1 /*
2  * sound/oss/sb_audio.c
3  *
4  * Audio routines for Sound Blaster compatible cards.
5  *
6  *
7  * Copyright (C) by Hannu Savolainen 1993-1997
8  *
9  * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
10  * Version 2 (June 1991). See the "COPYING" file distributed with this software
11  * for more info.
12  *
13  * Changes
14  *	Alan Cox	:	Formatting and clean ups
15  *
16  * Status
17  *	Mostly working. Weird uart bug causing irq storms
18  *
19  * Daniel J. Rodriksson: Changes to make sb16 work full duplex.
20  *                       Maybe other 16 bit cards in this code could behave
21  *                       the same.
22  * Chris Rankin:         Use spinlocks instead of CLI/STI
23  */
24 
25 #include <linux/spinlock.h>
26 
27 #include "sound_config.h"
28 
29 #include "sb_mixer.h"
30 #include "sb.h"
31 
32 #include "sb_ess.h"
33 
sb_audio_open(int dev,int mode)34 int sb_audio_open(int dev, int mode)
35 {
36 	sb_devc *devc = audio_devs[dev]->devc;
37 	unsigned long flags;
38 
39 	if (devc == NULL)
40 	{
41 		  printk(KERN_ERR "Sound Blaster: incomplete initialization.\n");
42 		  return -ENXIO;
43 	}
44 	if (devc->caps & SB_NO_RECORDING && mode & OPEN_READ)
45 	{
46 		if (mode == OPEN_READ)
47 			return -EPERM;
48 	}
49 	spin_lock_irqsave(&devc->lock, flags);
50 	if (devc->opened)
51 	{
52 		  spin_unlock_irqrestore(&devc->lock, flags);
53 		  return -EBUSY;
54 	}
55 	if (devc->dma16 != -1 && devc->dma16 != devc->dma8 && !devc->duplex)
56 	{
57 		if (sound_open_dma(devc->dma16, "Sound Blaster 16 bit"))
58 		{
59 		  	spin_unlock_irqrestore(&devc->lock, flags);
60 			return -EBUSY;
61 		}
62 	}
63 	devc->opened = mode;
64 	spin_unlock_irqrestore(&devc->lock, flags);
65 
66 	devc->irq_mode = IMODE_NONE;
67 	devc->irq_mode_16 = IMODE_NONE;
68 	devc->fullduplex = devc->duplex &&
69 		((mode & OPEN_READ) && (mode & OPEN_WRITE));
70 	sb_dsp_reset(devc);
71 
72 	/* At first glance this check isn't enough, some ESS chips might not
73 	 * have a RECLEV. However if they don't common_mixer_set will refuse
74 	 * cause devc->iomap has no register mapping for RECLEV
75 	 */
76 	if (devc->model == MDL_ESS) ess_mixer_reload (devc, SOUND_MIXER_RECLEV);
77 
78 	/* The ALS007 seems to require that the DSP be removed from the output */
79 	/* in order for recording to be activated properly.  This is done by   */
80 	/* setting the appropriate bits of the output control register 4ch to  */
81 	/* zero.  This code assumes that the output control registers are not  */
82 	/* used anywhere else and therefore the DSP bits are *always* ON for   */
83 	/* output and OFF for sampling.                                        */
84 
85 	if (devc->submodel == SUBMDL_ALS007)
86 	{
87 		if (mode & OPEN_READ)
88 			sb_setmixer(devc,ALS007_OUTPUT_CTRL2,
89 				sb_getmixer(devc,ALS007_OUTPUT_CTRL2) & 0xf9);
90 		else
91 			sb_setmixer(devc,ALS007_OUTPUT_CTRL2,
92 				sb_getmixer(devc,ALS007_OUTPUT_CTRL2) | 0x06);
93 	}
94 	return 0;
95 }
96 
sb_audio_close(int dev)97 void sb_audio_close(int dev)
98 {
99 	sb_devc *devc = audio_devs[dev]->devc;
100 
101 	/* fix things if mmap turned off fullduplex */
102 	if(devc->duplex
103 	   && !devc->fullduplex
104 	   && (devc->opened & OPEN_READ) && (devc->opened & OPEN_WRITE))
105 	{
106 		struct dma_buffparms *dmap_temp;
107 		dmap_temp = audio_devs[dev]->dmap_out;
108 		audio_devs[dev]->dmap_out = audio_devs[dev]->dmap_in;
109 		audio_devs[dev]->dmap_in = dmap_temp;
110 	}
111 	audio_devs[dev]->dmap_out->dma = devc->dma8;
112 	audio_devs[dev]->dmap_in->dma = ( devc->duplex ) ?
