1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _SCSI_SCSI_DEVICE_H
3 #define _SCSI_SCSI_DEVICE_H
4
5 #include <linux/list.h>
6 #include <linux/spinlock.h>
7 #include <linux/workqueue.h>
8 #include <linux/blk-mq.h>
9 #include <scsi/scsi.h>
10 #include <linux/atomic.h>
11 #include <linux/sbitmap.h>
12
13 struct bsg_device;
14 struct device;
15 struct request_queue;
16 struct scsi_cmnd;
17 struct scsi_lun;
18 struct scsi_sense_hdr;
19
20 typedef __u64 __bitwise blist_flags_t;
21
22 #define SCSI_SENSE_BUFFERSIZE 96
23
24 struct scsi_mode_data {
25 __u32 length;
26 __u16 block_descriptor_length;
27 __u8 medium_type;
28 __u8 device_specific;
29 __u8 header_length;
30 __u8 longlba:1;
31 };
32
33 /*
34 * sdev state: If you alter this, you also need to alter scsi_sysfs.c
35 * (for the ascii descriptions) and the state model enforcer:
36 * scsi_lib:scsi_device_set_state().
37 */
38 enum scsi_device_state {
39 SDEV_CREATED = 1, /* device created but not added to sysfs
40 * Only internal commands allowed (for inq) */
41 SDEV_RUNNING, /* device properly configured
42 * All commands allowed */
43 SDEV_CANCEL, /* beginning to delete device
44 * Only error handler commands allowed */
45 SDEV_DEL, /* device deleted
46 * no commands allowed */
47 SDEV_QUIESCE, /* Device quiescent. No block commands
48 * will be accepted, only specials (which
49 * originate in the mid-layer) */
50 SDEV_OFFLINE, /* Device offlined (by error handling or
51 * user request */
52 SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */
53 SDEV_BLOCK, /* Device blocked by scsi lld. No
54 * scsi commands from user or midlayer
55 * should be issued to the scsi
56 * lld. */
57 SDEV_CREATED_BLOCK, /* same as above but for created devices */
58 };
59
60 enum scsi_scan_mode {
61 SCSI_SCAN_INITIAL = 0,
62 SCSI_SCAN_RESCAN,
63 SCSI_SCAN_MANUAL,
64 };
65
66 enum scsi_device_event {
67 SDEV_EVT_MEDIA_CHANGE = 1, /* media has changed */
68 SDEV_EVT_INQUIRY_CHANGE_REPORTED, /* 3F 03 UA reported */
69 SDEV_EVT_CAPACITY_CHANGE_REPORTED, /* 2A 09 UA reported */
70 SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED, /* 38 07 UA reported */
71 SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED, /* 2A 01 UA reported */
72 SDEV_EVT_LUN_CHANGE_REPORTED, /* 3F 0E UA reported */
73 SDEV_EVT_ALUA_STATE_CHANGE_REPORTED, /* 2A 06 UA reported */
74 SDEV_EVT_POWER_ON_RESET_OCCURRED, /* 29 00 UA reported */
75
76 SDEV_EVT_FIRST = SDEV_EVT_MEDIA_CHANGE,
77 SDEV_EVT_LAST = SDEV_EVT_POWER_ON_RESET_OCCURRED,
78
79 SDEV_EVT_MAXBITS = SDEV_EVT_LAST + 1
80 };
81
82 struct scsi_event {
83 enum scsi_device_event evt_type;
84 struct list_head node;
85
86 /* put union of data structures, for non-simple event types,
87 * here
88 */
89 };
90
91 /**
92 * struct scsi_vpd - SCSI Vital Product Data
93 * @rcu: For kfree_rcu().
94 * @len: Length in bytes of @data.
95 * @data: VPD data as defined in various T10 SCSI standard documents.
