1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Universal Host Controller Interface driver for USB.
4 *
5 * Maintainer: Alan Stern <stern@rowland.harvard.edu>
6 *
7 * (C) Copyright 1999 Linus Torvalds
8 * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
9 * (C) Copyright 1999 Randy Dunlap
10 * (C) Copyright 1999 Georg Acher, acher@in.tum.de
11 * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
12 * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
13 * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
14 * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
15 * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
16 * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
17 * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
18 *
19 * Intel documents this fairly well, and as far as I know there
20 * are no royalties or anything like that, but even so there are
21 * people who decided that they want to do the same thing in a
22 * completely different way.
23 *
24 */
25
26 #include <linux/module.h>
27 #include <linux/pci.h>
28 #include <linux/kernel.h>
29 #include <linux/init.h>
30 #include <linux/delay.h>
31 #include <linux/ioport.h>
32 #include <linux/slab.h>
33 #include <linux/errno.h>
34 #include <linux/unistd.h>
35 #include <linux/interrupt.h>
36 #include <linux/spinlock.h>
37 #include <linux/debugfs.h>
38 #include <linux/pm.h>
39 #include <linux/dmapool.h>
40 #include <linux/dma-mapping.h>
41 #include <linux/usb.h>
42 #include <linux/usb/hcd.h>
43 #include <linux/bitops.h>
44 #include <linux/dmi.h>
45
46 #include <linux/uaccess.h>
47 #include <asm/io.h>
48 #include <asm/irq.h>
49
50 #include "uhci-hcd.h"
51
52 /*
53 * Version Information
54 */
55 #define DRIVER_AUTHOR \
56 "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, " \
57 "Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, " \
58 "Roman Weissgaerber, Alan Stern"
59 #define DRIVER_DESC "USB Universal Host Controller Interface driver"
60
61 /* for flakey hardware, ignore overcurrent indicators */
62 static bool ignore_oc;
63 module_param(ignore_oc, bool, S_IRUGO);
64 MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications");
65
66 /*
67 * debug = 0, no debugging messages
68 * debug = 1, dump failed URBs except for stalls
69 * debug = 2, dump all failed URBs (including stalls)
70 * show all queues in /sys/kernel/debug/uhci/[pci_addr]
71 * debug = 3, show all TDs in URBs when dumping
72 */
73 #ifdef CONFIG_DYNAMIC_DEBUG
74
75 static int debug = 1;
76 module_param(debug, int, S_IRUGO | S_IWUSR);
77 MODULE_PARM_DESC(debug, "Debug level");
78 static char *errbuf;
79
80 #else
81
82 #define debug 0
83 #define errbuf NULL
84
85 #endif
86
87
88 #define ERRBUF_LEN (32 * 1024)
89
90 static struct kmem_cache *uhci_up_cachep; /* urb_priv */
91
92 static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state);
93 static void wakeup_rh(struct uhci_hcd *uhci);
94 static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
95
96 /*
97 * Calculate the link pointer DMA value for the first Skeleton QH in a frame.
98 */
uhci_frame_skel_link(struct uhci_hcd * uhci,int frame)99 static __hc32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame)
100 {
101 int skelnum;
102
103 /*
104 * The interrupt queues will be interleaved as evenly as possible.
105 * There's not much to be done about period-1 interrupts; they have
106 * to occur in every frame. But we can schedule period-2 interrupts
107 * in odd-numbered frames, period-4 interrupts in frames congruent
108 * to 2 (mod 4), and so on. This way each frame only has two
109 * interrupt QHs, which will help spread out bandwidth utilization.
110 *
111 * ffs (Find First bit Set) does exactly what we need:
112 * 1,3,5,... => ffs = 0 => use period-2 QH = skelqh[8],
113 * 2,6,10,... => ffs = 1 => use period-4 QH = skelqh[7], etc.
114 * ffs >= 7 => not on any high-period queue, so use
115 * period-1 QH = skelqh[9].
116 * Add in UHCI_NUMFRAMES to insure at least one bit is set.
117 */
118 skelnum = 8 - (int) __ffs(frame | UHCI_NUMFRAMES);
119 if (skelnum <= 1)
120 skelnum = 9;
121 return LINK_TO_QH(uhci, uhci->skelqh[skelnum]);
122 }
123
124 #include "uhci-debug.c"
125 #include "uhci-q.c"
126 #include "uhci-hub.c"
127
128 /*
129 * Finish up a host controller reset and update the recorded state.
