1 /*
2 * Driver for the Atmel USBA high speed USB device controller
3 *
4 * Copyright (C) 2005-2007 Atmel Corporation
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10 #ifndef __LINUX_USB_GADGET_USBA_UDC_H__
11 #define __LINUX_USB_GADGET_USBA_UDC_H__
12
13 /* USB register offsets */
14 #define USBA_CTRL 0x0000
15 #define USBA_FNUM 0x0004
16 #define USBA_INT_ENB 0x0010
17 #define USBA_INT_STA 0x0014
18 #define USBA_INT_CLR 0x0018
19 #define USBA_EPT_RST 0x001c
20 #define USBA_TST 0x00e0
21
22 /* USB endpoint register offsets */
23 #define USBA_EPT_CFG 0x0000
24 #define USBA_EPT_CTL_ENB 0x0004
25 #define USBA_EPT_CTL_DIS 0x0008
26 #define USBA_EPT_CTL 0x000c
27 #define USBA_EPT_SET_STA 0x0014
28 #define USBA_EPT_CLR_STA 0x0018
29 #define USBA_EPT_STA 0x001c
30
31 /* USB DMA register offsets */
32 #define USBA_DMA_NXT_DSC 0x0000
33 #define USBA_DMA_ADDRESS 0x0004
34 #define USBA_DMA_CONTROL 0x0008
35 #define USBA_DMA_STATUS 0x000c
36
37 /* Bitfields in CTRL */
38 #define USBA_DEV_ADDR_OFFSET 0
39 #define USBA_DEV_ADDR_SIZE 7
40 #define USBA_FADDR_EN (1 << 7)
41 #define USBA_EN_USBA (1 << 8)
42 #define USBA_DETACH (1 << 9)
43 #define USBA_REMOTE_WAKE_UP (1 << 10)
44 #define USBA_PULLD_DIS (1 << 11)
45
46 #if defined(CONFIG_AVR32)
47 #define USBA_ENABLE_MASK USBA_EN_USBA
48 #define USBA_DISABLE_MASK 0
49 #elif defined(CONFIG_ARCH_AT91)
50 #define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS)
51 #define USBA_DISABLE_MASK USBA_DETACH
52 #endif /* CONFIG_ARCH_AT91 */
53
54 /* Bitfields in FNUM */
55 #define USBA_MICRO_FRAME_NUM_OFFSET 0
56 #define USBA_MICRO_FRAME_NUM_SIZE 3
57 #define USBA_FRAME_NUMBER_OFFSET 3
58 #define USBA_FRAME_NUMBER_SIZE 11
59 #define USBA_FRAME_NUM_ERROR (1 << 31)
60
61 /* Bitfields in INT_ENB/INT_STA/INT_CLR */
62 #define USBA_HIGH_SPEED (1 << 0)
63 #define USBA_DET_SUSPEND (1 << 1)
64 #define USBA_MICRO_SOF (1 << 2)
65 #define USBA_SOF (1 << 3)
66 #define USBA_END_OF_RESET (1 << 4)
67 #define USBA_WAKE_UP (1 << 5)
68 #define USBA_END_OF_RESUME (1 << 6)
69 #define USBA_UPSTREAM_RESUME (1 << 7)
70 #define USBA_EPT_INT_OFFSET 8
71 #define USBA_EPT_INT_SIZE 16
72 #define USBA_DMA_INT_OFFSET 24
73 #define USBA_DMA_INT_SIZE 8
74
75 /* Bitfields in EPT_RST */
76 #define USBA_RST_OFFSET 0
77 #define USBA_RST_SIZE 16
78
79 /* Bitfields in USBA_TST */
80 #define USBA_SPEED_CFG_OFFSET 0
81 #define USBA_SPEED_CFG_SIZE 2
82 #define USBA_TST_J_MODE (1 << 2)
