1/* 2 * wof.S: Sparc window overflow handler. 3 * 4 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) 5 */ 6 7#include <asm/contregs.h> 8#include <asm/page.h> 9#include <asm/ptrace.h> 10#include <asm/psr.h> 11#include <asm/smp.h> 12#include <asm/asi.h> 13#include <asm/winmacro.h> 14#include <asm/asmmacro.h> 15#include <asm/thread_info.h> 16 17/* WARNING: This routine is hairy and _very_ complicated, but it 18 * must be as fast as possible as it handles the allocation 19 * of register windows to the user and kernel. If you touch 20 * this code be _very_ careful as many other pieces of the 21 * kernel depend upon how this code behaves. You have been 22 * duly warned... 23 */ 24 25/* We define macro's for registers which have a fixed 26 * meaning throughout this entire routine. The 'T' in 27 * the comments mean that the register can only be 28 * accessed when in the 'trap' window, 'G' means 29 * accessible in any window. Do not change these registers 30 * after they have been set, until you are ready to return 31 * from the trap. 32 */ 33#define t_psr l0 /* %psr at trap time T */ 34#define t_pc l1 /* PC for trap return T */ 35#define t_npc l2 /* NPC for trap return T */ 36#define t_wim l3 /* %wim at trap time T */ 37#define saved_g5 l5 /* Global save register T */ 38#define saved_g6 l6 /* Global save register T */ 39#define curptr g6 /* Gets set to 'current' then stays G */ 40 41/* Now registers whose values can change within the handler. */ 42#define twin_tmp l4 /* Temp reg, only usable in trap window T */ 43#define glob_tmp g5 /* Global temporary reg, usable anywhere G */ 44 45 .text 46 .align 4 47 /* BEGINNING OF PATCH INSTRUCTIONS */ 48 /* On a 7-window Sparc the boot code patches spnwin_* 49 * instructions with the following ones. 50 */ 51 .globl spnwin_patch1_7win, spnwin_patch2_7win, spnwin_patch3_7win 52spnwin_patch1_7win: sll %t_wim, 6, %glob_tmp 53spnwin_patch2_7win: and %glob_tmp, 0x7f, %glob_tmp 54spnwin_patch3_7win: and %twin_tmp, 0x7f, %twin_tmp 55 /* END OF PATCH INSTRUCTIONS */ 56 57 /* The trap entry point has done the following: 58 * 59 * rd %psr, %l0 60 * rd %wim, %l3 61 * b spill_window_entry 62 * andcc %l0, PSR_PS, %g0 63 */ 64 65 /* Datum current_thread_info->uwinmask contains at all times a bitmask 66 * where if any user windows are active, at least one bit will 67 * be set in to mask. If no user windows are active, the bitmask 68 * will be all zeroes. 69 */ 70 .globl spill_window_entry 71 .globl spnwin_patch1, spnwin_patch2, spnwin_patch3 72spill_window_entry: 73 /* LOCATION: Trap Window */ 74 75 mov %g5, %saved_g5 ! save away global temp register 76 mov %g6, %saved_g6 ! save away 'current' ptr register 77 78 /* Compute what the new %wim will be if we save the 79 * window properly in this trap handler. 80 * 81 * newwim = ((%wim>>1) | (%wim<<(nwindows - 1))); 82 */ 83 srl %t_wim, 0x1, %twin_tmp 84spnwin_patch1: sll %t_wim, 7, %glob_tmp 85 or %glob_tmp, %twin_tmp, %glob_tmp 86spnwin_patch2: and %glob_tmp, 0xff, %glob_tmp 87 88 /* The trap entry point has set the condition codes 89 * up for us to see if this is from user or kernel. 