1 /*
2  * Sonics Silicon Backplane PCI-Hostbus related functions.
3  *
4  * Copyright (C) 2005-2006 Michael Buesch <mb@bu3sch.de>
5  * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
6  * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
7  * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
8  * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
9  *
10  * Derived from the Broadcom 4400 device driver.
11  * Copyright (C) 2002 David S. Miller (davem@redhat.com)
12  * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
13  * Copyright (C) 2006 Broadcom Corporation.
14  *
15  * Licensed under the GNU/GPL. See COPYING for details.
16  */
17 
18 #include <linux/ssb/ssb.h>
19 #include <linux/ssb/ssb_regs.h>
20 #include <linux/slab.h>
21 #include <linux/pci.h>
22 #include <linux/delay.h>
23 
24 #include "ssb_private.h"
25 
26 
27 /* Define the following to 1 to enable a printk on each coreswitch. */
28 #define SSB_VERBOSE_PCICORESWITCH_DEBUG		0
29 
30 
31 /* Lowlevel coreswitching */
ssb_pci_switch_coreidx(struct ssb_bus * bus,u8 coreidx)32 int ssb_pci_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
33 {
34 	int err;
35 	int attempts = 0;
36 	u32 cur_core;
37 
38 	while (1) {
39 		err = pci_write_config_dword(bus->host_pci, SSB_BAR0_WIN,
40 					     (coreidx * SSB_CORE_SIZE)
41 					     + SSB_ENUM_BASE);
42 		if (err)
43 			goto error;
44 		err = pci_read_config_dword(bus->host_pci, SSB_BAR0_WIN,
45 					    &cur_core);
46 		if (err)
47 			goto error;
48 		cur_core = (cur_core - SSB_ENUM_BASE)
49 			   / SSB_CORE_SIZE;
50 		if (cur_core == coreidx)
51 			break;
52 
53 		if (attempts++ > SSB_BAR0_MAX_RETRIES)
54 			goto error;
55 		udelay(10);
56 	}
57 	return 0;
58 error:
59 	ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
60 	return -ENODEV;
61 }
62 
ssb_pci_switch_core(struct ssb_bus * bus,struct ssb_device * dev)63 int ssb_pci_switch_core(struct ssb_bus *bus,
64 			struct ssb_device *dev)
65 {
66 	int err;
67 	unsigned long flags;
68 
69 #if SSB_VERBOSE_PCICORESWITCH_DEBUG
70 	ssb_printk(KERN_INFO PFX
71 		   "Switching to %s core, index %d\n",
72 		   ssb_core_name(dev->id.coreid),
73 		   dev->core_index);
74 #endif
75 
76 	spin_lock_irqsave(&bus->bar_lock, flags);
77 	err = ssb_pci_switch_coreidx(bus, dev->core_index);
78 	if (!err)
79 		bus->mapped_device = dev;
80 	spin_unlock_irqrestore(&bus->bar_lock, flags);
81 
82 	return err;
83 }
84 
85 /* Enable/disable the on board crystal oscillator and/or PLL. */
ssb_pci_xtal(struct ssb_bus * bus,u32 what,int turn_on)86 int ssb_pci_xtal(struct ssb_bus *bus, u32 what, int turn_on)
87 {
88 	int err;
89 	u32 in, out, outenable;
90 	u16 pci_status;
91 
92 	if (bus->bustype != SSB_BUSTYPE_PCI)
93 		return 0;
94 
95 	err = pci_read_config_dword(bus->host_pci, SSB_GPIO_IN, &in);
96 	if (err)
97 		goto err_pci;
98 	err = pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &out);
99 	if (err)
100 		goto err_pci;
101 	err = pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, &outenable);
102 	if (err)
103 		goto err_pci;
104 
105 	outenable |= what;
106 
107 	if (turn_on) {
108 		/* Avoid glitching the clock if GPRS is already using it.
109 		 * We can't actually read the state of the PLLPD so we infer it
110 		 * by the value of XTAL_PU which *is* readable via gpioin.
