1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Input misc drivers configuration
4#
5menuconfig INPUT_MISC
6	bool "Miscellaneous devices"
7	help
8	  Say Y here, and a list of miscellaneous input drivers will be displayed.
9	  Everything that didn't fit into the other categories is here. This option
10	  doesn't affect the kernel.
11
12	  If unsure, say Y.
13
14if INPUT_MISC
15
16config INPUT_88PM860X_ONKEY
17	tristate "88PM860x ONKEY support"
18	depends on MFD_88PM860X
19	help
20	  Support the ONKEY of Marvell 88PM860x PMICs as an input device
21	  reporting power button status.
22
23	  To compile this driver as a module, choose M here: the module
24	  will be called 88pm860x_onkey.
25
26config INPUT_88PM80X_ONKEY
27	tristate "88PM80x ONKEY support"
28	depends on MFD_88PM800
29	help
30	  Support the ONKEY of Marvell 88PM80x PMICs as an input device
31	  reporting power button status.
32
33	  To compile this driver as a module, choose M here: the module
34	  will be called 88pm80x_onkey.
35
36config INPUT_AB8500_PONKEY
37	tristate "AB8500 Pon (PowerOn) Key"
38	depends on AB8500_CORE
39	help
40	  Say Y here to use the PowerOn Key for ST-Ericsson's AB8500
41	  Mix-Sig PMIC.
42
43	  To compile this driver as a module, choose M here: the module
44	  will be called ab8500-ponkey.
45
46config INPUT_AD714X
47	tristate "Analog Devices AD714x Capacitance Touch Sensor"
48	help
49	  Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
50
51	  You should select a bus connection too.
52
53	  To compile this driver as a module, choose M here: the
54	  module will be called ad714x.
55
56config INPUT_AD714X_I2C
57	tristate "support I2C bus connection"
58	depends on INPUT_AD714X && I2C
59	default y
60	help
61	  Say Y here if you have AD7142/AD7147 hooked to an I2C bus.
62
63	  To compile this driver as a module, choose M here: the
64	  module will be called ad714x-i2c.
65
66config INPUT_AD714X_SPI
67	tristate "support SPI bus connection"
68	depends on INPUT_AD714X && SPI
69	default y
70	help
71	  Say Y here if you have AD7142/AD7147 hooked to a SPI bus.
72
73	  To compile this driver as a module, choose M here: the
74	  module will be called ad714x-spi.
75
76config INPUT_ARIEL_PWRBUTTON
77	tristate "Dell Wyse 3020 Power Button Driver"
78	depends on SPI
79	depends on MACH_MMP3_DT || COMPILE_TEST
80	help
81	  Say Y to enable support for reporting power button status on
82	  on Dell Wyse 3020 ("Ariel") thin client.
83
84	  To compile this driver as a module, choose M here: the module
85	  will be called ariel-pwrbutton.
86
87config INPUT_ARIZONA_HAPTICS
88	tristate "Arizona haptics support"
89	depends on MFD_ARIZONA && SND_SOC
90	select INPUT_FF_MEMLESS
91	help
92	  Say Y to enable support for the haptics module in Arizona CODECs.
93
94	  To compile this driver as a module, choose M here: the
95	  module will be called arizona-haptics.
96
97config INPUT_ATC260X_ONKEY
98	tristate "Actions Semi ATC260x PMIC ONKEY"
99	depends on MFD_ATC260X
100	help
101	  Support the ONKEY of ATC260x PMICs as an input device reporting
102	  power button status. ONKEY can be used to wakeup from low power
103	  modes and force a reset on long press.
104
105	  To compile this driver as a module, choose M here: the
106	  module will be called atc260x-onkey.
107
108config INPUT_ATMEL_CAPTOUCH
109	tristate "Atmel Capacitive Touch Button Driver"
110	depends on OF || COMPILE_TEST
111	depends on I2C
112	help
113	  Say Y here if an Atmel Capacitive Touch Button device which
114	  implements "captouch" protocol is connected to I2C bus. Typically
115	  this device consists of Atmel Touch sensor controlled by AtMegaXX
116	  MCU running firmware based on Qtouch library.
117	  One should find "atmel,captouch" node in the board specific DTS.
118
119	  To compile this driver as a module, choose M here: the
120	  module will be called atmel_captouch.