113 		devc->dma16 : devc->dma8;
114 
115 	if (devc->dma16 != -1 && devc->dma16 != devc->dma8 && !devc->duplex)
116 		sound_close_dma(devc->dma16);
117 
118 	/* For ALS007, turn DSP output back on if closing the device for read */
119 
120 	if ((devc->submodel == SUBMDL_ALS007) && (devc->opened & OPEN_READ))
121 	{
122 		sb_setmixer(devc,ALS007_OUTPUT_CTRL2,
123 			sb_getmixer(devc,ALS007_OUTPUT_CTRL2) | 0x06);
124 	}
125 	devc->opened = 0;
126 }
127 
sb_set_output_parms(int dev,unsigned long buf,int nr_bytes,int intrflag)128 static void sb_set_output_parms(int dev, unsigned long buf, int nr_bytes,
129 		    int intrflag)
130 {
131 	sb_devc *devc = audio_devs[dev]->devc;
132 
133 	if (!devc->fullduplex || devc->bits == AFMT_S16_LE)
134 	{
135 		devc->trg_buf = buf;
136 		devc->trg_bytes = nr_bytes;
137 		devc->trg_intrflag = intrflag;
138 		devc->irq_mode = IMODE_OUTPUT;
139 	}
140 	else
141 	{
142 		devc->trg_buf_16 = buf;
143 		devc->trg_bytes_16 = nr_bytes;
144 		devc->trg_intrflag_16 = intrflag;
145 		devc->irq_mode_16 = IMODE_OUTPUT;
146 	}
147 }
148 
sb_set_input_parms(int dev,unsigned long buf,int count,int intrflag)149 static void sb_set_input_parms(int dev, unsigned long buf, int count, int intrflag)
150 {
151 	sb_devc *devc = audio_devs[dev]->devc;
152 
153 	if (!devc->fullduplex || devc->bits != AFMT_S16_LE)
154 	{
155 		devc->trg_buf = buf;
156 		devc->trg_bytes = count;
157 		devc->trg_intrflag = intrflag;
158 		devc->irq_mode = IMODE_INPUT;
159 	}
160 	else
161 	{
162 		devc->trg_buf_16 = buf;
163 		devc->trg_bytes_16 = count;
164 		devc->trg_intrflag_16 = intrflag;
165 		devc->irq_mode_16 = IMODE_INPUT;
166 	}
167 }
168 
169 /*
170  * SB1.x compatible routines
171  */
172 
sb1_audio_output_block(int dev,unsigned long buf,int nr_bytes,int intrflag)173 static void sb1_audio_output_block(int dev, unsigned long buf, int nr_bytes, int intrflag)
174 {
175 	unsigned long flags;
176 	int count = nr_bytes;
177 	sb_devc *devc = audio_devs[dev]->devc;
178 
179 	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */
180 
181 	if (audio_devs[dev]->dmap_out->dma > 3)
182 		count >>= 1;
183 	count--;
184 
185 	devc->irq_mode = IMODE_OUTPUT;
186 
187 	spin_lock_irqsave(&devc->lock, flags);
188 	if (sb_dsp_command(devc, 0x14))		/* 8 bit DAC using DMA */
189 	{
190 		sb_dsp_command(devc, (unsigned char) (count & 0xff));
191 		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
192 	}
193 	else
194 		printk(KERN_WARNING "Sound Blaster:  unable to start DAC.\n");
195 	spin_unlock_irqrestore(&devc->lock, flags);
196 	devc->intr_active = 1;
197 }
198 
sb1_audio_start_input(int dev,unsigned long buf,int nr_bytes,int intrflag)199 static void sb1_audio_start_input(int dev, unsigned long buf, int nr_bytes, int intrflag)
200 {
201 	unsigned long flags;
202 	int count = nr_bytes;
203 	sb_devc *devc = audio_devs[dev]->devc;
204 
205 	/*
206 	 * Start a DMA input to the buffer pointed by dmaqtail
207 	 */
208 
209 	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */
210 
211 	if (audio_devs[dev]->dmap_out->dma > 3)
212 		count >>= 1;
213 	count--;
214 
215 	devc->irq_mode = IMODE_INPUT;
216 
217 	spin_lock_irqsave(&devc->lock, flags);
218 	if (sb_dsp_command(devc, 0x24))		/* 8 bit ADC using DMA */
219 	{
220 		sb_dsp_command(devc, (unsigned char) (count & 0xff));
221 		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
222 	}
223 	else
224 		printk(KERN_ERR "Sound Blaster:  unable to start ADC.\n");
225 	spin_unlock_irqrestore(&devc->lock, flags);
226 
227 	devc->intr_active = 1;
228 }
229 
sb1_audio_trigger(int dev,int bits)230 static void sb1_audio_trigger(int dev, int bits)
231 {
232 	sb_devc *devc = audio_devs[dev]->devc;
233 
234 	bits &= devc->irq_mode;
235 
236 	if (!bits)
237 		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
238 	else
239 	{
240 		switch (devc->irq_mode)
241 		{
242 			case IMODE_INPUT:
243 				sb1_audio_start_input(dev, devc->trg_buf, devc->trg_bytes,
244 						devc->trg_intrflag);
245 				break;
246 
247 			case IMODE_OUTPUT:
248 				sb1_audio_output_block(dev, devc->trg_buf, devc->trg_bytes,
249 						devc->trg_intrflag);
250 				break;
251 		}
252 	}
253 	devc->trigger_bits = bits;
254 }
255 
sb1_audio_prepare_for_input(int dev,int bsize,int bcount)256 static int sb1_audio_prepare_for_input(int dev, int bsize, int bcount)