130 */
finish_reset(struct uhci_hcd * uhci)131 static void finish_reset(struct uhci_hcd *uhci)
132 {
133 int port;
134
135 /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
136 * bits in the port status and control registers.
137 * We have to clear them by hand.
138 */
139 for (port = 0; port < uhci->rh_numports; ++port)
140 uhci_writew(uhci, 0, USBPORTSC1 + (port * 2));
141
142 uhci->port_c_suspend = uhci->resuming_ports = 0;
143 uhci->rh_state = UHCI_RH_RESET;
144 uhci->is_stopped = UHCI_IS_STOPPED;
145 clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
146 }
147
148 /*
149 * Last rites for a defunct/nonfunctional controller
150 * or one we don't want to use any more.
151 */
uhci_hc_died(struct uhci_hcd * uhci)152 static void uhci_hc_died(struct uhci_hcd *uhci)
153 {
154 uhci_get_current_frame_number(uhci);
155 uhci->reset_hc(uhci);
156 finish_reset(uhci);
157 uhci->dead = 1;
158
159 /* The current frame may already be partway finished */
160 ++uhci->frame_number;
161 }
162
163 /*
164 * Initialize a controller that was newly discovered or has lost power
165 * or otherwise been reset while it was suspended. In none of these cases
166 * can we be sure of its previous state.
167 */
check_and_reset_hc(struct uhci_hcd * uhci)168 static void check_and_reset_hc(struct uhci_hcd *uhci)
169 {
170 if (uhci->check_and_reset_hc(uhci))
171 finish_reset(uhci);
172 }
173
174 #if defined(CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC)
175 /*
176 * The two functions below are generic reset functions that are used on systems
177 * that do not have keyboard and mouse legacy support. We assume that we are
178 * running on such a system if CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC is defined.
179 */
180
181 /*
182 * Make sure the controller is completely inactive, unable to
183 * generate interrupts or do DMA.
184 */
uhci_generic_reset_hc(struct uhci_hcd * uhci)185 static void uhci_generic_reset_hc(struct uhci_hcd *uhci)
186 {
187 /* Reset the HC - this will force us to get a
188 * new notification of any already connected
189 * ports due to the virtual disconnect that it
190 * implies.
191 */
192 uhci_writew(uhci, USBCMD_HCRESET, USBCMD);
193 mb();
194 udelay(5);
195 if (uhci_readw(uhci, USBCMD) & USBCMD_HCRESET)
196 dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n");
197
198 /* Just to be safe, disable interrupt requests and
199 * make sure the controller is stopped.
200 */
201 uhci_writew(uhci, 0, USBINTR);
202 uhci_writew(uhci, 0, USBCMD);
203 }
204
205 /*
206 * Initialize a controller that was newly discovered or has just been
207 * resumed. In either case we can't be sure of its previous state.
208 *
209 * Returns: 1 if the controller was reset, 0 otherwise.
210 */
uhci_generic_check_and_reset_hc(struct uhci_hcd * uhci)211 static int uhci_generic_check_and_reset_hc(struct uhci_hcd *uhci)
212 {
213 unsigned int cmd, intr;
214
215 /*
216 * When restarting a suspended controller, we expect all the
217 * settings to be the same as we left them:
218 *
219 * Controller is stopped and configured with EGSM set;
220 * No interrupts enabled except possibly Resume Detect.
221 *
222 * If any of these conditions are violated we do a complete reset.
223 */
224
225 cmd = uhci_readw(uhci, USBCMD);
226 if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) {
227 dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n",
228 __func__, cmd);
229 goto reset_needed;
230 }
231
232 intr = uhci_readw(uhci, USBINTR);
233 if (intr & (~USBINTR_RESUME)) {
234 dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n",
235 __func__, intr);
236 goto reset_needed;
237 }
238 return 0;
239
240 reset_needed:
241 dev_dbg(uhci_dev(uhci), "Performing full reset\n");
242 uhci_generic_reset_hc(uhci);
243 return 1;
244 }
245 #endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
246
247 /*
248 * Store the basic register settings needed by the controller.