121
122config INPUT_BMA150
123	tristate "BMA150/SMB380 acceleration sensor support"
124	depends on I2C
125	help
126	  Say Y here if you have Bosch Sensortec's BMA150 or SMB380
127	  acceleration sensor hooked to an I2C bus.
128
129	  To compile this driver as a module, choose M here: the
130	  module will be called bma150.
131
132config INPUT_E3X0_BUTTON
133	tristate "NI Ettus Research USRP E3xx Button support."
134	default n
135	help
136	  Say Y here to enable support for the NI Ettus Research
137	  USRP E3xx Button.
138
139	  To compile this driver as a module, choose M here: the
140	  module will be called e3x0_button.
141
142config INPUT_PCSPKR
143	tristate "PC Speaker support"
144	depends on PCSPKR_PLATFORM
145	help
146	  Say Y here if you want the standard PC Speaker to be used for
147	  bells and whistles.
148
149	  If unsure, say Y.
150
151	  To compile this driver as a module, choose M here: the
152	  module will be called pcspkr.
153
154config INPUT_PM8941_PWRKEY
155	tristate "Qualcomm PM8941 power key support"
156	depends on MFD_SPMI_PMIC
157	help
158	  Say Y here if you want support for the power key usually found
159	  on boards using a Qualcomm PM8941 compatible PMIC.
160
161	  If unsure, say Y.
162
163	  To compile this driver as a module, choose M here: the module
164	  will be called pm8941-pwrkey.
165
166config INPUT_PM8XXX_VIBRATOR
167	tristate "Qualcomm PM8XXX vibrator support"
168	depends on MFD_PM8XXX || MFD_SPMI_PMIC
169	select INPUT_FF_MEMLESS
170	help
171	  This option enables device driver support for the vibrator
172	  on Qualcomm PM8xxx chip. This driver supports ff-memless interface
173	  from input framework.
174
175	  To compile this driver as module, choose M here: the
176	  module will be called pm8xxx-vibrator.
177
178config INPUT_PMIC8XXX_PWRKEY
179	tristate "PMIC8XXX power key support"
180	depends on MFD_PM8XXX
181	help
182	  Say Y here if you want support for the PMIC8XXX power key.
183
184	  If unsure, say N.
185
186	  To compile this driver as a module, choose M here: the
187	  module will be called pmic8xxx-pwrkey.
188
189config INPUT_SPARCSPKR
190	tristate "SPARC Speaker support"
191	depends on PCI && SPARC64
192	help
193	  Say Y here if you want the standard Speaker on Sparc PCI systems
194	  to be used for bells and whistles.
195
196	  If unsure, say Y.
197
198	  To compile this driver as a module, choose M here: the
199	  module will be called sparcspkr.
200
201config INPUT_M68K_BEEP
202	tristate "M68k Beeper support"
203	depends on M68K
204
205config INPUT_MAX77650_ONKEY
206	tristate "Maxim MAX77650 ONKEY support"
207	depends on MFD_MAX77650
208	help
209	  Support the ONKEY of the MAX77650 PMIC as an input device.
210
211	  To compile this driver as a module, choose M here: the module
212	  will be called max77650-onkey.
213
214config INPUT_MAX77693_HAPTIC
215	tristate "MAXIM MAX77693/MAX77843 haptic controller support"
216	depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
217	select INPUT_FF_MEMLESS
218	help
219	  This option enables support for the haptic controller on
220	  MAXIM MAX77693 and MAX77843 chips.
221
222	  To compile this driver as module, choose M here: the
223	  module will be called max77693-haptic.
224
225config INPUT_MAX8925_ONKEY
226	tristate "MAX8925 ONKEY support"
227	depends on MFD_MAX8925
228	help
229	  Support the ONKEY of MAX8925 PMICs as an input device
230	  reporting power button status.
