1 /* $Date: 2005/10/24 23:18:13 $ $RCSfile: mv88e1xxx.c,v $ $Revision: 1.49 $ */
2 #include "common.h"
3 #include "mv88e1xxx.h"
4 #include "cphy.h"
5 #include "elmer0.h"
6
7 /* MV88E1XXX MDI crossover register values */
8 #define CROSSOVER_MDI 0
9 #define CROSSOVER_MDIX 1
10 #define CROSSOVER_AUTO 3
11
12 #define INTR_ENABLE_MASK 0x6CA0
13
14 /*
15 * Set the bits given by 'bitval' in PHY register 'reg'.
16 */
mdio_set_bit(struct cphy * cphy,int reg,u32 bitval)17 static void mdio_set_bit(struct cphy *cphy, int reg, u32 bitval)
18 {
19 u32 val;
20
21 (void) simple_mdio_read(cphy, reg, &val);
22 (void) simple_mdio_write(cphy, reg, val | bitval);
23 }
24
25 /*
26 * Clear the bits given by 'bitval' in PHY register 'reg'.
27 */
mdio_clear_bit(struct cphy * cphy,int reg,u32 bitval)28 static void mdio_clear_bit(struct cphy *cphy, int reg, u32 bitval)
29 {
30 u32 val;
31
32 (void) simple_mdio_read(cphy, reg, &val);
33 (void) simple_mdio_write(cphy, reg, val & ~bitval);
34 }
35
36 /*
37 * NAME: phy_reset
38 *
39 * DESC: Reset the given PHY's port. NOTE: This is not a global
40 * chip reset.
41 *
42 * PARAMS: cphy - Pointer to PHY instance data.
43 *
44 * RETURN: 0 - Successful reset.
45 * -1 - Timeout.
46 */
mv88e1xxx_reset(struct cphy * cphy,int wait)47 static int mv88e1xxx_reset(struct cphy *cphy, int wait)
48 {
49 u32 ctl;
50 int time_out = 1000;
51
52 mdio_set_bit(cphy, MII_BMCR, BMCR_RESET);
53
54 do {
55 (void) simple_mdio_read(cphy, MII_BMCR, &ctl);
56 ctl &= BMCR_RESET;
57 if (ctl)
58 udelay(1);
59 } while (ctl && --time_out);
60
61 return ctl ? -1 : 0;
62 }
63
mv88e1xxx_interrupt_enable(struct cphy * cphy)64 static int mv88e1xxx_interrupt_enable(struct cphy *cphy)
65 {
66 /* Enable PHY interrupts. */
67 (void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER,
68 INTR_ENABLE_MASK);
69
70 /* Enable Marvell interrupts through Elmer0. */
71 if (t1_is_asic(cphy->adapter)) {
72 u32 elmer;
73
74 t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
75 elmer |= ELMER0_GP_BIT1;
76 if (is_T2(cphy->adapter))
77 elmer |= ELMER0_GP_BIT2 | ELMER0_GP_BIT3 | ELMER0_GP_BIT4;
78 t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
79 }
80 return 0;
81 }
82
mv88e1xxx_interrupt_disable(struct cphy * cphy)83 static int mv88e1xxx_interrupt_disable(struct cphy *cphy)
84 {
85 /* Disable all phy interrupts. */
86 (void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER, 0);
87
88 /* Disable Marvell interrupts through Elmer0. */
89 if (t1_is_asic(cphy->adapter)) {
90 u32 elmer;
91
92 t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
93 elmer &= ~ELMER0_GP_BIT1;
94 if (is_T2(cphy->adapter))
95 elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
96 t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
97 }
98 return 0;
99 }
100
mv88e1xxx_interrupt_clear(struct cphy * cphy)101 static int mv88e1xxx_interrupt_clear(struct cphy *cphy)
102 {
103 u32 elmer;
104
105 /* Clear PHY interrupts by reading the register. */
106 (void) simple_mdio_read(cphy,
107 MV88E1XXX_INTERRUPT_STATUS_REGISTER, &elmer);
108
109 /* Clear Marvell interrupts through Elmer0. */
110 if (t1_is_asic(cphy->adapter)) {
111 t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
112 elmer |= ELMER0_GP_BIT1;
113 if (is_T2(cphy->adapter))
114 elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
115 t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
116 }
117 return 0;
118 }
119
120 /*
121 * Set the PHY speed and duplex. This also disables auto-negotiation, except
122 * for 1Gb/s, where auto-negotiation is mandatory.