249 */
configure_hc(struct uhci_hcd * uhci)250 static void configure_hc(struct uhci_hcd *uhci)
251 {
252 /* Set the frame length to the default: 1 ms exactly */
253 uhci_writeb(uhci, USBSOF_DEFAULT, USBSOF);
254
255 /* Store the frame list base address */
256 uhci_writel(uhci, uhci->frame_dma_handle, USBFLBASEADD);
257
258 /* Set the current frame number */
259 uhci_writew(uhci, uhci->frame_number & UHCI_MAX_SOF_NUMBER,
260 USBFRNUM);
261
262 /* perform any arch/bus specific configuration */
263 if (uhci->configure_hc)
264 uhci->configure_hc(uhci);
265 }
266
resume_detect_interrupts_are_broken(struct uhci_hcd * uhci)267 static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
268 {
269 /*
270 * If we have to ignore overcurrent events then almost by definition
271 * we can't depend on resume-detect interrupts.
272 *
273 * Those interrupts also don't seem to work on ASpeed SoCs.
274 */
275 if (ignore_oc || uhci_is_aspeed(uhci))
276 return 1;
277
278 return uhci->resume_detect_interrupts_are_broken ?
279 uhci->resume_detect_interrupts_are_broken(uhci) : 0;
280 }
281
global_suspend_mode_is_broken(struct uhci_hcd * uhci)282 static int global_suspend_mode_is_broken(struct uhci_hcd *uhci)
283 {
284 return uhci->global_suspend_mode_is_broken ?
285 uhci->global_suspend_mode_is_broken(uhci) : 0;
286 }
287
suspend_rh(struct uhci_hcd * uhci,enum uhci_rh_state new_state)288 static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state)
289 __releases(uhci->lock)
290 __acquires(uhci->lock)
291 {
292 int auto_stop;
293 int int_enable, egsm_enable, wakeup_enable;
294 struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub;
295
296 auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
297 dev_dbg(&rhdev->dev, "%s%s\n", __func__,
298 (auto_stop ? " (auto-stop)" : ""));
299
300 /* Start off by assuming Resume-Detect interrupts and EGSM work
301 * and that remote wakeups should be enabled.
302 */
303 egsm_enable = USBCMD_EGSM;
304 int_enable = USBINTR_RESUME;
305 wakeup_enable = 1;
306
307 /*
308 * In auto-stop mode, we must be able to detect new connections.
309 * The user can force us to poll by disabling remote wakeup;
310 * otherwise we will use the EGSM/RD mechanism.
311 */
312 if (auto_stop) {
313 if (!device_may_wakeup(&rhdev->dev))
314 egsm_enable = int_enable = 0;
315 }
316
317 #ifdef CONFIG_PM
318 /*
319 * In bus-suspend mode, we use the wakeup setting specified
320 * for the root hub.
321 */
322 else {
323 if (!rhdev->do_remote_wakeup)
324 wakeup_enable = 0;
325 }
326 #endif
327
328 /*
329 * UHCI doesn't distinguish between wakeup requests from downstream
330 * devices and local connect/disconnect events. There's no way to
331 * enable one without the other; both are controlled by EGSM. Thus
332 * if wakeups are disallowed then EGSM must be turned off -- in which
333 * case remote wakeup requests from downstream during system sleep
334 * will be lost.
335 *
336 * In addition, if EGSM is broken then we can't use it. Likewise,
337 * if Resume-Detect interrupts are broken then we can't use them.
338 *
339 * Finally, neither EGSM nor RD is useful by itself. Without EGSM,
340 * the RD status bit will never get set. Without RD, the controller
341 * won't generate interrupts to tell the system about wakeup events.
342 */
343 if (!wakeup_enable || global_suspend_mode_is_broken(uhci) ||
344 resume_detect_interrupts_are_broken(uhci))
345 egsm_enable = int_enable = 0;
346
347 uhci->RD_enable = !!int_enable;
348 uhci_writew(uhci, int_enable, USBINTR);
349 uhci_writew(uhci, egsm_enable | USBCMD_CF, USBCMD);
350 mb();
351 udelay(5);
352
353 /* If we're auto-stopping then no devices have been attached
354 * for a while, so there shouldn't be any active URBs and the
355 * controller should stop after a few microseconds. Otherwise
356 * we will give the controller one frame to stop.
