1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9#include <dt-bindings/sound/fsl-imx-audmux.h>
10
11/ {
12	/* these are used by bootloader for disabling nodes */
13	aliases {
14		led0 = &led0;
15		led1 = &led1;
16		led2 = &led2;
17		nand = &gpmi;
18		ssi0 = &ssi1;
19		usb0 = &usbh1;
20		usb1 = &usbotg;
21	};
22
23	chosen {
24		bootargs = "console=ttymxc1,115200";
25	};
26
27	backlight {
28		compatible = "pwm-backlight";
29		pwms = <&pwm4 0 5000000>;
30		brightness-levels = <0 4 8 16 32 64 128 255>;
31		default-brightness-level = <7>;
32	};
33
34	gpio-keys {
35		compatible = "gpio-keys";
36
37		user-pb {
38			label = "user_pb";
39			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
40			linux,code = <BTN_0>;
41		};
42
43		user-pb1x {
44			label = "user_pb1x";
45			linux,code = <BTN_1>;
46			interrupt-parent = <&gsc>;
47			interrupts = <0>;
48		};
49
50		key-erased {
51			label = "key-erased";
52			linux,code = <BTN_2>;
53			interrupt-parent = <&gsc>;
54			interrupts = <1>;
55		};
56
57		eeprom-wp {
58			label = "eeprom_wp";
59			linux,code = <BTN_3>;
60			interrupt-parent = <&gsc>;
61			interrupts = <2>;
62		};
63
64		tamper {
65			label = "tamper";
66			linux,code = <BTN_4>;
67			interrupt-parent = <&gsc>;
68			interrupts = <5>;
69		};
70
71		switch-hold {
72			label = "switch_hold";
73			linux,code = <BTN_5>;
74			interrupt-parent = <&gsc>;
75			interrupts = <7>;
76		};
77	};
78
79	leds {
80		compatible = "gpio-leds";
81		pinctrl-names = "default";
82		pinctrl-0 = <&pinctrl_gpio_leds>;
83
84		led0: user1 {
85			label = "user1";
86			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
87			default-state = "on";
88			linux,default-trigger = "heartbeat";
89		};
90
91		led1: user2 {
92			label = "user2";
93			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
94			default-state = "off";
95		};
96
97		led2: user3 {
98			label = "user3";
99			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
100			default-state = "off";
101		};
102	};
103
104	memory@10000000 {
105		device_type = "memory";
106		reg = <0x10000000 0x40000000>;
107	};
108
109	pps {
110		compatible = "pps-gpio";
111		pinctrl-names = "default";
112		pinctrl-0 = <&pinctrl_pps>;
113		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
114		status = "okay";
115	};
116
117	regulators {
118		compatible = "simple-bus";
119		#address-cells = <1>;
120		#size-cells = <0>;
121
122		reg_1p0v: regulator@0 {
123			compatible = "regulator-fixed";
124			reg = <0>;
125			regulator-name = "1P0V";
126			regulator-min-microvolt = <1000000>;
127			regulator-max-microvolt = <1000000>;
128			regulator-always-on;
129		};
130
131		reg_3p3v: regulator@1 {
132			compatible = "regulator-fixed";
133			reg = <1>;
134			regulator-name = "3P3V";
135			regulator-min-microvolt = <3300000>;
136			regulator-max-microvolt = <3300000>;
137			regulator-always-on;
138		};
139
140		reg_can1_stby: regulator-can1-stby {
141			compatible = "regulator-fixed";
142			pinctrl-names = "default";
143			pinctrl-0 = <&pinctrl_reg_can1>;
144			regulator-name = "can1_stby";
145			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
146			regulator-min-microvolt = <3300000>;
147			regulator-max-microvolt = <3300000>;
148		};
149
150		reg_usb_h1_vbus: regulator@2 {
151			compatible = "regulator-fixed";
152			reg = <2>;
153			regulator-name = "usb_h1_vbus";
154			regulator-min-microvolt = <5000000>;
155			regulator-max-microvolt = <5000000>;
156			regulator-always-on;
157		};
158
159		reg_usb_otg_vbus: regulator@3 {
160			compatible = "regulator-fixed";
161			reg = <3>;
162			regulator-name = "usb_otg_vbus";
163			regulator-min-microvolt = <5000000>;
164			regulator-max-microvolt = <5000000>;
165			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
166			enable-active-high;
167		};
168	};
169
170	sound-analog {
171		compatible = "fsl,imx6q-ventana-sgtl5000",
172			     "fsl,imx-audio-sgtl5000";
173		model = "sgtl5000-audio";
174		ssi-controller = <&ssi1>;
175		audio-codec = <&sgtl5000>;
176		audio-routing =
177			"MIC_IN", "Mic Jack",
178			"Mic Jack", "Mic Bias",
179			"Headphone Jack", "HP_OUT";
180		mux-int-port = <1>;
181		mux-ext-port = <4>;
182	};
183};
184
185&audmux {
186	pinctrl-names = "default";
187	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
188	status = "okay";
189
190	ssi2 {
191		fsl,audmux-port = <1>;
192		fsl,port-config = <
193			(IMX_AUDMUX_V2_PTCR_TFSDIR |
