1 // SPDX-License-Identifier: GPL-2.0-only
2 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
3
4 #include <linux/kernel.h>
5 #include <linux/export.h>
6 #include <media/drv-intf/saa7146_vv.h>
7
calculate_output_format_register(struct saa7146_dev * saa,u32 palette,u32 * clip_format)8 static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
9 {
10 /* clear out the necessary bits */
11 *clip_format &= 0x0000ffff;
12 /* set these bits new */
13 *clip_format |= (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
14 }
15
calculate_hps_source_and_sync(struct saa7146_dev * dev,int source,int sync,u32 * hps_ctrl)16 static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
17 {
18 *hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
19 *hps_ctrl |= (source << 30) | (sync << 28);
20 }
21
calculate_hxo_and_hyo(struct saa7146_vv * vv,u32 * hps_h_scale,u32 * hps_ctrl)22 static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl)
23 {
24 int hyo = 0, hxo = 0;
25
26 hyo = vv->standard->v_offset;
27 hxo = vv->standard->h_offset;
28
29 *hps_h_scale &= ~(MASK_B0 | 0xf00);
30 *hps_h_scale |= (hxo << 0);
31
32 *hps_ctrl &= ~(MASK_W0 | MASK_B2);
33 *hps_ctrl |= (hyo << 12);
34 }
35
36 /* helper functions for the calculation of the horizontal- and vertical
37 scaling registers, clip-format-register etc ...
38 these functions take pointers to the (most-likely read-out
39 original-values) and manipulate them according to the requested
40 changes.
41 */
42
43 /* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */
44 static struct {
45 u16 hps_coeff;
46 u16 weight_sum;
47 } hps_h_coeff_tab [] = {
48 {0x00, 2}, {0x02, 4}, {0x00, 4}, {0x06, 8}, {0x02, 8},
49 {0x08, 8}, {0x00, 8}, {0x1E, 16}, {0x0E, 8}, {0x26, 8},
50 {0x06, 8}, {0x42, 8}, {0x02, 8}, {0x80, 8}, {0x00, 8},
51 {0xFE, 16}, {0xFE, 8}, {0x7E, 8}, {0x7E, 8}, {0x3E, 8},
52 {0x3E, 8}, {0x1E, 8}, {0x1E, 8}, {0x0E, 8}, {0x0E, 8},
53 {0x06, 8}, {0x06, 8}, {0x02, 8}, {0x02, 8}, {0x00, 8},
54 {0x00, 8}, {0xFE, 16}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8},
55 {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8},
56 {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8},
57 {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0xFE, 8}, {0x7E, 8},
58 {0x7E, 8}, {0x3E, 8}, {0x3E, 8}, {0x1E, 8}, {0x1E, 8},
59 {0x0E, 8}, {0x0E, 8}, {0x06, 8}, {0x06, 8}, {0x02, 8},
60 {0x02, 8}, {0x00, 8}, {0x00, 8}, {0xFE, 16}
61 };
62
63 /* table of attenuation values for horizontal scaling */
64 static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
65
66 /* calculate horizontal scale registers */
calculate_h_scale_registers(struct saa7146_dev * dev,int in_x,int out_x,int flip_lr,u32 * hps_ctrl,u32 * hps_v_gain,u32 * hps_h_prescale,u32 * hps_h_scale)67 static int calculate_h_scale_registers(struct saa7146_dev *dev,
68 int in_x, int out_x, int flip_lr,
69 u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale)
70 {
71 /* horizontal prescaler */
72 u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0;
73 /* horizontal scaler */
74 u32 xim = 0, xp = 0, xsci =0;
75 /* vertical scale & gain */
76 u32 pfuv = 0;
77
78 /* helper variables */
79 u32 h_atten = 0, i = 0;
80
81 if ( 0 == out_x ) {
82 return -EINVAL;
83 }
84
85 /* mask out vanity-bit */
86 *hps_ctrl &= ~MASK_29;
87
88 /* calculate prescale-(xspc)-value: [n .. 1/2) : 1
89 [1/2 .. 1/3) : 2
90 [1/3 .. 1/4) : 3
91 ... */
92 if (in_x > out_x) {
93 xpsc = in_x / out_x;
94 }
95 else {
96 /* zooming */
97 xpsc = 1;
98 }
99
100 /* if flip_lr-bit is set, number of pixels after
101 horizontal prescaling must be < 384 */
102 if ( 0 != flip_lr ) {
103
104 /* set vanity bit */
105 *hps_ctrl |= MASK_29;
106
107 while (in_x / xpsc >= 384 )
108 xpsc++;
109 }
110 /* if zooming is wanted, number of pixels after
111 horizontal prescaling must be < 768 */
112 else {
113 while ( in_x / xpsc >= 768 )
114 xpsc++;
115 }
116
117 /* maximum prescale is 64 (p.69) */
118 if ( xpsc > 64 )
119 xpsc = 64;
120
121 /* keep xacm clear*/
122 xacm = 0;
123
124 /* set horizontal filter parameters (CXY = CXUV) */
125 cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff;
126 cxuv = cxy;
127