357 */
358 if (!auto_stop && !(uhci_readw(uhci, USBSTS) & USBSTS_HCH)) {
359 uhci->rh_state = UHCI_RH_SUSPENDING;
360 spin_unlock_irq(&uhci->lock);
361 msleep(1);
362 spin_lock_irq(&uhci->lock);
363 if (uhci->dead)
364 return;
365 }
366 if (!(uhci_readw(uhci, USBSTS) & USBSTS_HCH))
367 dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
368
369 uhci_get_current_frame_number(uhci);
370
371 uhci->rh_state = new_state;
372 uhci->is_stopped = UHCI_IS_STOPPED;
373
374 /*
375 * If remote wakeup is enabled but either EGSM or RD interrupts
376 * doesn't work, then we won't get an interrupt when a wakeup event
377 * occurs. Thus the suspended root hub needs to be polled.
378 */
379 if (wakeup_enable && (!int_enable || !egsm_enable))
380 set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
381 else
382 clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
383
384 uhci_scan_schedule(uhci);
385 uhci_fsbr_off(uhci);
386 }
387
start_rh(struct uhci_hcd * uhci)388 static void start_rh(struct uhci_hcd *uhci)
389 {
390 uhci->is_stopped = 0;
391
392 /*
393 * Clear stale status bits on Aspeed as we get a stale HCH
394 * which causes problems later on
395 */
396 if (uhci_is_aspeed(uhci))
397 uhci_writew(uhci, uhci_readw(uhci, USBSTS), USBSTS);
398
399 /* Mark it configured and running with a 64-byte max packet.
400 * All interrupts are enabled, even though RESUME won't do anything.
401 */
402 uhci_writew(uhci, USBCMD_RS | USBCMD_CF | USBCMD_MAXP, USBCMD);
403 uhci_writew(uhci, USBINTR_TIMEOUT | USBINTR_RESUME |
404 USBINTR_IOC | USBINTR_SP, USBINTR);
405 mb();
406 uhci->rh_state = UHCI_RH_RUNNING;
407 set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
408 }
409
wakeup_rh(struct uhci_hcd * uhci)410 static void wakeup_rh(struct uhci_hcd *uhci)
411 __releases(uhci->lock)
412 __acquires(uhci->lock)
413 {
414 dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
415 "%s%s\n", __func__,
416 uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
417 " (auto-start)" : "");
418
419 /* If we are auto-stopped then no devices are attached so there's
420 * no need for wakeup signals. Otherwise we send Global Resume
421 * for 20 ms.
422 */
423 if (uhci->rh_state == UHCI_RH_SUSPENDED) {
424 unsigned egsm;
425
426 /* Keep EGSM on if it was set before */
427 egsm = uhci_readw(uhci, USBCMD) & USBCMD_EGSM;
428 uhci->rh_state = UHCI_RH_RESUMING;
429 uhci_writew(uhci, USBCMD_FGR | USBCMD_CF | egsm, USBCMD);
430 spin_unlock_irq(&uhci->lock);
431 msleep(20);
432 spin_lock_irq(&uhci->lock);
433 if (uhci->dead)
434 return;
435
436 /* End Global Resume and wait for EOP to be sent */
437 uhci_writew(uhci, USBCMD_CF, USBCMD);
438 mb();
439 udelay(4);
440 if (uhci_readw(uhci, USBCMD) & USBCMD_FGR)
441 dev_warn(uhci_dev(uhci), "FGR not stopped yet!\n");
442 }
443
444 start_rh(uhci);
445
446 /* Restart root hub polling */
447 mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
448 }
449
uhci_irq(struct usb_hcd * hcd)450 static irqreturn_t uhci_irq(struct usb_hcd *hcd)
451 {
452 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
453 unsigned short status;
454
455 /*
456 * Read the interrupt status, and write it back to clear the
457 * interrupt cause. Contrary to the UHCI specification, the
458 * "HC Halted" status bit is persistent: it is RO, not R/WC.
