1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/slab.h>
28 #include <linux/delay.h>
29 #include <linux/i2c.h>
30 #include <linux/usb.h>
31 #include <media/tuner.h>
32 #include <media/msp3400.h>
33 #include <media/saa7115.h>
34 #include <media/tvp5150.h>
35 #include <media/tvaudio.h>
36 #include <media/mt9v011.h>
37 #include <media/i2c-addr.h>
38 #include <media/tveeprom.h>
39 #include <media/v4l2-common.h>
40 #include <media/v4l2-chip-ident.h>
41
42 #include "em28xx.h"
43
44 #define DRIVER_NAME "em28xx"
45
46 static int tuner = -1;
47 module_param(tuner, int, 0444);
48 MODULE_PARM_DESC(tuner, "tuner type");
49
50 static unsigned int disable_ir;
51 module_param(disable_ir, int, 0444);
52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
53
54 static unsigned int disable_usb_speed_check;
55 module_param(disable_usb_speed_check, int, 0444);
56 MODULE_PARM_DESC(disable_usb_speed_check,
57 "override min bandwidth requirement of 480M bps");
58
59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
60 module_param_array(card, int, NULL, 0444);
61 MODULE_PARM_DESC(card, "card type");
62
63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
64 static unsigned long em28xx_devused;
65
66 struct em28xx_hash_table {
67 unsigned long hash;
68 unsigned int model;
69 unsigned int tuner;
70 };
71
72 /*
73 * Reset sequences for analog/digital modes
74 */
75
76 /* Reset for the most [analog] boards */
77 static struct em28xx_reg_seq default_analog[] = {
78 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
79 { -1, -1, -1, -1},
80 };
81
82 /* Reset for the most [digital] boards */
83 static struct em28xx_reg_seq default_digital[] = {
84 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
85 { -1, -1, -1, -1},
86 };
87
88 /* Board Hauppauge WinTV HVR 900 analog */
89 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
90 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
91 {0x05, 0xff, 0x10, 10},
92 { -1, -1, -1, -1},
93 };
94
95 /* Board Hauppauge WinTV HVR 900 digital */
96 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
97 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
98 {EM2880_R04_GPO, 0x04, 0x0f, 10},
99 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
100 { -1, -1, -1, -1},
101 };
102
103 /* Board Hauppauge WinTV HVR 900 (R2) digital */
104 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
105 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
106 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
107 { -1, -1, -1, -1},
108 };
109
110 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
111 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
112 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
113 { -1, -1, -1, -1},
114 };
115
116 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
117
118 /* Board - EM2870 Kworld 355u
119 Analog - No input analog */
120
121 /* Board - EM2882 Kworld 315U digital */
122 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
123 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
124 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
125 {EM2880_R04_GPO, 0x04, 0xff, 10},
126 {EM2880_R04_GPO, 0x0c, 0xff, 10},
127 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
128 { -1, -1, -1, -1},
129 };
130
131 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
132 {EM2880_R04_GPO, 0x08, 0xff, 10},
133 {EM2880_R04_GPO, 0x0c, 0xff, 10},
134 {EM2880_R04_GPO, 0x08, 0xff, 10},
135 {EM2880_R04_GPO, 0x0c, 0xff, 10},
136 { -1, -1, -1, -1},
137 };
138
139 static struct em28xx_reg_seq kworld_330u_analog[] = {
140 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
141 {EM2880_R04_GPO, 0x00, 0xff, 10},
142 { -1, -1, -1, -1},
143 };
144
145 static struct em28xx_reg_seq kworld_330u_digital[] = {
146 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
147 {EM2880_R04_GPO, 0x08, 0xff, 10},
148 { -1, -1, -1, -1},
149 };
150
151 /* Evga inDtube
152 GPIO0 - Enable digital power (s5h1409) - low to enable
153 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
154 GPIO4 - xc3028 reset
155 GOP3 - s5h1409 reset
156 */
157 static struct em28xx_reg_seq evga_indtube_analog[] = {
158 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
159 { -1, -1, -1, -1},
160 };
161
162 static struct em28xx_reg_seq evga_indtube_digital[] = {
163 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
164 {EM2880_R04_GPO, 0x04, 0xff, 10},
165 {EM2880_R04_GPO, 0x0c, 0xff, 1},
166 { -1, -1, -1, -1},
167 };
168
169 /*
170 * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
171 * EM_GPIO_0 - currently unknown
172 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
173 * EM_GPIO_2 - currently unknown
174 * EM_GPIO_3 - currently unknown
175 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
176 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
177 * EM_GPIO_6 - currently unknown
178 * EM_GPIO_7 - currently unknown
179 */
180 static struct em28xx_reg_seq kworld_a340_digital[] = {
181 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
182 { -1, -1, -1, -1},
183 };
184
185 /* Pinnacle Hybrid Pro eb1a:2881 */
186 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
187 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
188 { -1, -1, -1, -1},
189 };
190
191 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
192 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
193 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
194 {EM2880_R04_GPO, 0x0c, 0xff, 1},
195 { -1, -1, -1, -1},
196 };
197
198 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
199 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
200 {EM2880_R04_GPO, 0x00, 0xff, 10},
201 { -1, -1, -1, -1},
202 };
203
204 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
205 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
206 {EM2880_R04_GPO, 0x08, 0xff, 10},
207 { -1, -1, -1, -1},
208 };
209
210 /* eb1a:2868 Reddo DVB-C USB TV Box
211 GPIO4 - CU1216L NIM
212 Other GPIOs seems to be don't care. */
213 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
214 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
215 {EM28XX_R08_GPIO, 0xde, 0xff, 10},
216 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
217 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
218 {EM28XX_R08_GPIO, 0x7f, 0xff, 10},
219 {EM28XX_R08_GPIO, 0x6f, 0xff, 10},
220 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
221 {-1, -1, -1, -1},
222 };
223
224 /* Callback for the most boards */
225 static struct em28xx_reg_seq default_tuner_gpio[] = {
226 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
227 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
228 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
229 { -1, -1, -1, -1},
230 };
231
232 /* Mute/unmute */
233 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
234 {EM28XX_R08_GPIO, 5, 7, 10},
235 { -1, -1, -1, -1},
236 };
237
238 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
239 {EM28XX_R08_GPIO, 4, 7, 10},
240 { -1, -1, -1, -1},
241 };
242
243 static struct em28xx_reg_seq compro_mute_gpio[] = {
244 {EM28XX_R08_GPIO, 6, 7, 10},
245 { -1, -1, -1, -1},
246 };
247
248 /* Terratec AV350 */
249 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
250 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
251 { -1, -1, -1, -1},
252 };
253
254 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
255 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
256 { -1, -1, -1, -1},
257 };
258
259 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
260 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
261 {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
262 { -1, -1, -1, -1},
263 };
264
265 static struct em28xx_reg_seq vc211a_enable[] = {
266 {EM28XX_R08_GPIO, 0xff, 0x07, 10},
267 {EM28XX_R08_GPIO, 0xff, 0x0f, 10},
268 {EM28XX_R08_GPIO, 0xff, 0x0b, 10},
269 { -1, -1, -1, -1},
270 };
271
272 static struct em28xx_reg_seq dikom_dk300_digital[] = {
273 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
274 {EM2880_R04_GPO, 0x08, 0xff, 10},
275 { -1, -1, -1, -1},
276 };
277
278
279 /* Reset for the most [digital] boards */
280 static struct em28xx_reg_seq leadership_digital[] = {
281 {EM2874_R80_GPIO, 0x70, 0xff, 10},
282 { -1, -1, -1, -1},
283 };
284
285 static struct em28xx_reg_seq leadership_reset[] = {
286 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
287 {EM2874_R80_GPIO, 0xb0, 0xff, 10},
288 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
289 { -1, -1, -1, -1},
290 };
291
292 /* 2013:024f PCTV nanoStick T2 290e
293 * GPIO_6 - demod reset
294 * GPIO_7 - LED
295 */
296 static struct em28xx_reg_seq pctv_290e[] = {
297 {EM2874_R80_GPIO, 0x00, 0xff, 80},
298 {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
299 {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
300 {-1, -1, -1, -1},
301 };
302
303 #if 0
304 static struct em28xx_reg_seq terratec_h5_gpio[] = {
305 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
306 {EM2874_R80_GPIO, 0xf6, 0xff, 100},
307 {EM2874_R80_GPIO, 0xf2, 0xff, 50},
308 {EM2874_R80_GPIO, 0xf6, 0xff, 50},
309 { -1, -1, -1, -1},
310 };
311
312 static struct em28xx_reg_seq terratec_h5_digital[] = {
313 {EM2874_R80_GPIO, 0xf6, 0xff, 10},
314 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
315 {EM2874_R80_GPIO, 0xa6, 0xff, 10},
316 { -1, -1, -1, -1},
317 };
318 #endif
319
320 /* 2013:024f PCTV DVB-S2 Stick 460e
321 * GPIO_0 - POWER_ON
322 * GPIO_1 - BOOST
323 * GPIO_2 - VUV_LNB (red LED)
324 * GPIO_3 - EXT_12V
325 * GPIO_4 - INT_DEM (DEMOD GPIO_0)
326 * GPIO_5 - INT_LNB
327 * GPIO_6 - RESET_DEM
328 * GPIO_7 - LED (green LED)
329 */
330 static struct em28xx_reg_seq pctv_460e[] = {
331 {EM2874_R80_GPIO, 0x01, 0xff, 50},
332 {0x0d, 0xff, 0xff, 50},
333 {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */
334 {0x0d, 0x42, 0xff, 50},
335 {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */
336 { -1, -1, -1, -1},
337 };
338
339 #if 0
340 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
341 {EM2874_R80_GPIO, 0x6f, 0xff, 10},
342 {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */
343 {EM2874_R80_GPIO, 0x6f, 0xff, 10},
344 {EM2874_R80_GPIO, 0x4f, 0xff, 10},
345 { -1, -1, -1, -1},
346 };
347
348 static struct em28xx_reg_seq hauppauge_930c_digital[] = {
349 {EM2874_R80_GPIO, 0xf6, 0xff, 10},
350 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
351 {EM2874_R80_GPIO, 0xa6, 0xff, 10},
352 { -1, -1, -1, -1},
353 };
354 #endif
355
356 /* 1b80:e425 MaxMedia UB425-TC
357 * GPIO_6 - demod reset, 0=active
358 * GPIO_7 - LED, 0=active
359 */
360 static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
361 {EM2874_R80_GPIO, 0x83, 0xff, 100},
362 {EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
363 {EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
364 {-1, -1, -1, -1},
365 };
366
367 /* 2304:0242 PCTV QuatroStick (510e)
368 * GPIO_2: decoder reset, 0=active
369 * GPIO_4: decoder suspend, 0=active
370 * GPIO_6: demod reset, 0=active
371 * GPIO_7: LED, 1=active
372 */
373 static struct em28xx_reg_seq pctv_510e[] = {
374 {EM2874_R80_GPIO, 0x10, 0xff, 100},
375 {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
376 {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
377 { -1, -1, -1, -1},
378 };
379
380 /* 2013:0251 PCTV QuatroStick nano (520e)
381 * GPIO_2: decoder reset, 0=active
382 * GPIO_4: decoder suspend, 0=active
383 * GPIO_6: demod reset, 0=active
384 * GPIO_7: LED, 1=active
385 */
386 static struct em28xx_reg_seq pctv_520e[] = {
387 {EM2874_R80_GPIO, 0x10, 0xff, 100},
388 {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
389 {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
390 {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
391 { -1, -1, -1, -1},
