1 /*
2  * Copyright (C) 2008-2009 Texas Instruments Inc
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License as published by
6  * the Free Software Foundation; either version 2 of the License, or
7  * (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software
16  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
17  *
18  * Driver name : VPFE Capture driver
19  *    VPFE Capture driver allows applications to capture and stream video
20  *    frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as
21  *    TVP5146 or  Raw Bayer RGB image data from an image sensor
22  *    such as Microns' MT9T001, MT9T031 etc.
23  *
24  *    These SoCs have, in common, a Video Processing Subsystem (VPSS) that
25  *    consists of a Video Processing Front End (VPFE) for capturing
26  *    video/raw image data and Video Processing Back End (VPBE) for displaying
27  *    YUV data through an in-built analog encoder or Digital LCD port. This
28  *    driver is for capture through VPFE. A typical EVM using these SoCs have
29  *    following high level configuration.
30  *
31  *
32  *    decoder(TVP5146/		YUV/
33  * 	     MT9T001)   -->  Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
34  *    				data input              |      |
35  *							V      |
36  *						      SDRAM    |
37  *							       V
38  *							   Image Processor
39  *							       |
40  *							       V
41  *							     SDRAM
42  *    The data flow happens from a decoder connected to the VPFE over a
43  *    YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface
44  *    and to the input of VPFE through an optional MUX (if more inputs are
45  *    to be interfaced on the EVM). The input data is first passed through
46  *    CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC
47  *    does very little or no processing on YUV data and does pre-process Raw
48  *    Bayer RGB data through modules such as Defect Pixel Correction (DFC)
49  *    Color Space Conversion (CSC), data gain/offset etc. After this, data
50  *    can be written to SDRAM or can be connected to the image processing
51  *    block such as IPIPE (on DM355 only).
52  *
53  *    Features supported
54  *  		- MMAP IO
55  *		- Capture using TVP5146 over BT.656
56  *		- support for interfacing decoders using sub device model
57  *		- Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV
58  *		  data capture to SDRAM.
59  *    TODO list
60  *		- Support multiple REQBUF after open
61  *		- Support for de-allocating buffers through REQBUF
62  *		- Support for Raw Bayer RGB capture
63  *		- Support for chaining Image Processor
64  *		- Support for static allocation of buffers
65  *		- Support for USERPTR IO
66  *		- Support for STREAMON before QBUF
67  *		- Support for control ioctls
68  */
69 #include <linux/module.h>
70 #include <linux/slab.h>
71 #include <linux/init.h>
72 #include <linux/platform_device.h>
73 #include <linux/interrupt.h>
74 #include <media/v4l2-common.h>
75 #include <linux/io.h>
76 #include <media/davinci/vpfe_capture.h>
77 #include "ccdc_hw_device.h"
78 
79 static int debug;
80 static u32 numbuffers = 3;
81 static u32 bufsize = (720 * 576 * 2);
82 
83 module_param(numbuffers, uint, S_IRUGO);
84 module_param(bufsize, uint, S_IRUGO);
85 module_param(debug, int, 0644);
86 
87 MODULE_PARM_DESC(numbuffers, "buffer count (default:3)");
88 MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)");
89 MODULE_PARM_DESC(debug, "Debug level 0-1");
90 
91 MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver");
92 MODULE_LICENSE("GPL");
93 MODULE_AUTHOR("Texas Instruments");
94 
95 /* standard information */
96 struct vpfe_standard {
97 	v4l2_std_id std_id;
98 	unsigned int width;
99 	unsigned int height;
100 	struct v4l2_fract pixelaspect;
101 	/* 0 - progressive, 1 - interlaced */
102 	int frame_format;
103 };
104 
105 /* ccdc configuration */
106 struct ccdc_config {
107 	/* This make sure vpfe is probed and ready to go */
108 	int vpfe_probed;
109 	/* name of ccdc device */
110 	char name[32];
111 };
112 
113 /* data structures */
114 static struct vpfe_config_params config_params = {
115 	.min_numbuffers = 3,
116 	.numbuffers = 3,
117 	.min_bufsize = 720 * 480 * 2,
118 	.device_bufsize = 720 * 576 * 2,
119 };
120 
121 /* ccdc device registered */
122 static struct ccdc_hw_device *ccdc_dev;
123 /* lock for accessing ccdc information */
124 static DEFINE_MUTEX(ccdc_lock);
125 /* ccdc configuration */
126 static struct ccdc_config *ccdc_cfg;
127 
128 const struct vpfe_standard vpfe_standards[] = {
129 	{V4L2_STD_525_60, 720, 480, {11, 10}, 1},
130 	{V4L2_STD_625_50, 720, 576, {54, 59}, 1},
131 };
132 
133 /* Used when raw Bayer image from ccdc is directly captured to SDRAM */
134 static const struct vpfe_pixel_format vpfe_pix_fmts[] = {
135 	{
136 		.fmtdesc = {
137 			.index = 0,
138 			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
139 			.description = "Bayer GrRBGb 8bit A-Law compr.",
140 			.pixelformat = V4L2_PIX_FMT_SBGGR8,
141 		},
142 		.bpp = 1,
143 	},
144 	{
145 		.fmtdesc = {
146 			.index = 1,
147 			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
148 			.description = "Bayer GrRBGb - 16bit",
149 			.pixelformat = V4L2_PIX_FMT_SBGGR16,
150 		},
151 		.bpp = 2,
152 	},
153 	{
154 		.fmtdesc = {
155 			.index = 2,
156 			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
157 			.description = "Bayer GrRBGb 8bit DPCM compr.",
158 			.pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
159 		},
160 		.bpp = 1,
161 	},
162 	{
163 		.fmtdesc = {
164 			.index = 3,
165 			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
166 			.description = "YCbCr 4:2:2 Interleaved UYVY",
167 			.pixelformat = V4L2_PIX_FMT_UYVY,
168 		},
169 		.bpp = 2,
170 	},
171 	{
172 		.fmtdesc = {
173 			.index = 4,
174 			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
175 			.description = "YCbCr 4:2:2 Interleaved YUYV",
176 			.pixelformat = V4L2_PIX_FMT_YUYV,
177 		},
178 		.bpp = 2,
179 	},
180 	{
181 		.fmtdesc = {
182 			.index = 5,
183 			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
184 			.description = "Y/CbCr 4:2:0 - Semi planar",
185 			.pixelformat = V4L2_PIX_FMT_NV12,
186 		},
187 		.bpp = 1,
188 	},
189 };
190 
191 /*
192  * vpfe_lookup_pix_format()
193  * lookup an entry in the vpfe pix format table based on pix_format
194  */
vpfe_lookup_pix_format(u32 pix_format)195 static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format)
196 {
197 	int i;
198 
199 	for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) {
200 		if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat)
201 			return &vpfe_pix_fmts[i];
202 	}
203 	return NULL;
204 }
205 
206 /*
207  * vpfe_register_ccdc_device. CCDC module calls this to
208  * register with vpfe capture
209  */
vpfe_register_ccdc_device(struct ccdc_hw_device * dev)210 int vpfe_register_ccdc_device(struct ccdc_hw_device *dev)
211 {
212 	int ret = 0;
213 	printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name);
214 
215 	BUG_ON(!dev->hw_ops.open);
216 	BUG_ON(!dev->hw_ops.enable);
217 	BUG_ON(!dev->hw_ops.set_hw_if_params);
218 	BUG_ON(!dev->hw_ops.configure);
219 	BUG_ON(!dev->hw_ops.set_buftype);
220 	BUG_ON(!dev->hw_ops.get_buftype);
221 	BUG_ON(!dev->hw_ops.enum_pix);
222 	BUG_ON(!dev->hw_ops.set_frame_format);
223 	BUG_ON(!dev->hw_ops.get_frame_format);
224 	BUG_ON(!dev->hw_ops.get_pixel_format);
225 	BUG_ON(!dev->hw_ops.set_pixel_format);
226 	BUG_ON(!dev->hw_ops.set_image_window);
227 	BUG_ON(!dev->hw_ops.get_image_window);
228 	BUG_ON(!dev->hw_ops.get_line_length);
229 	BUG_ON(!dev->hw_ops.getfid);
230 
231 	mutex_lock(&ccdc_lock);
232 	if (NULL == ccdc_cfg) {
233 		/*
234 		 * TODO. Will this ever happen? if so, we need to fix it.