111 		 */
112 		if (!(in & SSB_GPIO_XTAL)) {
113 			if (what & SSB_GPIO_XTAL) {
114 				/* Turn the crystal on */
115 				out |= SSB_GPIO_XTAL;
116 				if (what & SSB_GPIO_PLL)
117 					out |= SSB_GPIO_PLL;
118 				err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out);
119 				if (err)
120 					goto err_pci;
121 				err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE,
122 							     outenable);
123 				if (err)
124 					goto err_pci;
125 				msleep(1);
126 			}
127 			if (what & SSB_GPIO_PLL) {
128 				/* Turn the PLL on */
129 				out &= ~SSB_GPIO_PLL;
130 				err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out);
131 				if (err)
132 					goto err_pci;
133 				msleep(5);
134 			}
135 		}
136 
137 		err = pci_read_config_word(bus->host_pci, PCI_STATUS, &pci_status);
138 		if (err)
139 			goto err_pci;
140 		pci_status &= ~PCI_STATUS_SIG_TARGET_ABORT;
141 		err = pci_write_config_word(bus->host_pci, PCI_STATUS, pci_status);
142 		if (err)
143 			goto err_pci;
144 	} else {
145 		if (what & SSB_GPIO_XTAL) {
146 			/* Turn the crystal off */
147 			out &= ~SSB_GPIO_XTAL;
148 		}
149 		if (what & SSB_GPIO_PLL) {
150 			/* Turn the PLL off */
151 			out |= SSB_GPIO_PLL;
152 		}
153 		err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out);
154 		if (err)
155 			goto err_pci;
156 		err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, outenable);
157 		if (err)
158 			goto err_pci;
159 	}
160 
161 out:
162 	return err;
163 
164 err_pci:
165 	printk(KERN_ERR PFX "Error: ssb_pci_xtal() could not access PCI config space!\n");
166 	err = -EBUSY;
167 	goto out;
168 }
169 
170 /* Get the word-offset for a SSB_SPROM_XXX define. */
171 #define SPOFF(offset)	((offset) / sizeof(u16))
172 /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
173 #define SPEX16(_outvar, _offset, _mask, _shift)	\
174 	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
175 #define SPEX32(_outvar, _offset, _mask, _shift)	\
176 	out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
177 			   in[SPOFF(_offset)]) & (_mask)) >> (_shift))
178 #define SPEX(_outvar, _offset, _mask, _shift) \
179 	SPEX16(_outvar, _offset, _mask, _shift)
180 
181 
ssb_crc8(u8 crc,u8 data)182 static inline u8 ssb_crc8(u8 crc, u8 data)
183 {
184 	/* Polynomial:   x^8 + x^7 + x^6 + x^4 + x^2 + 1   */
185 	static const u8 t[] = {
186 		0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
187 		0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
188 		0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
189 		0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
190 		0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
191 		0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
192 		0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
193 		0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
194 		0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
195 		0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
196 		0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
197 		0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
198 		0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
199 		0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
200 		0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
201 		0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
202 		0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
203 		0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
204 		0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
205 		0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
206 		0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
207 		0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
208 		0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
209 		0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
210 		0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
211 		0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
212 		0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
213 		0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
214 		0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
215 		0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
216 		0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
217 		0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F,
218 	};
219 	return t[crc ^ data];
220 }
221 
ssb_sprom_crc(const u16 * sprom,u16 size)222 static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
223 {
224 	int word;
225 	u8 crc = 0xFF;
226 
227 	for (word = 0; word < size - 1; word++) {
228 		crc = ssb_crc8(crc, sprom[word] & 0x00FF);
229 		crc = ssb_crc8(crc, (sprom[word] & 0xFF00) >> 8);