257 {
258 	sb_devc *devc = audio_devs[dev]->devc;
259 	unsigned long flags;
260 
261 	spin_lock_irqsave(&devc->lock, flags);
262 	if (sb_dsp_command(devc, 0x40))
263 		sb_dsp_command(devc, devc->tconst);
264 	sb_dsp_command(devc, DSP_CMD_SPKOFF);
265 	spin_unlock_irqrestore(&devc->lock, flags);
266 
267 	devc->trigger_bits = 0;
268 	return 0;
269 }
270 
sb1_audio_prepare_for_output(int dev,int bsize,int bcount)271 static int sb1_audio_prepare_for_output(int dev, int bsize, int bcount)
272 {
273 	sb_devc *devc = audio_devs[dev]->devc;
274 	unsigned long flags;
275 
276 	spin_lock_irqsave(&devc->lock, flags);
277 	if (sb_dsp_command(devc, 0x40))
278 		sb_dsp_command(devc, devc->tconst);
279 	sb_dsp_command(devc, DSP_CMD_SPKON);
280 	spin_unlock_irqrestore(&devc->lock, flags);
281 	devc->trigger_bits = 0;
282 	return 0;
283 }
284 
sb1_audio_set_speed(int dev,int speed)285 static int sb1_audio_set_speed(int dev, int speed)
286 {
287 	int max_speed = 23000;
288 	sb_devc *devc = audio_devs[dev]->devc;
289 	int tmp;
290 
291 	if (devc->opened & OPEN_READ)
292 		max_speed = 13000;
293 
294 	if (speed > 0)
295 	{
296 		if (speed < 4000)
297 			speed = 4000;
298 
299 		if (speed > max_speed)
300 			speed = max_speed;
301 
302 		devc->tconst = (256 - ((1000000 + speed / 2) / speed)) & 0xff;
303 		tmp = 256 - devc->tconst;
304 		speed = (1000000 + tmp / 2) / tmp;
305 
306 		devc->speed = speed;
307 	}
308 	return devc->speed;
309 }
310 
sb1_audio_set_channels(int dev,short channels)311 static short sb1_audio_set_channels(int dev, short channels)
312 {
313 	sb_devc *devc = audio_devs[dev]->devc;
314 	return devc->channels = 1;
315 }
316 
sb1_audio_set_bits(int dev,unsigned int bits)317 static unsigned int sb1_audio_set_bits(int dev, unsigned int bits)
318 {
319 	sb_devc        *devc = audio_devs[dev]->devc;
320 	return devc->bits = 8;
321 }
322 
sb1_audio_halt_xfer(int dev)323 static void sb1_audio_halt_xfer(int dev)
324 {
325 	unsigned long flags;
326 	sb_devc *devc = audio_devs[dev]->devc;
327 
328 	spin_lock_irqsave(&devc->lock, flags);
329 	sb_dsp_reset(devc);
330 	spin_unlock_irqrestore(&devc->lock, flags);
331 }
332 
333 /*
334  * SB 2.0 and SB 2.01 compatible routines
335  */
336 
sb20_audio_output_block(int dev,unsigned long buf,int nr_bytes,int intrflag)337 static void sb20_audio_output_block(int dev, unsigned long buf, int nr_bytes,
338 			int intrflag)
339 {
340 	unsigned long flags;
341 	int count = nr_bytes;
342 	sb_devc *devc = audio_devs[dev]->devc;
343 	unsigned char cmd;
344 
345 	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */
346 
347 	if (audio_devs[dev]->dmap_out->dma > 3)
348 		count >>= 1;
349 	count--;
350 
351 	devc->irq_mode = IMODE_OUTPUT;
352 
353 	spin_lock_irqsave(&devc->lock, flags);
354 	if (sb_dsp_command(devc, 0x48))		/* DSP Block size */
355 	{
356 		sb_dsp_command(devc, (unsigned char) (count & 0xff));
357 		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
358 
359 		if (devc->speed * devc->channels <= 23000)
360 			cmd = 0x1c;	/* 8 bit PCM output */
361 		else
362 			cmd = 0x90;	/* 8 bit high speed PCM output (SB2.01/Pro) */
363 
364 		if (!sb_dsp_command(devc, cmd))
365 			printk(KERN_ERR "Sound Blaster:  unable to start DAC.\n");
366 	}
367 	else
368 		printk(KERN_ERR "Sound Blaster: unable to start DAC.\n");
369 	spin_unlock_irqrestore(&devc->lock, flags);
370 	devc->intr_active = 1;
371 }
372 
sb20_audio_start_input(int dev,unsigned long buf,int nr_bytes,int intrflag)373 static void sb20_audio_start_input(int dev, unsigned long buf, int nr_bytes, int intrflag)
374 {
375 	unsigned long flags;
376 	int count = nr_bytes;
377 	sb_devc *devc = audio_devs[dev]->devc;
378 	unsigned char cmd;
379 
380 	/*
381 	 * Start a DMA input to the buffer pointed by dmaqtail
382 	 */
383 
384 	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */
385 
386 	if (audio_devs[dev]->dmap_out->dma > 3)
387 		count >>= 1;
388 	count--;
389 
390 	devc->irq_mode = IMODE_INPUT;
391 
392 	spin_lock_irqsave(&devc->lock, flags);
393 	if (sb_dsp_command(devc, 0x48))		/* DSP Block size */
394 	{
395 		sb_dsp_command(devc, (unsigned char) (count & 0xff));
396 		sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff));
397 
398 		if (devc->speed * devc->channels <= (devc->major == 3 ? 23000 : 13000))
399 			cmd = 0x2c;	/* 8 bit PCM input */