392 };
393
394 /*
395 * Board definitions
396 */
397 struct em28xx_board em28xx_boards[] = {
398 [EM2750_BOARD_UNKNOWN] = {
399 .name = "EM2710/EM2750/EM2751 webcam grabber",
400 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
401 .tuner_type = TUNER_ABSENT,
402 .is_webcam = 1,
403 .input = { {
404 .type = EM28XX_VMUX_COMPOSITE1,
405 .vmux = 0,
406 .amux = EM28XX_AMUX_VIDEO,
407 .gpio = silvercrest_reg_seq,
408 } },
409 },
410 [EM2800_BOARD_UNKNOWN] = {
411 .name = "Unknown EM2800 video grabber",
412 .is_em2800 = 1,
413 .tda9887_conf = TDA9887_PRESENT,
414 .decoder = EM28XX_SAA711X,
415 .tuner_type = TUNER_ABSENT,
416 .input = { {
417 .type = EM28XX_VMUX_COMPOSITE1,
418 .vmux = SAA7115_COMPOSITE0,
419 .amux = EM28XX_AMUX_LINE_IN,
420 }, {
421 .type = EM28XX_VMUX_SVIDEO,
422 .vmux = SAA7115_SVIDEO3,
423 .amux = EM28XX_AMUX_LINE_IN,
424 } },
425 },
426 [EM2820_BOARD_UNKNOWN] = {
427 .name = "Unknown EM2750/28xx video grabber",
428 .tuner_type = TUNER_ABSENT,
429 .is_webcam = 1, /* To enable sensor probe */
430 },
431 [EM2750_BOARD_DLCW_130] = {
432 /* Beijing Huaqi Information Digital Technology Co., Ltd */
433 .name = "Huaqi DLCW-130",
434 .valid = EM28XX_BOARD_NOT_VALIDATED,
435 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
436 .tuner_type = TUNER_ABSENT,
437 .is_webcam = 1,
438 .input = { {
439 .type = EM28XX_VMUX_COMPOSITE1,
440 .vmux = 0,
441 .amux = EM28XX_AMUX_VIDEO,
442 } },
443 },
444 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
445 .name = "Kworld PVR TV 2800 RF",
446 .tuner_type = TUNER_TEMIC_PAL,
447 .tda9887_conf = TDA9887_PRESENT,
448 .decoder = EM28XX_SAA711X,
449 .input = { {
450 .type = EM28XX_VMUX_COMPOSITE1,
451 .vmux = SAA7115_COMPOSITE0,
452 .amux = EM28XX_AMUX_LINE_IN,
453 }, {
454 .type = EM28XX_VMUX_SVIDEO,
455 .vmux = SAA7115_SVIDEO3,
456 .amux = EM28XX_AMUX_LINE_IN,
457 } },
458 },
459 [EM2820_BOARD_GADMEI_TVR200] = {
460 .name = "Gadmei TVR200",
461 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
462 .tda9887_conf = TDA9887_PRESENT,
463 .decoder = EM28XX_SAA711X,
464 .input = { {
465 .type = EM28XX_VMUX_TELEVISION,
466 .vmux = SAA7115_COMPOSITE2,
467 .amux = EM28XX_AMUX_LINE_IN,
468 }, {
469 .type = EM28XX_VMUX_COMPOSITE1,
470 .vmux = SAA7115_COMPOSITE0,
471 .amux = EM28XX_AMUX_LINE_IN,
472 }, {
473 .type = EM28XX_VMUX_SVIDEO,
474 .vmux = SAA7115_SVIDEO3,
475 .amux = EM28XX_AMUX_LINE_IN,
476 } },
477 },
478 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
479 .name = "Terratec Cinergy 250 USB",
480 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
481 .has_ir_i2c = 1,
482 .tda9887_conf = TDA9887_PRESENT,
483 .decoder = EM28XX_SAA711X,
484 .input = { {
485 .type = EM28XX_VMUX_TELEVISION,
486 .vmux = SAA7115_COMPOSITE2,
487 .amux = EM28XX_AMUX_LINE_IN,
488 }, {
489 .type = EM28XX_VMUX_COMPOSITE1,
490 .vmux = SAA7115_COMPOSITE0,
491 .amux = EM28XX_AMUX_LINE_IN,
492 }, {
493 .type = EM28XX_VMUX_SVIDEO,
494 .vmux = SAA7115_SVIDEO3,
495 .amux = EM28XX_AMUX_LINE_IN,
496 } },
497 },
498 [EM2820_BOARD_PINNACLE_USB_2] = {
499 .name = "Pinnacle PCTV USB 2",
500 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
501 .has_ir_i2c = 1,
502 .tda9887_conf = TDA9887_PRESENT,
503 .decoder = EM28XX_SAA711X,
504 .input = { {
505 .type = EM28XX_VMUX_TELEVISION,
506 .vmux = SAA7115_COMPOSITE2,
507 .amux = EM28XX_AMUX_VIDEO,
508 }, {
509 .type = EM28XX_VMUX_COMPOSITE1,
510 .vmux = SAA7115_COMPOSITE0,
511 .amux = EM28XX_AMUX_LINE_IN,
512 }, {
513 .type = EM28XX_VMUX_SVIDEO,
514 .vmux = SAA7115_SVIDEO3,
515 .amux = EM28XX_AMUX_LINE_IN,
516 } },
517 },
518 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
519 .name = "Hauppauge WinTV USB 2",
520 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
521 .tda9887_conf = TDA9887_PRESENT |
522 TDA9887_PORT1_ACTIVE |
523 TDA9887_PORT2_ACTIVE,
524 .decoder = EM28XX_TVP5150,
525 .has_msp34xx = 1,
526 .has_ir_i2c = 1,
527 .input = { {
528 .type = EM28XX_VMUX_TELEVISION,
529 .vmux = TVP5150_COMPOSITE0,
530 .amux = MSP_INPUT_DEFAULT,
531 }, {
532 .type = EM28XX_VMUX_SVIDEO,
533 .vmux = TVP5150_SVIDEO,
534 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
535 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
536 } },
537 },
538 [EM2820_BOARD_DLINK_USB_TV] = {
539 .name = "D-Link DUB-T210 TV Tuner",
540 .valid = EM28XX_BOARD_NOT_VALIDATED,
541 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
542 .tda9887_conf = TDA9887_PRESENT,
543 .decoder = EM28XX_SAA711X,
544 .input = { {
545 .type = EM28XX_VMUX_TELEVISION,
546 .vmux = SAA7115_COMPOSITE2,
547 .amux = EM28XX_AMUX_LINE_IN,
548 }, {
549 .type = EM28XX_VMUX_COMPOSITE1,
550 .vmux = SAA7115_COMPOSITE0,
551 .amux = EM28XX_AMUX_LINE_IN,
552 }, {
553 .type = EM28XX_VMUX_SVIDEO,
554 .vmux = SAA7115_SVIDEO3,
555 .amux = EM28XX_AMUX_LINE_IN,
556 } },
557 },
558 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
559 .name = "Hercules Smart TV USB 2.0",
560 .valid = EM28XX_BOARD_NOT_VALIDATED,
561 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
562 .tda9887_conf = TDA9887_PRESENT,
563 .decoder = EM28XX_SAA711X,
564 .input = { {
565 .type = EM28XX_VMUX_TELEVISION,
566 .vmux = SAA7115_COMPOSITE2,
567 .amux = EM28XX_AMUX_LINE_IN,
568 }, {
569 .type = EM28XX_VMUX_COMPOSITE1,
570 .vmux = SAA7115_COMPOSITE0,
571 .amux = EM28XX_AMUX_LINE_IN,
572 }, {
573 .type = EM28XX_VMUX_SVIDEO,
574 .vmux = SAA7115_SVIDEO3,
575 .amux = EM28XX_AMUX_LINE_IN,
576 } },
577 },
578 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
579 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
580 .valid = EM28XX_BOARD_NOT_VALIDATED,
581 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
582 .tda9887_conf = TDA9887_PRESENT,
583 .decoder = EM28XX_SAA711X,
584 .input = { {
585 .type = EM28XX_VMUX_TELEVISION,
586 .vmux = SAA7115_COMPOSITE2,
587 .amux = EM28XX_AMUX_VIDEO,
588 }, {
589 .type = EM28XX_VMUX_COMPOSITE1,
590 .vmux = SAA7115_COMPOSITE0,
591 .amux = EM28XX_AMUX_LINE_IN,
592 }, {
593 .type = EM28XX_VMUX_SVIDEO,
594 .vmux = SAA7115_SVIDEO3,
595 .amux = EM28XX_AMUX_LINE_IN,
596 } },
597 },
598 [EM2820_BOARD_GADMEI_UTV310] = {
599 .name = "Gadmei UTV310",
600 .valid = EM28XX_BOARD_NOT_VALIDATED,
601 .tuner_type = TUNER_TNF_5335MF,
602 .tda9887_conf = TDA9887_PRESENT,
603 .decoder = EM28XX_SAA711X,
604 .input = { {
605 .type = EM28XX_VMUX_TELEVISION,
606 .vmux = SAA7115_COMPOSITE1,
607 .amux = EM28XX_AMUX_LINE_IN,
608 }, {
609 .type = EM28XX_VMUX_COMPOSITE1,
610 .vmux = SAA7115_COMPOSITE0,
611 .amux = EM28XX_AMUX_LINE_IN,
612 }, {
613 .type = EM28XX_VMUX_SVIDEO,
614 .vmux = SAA7115_SVIDEO3,
615 .amux = EM28XX_AMUX_LINE_IN,
616 } },
617 },
618 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
619 .name = "Leadtek Winfast USB II Deluxe",
620 .valid = EM28XX_BOARD_NOT_VALIDATED,
621 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
622 .has_ir_i2c = 1,
623 .tvaudio_addr = 0x58,
624 .tda9887_conf = TDA9887_PRESENT |
625 TDA9887_PORT2_ACTIVE |
626 TDA9887_QSS,
627 .decoder = EM28XX_SAA711X,
628 .adecoder = EM28XX_TVAUDIO,
629 .input = { {
630 .type = EM28XX_VMUX_TELEVISION,
631 .vmux = SAA7115_COMPOSITE4,
632 .amux = EM28XX_AMUX_AUX,
633 }, {
634 .type = EM28XX_VMUX_COMPOSITE1,
635 .vmux = SAA7115_COMPOSITE5,
636 .amux = EM28XX_AMUX_LINE_IN,
637 }, {
638 .type = EM28XX_VMUX_SVIDEO,
639 .vmux = SAA7115_SVIDEO3,
640 .amux = EM28XX_AMUX_LINE_IN,
641 } },
642 .radio = {
643 .type = EM28XX_RADIO,
644 .amux = EM28XX_AMUX_AUX,
645 }
646 },
647 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
648 .name = "Videology 20K14XUSB USB2.0",
649 .valid = EM28XX_BOARD_NOT_VALIDATED,
650 .tuner_type = TUNER_ABSENT,
651 .is_webcam = 1,
652 .input = { {
653 .type = EM28XX_VMUX_COMPOSITE1,
654 .vmux = 0,
655 .amux = EM28XX_AMUX_VIDEO,
656 } },
657 },
658 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
659 .name = "Silvercrest Webcam 1.3mpix",
660 .tuner_type = TUNER_ABSENT,
661 .is_webcam = 1,
662 .input = { {
663 .type = EM28XX_VMUX_COMPOSITE1,
664 .vmux = 0,
665 .amux = EM28XX_AMUX_VIDEO,
666 .gpio = silvercrest_reg_seq,
667 } },
668 },
669 [EM2821_BOARD_SUPERCOMP_USB_2] = {
670 .name = "Supercomp USB 2.0 TV",
671 .valid = EM28XX_BOARD_NOT_VALIDATED,
672 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
673 .tda9887_conf = TDA9887_PRESENT |
674 TDA9887_PORT1_ACTIVE |
675 TDA9887_PORT2_ACTIVE,
676 .decoder = EM28XX_SAA711X,
677 .input = { {
678 .type = EM28XX_VMUX_TELEVISION,
679 .vmux = SAA7115_COMPOSITE2,
680 .amux = EM28XX_AMUX_LINE_IN,
681 }, {
682 .type = EM28XX_VMUX_COMPOSITE1,
683 .vmux = SAA7115_COMPOSITE0,
684 .amux = EM28XX_AMUX_VIDEO,
685 }, {
686 .type = EM28XX_VMUX_SVIDEO,
687 .vmux = SAA7115_SVIDEO3,
688 .amux = EM28XX_AMUX_LINE_IN,
689 } },
690 },
691 [EM2821_BOARD_USBGEAR_VD204] = {
692 .name = "Usbgear VD204v9",
693 .valid = EM28XX_BOARD_NOT_VALIDATED,
694 .tuner_type = TUNER_ABSENT, /* Capture only device */
695 .decoder = EM28XX_SAA711X,
696 .input = { {
697 .type = EM28XX_VMUX_COMPOSITE1,
698 .vmux = SAA7115_COMPOSITE0,
699 .amux = EM28XX_AMUX_LINE_IN,
700 }, {
701 .type = EM28XX_VMUX_SVIDEO,
702 .vmux = SAA7115_SVIDEO3,
703 .amux = EM28XX_AMUX_LINE_IN,
704 } },
705 },
706 [EM2860_BOARD_NETGMBH_CAM] = {
707 /* Beijing Huaqi Information Digital Technology Co., Ltd */
708 .name = "NetGMBH Cam",
709 .valid = EM28XX_BOARD_NOT_VALIDATED,
710 .tuner_type = TUNER_ABSENT,
711 .is_webcam = 1,
712 .input = { {
713 .type = EM28XX_VMUX_COMPOSITE1,
714 .vmux = 0,
715 .amux = EM28XX_AMUX_VIDEO,
716 } },
717 },
718 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
719 .name = "Typhoon DVD Maker",
720 .decoder = EM28XX_SAA711X,
721 .tuner_type = TUNER_ABSENT, /* Capture only device */
722 .input = { {
723 .type = EM28XX_VMUX_COMPOSITE1,
724 .vmux = SAA7115_COMPOSITE0,
725 .amux = EM28XX_AMUX_LINE_IN,
726 }, {
727 .type = EM28XX_VMUX_SVIDEO,
728 .vmux = SAA7115_SVIDEO3,
729 .amux = EM28XX_AMUX_LINE_IN,
730 } },
731 },
732 [EM2860_BOARD_GADMEI_UTV330] = {
733 .name = "Gadmei UTV330",
734 .valid = EM28XX_BOARD_NOT_VALIDATED,
735 .tuner_type = TUNER_TNF_5335MF,
736 .tda9887_conf = TDA9887_PRESENT,
737 .decoder = EM28XX_SAA711X,
738 .input = { {
739 .type = EM28XX_VMUX_TELEVISION,
740 .vmux = SAA7115_COMPOSITE2,
741 .amux = EM28XX_AMUX_VIDEO,
742 }, {
743 .type = EM28XX_VMUX_COMPOSITE1,
744 .vmux = SAA7115_COMPOSITE0,
745 .amux = EM28XX_AMUX_LINE_IN,
746 }, {
747 .type = EM28XX_VMUX_SVIDEO,
748 .vmux = SAA7115_SVIDEO3,
749 .amux = EM28XX_AMUX_LINE_IN,
750 } },
751 },
752 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
753 .name = "Gadmei UTV330+",
754 .tuner_type = TUNER_TNF_5335MF,
755 .tda9887_conf = TDA9887_PRESENT,
756 .ir_codes = RC_MAP_GADMEI_RM008Z,
757 .decoder = EM28XX_SAA711X,
758 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
759 .input = { {
760 .type = EM28XX_VMUX_TELEVISION,
761 .vmux = SAA7115_COMPOSITE2,
762 .amux = EM28XX_AMUX_VIDEO,
763 }, {
764 .type = EM28XX_VMUX_COMPOSITE1,
765 .vmux = SAA7115_COMPOSITE0,
766 .amux = EM28XX_AMUX_LINE_IN,
767 }, {
768 .type = EM28XX_VMUX_SVIDEO,
769 .vmux = SAA7115_SVIDEO3,
770 .amux = EM28XX_AMUX_LINE_IN,
771 } },
772 },
773 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
774 .name = "Terratec Cinergy A Hybrid XS",
775 .valid = EM28XX_BOARD_NOT_VALIDATED,
776 .tuner_type = TUNER_XC2028,
777 .tuner_gpio = default_tuner_gpio,
778 .decoder = EM28XX_TVP5150,
779
780 .input = { {
781 .type = EM28XX_VMUX_TELEVISION,
782 .vmux = TVP5150_COMPOSITE0,
783 .amux = EM28XX_AMUX_VIDEO,
784 .gpio = hauppauge_wintv_hvr_900_analog,
785 }, {
786 .type = EM28XX_VMUX_COMPOSITE1,
787 .vmux = TVP5150_COMPOSITE1,
788 .amux = EM28XX_AMUX_LINE_IN,
789 .gpio = hauppauge_wintv_hvr_900_analog,
790 }, {
791 .type = EM28XX_VMUX_SVIDEO,
792 .vmux = TVP5150_SVIDEO,