230 	}
231 	crc = ssb_crc8(crc, sprom[size - 1] & 0x00FF);
232 	crc ^= 0xFF;
233 
234 	return crc;
235 }
236 
sprom_check_crc(const u16 * sprom,size_t size)237 static int sprom_check_crc(const u16 *sprom, size_t size)
238 {
239 	u8 crc;
240 	u8 expected_crc;
241 	u16 tmp;
242 
243 	crc = ssb_sprom_crc(sprom, size);
244 	tmp = sprom[size - 1] & SSB_SPROM_REVISION_CRC;
245 	expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
246 	if (crc != expected_crc)
247 		return -EPROTO;
248 
249 	return 0;
250 }
251 
sprom_do_read(struct ssb_bus * bus,u16 * sprom)252 static int sprom_do_read(struct ssb_bus *bus, u16 *sprom)
253 {
254 	int i;
255 
256 	for (i = 0; i < bus->sprom_size; i++)
257 		sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
258 
259 	return 0;
260 }
261 
sprom_do_write(struct ssb_bus * bus,const u16 * sprom)262 static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
263 {
264 	struct pci_dev *pdev = bus->host_pci;
265 	int i, err;
266 	u32 spromctl;
267 	u16 size = bus->sprom_size;
268 
269 	ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
270 	err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
271 	if (err)
272 		goto err_ctlreg;
273 	spromctl |= SSB_SPROMCTL_WE;
274 	err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
275 	if (err)
276 		goto err_ctlreg;
277 	ssb_printk(KERN_NOTICE PFX "[ 0%%");
278 	msleep(500);
279 	for (i = 0; i < size; i++) {
280 		if (i == size / 4)
281 			ssb_printk("25%%");
282 		else if (i == size / 2)
283 			ssb_printk("50%%");
284 		else if (i == (size * 3) / 4)
285 			ssb_printk("75%%");
286 		else if (i % 2)
287 			ssb_printk(".");
288 		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
289 		mmiowb();
290 		msleep(20);
291 	}
292 	err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
293 	if (err)
294 		goto err_ctlreg;
295 	spromctl &= ~SSB_SPROMCTL_WE;
296 	err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
297 	if (err)
298 		goto err_ctlreg;
299 	msleep(500);
300 	ssb_printk("100%% ]\n");
301 	ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
302 
303 	return 0;
304 err_ctlreg:
305 	ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
306 	return err;
307 }
308 
r123_extract_antgain(u8 sprom_revision,const u16 * in,u16 mask,u16 shift)309 static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in,
310 			       u16 mask, u16 shift)
311 {
312 	u16 v;
313 	u8 gain;
314 
315 	v = in[SPOFF(SSB_SPROM1_AGAIN)];
316 	gain = (v & mask) >> shift;
317 	if (gain == 0xFF)
318 		gain = 2; /* If unset use 2dBm */
319 	if (sprom_revision == 1) {
320 		/* Convert to Q5.2 */
321 		gain <<= 2;
322 	} else {
323 		/* Q5.2 Fractional part is stored in 0xC0 */
324 		gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
325 	}
326 
327 	return (s8)gain;
328 }
329 
sprom_extract_r123(struct ssb_sprom * out,const u16 * in)330 static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
331 {
332 	int i;
333 	u16 v;
334 	s8 gain;
335 	u16 loc[3];
336 
337 	if (out->revision == 3)			/* rev 3 moved MAC */
338 		loc[0] = SSB_SPROM3_IL0MAC;
339 	else {
340 		loc[0] = SSB_SPROM1_IL0MAC;
341 		loc[1] = SSB_SPROM1_ET0MAC;
342 		loc[2] = SSB_SPROM1_ET1MAC;
343 	}
344 	for (i = 0; i < 3; i++) {
345 		v = in[SPOFF(loc[0]) + i];
346 		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
347 	}
348 	if (out->revision < 3) { 	/* only rev 1-2 have et0, et1 */
349 		for (i = 0; i < 3; i++) {
350 			v = in[SPOFF(loc[1]) + i];
351 			*(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
352 		}
353 		for (i = 0; i < 3; i++) {
354 			v = in[SPOFF(loc[2]) + i];
355 			*(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
356 		}
357 	}
358 	SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
359 	SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
360 	     SSB_SPROM1_ETHPHY_ET1A_SHIFT);
361 	SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
362 	SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
363 	SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
364 	SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
365 	     SSB_SPROM1_BINF_CCODE_SHIFT);
366 	SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
367 	     SSB_SPROM1_BINF_ANTA_SHIFT);
368 	SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
369 	     SSB_SPROM1_BINF_ANTBG_SHIFT);
370 	SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
371 	SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
372 	SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
373 	SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
374 	SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
