1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * ST Microelectronics MFD: stmpe's driver
4 *
5 * Copyright (C) ST-Ericsson SA 2010
6 *
7 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
8 */
9
10 #include <linux/err.h>
11 #include <linux/gpio.h>
12 #include <linux/export.h>
13 #include <linux/kernel.h>
14 #include <linux/interrupt.h>
15 #include <linux/irq.h>
16 #include <linux/irqdomain.h>
17 #include <linux/of.h>
18 #include <linux/of_gpio.h>
19 #include <linux/pm.h>
20 #include <linux/slab.h>
21 #include <linux/mfd/core.h>
22 #include <linux/delay.h>
23 #include <linux/regulator/consumer.h>
24 #include "stmpe.h"
25
26 /**
27 * struct stmpe_platform_data - STMPE platform data
28 * @id: device id to distinguish between multiple STMPEs on the same board
29 * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
30 * @irq_trigger: IRQ trigger to use for the interrupt to the host
31 * @autosleep: bool to enable/disable stmpe autosleep
32 * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
33 * @irq_over_gpio: true if gpio is used to get irq
34 * @irq_gpio: gpio number over which irq will be requested (significant only if
35 * irq_over_gpio is true)
36 */
37 struct stmpe_platform_data {
38 int id;
39 unsigned int blocks;
40 unsigned int irq_trigger;
41 bool autosleep;
42 bool irq_over_gpio;
43 int irq_gpio;
44 int autosleep_timeout;
45 };
46
__stmpe_enable(struct stmpe * stmpe,unsigned int blocks)47 static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
48 {
49 return stmpe->variant->enable(stmpe, blocks, true);
50 }
51
__stmpe_disable(struct stmpe * stmpe,unsigned int blocks)52 static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
53 {
54 return stmpe->variant->enable(stmpe, blocks, false);
55 }
56
__stmpe_reg_read(struct stmpe * stmpe,u8 reg)57 static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
58 {
59 int ret;
60
61 ret = stmpe->ci->read_byte(stmpe, reg);
62 if (ret < 0)
63 dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret);
64
65 dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
66
67 return ret;
68 }
69
__stmpe_reg_write(struct stmpe * stmpe,u8 reg,u8 val)70 static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
71 {
72 int ret;
73
74 dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
75
76 ret = stmpe->ci->write_byte(stmpe, reg, val);
77 if (ret < 0)
78 dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret);
79
80 return ret;
81 }
82
__stmpe_set_bits(struct stmpe * stmpe,u8 reg,u8 mask,u8 val)83 static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
84 {
85 int ret;
86
87 ret = __stmpe_reg_read(stmpe, reg);
88 if (ret < 0)
89 return ret;
90
91 ret &= ~mask;
92 ret |= val;
93
94 return __stmpe_reg_write(stmpe, reg, ret);
95 }
96
__stmpe_block_read(struct stmpe * stmpe,u8 reg,u8 length,u8 * values)97 static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
98 u8 *values)
99 {
100 int ret;
101
102 ret = stmpe->ci->read_block(stmpe, reg, length, values);
103 if (ret < 0)
104 dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret);
105
106 dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
107 stmpe_dump_bytes("stmpe rd: ", values, length);
108
109 return ret;
110 }
111
__stmpe_block_write(struct stmpe * stmpe,u8 reg,u8 length,const u8 * values)112 static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
113 const u8 *values)
114 {
115 int ret;
116
117 dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
118 stmpe_dump_bytes("stmpe wr: ", values, length);
119
120 ret = stmpe->ci->write_block(stmpe, reg, length, values);
121 if (ret < 0)
122 dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret);
123
124 return ret;
125 }
126
127 /**
128 * stmpe_enable - enable blocks on an STMPE device
129 * @stmpe: Device to work on
130 * @blocks: Mask of blocks (enum stmpe_block values) to enable
131 */
stmpe_enable(struct stmpe * stmpe,unsigned int blocks)132 int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
133 {
134 int ret;
135
136 mutex_lock(&stmpe->lock);
137 ret = __stmpe_enable(stmpe, blocks);
138 mutex_unlock(&stmpe->lock);
139
140 return ret;
141 }
142 EXPORT_SYMBOL_GPL(stmpe_enable);
143
144 /**
145 * stmpe_disable - disable blocks on an STMPE device
146 * @stmpe: Device to work on
147 * @blocks: Mask of blocks (enum stmpe_block values) to enable
148 */
stmpe_disable(struct stmpe * stmpe,unsigned int blocks)149 int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
150 {
151 int ret;
152
153 mutex_lock(&stmpe->lock);
154 ret = __stmpe_disable(stmpe, blocks);
155 mutex_unlock(&stmpe->lock);
156
157 return ret;
158 }
159 EXPORT_SYMBOL_GPL(stmpe_disable);
160
161 /**
162 * stmpe_reg_read() - read a single STMPE register
163 * @stmpe: Device to read from
164 * @reg: Register to read
165 */
stmpe_reg_read(struct stmpe * stmpe,u8 reg)166 int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
167 {
168 int ret;
169
170 mutex_lock(&stmpe->lock);
171 ret = __stmpe_reg_read(stmpe, reg);
172 mutex_unlock(&stmpe->lock);
173
174 return ret;
175 }
176 EXPORT_SYMBOL_GPL(stmpe_reg_read);
177
178 /**
179 * stmpe_reg_write() - write a single STMPE register
180 * @stmpe: Device to write to
181 * @reg: Register to write
182 * @val: Value to write
183 */
stmpe_reg_write(struct stmpe * stmpe,u8 reg,u8 val)184 int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
185 {
186 int ret;
187
188 mutex_lock(&stmpe->lock);
189 ret = __stmpe_reg_write(stmpe, reg, val);
190 mutex_unlock(&stmpe->lock);
191
192 return ret;
193 }
194 EXPORT_SYMBOL_GPL(stmpe_reg_write);
195
196 /**
197 * stmpe_set_bits() - set the value of a bitfield in a STMPE register
198 * @stmpe: Device to write to
199 * @reg: Register to write
200 * @mask: Mask of bits to set
201 * @val: Value to set
202 */
stmpe_set_bits(struct stmpe * stmpe,u8 reg,u8 mask,u8 val)203 int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
204 {
205 int ret;
206
207 mutex_lock(&stmpe->lock);
208 ret = __stmpe_set_bits(stmpe, reg, mask, val);
209 mutex_unlock(&stmpe->lock);
210
211 return ret;
212 }
213 EXPORT_SYMBOL_GPL(stmpe_set_bits);
214
215 /**
216 * stmpe_block_read() - read multiple STMPE registers
217 * @stmpe: Device to read from
218 * @reg: First register
219 * @length: Number of registers
220 * @values: Buffer to write to
221 */
stmpe_block_read(struct stmpe * stmpe,u8 reg,u8 length,u8 * values)222 int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
223 {
224 int ret;
225
226 mutex_lock(&stmpe->lock);
227 ret = __stmpe_block_read(stmpe, reg, length, values);
228 mutex_unlock(&stmpe->lock);
229
230 return ret;
231 }
232 EXPORT_SYMBOL_GPL(stmpe_block_read);
233
234 /**
235 * stmpe_block_write() - write multiple STMPE registers
236 * @stmpe: Device to write to
237 * @reg: First register
238 * @length: Number of registers
239 * @values: Values to write
240 */
stmpe_block_write(struct stmpe * stmpe,u8 reg,u8 length,const u8 * values)241 int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
242 const u8 *values)
243 {
244 int ret;
245
246 mutex_lock(&stmpe->lock);
247 ret = __stmpe_block_write(stmpe, reg, length, values);
248 mutex_unlock(&stmpe->lock);
249
250 return ret;
251 }
252 EXPORT_SYMBOL_GPL(stmpe_block_write);
253
254 /**
255 * stmpe_set_altfunc()- set the alternate function for STMPE pins
256 * @stmpe: Device to configure
257 * @pins: Bitmask of pins to affect
258 * @block: block to enable alternate functions for
259 *
260 * @pins is assumed to have a bit set for each of the bits whose alternate
261 * function is to be changed, numbered according to the GPIOXY numbers.