793 .amux = EM28XX_AMUX_LINE_IN,
794 .gpio = hauppauge_wintv_hvr_900_analog,
795 } },
796 },
797 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
798 .name = "KWorld PVRTV 300U",
799 .valid = EM28XX_BOARD_NOT_VALIDATED,
800 .tuner_type = TUNER_XC2028,
801 .tuner_gpio = default_tuner_gpio,
802 .decoder = EM28XX_TVP5150,
803 .input = { {
804 .type = EM28XX_VMUX_TELEVISION,
805 .vmux = TVP5150_COMPOSITE0,
806 .amux = EM28XX_AMUX_VIDEO,
807 }, {
808 .type = EM28XX_VMUX_COMPOSITE1,
809 .vmux = TVP5150_COMPOSITE1,
810 .amux = EM28XX_AMUX_LINE_IN,
811 }, {
812 .type = EM28XX_VMUX_SVIDEO,
813 .vmux = TVP5150_SVIDEO,
814 .amux = EM28XX_AMUX_LINE_IN,
815 } },
816 },
817 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
818 .name = "Yakumo MovieMixer",
819 .tuner_type = TUNER_ABSENT, /* Capture only device */
820 .decoder = EM28XX_TVP5150,
821 .input = { {
822 .type = EM28XX_VMUX_TELEVISION,
823 .vmux = TVP5150_COMPOSITE0,
824 .amux = EM28XX_AMUX_VIDEO,
825 }, {
826 .type = EM28XX_VMUX_COMPOSITE1,
827 .vmux = TVP5150_COMPOSITE1,
828 .amux = EM28XX_AMUX_LINE_IN,
829 }, {
830 .type = EM28XX_VMUX_SVIDEO,
831 .vmux = TVP5150_SVIDEO,
832 .amux = EM28XX_AMUX_LINE_IN,
833 } },
834 },
835 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
836 .name = "EM2860/TVP5150 Reference Design",
837 .tuner_type = TUNER_ABSENT, /* Capture only device */
838 .decoder = EM28XX_TVP5150,
839 .input = { {
840 .type = EM28XX_VMUX_COMPOSITE1,
841 .vmux = TVP5150_COMPOSITE1,
842 .amux = EM28XX_AMUX_LINE_IN,
843 }, {
844 .type = EM28XX_VMUX_SVIDEO,
845 .vmux = TVP5150_SVIDEO,
846 .amux = EM28XX_AMUX_LINE_IN,
847 } },
848 },
849 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
850 .name = "Plextor ConvertX PX-TV100U",
851 .tuner_type = TUNER_TNF_5335MF,
852 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
853 EM28XX_XCLK_FREQUENCY_12MHZ,
854 .tda9887_conf = TDA9887_PRESENT,
855 .decoder = EM28XX_TVP5150,
856 .has_msp34xx = 1,
857 .input = { {
858 .type = EM28XX_VMUX_TELEVISION,
859 .vmux = TVP5150_COMPOSITE0,
860 .amux = EM28XX_AMUX_LINE_IN,
861 .gpio = pinnacle_hybrid_pro_analog,
862 }, {
863 .type = EM28XX_VMUX_COMPOSITE1,
864 .vmux = TVP5150_COMPOSITE1,
865 .amux = EM28XX_AMUX_LINE_IN,
866 .gpio = pinnacle_hybrid_pro_analog,
867 }, {
868 .type = EM28XX_VMUX_SVIDEO,
869 .vmux = TVP5150_SVIDEO,
870 .amux = EM28XX_AMUX_LINE_IN,
871 .gpio = pinnacle_hybrid_pro_analog,
872 } },
873 },
874
875 /* Those boards with em2870 are DVB Only*/
876
877 [EM2870_BOARD_TERRATEC_XS] = {
878 .name = "Terratec Cinergy T XS",
879 .valid = EM28XX_BOARD_NOT_VALIDATED,
880 .tuner_type = TUNER_XC2028,
881 .tuner_gpio = default_tuner_gpio,
882 },
883 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
884 .name = "Terratec Cinergy T XS (MT2060)",
885 .valid = EM28XX_BOARD_NOT_VALIDATED,
886 .tuner_type = TUNER_ABSENT, /* MT2060 */
887 },
888 [EM2870_BOARD_KWORLD_350U] = {
889 .name = "Kworld 350 U DVB-T",
890 .valid = EM28XX_BOARD_NOT_VALIDATED,
891 .tuner_type = TUNER_XC2028,
892 .tuner_gpio = default_tuner_gpio,
893 },
894 [EM2870_BOARD_KWORLD_355U] = {
895 .name = "Kworld 355 U DVB-T",
896 .valid = EM28XX_BOARD_NOT_VALIDATED,
897 .tuner_type = TUNER_ABSENT,
898 .tuner_gpio = default_tuner_gpio,
899 .has_dvb = 1,
900 .dvb_gpio = default_digital,
901 },
902 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
903 .name = "Pinnacle PCTV DVB-T",
904 .valid = EM28XX_BOARD_NOT_VALIDATED,
905 .tuner_type = TUNER_ABSENT, /* MT2060 */
906 /* djh - I have serious doubts this is right... */
907 .xclk = EM28XX_XCLK_IR_RC5_MODE |
908 EM28XX_XCLK_FREQUENCY_10MHZ,
909 },
910 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
911 .name = "Compro, VideoMate U3",
912 .valid = EM28XX_BOARD_NOT_VALIDATED,
913 .tuner_type = TUNER_ABSENT, /* MT2060 */
914 },
915
916 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
917 .name = "Terratec Hybrid XS Secam",
918 .has_msp34xx = 1,
919 .tuner_type = TUNER_XC2028,
920 .tuner_gpio = default_tuner_gpio,
921 .decoder = EM28XX_TVP5150,
922 .has_dvb = 1,
923 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
924 .input = { {
925 .type = EM28XX_VMUX_TELEVISION,
926 .vmux = TVP5150_COMPOSITE0,
927 .amux = EM28XX_AMUX_VIDEO,
928 .gpio = terratec_cinergy_USB_XS_FR_analog,
929 }, {
930 .type = EM28XX_VMUX_COMPOSITE1,
931 .vmux = TVP5150_COMPOSITE1,
932 .amux = EM28XX_AMUX_LINE_IN,
933 .gpio = terratec_cinergy_USB_XS_FR_analog,
934 }, {
935 .type = EM28XX_VMUX_SVIDEO,
936 .vmux = TVP5150_SVIDEO,
937 .amux = EM28XX_AMUX_LINE_IN,
938 .gpio = terratec_cinergy_USB_XS_FR_analog,
939 } },
940 },
941 [EM2884_BOARD_TERRATEC_H5] = {
942 .name = "Terratec Cinergy H5",
943 .has_dvb = 1,
944 #if 0
945 .tuner_type = TUNER_PHILIPS_TDA8290,
946 .tuner_addr = 0x41,
947 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
948 .tuner_gpio = terratec_h5_gpio,
949 #else
950 .tuner_type = TUNER_ABSENT,
951 #endif
952 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
953 EM28XX_I2C_CLK_WAIT_ENABLE |
954 EM28XX_I2C_FREQ_400_KHZ,
955 },
956 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
957 .name = "Hauppauge WinTV HVR 930C",
958 .has_dvb = 1,
959 #if 0 /* FIXME: Add analog support */
960 .tuner_type = TUNER_XC5000,
961 .tuner_addr = 0x41,
962 .dvb_gpio = hauppauge_930c_digital,
963 .tuner_gpio = hauppauge_930c_gpio,
964 #else
965 .tuner_type = TUNER_ABSENT,
966 #endif
967 .ir_codes = RC_MAP_HAUPPAUGE,
968 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
969 EM28XX_I2C_CLK_WAIT_ENABLE |
970 EM28XX_I2C_FREQ_400_KHZ,
971 },
972 [EM2884_BOARD_CINERGY_HTC_STICK] = {
973 .name = "Terratec Cinergy HTC Stick",
974 .has_dvb = 1,
975 #if 0
976 .tuner_type = TUNER_PHILIPS_TDA8290,
977 .tuner_addr = 0x41,
978 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
979 .tuner_gpio = terratec_h5_gpio,
980 #endif
981 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
982 EM28XX_I2C_CLK_WAIT_ENABLE |
983 EM28XX_I2C_FREQ_400_KHZ,
984 },
985 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
986 .name = "Hauppauge WinTV HVR 900",
987 .tda9887_conf = TDA9887_PRESENT,
988 .tuner_type = TUNER_XC2028,
989 .tuner_gpio = default_tuner_gpio,
990 .mts_firmware = 1,
991 .has_dvb = 1,
992 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
993 .ir_codes = RC_MAP_HAUPPAUGE,
994 .decoder = EM28XX_TVP5150,
995 .input = { {
996 .type = EM28XX_VMUX_TELEVISION,
997 .vmux = TVP5150_COMPOSITE0,
998 .amux = EM28XX_AMUX_VIDEO,
999 .gpio = hauppauge_wintv_hvr_900_analog,
1000 }, {
1001 .type = EM28XX_VMUX_COMPOSITE1,
1002 .vmux = TVP5150_COMPOSITE1,
1003 .amux = EM28XX_AMUX_LINE_IN,
1004 .gpio = hauppauge_wintv_hvr_900_analog,
1005 }, {
1006 .type = EM28XX_VMUX_SVIDEO,
1007 .vmux = TVP5150_SVIDEO,
1008 .amux = EM28XX_AMUX_LINE_IN,
1009 .gpio = hauppauge_wintv_hvr_900_analog,
1010 } },
1011 },
1012 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1013 .name = "Hauppauge WinTV HVR 900 (R2)",
1014 .tda9887_conf = TDA9887_PRESENT,
1015 .tuner_type = TUNER_XC2028,
1016 .tuner_gpio = default_tuner_gpio,
1017 .mts_firmware = 1,
1018 .has_dvb = 1,
1019 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1020 .ir_codes = RC_MAP_HAUPPAUGE,
1021 .decoder = EM28XX_TVP5150,
1022 .input = { {
1023 .type = EM28XX_VMUX_TELEVISION,
1024 .vmux = TVP5150_COMPOSITE0,
1025 .amux = EM28XX_AMUX_VIDEO,
1026 .gpio = hauppauge_wintv_hvr_900_analog,
1027 }, {
1028 .type = EM28XX_VMUX_COMPOSITE1,
1029 .vmux = TVP5150_COMPOSITE1,
1030 .amux = EM28XX_AMUX_LINE_IN,
1031 .gpio = hauppauge_wintv_hvr_900_analog,
1032 }, {
1033 .type = EM28XX_VMUX_SVIDEO,
1034 .vmux = TVP5150_SVIDEO,
1035 .amux = EM28XX_AMUX_LINE_IN,
1036 .gpio = hauppauge_wintv_hvr_900_analog,
1037 } },
1038 },
1039 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1040 .name = "Hauppauge WinTV HVR 850",
1041 .tuner_type = TUNER_XC2028,
1042 .tuner_gpio = default_tuner_gpio,
1043 .mts_firmware = 1,
1044 .has_dvb = 1,
1045 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1046 .ir_codes = RC_MAP_HAUPPAUGE,
1047 .decoder = EM28XX_TVP5150,
1048 .input = { {
1049 .type = EM28XX_VMUX_TELEVISION,
1050 .vmux = TVP5150_COMPOSITE0,
1051 .amux = EM28XX_AMUX_VIDEO,
1052 .gpio = hauppauge_wintv_hvr_900_analog,
1053 }, {
1054 .type = EM28XX_VMUX_COMPOSITE1,
1055 .vmux = TVP5150_COMPOSITE1,
1056 .amux = EM28XX_AMUX_LINE_IN,
1057 .gpio = hauppauge_wintv_hvr_900_analog,
1058 }, {
1059 .type = EM28XX_VMUX_SVIDEO,
1060 .vmux = TVP5150_SVIDEO,
1061 .amux = EM28XX_AMUX_LINE_IN,
1062 .gpio = hauppauge_wintv_hvr_900_analog,
1063 } },
1064 },
1065 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1066 .name = "Hauppauge WinTV HVR 950",
1067 .tuner_type = TUNER_XC2028,
1068 .tuner_gpio = default_tuner_gpio,
1069 .mts_firmware = 1,
1070 .has_dvb = 1,
1071 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1072 .ir_codes = RC_MAP_HAUPPAUGE,
1073 .decoder = EM28XX_TVP5150,
1074 .input = { {
1075 .type = EM28XX_VMUX_TELEVISION,
1076 .vmux = TVP5150_COMPOSITE0,
1077 .amux = EM28XX_AMUX_VIDEO,
1078 .gpio = hauppauge_wintv_hvr_900_analog,
1079 }, {
1080 .type = EM28XX_VMUX_COMPOSITE1,
1081 .vmux = TVP5150_COMPOSITE1,
1082 .amux = EM28XX_AMUX_LINE_IN,
1083 .gpio = hauppauge_wintv_hvr_900_analog,
1084 }, {
1085 .type = EM28XX_VMUX_SVIDEO,
1086 .vmux = TVP5150_SVIDEO,
1087 .amux = EM28XX_AMUX_LINE_IN,
1088 .gpio = hauppauge_wintv_hvr_900_analog,
1089 } },
1090 },
1091 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1092 .name = "Pinnacle PCTV HD Pro Stick",
1093 .tuner_type = TUNER_XC2028,
1094 .tuner_gpio = default_tuner_gpio,
1095 .mts_firmware = 1,
1096 .has_dvb = 1,
1097 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1098 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1099 .decoder = EM28XX_TVP5150,
1100 .input = { {
1101 .type = EM28XX_VMUX_TELEVISION,
1102 .vmux = TVP5150_COMPOSITE0,
1103 .amux = EM28XX_AMUX_VIDEO,
1104 .gpio = hauppauge_wintv_hvr_900_analog,
1105 }, {
1106 .type = EM28XX_VMUX_COMPOSITE1,
1107 .vmux = TVP5150_COMPOSITE1,
1108 .amux = EM28XX_AMUX_LINE_IN,
1109 .gpio = hauppauge_wintv_hvr_900_analog,
1110 }, {
1111 .type = EM28XX_VMUX_SVIDEO,
1112 .vmux = TVP5150_SVIDEO,
1113 .amux = EM28XX_AMUX_LINE_IN,
1114 .gpio = hauppauge_wintv_hvr_900_analog,
1115 } },
1116 },
1117 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1118 .name = "AMD ATI TV Wonder HD 600",
1119 .tuner_type = TUNER_XC2028,
1120 .tuner_gpio = default_tuner_gpio,
1121 .mts_firmware = 1,
1122 .has_dvb = 1,
1123 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1124 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
1125 .decoder = EM28XX_TVP5150,
1126 .input = { {
1127 .type = EM28XX_VMUX_TELEVISION,
1128 .vmux = TVP5150_COMPOSITE0,
1129 .amux = EM28XX_AMUX_VIDEO,
1130 .gpio = hauppauge_wintv_hvr_900_analog,
1131 }, {
1132 .type = EM28XX_VMUX_COMPOSITE1,
1133 .vmux = TVP5150_COMPOSITE1,
1134 .amux = EM28XX_AMUX_LINE_IN,
1135 .gpio = hauppauge_wintv_hvr_900_analog,
1136 }, {
1137 .type = EM28XX_VMUX_SVIDEO,
1138 .vmux = TVP5150_SVIDEO,
1139 .amux = EM28XX_AMUX_LINE_IN,
1140 .gpio = hauppauge_wintv_hvr_900_analog,
1141 } },
1142 },
1143 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1144 .name = "Terratec Hybrid XS",
1145 .tuner_type = TUNER_XC2028,
1146 .tuner_gpio = default_tuner_gpio,
1147 .decoder = EM28XX_TVP5150,
1148 .has_dvb = 1,
1149 .dvb_gpio = default_digital,
1150 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1151 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1152 .input = { {
1153 .type = EM28XX_VMUX_TELEVISION,
1154 .vmux = TVP5150_COMPOSITE0,
1155 .amux = EM28XX_AMUX_VIDEO,
1156 .gpio = default_analog,
1157 }, {
1158 .type = EM28XX_VMUX_COMPOSITE1,
1159 .vmux = TVP5150_COMPOSITE1,
1160 .amux = EM28XX_AMUX_LINE_IN,