235 		 * Proabably we need to add the request to a linked list and
236 		 * walk through it during vpfe probe
237 		 */
238 		printk(KERN_ERR "vpfe capture not initialized\n");
239 		ret = -EFAULT;
240 		goto unlock;
241 	}
242 
243 	if (strcmp(dev->name, ccdc_cfg->name)) {
244 		/* ignore this ccdc */
245 		ret = -EINVAL;
246 		goto unlock;
247 	}
248 
249 	if (ccdc_dev) {
250 		printk(KERN_ERR "ccdc already registered\n");
251 		ret = -EINVAL;
252 		goto unlock;
253 	}
254 
255 	ccdc_dev = dev;
256 unlock:
257 	mutex_unlock(&ccdc_lock);
258 	return ret;
259 }
260 EXPORT_SYMBOL(vpfe_register_ccdc_device);
261 
262 /*
263  * vpfe_unregister_ccdc_device. CCDC module calls this to
264  * unregister with vpfe capture
265  */
vpfe_unregister_ccdc_device(struct ccdc_hw_device * dev)266 void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev)
267 {
268 	if (NULL == dev) {
269 		printk(KERN_ERR "invalid ccdc device ptr\n");
270 		return;
271 	}
272 
273 	printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n",
274 		dev->name);
275 
276 	if (strcmp(dev->name, ccdc_cfg->name)) {
277 		/* ignore this ccdc */
278 		return;
279 	}
280 
281 	mutex_lock(&ccdc_lock);
282 	ccdc_dev = NULL;
283 	mutex_unlock(&ccdc_lock);
284 	return;
285 }
286 EXPORT_SYMBOL(vpfe_unregister_ccdc_device);
287 
288 /*
289  * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings
290  */
vpfe_get_ccdc_image_format(struct vpfe_device * vpfe_dev,struct v4l2_format * f)291 static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev,
292 				 struct v4l2_format *f)
293 {
294 	struct v4l2_rect image_win;
295 	enum ccdc_buftype buf_type;
296 	enum ccdc_frmfmt frm_fmt;
297 
298 	memset(f, 0, sizeof(*f));
299 	f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
300 	ccdc_dev->hw_ops.get_image_window(&image_win);
301 	f->fmt.pix.width = image_win.width;
302 	f->fmt.pix.height = image_win.height;
303 	f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length();
304 	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
305 				f->fmt.pix.height;
306 	buf_type = ccdc_dev->hw_ops.get_buftype();
307 	f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format();
308 	frm_fmt = ccdc_dev->hw_ops.get_frame_format();
309 	if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
310 		f->fmt.pix.field = V4L2_FIELD_NONE;
311 	else if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
312 		if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
313 			f->fmt.pix.field = V4L2_FIELD_INTERLACED;
314 		else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED)
315 			f->fmt.pix.field = V4L2_FIELD_SEQ_TB;
316 		else {
317 			v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n");
318 			return -EINVAL;
319 		}
320 	} else {
321 		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n");
322 		return -EINVAL;
323 	}
324 	return 0;
325 }
326 
327 /*
328  * vpfe_config_ccdc_image_format()
329  * For a pix format, configure ccdc to setup the capture
330  */
vpfe_config_ccdc_image_format(struct vpfe_device * vpfe_dev)331 static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev)
332 {
333 	enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
334 	int ret = 0;
335 
336 	if (ccdc_dev->hw_ops.set_pixel_format(
337 			vpfe_dev->fmt.fmt.pix.pixelformat) < 0) {
338 		v4l2_err(&vpfe_dev->v4l2_dev,
339 			"couldn't set pix format in ccdc\n");
340 		return -EINVAL;
341 	}
342 	/* configure the image window */
343 	ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop);
344 
345 	switch (vpfe_dev->fmt.fmt.pix.field) {
346 	case V4L2_FIELD_INTERLACED:
347 		/* do nothing, since it is default */
348 		ret = ccdc_dev->hw_ops.set_buftype(
349 				CCDC_BUFTYPE_FLD_INTERLEAVED);
350 		break;
351 	case V4L2_FIELD_NONE:
352 		frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
353 		/* buffer type only applicable for interlaced scan */
354 		break;
355 	case V4L2_FIELD_SEQ_TB:
356 		ret = ccdc_dev->hw_ops.set_buftype(
357 				CCDC_BUFTYPE_FLD_SEPARATED);
358 		break;
359 	default:
360 		return -EINVAL;
361 	}
362 
363 	/* set the frame format */
364 	if (!ret)
365 		ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt);
366 	return ret;
367 }
368 /*
369  * vpfe_config_image_format()
370  * For a given standard, this functions sets up the default
371  * pix format & crop values in the vpfe device and ccdc.  It first
372  * starts with defaults based values from the standard table.
373  * It then checks if sub device support g_mbus_fmt and then override the
374  * values based on that.Sets crop values to match with scan resolution
375  * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
376  * values in ccdc
377  */
vpfe_config_image_format(struct vpfe_device * vpfe_dev,const v4l2_std_id * std_id)378 static int vpfe_config_image_format(struct vpfe_device *vpfe_dev,
379 				    const v4l2_std_id *std_id)
380 {
381 	struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev;
382 	struct v4l2_mbus_framefmt mbus_fmt;
383 	struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix;
384 	int i, ret = 0;
385 
386 	for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
387 		if (vpfe_standards[i].std_id & *std_id) {
388 			vpfe_dev->std_info.active_pixels =
389 					vpfe_standards[i].width;
390 			vpfe_dev->std_info.active_lines =
391 					vpfe_standards[i].height;
392 			vpfe_dev->std_info.frame_format =
393 					vpfe_standards[i].frame_format;
394 			vpfe_dev->std_index = i;
395 			break;
396 		}
397 	}
398 
399 	if (i ==  ARRAY_SIZE(vpfe_standards)) {
400 		v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n");
401 		return -EINVAL;
402 	}
403 
404 	vpfe_dev->crop.top = 0;
405 	vpfe_dev->crop.left = 0;
406 	vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels;
407 	vpfe_dev->crop.height = vpfe_dev->std_info.active_lines;
408 	pix->width = vpfe_dev->crop.width;
409 	pix->height = vpfe_dev->crop.height;
410 
411 	/* first field and frame format based on standard frame format */
412 	if (vpfe_dev->std_info.frame_format) {
413 		pix->field = V4L2_FIELD_INTERLACED;
414 		/* assume V4L2_PIX_FMT_UYVY as default */
415 		pix->pixelformat = V4L2_PIX_FMT_UYVY;
416 		v4l2_fill_mbus_format(&mbus_fmt, pix,
417 				V4L2_MBUS_FMT_YUYV10_2X10);
418 	} else {
419 		pix->field = V4L2_FIELD_NONE;
420 		/* assume V4L2_PIX_FMT_SBGGR8 */
421 		pix->pixelformat = V4L2_PIX_FMT_SBGGR8;
422 		v4l2_fill_mbus_format(&mbus_fmt, pix,
423 				V4L2_MBUS_FMT_SBGGR8_1X8);
424 	}
425 
426 	/* if sub device supports g_mbus_fmt, override the defaults */
427 	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
428 			sdinfo->grp_id, video, g_mbus_fmt, &mbus_fmt);
429 
430 	if (ret && ret != -ENOIOCTLCMD) {
431 		v4l2_err(&vpfe_dev->v4l2_dev,
432 			"error in getting g_mbus_fmt from sub device\n");
433 		return ret;
434 	}
435 	v4l2_fill_pix_format(pix, &mbus_fmt);
436 	pix->bytesperline = pix->width * 2;
437 	pix->sizeimage = pix->bytesperline * pix->height;
438 
439 	/* Sets the values in CCDC */
440 	ret = vpfe_config_ccdc_image_format(vpfe_dev);
441 	if (ret)
442 		return ret;
443 
444 	/* Update the values of sizeimage and bytesperline */
445 	if (!ret) {
446 		pix->bytesperline = ccdc_dev->hw_ops.get_line_length();
447 		pix->sizeimage = pix->bytesperline * pix->height;
448 	}
449 	return ret;
450 }
451 
vpfe_initialize_device(struct vpfe_device * vpfe_dev)452 static int vpfe_initialize_device(struct vpfe_device *vpfe_dev)
453 {
454 	int ret = 0;
455 
456 	/* set first input of current subdevice as the current input */
457 	vpfe_dev->current_input = 0;
458 
459 	/* set default standard */
460 	vpfe_dev->std_index = 0;
461 
462 	/* Configure the default format information */
463 	ret = vpfe_config_image_format(vpfe_dev,
464 				&vpfe_standards[vpfe_dev->std_index].std_id);
465 	if (ret)
466 		return ret;
467 
468 	/* now open the ccdc device to initialize it */
469 	mutex_lock(&ccdc_lock);
470 	if (NULL == ccdc_dev) {
471 		v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n");
472 		ret = -ENODEV;
473 		goto unlock;
474 	}
475 
476 	if (!try_module_get(ccdc_dev->owner)) {
477 		v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n");
478 		ret = -ENODEV;
479 		goto unlock;
480 	}
481 	ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev);
482 	if (!ret)
483 		vpfe_dev->initialized = 1;
484 
485 	/* Clear all VPFE/CCDC interrupts */
486 	if (vpfe_dev->cfg->clr_intr)
487 		vpfe_dev->cfg->clr_intr(-1);
488 
489 unlock:
490 	mutex_unlock(&ccdc_lock);
491 	return ret;
492 }
493 
494 /*
495  * vpfe_open : It creates object of file handle structure and
496  * stores it in private_data  member of filepointer
497  */
vpfe_open(struct file * file)498 static int vpfe_open(struct file *file)
499 {
500 	struct vpfe_device *vpfe_dev = video_drvdata(file);
501 	struct vpfe_fh *fh;
502 
503 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n");
504 
505 	if (!vpfe_dev->cfg->num_subdevs) {
506 		v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n");
507 		return -ENODEV;
508 	}
509 
510 	/* Allocate memory for the file handle object */
511 	fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL);
512 	if (NULL == fh) {
513 		v4l2_err(&vpfe_dev->v4l2_dev,
514 			"unable to allocate memory for file handle object\n");
515 		return -ENOMEM;
516 	}
517 	/* store pointer to fh in private_data member of file */
518 	file->private_data = fh;
519 	fh->vpfe_dev = vpfe_dev;
520 	mutex_lock(&vpfe_dev->lock);