123 */
mv88e1xxx_set_speed_duplex(struct cphy * phy,int speed,int duplex)124 static int mv88e1xxx_set_speed_duplex(struct cphy *phy, int speed, int duplex)
125 {
126 u32 ctl;
127
128 (void) simple_mdio_read(phy, MII_BMCR, &ctl);
129 if (speed >= 0) {
130 ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
131 if (speed == SPEED_100)
132 ctl |= BMCR_SPEED100;
133 else if (speed == SPEED_1000)
134 ctl |= BMCR_SPEED1000;
135 }
136 if (duplex >= 0) {
137 ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE);
138 if (duplex == DUPLEX_FULL)
139 ctl |= BMCR_FULLDPLX;
140 }
141 if (ctl & BMCR_SPEED1000) /* auto-negotiation required for 1Gb/s */
142 ctl |= BMCR_ANENABLE;
143 (void) simple_mdio_write(phy, MII_BMCR, ctl);
144 return 0;
145 }
146
mv88e1xxx_crossover_set(struct cphy * cphy,int crossover)147 static int mv88e1xxx_crossover_set(struct cphy *cphy, int crossover)
148 {
149 u32 data32;
150
151 (void) simple_mdio_read(cphy,
152 MV88E1XXX_SPECIFIC_CNTRL_REGISTER, &data32);
153 data32 &= ~V_PSCR_MDI_XOVER_MODE(M_PSCR_MDI_XOVER_MODE);
154 data32 |= V_PSCR_MDI_XOVER_MODE(crossover);
155 (void) simple_mdio_write(cphy,
156 MV88E1XXX_SPECIFIC_CNTRL_REGISTER, data32);
157 return 0;
158 }
159
mv88e1xxx_autoneg_enable(struct cphy * cphy)160 static int mv88e1xxx_autoneg_enable(struct cphy *cphy)
161 {
162 u32 ctl;
163
164 (void) mv88e1xxx_crossover_set(cphy, CROSSOVER_AUTO);
165
166 (void) simple_mdio_read(cphy, MII_BMCR, &ctl);
167 /* restart autoneg for change to take effect */
168 ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
169 (void) simple_mdio_write(cphy, MII_BMCR, ctl);
170 return 0;
171 }
172
mv88e1xxx_autoneg_disable(struct cphy * cphy)173 static int mv88e1xxx_autoneg_disable(struct cphy *cphy)
174 {
175 u32 ctl;
176
177 /*
178 * Crossover *must* be set to manual in order to disable auto-neg.
179 * The Alaska FAQs document highlights this point.
180 */
181 (void) mv88e1xxx_crossover_set(cphy, CROSSOVER_MDI);
182
183 /*
184 * Must include autoneg reset when disabling auto-neg. This
185 * is described in the Alaska FAQ document.