1161 .gpio = default_analog,
1162 }, {
1163 .type = EM28XX_VMUX_SVIDEO,
1164 .vmux = TVP5150_SVIDEO,
1165 .amux = EM28XX_AMUX_LINE_IN,
1166 .gpio = default_analog,
1167 } },
1168 },
1169 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1170 as Prodigy XS with a different PID, let's keep it separated for now
1171 maybe we'll need it lateron */
1172 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1173 .name = "Terratec Prodigy XS",
1174 .tuner_type = TUNER_XC2028,
1175 .tuner_gpio = default_tuner_gpio,
1176 .decoder = EM28XX_TVP5150,
1177 .input = { {
1178 .type = EM28XX_VMUX_TELEVISION,
1179 .vmux = TVP5150_COMPOSITE0,
1180 .amux = EM28XX_AMUX_VIDEO,
1181 .gpio = hauppauge_wintv_hvr_900_analog,
1182 }, {
1183 .type = EM28XX_VMUX_COMPOSITE1,
1184 .vmux = TVP5150_COMPOSITE1,
1185 .amux = EM28XX_AMUX_LINE_IN,
1186 .gpio = hauppauge_wintv_hvr_900_analog,
1187 }, {
1188 .type = EM28XX_VMUX_SVIDEO,
1189 .vmux = TVP5150_SVIDEO,
1190 .amux = EM28XX_AMUX_LINE_IN,
1191 .gpio = hauppauge_wintv_hvr_900_analog,
1192 } },
1193 },
1194 [EM2820_BOARD_MSI_VOX_USB_2] = {
1195 .name = "MSI VOX USB 2.0",
1196 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1197 .tda9887_conf = TDA9887_PRESENT |
1198 TDA9887_PORT1_ACTIVE |
1199 TDA9887_PORT2_ACTIVE,
1200 .max_range_640_480 = 1,
1201 .decoder = EM28XX_SAA711X,
1202 .input = { {
1203 .type = EM28XX_VMUX_TELEVISION,
1204 .vmux = SAA7115_COMPOSITE4,
1205 .amux = EM28XX_AMUX_VIDEO,
1206 }, {
1207 .type = EM28XX_VMUX_COMPOSITE1,
1208 .vmux = SAA7115_COMPOSITE0,
1209 .amux = EM28XX_AMUX_LINE_IN,
1210 }, {
1211 .type = EM28XX_VMUX_SVIDEO,
1212 .vmux = SAA7115_SVIDEO3,
1213 .amux = EM28XX_AMUX_LINE_IN,
1214 } },
1215 },
1216 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1217 .name = "Terratec Cinergy 200 USB",
1218 .is_em2800 = 1,
1219 .has_ir_i2c = 1,
1220 .tuner_type = TUNER_LG_TALN,
1221 .tda9887_conf = TDA9887_PRESENT,
1222 .decoder = EM28XX_SAA711X,
1223 .input = { {
1224 .type = EM28XX_VMUX_TELEVISION,
1225 .vmux = SAA7115_COMPOSITE2,
1226 .amux = EM28XX_AMUX_VIDEO,
1227 }, {
1228 .type = EM28XX_VMUX_COMPOSITE1,
1229 .vmux = SAA7115_COMPOSITE0,
1230 .amux = EM28XX_AMUX_LINE_IN,
1231 }, {
1232 .type = EM28XX_VMUX_SVIDEO,
1233 .vmux = SAA7115_SVIDEO3,
1234 .amux = EM28XX_AMUX_LINE_IN,
1235 } },
1236 },
1237 [EM2800_BOARD_GRABBEEX_USB2800] = {
1238 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1239 .is_em2800 = 1,
1240 .decoder = EM28XX_SAA711X,
1241 .tuner_type = TUNER_ABSENT, /* capture only board */
1242 .input = { {
1243 .type = EM28XX_VMUX_COMPOSITE1,
1244 .vmux = SAA7115_COMPOSITE0,
1245 .amux = EM28XX_AMUX_LINE_IN,
1246 }, {
1247 .type = EM28XX_VMUX_SVIDEO,
1248 .vmux = SAA7115_SVIDEO3,
1249 .amux = EM28XX_AMUX_LINE_IN,
1250 } },
1251 },
1252 [EM2800_BOARD_VC211A] = {
1253 .name = "Actionmaster/LinXcel/Digitus VC211A",
1254 .is_em2800 = 1,
1255 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1256 .decoder = EM28XX_SAA711X,
1257 .input = { {
1258 .type = EM28XX_VMUX_COMPOSITE1,
1259 .vmux = SAA7115_COMPOSITE0,
1260 .amux = EM28XX_AMUX_LINE_IN,
1261 .gpio = vc211a_enable,
1262 }, {
1263 .type = EM28XX_VMUX_SVIDEO,
1264 .vmux = SAA7115_SVIDEO3,
1265 .amux = EM28XX_AMUX_LINE_IN,
1266 .gpio = vc211a_enable,
1267 } },
1268 },
1269 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1270 .name = "Leadtek Winfast USB II",
1271 .is_em2800 = 1,
1272 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1273 .tda9887_conf = TDA9887_PRESENT,
1274 .decoder = EM28XX_SAA711X,
1275 .input = { {
1276 .type = EM28XX_VMUX_TELEVISION,
1277 .vmux = SAA7115_COMPOSITE2,
1278 .amux = EM28XX_AMUX_VIDEO,
1279 }, {
1280 .type = EM28XX_VMUX_COMPOSITE1,
1281 .vmux = SAA7115_COMPOSITE0,
1282 .amux = EM28XX_AMUX_LINE_IN,
1283 }, {
1284 .type = EM28XX_VMUX_SVIDEO,
1285 .vmux = SAA7115_SVIDEO3,
1286 .amux = EM28XX_AMUX_LINE_IN,
1287 } },
1288 },
1289 [EM2800_BOARD_KWORLD_USB2800] = {
1290 .name = "Kworld USB2800",
1291 .is_em2800 = 1,
1292 .tuner_type = TUNER_PHILIPS_FCV1236D,
1293 .tda9887_conf = TDA9887_PRESENT,
1294 .decoder = EM28XX_SAA711X,
1295 .input = { {
1296 .type = EM28XX_VMUX_TELEVISION,
1297 .vmux = SAA7115_COMPOSITE2,
1298 .amux = EM28XX_AMUX_VIDEO,
1299 }, {
1300 .type = EM28XX_VMUX_COMPOSITE1,
1301 .vmux = SAA7115_COMPOSITE0,
1302 .amux = EM28XX_AMUX_LINE_IN,
1303 }, {
1304 .type = EM28XX_VMUX_SVIDEO,
1305 .vmux = SAA7115_SVIDEO3,
1306 .amux = EM28XX_AMUX_LINE_IN,
1307 } },
1308 },
1309 [EM2820_BOARD_PINNACLE_DVC_90] = {
1310 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1311 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1312 .tuner_type = TUNER_ABSENT, /* capture only board */
1313 .decoder = EM28XX_SAA711X,
1314 .input = { {
1315 .type = EM28XX_VMUX_COMPOSITE1,
1316 .vmux = SAA7115_COMPOSITE0,
1317 .amux = EM28XX_AMUX_LINE_IN,
1318 }, {
1319 .type = EM28XX_VMUX_SVIDEO,
1320 .vmux = SAA7115_SVIDEO3,
1321 .amux = EM28XX_AMUX_LINE_IN,
1322 } },
1323 },
1324 [EM2800_BOARD_VGEAR_POCKETTV] = {
1325 .name = "V-Gear PocketTV",
1326 .is_em2800 = 1,
1327 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1328 .tda9887_conf = TDA9887_PRESENT,
1329 .decoder = EM28XX_SAA711X,
1330 .input = { {
1331 .type = EM28XX_VMUX_TELEVISION,
1332 .vmux = SAA7115_COMPOSITE2,
1333 .amux = EM28XX_AMUX_VIDEO,
1334 }, {
1335 .type = EM28XX_VMUX_COMPOSITE1,
1336 .vmux = SAA7115_COMPOSITE0,
1337 .amux = EM28XX_AMUX_LINE_IN,
1338 }, {
1339 .type = EM28XX_VMUX_SVIDEO,
1340 .vmux = SAA7115_SVIDEO3,
1341 .amux = EM28XX_AMUX_LINE_IN,
1342 } },
1343 },
1344 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1345 .name = "Pixelview PlayTV Box 4 USB 2.0",
1346 .tda9887_conf = TDA9887_PRESENT,
1347 .tuner_type = TUNER_YMEC_TVF_5533MF,
1348 .decoder = EM28XX_SAA711X,
1349 .input = { {
1350 .type = EM28XX_VMUX_TELEVISION,
1351 .vmux = SAA7115_COMPOSITE2,
1352 .amux = EM28XX_AMUX_VIDEO,
1353 .aout = EM28XX_AOUT_MONO | /* I2S */
1354 EM28XX_AOUT_MASTER, /* Line out pin */
1355 }, {
1356 .type = EM28XX_VMUX_COMPOSITE1,
1357 .vmux = SAA7115_COMPOSITE0,
1358 .amux = EM28XX_AMUX_LINE_IN,
1359 }, {
1360 .type = EM28XX_VMUX_SVIDEO,
1361 .vmux = SAA7115_SVIDEO3,
1362 .amux = EM28XX_AMUX_LINE_IN,
1363 } },
1364 },
1365 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1366 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1367 .has_snapshot_button = 1,
1368 .tda9887_conf = TDA9887_PRESENT,
1369 .tuner_type = TUNER_YMEC_TVF_5533MF,
1370 .decoder = EM28XX_SAA711X,
1371 .input = { {
1372 .type = EM28XX_VMUX_TELEVISION,
1373 .vmux = SAA7115_COMPOSITE2,
1374 .amux = EM28XX_AMUX_VIDEO,
1375 .aout = EM28XX_AOUT_MONO | /* I2S */
1376 EM28XX_AOUT_MASTER, /* Line out pin */
1377 }, {
1378 .type = EM28XX_VMUX_COMPOSITE1,
1379 .vmux = SAA7115_COMPOSITE0,
1380 .amux = EM28XX_AMUX_LINE_IN,
1381 }, {
1382 .type = EM28XX_VMUX_SVIDEO,
1383 .vmux = SAA7115_SVIDEO3,
1384 .amux = EM28XX_AMUX_LINE_IN,
1385 } },
1386 },
1387 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1388 .name = "EM2860/SAA711X Reference Design",
1389 .has_snapshot_button = 1,
1390 .tuner_type = TUNER_ABSENT,
1391 .decoder = EM28XX_SAA711X,
1392 .input = { {
1393 .type = EM28XX_VMUX_SVIDEO,
1394 .vmux = SAA7115_SVIDEO3,
1395 }, {
1396 .type = EM28XX_VMUX_COMPOSITE1,
1397 .vmux = SAA7115_COMPOSITE0,
1398 } },
1399 },
1400
1401 [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1402 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1403 EM28XX_I2C_CLK_WAIT_ENABLE |
1404 EM28XX_I2C_FREQ_100_KHZ,
1405 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1406 .name = "EM2874 Leadership ISDBT",
1407 .tuner_type = TUNER_ABSENT,
1408 .tuner_gpio = leadership_reset,
1409 .dvb_gpio = leadership_digital,
1410 .has_dvb = 1,
1411 },
1412
1413 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1414 .name = "MSI DigiVox A/D",
1415 .valid = EM28XX_BOARD_NOT_VALIDATED,
1416 .tuner_type = TUNER_XC2028,
1417 .tuner_gpio = default_tuner_gpio,
1418 .decoder = EM28XX_TVP5150,
1419 .input = { {
1420 .type = EM28XX_VMUX_TELEVISION,
1421 .vmux = TVP5150_COMPOSITE0,
1422 .amux = EM28XX_AMUX_VIDEO,
1423 .gpio = em2880_msi_digivox_ad_analog,
1424 }, {
1425 .type = EM28XX_VMUX_COMPOSITE1,
1426 .vmux = TVP5150_COMPOSITE1,
1427 .amux = EM28XX_AMUX_LINE_IN,
1428 .gpio = em2880_msi_digivox_ad_analog,
1429 }, {
1430 .type = EM28XX_VMUX_SVIDEO,
1431 .vmux = TVP5150_SVIDEO,
1432 .amux = EM28XX_AMUX_LINE_IN,
1433 .gpio = em2880_msi_digivox_ad_analog,
1434 } },
1435 },
1436 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1437 .name = "MSI DigiVox A/D II",
1438 .valid = EM28XX_BOARD_NOT_VALIDATED,
1439 .tuner_type = TUNER_XC2028,
1440 .tuner_gpio = default_tuner_gpio,
1441 .decoder = EM28XX_TVP5150,
1442 .input = { {
1443 .type = EM28XX_VMUX_TELEVISION,
1444 .vmux = TVP5150_COMPOSITE0,
1445 .amux = EM28XX_AMUX_VIDEO,
1446 .gpio = em2880_msi_digivox_ad_analog,
1447 }, {
1448 .type = EM28XX_VMUX_COMPOSITE1,
1449 .vmux = TVP5150_COMPOSITE1,
1450 .amux = EM28XX_AMUX_LINE_IN,
1451 .gpio = em2880_msi_digivox_ad_analog,
1452 }, {
1453 .type = EM28XX_VMUX_SVIDEO,
1454 .vmux = TVP5150_SVIDEO,
1455 .amux = EM28XX_AMUX_LINE_IN,
1456 .gpio = em2880_msi_digivox_ad_analog,
1457 } },
1458 },
1459 [EM2880_BOARD_KWORLD_DVB_305U] = {
1460 .name = "KWorld DVB-T 305U",
1461 .tuner_type = TUNER_XC2028,
1462 .tuner_gpio = default_tuner_gpio,
1463 .decoder = EM28XX_TVP5150,
1464 .input = { {
1465 .type = EM28XX_VMUX_TELEVISION,
1466 .vmux = TVP5150_COMPOSITE0,
1467 .amux = EM28XX_AMUX_VIDEO,
1468 }, {
1469 .type = EM28XX_VMUX_COMPOSITE1,
1470 .vmux = TVP5150_COMPOSITE1,
1471 .amux = EM28XX_AMUX_LINE_IN,
1472 }, {
1473 .type = EM28XX_VMUX_SVIDEO,
1474 .vmux = TVP5150_SVIDEO,
1475 .amux = EM28XX_AMUX_LINE_IN,
1476 } },
1477 },
1478 [EM2880_BOARD_KWORLD_DVB_310U] = {
1479 .name = "KWorld DVB-T 310U",
1480 .tuner_type = TUNER_XC2028,
1481 .tuner_gpio = default_tuner_gpio,
1482 .has_dvb = 1,
1483 .dvb_gpio = default_digital,
1484 .mts_firmware = 1,
1485 .decoder = EM28XX_TVP5150,
1486 .input = { {
1487 .type = EM28XX_VMUX_TELEVISION,
1488 .vmux = TVP5150_COMPOSITE0,
1489 .amux = EM28XX_AMUX_VIDEO,
1490 .gpio = default_analog,
1491 }, {
1492 .type = EM28XX_VMUX_COMPOSITE1,
1493 .vmux = TVP5150_COMPOSITE1,
1494 .amux = EM28XX_AMUX_LINE_IN,
1495 .gpio = default_analog,
1496 }, { /* S-video has not been tested yet */
1497 .type = EM28XX_VMUX_SVIDEO,
1498 .vmux = TVP5150_SVIDEO,
1499 .amux = EM28XX_AMUX_LINE_IN,
1500 .gpio = default_analog,
1501 } },
1502 },
1503 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1504 .name = "KWorld ATSC 315U HDTV TV Box",
1505 .valid = EM28XX_BOARD_NOT_VALIDATED,
1506 .tuner_type = TUNER_THOMSON_DTT761X,
1507 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1508 .tda9887_conf = TDA9887_PRESENT,
1509 .decoder = EM28XX_SAA711X,
1510 .has_dvb = 1,
1511 .dvb_gpio = em2882_kworld_315u_digital,
1512 .ir_codes = RC_MAP_KWORLD_315U,
1513 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1514 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1515 /* Analog mode - still not ready */
1516 /*.input = { {
1517 .type = EM28XX_VMUX_TELEVISION,
1518 .vmux = SAA7115_COMPOSITE2,
1519 .amux = EM28XX_AMUX_VIDEO,
1520 .gpio = em2882_kworld_315u_analog,
1521 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1522 }, {
1523 .type = EM28XX_VMUX_COMPOSITE1,
1524 .vmux = SAA7115_COMPOSITE0,
1525 .amux = EM28XX_AMUX_LINE_IN,
1526 .gpio = em2882_kworld_315u_analog1,
1527 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1528 }, {
1529 .type = EM28XX_VMUX_SVIDEO,
1530 .vmux = SAA7115_SVIDEO3,
1531 .amux = EM28XX_AMUX_LINE_IN,
1532 .gpio = em2882_kworld_315u_analog1,
1533 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1534 } }, */
1535 },