375 	SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
376 	SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
377 	SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
378 	     SSB_SPROM1_GPIOA_P1_SHIFT);
379 	SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
380 	SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
381 	     SSB_SPROM1_GPIOB_P3_SHIFT);
382 	SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
383 	     SSB_SPROM1_MAXPWR_A_SHIFT);
384 	SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
385 	SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
386 	     SSB_SPROM1_ITSSI_A_SHIFT);
387 	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
388 	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
389 	if (out->revision >= 2)
390 		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
391 
392 	/* Extract the antenna gain values. */
393 	gain = r123_extract_antgain(out->revision, in,
394 				    SSB_SPROM1_AGAIN_BG,
395 				    SSB_SPROM1_AGAIN_BG_SHIFT);
396 	out->antenna_gain.ghz24.a0 = gain;
397 	out->antenna_gain.ghz24.a1 = gain;
398 	out->antenna_gain.ghz24.a2 = gain;
399 	out->antenna_gain.ghz24.a3 = gain;
400 	gain = r123_extract_antgain(out->revision, in,
401 				    SSB_SPROM1_AGAIN_A,
402 				    SSB_SPROM1_AGAIN_A_SHIFT);
403 	out->antenna_gain.ghz5.a0 = gain;
404 	out->antenna_gain.ghz5.a1 = gain;
405 	out->antenna_gain.ghz5.a2 = gain;
406 	out->antenna_gain.ghz5.a3 = gain;
407 }
408 
409 /* Revs 4 5 and 8 have partially shared layout */
sprom_extract_r458(struct ssb_sprom * out,const u16 * in)410 static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
411 {
412 	SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
413 	     SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
414 	SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
415 	     SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
416 	SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
417 	     SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
418 	SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
419 	     SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
420 
421 	SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
422 	     SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
423 	SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
424 	     SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
425 	SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
426 	     SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
427 	SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
428 	     SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
429 
430 	SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
431 	     SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
432 	SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
433 	     SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
434 	SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
435 	     SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
436 	SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
437 	     SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
438 
439 	SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
440 	     SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
441 	SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
442 	     SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
443 	SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
444 	     SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
445 	SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
446 	     SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
447 }
448 
sprom_extract_r45(struct ssb_sprom * out,const u16 * in)449 static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
450 {
451 	int i;
452 	u16 v;
453 	u16 il0mac_offset;
454 
455 	if (out->revision == 4)
456 		il0mac_offset = SSB_SPROM4_IL0MAC;
457 	else
458 		il0mac_offset = SSB_SPROM5_IL0MAC;
459 	/* extract the MAC address */
460 	for (i = 0; i < 3; i++) {
461 		v = in[SPOFF(il0mac_offset) + i];
462 		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
463 	}
464 	SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
465 	SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
466 	     SSB_SPROM4_ETHPHY_ET1A_SHIFT);
467 	if (out->revision == 4) {
468 		SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
469 		SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
470 		SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
471 		SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
472 		SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
473 	} else {