128 /* calculate and set horizontal fine scale (xsci) */
129
130 /* bypass the horizontal scaler ? */
131 if ( (in_x == out_x) && ( 1 == xpsc ) )
132 xsci = 0x400;
133 else
134 xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc;
135
136 /* set start phase for horizontal fine scale (xp) to 0 */
137 xp = 0;
138
139 /* set xim, if we bypass the horizontal scaler */
140 if ( 0x400 == xsci )
141 xim = 1;
142 else
143 xim = 0;
144
145 /* if the prescaler is bypassed, enable horizontal
146 accumulation mode (xacm) and clear dcgx */
147 if( 1 == xpsc ) {
148 xacm = 1;
149 dcgx = 0;
150 } else {
151 xacm = 0;
152 /* get best match in the table of attenuations
153 for horizontal scaling */
154 h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum;
155
156 for (i = 0; h_attenuation[i] != 0; i++) {
157 if (h_attenuation[i] >= h_atten)
158 break;
159 }
160
161 dcgx = i;
162 }
163
164 /* the horizontal scaling increment controls the UV filter
165 to reduce the bandwidth to improve the display quality,
166 so set it ... */
167 if ( xsci == 0x400)
168 pfuv = 0x00;
169 else if ( xsci < 0x600)
170 pfuv = 0x01;
171 else if ( xsci < 0x680)
172 pfuv = 0x11;
173 else if ( xsci < 0x700)
174 pfuv = 0x22;
175 else
176 pfuv = 0x33;
177
178
179 *hps_v_gain &= MASK_W0|MASK_B2;
180 *hps_v_gain |= (pfuv << 24);
181
182 *hps_h_scale &= ~(MASK_W1 | 0xf000);
183 *hps_h_scale |= (xim << 31) | (xp << 24) | (xsci << 12);
184
185 *hps_h_prescale |= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0);
186
187 return 0;
188 }
189
190 static struct {
191 u16 hps_coeff;
192 u16 weight_sum;
193 } hps_v_coeff_tab [] = {
194 {0x0100, 2}, {0x0102, 4}, {0x0300, 4}, {0x0106, 8}, {0x0502, 8},
195 {0x0708, 8}, {0x0F00, 8}, {0x011E, 16}, {0x110E, 16}, {0x1926, 16},
196 {0x3906, 16}, {0x3D42, 16}, {0x7D02, 16}, {0x7F80, 16}, {0xFF00, 16},
197 {0x01FE, 32}, {0x01FE, 32}, {0x817E, 32}, {0x817E, 32}, {0xC13E, 32},
198 {0xC13E, 32}, {0xE11E, 32}, {0xE11E, 32}, {0xF10E, 32}, {0xF10E, 32},
199 {0xF906, 32}, {0xF906, 32}, {0xFD02, 32}, {0xFD02, 32}, {0xFF00, 32},
200 {0xFF00, 32}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64},
201 {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64},
202 {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64},
203 {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x01FE, 64}, {0x817E, 64},
204 {0x817E, 64}, {0xC13E, 64}, {0xC13E, 64}, {0xE11E, 64}, {0xE11E, 64},
205 {0xF10E, 64}, {0xF10E, 64}, {0xF906, 64}, {0xF906, 64}, {0xFD02, 64},
206 {0xFD02, 64}, {0xFF00, 64}, {0xFF00, 64}, {0x01FE, 128}
207 };
208
209 /* table of attenuation values for vertical scaling */
210 static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
211
212 /* calculate vertical scale registers */
calculate_v_scale_registers(struct saa7146_dev * dev,enum v4l2_field field,int in_y,int out_y,u32 * hps_v_scale,u32 * hps_v_gain)213 static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
214 int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain)
215 {
216 int lpi = 0;
217
218 /* vertical scaling */
219 u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0;
220 /* vertical scale & gain */
221 u32 dcgy = 0, cya_cyb = 0;
222
223 /* helper variables */
224 u32 v_atten = 0, i = 0;
225
226 /* error, if vertical zooming */
227 if ( in_y < out_y ) {
228 return -EINVAL;
229 }
230
231 /* linear phase interpolation may be used
232 if scaling is between 1 and 1/2 (both fields used)
233 or scaling is between 1/2 and 1/4 (if only one field is used) */
234
235 if (V4L2_FIELD_HAS_BOTH(field)) {
236 if( 2*out_y >= in_y) {
237 lpi = 1;
238 }
239 } else if (field == V4L2_FIELD_TOP
240 || field == V4L2_FIELD_ALTERNATE
241 || field == V4L2_FIELD_BOTTOM) {
242 if( 4*out_y >= in_y ) {
243 lpi = 1;
244 }
245 out_y *= 2;
246 }
247 if( 0 != lpi ) {
248
249 yacm = 0;
250 yacl = 0;
251 cya_cyb = 0x00ff;
252
253 /* calculate scaling increment */
254 if ( in_y > out_y )
255 ysci = ((1024 * in_y) / (out_y + 1)) - 1024;
256 else
257 ysci = 0;
258
259 dcgy = 0;
260
261 /* calculate ype and ypo */
262 ype = ysci / 16;
263 ypo = ype + (ysci / 64);
264
265 } else {
266 yacm = 1;
267
268 /* calculate scaling increment */