1536 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1537 .name = "Empire dual TV",
1538 .tuner_type = TUNER_XC2028,
1539 .tuner_gpio = default_tuner_gpio,
1540 .has_dvb = 1,
1541 .dvb_gpio = default_digital,
1542 .mts_firmware = 1,
1543 .decoder = EM28XX_TVP5150,
1544 .input = { {
1545 .type = EM28XX_VMUX_TELEVISION,
1546 .vmux = TVP5150_COMPOSITE0,
1547 .amux = EM28XX_AMUX_VIDEO,
1548 .gpio = default_analog,
1549 }, {
1550 .type = EM28XX_VMUX_COMPOSITE1,
1551 .vmux = TVP5150_COMPOSITE1,
1552 .amux = EM28XX_AMUX_LINE_IN,
1553 .gpio = default_analog,
1554 }, {
1555 .type = EM28XX_VMUX_SVIDEO,
1556 .vmux = TVP5150_SVIDEO,
1557 .amux = EM28XX_AMUX_LINE_IN,
1558 .gpio = default_analog,
1559 } },
1560 },
1561 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1562 .name = "DNT DA2 Hybrid",
1563 .valid = EM28XX_BOARD_NOT_VALIDATED,
1564 .tuner_type = TUNER_XC2028,
1565 .tuner_gpio = default_tuner_gpio,
1566 .decoder = EM28XX_TVP5150,
1567 .input = { {
1568 .type = EM28XX_VMUX_TELEVISION,
1569 .vmux = TVP5150_COMPOSITE0,
1570 .amux = EM28XX_AMUX_VIDEO,
1571 .gpio = default_analog,
1572 }, {
1573 .type = EM28XX_VMUX_COMPOSITE1,
1574 .vmux = TVP5150_COMPOSITE1,
1575 .amux = EM28XX_AMUX_LINE_IN,
1576 .gpio = default_analog,
1577 }, {
1578 .type = EM28XX_VMUX_SVIDEO,
1579 .vmux = TVP5150_SVIDEO,
1580 .amux = EM28XX_AMUX_LINE_IN,
1581 .gpio = default_analog,
1582 } },
1583 },
1584 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1585 .name = "Pinnacle Hybrid Pro",
1586 .tuner_type = TUNER_XC2028,
1587 .tuner_gpio = default_tuner_gpio,
1588 .decoder = EM28XX_TVP5150,
1589 .has_dvb = 1,
1590 .dvb_gpio = pinnacle_hybrid_pro_digital,
1591 .input = { {
1592 .type = EM28XX_VMUX_TELEVISION,
1593 .vmux = TVP5150_COMPOSITE0,
1594 .amux = EM28XX_AMUX_VIDEO,
1595 .gpio = pinnacle_hybrid_pro_analog,
1596 }, {
1597 .type = EM28XX_VMUX_COMPOSITE1,
1598 .vmux = TVP5150_COMPOSITE1,
1599 .amux = EM28XX_AMUX_LINE_IN,
1600 .gpio = pinnacle_hybrid_pro_analog,
1601 }, {
1602 .type = EM28XX_VMUX_SVIDEO,
1603 .vmux = TVP5150_SVIDEO,
1604 .amux = EM28XX_AMUX_LINE_IN,
1605 .gpio = pinnacle_hybrid_pro_analog,
1606 } },
1607 },
1608 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1609 .name = "Pinnacle Hybrid Pro (330e)",
1610 .tuner_type = TUNER_XC2028,
1611 .tuner_gpio = default_tuner_gpio,
1612 .mts_firmware = 1,
1613 .has_dvb = 1,
1614 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1615 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1616 .decoder = EM28XX_TVP5150,
1617 .input = { {
1618 .type = EM28XX_VMUX_TELEVISION,
1619 .vmux = TVP5150_COMPOSITE0,
1620 .amux = EM28XX_AMUX_VIDEO,
1621 .gpio = hauppauge_wintv_hvr_900_analog,
1622 }, {
1623 .type = EM28XX_VMUX_COMPOSITE1,
1624 .vmux = TVP5150_COMPOSITE1,
1625 .amux = EM28XX_AMUX_LINE_IN,
1626 .gpio = hauppauge_wintv_hvr_900_analog,
1627 }, {
1628 .type = EM28XX_VMUX_SVIDEO,
1629 .vmux = TVP5150_SVIDEO,
1630 .amux = EM28XX_AMUX_LINE_IN,
1631 .gpio = hauppauge_wintv_hvr_900_analog,
1632 } },
1633 },
1634 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1635 .name = "Kworld VS-DVB-T 323UR",
1636 .tuner_type = TUNER_XC2028,
1637 .tuner_gpio = default_tuner_gpio,
1638 .decoder = EM28XX_TVP5150,
1639 .mts_firmware = 1,
1640 .has_dvb = 1,
1641 .dvb_gpio = kworld_330u_digital,
1642 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1643 .ir_codes = RC_MAP_KWORLD_315U,
1644 .input = { {
1645 .type = EM28XX_VMUX_TELEVISION,
1646 .vmux = TVP5150_COMPOSITE0,
1647 .amux = EM28XX_AMUX_VIDEO,
1648 }, {
1649 .type = EM28XX_VMUX_COMPOSITE1,
1650 .vmux = TVP5150_COMPOSITE1,
1651 .amux = EM28XX_AMUX_LINE_IN,
1652 }, {
1653 .type = EM28XX_VMUX_SVIDEO,
1654 .vmux = TVP5150_SVIDEO,
1655 .amux = EM28XX_AMUX_LINE_IN,
1656 } },
1657 },
1658 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1659 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1660 .tuner_type = TUNER_XC2028,
1661 .tuner_gpio = default_tuner_gpio,
1662 .mts_firmware = 1,
1663 .decoder = EM28XX_TVP5150,
1664 .has_dvb = 1,
1665 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1666 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1667 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1668 .input = { {
1669 .type = EM28XX_VMUX_TELEVISION,
1670 .vmux = TVP5150_COMPOSITE0,
1671 .amux = EM28XX_AMUX_VIDEO,
1672 .gpio = hauppauge_wintv_hvr_900_analog,
1673 }, {
1674 .type = EM28XX_VMUX_COMPOSITE1,
1675 .vmux = TVP5150_COMPOSITE1,
1676 .amux = EM28XX_AMUX_LINE_IN,
1677 .gpio = hauppauge_wintv_hvr_900_analog,
1678 }, {
1679 .type = EM28XX_VMUX_SVIDEO,
1680 .vmux = TVP5150_SVIDEO,
1681 .amux = EM28XX_AMUX_LINE_IN,
1682 .gpio = hauppauge_wintv_hvr_900_analog,
1683 } },
1684 },
1685 [EM2882_BOARD_DIKOM_DK300] = {
1686 .name = "Dikom DK300",
1687 .tuner_type = TUNER_XC2028,
1688 .tuner_gpio = default_tuner_gpio,
1689 .decoder = EM28XX_TVP5150,
1690 .mts_firmware = 1,
1691 .has_dvb = 1,
1692 .dvb_gpio = dikom_dk300_digital,
1693 .input = { {
1694 .type = EM28XX_VMUX_TELEVISION,
1695 .vmux = TVP5150_COMPOSITE0,
1696 .amux = EM28XX_AMUX_VIDEO,
1697 .gpio = default_analog,
1698 } },
1699 },
1700 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1701 .name = "Kworld PlusTV HD Hybrid 330",
1702 .tuner_type = TUNER_XC2028,
1703 .tuner_gpio = default_tuner_gpio,
1704 .decoder = EM28XX_TVP5150,
1705 .mts_firmware = 1,
1706 .has_dvb = 1,
1707 .dvb_gpio = kworld_330u_digital,
1708 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1709 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1710 EM28XX_I2C_EEPROM_ON_BOARD |
1711 EM28XX_I2C_EEPROM_KEY_VALID,
1712 .input = { {
1713 .type = EM28XX_VMUX_TELEVISION,
1714 .vmux = TVP5150_COMPOSITE0,
1715 .amux = EM28XX_AMUX_VIDEO,
1716 .gpio = kworld_330u_analog,
1717 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1718 }, {
1719 .type = EM28XX_VMUX_COMPOSITE1,
1720 .vmux = TVP5150_COMPOSITE1,
1721 .amux = EM28XX_AMUX_LINE_IN,
1722 .gpio = kworld_330u_analog,
1723 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1724 }, {
1725 .type = EM28XX_VMUX_SVIDEO,
1726 .vmux = TVP5150_SVIDEO,
1727 .amux = EM28XX_AMUX_LINE_IN,
1728 .gpio = kworld_330u_analog,
1729 } },
1730 },
1731 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1732 .name = "Compro VideoMate ForYou/Stereo",
1733 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1734 .tvaudio_addr = 0xb0,
1735 .tda9887_conf = TDA9887_PRESENT,
1736 .decoder = EM28XX_TVP5150,
1737 .adecoder = EM28XX_TVAUDIO,
1738 .mute_gpio = compro_mute_gpio,
1739 .input = { {
1740 .type = EM28XX_VMUX_TELEVISION,
1741 .vmux = TVP5150_COMPOSITE0,
1742 .amux = EM28XX_AMUX_VIDEO,
1743 .gpio = compro_unmute_tv_gpio,
1744 }, {
1745 .type = EM28XX_VMUX_SVIDEO,
1746 .vmux = TVP5150_SVIDEO,
1747 .amux = EM28XX_AMUX_LINE_IN,
1748 .gpio = compro_unmute_svid_gpio,
1749 } },
1750 },
1751 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1752 .name = "Kaiomy TVnPC U2",
1753 .vchannels = 3,
1754 .tuner_type = TUNER_XC2028,
1755 .tuner_addr = 0x61,
1756 .mts_firmware = 1,
1757 .decoder = EM28XX_TVP5150,
1758 .tuner_gpio = default_tuner_gpio,
1759 .ir_codes = RC_MAP_KAIOMY,
1760 .input = { {
1761 .type = EM28XX_VMUX_TELEVISION,
1762 .vmux = TVP5150_COMPOSITE0,
1763 .amux = EM28XX_AMUX_VIDEO,
1764
1765 }, {
1766 .type = EM28XX_VMUX_COMPOSITE1,
1767 .vmux = TVP5150_COMPOSITE1,
1768 .amux = EM28XX_AMUX_LINE_IN,
1769 }, {
1770 .type = EM28XX_VMUX_SVIDEO,
1771 .vmux = TVP5150_SVIDEO,
1772 .amux = EM28XX_AMUX_LINE_IN,
1773 } },
1774 .radio = {
1775 .type = EM28XX_RADIO,
1776 .amux = EM28XX_AMUX_LINE_IN,
1777 }
1778 },
1779 [EM2860_BOARD_EASYCAP] = {
1780 .name = "Easy Cap Capture DC-60",
1781 .vchannels = 2,
1782 .tuner_type = TUNER_ABSENT,
1783 .decoder = EM28XX_SAA711X,
1784 .input = { {
1785 .type = EM28XX_VMUX_COMPOSITE1,
1786 .vmux = SAA7115_COMPOSITE0,
1787 .amux = EM28XX_AMUX_LINE_IN,
1788 }, {
1789 .type = EM28XX_VMUX_SVIDEO,
1790 .vmux = SAA7115_SVIDEO3,
1791 .amux = EM28XX_AMUX_LINE_IN,
1792 } },
1793 },
1794 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1795 .name = "IO-DATA GV-MVP/SZ",
1796 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1797 .tuner_gpio = default_tuner_gpio,
1798 .tda9887_conf = TDA9887_PRESENT,
1799 .decoder = EM28XX_TVP5150,
1800 .input = { {
1801 .type = EM28XX_VMUX_TELEVISION,
1802 .vmux = TVP5150_COMPOSITE0,
1803 .amux = EM28XX_AMUX_VIDEO,
1804 }, { /* Composite has not been tested yet */
1805 .type = EM28XX_VMUX_COMPOSITE1,
1806 .vmux = TVP5150_COMPOSITE1,
1807 .amux = EM28XX_AMUX_VIDEO,
1808 }, { /* S-video has not been tested yet */
1809 .type = EM28XX_VMUX_SVIDEO,
1810 .vmux = TVP5150_SVIDEO,
1811 .amux = EM28XX_AMUX_VIDEO,
1812 } },
1813 },
1814 [EM2860_BOARD_TERRATEC_GRABBY] = {
1815 .name = "Terratec Grabby",
1816 .vchannels = 2,
1817 .tuner_type = TUNER_ABSENT,
1818 .decoder = EM28XX_SAA711X,
1819 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1820 .input = { {
1821 .type = EM28XX_VMUX_COMPOSITE1,
1822 .vmux = SAA7115_COMPOSITE0,
1823 .amux = EM28XX_AMUX_LINE_IN,
1824 }, {
1825 .type = EM28XX_VMUX_SVIDEO,
1826 .vmux = SAA7115_SVIDEO3,
1827 .amux = EM28XX_AMUX_LINE_IN,
1828 } },
1829 },
1830 [EM2860_BOARD_TERRATEC_AV350] = {
1831 .name = "Terratec AV350",
1832 .vchannels = 2,
1833 .tuner_type = TUNER_ABSENT,
1834 .decoder = EM28XX_TVP5150,
1835 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1836 .mute_gpio = terratec_av350_mute_gpio,
1837 .input = { {
1838 .type = EM28XX_VMUX_COMPOSITE1,
1839 .vmux = TVP5150_COMPOSITE1,
1840 .amux = EM28XX_AUDIO_SRC_LINE,
1841 .gpio = terratec_av350_unmute_gpio,
1842
1843 }, {
1844 .type = EM28XX_VMUX_SVIDEO,
1845 .vmux = TVP5150_SVIDEO,
1846 .amux = EM28XX_AUDIO_SRC_LINE,
1847 .gpio = terratec_av350_unmute_gpio,
1848 } },
1849 },
1850
1851 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
1852 .name = "Elgato Video Capture",
1853 .decoder = EM28XX_SAA711X,
1854 .tuner_type = TUNER_ABSENT, /* Capture only device */
1855 .input = { {
1856 .type = EM28XX_VMUX_COMPOSITE1,
1857 .vmux = SAA7115_COMPOSITE0,
1858 .amux = EM28XX_AMUX_LINE_IN,
1859 }, {
1860 .type = EM28XX_VMUX_SVIDEO,
1861 .vmux = SAA7115_SVIDEO3,
1862 .amux = EM28XX_AMUX_LINE_IN,
1863 } },
1864 },
1865
1866 [EM2882_BOARD_EVGA_INDTUBE] = {
1867 .name = "Evga inDtube",
1868 .tuner_type = TUNER_XC2028,
1869 .tuner_gpio = default_tuner_gpio,
1870 .decoder = EM28XX_TVP5150,
1871 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1872 .mts_firmware = 1,
1873 .has_dvb = 1,
1874 .dvb_gpio = evga_indtube_digital,
1875 .ir_codes = RC_MAP_EVGA_INDTUBE,
1876 .input = { {
1877 .type = EM28XX_VMUX_TELEVISION,
1878 .vmux = TVP5150_COMPOSITE0,
1879 .amux = EM28XX_AMUX_VIDEO,
1880 .gpio = evga_indtube_analog,
1881 }, {
1882 .type = EM28XX_VMUX_COMPOSITE1,
1883 .vmux = TVP5150_COMPOSITE1,
1884 .amux = EM28XX_AMUX_LINE_IN,
1885 .gpio = evga_indtube_analog,
1886 }, {
1887 .type = EM28XX_VMUX_SVIDEO,
1888 .vmux = TVP5150_SVIDEO,
1889 .amux = EM28XX_AMUX_LINE_IN,
1890 .gpio = evga_indtube_analog,
1891 } },
1892 },
1893 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1894 Infineon TUA6034) */
1895 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1896 .name = "Reddo DVB-C USB TV Box",
1897 .tuner_type = TUNER_ABSENT,
1898 .tuner_gpio = reddo_dvb_c_usb_box,
1899 .has_dvb = 1,
1900 },
1901 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
1902 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
1903 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
1904 [EM2870_BOARD_KWORLD_A340] = {
1905 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
1906 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1907 .has_dvb = 1,
1908 .dvb_gpio = kworld_a340_digital,
1909 .tuner_gpio = default_tuner_gpio,
1910 },
1911 /* 2013:024f PCTV nanoStick T2 290e.
