1 /*
2  * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
3  *
4  * Authors: 	Shlomi Gridish <gridish@freescale.com>
5  * 		Li Yang <leoli@freescale.com>
6  *
7  * Description:
8  * Internal header file for UCC SLOW unit routines.
9  *
10  * This program is free software; you can redistribute  it and/or modify it
11  * under  the terms of  the GNU General  Public License as published by the
12  * Free Software Foundation;  either version 2 of the  License, or (at your
13  * option) any later version.
14  */
15 #ifndef __UCC_SLOW_H__
16 #define __UCC_SLOW_H__
17 
18 #include <linux/kernel.h>
19 
20 #include <asm/immap_qe.h>
21 #include <asm/qe.h>
22 
23 #include "ucc.h"
24 
25 /* transmit BD's status */
26 #define T_R	0x80000000	/* ready bit */
27 #define T_PAD	0x40000000	/* add pads to short frames */
28 #define T_W	0x20000000	/* wrap bit */
29 #define T_I	0x10000000	/* interrupt on completion */
30 #define T_L	0x08000000	/* last */
31 
32 #define T_A	0x04000000	/* Address - the data transmitted as address
33 				   chars */
34 #define T_TC	0x04000000	/* transmit CRC */
35 #define T_CM	0x02000000	/* continuous mode */
36 #define T_DEF	0x02000000	/* collision on previous attempt to transmit */
37 #define T_P	0x01000000	/* Preamble - send Preamble sequence before
38 				   data */
39 #define T_HB	0x01000000	/* heartbeat */
40 #define T_NS	0x00800000	/* No Stop */
41 #define T_LC	0x00800000	/* late collision */
42 #define T_RL	0x00400000	/* retransmission limit */
43 #define T_UN	0x00020000	/* underrun */
44 #define T_CT	0x00010000	/* CTS lost */
45 #define T_CSL	0x00010000	/* carrier sense lost */
46 #define T_RC	0x003c0000	/* retry count */
47 
48 /* Receive BD's status */
49 #define R_E	0x80000000	/* buffer empty */
50 #define R_W	0x20000000	/* wrap bit */
51 #define R_I	0x10000000	/* interrupt on reception */
52 #define R_L	0x08000000	/* last */
53 #define R_C	0x08000000	/* the last byte in this buffer is a cntl
54 				   char */
55 #define R_F	0x04000000	/* first */
56 #define R_A	0x04000000	/* the first byte in this buffer is address
57 				   byte */
58 #define R_CM	0x02000000	/* continuous mode */
59 #define R_ID	0x01000000	/* buffer close on reception of idles */
60 #define R_M	0x01000000	/* Frame received because of promiscuous
61 				   mode */
62 #define R_AM	0x00800000	/* Address match */
63 #define R_DE	0x00800000	/* Address match */
64 #define R_LG	0x00200000	/* Break received */
65 #define R_BR	0x00200000	/* Frame length violation */
66 #define R_NO	0x00100000	/* Rx Non Octet Aligned Packet */
67 #define R_FR	0x00100000	/* Framing Error (no stop bit) character
68 				   received */
69 #define R_PR	0x00080000	/* Parity Error character received */
70 #define R_AB	0x00080000	/* Frame Aborted */
71 #define R_SH	0x00080000	/* frame is too short */
72 #define R_CR	0x00040000	/* CRC Error */
73 #define R_OV	0x00020000	/* Overrun */
74 #define R_CD	0x00010000	/* CD lost */
75 #define R_CL	0x00010000	/* this frame is closed because of a
76 				   collision */
77 
78 /* Rx Data buffer must be 4 bytes aligned in most cases.*/
79 #define UCC_SLOW_RX_ALIGN		4
80 #define UCC_SLOW_MRBLR_ALIGNMENT	4
81 #define UCC_SLOW_PRAM_SIZE		0x100
82 #define ALIGNMENT_OF_UCC_SLOW_PRAM	64
83 
84 /* UCC Slow Channel Protocol Mode */
85 enum ucc_slow_channel_protocol_mode {
86 	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
87 	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
88 	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
89 };
90 
91 /* UCC Slow Transparent Transmit CRC (TCRC) */
92 enum ucc_slow_transparent_tcrc {
93 	/* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
94 	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
95 	/* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
96 	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
97 	/* 32-bit CCITT CRC (Ethernet and HDLC) */
98 	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
99 };
100 
101 /* UCC Slow oversampling rate for transmitter (TDCR) */
102 enum ucc_slow_tx_oversampling_rate {
103 	/* 1x clock mode */
104 	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
105 	/* 8x clock mode */
106 	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
107 	/* 16x clock mode */
108 	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
109 	/* 32x clock mode */
110 	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
111 };
112 
113 /* UCC Slow Oversampling rate for receiver (RDCR)
114 */
115 enum ucc_slow_rx_oversampling_rate {
116 	/* 1x clock mode */
117 	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
118 	/* 8x clock mode */
119 	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
120 	/* 16x clock mode */
121 	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
122 	/* 32x clock mode */
123 	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
124 };
125 
126 /* UCC Slow Transmitter encoding method (TENC)
127 */
128 enum ucc_slow_tx_encoding_method {
129 	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
130 	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
131 };
132 
133 /* UCC Slow Receiver decoding method (RENC)
134 */
135 enum ucc_slow_rx_decoding_method {
136 	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
137 	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
138 };
139 
140 /* UCC Slow Diagnostic mode (DIAG)