459 */
460 status = uhci_readw(uhci, USBSTS);
461 if (!(status & ~USBSTS_HCH)) /* shared interrupt, not mine */
462 return IRQ_NONE;
463 uhci_writew(uhci, status, USBSTS); /* Clear it */
464
465 spin_lock(&uhci->lock);
466 if (unlikely(!uhci->is_initialized)) /* not yet configured */
467 goto done;
468
469 if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
470 if (status & USBSTS_HSE)
471 dev_err(uhci_dev(uhci),
472 "host system error, PCI problems?\n");
473 if (status & USBSTS_HCPE)
474 dev_err(uhci_dev(uhci),
475 "host controller process error, something bad happened!\n");
476 if (status & USBSTS_HCH) {
477 if (uhci->rh_state >= UHCI_RH_RUNNING) {
478 dev_err(uhci_dev(uhci),
479 "host controller halted, very bad!\n");
480 if (debug > 1 && errbuf) {
481 /* Print the schedule for debugging */
482 uhci_sprint_schedule(uhci, errbuf,
483 ERRBUF_LEN - EXTRA_SPACE);
484 lprintk(errbuf);
485 }
486 uhci_hc_died(uhci);
487 usb_hc_died(hcd);
488
489 /* Force a callback in case there are
490 * pending unlinks */
491 mod_timer(&hcd->rh_timer, jiffies);
492 }
493 }
494 }
495
496 if (status & USBSTS_RD) {
497 spin_unlock(&uhci->lock);
498 usb_hcd_poll_rh_status(hcd);
499 } else {
500 uhci_scan_schedule(uhci);
501 done:
502 spin_unlock(&uhci->lock);
503 }
504
505 return IRQ_HANDLED;
506 }
507
508 /*
509 * Store the current frame number in uhci->frame_number if the controller
510 * is running. Expand from 11 bits (of which we use only 10) to a
511 * full-sized integer.
512 *
513 * Like many other parts of the driver, this code relies on being polled
514 * more than once per second as long as the controller is running.
515 */
uhci_get_current_frame_number(struct uhci_hcd * uhci)516 static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
517 {
518 if (!uhci->is_stopped) {
519 unsigned delta;
520
521 delta = (uhci_readw(uhci, USBFRNUM) - uhci->frame_number) &
522 (UHCI_NUMFRAMES - 1);
523 uhci->frame_number += delta;
524 }
525 }
526
527 /*
528 * De-allocate all resources
529 */
release_uhci(struct uhci_hcd * uhci)530 static void release_uhci(struct uhci_hcd *uhci)
531 {
532 int i;
533
534
535 spin_lock_irq(&uhci->lock);
536 uhci->is_initialized = 0;
537 spin_unlock_irq(&uhci->lock);
538
539 debugfs_remove(debugfs_lookup(uhci_to_hcd(uhci)->self.bus_name,
540 uhci_debugfs_root));
541
542 for (i = 0; i < UHCI_NUM_SKELQH; i++)
543 uhci_free_qh(uhci, uhci->skelqh[i]);
544
545 uhci_free_td(uhci, uhci->term_td);
546
547 dma_pool_destroy(uhci->qh_pool);
548
549 dma_pool_destroy(uhci->td_pool);
550
551 kfree(uhci->frame_cpu);
552
553 dma_free_coherent(uhci_dev(uhci),
554 UHCI_NUMFRAMES * sizeof(*uhci->frame),
555 uhci->frame, uhci->frame_dma_handle);
556 }
557
558 /*
559 * Allocate a frame list, and then setup the skeleton
560 *
561 * The hardware doesn't really know any difference
562 * in the queues, but the order does matter for the
563 * protocols higher up. The order in which the queues
564 * are encountered by the hardware is:
565 *
566 * - All isochronous events are handled before any
567 * of the queues. We don't do that here, because
568 * we'll create the actual TD entries on demand.
569 * - The first queue is the high-period interrupt queue.
570 * - The second queue is the period-1 interrupt and async
571 * (low-speed control, full-speed control, then bulk) queue.
572 * - The third queue is the terminating bandwidth reclamation queue,
573 * which contains no members, loops back to itself, and is present
574 * only when FSBR is on and there are no full-speed control or bulk QHs.