269 ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10;
270
271 /* calculate ype and ypo */
272 ypo = ype = ((ysci + 15) / 16);
273
274 /* the sequence length interval (yacl) has to be set according
275 to the prescale value, e.g. [n .. 1/2) : 0
276 [1/2 .. 1/3) : 1
277 [1/3 .. 1/4) : 2
278 ... */
279 if ( ysci < 512) {
280 yacl = 0;
281 } else {
282 yacl = ( ysci / (1024 - ysci) );
283 }
284
285 /* get filter coefficients for cya, cyb from table hps_v_coeff_tab */
286 cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff;
287
288 /* get best match in the table of attenuations for vertical scaling */
289 v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum;
290
291 for (i = 0; v_attenuation[i] != 0; i++) {
292 if (v_attenuation[i] >= v_atten)
293 break;
294 }
295
296 dcgy = i;
297 }
298
299 /* ypo and ype swapped in spec ? */
300 *hps_v_scale |= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1);
301
302 *hps_v_gain &= ~(MASK_W0|MASK_B2);
303 *hps_v_gain |= (dcgy << 16) | (cya_cyb << 0);
304
305 return 0;
306 }
307
308 /* simple bubble-sort algorithm with duplicate elimination */
sort_and_eliminate(u32 * values,int * count)309 static int sort_and_eliminate(u32* values, int* count)
310 {
311 int low = 0, high = 0, top = 0;
312 int cur = 0, next = 0;
313
314 /* sanity checks */
315 if( (0 > *count) || (NULL == values) ) {
316 return -EINVAL;
317 }
318
319 /* bubble sort the first @count items of the array @values */
320 for( top = *count; top > 0; top--) {
321 for( low = 0, high = 1; high < top; low++, high++) {
322 if( values[low] > values[high] )
323 swap(values[low], values[high]);
324 }
325 }
326
327 /* remove duplicate items */
328 for( cur = 0, next = 1; next < *count; next++) {
329 if( values[cur] != values[next])
330 values[++cur] = values[next];
331 }
332
333 *count = cur + 1;
334
335 return 0;
336 }
337
calculate_clipping_registers_rect(struct saa7146_dev * dev,struct saa7146_fh * fh,struct saa7146_video_dma * vdma2,u32 * clip_format,u32 * arbtr_ctrl,enum v4l2_field field)338 static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh,
339 struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
340 {
341 struct saa7146_vv *vv = dev->vv_data;
342 __le32 *clipping = vv->d_clipping.cpu_addr;
343
344 int width = vv->ov.win.w.width;
345 int height = vv->ov.win.w.height;
346 int clipcount = vv->ov.nclips;
347
348 u32 line_list[32];
349 u32 pixel_list[32];
350 int numdwords = 0;
351
352 int i = 0, j = 0;
353 int cnt_line = 0, cnt_pixel = 0;
354
355 int x[32], y[32], w[32], h[32];
356
357 /* clear out memory */
358 memset(&line_list[0], 0x00, sizeof(u32)*32);
359 memset(&pixel_list[0], 0x00, sizeof(u32)*32);
360 memset(clipping, 0x00, SAA7146_CLIPPING_MEM);
361
362 /* fill the line and pixel-lists */
363 for(i = 0; i < clipcount; i++) {
364 int l = 0, r = 0, t = 0, b = 0;
365
366 x[i] = vv->ov.clips[i].c.left;
367 y[i] = vv->ov.clips[i].c.top;
368 w[i] = vv->ov.clips[i].c.width;
369 h[i] = vv->ov.clips[i].c.height;
370
371 if( w[i] < 0) {
372 x[i] += w[i]; w[i] = -w[i];
373 }
374 if( h[i] < 0) {
375 y[i] += h[i]; h[i] = -h[i];
376 }
377 if( x[i] < 0) {
378 w[i] += x[i]; x[i] = 0;
379 }
380 if( y[i] < 0) {
381 h[i] += y[i]; y[i] = 0;
382 }
383 if( 0 != vv->vflip ) {
384 y[i] = height - y[i] - h[i];
385 }
386
387 l = x[i];
388 r = x[i]+w[i];
389 t = y[i];
390 b = y[i]+h[i];
391
392 /* insert left/right coordinates */
393 pixel_list[ 2*i ] = min_t(int, l, width);
394 pixel_list[(2*i)+1] = min_t(int, r, width);
395 /* insert top/bottom coordinates */
396 line_list[ 2*i ] = min_t(int, t, height);
397 line_list[(2*i)+1] = min_t(int, b, height);
398 }
399
400 /* sort and eliminate lists */
401 cnt_line = cnt_pixel = 2*clipcount;
402 sort_and_eliminate( &pixel_list[0], &cnt_pixel );
403 sort_and_eliminate( &line_list[0], &cnt_line );
404
405 /* calculate the number of used u32s */
406 numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2;
407 numdwords = max_t(int, 4, numdwords);
408 numdwords = min_t(int, 64, numdwords);
409
410 /* fill up cliptable */
411 for(i = 0; i < cnt_pixel; i++) {
412 clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16);
413 }