521 	/* If decoder is not initialized. initialize it */
522 	if (!vpfe_dev->initialized) {
523 		if (vpfe_initialize_device(vpfe_dev)) {
524 			mutex_unlock(&vpfe_dev->lock);
525 			return -ENODEV;
526 		}
527 	}
528 	/* Increment device usrs counter */
529 	vpfe_dev->usrs++;
530 	/* Set io_allowed member to false */
531 	fh->io_allowed = 0;
532 	/* Initialize priority of this instance to default priority */
533 	fh->prio = V4L2_PRIORITY_UNSET;
534 	v4l2_prio_open(&vpfe_dev->prio, &fh->prio);
535 	mutex_unlock(&vpfe_dev->lock);
536 	return 0;
537 }
538 
vpfe_schedule_next_buffer(struct vpfe_device * vpfe_dev)539 static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev)
540 {
541 	unsigned long addr;
542 
543 	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
544 					struct videobuf_buffer, queue);
545 	list_del(&vpfe_dev->next_frm->queue);
546 	vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE;
547 	addr = videobuf_to_dma_contig(vpfe_dev->next_frm);
548 
549 	ccdc_dev->hw_ops.setfbaddr(addr);
550 }
551 
vpfe_schedule_bottom_field(struct vpfe_device * vpfe_dev)552 static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev)
553 {
554 	unsigned long addr;
555 
556 	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
557 	addr += vpfe_dev->field_off;
558 	ccdc_dev->hw_ops.setfbaddr(addr);
559 }
560 
vpfe_process_buffer_complete(struct vpfe_device * vpfe_dev)561 static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev)
562 {
563 	struct timeval timevalue;
564 
565 	do_gettimeofday(&timevalue);
566 	vpfe_dev->cur_frm->ts = timevalue;
567 	vpfe_dev->cur_frm->state = VIDEOBUF_DONE;
568 	vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage;
569 	wake_up_interruptible(&vpfe_dev->cur_frm->done);
570 	vpfe_dev->cur_frm = vpfe_dev->next_frm;
571 }
572 
573 /* ISR for VINT0*/
vpfe_isr(int irq,void * dev_id)574 static irqreturn_t vpfe_isr(int irq, void *dev_id)
575 {
576 	struct vpfe_device *vpfe_dev = dev_id;
577 	enum v4l2_field field;
578 	int fid;
579 
580 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n");
581 	field = vpfe_dev->fmt.fmt.pix.field;
582 
583 	/* if streaming not started, don't do anything */
584 	if (!vpfe_dev->started)
585 		goto clear_intr;
586 
587 	/* only for 6446 this will be applicable */
588 	if (NULL != ccdc_dev->hw_ops.reset)
589 		ccdc_dev->hw_ops.reset();
590 
591 	if (field == V4L2_FIELD_NONE) {
592 		/* handle progressive frame capture */
593 		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
594 			"frame format is progressive...\n");
595 		if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
596 			vpfe_process_buffer_complete(vpfe_dev);
597 		goto clear_intr;
598 	}
599 
600 	/* interlaced or TB capture check which field we are in hardware */
601 	fid = ccdc_dev->hw_ops.getfid();
602 
603 	/* switch the software maintained field id */
604 	vpfe_dev->field_id ^= 1;
605 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n",
606 		fid, vpfe_dev->field_id);
607 	if (fid == vpfe_dev->field_id) {
608 		/* we are in-sync here,continue */
609 		if (fid == 0) {
610 			/*
611 			 * One frame is just being captured. If the next frame
612 			 * is available, release the current frame and move on
613 			 */
614 			if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
615 				vpfe_process_buffer_complete(vpfe_dev);
616 			/*
617 			 * based on whether the two fields are stored
618 			 * interleavely or separately in memory, reconfigure
619 			 * the CCDC memory address
620 			 */
621 			if (field == V4L2_FIELD_SEQ_TB) {
622 				vpfe_schedule_bottom_field(vpfe_dev);
623 			}
624 			goto clear_intr;
625 		}
626 		/*
627 		 * if one field is just being captured configure
628 		 * the next frame get the next frame from the empty
629 		 * queue if no frame is available hold on to the
630 		 * current buffer
631 		 */
632 		spin_lock(&vpfe_dev->dma_queue_lock);
633 		if (!list_empty(&vpfe_dev->dma_queue) &&
634 		    vpfe_dev->cur_frm == vpfe_dev->next_frm)
635 			vpfe_schedule_next_buffer(vpfe_dev);
636 		spin_unlock(&vpfe_dev->dma_queue_lock);
637 	} else if (fid == 0) {
638 		/*
639 		 * out of sync. Recover from any hardware out-of-sync.
640 		 * May loose one frame
641 		 */
642 		vpfe_dev->field_id = fid;
643 	}
644 clear_intr:
645 	if (vpfe_dev->cfg->clr_intr)
646 		vpfe_dev->cfg->clr_intr(irq);
647 
648 	return IRQ_HANDLED;
649 }
650 
651 /* vdint1_isr - isr handler for VINT1 interrupt */
vdint1_isr(int irq,void * dev_id)652 static irqreturn_t vdint1_isr(int irq, void *dev_id)
653 {
654 	struct vpfe_device *vpfe_dev = dev_id;
655 
656 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n");
657 
658 	/* if streaming not started, don't do anything */
659 	if (!vpfe_dev->started) {
660 		if (vpfe_dev->cfg->clr_intr)
661 			vpfe_dev->cfg->clr_intr(irq);
662 		return IRQ_HANDLED;
663 	}
664 
665 	spin_lock(&vpfe_dev->dma_queue_lock);
666 	if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) &&
667 	    !list_empty(&vpfe_dev->dma_queue) &&
668 	    vpfe_dev->cur_frm == vpfe_dev->next_frm)
669 		vpfe_schedule_next_buffer(vpfe_dev);
670 	spin_unlock(&vpfe_dev->dma_queue_lock);
671 
672 	if (vpfe_dev->cfg->clr_intr)
673 		vpfe_dev->cfg->clr_intr(irq);
674 
675 	return IRQ_HANDLED;
676 }
677 
vpfe_detach_irq(struct vpfe_device * vpfe_dev)678 static void vpfe_detach_irq(struct vpfe_device *vpfe_dev)
679 {
680 	enum ccdc_frmfmt frame_format;
681 
682 	frame_format = ccdc_dev->hw_ops.get_frame_format();
683 	if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
684 		free_irq(vpfe_dev->ccdc_irq1, vpfe_dev);
685 }
686 
vpfe_attach_irq(struct vpfe_device * vpfe_dev)687 static int vpfe_attach_irq(struct vpfe_device *vpfe_dev)
688 {
689 	enum ccdc_frmfmt frame_format;
690 
691 	frame_format = ccdc_dev->hw_ops.get_frame_format();
692 	if (frame_format == CCDC_FRMFMT_PROGRESSIVE) {
693 		return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr,
694 				    IRQF_DISABLED, "vpfe_capture1",
695 				    vpfe_dev);
696 	}
697 	return 0;
698 }
699 
700 /* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */
vpfe_stop_ccdc_capture(struct vpfe_device * vpfe_dev)701 static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev)
702 {
703 	vpfe_dev->started = 0;
704 	ccdc_dev->hw_ops.enable(0);
705 	if (ccdc_dev->hw_ops.enable_out_to_sdram)
706 		ccdc_dev->hw_ops.enable_out_to_sdram(0);
707 }
708 
709 /*
710  * vpfe_release : This function deletes buffer queue, frees the
711  * buffers and the vpfe file  handle
712  */
vpfe_release(struct file * file)713 static int vpfe_release(struct file *file)
714 {
715 	struct vpfe_device *vpfe_dev = video_drvdata(file);
716 	struct vpfe_fh *fh = file->private_data;
717 	struct vpfe_subdev_info *sdinfo;
718 	int ret;
719 
720 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n");
721 
722 	/* Get the device lock */
723 	mutex_lock(&vpfe_dev->lock);
724 	/* if this instance is doing IO */
725 	if (fh->io_allowed) {
726 		if (vpfe_dev->started) {
727 			sdinfo = vpfe_dev->current_subdev;
728 			ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
729 							 sdinfo->grp_id,
730 							 video, s_stream, 0);
731 			if (ret && (ret != -ENOIOCTLCMD))
732 				v4l2_err(&vpfe_dev->v4l2_dev,
733 				"stream off failed in subdev\n");
734 			vpfe_stop_ccdc_capture(vpfe_dev);
735 			vpfe_detach_irq(vpfe_dev);
736 			videobuf_streamoff(&vpfe_dev->buffer_queue);
737 		}
738 		vpfe_dev->io_usrs = 0;
739 		vpfe_dev->numbuffers = config_params.numbuffers;
740 	}
741 
742 	/* Decrement device usrs counter */
743 	vpfe_dev->usrs--;
744 	/* Close the priority */
745 	v4l2_prio_close(&vpfe_dev->prio, fh->prio);
746 	/* If this is the last file handle */
747 	if (!vpfe_dev->usrs) {
748 		vpfe_dev->initialized = 0;
749 		if (ccdc_dev->hw_ops.close)
750 			ccdc_dev->hw_ops.close(vpfe_dev->pdev);
751 		module_put(ccdc_dev->owner);
752 	}
753 	mutex_unlock(&vpfe_dev->lock);
754 	file->private_data = NULL;
755 	/* Free memory allocated to file handle object */
756 	kfree(fh);
757 	return 0;
758 }
759 
760 /*
761  * vpfe_mmap : It is used to map kernel space buffers
762  * into user spaces
763  */
vpfe_mmap(struct file * file,struct vm_area_struct * vma)764 static int vpfe_mmap(struct file *file, struct vm_area_struct *vma)
765 {
766 	/* Get the device object and file handle object */
767 	struct vpfe_device *vpfe_dev = video_drvdata(file);
768 
769 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n");
770 
771 	return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma);
772 }
773 
774 /*
775  * vpfe_poll: It is used for select/poll system call
776  */
vpfe_poll(struct file * file,poll_table * wait)777 static unsigned int vpfe_poll(struct file *file, poll_table *wait)
778 {
779 	struct vpfe_device *vpfe_dev = video_drvdata(file);
780 
781 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n");
782 
783 	if (vpfe_dev->started)
784 		return videobuf_poll_stream(file,
785 					    &vpfe_dev->buffer_queue, wait);
786 	return 0;
787 }
788 
789 /* vpfe capture driver file operations */
790 static const struct v4l2_file_operations vpfe_fops = {
791 	.owner = THIS_MODULE,
792 	.open = vpfe_open,
793 	.release = vpfe_release,
794 	.unlocked_ioctl = video_ioctl2,
795 	.mmap = vpfe_mmap,
796 	.poll = vpfe_poll
797 };
798 
799 /*
800  * vpfe_check_format()
801  * This function adjust the input pixel format as per hardware
802  * capabilities and update the same in pixfmt.