231
232	  To compile this driver as a module, choose M here: the module
233	  will be called max8925_onkey.
234
235config INPUT_MAX8997_HAPTIC
236	tristate "MAXIM MAX8997 haptic controller support"
237	depends on PWM && MFD_MAX8997
238	select INPUT_FF_MEMLESS
239	help
240	  This option enables device driver support for the haptic controller
241	  on MAXIM MAX8997 chip. This driver supports ff-memless interface
242	  from input framework.
243
244	  To compile this driver as module, choose M here: the
245	  module will be called max8997-haptic.
246
247config INPUT_MC13783_PWRBUTTON
248	tristate "MC13783 ON buttons"
249	depends on MFD_MC13XXX
250	help
251	  Support the ON buttons of MC13783 PMIC as an input device
252	  reporting power button status.
253
254	  To compile this driver as a module, choose M here: the module
255	  will be called mc13783-pwrbutton.
256
257config INPUT_MMA8450
258	tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
259	depends on I2C
260	help
261	  Say Y here if you want to support Freescale's MMA8450 Accelerometer
262	  through I2C interface.
263
264	  To compile this driver as a module, choose M here: the
265	  module will be called mma8450.
266
267config INPUT_APANEL
268	tristate "Fujitsu Lifebook Application Panel buttons"
269	depends on X86 && I2C && LEDS_CLASS
270	select CHECK_SIGNATURE
271	help
272	 Say Y here for support of the Application Panel buttons, used on
273	 Fujitsu Lifebook. These are attached to the mainboard through
274	 an SMBus interface managed by the I2C Intel ICH (i801) driver,
275	 which you should also build for this kernel.
276
277	 To compile this driver as a module, choose M here: the module will
278	 be called apanel.
279
280config INPUT_GPIO_BEEPER
281	tristate "Generic GPIO Beeper support"
282	depends on GPIOLIB || COMPILE_TEST
283	help
284	  Say Y here if you have a beeper connected to a GPIO pin.
285
286	  To compile this driver as a module, choose M here: the
287	  module will be called gpio-beeper.
288
289config INPUT_GPIO_DECODER
290	tristate "Polled GPIO Decoder Input driver"
291	depends on GPIOLIB || COMPILE_TEST
292	help
293	 Say Y here if you want driver to read status of multiple GPIO
294	 lines and report the encoded value as an absolute integer to
295	 input subsystem.
296
297	 To compile this driver as a module, choose M here: the module
298	 will be called gpio_decoder.
299
300config INPUT_GPIO_VIBRA
301	tristate "GPIO vibrator support"
302	depends on GPIOLIB || COMPILE_TEST
303	select INPUT_FF_MEMLESS
304	help
305	  Say Y here to get support for GPIO based vibrator devices.
306
307	  If unsure, say N.
308
309	  To compile this driver as a module, choose M here: the module will be
310	  called gpio-vibra.
311
312config INPUT_COBALT_BTNS
313	tristate "Cobalt button interface"
314	depends on MIPS_COBALT
315	help
316	  Say Y here if you want to support MIPS Cobalt button interface.
317
318	  To compile this driver as a module, choose M here: the
319	  module will be called cobalt_btns.
320
321config INPUT_CPCAP_PWRBUTTON
322	tristate "CPCAP OnKey"
323	depends on MFD_CPCAP
324	help
325	  Say Y here if you want to enable power key reporting via the
326	  Motorola CPCAP chip.
327
328	  To compile this driver as a module, choose M here. The module will
329	  be called cpcap-pwrbutton.
330
331config INPUT_WISTRON_BTNS
332	tristate "x86 Wistron laptop button interface"
333	depends on X86_32
334	select INPUT_SPARSEKMAP
335	select NEW_LEDS
336	select LEDS_CLASS
337	select CHECK_SIGNATURE
338	help
339	  Say Y here for support of Wistron laptop button interfaces, used on
340	  laptops of various brands, including Acer and Fujitsu-Siemens. If
341	  available, mail and wifi LEDs will be controllable via /sys/class/leds.