194			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
195			IMX_AUDMUX_V2_PTCR_TCLKDIR |
196			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
197			IMX_AUDMUX_V2_PTCR_SYN)
198			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
199		>;
200	};
201
202	aud5 {
203		fsl,audmux-port = <4>;
204		fsl,port-config = <
205			IMX_AUDMUX_V2_PTCR_SYN
206			IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
207	};
208};
209
210&can1 {
211	pinctrl-names = "default";
212	pinctrl-0 = <&pinctrl_flexcan1>;
213	xceiver-supply = <&reg_can1_stby>;
214	status = "okay";
215};
216
217&clks {
218	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
219			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
220	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
221				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
222};
223
224&ecspi2 {
225	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
226	pinctrl-names = "default";
227	pinctrl-0 = <&pinctrl_ecspi2>;
228	status = "okay";
229};
230
231&fec {
232	pinctrl-names = "default";
233	pinctrl-0 = <&pinctrl_enet>;
234	phy-mode = "rgmii-id";
235	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
236	status = "okay";
237};
238
239&gpmi {
240	pinctrl-names = "default";
241	pinctrl-0 = <&pinctrl_gpmi_nand>;
242	status = "okay";
243};
244
245&hdmi {
246	ddc-i2c-bus = <&i2c3>;
247	status = "okay";
248};
249
250&i2c1 {
251	clock-frequency = <100000>;
252	pinctrl-names = "default";
253	pinctrl-0 = <&pinctrl_i2c1>;
254	status = "okay";
255
256	gsc: gsc@20 {
257		compatible = "gw,gsc";
258		reg = <0x20>;
259		interrupt-parent = <&gpio1>;
260		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
261		interrupt-controller;
262		#interrupt-cells = <1>;
263		#address-cells = <1>;
264		#size-cells = <0>;
265
266		adc {
267			compatible = "gw,gsc-adc";
268			#address-cells = <1>;
269			#size-cells = <0>;
270
271			channel@0 {
272				gw,mode = <0>;
273				reg = <0x00>;
274				label = "temp";
275			};
276
277			channel@2 {
278				gw,mode = <1>;
279				reg = <0x02>;
280				label = "vdd_vin";
281			};
282
283			channel@5 {
284				gw,mode = <1>;
285				reg = <0x05>;
286				label = "vdd_3p3";
287			};
288
289			channel@8 {
290				gw,mode = <1>;
291				reg = <0x08>;
292				label = "vdd_bat";
293			};
294
295			channel@b {
296				gw,mode = <1>;
297				reg = <0x0b>;
298				label = "vdd_5p0";
299			};
300
301			channel@e {
302				gw,mode = <1>;
303				reg = <0xe>;
304				label = "vdd_arm";
305			};
306
307			channel@11 {
308				gw,mode = <1>;
309				reg = <0x11>;
310				label = "vdd_soc";
311			};
312
313			channel@14 {
314				gw,mode = <1>;
315				reg = <0x14>;
316				label = "vdd_3p0";
317			};
318
319			channel@17 {
320				gw,mode = <1>;
321				reg = <0x17>;
322				label = "vdd_1p5";
323			};
324
325			channel@1d {
326				gw,mode = <1>;
327				reg = <0x1d>;
328				label = "vdd_1p8";
329			};
330
331			channel@20 {
332				gw,mode = <1>;
333				reg = <0x20>;
334				label = "vdd_1p0";
335			};
336
337			channel@23 {
338				gw,mode = <1>;
339				reg = <0x23>;
340				label = "vdd_2p5";
341			};
342
343			channel@26 {
344				gw,mode = <1>;
345				reg = <0x26>;
346				label = "vdd_gps";
347			};
348		};
349
350		fan-controller@2c {
351			compatible = "gw,gsc-fan";
352			#address-cells = <1>;
353			#size-cells = <0>;
354			reg = <0x2c>;
355		};
356	};
357
358	gsc_gpio: gpio@23 {
359		compatible = "nxp,pca9555";
360		reg = <0x23>;
361		gpio-controller;
362		#gpio-cells = <2>;
363		interrupt-parent = <&gsc>;
364		interrupts = <4>;
365	};
366
367	eeprom1: eeprom@50 {
368		compatible = "atmel,24c02";
369		reg = <0x50>;
370		pagesize = <16>;
371	};
372
373	eeprom2: eeprom@51 {
374		compatible = "atmel,24c02";
375		reg = <0x51>;
376		pagesize = <16>;
377	};
378
379	eeprom3: eeprom@52 {
380		compatible = "atmel,24c02";
381		reg = <0x52>;
382		pagesize = <16>;
383	};
384
385	eeprom4: eeprom@53 {
386		compatible = "atmel,24c02";
387		reg = <0x53>;
388		pagesize = <16>;
389	};
390
391	rtc: ds1672@68 {
392		compatible = "dallas,ds1672";
393		reg = <0x68>;
394	};
395};
396
397&i2c2 {
398	clock-frequency = <100000>;
399	pinctrl-names = "default";
400	pinctrl-0 = <&pinctrl_i2c2>;
401	status = "okay";
402
403	pmic: pfuze100@8 {
404		compatible = "fsl,pfuze100";
405		reg = <0x08>;
406
407		regulators {
408			sw1a_reg: sw1ab {
409				regulator-min-microvolt = <300000>;
410				regulator-max-microvolt = <1875000>;
411				regulator-boot-on;