803  * Following algorithm used :-
804  *
805  *	If given pixformat is not in the vpfe list of pix formats or not
806  *	supported by the hardware, current value of pixformat in the device
807  *	is used
808  *	If given field is not supported, then current field is used. If field
809  *	is different from current, then it is matched with that from sub device.
810  *	Minimum height is 2 lines for interlaced or tb field and 1 line for
811  *	progressive. Maximum height is clamped to active active lines of scan
812  *	Minimum width is 32 bytes in memory and width is clamped to active
813  *	pixels of scan.
814  *	bytesperline is a multiple of 32.
815  */
816 static const struct vpfe_pixel_format *
vpfe_check_format(struct vpfe_device * vpfe_dev,struct v4l2_pix_format * pixfmt)817 	vpfe_check_format(struct vpfe_device *vpfe_dev,
818 			  struct v4l2_pix_format *pixfmt)
819 {
820 	u32 min_height = 1, min_width = 32, max_width, max_height;
821 	const struct vpfe_pixel_format *vpfe_pix_fmt;
822 	u32 pix;
823 	int temp, found;
824 
825 	vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
826 	if (NULL == vpfe_pix_fmt) {
827 		/*
828 		 * use current pixel format in the vpfe device. We
829 		 * will find this pix format in the table
830 		 */
831 		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
832 		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
833 	}
834 
835 	/* check if hw supports it */
836 	temp = 0;
837 	found = 0;
838 	while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) {
839 		if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) {
840 			found = 1;
841 			break;
842 		}
843 		temp++;
844 	}
845 
846 	if (!found) {
847 		/* use current pixel format */
848 		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
849 		/*
850 		 * Since this is currently used in the vpfe device, we
851 		 * will find this pix format in the table
852 		 */
853 		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
854 	}
855 
856 	/* check what field format is supported */
857 	if (pixfmt->field == V4L2_FIELD_ANY) {
858 		/* if field is any, use current value as default */
859 		pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
860 	}
861 
862 	/*
863 	 * if field is not same as current field in the vpfe device
864 	 * try matching the field with the sub device field
865 	 */
866 	if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) {
867 		/*
868 		 * If field value is not in the supported fields, use current
869 		 * field used in the device as default
870 		 */
871 		switch (pixfmt->field) {
872 		case V4L2_FIELD_INTERLACED:
873 		case V4L2_FIELD_SEQ_TB:
874 			/* if sub device is supporting progressive, use that */
875 			if (!vpfe_dev->std_info.frame_format)
876 				pixfmt->field = V4L2_FIELD_NONE;
877 			break;
878 		case V4L2_FIELD_NONE:
879 			if (vpfe_dev->std_info.frame_format)
880 				pixfmt->field = V4L2_FIELD_INTERLACED;
881 			break;
882 
883 		default:
884 			/* use current field as default */
885 			pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
886 			break;
887 		}
888 	}
889 
890 	/* Now adjust image resolutions supported */
891 	if (pixfmt->field == V4L2_FIELD_INTERLACED ||
892 	    pixfmt->field == V4L2_FIELD_SEQ_TB)
893 		min_height = 2;
894 
895 	max_width = vpfe_dev->std_info.active_pixels;
896 	max_height = vpfe_dev->std_info.active_lines;
897 	min_width /= vpfe_pix_fmt->bpp;
898 
899 	v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n",
900 		  pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp);
901 
902 	pixfmt->width = clamp((pixfmt->width), min_width, max_width);
903 	pixfmt->height = clamp((pixfmt->height), min_height, max_height);
904 
905 	/* If interlaced, adjust height to be a multiple of 2 */
906 	if (pixfmt->field == V4L2_FIELD_INTERLACED)
907 		pixfmt->height &= (~1);
908 	/*
909 	 * recalculate bytesperline and sizeimage since width
910 	 * and height might have changed
911 	 */
912 	pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31)
913 				& ~31);
914 	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
915 		pixfmt->sizeimage =
916 			pixfmt->bytesperline * pixfmt->height +
917 			((pixfmt->bytesperline * pixfmt->height) >> 1);
918 	else
919 		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
920 
921 	v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height ="
922 		 " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
923 		 pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp,
924 		 pixfmt->bytesperline, pixfmt->sizeimage);
925 	return vpfe_pix_fmt;
926 }
927 
vpfe_querycap(struct file * file,void * priv,struct v4l2_capability * cap)928 static int vpfe_querycap(struct file *file, void  *priv,
929 			       struct v4l2_capability *cap)
930 {
931 	struct vpfe_device *vpfe_dev = video_drvdata(file);
932 
933 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n");
934 
935 	cap->version = VPFE_CAPTURE_VERSION_CODE;
936 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
937 	strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver));
938 	strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info));
939 	strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card));
940 	return 0;
941 }
942 
vpfe_g_fmt_vid_cap(struct file * file,void * priv,struct v4l2_format * fmt)943 static int vpfe_g_fmt_vid_cap(struct file *file, void *priv,
944 				struct v4l2_format *fmt)
945 {
946 	struct vpfe_device *vpfe_dev = video_drvdata(file);
947 	int ret = 0;
948 
949 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n");
950 	/* Fill in the information about format */
951 	*fmt = vpfe_dev->fmt;
952 	return ret;
953 }
954 
vpfe_enum_fmt_vid_cap(struct file * file,void * priv,struct v4l2_fmtdesc * fmt)955 static int vpfe_enum_fmt_vid_cap(struct file *file, void  *priv,
956 				   struct v4l2_fmtdesc *fmt)
957 {
958 	struct vpfe_device *vpfe_dev = video_drvdata(file);
959 	const struct vpfe_pixel_format *pix_fmt;
960 	int temp_index;
961 	u32 pix;
962 
963 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n");
964 
965 	if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0)
966 		return -EINVAL;
967 
968 	/* Fill in the information about format */
969 	pix_fmt = vpfe_lookup_pix_format(pix);
970 	if (NULL != pix_fmt) {
971 		temp_index = fmt->index;
972 		*fmt = pix_fmt->fmtdesc;
973 		fmt->index = temp_index;
974 		return 0;
975 	}
976 	return -EINVAL;
977 }
978 
vpfe_s_fmt_vid_cap(struct file * file,void * priv,struct v4l2_format * fmt)979 static int vpfe_s_fmt_vid_cap(struct file *file, void *priv,
980 				struct v4l2_format *fmt)
981 {
982 	struct vpfe_device *vpfe_dev = video_drvdata(file);
983 	const struct vpfe_pixel_format *pix_fmts;
984 	int ret = 0;
985 
986 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n");
987 
988 	/* If streaming is started, return error */
989 	if (vpfe_dev->started) {
990 		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n");
991 		return -EBUSY;
992 	}
993 
994 	/* Check for valid frame format */
995 	pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix);
996 
997 	if (NULL == pix_fmts)
998 		return -EINVAL;
999 
1000 	/* store the pixel format in the device  object */
1001 	ret = mutex_lock_interruptible(&vpfe_dev->lock);
1002 	if (ret)
1003 		return ret;
1004 
1005 	/* First detach any IRQ if currently attached */
1006 	vpfe_detach_irq(vpfe_dev);
1007 	vpfe_dev->fmt = *fmt;
1008 	/* set image capture parameters in the ccdc */
1009 	ret = vpfe_config_ccdc_image_format(vpfe_dev);
1010 	mutex_unlock(&vpfe_dev->lock);
1011 	return ret;
1012 }
1013 
vpfe_try_fmt_vid_cap(struct file * file,void * priv,struct v4l2_format * f)1014 static int vpfe_try_fmt_vid_cap(struct file *file, void *priv,
1015 				  struct v4l2_format *f)
1016 {
1017 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1018 	const struct vpfe_pixel_format *pix_fmts;
1019 
1020 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n");
1021 
1022 	pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix);
1023 	if (NULL == pix_fmts)
1024 		return -EINVAL;
1025 	return 0;
1026 }
1027 
1028 /*
1029  * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
1030  * given app input index
1031  */
vpfe_get_subdev_input_index(struct vpfe_device * vpfe_dev,int * subdev_index,int * subdev_input_index,int app_input_index)1032 static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev,
1033 					int *subdev_index,
1034 					int *subdev_input_index,
1035 					int app_input_index)
1036 {
1037 	struct vpfe_config *cfg = vpfe_dev->cfg;
1038 	struct vpfe_subdev_info *sdinfo;
1039 	int i, j = 0;
1040 
1041 	for (i = 0; i < cfg->num_subdevs; i++) {
1042 		sdinfo = &cfg->sub_devs[i];
1043 		if (app_input_index < (j + sdinfo->num_inputs)) {
1044 			*subdev_index = i;
1045 			*subdev_input_index = app_input_index - j;
1046 			return 0;
1047 		}
1048 		j += sdinfo->num_inputs;
1049 	}
1050 	return -EINVAL;
1051 }
1052 
1053 /*
1054  * vpfe_get_app_input - Get app input index for a given subdev input index
1055  * driver stores the input index of the current sub device and translate it
1056  * when application request the current input
1057  */
vpfe_get_app_input_index(struct vpfe_device * vpfe_dev,int * app_input_index)1058 static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev,
1059 				    int *app_input_index)
1060 {
1061 	struct vpfe_config *cfg = vpfe_dev->cfg;
1062 	struct vpfe_subdev_info *sdinfo;
1063 	int i, j = 0;
1064 
1065 	for (i = 0; i < cfg->num_subdevs; i++) {