96 */
97 struct scsi_vpd {
98 struct rcu_head rcu;
99 int len;
100 unsigned char data[];
101 };
102
103 struct scsi_device {
104 struct Scsi_Host *host;
105 struct request_queue *request_queue;
106
107 /* the next two are protected by the host->host_lock */
108 struct list_head siblings; /* list of all devices on this host */
109 struct list_head same_target_siblings; /* just the devices sharing same target id */
110
111 struct sbitmap budget_map;
112 atomic_t device_blocked; /* Device returned QUEUE_FULL. */
113
114 atomic_t restarts;
115 spinlock_t list_lock;
116 struct list_head starved_entry;
117 unsigned short queue_depth; /* How deep of a queue we want */
118 unsigned short max_queue_depth; /* max queue depth */
119 unsigned short last_queue_full_depth; /* These two are used by */
120 unsigned short last_queue_full_count; /* scsi_track_queue_full() */
121 unsigned long last_queue_full_time; /* last queue full time */
122 unsigned long queue_ramp_up_period; /* ramp up period in jiffies */
123 #define SCSI_DEFAULT_RAMP_UP_PERIOD (120 * HZ)
124
125 unsigned long last_queue_ramp_up; /* last queue ramp up time */
126
127 unsigned int id, channel;
128 u64 lun;
129 unsigned int manufacturer; /* Manufacturer of device, for using
130 * vendor-specific cmd's */
131 unsigned sector_size; /* size in bytes */
132
133 void *hostdata; /* available to low-level driver */
134 unsigned char type;
135 char scsi_level;
136 char inq_periph_qual; /* PQ from INQUIRY data */
137 struct mutex inquiry_mutex;
138 unsigned char inquiry_len; /* valid bytes in 'inquiry' */
139 unsigned char * inquiry; /* INQUIRY response data */
140 const char * vendor; /* [back_compat] point into 'inquiry' ... */
141 const char * model; /* ... after scan; point to static string */
142 const char * rev; /* ... "nullnullnullnull" before scan */
143
144 #define SCSI_DEFAULT_VPD_LEN 255 /* default SCSI VPD page size (max) */
145 struct scsi_vpd __rcu *vpd_pg0;
146 struct scsi_vpd __rcu *vpd_pg83;
147 struct scsi_vpd __rcu *vpd_pg80;
148 struct scsi_vpd __rcu *vpd_pg89;
149 struct scsi_vpd __rcu *vpd_pgb0;
150 struct scsi_vpd __rcu *vpd_pgb1;
151 struct scsi_vpd __rcu *vpd_pgb2;
152
153 struct scsi_target *sdev_target;
154
155 blist_flags_t sdev_bflags; /* black/white flags as also found in
156 * scsi_devinfo.[hc]. For now used only to
157 * pass settings from slave_alloc to scsi
158 * core. */
159 unsigned int eh_timeout; /* Error handling timeout */
160
161 /*
162 * If true, let the high-level device driver (sd) manage the device
163 * power state for system suspend/resume (suspend to RAM and
164 * hibernation) operations.
165 */
166 unsigned manage_system_start_stop:1;
167
168 /*
169 * If true, let the high-level device driver (sd) manage the device
170 * power state for runtime device suspand and resume operations.
171 */
172 unsigned manage_runtime_start_stop:1;
173
174 /*
175 * If true, let the high-level device driver (sd) manage the device
176 * power state for system shutdown (power off) operations.
177 */
178 unsigned manage_shutdown:1;
179
180 /*
181 * If set and if the device is runtime suspended, ask the high-level
182 * device driver (sd) to force a runtime resume of the device.