474 		SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
475 		SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
476 		SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
477 		SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
478 		SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
479 	}
480 	SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
481 	     SSB_SPROM4_ANTAVAIL_A_SHIFT);
482 	SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
483 	     SSB_SPROM4_ANTAVAIL_BG_SHIFT);
484 	SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
485 	SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
486 	     SSB_SPROM4_ITSSI_BG_SHIFT);
487 	SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
488 	SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
489 	     SSB_SPROM4_ITSSI_A_SHIFT);
490 	if (out->revision == 4) {
491 		SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
492 		SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
493 		     SSB_SPROM4_GPIOA_P1_SHIFT);
494 		SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
495 		SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
496 		     SSB_SPROM4_GPIOB_P3_SHIFT);
497 	} else {
498 		SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0);
499 		SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1,
500 		     SSB_SPROM5_GPIOA_P1_SHIFT);
501 		SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0);
502 		SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3,
503 		     SSB_SPROM5_GPIOB_P3_SHIFT);
504 	}
505 
506 	/* Extract the antenna gain values. */
507 	SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
508 	     SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
509 	SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01,
510 	     SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
511 	SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23,
512 	     SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
513 	SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23,
514 	     SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
515 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
516 	       sizeof(out->antenna_gain.ghz5));
517 
518 	sprom_extract_r458(out, in);
519 
520 	/* TODO - get remaining rev 4 stuff needed */
521 }
522 
sprom_extract_r8(struct ssb_sprom * out,const u16 * in)523 static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
524 {
525 	int i;
526 	u16 v;
527 
528 	/* extract the MAC address */
529 	for (i = 0; i < 3; i++) {
530 		v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
531 		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
532 	}
533 	SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
534 	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
535 	SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
536 	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
537 	SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
538 	SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
539 	     SSB_SPROM8_ANTAVAIL_A_SHIFT);
540 	SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
541 	     SSB_SPROM8_ANTAVAIL_BG_SHIFT);
542 	SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
543 	SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
544 	     SSB_SPROM8_ITSSI_BG_SHIFT);
545 	SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
546 	SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
547 	     SSB_SPROM8_ITSSI_A_SHIFT);
548 	SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
549 	SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
550 	     SSB_SPROM8_MAXP_AL_SHIFT);
551 	SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
552 	SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
553 	     SSB_SPROM8_GPIOA_P1_SHIFT);
554 	SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
555 	SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
556 	     SSB_SPROM8_GPIOB_P3_SHIFT);
557 	SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
558 	SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
559 	     SSB_SPROM8_TRI5G_SHIFT);
560 	SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
561 	SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
562 	     SSB_SPROM8_TRI5GH_SHIFT);
563 	SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
564 	SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
565 	     SSB_SPROM8_RXPO5G_SHIFT);
566 	SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
567 	SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
568 	     SSB_SPROM8_RSSISMC2G_SHIFT);
569 	SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