1066 		sdinfo = &cfg->sub_devs[i];
1067 		if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) {
1068 			if (vpfe_dev->current_input >= sdinfo->num_inputs)
1069 				return -1;
1070 			*app_input_index = j + vpfe_dev->current_input;
1071 			return 0;
1072 		}
1073 		j += sdinfo->num_inputs;
1074 	}
1075 	return -EINVAL;
1076 }
1077 
vpfe_enum_input(struct file * file,void * priv,struct v4l2_input * inp)1078 static int vpfe_enum_input(struct file *file, void *priv,
1079 				 struct v4l2_input *inp)
1080 {
1081 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1082 	struct vpfe_subdev_info *sdinfo;
1083 	int subdev, index ;
1084 
1085 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n");
1086 
1087 	if (vpfe_get_subdev_input_index(vpfe_dev,
1088 					&subdev,
1089 					&index,
1090 					inp->index) < 0) {
1091 		v4l2_err(&vpfe_dev->v4l2_dev, "input information not found"
1092 			 " for the subdev\n");
1093 		return -EINVAL;
1094 	}
1095 	sdinfo = &vpfe_dev->cfg->sub_devs[subdev];
1096 	memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input));
1097 	return 0;
1098 }
1099 
vpfe_g_input(struct file * file,void * priv,unsigned int * index)1100 static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
1101 {
1102 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1103 
1104 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n");
1105 
1106 	return vpfe_get_app_input_index(vpfe_dev, index);
1107 }
1108 
1109 
vpfe_s_input(struct file * file,void * priv,unsigned int index)1110 static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
1111 {
1112 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1113 	struct vpfe_subdev_info *sdinfo;
1114 	int subdev_index, inp_index;
1115 	struct vpfe_route *route;
1116 	u32 input = 0, output = 0;
1117 	int ret = -EINVAL;
1118 
1119 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n");
1120 
1121 	ret = mutex_lock_interruptible(&vpfe_dev->lock);
1122 	if (ret)
1123 		return ret;
1124 
1125 	/*
1126 	 * If streaming is started return device busy
1127 	 * error
1128 	 */
1129 	if (vpfe_dev->started) {
1130 		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n");
1131 		ret = -EBUSY;
1132 		goto unlock_out;
1133 	}
1134 
1135 	if (vpfe_get_subdev_input_index(vpfe_dev,
1136 					&subdev_index,
1137 					&inp_index,
1138 					index) < 0) {
1139 		v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n");
1140 		goto unlock_out;
1141 	}
1142 
1143 	sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index];
1144 	route = &sdinfo->routes[inp_index];
1145 	if (route && sdinfo->can_route) {
1146 		input = route->input;
1147 		output = route->output;
1148 	}
1149 
1150 	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
1151 					 video, s_routing, input, output, 0);
1152 
1153 	if (ret) {
1154 		v4l2_err(&vpfe_dev->v4l2_dev,
1155 			"vpfe_doioctl:error in setting input in decoder\n");
1156 		ret = -EINVAL;
1157 		goto unlock_out;
1158 	}
1159 	vpfe_dev->current_subdev = sdinfo;
1160 	vpfe_dev->current_input = index;
1161 	vpfe_dev->std_index = 0;
1162 
1163 	/* set the bus/interface parameter for the sub device in ccdc */
1164 	ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params);
1165 	if (ret)
1166 		goto unlock_out;
1167 
1168 	/* set the default image parameters in the device */
1169 	ret = vpfe_config_image_format(vpfe_dev,
1170 				&vpfe_standards[vpfe_dev->std_index].std_id);
1171 unlock_out:
1172 	mutex_unlock(&vpfe_dev->lock);
1173 	return ret;
1174 }
1175 
vpfe_querystd(struct file * file,void * priv,v4l2_std_id * std_id)1176 static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
1177 {
1178 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1179 	struct vpfe_subdev_info *sdinfo;
1180 	int ret = 0;
1181 
1182 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n");
1183 
1184 	ret = mutex_lock_interruptible(&vpfe_dev->lock);
1185 	sdinfo = vpfe_dev->current_subdev;
1186 	if (ret)
1187 		return ret;
1188 	/* Call querystd function of decoder device */
1189 	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
1190 					 video, querystd, std_id);
1191 	mutex_unlock(&vpfe_dev->lock);
1192 	return ret;
1193 }
1194 
vpfe_s_std(struct file * file,void * priv,v4l2_std_id * std_id)1195 static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id *std_id)
1196 {
1197 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1198 	struct vpfe_subdev_info *sdinfo;
1199 	int ret = 0;
1200 
1201 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n");
1202 
1203 	/* Call decoder driver function to set the standard */
1204 	ret = mutex_lock_interruptible(&vpfe_dev->lock);
1205 	if (ret)
1206 		return ret;
1207 
1208 	sdinfo = vpfe_dev->current_subdev;
1209 	/* If streaming is started, return device busy error */
1210 	if (vpfe_dev->started) {
1211 		v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n");
1212 		ret = -EBUSY;
1213 		goto unlock_out;
1214 	}
1215 
1216 	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
1217 					 core, s_std, *std_id);
1218 	if (ret < 0) {
1219 		v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n");
1220 		goto unlock_out;
1221 	}
1222 	ret = vpfe_config_image_format(vpfe_dev, std_id);
1223 
1224 unlock_out:
1225 	mutex_unlock(&vpfe_dev->lock);
1226 	return ret;
1227 }
1228 
vpfe_g_std(struct file * file,void * priv,v4l2_std_id * std_id)1229 static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
1230 {
1231 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1232 
1233 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n");
1234 
1235 	*std_id = vpfe_standards[vpfe_dev->std_index].std_id;
1236 	return 0;
1237 }
1238 /*
1239  *  Videobuf operations
1240  */
vpfe_videobuf_setup(struct videobuf_queue * vq,unsigned int * count,unsigned int * size)1241 static int vpfe_videobuf_setup(struct videobuf_queue *vq,
1242 				unsigned int *count,
1243 				unsigned int *size)
1244 {
1245 	struct vpfe_fh *fh = vq->priv_data;
1246 	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
1247 
1248 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n");
1249 	*size = vpfe_dev->fmt.fmt.pix.sizeimage;
1250 	if (vpfe_dev->memory == V4L2_MEMORY_MMAP &&
1251 		vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize)
1252 		*size = config_params.device_bufsize;
1253 
1254 	if (*count < config_params.min_numbuffers)
1255 		*count = config_params.min_numbuffers;
1256 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
1257 		"count=%d, size=%d\n", *count, *size);
1258 	return 0;
1259 }
1260 
vpfe_videobuf_prepare(struct videobuf_queue * vq,struct videobuf_buffer * vb,enum v4l2_field field)1261 static int vpfe_videobuf_prepare(struct videobuf_queue *vq,
1262 				struct videobuf_buffer *vb,
1263 				enum v4l2_field field)
1264 {
1265 	struct vpfe_fh *fh = vq->priv_data;
1266 	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
1267 	unsigned long addr;
1268 	int ret;
1269 
1270 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n");
1271 
1272 	/* If buffer is not initialized, initialize it */
1273 	if (VIDEOBUF_NEEDS_INIT == vb->state) {
1274 		vb->width = vpfe_dev->fmt.fmt.pix.width;
1275 		vb->height = vpfe_dev->fmt.fmt.pix.height;
1276 		vb->size = vpfe_dev->fmt.fmt.pix.sizeimage;
1277 		vb->field = field;
1278 
1279 		ret = videobuf_iolock(vq, vb, NULL);
1280 		if (ret < 0)
1281 			return ret;
1282 
1283 		addr = videobuf_to_dma_contig(vb);
1284 		/* Make sure user addresses are aligned to 32 bytes */
1285 		if (!ALIGN(addr, 32))
1286 			return -EINVAL;
1287 
1288 		vb->state = VIDEOBUF_PREPARED;
1289 	}
1290 	return 0;
1291 }
1292 
vpfe_videobuf_queue(struct videobuf_queue * vq,struct videobuf_buffer * vb)1293 static void vpfe_videobuf_queue(struct videobuf_queue *vq,
1294 				struct videobuf_buffer *vb)
1295 {
1296 	/* Get the file handle object and device object */
1297 	struct vpfe_fh *fh = vq->priv_data;
1298 	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
1299 	unsigned long flags;
1300 
1301 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n");
1302 
1303 	/* add the buffer to the DMA queue */
1304 	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
1305 	list_add_tail(&vb->queue, &vpfe_dev->dma_queue);
1306 	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
1307 
1308 	/* Change state of the buffer */
1309 	vb->state = VIDEOBUF_QUEUED;
1310 }
1311 
vpfe_videobuf_release(struct videobuf_queue * vq,struct videobuf_buffer * vb)1312 static void vpfe_videobuf_release(struct videobuf_queue *vq,
1313 				  struct videobuf_buffer *vb)
1314 {
1315 	struct vpfe_fh *fh = vq->priv_data;
1316 	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
1317 	unsigned long flags;
1318 
1319 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n");
1320 
1321 	/*
1322 	 * We need to flush the buffer from the dma queue since
1323 	 * they are de-allocated
1324 	 */
1325 	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
1326 	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
1327 	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
1328 	videobuf_dma_contig_free(vq, vb);
1329 	vb->state = VIDEOBUF_NEEDS_INIT;
1330 }
1331 
1332 static struct videobuf_queue_ops vpfe_videobuf_qops = {
1333 	.buf_setup      = vpfe_videobuf_setup,
1334 	.buf_prepare    = vpfe_videobuf_prepare,
1335 	.buf_queue      = vpfe_videobuf_queue,
1336 	.buf_release    = vpfe_videobuf_release,
1337 };
1338 
1339 /*
1340  * vpfe_reqbufs. currently support REQBUF only once opening
1341  * the device.