342
343	  To compile this driver as a module, choose M here: the module will
344	  be called wistron_btns.
345
346config INPUT_ATLAS_BTNS
347	tristate "x86 Atlas button interface"
348	depends on X86 && ACPI
349	help
350	  Say Y here for support of Atlas wallmount touchscreen buttons.
351	  The events will show up as scancodes F1 through F9 via evdev.
352
353	  To compile this driver as a module, choose M here: the module will
354	  be called atlas_btns.
355
356config INPUT_ATI_REMOTE2
357	tristate "ATI / Philips USB RF remote control"
358	depends on USB_ARCH_HAS_HCD
359	select USB
360	help
361	  Say Y here if you want to use an ATI or Philips USB RF remote control.
362	  These are RF remotes with USB receivers.
363	  ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
364	  and is also available as a separate product.
365	  This driver provides mouse pointer, left and right mouse buttons,
366	  and maps all the other remote buttons to keypress events.
367
368	  To compile this driver as a module, choose M here: the module will be
369	  called ati_remote2.
370
371config INPUT_KEYSPAN_REMOTE
372	tristate "Keyspan DMR USB remote control"
373	depends on USB_ARCH_HAS_HCD
374	select USB
375	help
376	  Say Y here if you want to use a Keyspan DMR USB remote control.
377	  Currently only the UIA-11 type of receiver has been tested.  The tag
378	  on the receiver that connects to the USB port should have a P/N that
379	  will tell you what type of DMR you have.  The UIA-10 type is not
380	  supported at this time.  This driver maps all buttons to keypress
381	  events.
382
383	  To compile this driver as a module, choose M here: the module will
384	  be called keyspan_remote.
385
386config INPUT_KXTJ9
387	tristate "Kionix KXTJ9 tri-axis digital accelerometer"
388	depends on I2C
389	help
390	  Say Y here to enable support for the Kionix KXTJ9 digital tri-axis
391	  accelerometer.
392
393	  To compile this driver as a module, choose M here: the module will
394	  be called kxtj9.
395
396config INPUT_POWERMATE
397	tristate "Griffin PowerMate and Contour Jog support"
398	depends on USB_ARCH_HAS_HCD
399	select USB
400	help
401	  Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
402	  These are aluminum dials which can measure clockwise and anticlockwise
403	  rotation.  The dial also acts as a pushbutton.  The base contains an LED
404	  which can be instructed to pulse or to switch to a particular intensity.
405
406	  You can download userspace tools from
407	  <http://sowerbutts.com/powermate/>.
408
409	  To compile this driver as a module, choose M here: the
410	  module will be called powermate.
411
412config INPUT_YEALINK
413	tristate "Yealink usb-p1k voip phone"
414	depends on USB_ARCH_HAS_HCD
415	select USB
416	help
417	  Say Y here if you want to enable keyboard and LCD functions of the
418	  Yealink usb-p1k usb phones. The audio part is enabled by the generic
419	  usb sound driver, so you might want to enable that as well.
420
421	  For information about how to use these additional functions, see
422	  <file:Documentation/input/devices/yealink.rst>.
423
424	  To compile this driver as a module, choose M here: the module will be
425	  called yealink.
426
427config INPUT_CM109
428	tristate "C-Media CM109 USB I/O Controller"
429	depends on USB_ARCH_HAS_HCD
430	select USB
431	help
432	  Say Y here if you want to enable keyboard and buzzer functions of the
433	  C-Media CM109 usb phones. The audio part is enabled by the generic
434	  usb sound driver, so you might want to enable that as well.
435
436	  To compile this driver as a module, choose M here: the module will be
437	  called cm109.
438
439config INPUT_REGULATOR_HAPTIC
440	tristate "Regulator haptics support"
441	depends on REGULATOR
442	select INPUT_FF_MEMLESS
443	help
444	  This option enables device driver support for the haptic controlled
445	  by a regulator. This driver supports ff-memless interface
446	  from input framework.