262 *
263 * If the GPIO module is not enabled, this function automatically enables it in
264 * order to perform the change.
265 */
stmpe_set_altfunc(struct stmpe * stmpe,u32 pins,enum stmpe_block block)266 int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
267 {
268 struct stmpe_variant_info *variant = stmpe->variant;
269 u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
270 int af_bits = variant->af_bits;
271 int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
272 int mask = (1 << af_bits) - 1;
273 u8 regs[8];
274 int af, afperreg, ret;
275
276 if (!variant->get_altfunc)
277 return 0;
278
279 afperreg = 8 / af_bits;
280 mutex_lock(&stmpe->lock);
281
282 ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
283 if (ret < 0)
284 goto out;
285
286 ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
287 if (ret < 0)
288 goto out;
289
290 af = variant->get_altfunc(stmpe, block);
291
292 while (pins) {
293 int pin = __ffs(pins);
294 int regoffset = numregs - (pin / afperreg) - 1;
295 int pos = (pin % afperreg) * (8 / afperreg);
296
297 regs[regoffset] &= ~(mask << pos);
298 regs[regoffset] |= af << pos;
299
300 pins &= ~(1 << pin);
301 }
302
303 ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
304
305 out:
306 mutex_unlock(&stmpe->lock);
307 return ret;
308 }
309 EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
310
311 /*
312 * GPIO (all variants)
313 */
314
315 static struct resource stmpe_gpio_resources[] = {
316 /* Start and end filled dynamically */
317 {
318 .flags = IORESOURCE_IRQ,
319 },
320 };
321
322 static const struct mfd_cell stmpe_gpio_cell = {
323 .name = "stmpe-gpio",
324 .of_compatible = "st,stmpe-gpio",
325 .resources = stmpe_gpio_resources,
326 .num_resources = ARRAY_SIZE(stmpe_gpio_resources),
327 };
328
329 static const struct mfd_cell stmpe_gpio_cell_noirq = {
330 .name = "stmpe-gpio",
331 .of_compatible = "st,stmpe-gpio",
332 /* gpio cell resources consist of an irq only so no resources here */
333 };
334
335 /*
336 * Keypad (1601, 2401, 2403)
337 */
338
339 static struct resource stmpe_keypad_resources[] = {
340 /* Start and end filled dynamically */
341 {
342 .name = "KEYPAD",
343 .flags = IORESOURCE_IRQ,
344 },
345 {
346 .name = "KEYPAD_OVER",
347 .flags = IORESOURCE_IRQ,
348 },
349 };
350
351 static const struct mfd_cell stmpe_keypad_cell = {
352 .name = "stmpe-keypad",
353 .of_compatible = "st,stmpe-keypad",
354 .resources = stmpe_keypad_resources,
355 .num_resources = ARRAY_SIZE(stmpe_keypad_resources),
356 };
357
358 /*
359 * PWM (1601, 2401, 2403)
360 */
361 static struct resource stmpe_pwm_resources[] = {
362 /* Start and end filled dynamically */
363 {
364 .name = "PWM0",
365 .flags = IORESOURCE_IRQ,
366 },
367 {
368 .name = "PWM1",
369 .flags = IORESOURCE_IRQ,
370 },
371 {
372 .name = "PWM2",
373 .flags = IORESOURCE_IRQ,
374 },
375 };
376
377 static const struct mfd_cell stmpe_pwm_cell = {
378 .name = "stmpe-pwm",
379 .of_compatible = "st,stmpe-pwm",
380 .resources = stmpe_pwm_resources,
381 .num_resources = ARRAY_SIZE(stmpe_pwm_resources),
382 };
383
384 /*
385 * STMPE801
386 */
387 static const u8 stmpe801_regs[] = {
388 [STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID,
389 [STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL,
390 [STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA,
391 [STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN,
392 [STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN,
393 [STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR,
394 [STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN,
395 [STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA,
396
397 };
398
399 static struct stmpe_variant_block stmpe801_blocks[] = {
400 {
401 .cell = &stmpe_gpio_cell,
402 .irq = 0,
403 .block = STMPE_BLOCK_GPIO,
404 },
405 };
406
407 static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
408 {
409 .cell = &stmpe_gpio_cell_noirq,
410 .block = STMPE_BLOCK_GPIO,
411 },
412 };
413
stmpe801_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)414 static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
415 bool enable)
416 {
417 if (blocks & STMPE_BLOCK_GPIO)
418 return 0;
419 else
420 return -EINVAL;
421 }
422
423 static struct stmpe_variant_info stmpe801 = {
424 .name = "stmpe801",
425 .id_val = STMPE801_ID,
426 .id_mask = 0xffff,
427 .num_gpios = 8,
428 .regs = stmpe801_regs,
429 .blocks = stmpe801_blocks,
430 .num_blocks = ARRAY_SIZE(stmpe801_blocks),
431 .num_irqs = STMPE801_NR_INTERNAL_IRQS,
432 .enable = stmpe801_enable,
433 };
434
435 static struct stmpe_variant_info stmpe801_noirq = {
436 .name = "stmpe801",
437 .id_val = STMPE801_ID,
438 .id_mask = 0xffff,
439 .num_gpios = 8,
440 .regs = stmpe801_regs,
441 .blocks = stmpe801_blocks_noirq,
442 .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq),
443 .enable = stmpe801_enable,
444 };
445
446 /*
447 * Touchscreen (STMPE811 or STMPE610)
448 */
449
450 static struct resource stmpe_ts_resources[] = {
451 /* Start and end filled dynamically */
452 {
453 .name = "TOUCH_DET",
454 .flags = IORESOURCE_IRQ,
455 },
456 {
457 .name = "FIFO_TH",
458 .flags = IORESOURCE_IRQ,
459 },
460 };
461
462 static const struct mfd_cell stmpe_ts_cell = {
463 .name = "stmpe-ts",
464 .of_compatible = "st,stmpe-ts",
465 .resources = stmpe_ts_resources,
466 .num_resources = ARRAY_SIZE(stmpe_ts_resources),
467 };
468
469 /*
470 * ADC (STMPE811)
471 */
472
473 static struct resource stmpe_adc_resources[] = {
474 /* Start and end filled dynamically */
475 {
476 .name = "STMPE_TEMP_SENS",