90 * Get the load of 'curptr' out of the way. 91 */ 92 LOAD_CURRENT(curptr, twin_tmp) 93 94 andcc %t_psr, PSR_PS, %g0 95 be,a spwin_fromuser ! all user wins, branch 96 save %g0, %g0, %g0 ! Go where saving will occur 97 98 /* See if any user windows are active in the set. */ 99 ld [%curptr + TI_UWINMASK], %twin_tmp ! grab win mask 100 orcc %g0, %twin_tmp, %g0 ! check for set bits 101 bne spwin_exist_uwins ! yep, there are some 102 andn %twin_tmp, %glob_tmp, %twin_tmp ! compute new uwinmask 103 104 /* Save into the window which must be saved and do it. 105 * Basically if we are here, this means that we trapped 106 * from kernel mode with only kernel windows in the register 107 * file. 108 */ 109 save %g0, %g0, %g0 ! save into the window to stash away 110 wr %glob_tmp, 0x0, %wim ! set new %wim, this is safe now 111 112spwin_no_userwins_from_kernel: 113 /* LOCATION: Window to be saved */ 114 115 STORE_WINDOW(sp) ! stash the window 116 restore %g0, %g0, %g0 ! go back into trap window 117 118 /* LOCATION: Trap window */ 119 mov %saved_g5, %g5 ! restore %glob_tmp 120 mov %saved_g6, %g6 ! restore %curptr 121 wr %t_psr, 0x0, %psr ! restore condition codes in %psr 122 WRITE_PAUSE ! waste some time 123 jmp %t_pc ! Return from trap 124 rett %t_npc ! we are done 125 126spwin_exist_uwins: 127 /* LOCATION: Trap window */ 128 129 /* Wow, user windows have to be dealt with, this is dirty 130 * and messy as all hell. And difficult to follow if you 131 * are approaching the infamous register window trap handling 132 * problem for the first time. DON'T LOOK! 133 * 134 * Note that how the execution path works out, the new %wim 135 * will be left for us in the global temporary register, 136 * %glob_tmp. We cannot set the new %wim first because we 137 * need to save into the appropriate window without inducing 138 * a trap (traps are off, we'd get a watchdog wheee)... 139 * But first, store the new user window mask calculated 140 * above. 141 */ 142 st %twin_tmp, [%curptr + TI_UWINMASK] 143 save %g0, %g0, %g0 ! Go to where the saving will occur 144 145spwin_fromuser: 146 /* LOCATION: Window to be saved */ 147 wr %glob_tmp, 0x0, %wim ! Now it is safe to set new %wim 148 149 /* LOCATION: Window to be saved */ 150 151 /* This instruction branches to a routine which will check 152 * to validity of the users stack pointer by whatever means 153 * are necessary. This means that this is architecture 154 * specific and thus this branch instruction will need to 155 * be patched at boot time once the machine type is known. 156 * This routine _shall not_ touch %curptr under any 157 * circumstances whatsoever! It will branch back to the 158 * label 'spwin_good_ustack' if the stack is ok but still 159 * needs to be dumped (SRMMU for instance will not need to 160 * do this) or 'spwin_finish_up' if the stack is ok and the 161 * registers have already been saved. If the stack is found 162 * to be bogus for some reason the routine shall branch to 163 * the label 'spwin_user_stack_is_bolixed' which will take 164 * care of things at that point. 165 */ 166 .globl spwin_mmu_patchme 167spwin_mmu_patchme: b spwin_sun4c_stackchk 168 andcc %sp, 0x7, %g0 169 170spwin_good_ustack: 171 /* LOCATION: Window to be saved */ 172 173 /* The users stack is ok and we can safely save it at 174 * %sp. 175 */ 176 STORE_WINDOW(sp) 177 178spwin_finish_up: 179 restore %g0, %g0, %g0 /* Back to trap window. */ 180 181 /* LOCATION: Trap window */ 182 183 /* We have spilled successfully, and we have properly stored 184 * the appropriate window onto the stack. 