183 */
184 unsigned force_runtime_start_on_system_start:1;
185
186 unsigned removable:1;
187 unsigned changed:1; /* Data invalid due to media change */
188 unsigned busy:1; /* Used to prevent races */
189 unsigned lockable:1; /* Able to prevent media removal */
190 unsigned locked:1; /* Media removal disabled */
191 unsigned borken:1; /* Tell the Seagate driver to be
192 * painfully slow on this device */
193 unsigned disconnect:1; /* can disconnect */
194 unsigned soft_reset:1; /* Uses soft reset option */
195 unsigned sdtr:1; /* Device supports SDTR messages */
196 unsigned wdtr:1; /* Device supports WDTR messages */
197 unsigned ppr:1; /* Device supports PPR messages */
198 unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */
199 unsigned simple_tags:1; /* simple queue tag messages are enabled */
200 unsigned was_reset:1; /* There was a bus reset on the bus for
201 * this device */
202 unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
203 * because we did a bus reset. */
204 unsigned use_10_for_rw:1; /* first try 10-byte read / write */
205 unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
206 unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */
207 unsigned read_before_ms:1; /* perform a READ before MODE SENSE */
208 unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */
209 unsigned no_write_same:1; /* no WRITE SAME command */
210 unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
211 unsigned use_16_for_sync:1; /* Use sync (16) over sync (10) */
212 unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
213 unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
214 unsigned skip_vpd_pages:1; /* do not read VPD pages */
215 unsigned try_vpd_pages:1; /* attempt to read VPD pages */
216 unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
217 unsigned no_start_on_add:1; /* do not issue start on add */
218 unsigned allow_restart:1; /* issue START_UNIT in error handler */
219 unsigned no_start_on_resume:1; /* Do not issue START_STOP_UNIT on resume */
220 unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
221 unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
222 unsigned select_no_atn:1;
223 unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */
224 unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */
225 unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */
226 unsigned last_sector_bug:1; /* do not use multisector accesses on
227 SD_LAST_BUGGY_SECTORS */
228 unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
229 unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
230 unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
231 unsigned security_supported:1; /* Supports Security Protocols */
232 unsigned is_visible:1; /* is the device visible in sysfs */
233 unsigned wce_default_on:1; /* Cache is ON by default */
234 unsigned no_dif:1; /* T10 PI (DIF) should be disabled */
235 unsigned broken_fua:1; /* Don't set FUA bit */
236 unsigned lun_in_cdb:1; /* Store LUN bits in CDB[1] */
237 unsigned unmap_limit_for_ws:1; /* Use the UNMAP limit for WRITE SAME */
238 unsigned rpm_autosuspend:1; /* Enable runtime autosuspend at device
239 * creation time */
240 unsigned ignore_media_change:1; /* Ignore MEDIA CHANGE on resume */
241 unsigned silence_suspend:1; /* Do not print runtime PM related messages */
242 unsigned no_vpd_size:1; /* No VPD size reported in header */
243
244 unsigned cdl_supported:1; /* Command duration limits supported */
245 unsigned cdl_enable:1; /* Enable/disable Command duration limits */
246
247 unsigned int queue_stopped; /* request queue is quiesced */
248 bool offline_already; /* Device offline message logged */
249
250 atomic_t disk_events_disable_depth; /* disable depth for disk events */
251
252 DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
253 DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
254 struct list_head event_list; /* asserted events */
255 struct work_struct event_work;
256
257 unsigned int max_device_blocked; /* what device_blocked counts down from */
258 #define SCSI_DEFAULT_DEVICE_BLOCKED 3
259
260 atomic_t iorequest_cnt;
261 atomic_t iodone_cnt;
262 atomic_t ioerr_cnt;
263 atomic_t iotmo_cnt;
264
265 struct device sdev_gendev,
266 sdev_dev;
267
268 struct work_struct requeue_work;
269
270 struct scsi_device_handler *handler;
271 void *handler_data;
272
273 size_t dma_drain_len;
274 void *dma_drain_buf;
275
276 unsigned int sg_timeout;
277 unsigned int sg_reserved_size;
278
279 struct bsg_device *bsg_dev;
280 unsigned char access_state;
281 struct mutex state_mutex;
282 enum scsi_device_state sdev_state;
283 struct task_struct *quiesced_by;
284 unsigned long sdev_data[];
285 } __attribute__((aligned(sizeof(unsigned long))));
286
287 #define to_scsi_device(d) \
288 container_of(d, struct scsi_device, sdev_gendev)
289 #define class_to_sdev(d) \
290 container_of(d, struct scsi_device, sdev_dev)
291 #define transport_class_to_sdev(class_dev) \
292 to_scsi_device(class_dev->parent)
293
294 #define sdev_dbg(sdev, fmt, a...) \
295 dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
296
297 /*
298 * like scmd_printk, but the device name is passed in
299 * as a string pointer
300 */
301 __printf(4, 5) void
302 sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
303 const char *, ...);
304
305 #define sdev_printk(l, sdev, fmt, a...) \
306 sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
307
308 __printf(3, 4) void
309 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
310
311 #define scmd_dbg(scmd, fmt, a...) \
312 do { \
313 struct request *__rq = scsi_cmd_to_rq((scmd)); \
314 \
315 if (__rq->q->disk) \
316 sdev_dbg((scmd)->device, "[%s] " fmt, \
317 __rq->q->disk->disk_name, ##a); \
318 else \
319 sdev_dbg((scmd)->device, fmt, ##a); \
320 } while (0)
321
322 enum scsi_target_state {
323 STARGET_CREATED = 1,
324 STARGET_RUNNING,
325 STARGET_REMOVE,
326 STARGET_CREATED_REMOVE,
327 STARGET_DEL,
328 };
329
330 /*
331 * scsi_target: representation of a scsi target, for now, this is only
332 * used for single_lun devices. If no one has active IO to the target,
333 * starget_sdev_user is NULL, else it points to the active sdev.
