1#
2# Appletalk driver configuration
3#
4config ATALK
5	tristate "Appletalk protocol support"
6	select LLC
7	---help---
8	  AppleTalk is the protocol that Apple computers can use to communicate
9	  on a network.  If your Linux box is connected to such a network and you
10	  wish to connect to it, say Y.  You will need to use the netatalk package
11	  so that your Linux box can act as a print and file server for Macs as
12	  well as access AppleTalk printers.  Check out
13	  <http://www.zettabyte.net/netatalk/> on the WWW for details.
14	  EtherTalk is the name used for AppleTalk over Ethernet and the
15	  cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
16	  network using serial links.  EtherTalk and LocalTalk are fully
17	  supported by Linux.
18
19	  General information about how to connect Linux, Windows machines and
20	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
21	  NET3-4-HOWTO, available from
22	  <http://www.tldp.org/docs.html#howto>, contains valuable
23	  information as well.
24
25	  To compile this driver as a module, choose M here: the module will be
26	  called appletalk. You almost certainly want to compile it as a
27	  module so you can restart your AppleTalk stack without rebooting
28	  your machine. I hear that the GNU boycott of Apple is over, so
29	  even politically correct people are allowed to say Y here.
30
31config DEV_APPLETALK
32	tristate "Appletalk interfaces support"
33	depends on ATALK
34	help
35	  AppleTalk is the protocol that Apple computers can use to communicate
36	  on a network.  If your Linux box is connected to such a network, and wish
37	  to do IP over it, or you have a LocalTalk card and wish to use it to
38	  connect to the AppleTalk network, say Y.
39
40
41config LTPC
42	tristate "Apple/Farallon LocalTalk PC support"
43	depends on DEV_APPLETALK && (ISA || EISA) && ISA_DMA_API
44	help
45	  This allows you to use the AppleTalk PC card to connect to LocalTalk
46	  networks. The card is also known as the Farallon PhoneNet PC card.
47	  If you are in doubt, this card is the one with the 65C02 chip on it.
48	  You also need version 1.3.3 or later of the netatalk package.
49	  This driver is experimental, which means that it may not work.
50	  See the file <file:Documentation/networking/ltpc.txt>.
51
52config COPS
53	tristate "COPS LocalTalk PC support"
54	depends on DEV_APPLETALK && (ISA || EISA)
55	help
56	  This allows you to use COPS AppleTalk cards to connect to LocalTalk
57	  networks. You also need version 1.3.3 or later of the netatalk
58	  package. This driver is experimental, which means that it may not
59	  work. This driver will only work if you choose "AppleTalk DDP"
60	  networking support, above.
61	  Please read the file <file:Documentation/networking/cops.txt>.
62
63config COPS_DAYNA
64	bool "Dayna firmware support"
65	depends on COPS
66	help
67	  Support COPS compatible cards with Dayna style firmware (Dayna
68	  DL2000/ Daynatalk/PC (half length), COPS LT-95, Farallon PhoneNET PC
69	  III, Farallon PhoneNET PC II).
70
71config COPS_TANGENT
72	bool "Tangent firmware support"
73	depends on COPS
74	help
75	  Support COPS compatible cards with Tangent style firmware (Tangent
76	  ATB_II, Novell NL-1000, Daystar Digital LT-200.
77
78config IPDDP
79	tristate "Appletalk-IP driver support"
80	depends on DEV_APPLETALK && ATALK
81	---help---
82	  This allows IP networking for users who only have AppleTalk
83	  networking available. This feature is experimental. With this
84	  driver, you can encapsulate IP inside AppleTalk (e.g. if your Linux
85	  box is stuck on an AppleTalk only network) or decapsulate (e.g. if
86	  you want your Linux box to act as an Internet gateway for a zoo of
87	  AppleTalk connected Macs). Please see the file
88	  <file:Documentation/networking/ipddp.txt> for more information.
89
90	  If you say Y here, the AppleTalk-IP support will be compiled into
91	  the kernel. In this case, you can either use encapsulation or
92	  decapsulation, but not both. With the following two questions, you
93	  decide which one you want.
94
95	  To compile the AppleTalk-IP support as a module, choose M here: the
96	  module will be called ipddp.
97	  In this case, you will be able to use both encapsulation and
98	  decapsulation simultaneously, by loading two copies of the module
99	  and specifying different values for the module option ipddp_mode.
100
101config IPDDP_ENCAP
102	bool "IP to Appletalk-IP Encapsulation support"
103	depends on IPDDP
104	help
105	  If you say Y here, the AppleTalk-IP code will be able to encapsulate
106	  IP packets inside AppleTalk frames; this is useful if your Linux box
107	  is stuck on an AppleTalk network (which hopefully contains a
108	  decapsulator somewhere). Please see
109	  <file:Documentation/networking/ipddp.txt> for more information. If
110	  you said Y to "AppleTalk-IP driver support" above and you say Y
111	  here, then you cannot say Y to "AppleTalk-IP to IP Decapsulation
112	  support", below.
113
114config IPDDP_DECAP
115	bool "Appletalk-IP to IP Decapsulation support"
116	depends on IPDDP
117	help
118	  If you say Y here, the AppleTalk-IP code will be able to decapsulate
119	  AppleTalk-IP frames to IP packets; this is useful if you want your
120	  Linux box to act as an Internet gateway for an AppleTalk network.
121	  Please see <file:Documentation/networking/ipddp.txt> for more
122	  information.  If you said Y to "AppleTalk-IP driver support" above
123	  and you say Y here, then you cannot say Y to "IP to AppleTalk-IP
124	  Encapsulation support", above.
125
126