1342  */
vpfe_reqbufs(struct file * file,void * priv,struct v4l2_requestbuffers * req_buf)1343 static int vpfe_reqbufs(struct file *file, void *priv,
1344 			struct v4l2_requestbuffers *req_buf)
1345 {
1346 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1347 	struct vpfe_fh *fh = file->private_data;
1348 	int ret = 0;
1349 
1350 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n");
1351 
1352 	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) {
1353 		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n");
1354 		return -EINVAL;
1355 	}
1356 
1357 	ret = mutex_lock_interruptible(&vpfe_dev->lock);
1358 	if (ret)
1359 		return ret;
1360 
1361 	if (vpfe_dev->io_usrs != 0) {
1362 		v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n");
1363 		ret = -EBUSY;
1364 		goto unlock_out;
1365 	}
1366 
1367 	vpfe_dev->memory = req_buf->memory;
1368 	videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue,
1369 				&vpfe_videobuf_qops,
1370 				vpfe_dev->pdev,
1371 				&vpfe_dev->irqlock,
1372 				req_buf->type,
1373 				vpfe_dev->fmt.fmt.pix.field,
1374 				sizeof(struct videobuf_buffer),
1375 				fh, NULL);
1376 
1377 	fh->io_allowed = 1;
1378 	vpfe_dev->io_usrs = 1;
1379 	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
1380 	ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf);
1381 unlock_out:
1382 	mutex_unlock(&vpfe_dev->lock);
1383 	return ret;
1384 }
1385 
vpfe_querybuf(struct file * file,void * priv,struct v4l2_buffer * buf)1386 static int vpfe_querybuf(struct file *file, void *priv,
1387 			 struct v4l2_buffer *buf)
1388 {
1389 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1390 
1391 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n");
1392 
1393 	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
1394 		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
1395 		return  -EINVAL;
1396 	}
1397 
1398 	if (vpfe_dev->memory != V4L2_MEMORY_MMAP) {
1399 		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n");
1400 		return -EINVAL;
1401 	}
1402 	/* Call videobuf_querybuf to get information */
1403 	return videobuf_querybuf(&vpfe_dev->buffer_queue, buf);
1404 }
1405 
vpfe_qbuf(struct file * file,void * priv,struct v4l2_buffer * p)1406 static int vpfe_qbuf(struct file *file, void *priv,
1407 		     struct v4l2_buffer *p)
1408 {
1409 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1410 	struct vpfe_fh *fh = file->private_data;
1411 
1412 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n");
1413 
1414 	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) {
1415 		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
1416 		return -EINVAL;
1417 	}
1418 
1419 	/*
1420 	 * If this file handle is not allowed to do IO,
1421 	 * return error
1422 	 */
1423 	if (!fh->io_allowed) {
1424 		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
1425 		return -EACCES;
1426 	}
1427 	return videobuf_qbuf(&vpfe_dev->buffer_queue, p);
1428 }
1429 
vpfe_dqbuf(struct file * file,void * priv,struct v4l2_buffer * buf)1430 static int vpfe_dqbuf(struct file *file, void *priv,
1431 		      struct v4l2_buffer *buf)
1432 {
1433 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1434 
1435 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n");
1436 
1437 	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
1438 		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
1439 		return -EINVAL;
1440 	}
1441 	return videobuf_dqbuf(&vpfe_dev->buffer_queue,
1442 				      buf, file->f_flags & O_NONBLOCK);
1443 }
1444 
vpfe_queryctrl(struct file * file,void * priv,struct v4l2_queryctrl * qctrl)1445 static int vpfe_queryctrl(struct file *file, void *priv,
1446 		struct v4l2_queryctrl *qctrl)
1447 {
1448 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1449 	struct vpfe_subdev_info *sdinfo;
1450 
1451 	sdinfo = vpfe_dev->current_subdev;
1452 
1453 	return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
1454 					 core, queryctrl, qctrl);
1455 
1456 }
1457 
vpfe_g_ctrl(struct file * file,void * priv,struct v4l2_control * ctrl)1458 static int vpfe_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl)
1459 {
1460 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1461 	struct vpfe_subdev_info *sdinfo;
1462 
1463 	sdinfo = vpfe_dev->current_subdev;
1464 
1465 	return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
1466 					 core, g_ctrl, ctrl);
1467 }
1468 
vpfe_s_ctrl(struct file * file,void * priv,struct v4l2_control * ctrl)1469 static int vpfe_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl)
1470 {
1471 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1472 	struct vpfe_subdev_info *sdinfo;
1473 
1474 	sdinfo = vpfe_dev->current_subdev;
1475 
1476 	return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
1477 					 core, s_ctrl, ctrl);
1478 }
1479 
1480 /*
1481  * vpfe_calculate_offsets : This function calculates buffers offset
1482  * for top and bottom field
1483  */
vpfe_calculate_offsets(struct vpfe_device * vpfe_dev)1484 static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev)
1485 {
1486 	struct v4l2_rect image_win;
1487 
1488 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n");
1489 
1490 	ccdc_dev->hw_ops.get_image_window(&image_win);
1491 	vpfe_dev->field_off = image_win.height * image_win.width;
1492 }
1493 
1494 /* vpfe_start_ccdc_capture: start streaming in ccdc/isif */
vpfe_start_ccdc_capture(struct vpfe_device * vpfe_dev)1495 static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev)
1496 {
1497 	ccdc_dev->hw_ops.enable(1);
1498 	if (ccdc_dev->hw_ops.enable_out_to_sdram)
1499 		ccdc_dev->hw_ops.enable_out_to_sdram(1);
1500 	vpfe_dev->started = 1;
1501 }
1502 
1503 /*
1504  * vpfe_streamon. Assume the DMA queue is not empty.
1505  * application is expected to call QBUF before calling
1506  * this ioctl. If not, driver returns error
1507  */
vpfe_streamon(struct file * file,void * priv,enum v4l2_buf_type buf_type)1508 static int vpfe_streamon(struct file *file, void *priv,
1509 			 enum v4l2_buf_type buf_type)
1510 {
1511 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1512 	struct vpfe_fh *fh = file->private_data;
1513 	struct vpfe_subdev_info *sdinfo;
1514 	unsigned long addr;
1515 	int ret = 0;
1516 
1517 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n");
1518 
1519 	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
1520 		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
1521 		return -EINVAL;
1522 	}
1523 
1524 	/* If file handle is not allowed IO, return error */
1525 	if (!fh->io_allowed) {
1526 		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
1527 		return -EACCES;
1528 	}
1529 
1530 	sdinfo = vpfe_dev->current_subdev;
1531 	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
1532 					video, s_stream, 1);
1533 
1534 	if (ret && (ret != -ENOIOCTLCMD)) {
1535 		v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n");
1536 		return -EINVAL;
1537 	}
1538 
1539 	/* If buffer queue is empty, return error */
1540 	if (list_empty(&vpfe_dev->buffer_queue.stream)) {
1541 		v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n");
1542 		return -EIO;
1543 	}
1544 
1545 	/* Call videobuf_streamon to start streaming * in videobuf */
1546 	ret = videobuf_streamon(&vpfe_dev->buffer_queue);
1547 	if (ret)
1548 		return ret;
1549 
1550 
1551 	ret = mutex_lock_interruptible(&vpfe_dev->lock);
1552 	if (ret)
1553 		goto streamoff;
1554 	/* Get the next frame from the buffer queue */
1555 	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
1556 					struct videobuf_buffer, queue);
1557 	vpfe_dev->cur_frm = vpfe_dev->next_frm;
1558 	/* Remove buffer from the buffer queue */
1559 	list_del(&vpfe_dev->cur_frm->queue);
1560 	/* Mark state of the current frame to active */
1561 	vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE;
1562 	/* Initialize field_id and started member */
1563 	vpfe_dev->field_id = 0;
1564 	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
1565 
1566 	/* Calculate field offset */
1567 	vpfe_calculate_offsets(vpfe_dev);
1568 
1569 	if (vpfe_attach_irq(vpfe_dev) < 0) {
1570 		v4l2_err(&vpfe_dev->v4l2_dev,
1571 			 "Error in attaching interrupt handle\n");
1572 		ret = -EFAULT;
1573 		goto unlock_out;
1574 	}
1575 	if (ccdc_dev->hw_ops.configure() < 0) {
1576 		v4l2_err(&vpfe_dev->v4l2_dev,
1577 			 "Error in configuring ccdc\n");
1578 		ret = -EINVAL;