400 		else
401 			cmd = 0x98;	/* 8 bit high speed PCM input (SB2.01/Pro) */
402 
403 		if (!sb_dsp_command(devc, cmd))
404 			printk(KERN_ERR "Sound Blaster:  unable to start ADC.\n");
405 	}
406 	else
407 		printk(KERN_ERR "Sound Blaster:  unable to start ADC.\n");
408 	spin_unlock_irqrestore(&devc->lock, flags);
409 	devc->intr_active = 1;
410 }
411 
sb20_audio_trigger(int dev,int bits)412 static void sb20_audio_trigger(int dev, int bits)
413 {
414 	sb_devc *devc = audio_devs[dev]->devc;
415 	bits &= devc->irq_mode;
416 
417 	if (!bits)
418 		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
419 	else
420 	{
421 		switch (devc->irq_mode)
422 		{
423 			case IMODE_INPUT:
424 				sb20_audio_start_input(dev, devc->trg_buf, devc->trg_bytes,
425 						devc->trg_intrflag);
426 				break;
427 
428 			case IMODE_OUTPUT:
429 				sb20_audio_output_block(dev, devc->trg_buf, devc->trg_bytes,
430 						devc->trg_intrflag);
431 			    break;
432 		}
433 	}
434 	devc->trigger_bits = bits;
435 }
436 
437 /*
438  * SB2.01 specific speed setup
439  */
440 
sb201_audio_set_speed(int dev,int speed)441 static int sb201_audio_set_speed(int dev, int speed)
442 {
443 	sb_devc *devc = audio_devs[dev]->devc;
444 	int tmp;
445 	int s = speed * devc->channels;
446 
447 	if (speed > 0)
448 	{
449 		if (speed < 4000)
450 			speed = 4000;
451 		if (speed > 44100)
452 			speed = 44100;
453 		if (devc->opened & OPEN_READ && speed > 15000)
454 			speed = 15000;
455 		devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff;
456 		tmp = 256 - devc->tconst;
457 		speed = ((1000000 + tmp / 2) / tmp) / devc->channels;
458 
459 		devc->speed = speed;
460 	}
461 	return devc->speed;
462 }
463 
464 /*
465  * SB Pro specific routines
466  */
467 
sbpro_audio_prepare_for_input(int dev,int bsize,int bcount)468 static int sbpro_audio_prepare_for_input(int dev, int bsize, int bcount)
469 {				/* For SB Pro and Jazz16 */
470 	sb_devc *devc = audio_devs[dev]->devc;
471 	unsigned long flags;
472 	unsigned char bits = 0;
473 
474 	if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
475 		audio_devs[dev]->dmap_out->dma = audio_devs[dev]->dmap_in->dma =
476 			devc->bits == 16 ? devc->dma16 : devc->dma8;
477 
478 	if (devc->model == MDL_JAZZ || devc->model == MDL_SMW)
479 		if (devc->bits == AFMT_S16_LE)
480 			bits = 0x04;	/* 16 bit mode */
481 
482 	spin_lock_irqsave(&devc->lock, flags);
483 	if (sb_dsp_command(devc, 0x40))
484 		sb_dsp_command(devc, devc->tconst);
485 	sb_dsp_command(devc, DSP_CMD_SPKOFF);
486 	if (devc->channels == 1)
487 		sb_dsp_command(devc, 0xa0 | bits);	/* Mono input */
488 	else
489 		sb_dsp_command(devc, 0xa8 | bits);	/* Stereo input */
490 	spin_unlock_irqrestore(&devc->lock, flags);
491 
492 	devc->trigger_bits = 0;
493 	return 0;
494 }
495 
sbpro_audio_prepare_for_output(int dev,int bsize,int bcount)496 static int sbpro_audio_prepare_for_output(int dev, int bsize, int bcount)
497 {				/* For SB Pro and Jazz16 */
498 	sb_devc *devc = audio_devs[dev]->devc;
499 	unsigned long flags;
500 	unsigned char tmp;
501 	unsigned char bits = 0;
502 
503 	if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
504 		audio_devs[dev]->dmap_out->dma = audio_devs[dev]->dmap_in->dma = devc->bits == 16 ? devc->dma16 : devc->dma8;
505 	if (devc->model == MDL_SBPRO)
506 		sb_mixer_set_stereo(devc, devc->channels == 2);
507 
508 	spin_lock_irqsave(&devc->lock, flags);
509 	if (sb_dsp_command(devc, 0x40))
510 		sb_dsp_command(devc, devc->tconst);
511 	sb_dsp_command(devc, DSP_CMD_SPKON);
512 
513 	if (devc->model == MDL_JAZZ || devc->model == MDL_SMW)
514 	{
515 		if (devc->bits == AFMT_S16_LE)
516 			bits = 0x04;	/* 16 bit mode */
517 
518 		if (devc->channels == 1)
519 			sb_dsp_command(devc, 0xa0 | bits);	/* Mono output */
520 		else
521 			sb_dsp_command(devc, 0xa8 | bits);	/* Stereo output */
522 		spin_unlock_irqrestore(&devc->lock, flags);
523 	}
524 	else
525 	{
526 		spin_unlock_irqrestore(&devc->lock, flags);
527 		tmp = sb_getmixer(devc, 0x0e);
528 		if (devc->channels == 1)
529 			tmp &= ~0x02;
530 		else
531 			tmp |= 0x02;
532 		sb_setmixer(devc, 0x0e, tmp);
533 	}
534 	devc->trigger_bits = 0;
535 	return 0;
536 }
537 
sbpro_audio_set_speed(int dev,int speed)538 static int sbpro_audio_set_speed(int dev, int speed)
539 {