83 #define USBA_TST_K_MODE (1 << 3)
84 #define USBA_TST_PKT_MODE (1 << 4)
85 #define USBA_OPMODE2 (1 << 5)
86
87 /* Bitfields in EPT_CFG */
88 #define USBA_EPT_SIZE_OFFSET 0
89 #define USBA_EPT_SIZE_SIZE 3
90 #define USBA_EPT_DIR_IN (1 << 3)
91 #define USBA_EPT_TYPE_OFFSET 4
92 #define USBA_EPT_TYPE_SIZE 2
93 #define USBA_BK_NUMBER_OFFSET 6
94 #define USBA_BK_NUMBER_SIZE 2
95 #define USBA_NB_TRANS_OFFSET 8
96 #define USBA_NB_TRANS_SIZE 2
97 #define USBA_EPT_MAPPED (1 << 31)
98
99 /* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
100 #define USBA_EPT_ENABLE (1 << 0)
101 #define USBA_AUTO_VALID (1 << 1)
102 #define USBA_INTDIS_DMA (1 << 3)
103 #define USBA_NYET_DIS (1 << 4)
104 #define USBA_DATAX_RX (1 << 6)
105 #define USBA_MDATA_RX (1 << 7)
106 /* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
107 #define USBA_BUSY_BANK_IE (1 << 18)
108
109 /* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
110 #define USBA_FORCE_STALL (1 << 5)
111 #define USBA_TOGGLE_CLR (1 << 6)
112 #define USBA_TOGGLE_SEQ_OFFSET 6
113 #define USBA_TOGGLE_SEQ_SIZE 2
114 #define USBA_ERR_OVFLW (1 << 8)
115 #define USBA_RX_BK_RDY (1 << 9)
116 #define USBA_KILL_BANK (1 << 9)
117 #define USBA_TX_COMPLETE (1 << 10)
118 #define USBA_TX_PK_RDY (1 << 11)
119 #define USBA_ISO_ERR_TRANS (1 << 11)
120 #define USBA_RX_SETUP (1 << 12)
121 #define USBA_ISO_ERR_FLOW (1 << 12)
122 #define USBA_STALL_SENT (1 << 13)
123 #define USBA_ISO_ERR_CRC (1 << 13)
124 #define USBA_ISO_ERR_NBTRANS (1 << 13)
125 #define USBA_NAK_IN (1 << 14)
126 #define USBA_ISO_ERR_FLUSH (1 << 14)
127 #define USBA_NAK_OUT (1 << 15)
128 #define USBA_CURRENT_BANK_OFFSET 16
129 #define USBA_CURRENT_BANK_SIZE 2
130 #define USBA_BUSY_BANKS_OFFSET 18
131 #define USBA_BUSY_BANKS_SIZE 2
132 #define USBA_BYTE_COUNT_OFFSET 20
133 #define USBA_BYTE_COUNT_SIZE 11
134 #define USBA_SHORT_PACKET (1 << 31)
135
136 /* Bitfields in DMA_CONTROL */
137 #define USBA_DMA_CH_EN (1 << 0)
138 #define USBA_DMA_LINK (1 << 1)
139 #define USBA_DMA_END_TR_EN (1 << 2)
140 #define USBA_DMA_END_BUF_EN (1 << 3)
141 #define USBA_DMA_END_TR_IE (1 << 4)
142 #define USBA_DMA_END_BUF_IE (1 << 5)
143 #define USBA_DMA_DESC_LOAD_IE (1 << 6)
144 #define USBA_DMA_BURST_LOCK (1 << 7)
145 #define USBA_DMA_BUF_LEN_OFFSET 16
146 #define USBA_DMA_BUF_LEN_SIZE 16
147
148 /* Bitfields in DMA_STATUS */
149 #define USBA_DMA_CH_ACTIVE (1 << 1)
150 #define USBA_DMA_END_TR_ST (1 << 4)