1912 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
1913 [EM28174_BOARD_PCTV_290E] = {
1914 .name = "PCTV nanoStick T2 290e",
1915 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1916 EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
1917 .tuner_type = TUNER_ABSENT,
1918 .tuner_gpio = pctv_290e,
1919 .has_dvb = 1,
1920 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1921 },
1922 /* 2013:024f PCTV DVB-S2 Stick 460e
1923 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
1924 [EM28174_BOARD_PCTV_460E] = {
1925 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1926 EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
1927 .name = "PCTV DVB-S2 Stick (460e)",
1928 .tuner_type = TUNER_ABSENT,
1929 .tuner_gpio = pctv_460e,
1930 .has_dvb = 1,
1931 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1932 },
1933 /* eb1a:5006 Honestech VIDBOX NW03
1934 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
1935 [EM2860_BOARD_HT_VIDBOX_NW03] = {
1936 .name = "Honestech Vidbox NW03",
1937 .tuner_type = TUNER_ABSENT,
1938 .decoder = EM28XX_SAA711X,
1939 .input = { {
1940 .type = EM28XX_VMUX_COMPOSITE1,
1941 .vmux = SAA7115_COMPOSITE0,
1942 .amux = EM28XX_AMUX_LINE_IN,
1943 }, {
1944 .type = EM28XX_VMUX_SVIDEO,
1945 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */
1946 .amux = EM28XX_AMUX_LINE_IN,
1947 } },
1948 },
1949 /* 1b80:e425 MaxMedia UB425-TC
1950 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
1951 [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
1952 .name = "MaxMedia UB425-TC",
1953 .tuner_type = TUNER_ABSENT,
1954 .tuner_gpio = maxmedia_ub425_tc,
1955 .has_dvb = 1,
1956 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1957 EM28XX_I2C_CLK_WAIT_ENABLE |
1958 EM28XX_I2C_FREQ_400_KHZ,
1959 },
1960 /* 2304:0242 PCTV QuatroStick (510e)
1961 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1962 [EM2884_BOARD_PCTV_510E] = {
1963 .name = "PCTV QuatroStick (510e)",
1964 .tuner_type = TUNER_ABSENT,
1965 .tuner_gpio = pctv_510e,
1966 .has_dvb = 1,
1967 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1968 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1969 EM28XX_I2C_CLK_WAIT_ENABLE |
1970 EM28XX_I2C_FREQ_400_KHZ,
1971 },
1972 /* 2013:0251 PCTV QuatroStick nano (520e)
1973 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
1974 [EM2884_BOARD_PCTV_520E] = {
1975 .name = "PCTV QuatroStick nano (520e)",
1976 .tuner_type = TUNER_ABSENT,
1977 .tuner_gpio = pctv_520e,
1978 .has_dvb = 1,
1979 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1980 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1981 EM28XX_I2C_CLK_WAIT_ENABLE |
1982 EM28XX_I2C_FREQ_400_KHZ,
1983 },
1984 };
1985 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1986
1987 /* table of devices that work with this driver */
1988 struct usb_device_id em28xx_id_table[] = {
1989 { USB_DEVICE(0xeb1a, 0x2750),
1990 .driver_info = EM2750_BOARD_UNKNOWN },
1991 { USB_DEVICE(0xeb1a, 0x2751),
1992 .driver_info = EM2750_BOARD_UNKNOWN },
1993 { USB_DEVICE(0xeb1a, 0x2800),
1994 .driver_info = EM2800_BOARD_UNKNOWN },
1995 { USB_DEVICE(0xeb1a, 0x2710),
1996 .driver_info = EM2820_BOARD_UNKNOWN },
1997 { USB_DEVICE(0xeb1a, 0x2820),
1998 .driver_info = EM2820_BOARD_UNKNOWN },
1999 { USB_DEVICE(0xeb1a, 0x2821),
2000 .driver_info = EM2820_BOARD_UNKNOWN },
2001 { USB_DEVICE(0xeb1a, 0x2860),
2002 .driver_info = EM2820_BOARD_UNKNOWN },
2003 { USB_DEVICE(0xeb1a, 0x2861),
2004 .driver_info = EM2820_BOARD_UNKNOWN },
2005 { USB_DEVICE(0xeb1a, 0x2862),
2006 .driver_info = EM2820_BOARD_UNKNOWN },
2007 { USB_DEVICE(0xeb1a, 0x2863),
2008 .driver_info = EM2820_BOARD_UNKNOWN },
2009 { USB_DEVICE(0xeb1a, 0x2870),
2010 .driver_info = EM2820_BOARD_UNKNOWN },
2011 { USB_DEVICE(0xeb1a, 0x2881),
2012 .driver_info = EM2820_BOARD_UNKNOWN },
2013 { USB_DEVICE(0xeb1a, 0x2883),
2014 .driver_info = EM2820_BOARD_UNKNOWN },
2015 { USB_DEVICE(0xeb1a, 0x2868),
2016 .driver_info = EM2820_BOARD_UNKNOWN },
2017 { USB_DEVICE(0xeb1a, 0x2875),
2018 .driver_info = EM2820_BOARD_UNKNOWN },
2019 { USB_DEVICE(0xeb1a, 0xe300),
2020 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2021 { USB_DEVICE(0xeb1a, 0xe303),
2022 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2023 { USB_DEVICE(0xeb1a, 0xe305),
2024 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2025 { USB_DEVICE(0xeb1a, 0xe310),
2026 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2027 { USB_DEVICE(0xeb1a, 0xa313),
2028 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2029 { USB_DEVICE(0xeb1a, 0xa316),
2030 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2031 { USB_DEVICE(0xeb1a, 0xe320),
2032 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2033 { USB_DEVICE(0xeb1a, 0xe323),
2034 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2035 { USB_DEVICE(0xeb1a, 0xe350),
2036 .driver_info = EM2870_BOARD_KWORLD_350U },
2037 { USB_DEVICE(0xeb1a, 0xe355),
2038 .driver_info = EM2870_BOARD_KWORLD_355U },
2039 { USB_DEVICE(0xeb1a, 0x2801),
2040 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2041 { USB_DEVICE(0xeb1a, 0xe357),
2042 .driver_info = EM2870_BOARD_KWORLD_355U },
2043 { USB_DEVICE(0xeb1a, 0xe359),
2044 .driver_info = EM2870_BOARD_KWORLD_355U },
2045 { USB_DEVICE(0x1b80, 0xe302),
2046 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
2047 { USB_DEVICE(0x1b80, 0xe304),
2048 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
2049 { USB_DEVICE(0x0ccd, 0x0036),
2050 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2051 { USB_DEVICE(0x0ccd, 0x004c),
2052 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2053 { USB_DEVICE(0x0ccd, 0x004f),
2054 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2055 { USB_DEVICE(0x0ccd, 0x005e),
2056 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2057 { USB_DEVICE(0x0ccd, 0x0042),
2058 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2059 { USB_DEVICE(0x0ccd, 0x0043),
2060 .driver_info = EM2870_BOARD_TERRATEC_XS },
2061 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
2062 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2063 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
2064 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2065 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
2066 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2067 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
2068 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2069 { USB_DEVICE(0x0ccd, 0x0084),
2070 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2071 { USB_DEVICE(0x0ccd, 0x0096),
2072 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2073 { USB_DEVICE(0x0ccd, 0x10AF),
2074 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2075 { USB_DEVICE(0x0ccd, 0x00b2),
2076 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2077 { USB_DEVICE(0x0fd9, 0x0033),
2078 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
2079 { USB_DEVICE(0x185b, 0x2870),
2080 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2081 { USB_DEVICE(0x185b, 0x2041),
2082 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2083 { USB_DEVICE(0x2040, 0x4200),
2084 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2085 { USB_DEVICE(0x2040, 0x4201),
2086 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2087 { USB_DEVICE(0x2040, 0x6500),
2088 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2089 { USB_DEVICE(0x2040, 0x6502),
2090 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2091 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2092 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2093 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
2094 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2095 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
2096 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2097 { USB_DEVICE(0x2040, 0x651f),
2098 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2099 { USB_DEVICE(0x0438, 0xb002),
2100 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2101 { USB_DEVICE(0x2001, 0xf112),
2102 .driver_info = EM2820_BOARD_DLINK_USB_TV },
2103 { USB_DEVICE(0x2304, 0x0207),
2104 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2105 { USB_DEVICE(0x2304, 0x0208),
2106 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2107 { USB_DEVICE(0x2304, 0x021a),
2108 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2109 { USB_DEVICE(0x2304, 0x0226),
2110 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2111 { USB_DEVICE(0x2304, 0x0227),
2112 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2113 { USB_DEVICE(0x0413, 0x6023),
2114 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2115 { USB_DEVICE(0x093b, 0xa003),
2116 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2117 { USB_DEVICE(0x093b, 0xa005),
2118 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2119 { USB_DEVICE(0x04bb, 0x0515),
2120 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2121 { USB_DEVICE(0xeb1a, 0x50a6),
2122 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2123 { USB_DEVICE(0x1b80, 0xa340),
2124 .driver_info = EM2870_BOARD_KWORLD_A340 },
2125 { USB_DEVICE(0x2013, 0x024f),
2126 .driver_info = EM28174_BOARD_PCTV_290E },
2127 { USB_DEVICE(0x2013, 0x024c),
2128 .driver_info = EM28174_BOARD_PCTV_460E },
2129 { USB_DEVICE(0x2040, 0x1605),
2130 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2131 { USB_DEVICE(0xeb1a, 0x5006),
2132 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2133 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2134 .driver_info = EM2860_BOARD_EASYCAP },
2135 { USB_DEVICE(0x1b80, 0xe425),
2136 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2137 { USB_DEVICE(0x2304, 0x0242),
2138 .driver_info = EM2884_BOARD_PCTV_510E },
2139 { USB_DEVICE(0x2013, 0x0251),
2140 .driver_info = EM2884_BOARD_PCTV_520E },
2141 { },
2142 };
2143 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2144
2145 /*
2146 * EEPROM hash table for devices with generic USB IDs
2147 */
2148 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
2149 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2150 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2151 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2152 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2153 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2154 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2155 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2156 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2157 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2158 };
2159
2160 /* I2C devicelist hash table for devices with generic USB IDs */
2161 static struct em28xx_hash_table em28xx_i2c_hash[] = {
2162 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2163 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2164 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2165 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2166 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2167 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2168 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2169 };
2170
2171 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
2172 static unsigned short saa711x_addrs[] = {
2173 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
2174 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
2175 I2C_CLIENT_END };
2176
2177 static unsigned short tvp5150_addrs[] = {
2178 0xb8 >> 1,
2179 0xba >> 1,
2180 I2C_CLIENT_END
2181 };
2182
2183 static unsigned short msp3400_addrs[] = {
2184 0x80 >> 1,
2185 0x88 >> 1,
2186 I2C_CLIENT_END
2187 };
2188
em28xx_tuner_callback(void * ptr,int component,int command,int arg)2189 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2190 {
2191 int rc = 0;
2192 struct em28xx *dev = ptr;
2193
2194 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2195 return 0;
2196
2197 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2198 return 0;
2199
2200 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2201
2202 return rc;
2203 }
2204 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2205
em28xx_set_model(struct em28xx * dev)2206 static inline void em28xx_set_model(struct em28xx *dev)
2207 {
2208 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
2209
2210 /* Those are the default values for the majority of boards
2211 Use those values if not specified otherwise at boards entry
2212 */
2213 if (!dev->board.xclk)
2214 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
2215 EM28XX_XCLK_FREQUENCY_12MHZ;
2216
2217 if (!dev->board.i2c_speed)
2218 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2219 EM28XX_I2C_FREQ_100_KHZ;
2220 }
2221
2222
2223 /* FIXME: Should be replaced by a proper mt9m111 driver */
em28xx_initialize_mt9m111(struct em28xx * dev)2224 static int em28xx_initialize_mt9m111(struct em28xx *dev)
2225 {
2226 int i;
2227 unsigned char regs[][3] = {
2228 { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
2229 { 0x0d, 0x00, 0x00, },
2230 { 0x0a, 0x00, 0x21, },
2231 { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
2232 };
2233
2234 for (i = 0; i < ARRAY_SIZE(regs); i++)
2235 i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
2236
2237 return 0;
2238 }
2239
2240
2241 /* FIXME: Should be replaced by a proper mt9m001 driver */
em28xx_initialize_mt9m001(struct em28xx * dev)2242 static int em28xx_initialize_mt9m001(struct em28xx *dev)
2243 {
2244 int i;
2245 unsigned char regs[][3] = {
2246 { 0x0d, 0x00, 0x01, },
2247 { 0x0d, 0x00, 0x00, },
2248 { 0x04, 0x05, 0x00, }, /* hres = 1280 */
2249 { 0x03, 0x04, 0x00, }, /* vres = 1024 */
2250 { 0x20, 0x11, 0x00, },
2251 { 0x06, 0x00, 0x10, },
2252 { 0x2b, 0x00, 0x24, },
2253 { 0x2e, 0x00, 0x24, },
2254 { 0x35, 0x00, 0x24, },
2255 { 0x2d, 0x00, 0x20, },
2256 { 0x2c, 0x00, 0x20, },
2257 { 0x09, 0x0a, 0xd4, },
2258 { 0x35, 0x00, 0x57, },
2259 };
2260
2261 for (i = 0; i < ARRAY_SIZE(regs); i++)
2262 i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
2263
2264 return 0;
2265 }
2266
2267 /* HINT method: webcam I2C chips
2268 *
2269 * This method works for webcams with Micron sensors
2270 */
em28xx_hint_sensor(struct em28xx * dev)2271 static int em28xx_hint_sensor(struct em28xx *dev)
2272 {
2273 int rc;
2274 char *sensor_name;
2275 unsigned char cmd;
2276 __be16 version_be;
2277 u16 version;
2278
2279 /* Micron sensor detection */
2280 dev->i2c_client.addr = 0xba >> 1;
2281 cmd = 0;
2282 i2c_master_send(&dev->i2c_client, &cmd, 1);
2283 rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
2284 if (rc != 2)
2285 return -EINVAL;
2286
2287 version = be16_to_cpu(version_be);
2288 switch (version) {
2289 case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
2290 case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
2291 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2292 em28xx_set_model(dev);
2293
2294 sensor_name = "mt9v011";
2295 dev->em28xx_sensor = EM28XX_MT9V011;
2296 dev->sensor_xres = 640;
2297 dev->sensor_yres = 480;
2298 /*
2299 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
2300 * the Silvercrest cam I have here for testing - for higher
2301 * resolutions, a high clock cause horizontal artifacts, so we
2302 * need to use a lower xclk frequency.
2303 * Yet, it would be possible to adjust xclk depending on the
2304 * desired resolution, since this affects directly the
2305 * frame rate.
2306 */
2307 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
2308 dev->sensor_xtal = 4300000;
2309
2310 /* probably means GRGB 16 bit bayer */
2311 dev->vinmode = 0x0d;
2312 dev->vinctl = 0x00;
2313
2314 break;
2315
2316 case 0x143a: /* MT9M111 as found in the ECS G200 */
2317 dev->model = EM2750_BOARD_UNKNOWN;
2318 em28xx_set_model(dev);
2319
2320 sensor_name = "mt9m111";
2321 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
2322 dev->em28xx_sensor = EM28XX_MT9M111;
2323 em28xx_initialize_mt9m111(dev);
2324 dev->sensor_xres = 640;
2325 dev->sensor_yres = 512;
2326
2327 dev->vinmode = 0x0a;
2328 dev->vinctl = 0x00;
2329
2330 break;
2331
2332 case 0x8431:
2333 dev->model = EM2750_BOARD_UNKNOWN;
2334 em28xx_set_model(dev);
2335
2336 sensor_name = "mt9m001";
2337 dev->em28xx_sensor = EM28XX_MT9M001;
2338 em28xx_initialize_mt9m001(dev);
2339 dev->sensor_xres = 1280;
2340 dev->sensor_yres = 1024;
2341
2342 /* probably means BGGR 16 bit bayer */
2343 dev->vinmode = 0x0c;
2344 dev->vinctl = 0x00;
2345
2346 break;
2347 default:
2348 printk("Unknown Micron Sensor 0x%04x\n", version);
2349 return -EINVAL;
2350 }
2351
2352 /* Setup webcam defaults */
2353 em28xx_pre_card_setup(dev);
2354
2355 em28xx_errdev("Sensor is %s, using model %s entry.\n",
2356 sensor_name, em28xx_boards[dev->model].name);
2357
2358 return 0;
2359 }
2360
2361 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2362 * this won't work for boards with generic PCI IDs
2363 */
em28xx_pre_card_setup(struct em28xx * dev)2364 void em28xx_pre_card_setup(struct em28xx *dev)
2365 {
2366 /* Set the initial XCLK and I2C clock values based on the board
2367 definition */
2368 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2369 if (!dev->board.is_em2800)
2370 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2371 msleep(50);
2372
2373 /* request some modules */
2374 switch (dev->model) {
2375 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2376 /* Sets the msp34xx I2S speed */
2377 dev->i2s_speed = 2048000;
2378 break;
2379 case EM2861_BOARD_KWORLD_PVRTV_300U:
2380 case EM2880_BOARD_KWORLD_DVB_305U:
2381 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2382 msleep(10);
2383 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2384 msleep(10);
2385 break;
2386 case EM2870_BOARD_COMPRO_VIDEOMATE:
2387 /* TODO: someone can do some cleanup here...