141 */
142 enum ucc_slow_diag_mode {
143 	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
144 	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
145 	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
146 	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
147 };
148 
149 struct ucc_slow_info {
150 	int ucc_num;
151 	int protocol;			/* QE_CR_PROTOCOL_xxx */
152 	enum qe_clock rx_clock;
153 	enum qe_clock tx_clock;
154 	phys_addr_t regs;
155 	int irq;
156 	u16 uccm_mask;
157 	int data_mem_part;
158 	int init_tx;
159 	int init_rx;
160 	u32 tx_bd_ring_len;
161 	u32 rx_bd_ring_len;
162 	int rx_interrupts;
163 	int brkpt_support;
164 	int grant_support;
165 	int tsa;
166 	int cdp;
167 	int cds;
168 	int ctsp;
169 	int ctss;
170 	int rinv;
171 	int tinv;
172 	int rtsm;
173 	int rfw;
174 	int tci;
175 	int tend;
176 	int tfl;
177 	int txsy;
178 	u16 max_rx_buf_length;
179 	enum ucc_slow_transparent_tcrc tcrc;
180 	enum ucc_slow_channel_protocol_mode mode;
181 	enum ucc_slow_diag_mode diag;
182 	enum ucc_slow_tx_oversampling_rate tdcr;
183 	enum ucc_slow_rx_oversampling_rate rdcr;
184 	enum ucc_slow_tx_encoding_method tenc;
185 	enum ucc_slow_rx_decoding_method renc;
186 };
187 
188 struct ucc_slow_private {
189 	struct ucc_slow_info *us_info;
190 	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
191 	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
192 	u32 us_pram_offset;
193 	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
194 	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
195 	int stopped_tx;		/* Whether channel has been stopped for Tx
196 				   (STOP_TX, etc.) */
197 	int stopped_rx;		/* Whether channel has been stopped for Rx */
198 	struct list_head confQ;	/* frames passed to chip waiting for tx */
199 	u32 first_tx_bd_mask;	/* mask is used in Tx routine to save status
200 				   and length for first BD in a frame */
201 	u32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
202 	u32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
203 	struct qe_bd *confBd;	/* next BD for confirm after Tx */
204 	struct qe_bd *tx_bd;	/* next BD for new Tx request */
205 	struct qe_bd *rx_bd;	/* next BD to collect after Rx */
206 	void *p_rx_frame;	/* accumulating receive frame */
207 	u16 *p_ucce;		/* a pointer to the event register in memory.
208 				 */
209 	u16 *p_uccm;		/* a pointer to the mask register in memory */
210 	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
211 #ifdef STATISTICS
212 	u32 tx_frames;		/* Transmitted frames counters */
213 	u32 rx_frames;		/* Received frames counters (only frames
214 				   passed to application) */
215 	u32 rx_discarded;	/* Discarded frames counters (frames that
216 				   were discarded by the driver due to
217 				   errors) */
218 #endif				/* STATISTICS */
219 };
220 
221 /* ucc_slow_init
222  * Initializes Slow UCC according to provided parameters.
223  *
224  * us_info  - (In) pointer to the slow UCC info structure.
225  * uccs_ret - (Out) pointer to the slow UCC structure.
226  */
227 int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
228 
229 /* ucc_slow_free
230  * Frees all resources for slow UCC.
231  *
232  * uccs - (In) pointer to the slow UCC structure.
233  */
234 void ucc_slow_free(struct ucc_slow_private * uccs);
235 
236 /* ucc_slow_enable
237  * Enables a fast UCC port.
238  * This routine enables Tx and/or Rx through the General UCC Mode Register.
239  *
240  * uccs - (In) pointer to the slow UCC structure.
241  * mode - (In) TX, RX, or both.
242  */
243 void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
244 
245 /* ucc_slow_disable
246  * Disables a fast UCC port.
247  * This routine disables Tx and/or Rx through the General UCC Mode Register.
248  *
249  * uccs - (In) pointer to the slow UCC structure.
250  * mode - (In) TX, RX, or both.
251  */
252 void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
253 
254 /* ucc_slow_poll_transmitter_now
255  * Immediately forces a poll of the transmitter for data to be sent.
256  * Typically, the hardware performs a periodic poll for data that the
257  * transmit routine has set up to be transmitted. In cases where
258  * this polling cycle is not soon enough, this optional routine can
259  * be invoked to force a poll right away, instead. Proper use for
260  * each transmission for which this functionality is desired is to
261  * call the transmit routine and then this routine right after.
262  *
263  * uccs - (In) pointer to the slow UCC structure.
264  */
265 void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
266 
267 /* ucc_slow_graceful_stop_tx
268  * Smoothly stops transmission on a specified slow UCC.
269  *
270  * uccs - (In) pointer to the slow UCC structure.
271  */
272 void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
273 
274 /* ucc_slow_stop_tx
275  * Stops transmission on a specified slow UCC.
276  *
277  * uccs - (In) pointer to the slow UCC structure.
278  */
279 void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
280 
281 /* ucc_slow_restart_tx
282  * Restarts transmitting on a specified slow UCC.
283  *
284  * uccs - (In) pointer to the slow UCC structure.
285  */
286 void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
287 
288 u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
289 
290 #endif				/* __UCC_SLOW_H__ */
291