570 	     SSB_SPROM8_RSSISAV2G_SHIFT);
571 	SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
572 	     SSB_SPROM8_BXA2G_SHIFT);
573 	SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
574 	SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
575 	     SSB_SPROM8_RSSISMC5G_SHIFT);
576 	SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
577 	     SSB_SPROM8_RSSISAV5G_SHIFT);
578 	SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
579 	     SSB_SPROM8_BXA5G_SHIFT);
580 	SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
581 	SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
582 	SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
583 	SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
584 	SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
585 	SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
586 	SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
587 	SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
588 	SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
589 	SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
590 	SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
591 	SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
592 	SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
593 	SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
594 	SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
595 	SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
596 	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
597 
598 	/* Extract the antenna gain values. */
599 	SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
600 	     SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
601 	SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01,
602 	     SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
603 	SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23,
604 	     SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
605 	SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23,
606 	     SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
607 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
608 	       sizeof(out->antenna_gain.ghz5));
609 
610 	sprom_extract_r458(out, in);
611 
612 	/* TODO - get remaining rev 8 stuff needed */
613 }
614 
sprom_extract(struct ssb_bus * bus,struct ssb_sprom * out,const u16 * in,u16 size)615 static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
616 			 const u16 *in, u16 size)
617 {
618 	memset(out, 0, sizeof(*out));
619 
620 	out->revision = in[size - 1] & 0x00FF;
621 	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
622 	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
623 	memset(out->et1mac, 0xFF, 6);
624 
625 	if ((bus->chip_id & 0xFF00) == 0x4400) {
626 		/* Workaround: The BCM44XX chip has a stupid revision
627 		 * number stored in the SPROM.
628 		 * Always extract r1. */
629 		out->revision = 1;
630 		ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
631 	}
632 
633 	switch (out->revision) {
634 	case 1:
635 	case 2:
636 	case 3:
637 		sprom_extract_r123(out, in);
638 		break;
639 	case 4:
640 	case 5:
641 		sprom_extract_r45(out, in);
642 		break;
643 	case 8:
644 		sprom_extract_r8(out, in);
645 		break;
646 	default:
647 		ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
648 			   " revision %d detected. Will extract"
649 			   " v1\n", out->revision);
650 		out->revision = 1;
651 		sprom_extract_r123(out, in);
652 	}
653 
654 	if (out->boardflags_lo == 0xFFFF)
655 		out->boardflags_lo = 0;  /* per specs */
656 	if (out->boardflags_hi == 0xFFFF)
657 		out->boardflags_hi = 0;  /* per specs */
658 
659 	return 0;
660 }
661 
ssb_pci_sprom_get(struct ssb_bus * bus,struct ssb_sprom * sprom)662 static int ssb_pci_sprom_get(struct ssb_bus *bus,
663 			     struct ssb_sprom *sprom)
664 {
665 	const struct ssb_sprom *fallback;
666 	int err;
667 	u16 *buf;
668 
669 	if (!ssb_is_sprom_available(bus)) {
670 		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
671 		return -ENODEV;
672 	}
673 	if (bus->chipco.dev) {	/* can be unavailable! */
674 		/*
675 		 * get SPROM offset: SSB_SPROM_BASE1 except for
676 		 * chipcommon rev >= 31 or chip ID is 0x4312 and
677 		 * chipcommon status & 3 == 2
678 		 */
679 		if (bus->chipco.dev->id.revision >= 31)
680 			bus->sprom_offset = SSB_SPROM_BASE31;
681 		else if (bus->chip_id == 0x4312 &&
682 			 (bus->chipco.status & 0x03) == 2)
683 			bus->sprom_offset = SSB_SPROM_BASE31;
684 		else
685 			bus->sprom_offset = SSB_SPROM_BASE1;
686 	} else {
687 		bus->sprom_offset = SSB_SPROM_BASE1;
688 	}
689 	ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
690 