185 */ 186 187 /* Restore saved globals */ 188 mov %saved_g5, %g5 189 mov %saved_g6, %g6 190 191 wr %t_psr, 0x0, %psr 192 WRITE_PAUSE 193 jmp %t_pc 194 rett %t_npc 195 196spwin_user_stack_is_bolixed: 197 /* LOCATION: Window to be saved */ 198 199 /* Wheee, user has trashed his/her stack. We have to decide 200 * how to proceed based upon whether we came from kernel mode 201 * or not. If we came from kernel mode, toss the window into 202 * a special buffer and proceed, the kernel _needs_ a window 203 * and we could be in an interrupt handler so timing is crucial. 204 * If we came from user land we build a full stack frame and call 205 * c-code to gun down the process. 206 */ 207 rd %psr, %glob_tmp 208 andcc %glob_tmp, PSR_PS, %g0 209 bne spwin_bad_ustack_from_kernel 210 nop 211 212 /* Oh well, throw this one window into the per-task window 213 * buffer, the first one. 214 */ 215 st %sp, [%curptr + TI_RWIN_SPTRS] 216 STORE_WINDOW(curptr + TI_REG_WINDOW) 217 restore %g0, %g0, %g0 218 219 /* LOCATION: Trap Window */ 220 221 /* Back in the trap window, update winbuffer save count. */ 222 mov 1, %twin_tmp 223 st %twin_tmp, [%curptr + TI_W_SAVED] 224 225 /* Compute new user window mask. What we are basically 226 * doing is taking two windows, the invalid one at trap 227 * time and the one we attempted to throw onto the users 228 * stack, and saying that everything else is an ok user 229 * window. umask = ((~(%t_wim | %wim)) & valid_wim_bits) 230 */ 231 rd %wim, %twin_tmp 232 or %twin_tmp, %t_wim, %twin_tmp 233 not %twin_tmp 234spnwin_patch3: and %twin_tmp, 0xff, %twin_tmp ! patched on 7win Sparcs 235 st %twin_tmp, [%curptr + TI_UWINMASK] 236 237#define STACK_OFFSET (THREAD_SIZE - TRACEREG_SZ - STACKFRAME_SZ) 238 239 sethi %hi(STACK_OFFSET), %sp 240 or %sp, %lo(STACK_OFFSET), %sp 241 add %curptr, %sp, %sp 242 243 /* Restore the saved globals and build a pt_regs frame. */ 244 mov %saved_g5, %g5 245 mov %saved_g6, %g6 246 STORE_PT_ALL(sp, t_psr, t_pc, t_npc, g1) 247 248 sethi %hi(STACK_OFFSET), %g6 249 or %g6, %lo(STACK_OFFSET), %g6 250 sub %sp, %g6, %g6 ! curptr 251 252 /* Turn on traps and call c-code to deal with it. */ 253 wr %t_psr, PSR_ET, %psr 254 nop 255 call window_overflow_fault 256 nop 257 258 /* Return from trap if C-code actually fixes things, if it 259 * doesn't then we never get this far as the process will 260 * be given the look of death from Commander Peanut. 261 */ 262 b ret_trap_entry 263 clr %l6 264 265spwin_bad_ustack_from_kernel: 266 /* LOCATION: Window to be saved */ 267 268 /* The kernel provoked a spill window trap, but the window we 269 * need to save is a user one and the process has trashed its 270 * stack pointer. We need to be quick, so we throw it into 271 * a per-process window buffer until we can properly handle 272 * this later on. 273 */ 274 SAVE_BOLIXED_USER_STACK(curptr, glob_tmp) 275 restore %g0, %g0, %g0 276 277 /* LOCATION: Trap window */ 278 279 /* Restore globals, condition codes in the %psr and 280 * return from trap. Note, restoring %g6 when returning 281 * to kernel mode is not necessarily these days. ;-) 282 */ 283 mov %saved_g5, %g5 284 mov %saved_g6, %g6 285 286 wr %t_psr, 0x0, %psr 287 WRITE_PAUSE 288 289 jmp %t_pc 290 rett %t_npc 291 292/* Undefine the register macros which would only cause trouble 293 * if used below. This helps find 'stupid' coding errors that 294 * produce 'odd' behavior. The routines below are allowed to 295 * make usage of glob_tmp and t_psr so we leave them defined. 296 */ 297#undef twin_tmp 298#undef curptr 299#undef t_pc 300#undef t_npc 301#undef t_wim 302#undef saved_g5 303#undef saved_g6 304 305/* Now come the per-architecture window overflow stack checking routines. 