447
448	  To compile this driver as a module, choose M here: the
449	  module will be called regulator-haptic.
450
451config INPUT_RETU_PWRBUTTON
452	tristate "Retu Power button Driver"
453	depends on MFD_RETU
454	help
455	  Say Y here if you want to enable power key reporting via the
456	  Retu chips found in Nokia Internet Tablets (770, N800, N810).
457
458	  To compile this driver as a module, choose M here. The module will
459	  be called retu-pwrbutton.
460
461config INPUT_TPS65218_PWRBUTTON
462	tristate "TPS65218 Power button driver"
463	depends on (MFD_TPS65217 || MFD_TPS65218)
464	help
465	  Say Y here if you want to enable power button reporting for
466	  TPS65217 and TPS65218 Power Management IC devices.
467
468	  To compile this driver as a module, choose M here. The module will
469	  be called tps65218-pwrbutton.
470
471config INPUT_AXP20X_PEK
472	tristate "X-Powers AXP20X power button driver"
473	depends on MFD_AXP20X
474	help
475	  Say Y here if you want to enable power key reporting via the
476	  AXP20X PMIC.
477
478	  To compile this driver as a module, choose M here. The module will
479	  be called axp20x-pek.
480
481
482config INPUT_TWL4030_PWRBUTTON
483	tristate "TWL4030 Power button Driver"
484	depends on TWL4030_CORE
485	help
486	  Say Y here if you want to enable power key reporting via the
487	  TWL4030 family of chips.
488
489	  To compile this driver as a module, choose M here. The module will
490	  be called twl4030_pwrbutton.
491
492config INPUT_TWL4030_VIBRA
493	tristate "Support for TWL4030 Vibrator"
494	depends on TWL4030_CORE
495	select MFD_TWL4030_AUDIO
496	select INPUT_FF_MEMLESS
497	help
498	  This option enables support for TWL4030 Vibrator Driver.
499
500	  To compile this driver as a module, choose M here. The module will
501	  be called twl4030_vibra.
502
503config INPUT_TWL6040_VIBRA
504	tristate "Support for TWL6040 Vibrator"
505	depends on TWL6040_CORE
506	select INPUT_FF_MEMLESS
507	help
508	  This option enables support for TWL6040 Vibrator Driver.
509
510	  To compile this driver as a module, choose M here. The module will
511	  be called twl6040_vibra.
512
513config INPUT_UINPUT
514	tristate "User level driver support"
515	help
516	  Say Y here if you want to support user level drivers for input
517	  subsystem accessible under char device 10:223 - /dev/input/uinput.
518
519	  To compile this driver as a module, choose M here: the
520	  module will be called uinput.
521
522config INPUT_SGI_BTNS
523	tristate "SGI Indy/O2 volume button interface"
524	depends on SGI_IP22 || SGI_IP32
525	help
526	  Say Y here if you want to support SGI Indy/O2 volume button interface.
527
528	  To compile this driver as a module, choose M here: the
529	  module will be called sgi_btns.
530
531config HP_SDC_RTC
532	tristate "HP SDC Real Time Clock"
533	depends on (GSC || HP300) && SERIO
534	select HP_SDC
535	help
536	  Say Y here if you want to support the built-in real time clock
537	  of the HP SDC controller.
538
539config INPUT_PALMAS_PWRBUTTON
540	tristate "Palmas Power button Driver"
541	depends on MFD_PALMAS
542	help
543	  Say Y here if you want to enable power key reporting via the
544	  Palmas family of PMICs.
545
546	  To compile this driver as a module, choose M here. The module will
547	  be called palmas_pwrbutton.
548
549config INPUT_PCF50633_PMU
550	tristate "PCF50633 PMU events"
551	depends on MFD_PCF50633
552	help
553	 Say Y to include support for delivering  PMU events via  input
554	 layer on NXP PCF50633.
555
556config INPUT_PCF8574
557	tristate "PCF8574 Keypad input device"
558	depends on I2C
559	help
560	  Say Y here if you want to support a keypad connected via I2C
561	  with a PCF8574.