2388 not everything's needed */
2389 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2390 msleep(10);
2391 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2392 msleep(10);
2393 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2394 mdelay(70);
2395 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2396 mdelay(70);
2397 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2398 mdelay(70);
2399 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2400 mdelay(70);
2401 break;
2402 case EM2870_BOARD_TERRATEC_XS_MT2060:
2403 /* this device needs some gpio writes to get the DVB-T
2404 demod work */
2405 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2406 mdelay(70);
2407 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2408 mdelay(70);
2409 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2410 mdelay(70);
2411 break;
2412 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2413 /* this device needs some gpio writes to get the
2414 DVB-T demod work */
2415 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2416 mdelay(70);
2417 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2418 mdelay(70);
2419 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2420 mdelay(70);
2421 break;
2422 case EM2820_BOARD_GADMEI_UTV310:
2423 case EM2820_BOARD_MSI_VOX_USB_2:
2424 /* enables audio for that devices */
2425 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2426 break;
2427
2428 case EM2882_BOARD_KWORLD_ATSC_315U:
2429 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2430 msleep(10);
2431 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2432 msleep(10);
2433 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2434 msleep(10);
2435 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2436 msleep(10);
2437 break;
2438
2439 case EM2860_BOARD_KAIOMY_TVNPC_U2:
2440 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2441 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2442 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2443 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2444 msleep(10);
2445 em28xx_write_regs(dev, 0x08, "\xff", 1);
2446 msleep(10);
2447 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2448 msleep(10);
2449 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2450
2451 break;
2452 case EM2860_BOARD_EASYCAP:
2453 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2454 break;
2455
2456 case EM2820_BOARD_IODATA_GVMVP_SZ:
2457 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2458 msleep(70);
2459 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2460 msleep(10);
2461 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2462 msleep(70);
2463 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2464 msleep(70);
2465 break;
2466 }
2467
2468 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2469 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2470
2471 /* Unlock device */
2472 em28xx_set_mode(dev, EM28XX_SUSPEND);
2473 }
2474
em28xx_setup_xc3028(struct em28xx * dev,struct xc2028_ctrl * ctl)2475 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2476 {
2477 memset(ctl, 0, sizeof(*ctl));
2478
2479 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2480 ctl->max_len = 64;
2481 ctl->mts = em28xx_boards[dev->model].mts_firmware;
2482
2483 switch (dev->model) {
2484 case EM2880_BOARD_EMPIRE_DUAL_TV:
2485 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2486 case EM2882_BOARD_TERRATEC_HYBRID_XS:
2487 ctl->demod = XC3028_FE_ZARLINK456;
2488 break;
2489 case EM2880_BOARD_TERRATEC_HYBRID_XS:
2490 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2491 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2492 ctl->demod = XC3028_FE_ZARLINK456;
2493 break;
2494 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2495 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
2496 ctl->demod = XC3028_FE_DEFAULT;
2497 break;
2498 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2499 ctl->demod = XC3028_FE_DEFAULT;
2500 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2501 break;
2502 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2503 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2504 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2505 /* FIXME: Better to specify the needed IF */
2506 ctl->demod = XC3028_FE_DEFAULT;
2507 break;
2508 case EM2883_BOARD_KWORLD_HYBRID_330U:
2509 case EM2882_BOARD_DIKOM_DK300:
2510 case EM2882_BOARD_KWORLD_VS_DVBT:
2511 ctl->demod = XC3028_FE_CHINA;
2512 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2513 break;
2514 case EM2882_BOARD_EVGA_INDTUBE:
2515 ctl->demod = XC3028_FE_CHINA;
2516 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2517 break;
2518 default:
2519 ctl->demod = XC3028_FE_OREN538;
2520 }
2521 }
2522
em28xx_tuner_setup(struct em28xx * dev)2523 static void em28xx_tuner_setup(struct em28xx *dev)
2524 {
2525 struct tuner_setup tun_setup;
2526 struct v4l2_frequency f;
2527
2528 if (dev->tuner_type == TUNER_ABSENT)
2529 return;
2530
2531 memset(&tun_setup, 0, sizeof(tun_setup));
2532
2533 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2534 tun_setup.tuner_callback = em28xx_tuner_callback;
2535
2536 if (dev->board.radio.type) {
2537 tun_setup.type = dev->board.radio.type;
2538 tun_setup.addr = dev->board.radio_addr;
2539
2540 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2541 }
2542
2543 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2544 tun_setup.type = dev->tuner_type;
2545 tun_setup.addr = dev->tuner_addr;
2546
2547 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2548 }
2549
2550 if (dev->tda9887_conf) {
2551 struct v4l2_priv_tun_config tda9887_cfg;
2552
2553 tda9887_cfg.tuner = TUNER_TDA9887;
2554 tda9887_cfg.priv = &dev->tda9887_conf;
2555
2556 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2557 }
2558
2559 if (dev->tuner_type == TUNER_XC2028) {
2560 struct v4l2_priv_tun_config xc2028_cfg;
2561 struct xc2028_ctrl ctl;
2562
2563 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2564 memset(&ctl, 0, sizeof(ctl));
2565
2566 em28xx_setup_xc3028(dev, &ctl);
2567
2568 xc2028_cfg.tuner = TUNER_XC2028;
2569 xc2028_cfg.priv = &ctl;
2570
2571 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2572 }
2573
2574 /* configure tuner */
2575 f.tuner = 0;
2576 f.type = V4L2_TUNER_ANALOG_TV;
2577 f.frequency = 9076; /* just a magic number */
2578 dev->ctl_freq = f.frequency;
2579 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2580 }
2581
em28xx_hint_board(struct em28xx * dev)2582 static int em28xx_hint_board(struct em28xx *dev)
2583 {
2584 int i;
2585
2586 /* HINT method: EEPROM
2587 *
2588 * This method works only for boards with eeprom.
2589 * Uses a hash of all eeprom bytes. The hash should be
2590 * unique for a vendor/tuner pair.
2591 * There are a high chance that tuners for different
2592 * video standards produce different hashes.
2593 */
2594 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2595 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2596 dev->model = em28xx_eeprom_hash[i].model;
2597 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2598
2599 em28xx_errdev("Your board has no unique USB ID.\n");
2600 em28xx_errdev("A hint were successfully done, "
2601 "based on eeprom hash.\n");
2602 em28xx_errdev("This method is not 100%% failproof.\n");
2603 em28xx_errdev("If the board were missdetected, "
2604 "please email this log to:\n");
2605 em28xx_errdev("\tV4L Mailing List "
2606 " <linux-media@vger.kernel.org>\n");
2607 em28xx_errdev("Board detected as %s\n",
2608 em28xx_boards[dev->model].name);
2609
2610 return 0;
2611 }
2612 }
2613
2614 /* HINT method: I2C attached devices
2615 *
2616 * This method works for all boards.
2617 * Uses a hash of i2c scanned devices.
2618 * Devices with the same i2c attached chips will
2619 * be considered equal.
2620 * This method is less precise than the eeprom one.
2621 */
2622
2623 /* user did not request i2c scanning => do it now */
2624 if (!dev->i2c_hash)
2625 em28xx_do_i2c_scan(dev);
2626
2627 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2628 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2629 dev->model = em28xx_i2c_hash[i].model;
2630 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2631 em28xx_errdev("Your board has no unique USB ID.\n");
2632 em28xx_errdev("A hint were successfully done, "
2633 "based on i2c devicelist hash.\n");
2634 em28xx_errdev("This method is not 100%% failproof.\n");
2635 em28xx_errdev("If the board were missdetected, "
2636 "please email this log to:\n");
2637 em28xx_errdev("\tV4L Mailing List "
2638 " <linux-media@vger.kernel.org>\n");
2639 em28xx_errdev("Board detected as %s\n",
2640 em28xx_boards[dev->model].name);
2641
2642 return 0;
2643 }
2644 }
2645
2646 em28xx_errdev("Your board has no unique USB ID and thus need a "
2647 "hint to be detected.\n");
2648 em28xx_errdev("You may try to use card=<n> insmod option to "
2649 "workaround that.\n");
2650 em28xx_errdev("Please send an email with this log to:\n");
2651 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2652 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2653 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2654
2655 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2656 " insmod option:\n");
2657 for (i = 0; i < em28xx_bcount; i++) {
2658 em28xx_errdev(" card=%d -> %s\n",
2659 i, em28xx_boards[i].name);
2660 }
2661 return -1;
2662 }
2663
2664 /* ----------------------------------------------------------------------- */
em28xx_register_i2c_ir(struct em28xx * dev)2665 void em28xx_register_i2c_ir(struct em28xx *dev)
2666 {
2667 /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
2668 /* at address 0x18, so if that address is needed for another board in */
2669 /* the future, please put it after 0x1f. */
2670 struct i2c_board_info info;
2671 const unsigned short addr_list[] = {
2672 0x1f, 0x30, 0x47, I2C_CLIENT_END
2673 };
2674
2675 if (disable_ir)
2676 return;
2677
2678 memset(&info, 0, sizeof(struct i2c_board_info));
2679 memset(&dev->init_data, 0, sizeof(dev->init_data));
2680 strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
2681
2682 /* detect & configure */
2683 switch (dev->model) {
2684 case EM2800_BOARD_TERRATEC_CINERGY_200:
2685 case EM2820_BOARD_TERRATEC_CINERGY_250:
2686 dev->init_data.ir_codes = RC_MAP_EM_TERRATEC;
2687 dev->init_data.get_key = em28xx_get_key_terratec;
2688 dev->init_data.name = "i2c IR (EM28XX Terratec)";
2689 break;
2690 case EM2820_BOARD_PINNACLE_USB_2:
2691 dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY;
2692 dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2693 dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2694 break;
2695 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2696 dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
2697 dev->init_data.get_key = em28xx_get_key_em_haup;
2698 dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
2699 break;
2700 case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
2701 dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
2702 dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
2703 dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
2704 break;
2705 }
2706
2707 if (dev->init_data.name)
2708 info.platform_data = &dev->init_data;
2709 i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
2710 }
2711
em28xx_card_setup(struct em28xx * dev)2712 void em28xx_card_setup(struct em28xx *dev)
2713 {
2714 /*
2715 * If the device can be a webcam, seek for a sensor.
2716 * If sensor is not found, then it isn't a webcam.
2717 */
2718 if (dev->board.is_webcam) {
2719 if (em28xx_hint_sensor(dev) < 0)
2720 dev->board.is_webcam = 0;
2721 else
2722 dev->progressive = 1;
2723 }
2724
2725 if (!dev->board.is_webcam) {
2726 switch (dev->model) {
2727 case EM2820_BOARD_UNKNOWN:
2728 case EM2800_BOARD_UNKNOWN:
2729 /*
2730 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2731 *
2732 * This occurs because they share identical USB vendor and
2733 * product IDs.
2734 *
2735 * What we do here is look up the EEPROM hash of the K-WORLD
2736 * and if it is found then we decide that we do not have
2737 * a DIGIVOX and reset the device to the K-WORLD instead.
2738 *
2739 * This solution is only valid if they do not share eeprom
2740 * hash identities which has not been determined as yet.
2741 */
2742 if (em28xx_hint_board(dev) < 0)
2743 em28xx_errdev("Board not discovered\n");
2744 else {
2745 em28xx_set_model(dev);
2746 em28xx_pre_card_setup(dev);
2747 }
2748 break;
2749 default:
2750 em28xx_set_model(dev);
2751 }
2752 }
2753
2754 em28xx_info("Identified as %s (card=%d)\n",
2755 dev->board.name, dev->model);
2756
2757 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2758 if (em28xx_boards[dev->model].tuner_addr)
2759 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2760
2761 if (em28xx_boards[dev->model].tda9887_conf)
2762 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2763
2764 /* request some modules */
2765 switch (dev->model) {
2766 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2767 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2768 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2769 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2770 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2771 {
2772 struct tveeprom tv;
2773 #if defined(CONFIG_MODULES) && defined(MODULE)
2774 request_module("tveeprom");
2775 #endif
2776 /* Call first TVeeprom */
2777
2778 dev->i2c_client.addr = 0xa0 >> 1;
2779 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2780
2781 dev->tuner_type = tv.tuner_type;
2782
2783 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2784 dev->i2s_speed = 2048000;
2785 dev->board.has_msp34xx = 1;
2786 }
2787 break;
2788 }
2789 case EM2882_BOARD_KWORLD_ATSC_315U:
2790 em28xx_write_reg(dev, 0x0d, 0x42);
2791 msleep(10);
2792 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2793 msleep(10);
2794 break;
2795 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2796 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2797 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2798 break;
2799 case EM2820_BOARD_UNKNOWN:
2800 case EM2800_BOARD_UNKNOWN:
2801 /*
2802 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2803 *
2804 * This occurs because they share identical USB vendor and
2805 * product IDs.
2806 *
2807 * What we do here is look up the EEPROM hash of the K-WORLD
2808 * and if it is found then we decide that we do not have
2809 * a DIGIVOX and reset the device to the K-WORLD instead.
2810 *
2811 * This solution is only valid if they do not share eeprom
2812 * hash identities which has not been determined as yet.
2813 */
2814 case EM2880_BOARD_MSI_DIGIVOX_AD:
2815 if (!em28xx_hint_board(dev))
2816 em28xx_set_model(dev);
2817
2818 /* In cases where we had to use a board hint, the call to
2819 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2820 so make the call now so the analog GPIOs are set properly
2821 before probing the i2c bus. */
2822 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2823 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2824 break;
2825
2826 /*
2827 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2828 *
2829 * This occurs because they share identical USB vendor and
2830 * product IDs.
2831 *
2832 * What we do here is look up the EEPROM hash of the Dikom
2833 * and if it is found then we decide that we do not have
2834 * a Kworld and reset the device to the Dikom instead.
2835 *
2836 * This solution is only valid if they do not share eeprom
2837 * hash identities which has not been determined as yet.
2838 */
2839 case EM2882_BOARD_KWORLD_VS_DVBT:
2840 if (!em28xx_hint_board(dev))
2841 em28xx_set_model(dev);
2842
2843 /* In cases where we had to use a board hint, the call to
2844 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2845 so make the call now so the analog GPIOs are set properly
2846 before probing the i2c bus. */
2847 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2848 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2849 break;
2850 }
2851
2852 #if defined(CONFIG_MODULES) && defined(MODULE)
2853 if (dev->board.has_ir_i2c && !disable_ir)
2854 request_module("ir-kbd-i2c");
2855 #endif
2856 if (dev->board.has_snapshot_button)
2857 em28xx_register_snapshot_button(dev);
2858
2859 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2860 em28xx_errdev("\n\n");
2861 em28xx_errdev("The support for this board weren't "
2862 "valid yet.\n");
2863 em28xx_errdev("Please send a report of having this working\n");
2864 em28xx_errdev("not to V4L mailing list (and/or to other "
2865 "addresses)\n\n");
2866 }
2867
2868 /* Allow override tuner type by a module parameter */
2869 if (tuner >= 0)
2870 dev->tuner_type = tuner;
2871
2872 /* request some modules */
2873 if (dev->board.has_msp34xx)
2874 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2875 "msp3400", 0, msp3400_addrs);
2876
2877 if (dev->board.decoder == EM28XX_SAA711X)
2878 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2879 "saa7115_auto", 0, saa711x_addrs);
2880
2881 if (dev->board.decoder == EM28XX_TVP5150)
2882 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2883 "tvp5150", 0, tvp5150_addrs);
2884
2885 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2886 struct mt9v011_platform_data pdata;
2887 struct i2c_board_info mt9v011_info = {
2888 .type = "mt9v011",
2889 .addr = 0xba >> 1,
2890 .platform_data = &pdata,
2891 };
2892
2893 pdata.xtal = dev->sensor_xtal;
2894 v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
2895 &mt9v011_info, NULL);
2896 }
2897
2898
2899 if (dev->board.adecoder == EM28XX_TVAUDIO)
2900 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2901 "tvaudio", dev->board.tvaudio_addr, NULL);
2902
2903 if (dev->board.tuner_type != TUNER_ABSENT) {
2904 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2905
2906 if (dev->board.radio.type)
2907 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2908 "tuner", dev->board.radio_addr, NULL);
2909
2910 if (has_demod)
2911 v4l2_i2c_new_subdev(&dev->v4l2_dev,
2912 &dev->i2c_adap, "tuner",
2913 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2914 if (dev->tuner_addr == 0) {
2915 enum v4l2_i2c_tuner_type type =
2916 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2917 struct v4l2_subdev *sd;
2918
2919 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2920 &dev->i2c_adap, "tuner",
2921 0, v4l2_i2c_tuner_addrs(type));
2922
2923 if (sd)
2924 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2925 } else {
2926 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2927 "tuner", dev->tuner_addr, NULL);
2928 }
2929 }
2930
2931 em28xx_tuner_setup(dev);
2932
2933 if(!disable_ir)
2934 em28xx_ir_init(dev);
2935 }
2936
2937
2938 #if defined(CONFIG_MODULES) && defined(MODULE)
request_module_async(struct work_struct * work)2939 static void request_module_async(struct work_struct *work)
2940 {
2941 struct em28xx *dev = container_of(work,
2942 struct em28xx, request_module_wk);
2943
2944 if (dev->has_audio_class)
2945 request_module("snd-usb-audio");
2946 else if (dev->has_alsa_audio)
2947 request_module("em28xx-alsa");
2948
2949 if (dev->board.has_dvb)
2950 request_module("em28xx-dvb");
2951 }
2952
request_modules(struct em28xx * dev)2953 static void request_modules(struct em28xx *dev)
2954 {
2955 INIT_WORK(&dev->request_module_wk, request_module_async);
2956 schedule_work(&dev->request_module_wk);
2957 }
2958
flush_request_modules(struct em28xx * dev)2959 static void flush_request_modules(struct em28xx *dev)
2960 {
2961 flush_work_sync(&dev->request_module_wk);
2962 }
2963 #else
2964 #define request_modules(dev)
2965 #define flush_request_modules(dev)
2966 #endif /* CONFIG_MODULES */
2967
2968 /*
2969 * em28xx_release_resources()
2970 * unregisters the v4l2,i2c and usb devices
2971 * called when the device gets disconnected or at module unload
2972 */
em28xx_release_resources(struct em28xx * dev)2973 void em28xx_release_resources(struct em28xx *dev)
2974 {
2975 if (dev->sbutton_input_dev)
2976 em28xx_deregister_snapshot_button(dev);
2977
2978 if (dev->ir)
2979 em28xx_ir_fini(dev);
2980
2981 /*FIXME: I2C IR should be disconnected */
2982
2983 em28xx_release_analog_resources(dev);
2984
2985 em28xx_i2c_unregister(dev);
2986
2987 v4l2_device_unregister(&dev->v4l2_dev);
2988
2989 usb_put_dev(dev->udev);
2990
2991 /* Mark device as unused */
2992 clear_bit(dev->devno, &em28xx_devused);
2993 };
2994
2995 /*
2996 * em28xx_init_dev()
2997 * allocates and inits the device structs, registers i2c bus and v4l device
2998 */
em28xx_init_dev(struct em28xx * dev,struct usb_device * udev,struct usb_interface * interface,int minor)2999 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
3000 struct usb_interface *interface,
3001 int minor)
3002 {
3003 int retval;
3004
3005 dev->udev = udev;
3006 mutex_init(&dev->ctrl_urb_lock);
3007 spin_lock_init(&dev->slock);
3008 init_waitqueue_head(&dev->open);
3009 init_waitqueue_head(&dev->wait_frame);
3010 init_waitqueue_head(&dev->wait_stream);
3011
3012 dev->em28xx_write_regs = em28xx_write_regs;
3013 dev->em28xx_read_reg = em28xx_read_reg;
3014 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
3015 dev->em28xx_write_regs_req = em28xx_write_regs_req;
3016 dev->em28xx_read_reg_req = em28xx_read_reg_req;
3017 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
3018
3019 em28xx_set_model(dev);
3020
3021 /* Set the default GPO/GPIO for legacy devices */
3022 dev->reg_gpo_num = EM2880_R04_GPO;
3023 dev->reg_gpio_num = EM28XX_R08_GPIO;
3024
3025 dev->wait_after_write = 5;
3026
3027 /* Based on the Chip ID, set the device configuration */
3028 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
3029 if (retval > 0) {
3030 dev->chip_id = retval;
3031
3032 switch (dev->chip_id) {
3033 case CHIP_ID_EM2800:
3034 em28xx_info("chip ID is em2800\n");
3035 break;
3036 case CHIP_ID_EM2710:
3037 em28xx_info("chip ID is em2710\n");
3038 break;
3039 case CHIP_ID_EM2750:
3040 em28xx_info("chip ID is em2750\n");
3041 break;
3042 case CHIP_ID_EM2820:
3043 em28xx_info("chip ID is em2820 (or em2710)\n");
3044 break;
3045 case CHIP_ID_EM2840:
3046 em28xx_info("chip ID is em2840\n");
3047 break;
3048 case CHIP_ID_EM2860:
3049 em28xx_info("chip ID is em2860\n");
3050 break;
3051 case CHIP_ID_EM2870:
3052 em28xx_info("chip ID is em2870\n");
3053 dev->wait_after_write = 0;
3054 break;
3055 case CHIP_ID_EM2874:
3056 em28xx_info("chip ID is em2874\n");
3057 dev->reg_gpio_num = EM2874_R80_GPIO;
3058 dev->wait_after_write = 0;
3059 break;
3060 case CHIP_ID_EM28174:
3061 em28xx_info("chip ID is em28174\n");
3062 dev->reg_gpio_num = EM2874_R80_GPIO;
3063 dev->wait_after_write = 0;
3064 break;
3065 case CHIP_ID_EM2883:
3066 em28xx_info("chip ID is em2882/em2883\n");
3067 dev->wait_after_write = 0;
3068 break;
3069 case CHIP_ID_EM2884:
3070 em28xx_info("chip ID is em2884\n");
3071 dev->reg_gpio_num = EM2874_R80_GPIO;
3072 dev->wait_after_write = 0;
3073 break;
3074 default:
3075 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
3076 }
3077 }
3078
3079 if (dev->is_audio_only) {
3080 retval = em28xx_audio_setup(dev);
3081 if (retval)
3082 return -ENODEV;
3083 em28xx_init_extension(dev);
3084
3085 return 0;
3086 }
3087
3088 /* Prepopulate cached GPO register content */
3089 retval = em28xx_read_reg(dev, dev->reg_gpo_num);
3090 if (retval >= 0)
3091 dev->reg_gpo = retval;
3092
3093 em28xx_pre_card_setup(dev);
3094
3095 if (!dev->board.is_em2800) {
3096 /* Resets I2C speed */
3097 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
3098 if (retval < 0) {
3099 em28xx_errdev("%s: em28xx_write_reg failed!"