414 for(i = 0; i < cnt_line; i++) {
415 clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16);
416 }
417
418 /* fill up cliptable with the display infos */
419 for(j = 0; j < clipcount; j++) {
420
421 for(i = 0; i < cnt_pixel; i++) {
422
423 if( x[j] < 0)
424 x[j] = 0;
425
426 if( pixel_list[i] < (x[j] + w[j])) {
427
428 if ( pixel_list[i] >= x[j] ) {
429 clipping[2*i] |= cpu_to_le32(1 << j);
430 }
431 }
432 }
433 for(i = 0; i < cnt_line; i++) {
434
435 if( y[j] < 0)
436 y[j] = 0;
437
438 if( line_list[i] < (y[j] + h[j]) ) {
439
440 if( line_list[i] >= y[j] ) {
441 clipping[(2*i)+1] |= cpu_to_le32(1 << j);
442 }
443 }
444 }
445 }
446
447 /* adjust arbitration control register */
448 *arbtr_ctrl &= 0xffff00ff;
449 *arbtr_ctrl |= 0x00001c00;
450
451 vdma2->base_even = vv->d_clipping.dma_handle;
452 vdma2->base_odd = vv->d_clipping.dma_handle;
453 vdma2->prot_addr = vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords));
454 vdma2->base_page = 0x04;
455 vdma2->pitch = 0x00;
456 vdma2->num_line_byte = (0 << 16 | (sizeof(u32))*(numdwords-1) );
457
458 /* set clipping-mode. this depends on the field(s) used */
459 *clip_format &= 0xfffffff7;
460 if (V4L2_FIELD_HAS_BOTH(field)) {
461 *clip_format |= 0x00000008;
462 } else {
463 *clip_format |= 0x00000000;
464 }
465 }
466
467 /* disable clipping */
saa7146_disable_clipping(struct saa7146_dev * dev)468 static void saa7146_disable_clipping(struct saa7146_dev *dev)
469 {
470 u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
471
472 /* mask out relevant bits (=lower word)*/
473 clip_format &= MASK_W1;
474
475 /* upload clipping-registers*/
476 saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
477 saa7146_write(dev, MC2, (MASK_05 | MASK_21));
478
479 /* disable video dma2 */
480 saa7146_write(dev, MC1, MASK_21);
481 }
482
saa7146_set_clipping_rect(struct saa7146_fh * fh)483 static void saa7146_set_clipping_rect(struct saa7146_fh *fh)
484 {
485 struct saa7146_dev *dev = fh->dev;
486 struct saa7146_vv *vv = dev->vv_data;
487 enum v4l2_field field = vv->ov.win.field;
488 struct saa7146_video_dma vdma2;
489 u32 clip_format;
490 u32 arbtr_ctrl;
491
492 /* check clipcount, disable clipping if clipcount == 0*/
493 if (vv->ov.nclips == 0) {
494 saa7146_disable_clipping(dev);
495 return;
496 }
497
498 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
499 arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
500
501 calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field);
502
503 /* set clipping format */
504 clip_format &= 0xffff0008;
505 clip_format |= (SAA7146_CLIPPING_RECT << 4);
506
507 /* prepare video dma2 */
508 saa7146_write(dev, BASE_EVEN2, vdma2.base_even);
509 saa7146_write(dev, BASE_ODD2, vdma2.base_odd);
510 saa7146_write(dev, PROT_ADDR2, vdma2.prot_addr);
511 saa7146_write(dev, BASE_PAGE2, vdma2.base_page);
512 saa7146_write(dev, PITCH2, vdma2.pitch);
513 saa7146_write(dev, NUM_LINE_BYTE2, vdma2.num_line_byte);
514
515 /* prepare the rest */
516 saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
517 saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
518
519 /* upload clip_control-register, clipping-registers, enable video dma2 */
520 saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19));
521 saa7146_write(dev, MC1, (MASK_05 | MASK_21));
522 }
523
saa7146_set_window(struct saa7146_dev * dev,int width,int height,enum v4l2_field field)524 static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field)
525 {
526 struct saa7146_vv *vv = dev->vv_data;
527
528 int source = vv->current_hps_source;
529 int sync = vv->current_hps_sync;
530
531 u32 hps_v_scale = 0, hps_v_gain = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0;
532
533 /* set vertical scale */
534 hps_v_scale = 0; /* all bits get set by the function-call */
535 hps_v_gain = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/
536 calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain);
537
538 /* set horizontal scale */
539 hps_ctrl = 0;
540 hps_h_prescale = 0; /* all bits get set in the function */
541 hps_h_scale = 0;
542 calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale);
543
544 /* set hyo and hxo */