562
563	  To compile this driver as a module, choose M here: the
564	  module will be called pcf8574_keypad.
565
566config INPUT_PWM_BEEPER
567	tristate "PWM beeper support"
568	depends on PWM
569	help
570	  Say Y here to get support for PWM based beeper devices.
571
572	  If unsure, say N.
573
574	  To compile this driver as a module, choose M here: the module will be
575	  called pwm-beeper.
576
577config INPUT_PWM_VIBRA
578	tristate "PWM vibrator support"
579	depends on PWM
580	select INPUT_FF_MEMLESS
581	help
582	  Say Y here to get support for PWM based vibrator devices.
583
584	  If unsure, say N.
585
586	  To compile this driver as a module, choose M here: the module will be
587	  called pwm-vibra.
588
589config INPUT_RK805_PWRKEY
590	tristate "Rockchip RK805 PMIC power key support"
591	depends on MFD_RK808
592	help
593	  Select this option to enable power key driver for RK805.
594
595	  If unsure, say N.
596
597	  To compile this driver as a module, choose M here: the module will be
598	  called rk805_pwrkey.
599
600config INPUT_GPIO_ROTARY_ENCODER
601	tristate "Rotary encoders connected to GPIO pins"
602	depends on GPIOLIB || COMPILE_TEST
603	help
604	  Say Y here to add support for rotary encoders connected to GPIO lines.
605	  Check file:Documentation/input/devices/rotary-encoder.rst for more
606	  information.
607
608	  To compile this driver as a module, choose M here: the
609	  module will be called rotary_encoder.
610
611config INPUT_RB532_BUTTON
612	tristate "Mikrotik Routerboard 532 button interface"
613	depends on MIKROTIK_RB532
614	depends on GPIOLIB
615	help
616	  Say Y here if you want support for the S1 button built into
617	  Mikrotik's Routerboard 532.
618
619	  To compile this driver as a module, choose M here: the
620	  module will be called rb532_button.
621
622config INPUT_DA7280_HAPTICS
623	tristate "Dialog Semiconductor DA7280 haptics support"
624	depends on INPUT && I2C
625	select REGMAP_I2C
626	help
627	  Say Y to enable support for the Dialog DA7280 haptics driver.
628	  The haptics can be controlled by PWM or GPIO
629	  with I2C communication.
630
631	  To compile this driver as a module, choose M here: the
632	  module will be called da7280.
633
634config INPUT_DA9052_ONKEY
635	tristate "Dialog DA9052/DA9053 Onkey"
636	depends on PMIC_DA9052
637	help
638	  Support the ONKEY of Dialog DA9052 PMICs as an input device
639	  reporting power button status.
640
641	  To compile this driver as a module, choose M here: the
642	  module will be called da9052_onkey.
643
644config INPUT_DA9055_ONKEY
645	tristate "Dialog Semiconductor DA9055 ONKEY"
646	depends on MFD_DA9055
647	help
648	  Support the ONKEY of DA9055 PMICs as an input device
649	  reporting power button status.
650
651	  To compile this driver as a module, choose M here: the module
652	  will be called da9055_onkey.
653
654config INPUT_DA9063_ONKEY
655	tristate "Dialog DA9063/62/61 OnKey"
656	depends on MFD_DA9063 || MFD_DA9062
657	help
658	  Support the ONKEY of Dialog DA9063, DA9062 and DA9061 Power
659	  Management ICs as an input device capable of reporting the
660	  power button status.
661
662	  To compile this driver as a module, choose M here: the module
663	  will be called da9063_onkey.
664
665config INPUT_DM355EVM
666	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
667	depends on MFD_DM355EVM_MSP
668	select INPUT_SPARSEKMAP
669	help
670	  Supports the pushbuttons and IR remote used with
671	  the DM355 EVM board.
672
673	  To compile this driver as a module, choose M here: the
674	  module will be called dm355evm_keys.