477 .flags = IORESOURCE_IRQ,
478 },
479 {
480 .name = "STMPE_ADC",
481 .flags = IORESOURCE_IRQ,
482 },
483 };
484
485 static const struct mfd_cell stmpe_adc_cell = {
486 .name = "stmpe-adc",
487 .of_compatible = "st,stmpe-adc",
488 .resources = stmpe_adc_resources,
489 .num_resources = ARRAY_SIZE(stmpe_adc_resources),
490 };
491
492 /*
493 * STMPE811 or STMPE610
494 */
495
496 static const u8 stmpe811_regs[] = {
497 [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
498 [STMPE_IDX_SYS_CTRL] = STMPE811_REG_SYS_CTRL,
499 [STMPE_IDX_SYS_CTRL2] = STMPE811_REG_SYS_CTRL2,
500 [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
501 [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
502 [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
503 [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA,
504 [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN,
505 [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN,
506 [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR,
507 [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE,
508 [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE,
509 [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
510 [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
511 [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
512 [STMPE_IDX_GPEDR_LSB] = STMPE811_REG_GPIO_ED,
513 };
514
515 static struct stmpe_variant_block stmpe811_blocks[] = {
516 {
517 .cell = &stmpe_gpio_cell,
518 .irq = STMPE811_IRQ_GPIOC,
519 .block = STMPE_BLOCK_GPIO,
520 },
521 {
522 .cell = &stmpe_ts_cell,
523 .irq = STMPE811_IRQ_TOUCH_DET,
524 .block = STMPE_BLOCK_TOUCHSCREEN,
525 },
526 {
527 .cell = &stmpe_adc_cell,
528 .irq = STMPE811_IRQ_TEMP_SENS,
529 .block = STMPE_BLOCK_ADC,
530 },
531 };
532
stmpe811_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)533 static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
534 bool enable)
535 {
536 unsigned int mask = 0;
537
538 if (blocks & STMPE_BLOCK_GPIO)
539 mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
540
541 if (blocks & STMPE_BLOCK_ADC)
542 mask |= STMPE811_SYS_CTRL2_ADC_OFF;
543
544 if (blocks & STMPE_BLOCK_TOUCHSCREEN)
545 mask |= STMPE811_SYS_CTRL2_TSC_OFF;
546
547 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], mask,
548 enable ? 0 : mask);
549 }
550
stmpe811_adc_common_init(struct stmpe * stmpe)551 int stmpe811_adc_common_init(struct stmpe *stmpe)
552 {
553 int ret;
554 u8 adc_ctrl1, adc_ctrl1_mask;
555
556 adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) |
557 STMPE_MOD_12B(stmpe->mod_12b) |
558 STMPE_REF_SEL(stmpe->ref_sel);
559 adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) |
560 STMPE_REF_SEL(0xff);
561
562 ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1,
563 adc_ctrl1_mask, adc_ctrl1);
564 if (ret) {
565 dev_err(stmpe->dev, "Could not setup ADC\n");
566 return ret;
567 }
568
569 ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2,
570 STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq));
571 if (ret) {
572 dev_err(stmpe->dev, "Could not setup ADC\n");
573 return ret;
574 }
575
576 return 0;
577 }
578 EXPORT_SYMBOL_GPL(stmpe811_adc_common_init);
579
stmpe811_get_altfunc(struct stmpe * stmpe,enum stmpe_block block)580 static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
581 {
582 /* 0 for touchscreen, 1 for GPIO */
583 return block != STMPE_BLOCK_TOUCHSCREEN;
584 }
585
586 static struct stmpe_variant_info stmpe811 = {
587 .name = "stmpe811",
588 .id_val = 0x0811,
589 .id_mask = 0xffff,
590 .num_gpios = 8,
591 .af_bits = 1,
592 .regs = stmpe811_regs,
593 .blocks = stmpe811_blocks,
594 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
595 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
596 .enable = stmpe811_enable,
597 .get_altfunc = stmpe811_get_altfunc,
598 };
599
600 /* Similar to 811, except number of gpios */
601 static struct stmpe_variant_info stmpe610 = {
602 .name = "stmpe610",
603 .id_val = 0x0811,
604 .id_mask = 0xffff,
605 .num_gpios = 6,
606 .af_bits = 1,
607 .regs = stmpe811_regs,
608 .blocks = stmpe811_blocks,
609 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
610 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
611 .enable = stmpe811_enable,
612 .get_altfunc = stmpe811_get_altfunc,
613 };
614
615 /*
616 * STMPE1600
617 * Compared to all others STMPE variant, LSB and MSB regs are located in this
618 * order : LSB addr
619 * MSB addr + 1
620 * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers
621 */
622
623 static const u8 stmpe1600_regs[] = {
624 [STMPE_IDX_CHIP_ID] = STMPE1600_REG_CHIP_ID,
625 [STMPE_IDX_SYS_CTRL] = STMPE1600_REG_SYS_CTRL,
626 [STMPE_IDX_ICR_LSB] = STMPE1600_REG_SYS_CTRL,
627 [STMPE_IDX_GPMR_LSB] = STMPE1600_REG_GPMR_LSB,
628 [STMPE_IDX_GPMR_CSB] = STMPE1600_REG_GPMR_MSB,
629 [STMPE_IDX_GPSR_LSB] = STMPE1600_REG_GPSR_LSB,
630 [STMPE_IDX_GPSR_CSB] = STMPE1600_REG_GPSR_MSB,
631 [STMPE_IDX_GPCR_LSB] = STMPE1600_REG_GPSR_LSB,
632 [STMPE_IDX_GPCR_CSB] = STMPE1600_REG_GPSR_MSB,
633 [STMPE_IDX_GPDR_LSB] = STMPE1600_REG_GPDR_LSB,
634 [STMPE_IDX_GPDR_CSB] = STMPE1600_REG_GPDR_MSB,
635 [STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB,
636 [STMPE_IDX_IEGPIOR_CSB] = STMPE1600_REG_IEGPIOR_MSB,
637 [STMPE_IDX_ISGPIOR_LSB] = STMPE1600_REG_ISGPIOR_LSB,
638 };
639
640 static struct stmpe_variant_block stmpe1600_blocks[] = {
641 {
642 .cell = &stmpe_gpio_cell,
643 .irq = 0,
644 .block = STMPE_BLOCK_GPIO,
645 },
646 };
647
stmpe1600_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)648 static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks,