412				regulator-always-on;
413				regulator-ramp-delay = <6250>;
414			};
415
416			sw1c_reg: sw1c {
417				regulator-min-microvolt = <300000>;
418				regulator-max-microvolt = <1875000>;
419				regulator-boot-on;
420				regulator-always-on;
421				regulator-ramp-delay = <6250>;
422			};
423
424			sw2_reg: sw2 {
425				regulator-min-microvolt = <800000>;
426				regulator-max-microvolt = <3950000>;
427				regulator-boot-on;
428				regulator-always-on;
429			};
430
431			sw3a_reg: sw3a {
432				regulator-min-microvolt = <400000>;
433				regulator-max-microvolt = <1975000>;
434				regulator-boot-on;
435				regulator-always-on;
436			};
437
438			sw3b_reg: sw3b {
439				regulator-min-microvolt = <400000>;
440				regulator-max-microvolt = <1975000>;
441				regulator-boot-on;
442				regulator-always-on;
443			};
444
445			sw4_reg: sw4 {
446				regulator-min-microvolt = <800000>;
447				regulator-max-microvolt = <3300000>;
448			};
449
450			swbst_reg: swbst {
451				regulator-min-microvolt = <5000000>;
452				regulator-max-microvolt = <5150000>;
453				regulator-boot-on;
454				regulator-always-on;
455			};
456
457			snvs_reg: vsnvs {
458				regulator-min-microvolt = <1000000>;
459				regulator-max-microvolt = <3000000>;
460				regulator-boot-on;
461				regulator-always-on;
462			};
463
464			vref_reg: vrefddr {
465				regulator-boot-on;
466				regulator-always-on;
467			};
468
469			vgen1_reg: vgen1 {
470				regulator-min-microvolt = <800000>;
471				regulator-max-microvolt = <1550000>;
472			};
473
474			vgen2_reg: vgen2 {
475				regulator-min-microvolt = <800000>;
476				regulator-max-microvolt = <1550000>;
477			};
478
479			vgen3_reg: vgen3 {
480				regulator-min-microvolt = <1800000>;
481				regulator-max-microvolt = <3300000>;
482			};
483
484			vgen4_reg: vgen4 {
485				regulator-min-microvolt = <1800000>;
486				regulator-max-microvolt = <3300000>;
487				regulator-always-on;
488			};
489
490			vgen5_reg: vgen5 {
491				regulator-min-microvolt = <1800000>;
492				regulator-max-microvolt = <3300000>;
493				regulator-always-on;
494			};
495
496			vgen6_reg: vgen6 {
497				regulator-min-microvolt = <1800000>;
498				regulator-max-microvolt = <3300000>;
499				regulator-always-on;
500			};
501		};
502	};
503};
504
505&i2c3 {
506	clock-frequency = <100000>;
507	pinctrl-names = "default";
508	pinctrl-0 = <&pinctrl_i2c3>;
509	status = "okay";
510
511	sgtl5000: audio-codec@a {
512		compatible = "fsl,sgtl5000";
513		reg = <0x0a>;
514		clocks = <&clks IMX6QDL_CLK_CKO>;
515		VDDA-supply = <&sw4_reg>;
516		VDDIO-supply = <&reg_3p3v>;
517	};
518
519	touchscreen: egalax_ts@4 {
520		compatible = "eeti,egalax_ts";
521		reg = <0x04>;
522		interrupt-parent = <&gpio7>;
523		interrupts = <12 2>;
524		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
525	};
526
527	accel@1e {
528		compatible = "nxp,fxos8700";
529		reg = <0x1e>;
530	};
531};
532
533&ldb {
534	status = "okay";
535
536	lvds-channel@0 {
537		fsl,data-mapping = "spwg";
538		fsl,data-width = <18>;
539		status = "okay";
540
541		display-timings {
542			native-mode = <&timing0>;
543			timing0: hsd100pxn1 {
544				clock-frequency = <65000000>;
545				hactive = <1024>;
546				vactive = <768>;
547				hback-porch = <220>;
548				hfront-porch = <40>;
549				vback-porch = <21>;
550				vfront-porch = <7>;
551				hsync-len = <60>;
552				vsync-len = <10>;
553			};
554		};
555	};
556};
557
558&pcie {
559	pinctrl-names = "default";
560	pinctrl-0 = <&pinctrl_pcie>;
561	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
562	status = "okay";
563};
564
565&pwm1 {
566	pinctrl-names = "default";
567	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
568	status = "disabled";
569};
570
571&pwm2 {
572	pinctrl-names = "default";
573	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
574	status = "disabled";
575};
576
577&pwm3 {
578	pinctrl-names = "default";
579	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
580	status = "disabled";
581};
582
583&pwm4 {
584	#pwm-cells = <2>;
585	pinctrl-names = "default", "state_dio";
586	pinctrl-0 = <&pinctrl_pwm4_backlight>;
587	pinctrl-1 = <&pinctrl_pwm4_dio>;
588	status = "okay";
589};
590
591&ssi1 {
592	status = "okay";
593};
594
595&ssi2 {
596	status = "okay";
597};
598
599&uart1 {
600	pinctrl-names = "default";
601	pinctrl-0 = <&pinctrl_uart1>;
602	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
603	status = "okay";
604};
605
606&uart2 {