675
676config INPUT_WM831X_ON
677	tristate "WM831X ON pin"
678	depends on MFD_WM831X
679	help
680	  Support the ON pin of WM831X PMICs as an input device
681	  reporting power button status.
682
683	  To compile this driver as a module, choose M here: the module
684	  will be called wm831x_on.
685
686config INPUT_PCAP
687	tristate "Motorola EZX PCAP misc input events"
688	depends on EZX_PCAP
689	help
690	  Say Y here if you want to use Power key and Headphone button
691	  on Motorola EZX phones.
692
693	  To compile this driver as a module, choose M here: the
694	  module will be called pcap_keys.
695
696config INPUT_ADXL34X
697	tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"
698	default n
699	help
700	  Say Y here if you have a Accelerometer interface using the
701	  ADXL345/6 controller, and your board-specific initialization
702	  code includes that in its table of devices.
703
704	  This driver can use either I2C or SPI communication to the
705	  ADXL345/6 controller.  Select the appropriate method for
706	  your system.
707
708	  If unsure, say N (but it's safe to say "Y").
709
710	  To compile this driver as a module, choose M here: the
711	  module will be called adxl34x.
712
713config INPUT_ADXL34X_I2C
714	tristate "support I2C bus connection"
715	depends on INPUT_ADXL34X && I2C
716	default y
717	help
718	  Say Y here if you have ADXL345/6 hooked to an I2C bus.
719
720	  To compile this driver as a module, choose M here: the
721	  module will be called adxl34x-i2c.
722
723config INPUT_ADXL34X_SPI
724	tristate "support SPI bus connection"
725	depends on INPUT_ADXL34X && SPI
726	default y
727	help
728	  Say Y here if you have ADXL345/6 hooked to a SPI bus.
729
730	  To compile this driver as a module, choose M here: the
731	  module will be called adxl34x-spi.
732
733config INPUT_IMS_PCU
734	tristate "IMS Passenger Control Unit driver"
735	depends on USB
736	depends on LEDS_CLASS
737	help
738	  Say Y here if you have system with IMS Rave Passenger Control Unit.
739
740	  To compile this driver as a module, choose M here: the module will be
741	  called ims_pcu.
742
743config INPUT_IQS269A
744	tristate "Azoteq IQS269A capacitive touch controller"
745	depends on I2C
746	select REGMAP_I2C
747	help
748	  Say Y to enable support for the Azoteq IQS269A capacitive
749	  touch controller.
750
751	  To compile this driver as a module, choose M here: the
752	  module will be called iqs269a.
753
754config INPUT_IQS626A
755	tristate "Azoteq IQS626A capacitive touch controller"
756	depends on I2C
757	select REGMAP_I2C
758	help
759	  Say Y to enable support for the Azoteq IQS626A capacitive
760	  touch controller.
761
762	  To compile this driver as a module, choose M here: the
763	  module will be called iqs626a.
764
765config INPUT_IQS7222
766	tristate "Azoteq IQS7222A/B/C capacitive touch controller"
767	depends on I2C
768	help
769	  Say Y to enable support for the Azoteq IQS7222A/B/C family
770	  of capacitive touch controllers.
771
772	  To compile this driver as a module, choose M here: the
773	  module will be called iqs7222.
774
775config INPUT_CMA3000
776	tristate "VTI CMA3000 Tri-axis accelerometer"
777	help
778	  Say Y here if you want to use VTI CMA3000_D0x Accelerometer
779	  driver
780
781	  This driver currently only supports I2C interface to the
782	  controller. Also select the I2C method.
783
784	  If unsure, say N
785
786	  To compile this driver as a module, choose M here: the
787	  module will be called cma3000_d0x.
788
789config INPUT_CMA3000_I2C
790	tristate "Support I2C bus connection"
791	depends on INPUT_CMA3000 && I2C
792	help
793	  Say Y here if you want to use VTI CMA3000_D0x Accelerometer
794	  through I2C interface.
795
796	  To compile this driver as a module, choose M here: the
797	  module will be called cma3000_d0x_i2c.