649 bool enable)
650 {
651 if (blocks & STMPE_BLOCK_GPIO)
652 return 0;
653 else
654 return -EINVAL;
655 }
656
657 static struct stmpe_variant_info stmpe1600 = {
658 .name = "stmpe1600",
659 .id_val = STMPE1600_ID,
660 .id_mask = 0xffff,
661 .num_gpios = 16,
662 .af_bits = 0,
663 .regs = stmpe1600_regs,
664 .blocks = stmpe1600_blocks,
665 .num_blocks = ARRAY_SIZE(stmpe1600_blocks),
666 .num_irqs = STMPE1600_NR_INTERNAL_IRQS,
667 .enable = stmpe1600_enable,
668 };
669
670 /*
671 * STMPE1601
672 */
673
674 static const u8 stmpe1601_regs[] = {
675 [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
676 [STMPE_IDX_SYS_CTRL] = STMPE1601_REG_SYS_CTRL,
677 [STMPE_IDX_SYS_CTRL2] = STMPE1601_REG_SYS_CTRL2,
678 [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
679 [STMPE_IDX_IER_MSB] = STMPE1601_REG_IER_MSB,
680 [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
681 [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
682 [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB,
683 [STMPE_IDX_GPMR_CSB] = STMPE1601_REG_GPIO_MP_MSB,
684 [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB,
685 [STMPE_IDX_GPSR_CSB] = STMPE1601_REG_GPIO_SET_MSB,
686 [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB,
687 [STMPE_IDX_GPCR_CSB] = STMPE1601_REG_GPIO_CLR_MSB,
688 [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
689 [STMPE_IDX_GPDR_CSB] = STMPE1601_REG_GPIO_SET_DIR_MSB,
690 [STMPE_IDX_GPEDR_LSB] = STMPE1601_REG_GPIO_ED_LSB,
691 [STMPE_IDX_GPEDR_CSB] = STMPE1601_REG_GPIO_ED_MSB,
692 [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
693 [STMPE_IDX_GPRER_CSB] = STMPE1601_REG_GPIO_RE_MSB,
694 [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
695 [STMPE_IDX_GPFER_CSB] = STMPE1601_REG_GPIO_FE_MSB,
696 [STMPE_IDX_GPPUR_LSB] = STMPE1601_REG_GPIO_PU_LSB,
697 [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
698 [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
699 [STMPE_IDX_IEGPIOR_CSB] = STMPE1601_REG_INT_EN_GPIO_MASK_MSB,
700 [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
701 };
702
703 static struct stmpe_variant_block stmpe1601_blocks[] = {
704 {
705 .cell = &stmpe_gpio_cell,
706 .irq = STMPE1601_IRQ_GPIOC,
707 .block = STMPE_BLOCK_GPIO,
708 },
709 {
710 .cell = &stmpe_keypad_cell,
711 .irq = STMPE1601_IRQ_KEYPAD,
712 .block = STMPE_BLOCK_KEYPAD,
713 },
714 {
715 .cell = &stmpe_pwm_cell,
716 .irq = STMPE1601_IRQ_PWM0,
717 .block = STMPE_BLOCK_PWM,
718 },
719 };
720
721 /* supported autosleep timeout delay (in msecs) */
722 static const int stmpe_autosleep_delay[] = {
723 4, 16, 32, 64, 128, 256, 512, 1024,
724 };
725
stmpe_round_timeout(int timeout)726 static int stmpe_round_timeout(int timeout)
727 {
728 int i;
729
730 for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
731 if (stmpe_autosleep_delay[i] >= timeout)
732 return i;
733 }
734
735 /*
736 * requests for delays longer than supported should not return the
737 * longest supported delay
738 */
739 return -EINVAL;
740 }
741
stmpe_autosleep(struct stmpe * stmpe,int autosleep_timeout)742 static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
743 {
744 int ret;
745
746 if (!stmpe->variant->enable_autosleep)
747 return -ENOSYS;
748
749 mutex_lock(&stmpe->lock);
750 ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
751 mutex_unlock(&stmpe->lock);
752
753 return ret;
754 }
755
756 /*
757 * Both stmpe 1601/2403 support same layout for autosleep
758 */
stmpe1601_autosleep(struct stmpe * stmpe,int autosleep_timeout)759 static int stmpe1601_autosleep(struct stmpe *stmpe,
760 int autosleep_timeout)
761 {
762 int ret, timeout;
763
764 /* choose the best available timeout */
765 timeout = stmpe_round_timeout(autosleep_timeout);
766 if (timeout < 0) {
767 dev_err(stmpe->dev, "invalid timeout\n");
768 return timeout;
769 }
770
771 ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
772 STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
773 timeout);
774 if (ret < 0)
775 return ret;
776
777 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
778 STPME1601_AUTOSLEEP_ENABLE,
779 STPME1601_AUTOSLEEP_ENABLE);
780 }
781
stmpe1601_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)782 static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
783 bool enable)
784 {
785 unsigned int mask = 0;
786
787 if (blocks & STMPE_BLOCK_GPIO)
788 mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
789 else
790 mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
791
792 if (blocks & STMPE_BLOCK_KEYPAD)
793 mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
794 else
795 mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
796
797 if (blocks & STMPE_BLOCK_PWM)
798 mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
799 else
800 mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
801
802 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
803 enable ? mask : 0);
804 }
805
stmpe1601_get_altfunc(struct stmpe * stmpe,enum stmpe_block block)806 static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
807 {
808 switch (block) {
809 case STMPE_BLOCK_PWM:
810 return 2;
811
812 case STMPE_BLOCK_KEYPAD:
813 return 1;
814
815 case STMPE_BLOCK_GPIO:
816 default:
817 return 0;
818 }
819 }
820
821 static struct stmpe_variant_info stmpe1601 = {
822 .name = "stmpe1601",
823 .id_val = 0x0210,
824 .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */
825 .num_gpios = 16,
826 .af_bits = 2,
827 .regs = stmpe1601_regs,
828 .blocks = stmpe1601_blocks,
829 .num_blocks = ARRAY_SIZE(stmpe1601_blocks),