334 */
335 struct scsi_target {
336 struct scsi_device *starget_sdev_user;
337 struct list_head siblings;
338 struct list_head devices;
339 struct device dev;
340 struct kref reap_ref; /* last put renders target invisible */
341 unsigned int channel;
342 unsigned int id; /* target id ... replace
343 * scsi_device.id eventually */
344 unsigned int create:1; /* signal that it needs to be added */
345 unsigned int single_lun:1; /* Indicates we should only
346 * allow I/O to one of the luns
347 * for the device at a time. */
348 unsigned int pdt_1f_for_no_lun:1; /* PDT = 0x1f
349 * means no lun present. */
350 unsigned int no_report_luns:1; /* Don't use
351 * REPORT LUNS for scanning. */
352 unsigned int expecting_lun_change:1; /* A device has reported
353 * a 3F/0E UA, other devices on
354 * the same target will also. */
355 /* commands actually active on LLD. */
356 atomic_t target_busy;
357 atomic_t target_blocked;
358
359 /*
360 * LLDs should set this in the slave_alloc host template callout.
361 * If set to zero then there is not limit.
362 */
363 unsigned int can_queue;
364 unsigned int max_target_blocked;
365 #define SCSI_DEFAULT_TARGET_BLOCKED 3
366
367 char scsi_level;
368 enum scsi_target_state state;
369 void *hostdata; /* available to low-level driver */
370 unsigned long starget_data[]; /* for the transport */
371 /* starget_data must be the last element!!!! */
372 } __attribute__((aligned(sizeof(unsigned long))));
373
374 #define to_scsi_target(d) container_of(d, struct scsi_target, dev)
scsi_target(struct scsi_device * sdev)375 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
376 {
377 return to_scsi_target(sdev->sdev_gendev.parent);
378 }
379 #define transport_class_to_starget(class_dev) \
380 to_scsi_target(class_dev->parent)
381
382 #define starget_printk(prefix, starget, fmt, a...) \
383 dev_printk(prefix, &(starget)->dev, fmt, ##a)
384
385 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
386 uint, uint, u64, void *hostdata);
387 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
388 uint target, u64 lun);
389 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
390 extern void scsi_remove_device(struct scsi_device *);
391 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
392 void scsi_attach_vpd(struct scsi_device *sdev);
393 void scsi_cdl_check(struct scsi_device *sdev);
394 int scsi_cdl_enable(struct scsi_device *sdev, bool enable);
395
396 extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);
397 extern int __must_check scsi_device_get(struct scsi_device *);
398 extern void scsi_device_put(struct scsi_device *);
399 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
400 uint, uint, u64);
401 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
402 uint, uint, u64);
403 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
404 u64);
405 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
406 u64);
407 extern void starget_for_each_device(struct scsi_target *, void *,
408 void (*fn)(struct scsi_device *, void *));
409 extern void __starget_for_each_device(struct scsi_target *, void *,
410 void (*fn)(struct scsi_device *,
411 void *));
412
413 /* only exposed to implement shost_for_each_device */
414 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
415 struct scsi_device *);
416
417 /**
418 * shost_for_each_device - iterate over all devices of a host
419 * @sdev: the &struct scsi_device to use as a cursor
420 * @shost: the &struct scsi_host to iterate over
421 *
422 * Iterator that returns each device attached to @shost. This loop
423 * takes a reference on each device and releases it at the end. If
424 * you break out of the loop, you must call scsi_device_put(sdev).
425 */
426 #define shost_for_each_device(sdev, shost) \
427 for ((sdev) = __scsi_iterate_devices((shost), NULL); \
428 (sdev); \
429 (sdev) = __scsi_iterate_devices((shost), (sdev)))
430
431 /**
432 * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
433 * @sdev: the &struct scsi_device to use as a cursor
434 * @shost: the &struct scsi_host to iterate over
435 *
436 * Iterator that returns each device attached to @shost. It does _not_
437 * take a reference on the scsi_device, so the whole loop must be
438 * protected by shost->host_lock.
