1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * This header file contains public constants and structures used by
4 * the SCSI initiator code.
5 */
6 #ifndef _SCSI_SCSI_H
7 #define _SCSI_SCSI_H
8
9 #include <linux/types.h>
10 #include <linux/scatterlist.h>
11 #include <linux/kernel.h>
12 #include <scsi/scsi_common.h>
13 #include <scsi/scsi_proto.h>
14 #include <scsi/scsi_status.h>
15
16 struct scsi_cmnd;
17
18 enum scsi_timeouts {
19 SCSI_DEFAULT_EH_TIMEOUT = 10 * HZ,
20 };
21
22 /*
23 * DIX-capable adapters effectively support infinite chaining for the
24 * protection information scatterlist
25 */
26 #define SCSI_MAX_PROT_SG_SEGMENTS 0xFFFF
27
28 /*
29 * Special value for scanning to specify scanning or rescanning of all
30 * possible channels, (target) ids, or luns on a given shost.
31 */
32 #define SCAN_WILD_CARD ~0
33
34 /*
35 * standard mode-select header prepended to all mode-select commands
36 */
37
38 struct ccs_modesel_head {
39 __u8 _r1; /* reserved */
40 __u8 medium; /* device-specific medium type */
41 __u8 _r2; /* reserved */
42 __u8 block_desc_length; /* block descriptor length */
43 __u8 density; /* device-specific density code */
44 __u8 number_blocks_hi; /* number of blocks in this block desc */
45 __u8 number_blocks_med;
46 __u8 number_blocks_lo;
47 __u8 _r3;
48 __u8 block_length_hi; /* block length for blocks in this desc */
49 __u8 block_length_med;
50 __u8 block_length_lo;
51 };
52
53 /*
54 * The Well Known LUNS (SAM-3) in our int representation of a LUN
55 */
56 #define SCSI_W_LUN_BASE 0xc100
57 #define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
58 #define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
59 #define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
60
scsi_is_wlun(u64 lun)61 static inline int scsi_is_wlun(u64 lun)
62 {
63 return (lun & 0xff00) == SCSI_W_LUN_BASE;
64 }
65
66 /**
67 * scsi_status_is_check_condition - check the status return.
68 *
69 * @status: the status passed up from the driver (including host and
70 * driver components)
71 *
72 * This returns true if the status code is SAM_STAT_CHECK_CONDITION.
73 */
scsi_status_is_check_condition(int status)74 static inline int scsi_status_is_check_condition(int status)
75 {
76 if (status < 0)
77 return false;
78 status &= 0xfe;
79 return status == SAM_STAT_CHECK_CONDITION;
80 }
81
82 /*
83 * Extended message codes.
84 */
85 #define EXTENDED_MODIFY_DATA_POINTER 0x00
86 #define EXTENDED_SDTR 0x01
87 #define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
88 #define EXTENDED_WDTR 0x03
89 #define EXTENDED_PPR 0x04
90 #define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05
91
92 /*
93 * Internal return values.
94 */
95 enum scsi_disposition {
96 NEEDS_RETRY = 0x2001,
97 SUCCESS = 0x2002,
98 FAILED = 0x2003,
99 QUEUED = 0x2004,
100 SOFT_ERROR = 0x2005,
101 ADD_TO_MLQUEUE = 0x2006,
102 TIMEOUT_ERROR = 0x2007,
103 SCSI_RETURN_NOT_HANDLED = 0x2008,
104 FAST_IO_FAIL = 0x2009,
105 };
106
107 /*
108 * Midlevel queue return values.
109 */
110 #define SCSI_MLQUEUE_HOST_BUSY 0x1055
111 #define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
112 #define SCSI_MLQUEUE_EH_RETRY 0x1057
113 #define SCSI_MLQUEUE_TARGET_BUSY 0x1058
114
115 /*
116 * Use these to separate status msg and our bytes
117 *
118 * These are set by:
119 *
120 * status byte = set from target device
121 * msg_byte (unused)
122 * host_byte = set by low-level driver to indicate status.
123 */
124 #define host_byte(result) (((result) >> 16) & 0xff)
125
126 #define sense_class(sense) (((sense) >> 4) & 0x7)
127 #define sense_error(sense) ((sense) & 0xf)
128 #define sense_valid(sense) ((sense) & 0x80)
129
130 /*
131 * default timeouts
132 */
133 #define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ)
134 #define START_STOP_TIMEOUT (60 * HZ)
135 #define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ)
136 #define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ)
137 #define READ_DEFECT_DATA_TIMEOUT (60 * HZ )
138
139
140 #define IDENTIFY_BASE 0x80
141 #define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\
142 ((can_disconnect) ? 0x40 : 0) |\
143 ((lun) & 0x07))
144
145 /*
146 * struct scsi_device::scsi_level values. For SCSI devices other than those
147 * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
148 * where "resp" is a byte array of the response to an INQUIRY. The scsi_level
149 * variable is visible to the user via sysfs.
150 */
151
152 #define SCSI_UNKNOWN 0
153 #define SCSI_1 1
154 #define SCSI_1_CCS 2
155 #define SCSI_2 3
156 #define SCSI_3 4 /* SPC */
157 #define SCSI_SPC_2 5
158 #define SCSI_SPC_3 6
159
160 /*
161 * INQ PERIPHERAL QUALIFIERS
162 */
163 #define SCSI_INQ_PQ_CON 0x00
164 #define SCSI_INQ_PQ_NOT_CON 0x01
165 #define SCSI_INQ_PQ_NOT_CAP 0x03
166
167
168 /*
169 * Here are some scsi specific ioctl commands which are sometimes useful.
170 *
171 * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
172 */
173
174 /* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */
175 #define SCSI_IOCTL_GET_IDLUN 0x5382
176
177 /* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
178
179 /* Used to obtain the host number of a device. */
180 #define SCSI_IOCTL_PROBE_HOST 0x5385
181
182 /* Used to obtain the bus number for a device */
183 #define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
184
185 /* Used to obtain the PCI location of a device */
186 #define SCSI_IOCTL_GET_PCI 0x5387
187
188 /** scsi_status_is_good - check the status return.
189 *
190 * @status: the status passed up from the driver (including host and
191 * driver components)
192 *
193 * This returns true for known good conditions that may be treated as
194 * command completed normally
195 */
scsi_status_is_good(int status)196 static inline bool scsi_status_is_good(int status)
197 {
198 if (status < 0)
199 return false;
200
201 if (host_byte(status) == DID_NO_CONNECT)
202 return false;
203
204 /*
205 * FIXME: bit0 is listed as reserved in SCSI-2, but is
206 * significant in SCSI-3. For now, we follow the SCSI-2
207 * behaviour and ignore reserved bits.
208 */
209 status &= 0xfe;
210 return ((status == SAM_STAT_GOOD) ||
211 (status == SAM_STAT_CONDITION_MET) ||
212 /* Next two "intermediate" statuses are obsolete in SAM-4 */
213 (status == SAM_STAT_INTERMEDIATE) ||
214 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
215 /* FIXME: this is obsolete in SAM-3 */
216 (status == SAM_STAT_COMMAND_TERMINATED));
217 }
218
219 #endif /* _SCSI_SCSI_H */
220