151 #define USBA_DMA_END_BUF_ST (1 << 5)
152 #define USBA_DMA_DESC_LOAD_ST (1 << 6)
153
154 /* Constants for SPEED_CFG */
155 #define USBA_SPEED_CFG_NORMAL 0
156 #define USBA_SPEED_CFG_FORCE_HIGH 2
157 #define USBA_SPEED_CFG_FORCE_FULL 3
158
159 /* Constants for EPT_SIZE */
160 #define USBA_EPT_SIZE_8 0
161 #define USBA_EPT_SIZE_16 1
162 #define USBA_EPT_SIZE_32 2
163 #define USBA_EPT_SIZE_64 3
164 #define USBA_EPT_SIZE_128 4
165 #define USBA_EPT_SIZE_256 5
166 #define USBA_EPT_SIZE_512 6
167 #define USBA_EPT_SIZE_1024 7
168
169 /* Constants for EPT_TYPE */
170 #define USBA_EPT_TYPE_CONTROL 0
171 #define USBA_EPT_TYPE_ISO 1
172 #define USBA_EPT_TYPE_BULK 2
173 #define USBA_EPT_TYPE_INT 3
174
175 /* Constants for BK_NUMBER */
176 #define USBA_BK_NUMBER_ZERO 0
177 #define USBA_BK_NUMBER_ONE 1
178 #define USBA_BK_NUMBER_DOUBLE 2
179 #define USBA_BK_NUMBER_TRIPLE 3
180
181 /* Bit manipulation macros */
182 #define USBA_BF(name, value) \
183 (((value) & ((1 << USBA_##name##_SIZE) - 1)) \
184 << USBA_##name##_OFFSET)
185 #define USBA_BFEXT(name, value) \
186 (((value) >> USBA_##name##_OFFSET) \
187 & ((1 << USBA_##name##_SIZE) - 1))
188 #define USBA_BFINS(name, value, old) \
189 (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \
190 << USBA_##name##_OFFSET)) \
191 | USBA_BF(name, value))
192
193 /* Register access macros */
194 #define usba_readl(udc, reg) \
195 __raw_readl((udc)->regs + USBA_##reg)
196 #define usba_writel(udc, reg, value) \
197 __raw_writel((value), (udc)->regs + USBA_##reg)
198 #define usba_ep_readl(ep, reg) \
199 __raw_readl((ep)->ep_regs + USBA_EPT_##reg)
200 #define usba_ep_writel(ep, reg, value) \
201 __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
202 #define usba_dma_readl(ep, reg) \
203 __raw_readl((ep)->dma_regs + USBA_DMA_##reg)
204 #define usba_dma_writel(ep, reg, value) \
205 __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
206
207 /* Calculate base address for a given endpoint or DMA controller */
208 #define USBA_EPT_BASE(x) (0x100 + (x) * 0x20)
209 #define USBA_DMA_BASE(x) (0x300 + (x) * 0x10)
210 #define USBA_FIFO_BASE(x) ((x) << 16)
211
212 /* Synth parameters */
213 #define USBA_NR_ENDPOINTS 7
214
215 #define EP0_FIFO_SIZE 64
216 #define EP0_EPT_SIZE USBA_EPT_SIZE_64
217 #define EP0_NR_BANKS 1
218
219 /*
220 * REVISIT: Try to eliminate this value. Can we rely on req->mapped to
221 * provide this information?