306 * As noted above %curptr cannot be touched by this routine at all. 307 */ 308 309spwin_sun4c_stackchk: 310 /* LOCATION: Window to be saved on the stack */ 311 312 /* See if the stack is in the address space hole but first, 313 * check results of callers andcc %sp, 0x7, %g0 314 */ 315 be 1f 316 sra %sp, 29, %glob_tmp 317 318 rd %psr, %glob_tmp 319 b spwin_user_stack_is_bolixed + 0x4 320 nop 321 3221: 323 add %glob_tmp, 0x1, %glob_tmp 324 andncc %glob_tmp, 0x1, %g0 325 be 1f 326 and %sp, 0xfff, %glob_tmp ! delay slot 327 328 rd %psr, %glob_tmp 329 b spwin_user_stack_is_bolixed + 0x4 330 nop 331 332 /* See if our dump area will be on more than one 333 * page. 334 */ 3351: 336 add %glob_tmp, 0x38, %glob_tmp 337 andncc %glob_tmp, 0xff8, %g0 338 be spwin_sun4c_onepage ! only one page to check 339 lda [%sp] ASI_PTE, %glob_tmp ! have to check first page anyways 340 341spwin_sun4c_twopages: 342 /* Is first page ok permission wise? */ 343 srl %glob_tmp, 29, %glob_tmp 344 cmp %glob_tmp, 0x6 345 be 1f 346 add %sp, 0x38, %glob_tmp /* Is second page in vma hole? */ 347 348 rd %psr, %glob_tmp 349 b spwin_user_stack_is_bolixed + 0x4 350 nop 351 3521: 353 sra %glob_tmp, 29, %glob_tmp 354 add %glob_tmp, 0x1, %glob_tmp 355 andncc %glob_tmp, 0x1, %g0 356 be 1f 357 add %sp, 0x38, %glob_tmp 358 359 rd %psr, %glob_tmp 360 b spwin_user_stack_is_bolixed + 0x4 361 nop 362 3631: 364 lda [%glob_tmp] ASI_PTE, %glob_tmp 365 366spwin_sun4c_onepage: 367 srl %glob_tmp, 29, %glob_tmp 368 cmp %glob_tmp, 0x6 ! can user write to it? 369 be spwin_good_ustack ! success 370 nop 371 372 rd %psr, %glob_tmp 373 b spwin_user_stack_is_bolixed + 0x4 374 nop 375 376 /* This is a generic SRMMU routine. As far as I know this 377 * works for all current v8/srmmu implementations, we'll 378 * see... 379 */ 380 .globl spwin_srmmu_stackchk 381spwin_srmmu_stackchk: 382 /* LOCATION: Window to be saved on the stack */ 383 384 /* Because of SMP concerns and speed we play a trick. 385 * We disable fault traps in the MMU control register, 386 * Execute the stores, then check the fault registers 387 * to see what happens. I can hear Linus now 388 * "disgusting... broken hardware...". 389 * 390 * But first, check to see if the users stack has ended 391 * up in kernel vma, then we would succeed for the 'wrong' 392 * reason... ;( Note that the 'sethi' below assumes the 393 * kernel is page aligned, which should always be the case. 394 */ 395 /* Check results of callers andcc %sp, 0x7, %g0 */ 396 bne spwin_user_stack_is_bolixed 397 sethi %hi(PAGE_OFFSET), %glob_tmp 398 cmp %glob_tmp, %sp 399 bleu spwin_user_stack_is_bolixed 400 mov AC_M_SFSR, %glob_tmp 401 402 /* Clear the fault status and turn on the no_fault bit. */ 403 lda [%glob_tmp] ASI_M_MMUREGS, %g0 ! eat SFSR 404 405 lda [%g0] ASI_M_MMUREGS, %glob_tmp ! read MMU control 406 or %glob_tmp, 0x2, %glob_tmp ! or in no_fault bit 407 sta %glob_tmp, [%g0] ASI_M_MMUREGS ! set it 408 409 /* Dump the registers and cross fingers. */ 410 STORE_WINDOW(sp) 411 412 /* Clear the no_fault bit and check the status. */ 413 andn %glob_tmp, 0x2, %glob_tmp 414 sta %glob_tmp, [%g0] ASI_M_MMUREGS 415 416 mov AC_M_SFAR, %glob_tmp 417 lda [%glob_tmp] ASI_M_MMUREGS, %g0 418 419 mov AC_M_SFSR, %glob_tmp 420 lda [%glob_tmp] ASI_M_MMUREGS, %glob_tmp 421 andcc %glob_tmp, 0x2, %g0 ! did we fault? 422 be,a spwin_finish_up + 0x4 ! cool beans, success 423 restore %g0, %g0, %g0 424 425 rd %psr, %glob_tmp 426 b spwin_user_stack_is_bolixed + 0x4 ! we faulted, ugh 427 nop 428