540 	sb_devc *devc = audio_devs[dev]->devc;
541 
542 	if (speed > 0)
543 	{
544 		if (speed < 4000)
545 			speed = 4000;
546 		if (speed > 44100)
547 			speed = 44100;
548 		if (devc->channels > 1 && speed > 22050)
549 			speed = 22050;
550 		sb201_audio_set_speed(dev, speed);
551 	}
552 	return devc->speed;
553 }
554 
sbpro_audio_set_channels(int dev,short channels)555 static short sbpro_audio_set_channels(int dev, short channels)
556 {
557 	sb_devc *devc = audio_devs[dev]->devc;
558 
559 	if (channels == 1 || channels == 2)
560 	{
561 		if (channels != devc->channels)
562 		{
563 			devc->channels = channels;
564 			if (devc->model == MDL_SBPRO && devc->channels == 2)
565 				sbpro_audio_set_speed(dev, devc->speed);
566 		}
567 	}
568 	return devc->channels;
569 }
570 
jazz16_audio_set_speed(int dev,int speed)571 static int jazz16_audio_set_speed(int dev, int speed)
572 {
573 	sb_devc *devc = audio_devs[dev]->devc;
574 
575 	if (speed > 0)
576 	{
577 		int tmp;
578 		int s = speed * devc->channels;
579 
580 		if (speed < 5000)
581 			speed = 5000;
582 		if (speed > 44100)
583 			speed = 44100;
584 
585 		devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff;
586 
587 		tmp = 256 - devc->tconst;
588 		speed = ((1000000 + tmp / 2) / tmp) / devc->channels;
589 
590 		devc->speed = speed;
591 	}
592 	return devc->speed;
593 }
594 
595 /*
596  * SB16 specific routines
597  */
598 
sb16_audio_set_speed(int dev,int speed)599 static int sb16_audio_set_speed(int dev, int speed)
600 {
601 	sb_devc *devc = audio_devs[dev]->devc;
602 	int	max_speed = devc->submodel == SUBMDL_ALS100 ? 48000 : 44100;
603 
604 	if (speed > 0)
605 	{
606 		if (speed < 5000)
607 			speed = 5000;
608 
609 		if (speed > max_speed)
610 			speed = max_speed;
611 
612 		devc->speed = speed;
613 	}
614 	return devc->speed;
615 }
616 
sb16_audio_set_bits(int dev,unsigned int bits)617 static unsigned int sb16_audio_set_bits(int dev, unsigned int bits)
618 {
619 	sb_devc *devc = audio_devs[dev]->devc;
620 
621 	if (bits != 0)
622 	{
623 		if (bits == AFMT_U8 || bits == AFMT_S16_LE)
624 			devc->bits = bits;
625 		else
626 			devc->bits = AFMT_U8;
627 	}
628 
629 	return devc->bits;
630 }
631 
sb16_audio_prepare_for_input(int dev,int bsize,int bcount)632 static int sb16_audio_prepare_for_input(int dev, int bsize, int bcount)
633 {
634 	sb_devc *devc = audio_devs[dev]->devc;
635 
636 	if (!devc->fullduplex)
637 	{
638 		audio_devs[dev]->dmap_out->dma =
639 			audio_devs[dev]->dmap_in->dma =
640 				devc->bits == AFMT_S16_LE ?
641 					devc->dma16 : devc->dma8;
642 	}
643 	else if (devc->bits == AFMT_S16_LE)
644 	{
645 		audio_devs[dev]->dmap_out->dma = devc->dma8;
646 		audio_devs[dev]->dmap_in->dma = devc->dma16;
647 	}
648 	else
649 	{
650 		audio_devs[dev]->dmap_out->dma = devc->dma16;
651 		audio_devs[dev]->dmap_in->dma = devc->dma8;
652 	}
653 
654 	devc->trigger_bits = 0;
655 	return 0;
656 }
657 
sb16_audio_prepare_for_output(int dev,int bsize,int bcount)658 static int sb16_audio_prepare_for_output(int dev, int bsize, int bcount)
659 {
660 	sb_devc *devc = audio_devs[dev]->devc;
661 
662 	if (!devc->fullduplex)
663 	{
664 		audio_devs[dev]->dmap_out->dma =
665 			audio_devs[dev]->dmap_in->dma =
666 				devc->bits == AFMT_S16_LE ?
667 					devc->dma16 : devc->dma8;
668 	}
669 	else if (devc->bits == AFMT_S16_LE)
670 	{
671 		audio_devs[dev]->dmap_out->dma = devc->dma8;
672 		audio_devs[dev]->dmap_in->dma = devc->dma16;
673 	}
674 	else
675 	{
676 		audio_devs[dev]->dmap_out->dma = devc->dma16;
677 		audio_devs[dev]->dmap_in->dma = devc->dma8;
678 	}
679 
680 	devc->trigger_bits = 0;
681 	return 0;
682 }
683 
sb16_audio_output_block(int dev,unsigned long buf,int count,int intrflag)684 static void sb16_audio_output_block(int dev, unsigned long buf, int count,
685 			int intrflag)
686 {
687 	unsigned long   flags, cnt;
688 	sb_devc        *devc = audio_devs[dev]->devc;
689 	unsigned long   bits;
690 
691 	if (!devc->fullduplex || devc->bits == AFMT_S16_LE)
692 	{
693 		devc->irq_mode = IMODE_OUTPUT;
694 		devc->intr_active = 1;
695 	}
696 	else
697 	{
698 		devc->irq_mode_16 = IMODE_OUTPUT;
699 		devc->intr_active_16 = 1;
700 	}
701 
702 	/* save value */
703 	spin_lock_irqsave(&devc->lock, flags);
704 	bits = devc->bits;
705 	if (devc->fullduplex)
706 		devc->bits = (devc->bits == AFMT_S16_LE) ?