691 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
692 	if (!buf)
693 		return -ENOMEM;
694 	bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
695 	sprom_do_read(bus, buf);
696 	err = sprom_check_crc(buf, bus->sprom_size);
697 	if (err) {
698 		/* try for a 440 byte SPROM - revision 4 and higher */
699 		kfree(buf);
700 		buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
701 			      GFP_KERNEL);
702 		if (!buf)
703 			return -ENOMEM;
704 		bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
705 		sprom_do_read(bus, buf);
706 		err = sprom_check_crc(buf, bus->sprom_size);
707 		if (err) {
708 			/* All CRC attempts failed.
709 			 * Maybe there is no SPROM on the device?
710 			 * If we have a fallback, use that. */
711 			fallback = ssb_get_fallback_sprom();
712 			if (fallback) {
713 				memcpy(sprom, fallback, sizeof(*sprom));
714 				err = 0;
715 				goto out_free;
716 			}
717 			ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
718 				   " SPROM CRC (corrupt SPROM)\n");
719 		}
720 	}
721 	err = sprom_extract(bus, sprom, buf, bus->sprom_size);
722 
723 out_free:
724 	kfree(buf);
725 	return err;
726 }
727 
ssb_pci_get_boardinfo(struct ssb_bus * bus,struct ssb_boardinfo * bi)728 static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
729 				  struct ssb_boardinfo *bi)
730 {
731 	pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID,
732 			     &bi->vendor);
733 	pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID,
734 			     &bi->type);
735 	pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
736 			     &bi->rev);
737 }
738 
ssb_pci_get_invariants(struct ssb_bus * bus,struct ssb_init_invariants * iv)739 int ssb_pci_get_invariants(struct ssb_bus *bus,
740 			   struct ssb_init_invariants *iv)
741 {
742 	int err;
743 
744 	err = ssb_pci_sprom_get(bus, &iv->sprom);
745 	if (err)
746 		goto out;
747 	ssb_pci_get_boardinfo(bus, &iv->boardinfo);
748 
749 out:
750 	return err;
751 }
752 
753 #ifdef CONFIG_SSB_DEBUG
ssb_pci_assert_buspower(struct ssb_bus * bus)754 static int ssb_pci_assert_buspower(struct ssb_bus *bus)
755 {
756 	if (likely(bus->powered_up))
757 		return 0;
758 
759 	printk(KERN_ERR PFX "FATAL ERROR: Bus powered down "
760 	       "while accessing PCI MMIO space\n");
761 	if (bus->power_warn_count <= 10) {
762 		bus->power_warn_count++;
763 		dump_stack();
764 	}
765 
766 	return -ENODEV;
767 }
768 #else /* DEBUG */
ssb_pci_assert_buspower(struct ssb_bus * bus)769 static inline int ssb_pci_assert_buspower(struct ssb_bus *bus)
770 {
771 	return 0;
772 }
773 #endif /* DEBUG */
774 
ssb_pci_read8(struct ssb_device * dev,u16 offset)775 static u8 ssb_pci_read8(struct ssb_device *dev, u16 offset)
776 {
777 	struct ssb_bus *bus = dev->bus;
778 
779 	if (unlikely(ssb_pci_assert_buspower(bus)))
780 		return 0xFF;
781 	if (unlikely(bus->mapped_device != dev)) {
782 		if (unlikely(ssb_pci_switch_core(bus, dev)))
783 			return 0xFF;
784 	}
785 	return ioread8(bus->mmio + offset);
786 }
787 
ssb_pci_read16(struct ssb_device * dev,u16 offset)788 static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset)
789 {
790 	struct ssb_bus *bus = dev->bus;
791 
792 	if (unlikely(ssb_pci_assert_buspower(bus)))
793 		return 0xFFFF;
794 	if (unlikely(bus->mapped_device != dev)) {
795 		if (unlikely(ssb_pci_switch_core(bus, dev)))
796 			return 0xFFFF;
797 	}
798 	return ioread16(bus->mmio + offset);
799 }
800 
ssb_pci_read32(struct ssb_device * dev,u16 offset)801 static u32 ssb_pci_read32(struct ssb_device *dev, u16 offset)
802 {
803 	struct ssb_bus *bus = dev->bus;
804 
805 	if (unlikely(ssb_pci_assert_buspower(bus)))
806 		return 0xFFFFFFFF;
807 	if (unlikely(bus->mapped_device != dev)) {
808 		if (unlikely(ssb_pci_switch_core(bus, dev)))
809 			return 0xFFFFFFFF;
810 	}
811 	return ioread32(bus->mmio + offset);
812 }
813 
814 #ifdef CONFIG_SSB_BLOCKIO
ssb_pci_block_read(struct ssb_device * dev,void * buffer,size_t count,u16 offset,u8 reg_width)815 static void ssb_pci_block_read(struct ssb_device *dev, void *buffer,
816 			       size_t count, u16 offset, u8 reg_width)
817 {
818 	struct ssb_bus *bus = dev->bus;
819 	void __iomem *addr = bus->mmio + offset;
820 
821 	if (unlikely(ssb_pci_assert_buspower(bus)))
822 		goto error;
823 	if (unlikely(bus->mapped_device != dev)) {
824 		if (unlikely(ssb_pci_switch_core(bus, dev)))
825 			goto error;
826 	}
827 	switch (reg_width) {
828 	case sizeof(u8):
829 		ioread8_rep(addr, buffer, count);
830 		break;
831 	case sizeof(u16):
832 		SSB_WARN_ON(count & 1);
833 		ioread16_rep(addr, buffer, count >> 1);
834 		break;
835 	case sizeof(u32):
836 		SSB_WARN_ON(count & 3);
