the floppy driver that they are running 269 * on. If this version number is bigger than the one compiled into the 270 * user program (the FD_DRIVER_VERSION define), it should be prepared 271 * to bigger structures 272 */ 273 274 unsigned char track[4]; 275 /* Position of the heads of the 4 units attached to this FDC, 276 * as stored on the FDC. In the future, the position as stored 277 * on the FDC might not agree with the actual physical 278 * position of these drive heads. By allowing such 279 * disagreement, it will be possible to reset the FDC without 280 * incurring the expensive cost of repositioning all heads. 281 * Right now, these positions are hard wired to 0. */ 282 283 }; 284 285 #define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state) 286 287 288 /* 289 * Asynchronous Write error tracking 290 */ 291 struct floppy_write_errors { 292 /* Write error logging. 293 * 294 * These fields can be cleared with the FDWERRORCLR ioctl. 295 * Only writes that were attempted but failed due to a physical media 296 * error are logged. write(2) calls that fail and return an error code 297 * to the user process are not counted. 298 */ 299 300 unsigned int write_errors; /* number of physical write errors 301 * encountered */ 302 303 /* position of first and last write errors */ 304 unsigned long first_error_sector; 305 int first_error_generation; 306 unsigned long last_error_sector; 307 int last_error_generation; 308 309 unsigned int badness; /* highest retry count for a read or write 310 * operation */ 311 }; 312 313 #define FDWERRORCLR _IO(2, 0x56) 314 /* clear write error and badness information */ 315 #define FDWERRORGET _IOR(2, 0x17, struct floppy_write_errors) 316 /* get write error and badness information */ 317 318 319 /* 320 * Raw commands 321 */ 322 /* new interface flag: now we can do them in batches */ 323 #define FDHAVEBATCHEDRAWCMD 324 325 struct floppy_raw_cmd { 326 unsigned int flags; 327 #define FD_RAW_READ 1 328 #define FD_RAW_WRITE 2 329 #define FD_RAW_NO_MOTOR 4 330 #define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */ 331 #define FD_RAW_INTR 8 /* wait for an interrupt */ 332 #define FD_RAW_SPIN 0x10 /* spin up the disk for this command */ 333 #define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 334 * completion */ 335 #define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */ 336 #define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */ 337 338 /* more "in" flags */ 339 #define FD_RAW_MORE 0x100 /* more records follow */ 340 #define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */ 341 #define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */ 342 #define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure 343 * detection too */ 344 345 /* more "out" flags */ 346 #define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */ 347 #define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */ 348 349 void __user *data; 350 char *kernel_data; /* location of data buffer in the kernel */ 351 struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 352 * within the kernel */ 353 long length; /* in: length of dma transfer. out: remaining bytes */ 354 long phys_length; /* physical length, if different from dma length */ 355 int buffer_length; /* length of allocated buffer */ 356 357 unsigned char rate; 358 unsigned char cmd_count; 359 unsigned char cmd[16]; 360 unsigned char reply_count; 361 unsigned char reply[16]; 362 int track; 363 int resultcode; 364 365 int reserved1; 366 int reserved2; 367 }; 368 369 #define FDRAWCMD _IO(2, 0x58) 370 /* send a raw command to the fdc. Structure size not included, because of 371 * batches */ 372 373 #define FDTWADDLE _IO(2, 0x59) 374 /* flicker motor-on bit before reading a sector. Experimental */ 375 376 377 #define FDEJECT _IO(2, 0x5a) 378 /* eject the disk */ 379 380 #endif 381