1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * UHCI HCD (Host Controller Driver) for GRLIB GRUSBHC
4 *
5 * Copyright (c) 2011 Jan Andersson <jan@gaisler.com>
6 *
7 * This file is based on UHCI PCI HCD:
8 * (C) Copyright 1999 Linus Torvalds
9 * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
10 * (C) Copyright 1999 Randy Dunlap
11 * (C) Copyright 1999 Georg Acher, acher@in.tum.de
12 * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
13 * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
14 * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
15 * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
16 * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
17 * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
18 * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
19 */
20
21 #include <linux/device.h>
22 #include <linux/of_irq.h>
23 #include <linux/of_address.h>
24 #include <linux/of_platform.h>
25
uhci_grlib_init(struct usb_hcd * hcd)26 static int uhci_grlib_init(struct usb_hcd *hcd)
27 {
28 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
29
30 /*
31 * Probe to determine the endianness of the controller.
32 * We know that bit 7 of the PORTSC1 register is always set
33 * and bit 15 is always clear. If uhci_readw() yields a value
34 * with bit 7 (0x80) turned on then the current little-endian
35 * setting is correct. Otherwise we assume the value was
36 * byte-swapped; hence the register interface and presumably
37 * also the descriptors are big-endian.
38 */
39 if (!(uhci_readw(uhci, USBPORTSC1) & 0x80)) {
40 uhci->big_endian_mmio = 1;
41 uhci->big_endian_desc = 1;
42 }
43
44 uhci->rh_numports = uhci_count_ports(hcd);
45
46 /* Set up pointers to generic functions */
47 uhci->reset_hc = uhci_generic_reset_hc;
48 uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
49 /* No special actions need to be taken for the functions below */
50 uhci->configure_hc = NULL;
51 uhci->resume_detect_interrupts_are_broken = NULL;
52 uhci->global_suspend_mode_is_broken = NULL;
53
54 /* Reset if the controller isn't already safely quiescent. */
55 check_and_reset_hc(uhci);
56 return 0;
57 }
58
59 static const struct hc_driver uhci_grlib_hc_driver = {
60 .description = hcd_name,
61 .product_desc = "GRLIB GRUSBHC UHCI Host Controller",
62 .hcd_priv_size = sizeof(struct uhci_hcd),
63
64 /* Generic hardware linkage */
65 .irq = uhci_irq,
66 .flags = HCD_MEMORY | HCD_DMA | HCD_USB11,
67
68 /* Basic lifecycle operations */
69 .reset = uhci_grlib_init,
70 .start = uhci_start,
71 #ifdef CONFIG_PM
72 .pci_suspend = NULL,
73 .pci_resume = NULL,
74 .bus_suspend = uhci_rh_suspend,
75 .bus_resume = uhci_rh_resume,
76 #endif
77 .stop = uhci_stop,
78
79 .urb_enqueue = uhci_urb_enqueue,
80 .urb_dequeue = uhci_urb_dequeue,
81
82 .endpoint_disable = uhci_hcd_endpoint_disable,
83 .get_frame_number = uhci_hcd_get_frame_number,
84
85 .hub_status_data = uhci_hub_status_data,
86 .hub_control = uhci_hub_control,
87 };
88
89
uhci_hcd_grlib_probe(struct platform_device * op)90 static int uhci_hcd_grlib_probe(struct platform_device *op)
91 {
92 struct device_node *dn = op->dev.of_node;
93 struct usb_hcd *hcd;
94 struct uhci_hcd *uhci = NULL;
95 struct resource res;
96 int irq;
97 int rv;
98
99 if (usb_disabled())
100 return -ENODEV;
101
102 dev_dbg(&op->dev, "initializing GRUSBHC UHCI USB Controller\n");
103
104 rv = of_address_to_resource(dn, 0, &res);
105 if (rv)
106 return rv;
107
108 /* usb_create_hcd requires dma_mask != NULL */
109 op->dev.dma_mask = &op->dev.coherent_dma_mask;
110 hcd = usb_create_hcd(&uhci_grlib_hc_driver, &op->dev,
111 "GRUSBHC UHCI USB");
112 if (!hcd)
113 return -ENOMEM;
114
115 hcd->rsrc_start = res.start;
116 hcd->rsrc_len = resource_size(&res);
117
118 irq = irq_of_parse_and_map(dn, 0);
119 if (!irq) {
120 printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
121 rv = -EBUSY;
122 goto err_usb;
123 }
124
125 hcd->regs = devm_ioremap_resource(&op->dev, &res);
126 if (IS_ERR(hcd->regs)) {
127 rv = PTR_ERR(hcd->regs);
128 goto err_irq;
129 }
130
131 uhci = hcd_to_uhci(hcd);
132
133 uhci->regs = hcd->regs;
134
135 rv = usb_add_hcd(hcd, irq, 0);
136 if (rv)
137 goto err_irq;
138
139 device_wakeup_enable(hcd->self.controller);
140 return 0;
141
142 err_irq:
143 irq_dispose_mapping(irq);
144 err_usb:
145 usb_put_hcd(hcd);
146
147 return rv;
148 }
149
uhci_hcd_grlib_remove(struct platform_device * op)150 static void uhci_hcd_grlib_remove(struct platform_device *op)
151 {
152 struct usb_hcd *hcd = platform_get_drvdata(op);
153
154 dev_dbg(&op->dev, "stopping GRLIB GRUSBHC UHCI USB Controller\n");
155
156 usb_remove_hcd(hcd);
157
158 irq_dispose_mapping(hcd->irq);
159 usb_put_hcd(hcd);
160 }
161
162 /* Make sure the controller is quiescent and that we're not using it
163 * any more. This is mainly for the benefit of programs which, like kexec,
164 * expect the hardware to be idle: not doing DMA or generating IRQs.
165 *
166 * This routine may be called in a damaged or failing kernel. Hence we
167 * do not acquire the spinlock before shutting down the controller.
168 */
uhci_hcd_grlib_shutdown(struct platform_device * op)169 static void uhci_hcd_grlib_shutdown(struct platform_device *op)
170 {
171 struct usb_hcd *hcd = platform_get_drvdata(op);
172
173 uhci_hc_died(hcd_to_uhci(hcd));
174 }
175
176 static const struct of_device_id uhci_hcd_grlib_of_match[] = {
177 { .name = "GAISLER_UHCI", },
178 { .name = "01_027", },
179 {},
180 };
181 MODULE_DEVICE_TABLE(of, uhci_hcd_grlib_of_match);
182
183
184 static struct platform_driver uhci_grlib_driver = {
185 .probe = uhci_hcd_grlib_probe,
186 .remove_new = uhci_hcd_grlib_remove,
187 .shutdown = uhci_hcd_grlib_shutdown,
188 .driver = {
189 .name = "grlib-uhci",
190 .of_match_table = uhci_hcd_grlib_of_match,
191 },
192 };
193