1579 		goto unlock_out;
1580 	}
1581 	ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr));
1582 	vpfe_start_ccdc_capture(vpfe_dev);
1583 	mutex_unlock(&vpfe_dev->lock);
1584 	return ret;
1585 unlock_out:
1586 	mutex_unlock(&vpfe_dev->lock);
1587 streamoff:
1588 	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
1589 	return ret;
1590 }
1591 
vpfe_streamoff(struct file * file,void * priv,enum v4l2_buf_type buf_type)1592 static int vpfe_streamoff(struct file *file, void *priv,
1593 			  enum v4l2_buf_type buf_type)
1594 {
1595 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1596 	struct vpfe_fh *fh = file->private_data;
1597 	struct vpfe_subdev_info *sdinfo;
1598 	int ret = 0;
1599 
1600 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n");
1601 
1602 	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
1603 		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
1604 		return -EINVAL;
1605 	}
1606 
1607 	/* If io is allowed for this file handle, return error */
1608 	if (!fh->io_allowed) {
1609 		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
1610 		return -EACCES;
1611 	}
1612 
1613 	/* If streaming is not started, return error */
1614 	if (!vpfe_dev->started) {
1615 		v4l2_err(&vpfe_dev->v4l2_dev, "device started\n");
1616 		return -EINVAL;
1617 	}
1618 
1619 	ret = mutex_lock_interruptible(&vpfe_dev->lock);
1620 	if (ret)
1621 		return ret;
1622 
1623 	vpfe_stop_ccdc_capture(vpfe_dev);
1624 	vpfe_detach_irq(vpfe_dev);
1625 
1626 	sdinfo = vpfe_dev->current_subdev;
1627 	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
1628 					video, s_stream, 0);
1629 
1630 	if (ret && (ret != -ENOIOCTLCMD))
1631 		v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n");
1632 	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
1633 	mutex_unlock(&vpfe_dev->lock);
1634 	return ret;
1635 }
1636 
vpfe_cropcap(struct file * file,void * priv,struct v4l2_cropcap * crop)1637 static int vpfe_cropcap(struct file *file, void *priv,
1638 			      struct v4l2_cropcap *crop)
1639 {
1640 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1641 
1642 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n");
1643 
1644 	if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards))
1645 		return -EINVAL;
1646 
1647 	memset(crop, 0, sizeof(struct v4l2_cropcap));
1648 	crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1649 	crop->bounds.width = crop->defrect.width =
1650 		vpfe_standards[vpfe_dev->std_index].width;
1651 	crop->bounds.height = crop->defrect.height =
1652 		vpfe_standards[vpfe_dev->std_index].height;
1653 	crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect;
1654 	return 0;
1655 }
1656 
vpfe_g_crop(struct file * file,void * priv,struct v4l2_crop * crop)1657 static int vpfe_g_crop(struct file *file, void *priv,
1658 			     struct v4l2_crop *crop)
1659 {
1660 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1661 
1662 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n");
1663 
1664 	crop->c = vpfe_dev->crop;
1665 	return 0;
1666 }
1667 
vpfe_s_crop(struct file * file,void * priv,struct v4l2_crop * crop)1668 static int vpfe_s_crop(struct file *file, void *priv,
1669 			     struct v4l2_crop *crop)
1670 {
1671 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1672 	int ret = 0;
1673 
1674 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n");
1675 
1676 	if (vpfe_dev->started) {
1677 		/* make sure streaming is not started */
1678 		v4l2_err(&vpfe_dev->v4l2_dev,
1679 			"Cannot change crop when streaming is ON\n");
1680 		return -EBUSY;
1681 	}
1682 
1683 	ret = mutex_lock_interruptible(&vpfe_dev->lock);
1684 	if (ret)
1685 		return ret;
1686 
1687 	if (crop->c.top < 0 || crop->c.left < 0) {
1688 		v4l2_err(&vpfe_dev->v4l2_dev,
1689 			"doesn't support negative values for top & left\n");
1690 		ret = -EINVAL;
1691 		goto unlock_out;
1692 	}
1693 
1694 	/* adjust the width to 16 pixel boundary */
1695 	crop->c.width = ((crop->c.width + 15) & ~0xf);
1696 
1697 	/* make sure parameters are valid */
1698 	if ((crop->c.left + crop->c.width >
1699 		vpfe_dev->std_info.active_pixels) ||
1700 	    (crop->c.top + crop->c.height >
1701 		vpfe_dev->std_info.active_lines)) {
1702 		v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n");
1703 		ret = -EINVAL;
1704 		goto unlock_out;
1705 	}
1706 	ccdc_dev->hw_ops.set_image_window(&crop->c);
1707 	vpfe_dev->fmt.fmt.pix.width = crop->c.width;
1708 	vpfe_dev->fmt.fmt.pix.height = crop->c.height;
1709 	vpfe_dev->fmt.fmt.pix.bytesperline =
1710 		ccdc_dev->hw_ops.get_line_length();
1711 	vpfe_dev->fmt.fmt.pix.sizeimage =
1712 		vpfe_dev->fmt.fmt.pix.bytesperline *
1713 		vpfe_dev->fmt.fmt.pix.height;
1714 	vpfe_dev->crop = crop->c;
1715 unlock_out:
1716 	mutex_unlock(&vpfe_dev->lock);
1717 	return ret;
1718 }
1719 
1720 
vpfe_param_handler(struct file * file,void * priv,bool valid_prio,int cmd,void * param)1721 static long vpfe_param_handler(struct file *file, void *priv,
1722 		bool valid_prio, int cmd, void *param)
1723 {
1724 	struct vpfe_device *vpfe_dev = video_drvdata(file);
1725 	int ret = 0;
1726 
1727 	v4l2_dbg(2, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n");
1728 
1729 	if (vpfe_dev->started) {
1730 		/* only allowed if streaming is not started */
1731 		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
1732 			"device already started\n");
1733 		return -EBUSY;
1734 	}
1735 
1736 	ret = mutex_lock_interruptible(&vpfe_dev->lock);
1737 	if (ret)
1738 		return ret;
1739 
1740 	switch (cmd) {
1741 	case VPFE_CMD_S_CCDC_RAW_PARAMS:
1742 		v4l2_warn(&vpfe_dev->v4l2_dev,
1743 			  "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n");
1744 		if (ccdc_dev->hw_ops.set_params) {
1745 			ret = ccdc_dev->hw_ops.set_params(param);
1746 			if (ret) {
1747 				v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
1748 					"Error setting parameters in CCDC\n");
1749 				goto unlock_out;
1750 			}
1751 			if (vpfe_get_ccdc_image_format(vpfe_dev,
1752 						       &vpfe_dev->fmt) < 0) {
1753 				v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
1754 					"Invalid image format at CCDC\n");
1755 				goto unlock_out;
1756 			}
1757 		} else {
1758 			ret = -EINVAL;
1759 			v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
1760 				"VPFE_CMD_S_CCDC_RAW_PARAMS not supported\n");
1761 		}
1762 		break;
1763 	default:
1764 		ret = -EINVAL;
1765 	}
1766 unlock_out:
1767 	mutex_unlock(&vpfe_dev->lock);
1768 	return ret;
1769 }
1770 
1771 
1772 /* vpfe capture ioctl operations */
1773 static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
1774 	.vidioc_querycap	 = vpfe_querycap,
1775 	.vidioc_g_fmt_vid_cap    = vpfe_g_fmt_vid_cap,
1776 	.vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap,
1777 	.vidioc_s_fmt_vid_cap    = vpfe_s_fmt_vid_cap,
1778 	.vidioc_try_fmt_vid_cap  = vpfe_try_fmt_vid_cap,
1779 	.vidioc_enum_input	 = vpfe_enum_input,
1780 	.vidioc_g_input		 = vpfe_g_input,
1781 	.vidioc_s_input		 = vpfe_s_input,
1782 	.vidioc_querystd	 = vpfe_querystd,
1783 	.vidioc_s_std		 = vpfe_s_std,
1784 	.vidioc_g_std		 = vpfe_g_std,
1785 	.vidioc_queryctrl	 = vpfe_queryctrl,
1786 	.vidioc_g_ctrl		 = vpfe_g_ctrl,
1787 	.vidioc_s_ctrl		 = vpfe_s_ctrl,
1788 	.vidioc_reqbufs		 = vpfe_reqbufs,
1789 	.vidioc_querybuf	 = vpfe_querybuf,
1790 	.vidioc_qbuf		 = vpfe_qbuf,
1791 	.vidioc_dqbuf		 = vpfe_dqbuf,
1792 	.vidioc_streamon	 = vpfe_streamon,
1793 	.vidioc_streamoff	 = vpfe_streamoff,
1794 	.vidioc_cropcap		 = vpfe_cropcap,
1795 	.vidioc_g_crop		 = vpfe_g_crop,
1796 	.vidioc_s_crop		 = vpfe_s_crop,
1797 	.vidioc_default		 = vpfe_param_handler,
1798 };
1799 
vpfe_initialize(void)1800 static struct vpfe_device *vpfe_initialize(void)
1801 {
1802 	struct vpfe_device *vpfe_dev;
1803 
1804 	/* Default number of buffers should be 3 */
1805 	if ((numbuffers > 0) &&
1806 	    (numbuffers < config_params.min_numbuffers))
1807 		numbuffers = config_params.min_numbuffers;
1808 
1809 	/*
1810 	 * Set buffer size to min buffers size if invalid buffer size is
1811 	 * given
1812 	 */
1813 	if (bufsize < config_params.min_bufsize)
1814 		bufsize = config_params.min_bufsize;
1815 
1816 	config_params.numbuffers = numbuffers;
1817 
1818 	if (numbuffers)
1819 		config_params.device_bufsize = bufsize;
1820 
1821 	/* Allocate memory for device objects */
1822 	vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL);