575 */
uhci_start(struct usb_hcd * hcd)576 static int uhci_start(struct usb_hcd *hcd)
577 {
578 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
579 int retval = -EBUSY;
580 int i;
581
582 hcd->uses_new_polling = 1;
583 /* Accept arbitrarily long scatter-gather lists */
584 if (!hcd->localmem_pool)
585 hcd->self.sg_tablesize = ~0;
586
587 spin_lock_init(&uhci->lock);
588 timer_setup(&uhci->fsbr_timer, uhci_fsbr_timeout, 0);
589 INIT_LIST_HEAD(&uhci->idle_qh_list);
590 init_waitqueue_head(&uhci->waitqh);
591
592 #ifdef UHCI_DEBUG_OPS
593 debugfs_create_file(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR,
594 uhci_debugfs_root, uhci, &uhci_debug_operations);
595 #endif
596
597 uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
598 UHCI_NUMFRAMES * sizeof(*uhci->frame),
599 &uhci->frame_dma_handle, GFP_KERNEL);
600 if (!uhci->frame) {
601 dev_err(uhci_dev(uhci),
602 "unable to allocate consistent memory for frame list\n");
603 goto err_alloc_frame;
604 }
605
606 uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
607 GFP_KERNEL);
608 if (!uhci->frame_cpu)
609 goto err_alloc_frame_cpu;
610
611 uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
612 sizeof(struct uhci_td), 16, 0);
613 if (!uhci->td_pool) {
614 dev_err(uhci_dev(uhci), "unable to create td dma_pool\n");
615 goto err_create_td_pool;
616 }
617
618 uhci->qh_pool = dma_pool_create("uhci_qh", uhci_dev(uhci),
619 sizeof(struct uhci_qh), 16, 0);
620 if (!uhci->qh_pool) {
621 dev_err(uhci_dev(uhci), "unable to create qh dma_pool\n");
622 goto err_create_qh_pool;
623 }
624
625 uhci->term_td = uhci_alloc_td(uhci);
626 if (!uhci->term_td) {
627 dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n");
628 goto err_alloc_term_td;
629 }
630
631 for (i = 0; i < UHCI_NUM_SKELQH; i++) {
632 uhci->skelqh[i] = uhci_alloc_qh(uhci, NULL, NULL);
633 if (!uhci->skelqh[i]) {
634 dev_err(uhci_dev(uhci), "unable to allocate QH\n");
635 goto err_alloc_skelqh;
636 }
637 }
638
639 /*
640 * 8 Interrupt queues; link all higher int queues to int1 = async
641 */
642 for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i)
643 uhci->skelqh[i]->link = LINK_TO_QH(uhci, uhci->skel_async_qh);
644 uhci->skel_async_qh->link = UHCI_PTR_TERM(uhci);
645 uhci->skel_term_qh->link = LINK_TO_QH(uhci, uhci->skel_term_qh);
646
647 /* This dummy TD is to work around a bug in Intel PIIX controllers */
648 uhci_fill_td(uhci, uhci->term_td, 0, uhci_explen(0) |
649 (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
650 uhci->term_td->link = UHCI_PTR_TERM(uhci);
651 uhci->skel_async_qh->element = uhci->skel_term_qh->element =
652 LINK_TO_TD(uhci, uhci->term_td);
653
654 /*
655 * Fill the frame list: make all entries point to the proper
656 * interrupt queue.
657 */
658 for (i = 0; i < UHCI_NUMFRAMES; i++) {
659
660 /* Only place we don't use the frame list routines */
661 uhci->frame[i] = uhci_frame_skel_link(uhci, i);
662 }
663
664 /*
665 * Some architectures require a full mb() to enforce completion of
666 * the memory writes above before the I/O transfers in configure_hc().