3100 " retval [%d]\n",
3101 __func__, retval);
3102 return retval;
3103 }
3104 }
3105
3106 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
3107 if (retval < 0) {
3108 em28xx_errdev("Call to v4l2_device_register() failed!\n");
3109 return retval;
3110 }
3111
3112 /* register i2c bus */
3113 retval = em28xx_i2c_register(dev);
3114 if (retval < 0) {
3115 em28xx_errdev("%s: em28xx_i2c_register - error [%d]!\n",
3116 __func__, retval);
3117 goto unregister_dev;
3118 }
3119
3120 /*
3121 * Default format, used for tvp5150 or saa711x output formats
3122 */
3123 dev->vinmode = 0x10;
3124 dev->vinctl = EM28XX_VINCTRL_INTERLACED |
3125 EM28XX_VINCTRL_CCIR656_ENABLE;
3126
3127 /* Do board specific init and eeprom reading */
3128 em28xx_card_setup(dev);
3129
3130 /* Configure audio */
3131 retval = em28xx_audio_setup(dev);
3132 if (retval < 0) {
3133 em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
3134 __func__, retval);
3135 goto fail;
3136 }
3137
3138 /* wake i2c devices */
3139 em28xx_wake_i2c(dev);
3140
3141 /* init video dma queues */
3142 INIT_LIST_HEAD(&dev->vidq.active);
3143 INIT_LIST_HEAD(&dev->vidq.queued);
3144 INIT_LIST_HEAD(&dev->vbiq.active);
3145 INIT_LIST_HEAD(&dev->vbiq.queued);
3146
3147 if (dev->board.has_msp34xx) {
3148 /* Send a reset to other chips via gpio */
3149 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
3150 if (retval < 0) {
3151 em28xx_errdev("%s: em28xx_write_reg - "
3152 "msp34xx(1) failed! error [%d]\n",
3153 __func__, retval);
3154 goto fail;
3155 }
3156 msleep(3);
3157
3158 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
3159 if (retval < 0) {
3160 em28xx_errdev("%s: em28xx_write_reg - "
3161 "msp34xx(2) failed! error [%d]\n",
3162 __func__, retval);
3163 goto fail;
3164 }
3165 msleep(3);
3166 }
3167
3168 retval = em28xx_register_analog_devices(dev);
3169 if (retval < 0) {
3170 goto fail;
3171 }
3172
3173 /* Save some power by putting tuner to sleep */
3174 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
3175
3176 return 0;
3177
3178 fail:
3179 em28xx_i2c_unregister(dev);
3180
3181 unregister_dev:
3182 v4l2_device_unregister(&dev->v4l2_dev);
3183
3184 return retval;
3185 }
3186
3187 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3188 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3189
3190 /*
3191 * em28xx_usb_probe()
3192 * checks for supported devices
3193 */
em28xx_usb_probe(struct usb_interface * interface,const struct usb_device_id * id)3194 static int em28xx_usb_probe(struct usb_interface *interface,
3195 const struct usb_device_id *id)
3196 {
3197 struct usb_device *udev;
3198 struct em28xx *dev = NULL;
3199 int retval;
3200 bool has_audio = false, has_video = false, has_dvb = false;
3201 int i, nr;
3202 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
3203 char *speed;
3204
3205 udev = usb_get_dev(interface_to_usbdev(interface));
3206
3207 /* Check to see next free device and mark as used */
3208 do {
3209 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
3210 if (nr >= EM28XX_MAXBOARDS) {
3211 /* No free device slots */
3212 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3213 EM28XX_MAXBOARDS);
3214 retval = -ENOMEM;
3215 goto err_no_slot;
3216 }
3217 } while (test_and_set_bit(nr, &em28xx_devused));
3218
3219 /* Don't register audio interfaces */
3220 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3221 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
3222 "interface %i, class %i\n",
3223 le16_to_cpu(udev->descriptor.idVendor),
3224 le16_to_cpu(udev->descriptor.idProduct),
3225 ifnum,
3226 interface->altsetting[0].desc.bInterfaceClass);
3227
3228 retval = -ENODEV;
3229 goto err;
3230 }
3231
3232 /* allocate memory for our device state and initialize it */
3233 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3234 if (dev == NULL) {
3235 em28xx_err(DRIVER_NAME ": out of memory!\n");
3236 retval = -ENOMEM;
3237 goto err;
3238 }
3239
3240 /* compute alternate max packet sizes */
3241 dev->alt_max_pkt_size = kmalloc(sizeof(dev->alt_max_pkt_size[0]) *
3242 interface->num_altsetting, GFP_KERNEL);
3243 if (dev->alt_max_pkt_size == NULL) {
3244 em28xx_errdev("out of memory!\n");
3245 kfree(dev);
3246 retval = -ENOMEM;
3247 goto err;
3248 }
3249
3250 /* Get endpoints */
3251 for (i = 0; i < interface->num_altsetting; i++) {
3252 int ep;
3253
3254 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
3255 const struct usb_endpoint_descriptor *e;
3256 int sizedescr, size;
3257
3258 e = &interface->altsetting[i].endpoint[ep].desc;
3259
3260 sizedescr = le16_to_cpu(e->wMaxPacketSize);
3261 size = sizedescr & 0x7ff;
3262
3263 if (udev->speed == USB_SPEED_HIGH)
3264 size = size * hb_mult(sizedescr);
3265
3266 if (usb_endpoint_xfer_isoc(e) &&
3267 usb_endpoint_dir_in(e)) {
3268 switch (e->bEndpointAddress) {
3269 case EM28XX_EP_AUDIO:
3270 has_audio = true;
3271 break;
3272 case EM28XX_EP_ANALOG:
3273 has_video = true;
3274 dev->alt_max_pkt_size[i] = size;
3275 break;
3276 case EM28XX_EP_DIGITAL:
3277 has_dvb = true;
3278 if (size > dev->dvb_max_pkt_size) {
3279 dev->dvb_max_pkt_size = size;
3280 dev->dvb_alt = i;
3281 }
3282 break;
3283 }
3284 }
3285 }
3286 }
3287
3288 if (!(has_audio || has_video || has_dvb)) {
3289 retval = -ENODEV;
3290 goto err_free;
3291 }
3292
3293 switch (udev->speed) {
3294 case USB_SPEED_LOW:
3295 speed = "1.5";
3296 break;
3297 case USB_SPEED_UNKNOWN:
3298 case USB_SPEED_FULL:
3299 speed = "12";
3300 break;
3301 case USB_SPEED_HIGH:
3302 speed = "480";
3303 break;
3304 default:
3305 speed = "unknown";
3306 }
3307
3308 printk(KERN_INFO DRIVER_NAME
3309 ": New device %s %s @ %s Mbps "
3310 "(%04x:%04x, interface %d, class %d)\n",
3311 udev->manufacturer ? udev->manufacturer : "",
3312 udev->product ? udev->product : "",
3313 speed,
3314 le16_to_cpu(udev->descriptor.idVendor),
3315 le16_to_cpu(udev->descriptor.idProduct),
3316 ifnum,
3317 interface->altsetting->desc.bInterfaceNumber);
3318
3319 if (has_audio)
3320 printk(KERN_INFO DRIVER_NAME
3321 ": Audio Vendor Class interface %i found\n",
3322 ifnum);
3323 if (has_video)
3324 printk(KERN_INFO DRIVER_NAME
3325 ": Video interface %i found\n",
3326 ifnum);
3327 if (has_dvb)
3328 printk(KERN_INFO DRIVER_NAME
3329 ": DVB interface %i found\n",
3330 ifnum);
3331
3332 /*
3333 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3334 * video stream wouldn't likely work, since 12 Mbps is generally
3335 * not enough even for most Digital TV streams.
3336 */
3337 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3338 printk(DRIVER_NAME ": Device initialization failed.\n");
3339 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3340 " USB 2.0 port.\n");
3341 retval = -ENODEV;
3342 goto err_free;
3343 }
3344
3345 snprintf(dev->name, sizeof(dev->name), "em28xx #%d", nr);
3346 dev->devno = nr;
3347 dev->model = id->driver_info;
3348 dev->alt = -1;
3349 dev->is_audio_only = has_audio && !(has_video || has_dvb);
3350 dev->has_alsa_audio = has_audio;
3351 dev->audio_ifnum = ifnum;
3352
3353 /* Checks if audio is provided by some interface */
3354 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3355 struct usb_interface *uif = udev->config->interface[i];
3356 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3357 dev->has_audio_class = 1;
3358 break;
3359 }
3360 }
3361
3362 dev->num_alt = interface->num_altsetting;
3363
3364 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
3365 dev->model = card[nr];
3366
3367 /* save our data pointer in this interface device */
3368 usb_set_intfdata(interface, dev);
3369
3370 /* allocate device struct */
3371 mutex_init(&dev->lock);
3372 mutex_lock(&dev->lock);
3373 retval = em28xx_init_dev(dev, udev, interface, nr);
3374 if (retval) {
3375 goto unlock_and_free;
3376 }
3377
3378 if (has_dvb) {
3379 /* pre-allocate DVB isoc transfer buffers */
3380 retval = em28xx_alloc_isoc(dev, EM28XX_DIGITAL_MODE,
3381 EM28XX_DVB_MAX_PACKETS,
3382 EM28XX_DVB_NUM_BUFS,
3383 dev->dvb_max_pkt_size);
3384 if (retval) {
3385 goto unlock_and_free;
3386 }
3387 }
3388
3389 request_modules(dev);
3390
3391 /* Should be the last thing to do, to avoid newer udev's to
3392 open the device before fully initializing it
3393 */
3394 mutex_unlock(&dev->lock);
3395
3396 /*
3397 * These extensions can be modules. If the modules are already
3398 * loaded then we can initialise the device now, otherwise we
3399 * will initialise it when the modules load instead.
3400 */
3401 em28xx_init_extension(dev);
3402
3403 return 0;
3404
3405 unlock_and_free:
3406 mutex_unlock(&dev->lock);
3407
3408 err_free:
3409 kfree(dev->alt_max_pkt_size);
3410 kfree(dev);
3411
3412 err:
3413 clear_bit(nr, &em28xx_devused);
3414
3415 err_no_slot:
3416 usb_put_dev(udev);
3417 return retval;
3418 }
3419
3420 /*
3421 * em28xx_usb_disconnect()
3422 * called when the device gets disconnected
3423 * video device will be unregistered on v4l2_close in case it is still open
3424 */
em28xx_usb_disconnect(struct usb_interface * interface)3425 static void em28xx_usb_disconnect(struct usb_interface *interface)
3426 {
3427 struct em28xx *dev;
3428
3429 dev = usb_get_intfdata(interface);
3430 usb_set_intfdata(interface, NULL);
3431
3432 if (!dev)
3433 return;
3434
3435 if (dev->is_audio_only) {
3436 mutex_lock(&dev->lock);
3437 em28xx_close_extension(dev);
3438 mutex_unlock(&dev->lock);
3439 return;
3440 }
3441
3442 em28xx_info("disconnecting %s\n", dev->vdev->name);
3443
3444 flush_request_modules(dev);
3445
3446 /* wait until all current v4l2 io is finished then deallocate
3447 resources */
3448 mutex_lock(&dev->lock);
3449
3450 wake_up_interruptible_all(&dev->open);
3451
3452 v4l2_device_disconnect(&dev->v4l2_dev);
3453
3454 if (dev->users) {
3455 em28xx_warn
3456 ("device %s is open! Deregistration and memory "
3457 "deallocation are deferred on close.\n",
3458 video_device_node_name(dev->vdev));
3459
3460 dev->state |= DEV_MISCONFIGURED;
3461 em28xx_uninit_isoc(dev, dev->mode);
3462 dev->state |= DEV_DISCONNECTED;
3463 wake_up_interruptible(&dev->wait_frame);
3464 wake_up_interruptible(&dev->wait_stream);
3465 } else {
3466 dev->state |= DEV_DISCONNECTED;
3467 em28xx_release_resources(dev);
3468 }
3469
3470 /* free DVB isoc buffers */
3471 em28xx_uninit_isoc(dev, EM28XX_DIGITAL_MODE);
3472
3473 mutex_unlock(&dev->lock);
3474
3475 em28xx_close_extension(dev);
3476
3477 if (!dev->users) {
3478 kfree(dev->alt_max_pkt_size);
3479 kfree(dev);
3480 }
3481 }
3482
3483 static struct usb_driver em28xx_usb_driver = {
3484 .name = "em28xx",
3485 .probe = em28xx_usb_probe,
3486 .disconnect = em28xx_usb_disconnect,
3487 .id_table = em28xx_id_table,
3488 };
3489
3490 module_usb_driver(em28xx_usb_driver);
3491