186 */
187 (void) simple_mdio_read(cphy, MII_BMCR, &ctl);
188 ctl &= ~BMCR_ANENABLE;
189 (void) simple_mdio_write(cphy, MII_BMCR, ctl | BMCR_ANRESTART);
190 return 0;
191 }
192
mv88e1xxx_autoneg_restart(struct cphy * cphy)193 static int mv88e1xxx_autoneg_restart(struct cphy *cphy)
194 {
195 mdio_set_bit(cphy, MII_BMCR, BMCR_ANRESTART);
196 return 0;
197 }
198
mv88e1xxx_advertise(struct cphy * phy,unsigned int advertise_map)199 static int mv88e1xxx_advertise(struct cphy *phy, unsigned int advertise_map)
200 {
201 u32 val = 0;
202
203 if (advertise_map &
204 (ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
205 (void) simple_mdio_read(phy, MII_GBCR, &val);
206 val &= ~(GBCR_ADV_1000HALF | GBCR_ADV_1000FULL);
207 if (advertise_map & ADVERTISED_1000baseT_Half)
208 val |= GBCR_ADV_1000HALF;
209 if (advertise_map & ADVERTISED_1000baseT_Full)
210 val |= GBCR_ADV_1000FULL;
211 }
212 (void) simple_mdio_write(phy, MII_GBCR, val);
213
214 val = 1;
215 if (advertise_map & ADVERTISED_10baseT_Half)
216 val |= ADVERTISE_10HALF;
217 if (advertise_map & ADVERTISED_10baseT_Full)
218 val |= ADVERTISE_10FULL;
219 if (advertise_map & ADVERTISED_100baseT_Half)
220 val |= ADVERTISE_100HALF;
221 if (advertise_map & ADVERTISED_100baseT_Full)
222 val |= ADVERTISE_100FULL;
223 if (advertise_map & ADVERTISED_PAUSE)
224 val |= ADVERTISE_PAUSE;
225 if (advertise_map & ADVERTISED_ASYM_PAUSE)
226 val |= ADVERTISE_PAUSE_ASYM;
227 (void) simple_mdio_write(phy, MII_ADVERTISE, val);
228 return 0;
229 }
230
mv88e1xxx_set_loopback(struct cphy * cphy,int on)231 static int mv88e1xxx_set_loopback(struct cphy *cphy, int on)
232 {
233 if (on)
234 mdio_set_bit(cphy, MII_BMCR, BMCR_LOOPBACK);
235 else
236 mdio_clear_bit(cphy, MII_BMCR, BMCR_LOOPBACK);
237 return 0;
238 }
239
mv88e1xxx_get_link_status(struct cphy * cphy,int * link_ok,int * speed,int * duplex,int * fc)240 static int mv88e1xxx_get_link_status(struct cphy *cphy, int *link_ok,
241 int *speed, int *duplex, int *fc)
242 {
243 u32 status;
244 int sp = -1, dplx = -1, pause = 0;
245
246 (void) simple_mdio_read(cphy,
247 MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
248 if ((status & V_PSSR_STATUS_RESOLVED) != 0) {
249 if (status & V_PSSR_RX_PAUSE)
250 pause |= PAUSE_RX;
251 if (status & V_PSSR_TX_PAUSE)
252 pause |= PAUSE_TX;
253 dplx = (status & V_PSSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
254 sp = G_PSSR_SPEED(status);
255 if (sp == 0)
256 sp = SPEED_10;
257 else if (sp == 1)
258 sp = SPEED_100;
259 else
260 sp = SPEED_1000;
261 }
262 if (link_ok)
263 *link_ok = (status & V_PSSR_LINK) != 0;
264 if (speed)
265 *speed = sp;
266 if (duplex)
267 *duplex = dplx;
268 if (fc)
269 *fc = pause;
270 return 0;
271 }
272
mv88e1xxx_downshift_set(struct cphy * cphy,int downshift_enable)273 static int mv88e1xxx_downshift_set(struct cphy *cphy, int downshift_enable)
274 {
275 u32 val;
276
277 (void) simple_mdio_read(cphy,
278 MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, &val);
279
280 /*
281 * Set the downshift counter to 2 so we try to establish Gb link
282 * twice before downshifting.
283 */
284 val &= ~(V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(M_DOWNSHIFT_CNT));
285
286 if (downshift_enable)
287 val |= V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(2);
288 (void) simple_mdio_write(cphy,
289 MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER, val);
290 return 0;
291 }
292
mv88e1xxx_interrupt_handler(struct cphy * cphy)293 static int mv88e1xxx_interrupt_handler(struct cphy *cphy)
294 {
295 int cphy_cause = 0;
296 u32 status;
297
298 /*
299 * Loop until cause reads zero. Need to handle bouncing interrupts.