667 */
668 mb();
669
670 spin_lock_irq(&uhci->lock);
671 configure_hc(uhci);
672 uhci->is_initialized = 1;
673 start_rh(uhci);
674 spin_unlock_irq(&uhci->lock);
675 return 0;
676
677 /*
678 * error exits:
679 */
680 err_alloc_skelqh:
681 for (i = 0; i < UHCI_NUM_SKELQH; i++) {
682 if (uhci->skelqh[i])
683 uhci_free_qh(uhci, uhci->skelqh[i]);
684 }
685
686 uhci_free_td(uhci, uhci->term_td);
687
688 err_alloc_term_td:
689 dma_pool_destroy(uhci->qh_pool);
690
691 err_create_qh_pool:
692 dma_pool_destroy(uhci->td_pool);
693
694 err_create_td_pool:
695 kfree(uhci->frame_cpu);
696
697 err_alloc_frame_cpu:
698 dma_free_coherent(uhci_dev(uhci),
699 UHCI_NUMFRAMES * sizeof(*uhci->frame),
700 uhci->frame, uhci->frame_dma_handle);
701
702 err_alloc_frame:
703 debugfs_remove(debugfs_lookup(hcd->self.bus_name, uhci_debugfs_root));
704
705 return retval;
706 }
707
uhci_stop(struct usb_hcd * hcd)708 static void uhci_stop(struct usb_hcd *hcd)
709 {
710 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
711
712 spin_lock_irq(&uhci->lock);
713 if (HCD_HW_ACCESSIBLE(hcd) && !uhci->dead)
714 uhci_hc_died(uhci);
715 uhci_scan_schedule(uhci);
716 spin_unlock_irq(&uhci->lock);
717 synchronize_irq(hcd->irq);
718
719 del_timer_sync(&uhci->fsbr_timer);
720 release_uhci(uhci);
721 }
722
723 #ifdef CONFIG_PM
uhci_rh_suspend(struct usb_hcd * hcd)724 static int uhci_rh_suspend(struct usb_hcd *hcd)
725 {
726 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
727 int rc = 0;
728
729 spin_lock_irq(&uhci->lock);
730 if (!HCD_HW_ACCESSIBLE(hcd))
731 rc = -ESHUTDOWN;
732 else if (uhci->dead)
733 ; /* Dead controllers tell no tales */
734
735 /* Once the controller is stopped, port resumes that are already
736 * in progress won't complete. Hence if remote wakeup is enabled
737 * for the root hub and any ports are in the middle of a resume or
738 * remote wakeup, we must fail the suspend.
739 */
740 else if (hcd->self.root_hub->do_remote_wakeup &&
741 uhci->resuming_ports) {
742 dev_dbg(uhci_dev(uhci),
743 "suspend failed because a port is resuming\n");
744 rc = -EBUSY;
745 } else
746 suspend_rh(uhci, UHCI_RH_SUSPENDED);
747 spin_unlock_irq(&uhci->lock);
748 return rc;
749 }
750
uhci_rh_resume(struct usb_hcd * hcd)751 static int uhci_rh_resume(struct usb_hcd *hcd)
752 {
753 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
754 int rc = 0;
755
756 spin_lock_irq(&uhci->lock);
757 if (!HCD_HW_ACCESSIBLE(hcd))
758 rc = -ESHUTDOWN;
759 else if (!uhci->dead)
760 wakeup_rh(uhci);
761 spin_unlock_irq(&uhci->lock);
762 return rc;
763 }
764
765 #endif
766
767 /* Wait until a particular device/endpoint's QH is idle, and free it */
uhci_hcd_endpoint_disable(struct usb_hcd * hcd,struct usb_host_endpoint * hep)768 static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
769 struct usb_host_endpoint *hep)
770 {
771 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
772 struct uhci_qh *qh;
773
774 spin_lock_irq(&uhci->lock);
775 qh = (struct uhci_qh *) hep->hcpriv;
776 if (qh == NULL)
777 goto done;
778
779 while (qh->state != QH_STATE_IDLE) {
780 ++uhci->num_waiting;
781 spin_unlock_irq(&uhci->lock);
782 wait_event_interruptible(uhci->waitqh,
783 qh->state == QH_STATE_IDLE);
784 spin_lock_irq(&uhci->lock);
785 --uhci->num_waiting;
786 }
787
788 uhci_free_qh(uhci, qh);
789 done:
790 spin_unlock_irq(&uhci->lock);
791 }
792
uhci_hcd_get_frame_number(struct usb_hcd * hcd)793 static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
794 {
795 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
796 unsigned frame_number;
797 unsigned delta;
798
799 /* Minimize latency by avoiding the spinlock */
800 frame_number = uhci->frame_number;
801 barrier();
802 delta = (uhci_readw(uhci, USBFRNUM) - frame_number) &
803 (UHCI_NUMFRAMES - 1);
804 return frame_number + delta;
805 }
806
807 /* Determines number of ports on controller */
uhci_count_ports(struct usb_hcd * hcd)808 static int uhci_count_ports(struct usb_hcd *hcd)
809 {
810 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
811 unsigned io_size = (unsigned) hcd->rsrc_len;
812 int port;
813
814 /* The UHCI spec says devices must have 2 ports, and goes on to say
815 * they may have more but gives no way to determine how many there
816 * are. However according to the UHCI spec, Bit 7 of the port
817 * status and control register is always set to 1. So we try to
818 * use this to our advantage. Another common failure mode when
819 * a nonexistent register is addressed is to return all ones, so
820 * we test for that also.