830 .num_irqs = STMPE1601_NR_INTERNAL_IRQS,
831 .enable = stmpe1601_enable,
832 .get_altfunc = stmpe1601_get_altfunc,
833 .enable_autosleep = stmpe1601_autosleep,
834 };
835
836 /*
837 * STMPE1801
838 */
839 static const u8 stmpe1801_regs[] = {
840 [STMPE_IDX_CHIP_ID] = STMPE1801_REG_CHIP_ID,
841 [STMPE_IDX_SYS_CTRL] = STMPE1801_REG_SYS_CTRL,
842 [STMPE_IDX_ICR_LSB] = STMPE1801_REG_INT_CTRL_LOW,
843 [STMPE_IDX_IER_LSB] = STMPE1801_REG_INT_EN_MASK_LOW,
844 [STMPE_IDX_ISR_LSB] = STMPE1801_REG_INT_STA_LOW,
845 [STMPE_IDX_GPMR_LSB] = STMPE1801_REG_GPIO_MP_LOW,
846 [STMPE_IDX_GPMR_CSB] = STMPE1801_REG_GPIO_MP_MID,
847 [STMPE_IDX_GPMR_MSB] = STMPE1801_REG_GPIO_MP_HIGH,
848 [STMPE_IDX_GPSR_LSB] = STMPE1801_REG_GPIO_SET_LOW,
849 [STMPE_IDX_GPSR_CSB] = STMPE1801_REG_GPIO_SET_MID,
850 [STMPE_IDX_GPSR_MSB] = STMPE1801_REG_GPIO_SET_HIGH,
851 [STMPE_IDX_GPCR_LSB] = STMPE1801_REG_GPIO_CLR_LOW,
852 [STMPE_IDX_GPCR_CSB] = STMPE1801_REG_GPIO_CLR_MID,
853 [STMPE_IDX_GPCR_MSB] = STMPE1801_REG_GPIO_CLR_HIGH,
854 [STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW,
855 [STMPE_IDX_GPDR_CSB] = STMPE1801_REG_GPIO_SET_DIR_MID,
856 [STMPE_IDX_GPDR_MSB] = STMPE1801_REG_GPIO_SET_DIR_HIGH,
857 [STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW,
858 [STMPE_IDX_GPRER_CSB] = STMPE1801_REG_GPIO_RE_MID,
859 [STMPE_IDX_GPRER_MSB] = STMPE1801_REG_GPIO_RE_HIGH,
860 [STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW,
861 [STMPE_IDX_GPFER_CSB] = STMPE1801_REG_GPIO_FE_MID,
862 [STMPE_IDX_GPFER_MSB] = STMPE1801_REG_GPIO_FE_HIGH,
863 [STMPE_IDX_GPPUR_LSB] = STMPE1801_REG_GPIO_PULL_UP_LOW,
864 [STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
865 [STMPE_IDX_IEGPIOR_CSB] = STMPE1801_REG_INT_EN_GPIO_MASK_MID,
866 [STMPE_IDX_IEGPIOR_MSB] = STMPE1801_REG_INT_EN_GPIO_MASK_HIGH,
867 [STMPE_IDX_ISGPIOR_MSB] = STMPE1801_REG_INT_STA_GPIO_HIGH,
868 };
869
870 static struct stmpe_variant_block stmpe1801_blocks[] = {
871 {
872 .cell = &stmpe_gpio_cell,
873 .irq = STMPE1801_IRQ_GPIOC,
874 .block = STMPE_BLOCK_GPIO,
875 },
876 {
877 .cell = &stmpe_keypad_cell,
878 .irq = STMPE1801_IRQ_KEYPAD,
879 .block = STMPE_BLOCK_KEYPAD,
880 },
881 };
882
stmpe1801_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)883 static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
884 bool enable)
885 {
886 unsigned int mask = 0;
887 if (blocks & STMPE_BLOCK_GPIO)
888 mask |= STMPE1801_MSK_INT_EN_GPIO;
889
890 if (blocks & STMPE_BLOCK_KEYPAD)
891 mask |= STMPE1801_MSK_INT_EN_KPC;
892
893 return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
894 enable ? mask : 0);
895 }
896
stmpe_reset(struct stmpe * stmpe)897 static int stmpe_reset(struct stmpe *stmpe)
898 {
899 u16 id_val = stmpe->variant->id_val;
900 unsigned long timeout;
901 int ret = 0;
902 u8 reset_bit;
903
904 if (id_val == STMPE811_ID)
905 /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */
906 reset_bit = STMPE811_SYS_CTRL_RESET;
907 else
908 /* all other STMPE variant use bit 7 of SYS_CTRL register */
909 reset_bit = STMPE_SYS_CTRL_RESET;
910
911 ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL],
912 reset_bit, reset_bit);
913 if (ret < 0)
914 return ret;
915
916 msleep(10);
917
918 timeout = jiffies + msecs_to_jiffies(100);
919 while (time_before(jiffies, timeout)) {
920 ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]);
921 if (ret < 0)
922 return ret;
923 if (!(ret & reset_bit))
924 return 0;
925 usleep_range(100, 200);
926 }
927 return -EIO;
928 }
929
930 static struct stmpe_variant_info stmpe1801 = {
931 .name = "stmpe1801",
932 .id_val = STMPE1801_ID,
933 .id_mask = 0xfff0,
934 .num_gpios = 18,
935 .af_bits = 0,
936 .regs = stmpe1801_regs,
937 .blocks = stmpe1801_blocks,
938 .num_blocks = ARRAY_SIZE(stmpe1801_blocks),
939 .num_irqs = STMPE1801_NR_INTERNAL_IRQS,
940 .enable = stmpe1801_enable,
941 /* stmpe1801 do not have any gpio alternate function */
942 .get_altfunc = NULL,
943 };
944
945 /*
946 * STMPE24XX
947 */
948
949 static const u8 stmpe24xx_regs[] = {
950 [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
951 [STMPE_IDX_SYS_CTRL] = STMPE24XX_REG_SYS_CTRL,
952 [STMPE_IDX_SYS_CTRL2] = STMPE24XX_REG_SYS_CTRL2,
953 [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
954 [STMPE_IDX_IER_MSB] = STMPE24XX_REG_IER_MSB,
955 [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
956 [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
957 [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB,
958 [STMPE_IDX_GPMR_CSB] = STMPE24XX_REG_GPMR_CSB,
959 [STMPE_IDX_GPMR_MSB] = STMPE24XX_REG_GPMR_MSB,
960 [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB,
961 [STMPE_IDX_GPSR_CSB] = STMPE24XX_REG_GPSR_CSB,
962 [STMPE_IDX_GPSR_MSB] = STMPE24XX_REG_GPSR_MSB,
963 [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB,
964 [STMPE_IDX_GPCR_CSB] = STMPE24XX_REG_GPCR_CSB,
965 [STMPE_IDX_GPCR_MSB] = STMPE24XX_REG_GPCR_MSB,
966 [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
967 [STMPE_IDX_GPDR_CSB] = STMPE24XX_REG_GPDR_CSB,
968 [STMPE_IDX_GPDR_MSB] = STMPE24XX_REG_GPDR_MSB,
969 [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
970 [STMPE_IDX_GPRER_CSB] = STMPE24XX_REG_GPRER_CSB,
971 [STMPE_IDX_GPRER_MSB] = STMPE24XX_REG_GPRER_MSB,
972 [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
973 [STMPE_IDX_GPFER_CSB] = STMPE24XX_REG_GPFER_CSB,
974 [STMPE_IDX_GPFER_MSB] = STMPE24XX_REG_GPFER_MSB,
975 [STMPE_IDX_GPPUR_LSB] = STMPE24XX_REG_GPPUR_LSB,
976 [STMPE_IDX_GPPDR_LSB] = STMPE24XX_REG_GPPDR_LSB,
977 [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