798
799config INPUT_XEN_KBDDEV_FRONTEND
800	tristate "Xen virtual keyboard and mouse support"
801	depends on XEN
802	default y
803	select XEN_XENBUS_FRONTEND
804	help
805	  This driver implements the front-end of the Xen virtual
806	  keyboard and mouse device driver.  It communicates with a back-end
807	  in another domain.
808
809	  To compile this driver as a module, choose M here: the
810	  module will be called xen-kbdfront.
811
812config INPUT_IDEAPAD_SLIDEBAR
813	tristate "IdeaPad Laptop Slidebar"
814	depends on INPUT
815	depends on SERIO_I8042
816	help
817	  Say Y here if you have an IdeaPad laptop with a slidebar.
818
819	  To compile this driver as a module, choose M here: the
820	  module will be called ideapad_slidebar.
821
822config INPUT_SOC_BUTTON_ARRAY
823	tristate "Windows-compatible SoC Button Array"
824	depends on KEYBOARD_GPIO && ACPI
825	help
826	  Say Y here if you have a SoC-based tablet that originally runs
827	  Windows 8 or a Microsoft Surface Book 2, Pro 5, Laptop 1 or later.
828
829	  To compile this driver as a module, choose M here: the
830	  module will be called soc_button_array.
831
832config INPUT_DRV260X_HAPTICS
833	tristate "TI DRV260X haptics support"
834	depends on INPUT && I2C
835	depends on GPIOLIB || COMPILE_TEST
836	select INPUT_FF_MEMLESS
837	select REGMAP_I2C
838	help
839	  Say Y to enable support for the TI DRV260X haptics driver.
840
841	  To compile this driver as a module, choose M here: the
842	  module will be called drv260x-haptics.
843
844config INPUT_DRV2665_HAPTICS
845	tristate "TI DRV2665 haptics support"
846	depends on INPUT && I2C
847	select INPUT_FF_MEMLESS
848	select REGMAP_I2C
849	help
850	  Say Y to enable support for the TI DRV2665 haptics driver.
851
852	  To compile this driver as a module, choose M here: the
853	  module will be called drv2665-haptics.
854
855config INPUT_DRV2667_HAPTICS
856	tristate "TI DRV2667 haptics support"
857	depends on INPUT && I2C
858	select INPUT_FF_MEMLESS
859	select REGMAP_I2C
860	help
861	  Say Y to enable support for the TI DRV2667 haptics driver.
862
863	  To compile this driver as a module, choose M here: the
864	  module will be called drv2667-haptics.
865
866config INPUT_HISI_POWERKEY
867	tristate "Hisilicon PMIC ONKEY support"
868	depends on ARCH_HISI || COMPILE_TEST
869	help
870	  Say Y to enable support for PMIC ONKEY.
871
872	  To compile this driver as a module, choose M here: the
873	  module will be called hisi_powerkey.
874
875config INPUT_RAVE_SP_PWRBUTTON
876	tristate "RAVE SP Power button Driver"
877	depends on RAVE_SP_CORE
878	help
879	  Say Y here if you want to enable power key reporting from RAVE SP
880
881	  To compile this driver as a module, choose M here: the
882	  module will be called rave-sp-pwrbutton.
883
884config INPUT_SC27XX_VIBRA
885	tristate "Spreadtrum sc27xx vibrator support"
886	depends on MFD_SC27XX_PMIC || COMPILE_TEST
887	select INPUT_FF_MEMLESS
888	help
889	  This option enables support for Spreadtrum sc27xx vibrator driver.
890
891	  To compile this driver as a module, choose M here. The module will
892	  be called sc27xx_vibra.
893
894config INPUT_STPMIC1_ONKEY
895	tristate "STPMIC1 PMIC Onkey support"
896	depends on MFD_STPMIC1
897	help
898	  Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
899	  can be used to wakeup from low power modes and force a shut-down on
900	  long press.
901
902	  To compile this driver as a module, choose M here: the
903	  module will be called stpmic1_onkey.
904
905endif
906