707 			AFMT_U8 : AFMT_S16_LE;
708 	spin_unlock_irqrestore(&devc->lock, flags);
709 
710 	cnt = count;
711 	if (devc->bits == AFMT_S16_LE)
712 		cnt >>= 1;
713 	cnt--;
714 
715 	spin_lock_irqsave(&devc->lock, flags);
716 
717 	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */
718 
719 	sb_dsp_command(devc, 0x41);
720 	sb_dsp_command(devc, (unsigned char) ((devc->speed >> 8) & 0xff));
721 	sb_dsp_command(devc, (unsigned char) (devc->speed & 0xff));
722 
723 	sb_dsp_command(devc, (devc->bits == AFMT_S16_LE ? 0xb6 : 0xc6));
724 	sb_dsp_command(devc, ((devc->channels == 2 ? 0x20 : 0) +
725 			      (devc->bits == AFMT_S16_LE ? 0x10 : 0)));
726 	sb_dsp_command(devc, (unsigned char) (cnt & 0xff));
727 	sb_dsp_command(devc, (unsigned char) (cnt >> 8));
728 
729 	/* restore real value after all programming */
730 	devc->bits = bits;
731 	spin_unlock_irqrestore(&devc->lock, flags);
732 }
733 
734 
735 /*
736  *	This fails on the Cyrix MediaGX. If you don't have the DMA enabled
737  *	before the first sample arrives it locks up. However even if you
738  *	do enable the DMA in time you just get DMA timeouts and missing
739  *	interrupts and stuff, so for now I've not bothered fixing this either.
740  */
741 
sb16_audio_start_input(int dev,unsigned long buf,int count,int intrflag)742 static void sb16_audio_start_input(int dev, unsigned long buf, int count, int intrflag)
743 {
744 	unsigned long   flags, cnt;
745 	sb_devc        *devc = audio_devs[dev]->devc;
746 
747 	if (!devc->fullduplex || devc->bits != AFMT_S16_LE)
748 	{
749 		devc->irq_mode = IMODE_INPUT;
750 		devc->intr_active = 1;
751 	}
752 	else
753 	{
754 		devc->irq_mode_16 = IMODE_INPUT;
755 		devc->intr_active_16 = 1;
756 	}
757 
758 	cnt = count;
759 	if (devc->bits == AFMT_S16_LE)
760 		cnt >>= 1;
761 	cnt--;
762 
763 	spin_lock_irqsave(&devc->lock, flags);
764 
765 	/* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */
766 
767 	sb_dsp_command(devc, 0x42);
768 	sb_dsp_command(devc, (unsigned char) ((devc->speed >> 8) & 0xff));
769 	sb_dsp_command(devc, (unsigned char) (devc->speed & 0xff));
770 
771 	sb_dsp_command(devc, (devc->bits == AFMT_S16_LE ? 0xbe : 0xce));
772 	sb_dsp_command(devc, ((devc->channels == 2 ? 0x20 : 0) +
773 			      (devc->bits == AFMT_S16_LE ? 0x10 : 0)));
774 	sb_dsp_command(devc, (unsigned char) (cnt & 0xff));
775 	sb_dsp_command(devc, (unsigned char) (cnt >> 8));
776 
777 	spin_unlock_irqrestore(&devc->lock, flags);
778 }
779 
sb16_audio_trigger(int dev,int bits)780 static void sb16_audio_trigger(int dev, int bits)
781 {
782 	sb_devc *devc = audio_devs[dev]->devc;
783 
784 	int bits_16 = bits & devc->irq_mode_16;
785 	bits &= devc->irq_mode;
786 
787 	if (!bits && !bits_16)
788 		sb_dsp_command(devc, 0xd0);	/* Halt DMA */
789 	else
790 	{
791 		if (bits)
792 		{
793 			switch (devc->irq_mode)
794 			{
795 				case IMODE_INPUT:
796 					sb16_audio_start_input(dev,
797 							devc->trg_buf,
798 							devc->trg_bytes,
799 							devc->trg_intrflag);
800 					break;
801 
802 				case IMODE_OUTPUT:
803 					sb16_audio_output_block(dev,
804 							devc->trg_buf,
805 							devc->trg_bytes,
806 							devc->trg_intrflag);
807 					break;
808 			}
809 		}
810 		if (bits_16)
811 		{
812 			switch (devc->irq_mode_16)
813 			{
814 				case IMODE_INPUT:
815 					sb16_audio_start_input(dev,
816 							devc->trg_buf_16,
817 							devc->trg_bytes_16,
818 							devc->trg_intrflag_16);
819 					break;
820 
821 				case IMODE_OUTPUT:
822 					sb16_audio_output_block(dev,
823 							devc->trg_buf_16,
824 							devc->trg_bytes_16,
825 							devc->trg_intrflag_16);
826 					break;
827 			}
828 		}
829 	}
830 
831 	devc->trigger_bits = bits | bits_16;
832 }
833 
834 static unsigned char lbuf8[2048];
835 static signed short *lbuf16 = (signed short *)lbuf8;
836 #define LBUFCOPYSIZE 1024
837 static void
sb16_copy_from_user(int dev,char * localbuf,int localoffs,const char __user * userbuf,int useroffs,int max_in,int max_out,int * used,int * returned,int len)838 sb16_copy_from_user(int dev,
839 		char *localbuf, int localoffs,
840 		const char __user *userbuf, int useroffs,
841 		int max_in, int max_out,
842 		int *used, int *returned,
843 		int len)
844 {