821 */
822 for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
823 unsigned int portstatus;
824
825 portstatus = uhci_readw(uhci, USBPORTSC1 + (port * 2));
826 if (!(portstatus & 0x0080) || portstatus == 0xffff)
827 break;
828 }
829 if (debug)
830 dev_info(uhci_dev(uhci), "detected %d ports\n", port);
831
832 /* Anything greater than 7 is weird so we'll ignore it. */
833 if (port > UHCI_RH_MAXCHILD) {
834 dev_info(uhci_dev(uhci),
835 "port count misdetected? forcing to 2 ports\n");
836 port = 2;
837 }
838
839 return port;
840 }
841
842 static const char hcd_name[] = "uhci_hcd";
843
844 #ifdef CONFIG_USB_PCI
845 #include "uhci-pci.c"
846 #define PCI_DRIVER uhci_pci_driver
847 #endif
848
849 #ifdef CONFIG_SPARC_LEON
850 #include "uhci-grlib.c"
851 #define PLATFORM_DRIVER uhci_grlib_driver
852 #endif
853
854 #ifdef CONFIG_USB_UHCI_PLATFORM
855 #include "uhci-platform.c"
856 #define PLATFORM_DRIVER uhci_platform_driver
857 #endif
858
859 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
860 #error "missing bus glue for uhci-hcd"
861 #endif
862
uhci_hcd_init(void)863 static int __init uhci_hcd_init(void)
864 {
865 int retval = -ENOMEM;
866
867 if (usb_disabled())
868 return -ENODEV;
869
870 printk(KERN_INFO "uhci_hcd: " DRIVER_DESC "%s\n",
871 ignore_oc ? ", overcurrent ignored" : "");
872 set_bit(USB_UHCI_LOADED, &usb_hcds_loaded);
873
874 #ifdef CONFIG_DYNAMIC_DEBUG
875 errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
876 if (!errbuf)
877 goto errbuf_failed;
878 uhci_debugfs_root = debugfs_create_dir("uhci", usb_debug_root);
879 #endif
880
881 uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
882 sizeof(struct urb_priv), 0, 0, NULL);
883 if (!uhci_up_cachep)
884 goto up_failed;
885
886 #ifdef PLATFORM_DRIVER
887 retval = platform_driver_register(&PLATFORM_DRIVER);
888 if (retval < 0)
889 goto clean0;
890 #endif
891
892 #ifdef PCI_DRIVER
893 retval = pci_register_driver(&PCI_DRIVER);
894 if (retval < 0)
895 goto clean1;
896 #endif
897
898 return 0;
899
900 #ifdef PCI_DRIVER
901 clean1:
902 #endif
903 #ifdef PLATFORM_DRIVER
904 platform_driver_unregister(&PLATFORM_DRIVER);
905 clean0:
906 #endif
907 kmem_cache_destroy(uhci_up_cachep);
908
909 up_failed:
910 #if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
911 debugfs_remove(uhci_debugfs_root);
912
913 kfree(errbuf);
914
915 errbuf_failed:
916 #endif
917
918 clear_bit(USB_UHCI_LOADED, &usb_hcds_loaded);
919 return retval;
920 }
921
uhci_hcd_cleanup(void)922 static void __exit uhci_hcd_cleanup(void)
923 {
924 #ifdef PLATFORM_DRIVER
925 platform_driver_unregister(&PLATFORM_DRIVER);
926 #endif
927 #ifdef PCI_DRIVER
928 pci_unregister_driver(&PCI_DRIVER);
929 #endif
930 kmem_cache_destroy(uhci_up_cachep);
931 debugfs_remove(uhci_debugfs_root);
932 #ifdef CONFIG_DYNAMIC_DEBUG
933 kfree(errbuf);
934 #endif
935 clear_bit(USB_UHCI_LOADED, &usb_hcds_loaded);
936 }
937
938 module_init(uhci_hcd_init);
939 module_exit(uhci_hcd_cleanup);
940
941 MODULE_AUTHOR(DRIVER_AUTHOR);
942 MODULE_DESCRIPTION(DRIVER_DESC);
943 MODULE_LICENSE("GPL");
944