545 calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl);
546 calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl);
547
548 /* write out new register contents */
549 saa7146_write(dev, HPS_V_SCALE, hps_v_scale);
550 saa7146_write(dev, HPS_V_GAIN, hps_v_gain);
551 saa7146_write(dev, HPS_CTRL, hps_ctrl);
552 saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale);
553 saa7146_write(dev, HPS_H_SCALE, hps_h_scale);
554
555 /* upload shadow-ram registers */
556 saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) );
557 }
558
559 /* calculate the new memory offsets for a desired position */
saa7146_set_position(struct saa7146_dev * dev,int w_x,int w_y,int w_height,enum v4l2_field field,u32 pixelformat)560 static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
561 {
562 struct saa7146_vv *vv = dev->vv_data;
563 struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
564
565 int b_depth = vv->ov_fmt->depth;
566 int b_bpl = vv->ov_fb.fmt.bytesperline;
567 /* The unsigned long cast is to remove a 64-bit compile warning since
568 it looks like a 64-bit address is cast to a 32-bit value, even
569 though the base pointer is really a 32-bit physical address that
570 goes into a 32-bit DMA register.
571 FIXME: might not work on some 64-bit platforms, but see the FIXME
572 in struct v4l2_framebuffer (videodev2.h) for that.
573 */
574 u32 base = (u32)(unsigned long)vv->ov_fb.base;
575
576 struct saa7146_video_dma vdma1;
577
578 /* calculate memory offsets for picture, look if we shall top-down-flip */
579 vdma1.pitch = 2*b_bpl;
580 if ( 0 == vv->vflip ) {
581 vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
582 vdma1.base_odd = vdma1.base_even + (vdma1.pitch / 2);
583 vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2));
584 }
585 else {
586 vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
587 vdma1.base_odd = vdma1.base_even - (vdma1.pitch / 2);
588 vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2));
589 }
590
591 if (V4L2_FIELD_HAS_BOTH(field)) {
592 } else if (field == V4L2_FIELD_ALTERNATE) {
593 /* fixme */
594 vdma1.base_odd = vdma1.prot_addr;
595 vdma1.pitch /= 2;
596 } else if (field == V4L2_FIELD_TOP) {
597 vdma1.base_odd = vdma1.prot_addr;
598 vdma1.pitch /= 2;
599 } else if (field == V4L2_FIELD_BOTTOM) {
600 vdma1.base_odd = vdma1.base_even;
601 vdma1.base_even = vdma1.prot_addr;
602 vdma1.pitch /= 2;
603 }
604
605 if ( 0 != vv->vflip ) {
606 vdma1.pitch *= -1;
607 }
608
609 vdma1.base_page = sfmt->swap;
610 vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels;
611
612 saa7146_write_out_dma(dev, 1, &vdma1);
613 }
614
saa7146_set_output_format(struct saa7146_dev * dev,unsigned long palette)615 static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette)
616 {
617 u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
618
619 /* call helper function */
620 calculate_output_format_register(dev,palette,&clip_format);
621
622 /* update the hps registers */
623 saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format);
624 saa7146_write(dev, MC2, (MASK_05 | MASK_21));
625 }
626
627 /* select input-source */
saa7146_set_hps_source_and_sync(struct saa7146_dev * dev,int source,int sync)628 void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
629 {
630 struct saa7146_vv *vv = dev->vv_data;
631 u32 hps_ctrl = 0;
632
633 /* read old state */
634 hps_ctrl = saa7146_read(dev, HPS_CTRL);
635
636 hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 );
637 hps_ctrl |= (source << 30) | (sync << 28);
638
639 /* write back & upload register */
640 saa7146_write(dev, HPS_CTRL, hps_ctrl);
641 saa7146_write(dev, MC2, (MASK_05 | MASK_21));
642
643 vv->current_hps_source = source;
644 vv->current_hps_sync = sync;
645 }
646 EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync);
647
saa7146_enable_overlay(struct saa7146_fh * fh)648 int saa7146_enable_overlay(struct saa7146_fh *fh)
649 {
650 struct saa7146_dev *dev = fh->dev;
651 struct saa7146_vv *vv = dev->vv_data;
652
653 saa7146_set_window(dev, vv->ov.win.w.width, vv->ov.win.w.height, vv->ov.win.field);
654 saa7146_set_position(dev, vv->ov.win.w.left, vv->ov.win.w.top, vv->ov.win.w.height, vv->ov.win.field, vv->ov_fmt->pixelformat);