845 	sb_devc       *devc = audio_devs[dev]->devc;
846 	int           i, c, p, locallen;
847 	unsigned char *buf8;
848 	signed short  *buf16;
849 
850 	/* if not duplex no conversion */
851 	if (!devc->fullduplex)
852 	{
853 		if (copy_from_user(localbuf + localoffs,
854 				   userbuf + useroffs, len))
855 			return;
856 		*used = len;
857 		*returned = len;
858 	}
859 	else if (devc->bits == AFMT_S16_LE)
860 	{
861 		/* 16 -> 8 */
862 		/* max_in >> 1, max number of samples in ( 16 bits ) */
863 		/* max_out, max number of samples out ( 8 bits ) */
864 		/* len, number of samples that will be taken ( 16 bits )*/
865 		/* c, count of samples remaining in buffer ( 16 bits )*/
866 		/* p, count of samples already processed ( 16 bits )*/
867 		len = ( (max_in >> 1) > max_out) ? max_out : (max_in >> 1);
868 		c = len;
869 		p = 0;
870 		buf8 = (unsigned char *)(localbuf + localoffs);
871 		while (c)
872 		{
873 			locallen = (c >= LBUFCOPYSIZE ? LBUFCOPYSIZE : c);
874 			/* << 1 in order to get 16 bit samples */
875 			if (copy_from_user(lbuf16,
876 					   userbuf + useroffs + (p << 1),
877 					   locallen << 1))
878 				return;
879 			for (i = 0; i < locallen; i++)
880 			{
881 				buf8[p+i] = ~((lbuf16[i] >> 8) & 0xff) ^ 0x80;
882 			}
883 			c -= locallen; p += locallen;
884 		}
885 		/* used = ( samples * 16 bits size ) */
886 		*used =  max_in  > ( max_out << 1) ? (max_out << 1) : max_in;
887 		/* returned = ( samples * 8 bits size ) */
888 		*returned = len;
889 	}
890 	else
891 	{
892 		/* 8 -> 16 */
893 		/* max_in, max number of samples in ( 8 bits ) */
894 		/* max_out >> 1, max number of samples out ( 16 bits ) */
895 		/* len, number of samples that will be taken ( 8 bits )*/
896 		/* c, count of samples remaining in buffer ( 8 bits )*/
897 		/* p, count of samples already processed ( 8 bits )*/
898 		len = max_in > (max_out >> 1) ? (max_out >> 1) : max_in;
899 		c = len;
900 		p = 0;
901 		buf16 = (signed short *)(localbuf + localoffs);
902 		while (c)
903 		{
904 			locallen = (c >= LBUFCOPYSIZE ? LBUFCOPYSIZE : c);
905 			if (copy_from_user(lbuf8,
906 					   userbuf+useroffs + p,
907 					   locallen))
908 				return;
909 			for (i = 0; i < locallen; i++)
910 			{
911 				buf16[p+i] = (~lbuf8[i] ^ 0x80) << 8;
912 			}
913 	      		c -= locallen; p += locallen;
914 		}
915 		/* used = ( samples * 8 bits size ) */
916 		*used = len;
917 		/* returned = ( samples * 16 bits size ) */
918 		*returned = len << 1;
919 	}
920 }
921 
922 static void
sb16_audio_mmap(int dev)923 sb16_audio_mmap(int dev)
924 {
925 	sb_devc       *devc = audio_devs[dev]->devc;
926 	devc->fullduplex = 0;
927 }
928 
929 static struct audio_driver sb1_audio_driver =	/* SB1.x */
930 {
931 	.owner			= THIS_MODULE,
932 	.open			= sb_audio_open,
933 	.close			= sb_audio_close,
934 	.output_block		= sb_set_output_parms,
935 	.start_input		= sb_set_input_parms,
936 	.prepare_for_input	= sb1_audio_prepare_for_input,
937 	.prepare_for_output	= sb1_audio_prepare_for_output,
938 	.halt_io		= sb1_audio_halt_xfer,
939 	.trigger		= sb1_audio_trigger,
940 	.set_speed		= sb1_audio_set_speed,
941 	.set_bits		= sb1_audio_set_bits,
942 	.set_channels		= sb1_audio_set_channels
943 };
944 
945 static struct audio_driver sb20_audio_driver =	/* SB2.0 */
946 {
947 	.owner			= THIS_MODULE,
948 	.open			= sb_audio_open,
949 	.close			= sb_audio_close,
950 	.output_block		= sb_set_output_parms,
951 	.start_input		= sb_set_input_parms,
952 	.prepare_for_input	= sb1_audio_prepare_for_input,
953 	.prepare_for_output	= sb1_audio_prepare_for_output,
954 	.halt_io		= sb1_audio_halt_xfer,
955 	.trigger		= sb20_audio_trigger,
956 	.set_speed		= sb1_audio_set_speed,
957 	.set_bits		= sb1_audio_set_bits,
958 	.set_channels		= sb1_audio_set_channels
959 };
960 
961 static struct audio_driver sb201_audio_driver =		/* SB2.01 */
962 {
963 	.owner			= THIS_MODULE,
964 	.open			= sb_audio_open,
965 	.close			= sb_audio_close,
966 	.output_block		= sb_set_output_parms,
967 	.start_input		= sb_set_input_parms,
968 	.prepare_for_input	= sb1_audio_prepare_for_input,
969 	.prepare_for_output	= sb1_audio_prepare_for_output,
970 	.halt_io		= sb1_audio_halt_xfer,
971 	.trigger		= sb20_audio_trigger,
