1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
3 */
4
5 #ifndef _DPU_HW_PINGPONG_H
6 #define _DPU_HW_PINGPONG_H
7
8 #include "dpu_hw_catalog.h"
9 #include "dpu_hw_mdss.h"
10 #include "dpu_hw_util.h"
11 #include "dpu_hw_blk.h"
12
13 #define DITHER_MATRIX_SZ 16
14
15 struct dpu_hw_pingpong;
16
17 struct dpu_hw_tear_check {
18 /*
19 * This is ratio of MDP VSYNC clk freq(Hz) to
20 * refresh rate divided by no of lines
21 */
22 u32 vsync_count;
23 u32 sync_cfg_height;
24 u32 vsync_init_val;
25 u32 sync_threshold_start;
26 u32 sync_threshold_continue;
27 u32 start_pos;
28 u32 rd_ptr_irq;
29 u8 hw_vsync_mode;
30 };
31
32 struct dpu_hw_pp_vsync_info {
33 u32 rd_ptr_init_val; /* value of rd pointer at vsync edge */
34 u32 rd_ptr_frame_count; /* num frames sent since enabling interface */
35 u32 rd_ptr_line_count; /* current line on panel (rd ptr) */
36 u32 wr_ptr_line_count; /* current line within pp fifo (wr ptr) */
37 };
38
39 /**
40 * struct dpu_hw_dither_cfg - dither feature structure
41 * @flags: for customizing operations
42 * @temporal_en: temperal dither enable
43 * @c0_bitdepth: c0 component bit depth
44 * @c1_bitdepth: c1 component bit depth
45 * @c2_bitdepth: c2 component bit depth
46 * @c3_bitdepth: c2 component bit depth
47 * @matrix: dither strength matrix
48 */
49 struct dpu_hw_dither_cfg {
50 u64 flags;
51 u32 temporal_en;
52 u32 c0_bitdepth;
53 u32 c1_bitdepth;
54 u32 c2_bitdepth;
55 u32 c3_bitdepth;
56 u32 matrix[DITHER_MATRIX_SZ];
57 };
58
59 /**
60 *
61 * struct dpu_hw_pingpong_ops : Interface to the pingpong Hw driver functions
62 * Assumption is these functions will be called after clocks are enabled
63 * @setup_tearcheck : program tear check values
64 * @enable_tearcheck : enables tear check
65 * @get_vsync_info : retries timing info of the panel
66 * @setup_autorefresh : configure and enable the autorefresh config
67 * @get_autorefresh : retrieve autorefresh config from hardware
68 * @setup_dither : function to program the dither hw block
69 * @get_line_count: obtain current vertical line counter
70 */
71 struct dpu_hw_pingpong_ops {
72 /**
73 * enables vysnc generation and sets up init value of
74 * read pointer and programs the tear check cofiguration
75 */
76 int (*setup_tearcheck)(struct dpu_hw_pingpong *pp,
77 struct dpu_hw_tear_check *cfg);
78
79 /**
80 * enables tear check block
81 */
82 int (*enable_tearcheck)(struct dpu_hw_pingpong *pp,
83 bool enable);
84
85 /**
86 * read, modify, write to either set or clear listening to external TE
87 * @Return: 1 if TE was originally connected, 0 if not, or -ERROR
88 */
89 int (*connect_external_te)(struct dpu_hw_pingpong *pp,
90 bool enable_external_te);
91
92 /**
93 * provides the programmed and current
94 * line_count
95 */
96 int (*get_vsync_info)(struct dpu_hw_pingpong *pp,
97 struct dpu_hw_pp_vsync_info *info);
98
99 /**
100 * configure and enable the autorefresh config
101 */
102 void (*setup_autorefresh)(struct dpu_hw_pingpong *pp,
103 u32 frame_count, bool enable);
104
105 /**
106 * retrieve autorefresh config from hardware
107 */
108 bool (*get_autorefresh)(struct dpu_hw_pingpong *pp,
109 u32 *frame_count);
110
111 /**
112 * poll until write pointer transmission starts
113 * @Return: 0 on success, -ETIMEDOUT on timeout
114 */
115 int (*poll_timeout_wr_ptr)(struct dpu_hw_pingpong *pp, u32 timeout_us);
116
117 /**
118 * Obtain current vertical line counter
119 */
120 u32 (*get_line_count)(struct dpu_hw_pingpong *pp);
121
122 /**
123 * Setup dither matix for pingpong block
124 */
125 void (*setup_dither)(struct dpu_hw_pingpong *pp,
126 struct dpu_hw_dither_cfg *cfg);
127 /**
128 * Enable DSC
129 */
130 int (*enable_dsc)(struct dpu_hw_pingpong *pp);
131
132 /**
133 * Disable DSC
134 */
135 void (*disable_dsc)(struct dpu_hw_pingpong *pp);
136
137 /**
138 * Setup DSC
139 */
140 int (*setup_dsc)(struct dpu_hw_pingpong *pp);
141 };
142
143 struct dpu_hw_merge_3d;
144
145 struct dpu_hw_pingpong {
146 struct dpu_hw_blk base;
147 struct dpu_hw_blk_reg_map hw;
148
149 /* pingpong */
150 enum dpu_pingpong idx;
151 const struct dpu_pingpong_cfg *caps;
152 struct dpu_hw_merge_3d *merge_3d;
153
154 /* ops */
155 struct dpu_hw_pingpong_ops ops;
156 };
157
158 /**
159 * to_dpu_hw_pingpong - convert base object dpu_hw_base to container
160 * @hw: Pointer to base hardware block
161 * return: Pointer to hardware block container
162 */
to_dpu_hw_pingpong(struct dpu_hw_blk * hw)163 static inline struct dpu_hw_pingpong *to_dpu_hw_pingpong(struct dpu_hw_blk *hw)
164 {
165 return container_of(hw, struct dpu_hw_pingpong, base);
166 }
167
168 /**
169 * dpu_hw_pingpong_init - initializes the pingpong driver for the passed
170 * pingpong idx.
171 * @idx: Pingpong index for which driver object is required
172 * @addr: Mapped register io address of MDP
173 * @m: Pointer to mdss catalog data
174 * Returns: Error code or allocated dpu_hw_pingpong context
175 */
176 struct dpu_hw_pingpong *dpu_hw_pingpong_init(enum dpu_pingpong idx,
177 void __iomem *addr,
178 const struct dpu_mdss_cfg *m);
179
180 /**
181 * dpu_hw_pingpong_destroy - destroys pingpong driver context
182 * should be called to free the context
183 * @pp: Pointer to PP driver context returned by dpu_hw_pingpong_init
184 */
185 void dpu_hw_pingpong_destroy(struct dpu_hw_pingpong *pp);
186
187 #endif /*_DPU_HW_PINGPONG_H */
188