837 		ioread32_rep(addr, buffer, count >> 2);
838 		break;
839 	default:
840 		SSB_WARN_ON(1);
841 	}
842 
843 	return;
844 error:
845 	memset(buffer, 0xFF, count);
846 }
847 #endif /* CONFIG_SSB_BLOCKIO */
848 
ssb_pci_write8(struct ssb_device * dev,u16 offset,u8 value)849 static void ssb_pci_write8(struct ssb_device *dev, u16 offset, u8 value)
850 {
851 	struct ssb_bus *bus = dev->bus;
852 
853 	if (unlikely(ssb_pci_assert_buspower(bus)))
854 		return;
855 	if (unlikely(bus->mapped_device != dev)) {
856 		if (unlikely(ssb_pci_switch_core(bus, dev)))
857 			return;
858 	}
859 	iowrite8(value, bus->mmio + offset);
860 }
861 
ssb_pci_write16(struct ssb_device * dev,u16 offset,u16 value)862 static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value)
863 {
864 	struct ssb_bus *bus = dev->bus;
865 
866 	if (unlikely(ssb_pci_assert_buspower(bus)))
867 		return;
868 	if (unlikely(bus->mapped_device != dev)) {
869 		if (unlikely(ssb_pci_switch_core(bus, dev)))
870 			return;
871 	}
872 	iowrite16(value, bus->mmio + offset);
873 }
874 
ssb_pci_write32(struct ssb_device * dev,u16 offset,u32 value)875 static void ssb_pci_write32(struct ssb_device *dev, u16 offset, u32 value)
876 {
877 	struct ssb_bus *bus = dev->bus;
878 
879 	if (unlikely(ssb_pci_assert_buspower(bus)))
880 		return;
881 	if (unlikely(bus->mapped_device != dev)) {
882 		if (unlikely(ssb_pci_switch_core(bus, dev)))
883 			return;
884 	}
885 	iowrite32(value, bus->mmio + offset);
886 }
887 
888 #ifdef CONFIG_SSB_BLOCKIO
ssb_pci_block_write(struct ssb_device * dev,const void * buffer,size_t count,u16 offset,u8 reg_width)889 static void ssb_pci_block_write(struct ssb_device *dev, const void *buffer,
890 				size_t count, u16 offset, u8 reg_width)
891 {
892 	struct ssb_bus *bus = dev->bus;
893 	void __iomem *addr = bus->mmio + offset;
894 
895 	if (unlikely(ssb_pci_assert_buspower(bus)))
896 		return;
897 	if (unlikely(bus->mapped_device != dev)) {
898 		if (unlikely(ssb_pci_switch_core(bus, dev)))
899 			return;
900 	}
901 	switch (reg_width) {
902 	case sizeof(u8):
903 		iowrite8_rep(addr, buffer, count);
904 		break;
905 	case sizeof(u16):
906 		SSB_WARN_ON(count & 1);
907 		iowrite16_rep(addr, buffer, count >> 1);
908 		break;
909 	case sizeof(u32):
910 		SSB_WARN_ON(count & 3);
911 		iowrite32_rep(addr, buffer, count >> 2);
912 		break;
913 	default:
914 		SSB_WARN_ON(1);
915 	}
916 }
917 #endif /* CONFIG_SSB_BLOCKIO */
918 
919 /* Not "static", as it's used in main.c */
920 const struct ssb_bus_ops ssb_pci_ops = {
921 	.read8		= ssb_pci_read8,
922 	.read16		= ssb_pci_read16,
923 	.read32		= ssb_pci_read32,
924 	.write8		= ssb_pci_write8,
925 	.write16	= ssb_pci_write16,
926 	.write32	= ssb_pci_write32,
927 #ifdef CONFIG_SSB_BLOCKIO
928 	.block_read	= ssb_pci_block_read,
929 	.block_write	= ssb_pci_block_write,
930 #endif
931 };
932 
ssb_pci_attr_sprom_show(struct device * pcidev,struct device_attribute * attr,char * buf)933 static ssize_t ssb_pci_attr_sprom_show(struct device *pcidev,
934 				       struct device_attribute *attr,
935 				       char *buf)
936 {
937 	struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev);
938 	struct ssb_bus *bus;
939 
940 	bus = ssb_pci_dev_to_bus(pdev);
941 	if (!bus)
942 		return -ENODEV;
943 
944 	return ssb_attr_sprom_show(bus, buf, sprom_do_read);
945 }
946 
ssb_pci_attr_sprom_store(struct device * pcidev,struct device_attribute * attr,const char * buf,size_t count)947 static ssize_t ssb_pci_attr_sprom_store(struct device *pcidev,
948 					struct device_attribute *attr,
949 					const char *buf, size_t count)
950 {
951 	struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev);
952 	struct ssb_bus *bus;
953 
954 	bus = ssb_pci_dev_to_bus(pdev);
955 	if (!bus)
956 		return -ENODEV;
957 
958 	return ssb_attr_sprom_store(bus, buf, count,
959 				    sprom_check_crc, sprom_do_write);
960 }
961 
962 static DEVICE_ATTR(ssb_sprom, 0600,
963 		   ssb_pci_attr_sprom_show,
964 		   ssb_pci_attr_sprom_store);
965 
ssb_pci_exit(struct ssb_bus * bus)966 void ssb_pci_exit(struct ssb_bus *bus)
967 {
968 	struct pci_dev *pdev;
969 
970 	if (bus->bustype != SSB_BUSTYPE_PCI)
971 		return;
972 
973 	pdev = bus->host_pci;
974 	device_remove_file(&pdev->dev, &dev_attr_ssb_sprom);
975 }
976 
ssb_pci_init(struct ssb_bus * bus)977 int ssb_pci_init(struct ssb_bus *bus)
978 {
979 	struct pci_dev *pdev;
980 	int err;
981 
982 	if (bus->bustype != SSB_BUSTYPE_PCI)
983 		return 0;
984 
985 	pdev = bus->host_pci;
986 	mutex_init(&bus->sprom_mutex);
987 	err = device_create_file(&pdev->dev, &dev_attr_ssb_sprom);
988 	if (err)
989 		goto out;
990 
991 out:
992 	return err;
993 }
994