655 saa7146_set_output_format(dev, vv->ov_fmt->trans);
656 saa7146_set_clipping_rect(fh);
657
658 /* enable video dma1 */
659 saa7146_write(dev, MC1, (MASK_06 | MASK_22));
660 return 0;
661 }
662
saa7146_disable_overlay(struct saa7146_fh * fh)663 void saa7146_disable_overlay(struct saa7146_fh *fh)
664 {
665 struct saa7146_dev *dev = fh->dev;
666
667 /* disable clipping + video dma1 */
668 saa7146_disable_clipping(dev);
669 saa7146_write(dev, MC1, MASK_22);
670 }
671
saa7146_write_out_dma(struct saa7146_dev * dev,int which,struct saa7146_video_dma * vdma)672 void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma)
673 {
674 int where = 0;
675
676 if( which < 1 || which > 3) {
677 return;
678 }
679
680 /* calculate starting address */
681 where = (which-1)*0x18;
682
683 saa7146_write(dev, where, vdma->base_odd);
684 saa7146_write(dev, where+0x04, vdma->base_even);
685 saa7146_write(dev, where+0x08, vdma->prot_addr);
686 saa7146_write(dev, where+0x0c, vdma->pitch);
687 saa7146_write(dev, where+0x10, vdma->base_page);
688 saa7146_write(dev, where+0x14, vdma->num_line_byte);
689
690 /* upload */
691 saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1)));
692 /*
693 printk("vdma%d.base_even: 0x%08x\n", which,vdma->base_even);
694 printk("vdma%d.base_odd: 0x%08x\n", which,vdma->base_odd);
695 printk("vdma%d.prot_addr: 0x%08x\n", which,vdma->prot_addr);
696 printk("vdma%d.base_page: 0x%08x\n", which,vdma->base_page);
697 printk("vdma%d.pitch: 0x%08x\n", which,vdma->pitch);
698 printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte);
699 */
700 }
701
calculate_video_dma_grab_packed(struct saa7146_dev * dev,struct saa7146_buf * buf)702 static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf)
703 {
704 struct saa7146_vv *vv = dev->vv_data;
705 struct saa7146_video_dma vdma1;
706
707 struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
708
709 int width = buf->fmt->width;
710 int height = buf->fmt->height;
711 int bytesperline = buf->fmt->bytesperline;
712 enum v4l2_field field = buf->fmt->field;
713
714 int depth = sfmt->depth;
715
716 DEB_CAP("[size=%dx%d,fields=%s]\n",
717 width, height, v4l2_field_names[field]);
718
719 if( bytesperline != 0) {
720 vdma1.pitch = bytesperline*2;
721 } else {
722 vdma1.pitch = (width*depth*2)/8;
723 }
724 vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
725 vdma1.base_page = buf->pt[0].dma | ME1 | sfmt->swap;
726
727 if( 0 != vv->vflip ) {
728 vdma1.prot_addr = buf->pt[0].offset;
729 vdma1.base_even = buf->pt[0].offset+(vdma1.pitch/2)*height;
730 vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2);
731 } else {
732 vdma1.base_even = buf->pt[0].offset;
733 vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2);
734 vdma1.prot_addr = buf->pt[0].offset+(vdma1.pitch/2)*height;
735 }
736
737 if (V4L2_FIELD_HAS_BOTH(field)) {
738 } else if (field == V4L2_FIELD_ALTERNATE) {
739 /* fixme */
740 if ( vv->last_field == V4L2_FIELD_TOP ) {
741 vdma1.base_odd = vdma1.prot_addr;
742 vdma1.pitch /= 2;
743 } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
744 vdma1.base_odd = vdma1.base_even;
745 vdma1.base_even = vdma1.prot_addr;
746 vdma1.pitch /= 2;
747 }
748 } else if (field == V4L2_FIELD_TOP) {
749 vdma1.base_odd = vdma1.prot_addr;
750 vdma1.pitch /= 2;
751 } else if (field == V4L2_FIELD_BOTTOM) {
752 vdma1.base_odd = vdma1.base_even;
753 vdma1.base_even = vdma1.prot_addr;
754 vdma1.pitch /= 2;
755 }
756
757 if( 0 != vv->vflip ) {
758 vdma1.pitch *= -1;
759 }
760
761 saa7146_write_out_dma(dev, 1, &vdma1);
762 return 0;
763 }
764
calc_planar_422(struct saa7146_vv * vv,struct saa7146_buf * buf,struct saa7146_video_dma * vdma2,struct saa7146_video_dma * vdma3)765 static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
766 {
767 int height = buf->fmt->height;
768 int width = buf->fmt->width;
769
770 vdma2->pitch = width;
771 vdma3->pitch = width;
772
773 /* fixme: look at bytesperline! */
774
775 if( 0 != vv->vflip ) {
776 vdma2->prot_addr = buf->pt[1].offset;
777 vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[1].offset;
778 vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2);