972 	.set_speed		= sb201_audio_set_speed,
973 	.set_bits		= sb1_audio_set_bits,
974 	.set_channels		= sb1_audio_set_channels
975 };
976 
977 static struct audio_driver sbpro_audio_driver =		/* SB Pro */
978 {
979 	.owner			= THIS_MODULE,
980 	.open			= sb_audio_open,
981 	.close			= sb_audio_close,
982 	.output_block		= sb_set_output_parms,
983 	.start_input		= sb_set_input_parms,
984 	.prepare_for_input	= sbpro_audio_prepare_for_input,
985 	.prepare_for_output	= sbpro_audio_prepare_for_output,
986 	.halt_io		= sb1_audio_halt_xfer,
987 	.trigger		= sb20_audio_trigger,
988 	.set_speed		= sbpro_audio_set_speed,
989 	.set_bits		= sb1_audio_set_bits,
990 	.set_channels		= sbpro_audio_set_channels
991 };
992 
993 static struct audio_driver jazz16_audio_driver =	/* Jazz16 and SM Wave */
994 {
995 	.owner			= THIS_MODULE,
996 	.open			= sb_audio_open,
997 	.close			= sb_audio_close,
998 	.output_block		= sb_set_output_parms,
999 	.start_input		= sb_set_input_parms,
1000 	.prepare_for_input	= sbpro_audio_prepare_for_input,
1001 	.prepare_for_output	= sbpro_audio_prepare_for_output,
1002 	.halt_io		= sb1_audio_halt_xfer,
1003 	.trigger		= sb20_audio_trigger,
1004 	.set_speed		= jazz16_audio_set_speed,
1005 	.set_bits		= sb16_audio_set_bits,
1006 	.set_channels		= sbpro_audio_set_channels
1007 };
1008 
1009 static struct audio_driver sb16_audio_driver =	/* SB16 */
1010 {
1011 	.owner			= THIS_MODULE,
1012 	.open			= sb_audio_open,
1013 	.close			= sb_audio_close,
1014 	.output_block		= sb_set_output_parms,
1015 	.start_input		= sb_set_input_parms,
1016 	.prepare_for_input	= sb16_audio_prepare_for_input,
1017 	.prepare_for_output	= sb16_audio_prepare_for_output,
1018 	.halt_io		= sb1_audio_halt_xfer,
1019 	.copy_user		= sb16_copy_from_user,
1020 	.trigger		= sb16_audio_trigger,
1021 	.set_speed		= sb16_audio_set_speed,
1022 	.set_bits		= sb16_audio_set_bits,
1023 	.set_channels		= sbpro_audio_set_channels,
1024 	.mmap			= sb16_audio_mmap
1025 };
1026 
sb_audio_init(sb_devc * devc,char * name,struct module * owner)1027 void sb_audio_init(sb_devc * devc, char *name, struct module *owner)
1028 {
1029 	int audio_flags = 0;
1030 	int format_mask = AFMT_U8;
1031 
1032 	struct audio_driver *driver = &sb1_audio_driver;
1033 
1034 	switch (devc->model)
1035 	{
1036 		case MDL_SB1:	/* SB1.0 or SB 1.5 */
1037 			DDB(printk("Will use standard SB1.x driver\n"));
1038 			audio_flags = DMA_HARDSTOP;
1039 			break;
1040 
1041 		case MDL_SB2:
1042 			DDB(printk("Will use SB2.0 driver\n"));
1043 			audio_flags = DMA_AUTOMODE;
1044 			driver = &sb20_audio_driver;
1045 			break;
1046 
1047 		case MDL_SB201:
1048 			DDB(printk("Will use SB2.01 (high speed) driver\n"));
1049 			audio_flags = DMA_AUTOMODE;
1050 			driver = &sb201_audio_driver;
1051 			break;
1052 
1053 		case MDL_JAZZ:
1054 		case MDL_SMW:
1055 			DDB(printk("Will use Jazz16 driver\n"));
1056 			audio_flags = DMA_AUTOMODE;
1057 			format_mask |= AFMT_S16_LE;
1058 			driver = &jazz16_audio_driver;
1059 			break;
1060 
1061 		case MDL_ESS:
1062 			DDB(printk("Will use ESS ES688/1688 driver\n"));
1063 			driver = ess_audio_init (devc, &audio_flags, &format_mask);
1064 			break;
1065 
1066 		case MDL_SB16:
1067 			DDB(printk("Will use SB16 driver\n"));
1068 			audio_flags = DMA_AUTOMODE;
1069 			format_mask |= AFMT_S16_LE;
1070 			if (devc->dma8 != devc->dma16 && devc->dma16 != -1)
1071 			{
1072 				audio_flags |= DMA_DUPLEX;
1073 				devc->duplex = 1;
1074 			}
1075 			driver = &sb16_audio_driver;
1076 			break;
1077 
1078 		default:
1079 			DDB(printk("Will use SB Pro driver\n"));
1080 			audio_flags = DMA_AUTOMODE;
1081 			driver = &sbpro_audio_driver;
1082 	}
1083 
1084 	if (owner)
1085 			driver->owner = owner;
1086 
1087 	if ((devc->dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION,
1088 				name,driver, sizeof(struct audio_driver),
1089 				audio_flags, format_mask, devc,
1090 				devc->dma8,
1091 				devc->duplex ? devc->dma16 : devc->dma8)) < 0)
1092 	{
1093 		  printk(KERN_ERR "Sound Blaster:  unable to install audio.\n");
1094 		  return;
1095 	}
1096 	audio_devs[devc->dev]->mixer_dev = devc->my_mixerdev;
1097 	audio_devs[devc->dev]->min_fragment = 5;
1098 }
1099