607	pinctrl-names = "default";
608	pinctrl-0 = <&pinctrl_uart2>;
609	status = "okay";
610};
611
612&uart5 {
613	pinctrl-names = "default";
614	pinctrl-0 = <&pinctrl_uart5>;
615	status = "okay";
616};
617
618&usbotg {
619	vbus-supply = <&reg_usb_otg_vbus>;
620	pinctrl-names = "default";
621	pinctrl-0 = <&pinctrl_usbotg>;
622	disable-over-current;
623	status = "okay";
624};
625
626&usbh1 {
627	vbus-supply = <&reg_usb_h1_vbus>;
628	status = "okay";
629};
630
631&usdhc3 {
632	pinctrl-names = "default", "state_100mhz", "state_200mhz";
633	pinctrl-0 = <&pinctrl_usdhc3>;
634	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
635	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
636	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
637	vmmc-supply = <&reg_3p3v>;
638	no-1-8-v; /* firmware will remove if board revision supports */
639	status = "okay";
640};
641
642&wdog1 {
643	status = "disabled";
644};
645
646&wdog2 {
647	pinctrl-names = "default";
648	pinctrl-0 = <&pinctrl_wdog>;
649	fsl,ext-reset-output;
650	status = "okay";
651};
652
653&iomuxc {
654	pinctrl_audmux: audmuxgrp {
655		fsl,pins = <
656			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
657			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
658			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
659			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
660			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
661			MX6QDL_PAD_EIM_D25__AUD5_RXC            0x130b0
662			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD        0x130b0
663			MX6QDL_PAD_EIM_D24__AUD5_RXFS           0x130b0
664		>;
665	};
666
667	pinctrl_enet: enetgrp {
668		fsl,pins = <
669			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
670			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
671			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
672			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
673			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
674			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
675			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
676			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
677			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
678			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
679			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
680			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
681			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
682			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
683			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
684			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
685		>;
686	};
687
688	pinctrl_ecspi2: escpi2grp {
689		fsl,pins = <
690			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
691			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
692			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
693			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
694		>;
695	};
696
697	pinctrl_flexcan1: flexcan1grp {
698		fsl,pins = <
699			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
700			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
701		>;
702	};
703
704	pinctrl_gpio_leds: gpioledsgrp {
705		fsl,pins = <
706			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
707			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
708			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
709		>;
710	};
711
712	pinctrl_gpmi_nand: gpminandgrp {
713		fsl,pins = <
714			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
715			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
716			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
717			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
718			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
719			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
720			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
721			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
722			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
723			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
724			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
725			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
726			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
727			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
728			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
729		>;
730	};
731
732	pinctrl_i2c1: i2c1grp {
733		fsl,pins = <