1823 
1824 	return vpfe_dev;
1825 }
1826 
1827 /*
1828  * vpfe_probe : This function creates device entries by register
1829  * itself to the V4L2 driver and initializes fields of each
1830  * device objects
1831  */
vpfe_probe(struct platform_device * pdev)1832 static __init int vpfe_probe(struct platform_device *pdev)
1833 {
1834 	struct vpfe_subdev_info *sdinfo;
1835 	struct vpfe_config *vpfe_cfg;
1836 	struct resource *res1;
1837 	struct vpfe_device *vpfe_dev;
1838 	struct i2c_adapter *i2c_adap;
1839 	struct video_device *vfd;
1840 	int ret = -ENOMEM, i, j;
1841 	int num_subdevs = 0;
1842 
1843 	/* Get the pointer to the device object */
1844 	vpfe_dev = vpfe_initialize();
1845 
1846 	if (!vpfe_dev) {
1847 		v4l2_err(pdev->dev.driver,
1848 			"Failed to allocate memory for vpfe_dev\n");
1849 		return ret;
1850 	}
1851 
1852 	vpfe_dev->pdev = &pdev->dev;
1853 
1854 	if (NULL == pdev->dev.platform_data) {
1855 		v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n");
1856 		ret = -ENODEV;
1857 		goto probe_free_dev_mem;
1858 	}
1859 
1860 	vpfe_cfg = pdev->dev.platform_data;
1861 	vpfe_dev->cfg = vpfe_cfg;
1862 	if (NULL == vpfe_cfg->ccdc ||
1863 	    NULL == vpfe_cfg->card_name ||
1864 	    NULL == vpfe_cfg->sub_devs) {
1865 		v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n");
1866 		ret = -ENOENT;
1867 		goto probe_free_dev_mem;
1868 	}
1869 
1870 	/* Allocate memory for ccdc configuration */
1871 	ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL);
1872 	if (NULL == ccdc_cfg) {
1873 		v4l2_err(pdev->dev.driver,
1874 			 "Memory allocation failed for ccdc_cfg\n");
1875 		goto probe_free_lock;
1876 	}
1877 
1878 	mutex_lock(&ccdc_lock);
1879 
1880 	strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32);
1881 	/* Get VINT0 irq resource */
1882 	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1883 	if (!res1) {
1884 		v4l2_err(pdev->dev.driver,
1885 			 "Unable to get interrupt for VINT0\n");
1886 		ret = -ENODEV;
1887 		goto probe_free_ccdc_cfg_mem;
1888 	}
1889 	vpfe_dev->ccdc_irq0 = res1->start;
1890 
1891 	/* Get VINT1 irq resource */
1892 	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
1893 	if (!res1) {
1894 		v4l2_err(pdev->dev.driver,
1895 			 "Unable to get interrupt for VINT1\n");
1896 		ret = -ENODEV;
1897 		goto probe_free_ccdc_cfg_mem;
1898 	}
1899 	vpfe_dev->ccdc_irq1 = res1->start;
1900 
1901 	ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED,
1902 			  "vpfe_capture0", vpfe_dev);
1903 
1904 	if (0 != ret) {
1905 		v4l2_err(pdev->dev.driver, "Unable to request interrupt\n");
1906 		goto probe_free_ccdc_cfg_mem;
1907 	}
1908 
1909 	/* Allocate memory for video device */
1910 	vfd = video_device_alloc();
1911 	if (NULL == vfd) {
1912 		ret = -ENOMEM;
1913 		v4l2_err(pdev->dev.driver, "Unable to alloc video device\n");
1914 		goto probe_out_release_irq;
1915 	}
1916 
1917 	/* Initialize field of video device */
1918 	vfd->release		= video_device_release;
1919 	vfd->fops		= &vpfe_fops;
1920 	vfd->ioctl_ops		= &vpfe_ioctl_ops;
1921 	vfd->tvnorms		= 0;
1922 	vfd->current_norm	= V4L2_STD_PAL;
1923 	vfd->v4l2_dev 		= &vpfe_dev->v4l2_dev;
1924 	snprintf(vfd->name, sizeof(vfd->name),
1925 		 "%s_V%d.%d.%d",
1926 		 CAPTURE_DRV_NAME,
1927 		 (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff,
1928 		 (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff,
1929 		 (VPFE_CAPTURE_VERSION_CODE) & 0xff);
1930 	/* Set video_dev to the video device */
1931 	vpfe_dev->video_dev	= vfd;
1932 
1933 	ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev);
1934 	if (ret) {
1935 		v4l2_err(pdev->dev.driver,
1936 			"Unable to register v4l2 device.\n");
1937 		goto probe_out_video_release;
1938 	}
1939 	v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n");
1940 	spin_lock_init(&vpfe_dev->irqlock);
1941 	spin_lock_init(&vpfe_dev->dma_queue_lock);
1942 	mutex_init(&vpfe_dev->lock);
1943 
1944 	/* Initialize field of the device objects */
1945 	vpfe_dev->numbuffers = config_params.numbuffers;
1946 
1947 	/* Initialize prio member of device object */
1948 	v4l2_prio_init(&vpfe_dev->prio);
1949 	/* register video device */
1950 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
1951 		"trying to register vpfe device.\n");
1952 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
1953 		"video_dev=%x\n", (int)&vpfe_dev->video_dev);
1954 	vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1955 	ret = video_register_device(vpfe_dev->video_dev,
1956 				    VFL_TYPE_GRABBER, -1);
1957 
1958 	if (ret) {
1959 		v4l2_err(pdev->dev.driver,
1960 			"Unable to register video device.\n");
1961 		goto probe_out_v4l2_unregister;
1962 	}
1963 
1964 	v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n");
1965 	/* set the driver data in platform device */
1966 	platform_set_drvdata(pdev, vpfe_dev);
1967 	/* set driver private data */
1968 	video_set_drvdata(vpfe_dev->video_dev, vpfe_dev);
1969 	i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id);
1970 	num_subdevs = vpfe_cfg->num_subdevs;
1971 	vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs,
1972 				GFP_KERNEL);
1973 	if (NULL == vpfe_dev->sd) {
1974 		v4l2_err(&vpfe_dev->v4l2_dev,
1975 			"unable to allocate memory for subdevice pointers\n");
1976 		ret = -ENOMEM;
1977 		goto probe_out_video_unregister;
1978 	}
1979 
1980 	for (i = 0; i < num_subdevs; i++) {
1981 		struct v4l2_input *inps;
1982 
1983 		sdinfo = &vpfe_cfg->sub_devs[i];
1984 
1985 		/* Load up the subdevice */
1986 		vpfe_dev->sd[i] =
1987 			v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
1988 						  i2c_adap,
1989 						  &sdinfo->board_info,
1990 						  NULL);
1991 		if (vpfe_dev->sd[i]) {
1992 			v4l2_info(&vpfe_dev->v4l2_dev,
1993 				  "v4l2 sub device %s registered\n",
1994 				  sdinfo->name);
1995 			vpfe_dev->sd[i]->grp_id = sdinfo->grp_id;
1996 			/* update tvnorms from the sub devices */
1997 			for (j = 0; j < sdinfo->num_inputs; j++) {
1998 				inps = &sdinfo->inputs[j];
1999 				vfd->tvnorms |= inps->std;
2000 			}
2001 		} else {
2002 			v4l2_info(&vpfe_dev->v4l2_dev,
2003 				  "v4l2 sub device %s register fails\n",
2004 				  sdinfo->name);
2005 			goto probe_sd_out;
2006 		}
2007 	}
2008 
2009 	/* set first sub device as current one */
2010 	vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0];
2011 
2012 	/* We have at least one sub device to work with */
2013 	mutex_unlock(&ccdc_lock);
2014 	return 0;
2015 
2016 probe_sd_out:
2017 	kfree(vpfe_dev->sd);
2018 probe_out_video_unregister:
2019 	video_unregister_device(vpfe_dev->video_dev);
2020 probe_out_v4l2_unregister:
2021 	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
2022 probe_out_video_release:
2023 	if (!video_is_registered(vpfe_dev->video_dev))
2024 		video_device_release(vpfe_dev->video_dev);
2025 probe_out_release_irq:
2026 	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
2027 probe_free_ccdc_cfg_mem:
2028 	kfree(ccdc_cfg);
2029 probe_free_lock:
2030 	mutex_unlock(&ccdc_lock);
2031 probe_free_dev_mem:
2032 	kfree(vpfe_dev);
2033 	return ret;
2034 }
2035 
2036 /*
2037  * vpfe_remove : It un-register device from V4L2 driver
2038  */
vpfe_remove(struct platform_device * pdev)2039 static int __devexit vpfe_remove(struct platform_device *pdev)
2040 {
2041 	struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev);
2042 
2043 	v4l2_info(pdev->dev.driver, "vpfe_remove\n");
2044 
2045 	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
2046 	kfree(vpfe_dev->sd);
2047 	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
2048 	video_unregister_device(vpfe_dev->video_dev);
2049 	kfree(vpfe_dev);
2050 	kfree(ccdc_cfg);
2051 	return 0;
2052 }
2053 
vpfe_suspend(struct device * dev)2054 static int vpfe_suspend(struct device *dev)
2055 {
2056 	return 0;
2057 }
2058 
vpfe_resume(struct device * dev)2059 static int vpfe_resume(struct device *dev)
2060 {
2061 	return 0;
2062 }
2063 
2064 static const struct dev_pm_ops vpfe_dev_pm_ops = {
2065 	.suspend = vpfe_suspend,
2066 	.resume = vpfe_resume,
2067 };
2068 
2069 static struct platform_driver vpfe_driver = {
2070 	.driver = {
2071 		.name = CAPTURE_DRV_NAME,
2072 		.owner = THIS_MODULE,
2073 		.pm = &vpfe_dev_pm_ops,
2074 	},
2075 	.probe = vpfe_probe,
2076 	.remove = __devexit_p(vpfe_remove),
2077 };
2078 
2079 module_platform_driver(vpfe_driver);
2080