978 [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
979 [STMPE_IDX_IEGPIOR_CSB] = STMPE24XX_REG_IEGPIOR_CSB,
980 [STMPE_IDX_IEGPIOR_MSB] = STMPE24XX_REG_IEGPIOR_MSB,
981 [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
982 [STMPE_IDX_GPEDR_LSB] = STMPE24XX_REG_GPEDR_LSB,
983 [STMPE_IDX_GPEDR_CSB] = STMPE24XX_REG_GPEDR_CSB,
984 [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB,
985 };
986
987 static struct stmpe_variant_block stmpe24xx_blocks[] = {
988 {
989 .cell = &stmpe_gpio_cell,
990 .irq = STMPE24XX_IRQ_GPIOC,
991 .block = STMPE_BLOCK_GPIO,
992 },
993 {
994 .cell = &stmpe_keypad_cell,
995 .irq = STMPE24XX_IRQ_KEYPAD,
996 .block = STMPE_BLOCK_KEYPAD,
997 },
998 {
999 .cell = &stmpe_pwm_cell,
1000 .irq = STMPE24XX_IRQ_PWM0,
1001 .block = STMPE_BLOCK_PWM,
1002 },
1003 };
1004
stmpe24xx_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)1005 static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
1006 bool enable)
1007 {
1008 unsigned int mask = 0;
1009
1010 if (blocks & STMPE_BLOCK_GPIO)
1011 mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
1012
1013 if (blocks & STMPE_BLOCK_KEYPAD)
1014 mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
1015
1016 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
1017 enable ? mask : 0);
1018 }
1019
stmpe24xx_get_altfunc(struct stmpe * stmpe,enum stmpe_block block)1020 static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
1021 {
1022 switch (block) {
1023 case STMPE_BLOCK_ROTATOR:
1024 return 2;
1025
1026 case STMPE_BLOCK_KEYPAD:
1027 case STMPE_BLOCK_PWM:
1028 return 1;
1029
1030 case STMPE_BLOCK_GPIO:
1031 default:
1032 return 0;
1033 }
1034 }
1035
1036 static struct stmpe_variant_info stmpe2401 = {
1037 .name = "stmpe2401",
1038 .id_val = 0x0101,
1039 .id_mask = 0xffff,
1040 .num_gpios = 24,
1041 .af_bits = 2,
1042 .regs = stmpe24xx_regs,
1043 .blocks = stmpe24xx_blocks,
1044 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
1045 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
1046 .enable = stmpe24xx_enable,
1047 .get_altfunc = stmpe24xx_get_altfunc,
1048 };
1049
1050 static struct stmpe_variant_info stmpe2403 = {
1051 .name = "stmpe2403",
1052 .id_val = 0x0120,
1053 .id_mask = 0xffff,
1054 .num_gpios = 24,
1055 .af_bits = 2,
1056 .regs = stmpe24xx_regs,
1057 .blocks = stmpe24xx_blocks,
1058 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
1059 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
1060 .enable = stmpe24xx_enable,
1061 .get_altfunc = stmpe24xx_get_altfunc,
1062 .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
1063 };
1064
1065 static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
1066 [STMPE610] = &stmpe610,
1067 [STMPE801] = &stmpe801,
1068 [STMPE811] = &stmpe811,
1069 [STMPE1600] = &stmpe1600,
1070 [STMPE1601] = &stmpe1601,
1071 [STMPE1801] = &stmpe1801,
1072 [STMPE2401] = &stmpe2401,
1073 [STMPE2403] = &stmpe2403,
1074 };
1075
1076 /*
1077 * These devices can be connected in a 'no-irq' configuration - the irq pin
1078 * is not used and the device cannot interrupt the CPU. Here we only list
1079 * devices which support this configuration - the driver will fail probing
1080 * for any devices not listed here which are configured in this way.
1081 */
1082 static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
1083 [STMPE801] = &stmpe801_noirq,
1084 };
1085
stmpe_irq(int irq,void * data)1086 static irqreturn_t stmpe_irq(int irq, void *data)
1087 {
1088 struct stmpe *stmpe = data;
1089 struct stmpe_variant_info *variant = stmpe->variant;
1090 int num = DIV_ROUND_UP(variant->num_irqs, 8);
1091 u8 israddr;
1092 u8 isr[3];
1093 int ret;
1094 int i;
1095
1096 if (variant->id_val == STMPE801_ID ||
1097 variant->id_val == STMPE1600_ID) {
1098 int base = irq_find_mapping(stmpe->domain, 0);
1099
1100 handle_nested_irq(base);
1101 return IRQ_HANDLED;
1102 }
1103
1104 if (variant->id_val == STMPE1801_ID)
1105 israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
1106 else
1107 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
1108
1109 ret = stmpe_block_read(stmpe, israddr, num, isr);
1110 if (ret < 0)
1111 return IRQ_NONE;
1112
1113 for (i = 0; i < num; i++) {
1114 int bank = num - i - 1;
1115 u8 status = isr[i];
1116 u8 clear;
1117
1118 status &= stmpe->ier[bank];
1119 if (!status)
1120 continue;
1121
1122 clear = status;
1123 while (status) {
1124 int bit = __ffs(status);
1125 int line = bank * 8 + bit;
1126 int nestedirq = irq_find_mapping(stmpe->domain, line);
1127
1128 handle_nested_irq(nestedirq);
1129 status &= ~(1 << bit);
1130 }
1131
1132 stmpe_reg_write(stmpe, israddr + i, clear);
1133 }
1134
1135 return IRQ_HANDLED;
1136 }
1137
stmpe_irq_lock(struct irq_data * data)1138 static void stmpe_irq_lock(struct irq_data *data)
1139 {
1140 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1141
1142 mutex_lock(&stmpe->irq_lock);
1143 }
1144
stmpe_irq_sync_unlock(struct irq_data * data)1145 static void stmpe_irq_sync_unlock(struct irq_data *data)
1146 {
1147 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1148 struct stmpe_variant_info *variant = stmpe->variant;
1149 int num = DIV_ROUND_UP(variant->num_irqs, 8);
1150 int i;
1151
1152 for (i = 0; i < num; i++) {
1153 u8 new = stmpe->ier[i];
1154 u8 old = stmpe->oldier[i];
1155
1156 if (new == old)
1157 continue;
1158
1159 stmpe->oldier[i] = new;
1160 stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB + i], new);
1161 }
1162
1163 mutex_unlock(&stmpe->irq_lock);
1164 }
1165
stmpe_irq_mask(struct irq_data * data)1166 static void stmpe_irq_mask(struct irq_data *data)