734			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
735			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
736			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
737		>;
738	};
739
740	pinctrl_i2c2: i2c2grp {
741		fsl,pins = <
742			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
743			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
744		>;
745	};
746
747	pinctrl_i2c3: i2c3grp {
748		fsl,pins = <
749			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
750			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
751		>;
752	};
753
754	pinctrl_pcie: pciegrp {
755		fsl,pins = <
756			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
757			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
758		>;
759	};
760
761	pinctrl_pps: ppsgrp {
762		fsl,pins = <
763			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
764		>;
765	};
766
767	pinctrl_pwm1: pwm1grp {
768		fsl,pins = <
769			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
770		>;
771	};
772
773	pinctrl_pwm2: pwm2grp {
774		fsl,pins = <
775			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
776		>;
777	};
778
779	pinctrl_pwm3: pwm3grp {
780		fsl,pins = <
781			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
782		>;
783	};
784
785	pinctrl_pwm4_backlight: pwm4grpbacklight {
786		fsl,pins = <
787			/* LVDS_PWM J6.5 */
788			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
789		>;
790	};
791
792	pinctrl_pwm4_dio: pwm4grpdio {
793		fsl,pins = <
794			/* DIO3 J16.4 */
795			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
796		>;
797	};
798
799	pinctrl_reg_can1: regcan1grp {
800		fsl,pins = <
801			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
802		>;
803	};
804
805	pinctrl_uart1: uart1grp {
806		fsl,pins = <
807			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
808			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
809			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
810		>;
811	};
812
813	pinctrl_uart2: uart2grp {
814		fsl,pins = <
815			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
816			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
817		>;
818	};
819
820	pinctrl_uart5: uart5grp {
821		fsl,pins = <
822			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
823			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
824		>;
825	};
826
827	pinctrl_usbotg: usbotggrp {
828		fsl,pins = <
829			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
830			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
831			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
832		>;
833	};
834
835	pinctrl_usdhc3: usdhc3grp {
836		fsl,pins = <
837			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
838			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
839			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
840			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
841			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
842			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
843			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
844			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
845		>;
846	};
847
848	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
849		fsl,pins = <
850			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
851			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
852			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
853			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
854			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
855			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
856			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
857			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
858		>;
859	};
860
861	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
862		fsl,pins = <
863			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
864			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
865			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
866			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
867			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
868			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
869			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
870			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
871		>;
872	};
873
874	pinctrl_wdog: wdoggrp {
875		fsl,pins = <
876			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
877		>;
878	};
879};
880