439 *
440 * Note: The only reason to use this is because you need to access the
441 * device list in interrupt context. Otherwise you really want to use
442 * shost_for_each_device instead.
443 */
444 #define __shost_for_each_device(sdev, shost) \
445 list_for_each_entry((sdev), &((shost)->__devices), siblings)
446
447 extern int scsi_change_queue_depth(struct scsi_device *, int);
448 extern int scsi_track_queue_full(struct scsi_device *, int);
449
450 extern int scsi_set_medium_removal(struct scsi_device *, char);
451
452 int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
453 int subpage, unsigned char *buffer, int len, int timeout,
454 int retries, struct scsi_mode_data *data,
455 struct scsi_sense_hdr *);
456 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
457 unsigned char *buffer, int len, int timeout,
458 int retries, struct scsi_mode_data *data,
459 struct scsi_sense_hdr *);
460 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
461 int retries, struct scsi_sense_hdr *sshdr);
462 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
463 int buf_len);
464 int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
465 unsigned int len, unsigned char opcode,
466 unsigned short sa);
467 extern int scsi_device_set_state(struct scsi_device *sdev,
468 enum scsi_device_state state);
469 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
470 gfp_t gfpflags);
471 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
472 extern void sdev_evt_send_simple(struct scsi_device *sdev,
473 enum scsi_device_event evt_type, gfp_t gfpflags);
474 extern int scsi_device_quiesce(struct scsi_device *sdev);
475 extern void scsi_device_resume(struct scsi_device *sdev);
476 extern void scsi_target_quiesce(struct scsi_target *);
477 extern void scsi_target_resume(struct scsi_target *);
478 extern void scsi_scan_target(struct device *parent, unsigned int channel,
479 unsigned int id, u64 lun,
480 enum scsi_scan_mode rescan);
481 extern void scsi_target_reap(struct scsi_target *);
482 void scsi_block_targets(struct Scsi_Host *shost, struct device *dev);
483 extern void scsi_target_unblock(struct device *, enum scsi_device_state);
484 extern void scsi_remove_target(struct device *);
485 extern const char *scsi_device_state_name(enum scsi_device_state);
486 extern int scsi_is_sdev_device(const struct device *);
487 extern int scsi_is_target_device(const struct device *);
488 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
489
490 /* Optional arguments to scsi_execute_cmd */
491 struct scsi_exec_args {
492 unsigned char *sense; /* sense buffer */
493 unsigned int sense_len; /* sense buffer len */
494 struct scsi_sense_hdr *sshdr; /* decoded sense header */
495 blk_mq_req_flags_t req_flags; /* BLK_MQ_REQ flags */
496 int scmd_flags; /* SCMD flags */
497 int *resid; /* residual length */
498 };
499
500 int scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd,
501 blk_opf_t opf, void *buffer, unsigned int bufflen,
502 int timeout, int retries,
503 const struct scsi_exec_args *args);
504
505 extern void sdev_disable_disk_events(struct scsi_device *sdev);
506 extern void sdev_enable_disk_events(struct scsi_device *sdev);
507 extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
508 extern int scsi_vpd_tpg_id(struct scsi_device *, int *);
509
510 #ifdef CONFIG_PM
511 extern int scsi_autopm_get_device(struct scsi_device *);
512 extern void scsi_autopm_put_device(struct scsi_device *);
513 #else
scsi_autopm_get_device(struct scsi_device * d)514 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
scsi_autopm_put_device(struct scsi_device * d)515 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
516 #endif /* CONFIG_PM */
517
scsi_device_reprobe(struct scsi_device * sdev)518 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
519 {
520 return device_reprobe(&sdev->sdev_gendev);
521 }
522
sdev_channel(struct scsi_device * sdev)523 static inline unsigned int sdev_channel(struct scsi_device *sdev)
524 {
525 return sdev->channel;
526 }
527
sdev_id(struct scsi_device * sdev)528 static inline unsigned int sdev_id(struct scsi_device *sdev)