1167 {
1168 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1169 int offset = data->hwirq;
1170 int regoffset = offset / 8;
1171 int mask = 1 << (offset % 8);
1172
1173 stmpe->ier[regoffset] &= ~mask;
1174 }
1175
stmpe_irq_unmask(struct irq_data * data)1176 static void stmpe_irq_unmask(struct irq_data *data)
1177 {
1178 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1179 int offset = data->hwirq;
1180 int regoffset = offset / 8;
1181 int mask = 1 << (offset % 8);
1182
1183 stmpe->ier[regoffset] |= mask;
1184 }
1185
1186 static struct irq_chip stmpe_irq_chip = {
1187 .name = "stmpe",
1188 .irq_bus_lock = stmpe_irq_lock,
1189 .irq_bus_sync_unlock = stmpe_irq_sync_unlock,
1190 .irq_mask = stmpe_irq_mask,
1191 .irq_unmask = stmpe_irq_unmask,
1192 };
1193
stmpe_irq_map(struct irq_domain * d,unsigned int virq,irq_hw_number_t hwirq)1194 static int stmpe_irq_map(struct irq_domain *d, unsigned int virq,
1195 irq_hw_number_t hwirq)
1196 {
1197 struct stmpe *stmpe = d->host_data;
1198 struct irq_chip *chip = NULL;
1199
1200 if (stmpe->variant->id_val != STMPE801_ID)
1201 chip = &stmpe_irq_chip;
1202
1203 irq_set_chip_data(virq, stmpe);
1204 irq_set_chip_and_handler(virq, chip, handle_edge_irq);
1205 irq_set_nested_thread(virq, 1);
1206 irq_set_noprobe(virq);
1207
1208 return 0;
1209 }
1210
stmpe_irq_unmap(struct irq_domain * d,unsigned int virq)1211 static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq)
1212 {
1213 irq_set_chip_and_handler(virq, NULL, NULL);
1214 irq_set_chip_data(virq, NULL);
1215 }
1216
1217 static const struct irq_domain_ops stmpe_irq_ops = {
1218 .map = stmpe_irq_map,
1219 .unmap = stmpe_irq_unmap,
1220 .xlate = irq_domain_xlate_twocell,
1221 };
1222
stmpe_irq_init(struct stmpe * stmpe,struct device_node * np)1223 static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
1224 {
1225 int base = 0;
1226 int num_irqs = stmpe->variant->num_irqs;
1227
1228 stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
1229 &stmpe_irq_ops, stmpe);
1230 if (!stmpe->domain) {
1231 dev_err(stmpe->dev, "Failed to create irqdomain\n");
1232 return -ENOSYS;
1233 }
1234
1235 return 0;
1236 }
1237
stmpe_chip_init(struct stmpe * stmpe)1238 static int stmpe_chip_init(struct stmpe *stmpe)
1239 {
1240 unsigned int irq_trigger = stmpe->pdata->irq_trigger;
1241 int autosleep_timeout = stmpe->pdata->autosleep_timeout;
1242 struct stmpe_variant_info *variant = stmpe->variant;
1243 u8 icr = 0;
1244 unsigned int id;
1245 u8 data[2];
1246 int ret;
1247
1248 ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
1249 ARRAY_SIZE(data), data);
1250 if (ret < 0)
1251 return ret;
1252
1253 id = (data[0] << 8) | data[1];
1254 if ((id & variant->id_mask) != variant->id_val) {
1255 dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
1256 return -EINVAL;
1257 }
1258
1259 dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
1260
1261 /* Disable all modules -- subdrivers should enable what they need. */
1262 ret = stmpe_disable(stmpe, ~0);
1263 if (ret)
1264 return ret;
1265
1266 ret = stmpe_reset(stmpe);
1267 if (ret < 0)
1268 return ret;
1269
1270 if (stmpe->irq >= 0) {
1271 if (id == STMPE801_ID || id == STMPE1600_ID)
1272 icr = STMPE_SYS_CTRL_INT_EN;
1273 else
1274 icr = STMPE_ICR_LSB_GIM;
1275
1276 /* STMPE801 and STMPE1600 don't support Edge interrupts */
1277 if (id != STMPE801_ID && id != STMPE1600_ID) {
1278 if (irq_trigger == IRQF_TRIGGER_FALLING ||
1279 irq_trigger == IRQF_TRIGGER_RISING)
1280 icr |= STMPE_ICR_LSB_EDGE;
1281 }
1282
1283 if (irq_trigger == IRQF_TRIGGER_RISING ||
1284 irq_trigger == IRQF_TRIGGER_HIGH) {
1285 if (id == STMPE801_ID || id == STMPE1600_ID)
1286 icr |= STMPE_SYS_CTRL_INT_HI;
1287 else
1288 icr |= STMPE_ICR_LSB_HIGH;
1289 }
1290 }
1291
1292 if (stmpe->pdata->autosleep) {
1293 ret = stmpe_autosleep(stmpe, autosleep_timeout);
1294 if (ret)
1295 return ret;
1296 }
1297
1298 return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
1299 }
1300
stmpe_add_device(struct stmpe * stmpe,const struct mfd_cell * cell)1301 static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
1302 {
1303 return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
1304 NULL, 0, stmpe->domain);
1305 }
1306
stmpe_devices_init(struct stmpe * stmpe)1307 static int stmpe_devices_init(struct stmpe *stmpe)
1308 {
1309 struct stmpe_variant_info *variant = stmpe->variant;
1310 unsigned int platform_blocks = stmpe->pdata->blocks;
1311 int ret = -EINVAL;
1312 int i, j;
1313
1314 for (i = 0; i < variant->num_blocks; i++) {
1315 struct stmpe_variant_block *block = &variant->blocks[i];
1316
1317 if (!(platform_blocks & block->block))
1318 continue;
1319
1320 for (j = 0; j < block->cell->num_resources; j++) {
1321 struct resource *res =
1322 (struct resource *) &block->cell->resources[j];
1323
1324 /* Dynamically fill in a variant's IRQ. */
1325 if (res->flags & IORESOURCE_IRQ)
1326 res->start = res->end = block->irq + j;
1327 }
1328
1329 platform_blocks &= ~block->block;
1330 ret = stmpe_add_device(stmpe, block->cell);
1331 if (ret)
1332 return ret;
1333 }
1334
1335 if (platform_blocks)
1336 dev_warn(stmpe->dev,
1337 "platform wants blocks (%#x) not present on variant",
1338 platform_blocks);
1339
1340 return ret;
1341 }
1342
stmpe_of_probe(struct stmpe_platform_data * pdata,struct device_node * np)1343 static void stmpe_of_probe(struct stmpe_platform_data *pdata,
1344 struct device_node *np)
1345 {
1346 struct device_node *child;
1347
1348 pdata->id = of_alias_get_id(np, "stmpe-i2c");
1349 if (pdata->id < 0)
1350 pdata->id = -1;