779
780 vdma3->prot_addr = buf->pt[2].offset;
781 vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[2].offset;
782 vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2);
783 } else {
784 vdma3->base_even = buf->pt[2].offset;
785 vdma3->base_odd = vdma3->base_even + (vdma3->pitch/2);
786 vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset;
787
788 vdma2->base_even = buf->pt[1].offset;
789 vdma2->base_odd = vdma2->base_even + (vdma2->pitch/2);
790 vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset;
791 }
792
793 return 0;
794 }
795
calc_planar_420(struct saa7146_vv * vv,struct saa7146_buf * buf,struct saa7146_video_dma * vdma2,struct saa7146_video_dma * vdma3)796 static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
797 {
798 int height = buf->fmt->height;
799 int width = buf->fmt->width;
800
801 vdma2->pitch = width/2;
802 vdma3->pitch = width/2;
803
804 if( 0 != vv->vflip ) {
805 vdma2->prot_addr = buf->pt[2].offset;
806 vdma2->base_even = ((vdma2->pitch/2)*height)+buf->pt[2].offset;
807 vdma2->base_odd = vdma2->base_even - (vdma2->pitch/2);
808
809 vdma3->prot_addr = buf->pt[1].offset;
810 vdma3->base_even = ((vdma3->pitch/2)*height)+buf->pt[1].offset;
811 vdma3->base_odd = vdma3->base_even - (vdma3->pitch/2);
812
813 } else {
814 vdma3->base_even = buf->pt[2].offset;
815 vdma3->base_odd = vdma3->base_even + (vdma3->pitch);
816 vdma3->prot_addr = (vdma3->pitch/2)*height+buf->pt[2].offset;
817
818 vdma2->base_even = buf->pt[1].offset;
819 vdma2->base_odd = vdma2->base_even + (vdma2->pitch);
820 vdma2->prot_addr = (vdma2->pitch/2)*height+buf->pt[1].offset;
821 }
822 return 0;
823 }
824
calculate_video_dma_grab_planar(struct saa7146_dev * dev,struct saa7146_buf * buf)825 static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf)
826 {
827 struct saa7146_vv *vv = dev->vv_data;
828 struct saa7146_video_dma vdma1;
829 struct saa7146_video_dma vdma2;
830 struct saa7146_video_dma vdma3;
831
832 struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
833
834 int width = buf->fmt->width;
835 int height = buf->fmt->height;
836 enum v4l2_field field = buf->fmt->field;
837
838 BUG_ON(0 == buf->pt[0].dma);
839 BUG_ON(0 == buf->pt[1].dma);
840 BUG_ON(0 == buf->pt[2].dma);
841
842 DEB_CAP("[size=%dx%d,fields=%s]\n",
843 width, height, v4l2_field_names[field]);
844
845 /* fixme: look at bytesperline! */
846
847 /* fixme: what happens for user space buffers here?. The offsets are
848 most likely wrong, this version here only works for page-aligned
849 buffers, modifications to the pagetable-functions are necessary...*/
850
851 vdma1.pitch = width*2;
852 vdma1.num_line_byte = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
853 vdma1.base_page = buf->pt[0].dma | ME1;
854
855 if( 0 != vv->vflip ) {
856 vdma1.prot_addr = buf->pt[0].offset;
857 vdma1.base_even = ((vdma1.pitch/2)*height)+buf->pt[0].offset;
858 vdma1.base_odd = vdma1.base_even - (vdma1.pitch/2);
859 } else {
860 vdma1.base_even = buf->pt[0].offset;
861 vdma1.base_odd = vdma1.base_even + (vdma1.pitch/2);
862 vdma1.prot_addr = (vdma1.pitch/2)*height+buf->pt[0].offset;
863 }
864
865 vdma2.num_line_byte = 0; /* unused */
866 vdma2.base_page = buf->pt[1].dma | ME1;
867
868 vdma3.num_line_byte = 0; /* unused */
869 vdma3.base_page = buf->pt[2].dma | ME1;
870
871 switch( sfmt->depth ) {
872 case 12: {
873 calc_planar_420(vv,buf,&vdma2,&vdma3);
874 break;
875 }
876 case 16: {
877 calc_planar_422(vv,buf,&vdma2,&vdma3);
878 break;
879 }
880 default: {
881 return -1;
882 }
883 }
884
885 if (V4L2_FIELD_HAS_BOTH(field)) {
886 } else if (field == V4L2_FIELD_ALTERNATE) {
887 /* fixme */
888 vdma1.base_odd = vdma1.prot_addr;
889 vdma1.pitch /= 2;
890 vdma2.base_odd = vdma2.prot_addr;
891 vdma2.pitch /= 2;
892 vdma3.base_odd = vdma3.prot_addr;
893 vdma3.pitch /= 2;
894 } else if (field == V4L2_FIELD_TOP) {
895 vdma1.base_odd = vdma1.prot_addr;
896 vdma1.pitch /= 2;
897 vdma2.base_odd = vdma2.prot_addr;
898 vdma2.pitch /= 2;
899 vdma3.base_odd = vdma3.prot_addr;
900 vdma3.pitch /= 2;
901 } else if (field == V4L2_FIELD_BOTTOM) {
902 vdma1.base_odd = vdma1.base_even;
903 vdma1.base_even = vdma1.prot_addr;