529 {
530 return sdev->id;
531 }
532
533 #define scmd_id(scmd) sdev_id((scmd)->device)
534 #define scmd_channel(scmd) sdev_channel((scmd)->device)
535
536 /*
537 * checks for positions of the SCSI state machine
538 */
scsi_device_online(struct scsi_device * sdev)539 static inline int scsi_device_online(struct scsi_device *sdev)
540 {
541 return (sdev->sdev_state != SDEV_OFFLINE &&
542 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
543 sdev->sdev_state != SDEV_DEL);
544 }
scsi_device_blocked(struct scsi_device * sdev)545 static inline int scsi_device_blocked(struct scsi_device *sdev)
546 {
547 return sdev->sdev_state == SDEV_BLOCK ||
548 sdev->sdev_state == SDEV_CREATED_BLOCK;
549 }
scsi_device_created(struct scsi_device * sdev)550 static inline int scsi_device_created(struct scsi_device *sdev)
551 {
552 return sdev->sdev_state == SDEV_CREATED ||
553 sdev->sdev_state == SDEV_CREATED_BLOCK;
554 }
555
556 int scsi_internal_device_block_nowait(struct scsi_device *sdev);
557 int scsi_internal_device_unblock_nowait(struct scsi_device *sdev,
558 enum scsi_device_state new_state);
559
560 /* accessor functions for the SCSI parameters */
scsi_device_sync(struct scsi_device * sdev)561 static inline int scsi_device_sync(struct scsi_device *sdev)
562 {
563 return sdev->sdtr;
564 }
scsi_device_wide(struct scsi_device * sdev)565 static inline int scsi_device_wide(struct scsi_device *sdev)
566 {
567 return sdev->wdtr;
568 }
scsi_device_dt(struct scsi_device * sdev)569 static inline int scsi_device_dt(struct scsi_device *sdev)
570 {
571 return sdev->ppr;
572 }
scsi_device_dt_only(struct scsi_device * sdev)573 static inline int scsi_device_dt_only(struct scsi_device *sdev)
574 {
575 if (sdev->inquiry_len < 57)
576 return 0;
577 return (sdev->inquiry[56] & 0x0c) == 0x04;
578 }
scsi_device_ius(struct scsi_device * sdev)579 static inline int scsi_device_ius(struct scsi_device *sdev)
580 {
581 if (sdev->inquiry_len < 57)
582 return 0;
583 return sdev->inquiry[56] & 0x01;
584 }
scsi_device_qas(struct scsi_device * sdev)585 static inline int scsi_device_qas(struct scsi_device *sdev)
586 {
587 if (sdev->inquiry_len < 57)
588 return 0;
589 return sdev->inquiry[56] & 0x02;
590 }
scsi_device_enclosure(struct scsi_device * sdev)591 static inline int scsi_device_enclosure(struct scsi_device *sdev)
592 {
593 return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
594 }
595
scsi_device_protection(struct scsi_device * sdev)596 static inline int scsi_device_protection(struct scsi_device *sdev)
597 {
598 if (sdev->no_dif)
599 return 0;
600
601 return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
602 }
603
scsi_device_tpgs(struct scsi_device * sdev)604 static inline int scsi_device_tpgs(struct scsi_device *sdev)
605 {
606 return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
607 }
608
609 /**
610 * scsi_device_supports_vpd - test if a device supports VPD pages
611 * @sdev: the &struct scsi_device to test
612 *
613 * If the 'try_vpd_pages' flag is set it takes precedence.
614 * Otherwise we will assume VPD pages are supported if the
615 * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
616 */
scsi_device_supports_vpd(struct scsi_device * sdev)617 static inline int scsi_device_supports_vpd(struct scsi_device *sdev)
618 {
619 /* Attempt VPD inquiry if the device blacklist explicitly calls
620 * for it.
621 */
622 if (sdev->try_vpd_pages)
623 return 1;
624 /*
625 * Although VPD inquiries can go to SCSI-2 type devices,
626 * some USB ones crash on receiving them, and the pages
627 * we currently ask for are mandatory for SPC-2 and beyond
628 */
629 if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages)
630 return 1;
631 return 0;
632 }
633
scsi_device_busy(struct scsi_device * sdev)634 static inline int scsi_device_busy(struct scsi_device *sdev)
635 {
636 return sbitmap_weight(&sdev->budget_map);
637 }
638
639 #define MODULE_ALIAS_SCSI_DEVICE(type) \
640 MODULE_ALIAS("scsi:t-" __stringify(type) "*")
641 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
642
643 #endif /* _SCSI_SCSI_DEVICE_H */
644