300 */
301 while (1) {
302 u32 cause;
303
304 (void) simple_mdio_read(cphy,
305 MV88E1XXX_INTERRUPT_STATUS_REGISTER,
306 &cause);
307 cause &= INTR_ENABLE_MASK;
308 if (!cause)
309 break;
310
311 if (cause & MV88E1XXX_INTR_LINK_CHNG) {
312 (void) simple_mdio_read(cphy,
313 MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
314
315 if (status & MV88E1XXX_INTR_LINK_CHNG)
316 cphy->state |= PHY_LINK_UP;
317 else {
318 cphy->state &= ~PHY_LINK_UP;
319 if (cphy->state & PHY_AUTONEG_EN)
320 cphy->state &= ~PHY_AUTONEG_RDY;
321 cphy_cause |= cphy_cause_link_change;
322 }
323 }
324
325 if (cause & MV88E1XXX_INTR_AUTONEG_DONE)
326 cphy->state |= PHY_AUTONEG_RDY;
327
328 if ((cphy->state & (PHY_LINK_UP | PHY_AUTONEG_RDY)) ==
329 (PHY_LINK_UP | PHY_AUTONEG_RDY))
330 cphy_cause |= cphy_cause_link_change;
331 }
332 return cphy_cause;
333 }
334
mv88e1xxx_destroy(struct cphy * cphy)335 static void mv88e1xxx_destroy(struct cphy *cphy)
336 {
337 kfree(cphy);
338 }
339
340 static struct cphy_ops mv88e1xxx_ops = {
341 .destroy = mv88e1xxx_destroy,
342 .reset = mv88e1xxx_reset,
343 .interrupt_enable = mv88e1xxx_interrupt_enable,
344 .interrupt_disable = mv88e1xxx_interrupt_disable,
345 .interrupt_clear = mv88e1xxx_interrupt_clear,
346 .interrupt_handler = mv88e1xxx_interrupt_handler,
347 .autoneg_enable = mv88e1xxx_autoneg_enable,
348 .autoneg_disable = mv88e1xxx_autoneg_disable,
349 .autoneg_restart = mv88e1xxx_autoneg_restart,
350 .advertise = mv88e1xxx_advertise,
351 .set_loopback = mv88e1xxx_set_loopback,
352 .set_speed_duplex = mv88e1xxx_set_speed_duplex,
353 .get_link_status = mv88e1xxx_get_link_status,
354 };
355
mv88e1xxx_phy_create(struct net_device * dev,int phy_addr,const struct mdio_ops * mdio_ops)356 static struct cphy *mv88e1xxx_phy_create(struct net_device *dev, int phy_addr,
357 const struct mdio_ops *mdio_ops)
358 {
359 struct adapter *adapter = netdev_priv(dev);
360 struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
361
362 if (!cphy)
363 return NULL;
364
365 cphy_init(cphy, dev, phy_addr, &mv88e1xxx_ops, mdio_ops);
366
367 /* Configure particular PHY's to run in a different mode. */
368 if ((board_info(adapter)->caps & SUPPORTED_TP) &&
369 board_info(adapter)->chip_phy == CHBT_PHY_88E1111) {
370 /*
371 * Configure the PHY transmitter as class A to reduce EMI.
372 */
373 (void) simple_mdio_write(cphy,
374 MV88E1XXX_EXTENDED_ADDR_REGISTER, 0xB);
375 (void) simple_mdio_write(cphy,
376 MV88E1XXX_EXTENDED_REGISTER, 0x8004);
377 }
378 (void) mv88e1xxx_downshift_set(cphy, 1); /* Enable downshift */
379
380 /* LED */
381 if (is_T2(adapter)) {
382 (void) simple_mdio_write(cphy,
383 MV88E1XXX_LED_CONTROL_REGISTER, 0x1);
384 }
385
386 return cphy;
387 }
388
mv88e1xxx_phy_reset(adapter_t * adapter)389 static int mv88e1xxx_phy_reset(adapter_t* adapter)
390 {
391 return 0;
392 }
393
394 const struct gphy t1_mv88e1xxx_ops = {
395 .create = mv88e1xxx_phy_create,
396 .reset = mv88e1xxx_phy_reset
397 };
398