222 */
223 #define DMA_ADDR_INVALID (~(dma_addr_t)0)
224
225 #define FIFO_IOMEM_ID 0
226 #define CTRL_IOMEM_ID 1
227
228 #define DBG_ERR 0x0001 /* report all error returns */
229 #define DBG_HW 0x0002 /* debug hardware initialization */
230 #define DBG_GADGET 0x0004 /* calls to/from gadget driver */
231 #define DBG_INT 0x0008 /* interrupts */
232 #define DBG_BUS 0x0010 /* report changes in bus state */
233 #define DBG_QUEUE 0x0020 /* debug request queue processing */
234 #define DBG_FIFO 0x0040 /* debug FIFO contents */
235 #define DBG_DMA 0x0080 /* debug DMA handling */
236 #define DBG_REQ 0x0100 /* print out queued request length */
237 #define DBG_ALL 0xffff
238 #define DBG_NONE 0x0000
239
240 #define DEBUG_LEVEL (DBG_ERR)
241
242 #define DBG(level, fmt, ...) \
243 do { \
244 if ((level) & DEBUG_LEVEL) \
245 pr_debug("udc: " fmt, ## __VA_ARGS__); \
246 } while (0)
247
248 enum usba_ctrl_state {
249 WAIT_FOR_SETUP,
250 DATA_STAGE_IN,
251 DATA_STAGE_OUT,
252 STATUS_STAGE_IN,
253 STATUS_STAGE_OUT,
254 STATUS_STAGE_ADDR,
255 STATUS_STAGE_TEST,
256 };
257 /*
258 EP_STATE_IDLE,
259 EP_STATE_SETUP,
260 EP_STATE_IN_DATA,
261 EP_STATE_OUT_DATA,
262 EP_STATE_SET_ADDR_STATUS,
263 EP_STATE_RX_STATUS,
264 EP_STATE_TX_STATUS,
265 EP_STATE_HALT,
266 */
267
268 struct usba_dma_desc {
269 dma_addr_t next;
270 dma_addr_t addr;
271 u32 ctrl;
272 };
273
274 struct usba_ep {
275 int state;
276 void __iomem *ep_regs;
277 void __iomem *dma_regs;
278 void __iomem *fifo;
279 struct usb_ep ep;
280 struct usba_udc *udc;
281
282 struct list_head queue;
283 const struct usb_endpoint_descriptor *desc;
284
285 u16 fifo_size;
286 u8 nr_banks;
287 u8 index;
288 unsigned int can_dma:1;
289 unsigned int can_isoc:1;
290 unsigned int is_isoc:1;
291 unsigned int is_in:1;
292
293 #ifdef CONFIG_USB_GADGET_DEBUG_FS
294 u32 last_dma_status;
295 struct dentry *debugfs_dir;
296 struct dentry *debugfs_queue;
297 struct dentry *debugfs_dma_status;
298 struct dentry *debugfs_state;
299 #endif
300 };
301
302 struct usba_request {
303 struct usb_request req;
304 struct list_head queue;
305
306 u32 ctrl;
307
308 unsigned int submitted:1;
309 unsigned int last_transaction:1;
310 unsigned int using_dma:1;
311 unsigned int mapped:1;
312 };
313
314 struct usba_udc {
315 /* Protect hw registers from concurrent modifications */
316 spinlock_t lock;
317
318 void __iomem *regs;
319 void __iomem *fifo;
320
321 struct usb_gadget gadget;
322 struct usb_gadget_driver *driver;
323 struct platform_device *pdev;
324 int irq;
325 int vbus_pin;
326 int vbus_pin_inverted;
327 struct clk *pclk;
328 struct clk *hclk;
329
330 u16 devstatus;
331
332 u16 test_mode;
333 int vbus_prev;
334
335 #ifdef CONFIG_USB_GADGET_DEBUG_FS
336 struct dentry *debugfs_root;
337 struct dentry *debugfs_regs;
338 #endif
339 };
340
to_usba_ep(struct usb_ep * ep)341 static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
342 {
343 return container_of(ep, struct usba_ep, ep);
344 }
345
to_usba_req(struct usb_request * req)346 static inline struct usba_request *to_usba_req(struct usb_request *req)
347 {
348 return container_of(req, struct usba_request, req);
349 }
350
to_usba_udc(struct usb_gadget * gadget)351 static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
352 {
353 return container_of(gadget, struct usba_udc, gadget);
354 }
355
356 #define ep_is_control(ep) ((ep)->index == 0)
357 #define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE)
358
359 #endif /* __LINUX_USB_GADGET_USBA_UDC_H */
360