1351
1352 pdata->irq_gpio = of_get_named_gpio_flags(np, "irq-gpio", 0,
1353 &pdata->irq_trigger);
1354 if (gpio_is_valid(pdata->irq_gpio))
1355 pdata->irq_over_gpio = 1;
1356 else
1357 pdata->irq_trigger = IRQF_TRIGGER_NONE;
1358
1359 of_property_read_u32(np, "st,autosleep-timeout",
1360 &pdata->autosleep_timeout);
1361
1362 pdata->autosleep = (pdata->autosleep_timeout) ? true : false;
1363
1364 for_each_available_child_of_node(np, child) {
1365 if (of_node_name_eq(child, "stmpe_gpio")) {
1366 pdata->blocks |= STMPE_BLOCK_GPIO;
1367 } else if (of_node_name_eq(child, "stmpe_keypad")) {
1368 pdata->blocks |= STMPE_BLOCK_KEYPAD;
1369 } else if (of_node_name_eq(child, "stmpe_touchscreen")) {
1370 pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN;
1371 } else if (of_node_name_eq(child, "stmpe_adc")) {
1372 pdata->blocks |= STMPE_BLOCK_ADC;
1373 } else if (of_node_name_eq(child, "stmpe_pwm")) {
1374 pdata->blocks |= STMPE_BLOCK_PWM;
1375 } else if (of_node_name_eq(child, "stmpe_rotator")) {
1376 pdata->blocks |= STMPE_BLOCK_ROTATOR;
1377 }
1378 }
1379 }
1380
1381 /* Called from client specific probe routines */
stmpe_probe(struct stmpe_client_info * ci,enum stmpe_partnum partnum)1382 int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
1383 {
1384 struct stmpe_platform_data *pdata;
1385 struct device_node *np = ci->dev->of_node;
1386 struct stmpe *stmpe;
1387 int ret;
1388 u32 val;
1389
1390 pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
1391 if (!pdata)
1392 return -ENOMEM;
1393
1394 stmpe_of_probe(pdata, np);
1395
1396 if (of_find_property(np, "interrupts", NULL) == NULL)
1397 ci->irq = -1;
1398
1399 stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
1400 if (!stmpe)
1401 return -ENOMEM;
1402
1403 mutex_init(&stmpe->irq_lock);
1404 mutex_init(&stmpe->lock);
1405
1406 if (!of_property_read_u32(np, "st,sample-time", &val))
1407 stmpe->sample_time = val;
1408 if (!of_property_read_u32(np, "st,mod-12b", &val))
1409 stmpe->mod_12b = val;
1410 if (!of_property_read_u32(np, "st,ref-sel", &val))
1411 stmpe->ref_sel = val;
1412 if (!of_property_read_u32(np, "st,adc-freq", &val))
1413 stmpe->adc_freq = val;
1414
1415 stmpe->dev = ci->dev;
1416 stmpe->client = ci->client;
1417 stmpe->pdata = pdata;
1418 stmpe->ci = ci;
1419 stmpe->partnum = partnum;
1420 stmpe->variant = stmpe_variant_info[partnum];
1421 stmpe->regs = stmpe->variant->regs;
1422 stmpe->num_gpios = stmpe->variant->num_gpios;
1423 stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc");
1424 if (!IS_ERR(stmpe->vcc)) {
1425 ret = regulator_enable(stmpe->vcc);
1426 if (ret)
1427 dev_warn(ci->dev, "failed to enable VCC supply\n");
1428 }
1429 stmpe->vio = devm_regulator_get_optional(ci->dev, "vio");
1430 if (!IS_ERR(stmpe->vio)) {
1431 ret = regulator_enable(stmpe->vio);
1432 if (ret)
1433 dev_warn(ci->dev, "failed to enable VIO supply\n");
1434 }
1435 dev_set_drvdata(stmpe->dev, stmpe);
1436
1437 if (ci->init)
1438 ci->init(stmpe);
1439
1440 if (pdata->irq_over_gpio) {
1441 ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio,
1442 GPIOF_DIR_IN, "stmpe");
1443 if (ret) {
1444 dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n",
1445 ret);
1446 return ret;
1447 }
1448
1449 stmpe->irq = gpio_to_irq(pdata->irq_gpio);
1450 } else {
1451 stmpe->irq = ci->irq;
1452 }
1453
1454 if (stmpe->irq < 0) {
1455 /* use alternate variant info for no-irq mode, if supported */
1456 dev_info(stmpe->dev,
1457 "%s configured in no-irq mode by platform data\n",
1458 stmpe->variant->name);
1459 if (!stmpe_noirq_variant_info[stmpe->partnum]) {
1460 dev_err(stmpe->dev,
1461 "%s does not support no-irq mode!\n",
1462 stmpe->variant->name);
1463 return -ENODEV;
1464 }
1465 stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
1466 } else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) {
1467 pdata->irq_trigger = irq_get_trigger_type(stmpe->irq);
1468 }
1469
1470 ret = stmpe_chip_init(stmpe);
1471 if (ret)
1472 return ret;
1473
1474 if (stmpe->irq >= 0) {
1475 ret = stmpe_irq_init(stmpe, np);
1476 if (ret)
1477 return ret;
1478
1479 ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL,
1480 stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT,
1481 "stmpe", stmpe);
1482 if (ret) {
1483 dev_err(stmpe->dev, "failed to request IRQ: %d\n",
1484 ret);
1485 return ret;
1486 }
1487 }
1488
1489 ret = stmpe_devices_init(stmpe);
1490 if (!ret)
1491 return 0;
1492
1493 dev_err(stmpe->dev, "failed to add children\n");
1494 mfd_remove_devices(stmpe->dev);
1495
1496 return ret;
1497 }
1498
stmpe_remove(struct stmpe * stmpe)1499 void stmpe_remove(struct stmpe *stmpe)
1500 {
1501 if (!IS_ERR(stmpe->vio))
1502 regulator_disable(stmpe->vio);
1503 if (!IS_ERR(stmpe->vcc))
1504 regulator_disable(stmpe->vcc);
1505
1506 __stmpe_disable(stmpe, STMPE_BLOCK_ADC);
1507
1508 mfd_remove_devices(stmpe->dev);
1509 }
1510
1511 #ifdef CONFIG_PM
stmpe_suspend(struct device * dev)1512 static int stmpe_suspend(struct device *dev)
1513 {
1514 struct stmpe *stmpe = dev_get_drvdata(dev);
1515
1516 if (stmpe->irq >= 0 && device_may_wakeup(dev))
1517 enable_irq_wake(stmpe->irq);
1518
1519 return 0;
1520 }
1521
stmpe_resume(struct device * dev)1522 static int stmpe_resume(struct device *dev)
1523 {
1524 struct stmpe *stmpe = dev_get_drvdata(dev);
1525
1526 if (stmpe->irq >= 0 && device_may_wakeup(dev))
1527 disable_irq_wake(stmpe->irq);
1528
1529 return 0;
1530 }
1531
1532 const struct dev_pm_ops stmpe_dev_pm_ops = {
1533 .suspend = stmpe_suspend,
1534 .resume = stmpe_resume,
1535 };
1536 #endif
1537