904 vdma1.pitch /= 2;
905 vdma2.base_odd = vdma2.base_even;
906 vdma2.base_even = vdma2.prot_addr;
907 vdma2.pitch /= 2;
908 vdma3.base_odd = vdma3.base_even;
909 vdma3.base_even = vdma3.prot_addr;
910 vdma3.pitch /= 2;
911 }
912
913 if( 0 != vv->vflip ) {
914 vdma1.pitch *= -1;
915 vdma2.pitch *= -1;
916 vdma3.pitch *= -1;
917 }
918
919 saa7146_write_out_dma(dev, 1, &vdma1);
920 if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) {
921 saa7146_write_out_dma(dev, 3, &vdma2);
922 saa7146_write_out_dma(dev, 2, &vdma3);
923 } else {
924 saa7146_write_out_dma(dev, 2, &vdma2);
925 saa7146_write_out_dma(dev, 3, &vdma3);
926 }
927 return 0;
928 }
929
program_capture_engine(struct saa7146_dev * dev,int planar)930 static void program_capture_engine(struct saa7146_dev *dev, int planar)
931 {
932 struct saa7146_vv *vv = dev->vv_data;
933 int count = 0;
934
935 unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
936 unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
937
938 /* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/
939 WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait);
940 WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait);
941
942 /* set rps register 0 */
943 WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4));
944 WRITE_RPS0(MASK_27 | MASK_11);
945
946 /* turn on video-dma1 */
947 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
948 WRITE_RPS0(MASK_06 | MASK_22); /* => mask */
949 WRITE_RPS0(MASK_06 | MASK_22); /* => values */
950 if( 0 != planar ) {
951 /* turn on video-dma2 */
952 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
953 WRITE_RPS0(MASK_05 | MASK_21); /* => mask */
954 WRITE_RPS0(MASK_05 | MASK_21); /* => values */
955
956 /* turn on video-dma3 */
957 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
958 WRITE_RPS0(MASK_04 | MASK_20); /* => mask */
959 WRITE_RPS0(MASK_04 | MASK_20); /* => values */
960 }
961
962 /* wait for o_fid_a/b / e_fid_a/b toggle */
963 if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
964 WRITE_RPS0(CMD_PAUSE | o_wait);
965 WRITE_RPS0(CMD_PAUSE | e_wait);
966 } else if ( vv->last_field == V4L2_FIELD_TOP ) {
967 WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
968 WRITE_RPS0(CMD_PAUSE | o_wait);
969 } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
970 WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
971 WRITE_RPS0(CMD_PAUSE | e_wait);
972 }
973
974 /* turn off video-dma1 */
975 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
976 WRITE_RPS0(MASK_22 | MASK_06); /* => mask */
977 WRITE_RPS0(MASK_22); /* => values */
978 if( 0 != planar ) {
979 /* turn off video-dma2 */
980 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
981 WRITE_RPS0(MASK_05 | MASK_21); /* => mask */
982 WRITE_RPS0(MASK_21); /* => values */
983
984 /* turn off video-dma3 */
985 WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
986 WRITE_RPS0(MASK_04 | MASK_20); /* => mask */
987 WRITE_RPS0(MASK_20); /* => values */
988 }
989
990 /* generate interrupt */
991 WRITE_RPS0(CMD_INTERRUPT);
992
993 /* stop */
994 WRITE_RPS0(CMD_STOP);
995 }
996
saa7146_set_capture(struct saa7146_dev * dev,struct saa7146_buf * buf,struct saa7146_buf * next)997 void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
998 {
999 struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
1000 struct saa7146_vv *vv = dev->vv_data;
1001 u32 vdma1_prot_addr;
1002
1003 DEB_CAP("buf:%p, next:%p\n", buf, next);
1004
1005 vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
1006 if( 0 == vdma1_prot_addr ) {
1007 /* clear out beginning of streaming bit (rps register 0)*/
1008 DEB_CAP("forcing sync to new frame\n");
1009 saa7146_write(dev, MC2, MASK_27 );
1010 }
1011
1012 saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field);
1013 saa7146_set_output_format(dev, sfmt->trans);
1014 saa7146_disable_clipping(dev);
1015
1016 if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
1017 } else if ( vv->last_field == V4L2_FIELD_TOP ) {
1018 vv->last_field = V4L2_FIELD_BOTTOM;
1019 } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
1020 vv->last_field = V4L2_FIELD_TOP;
1021 }
1022
1023 if( 0 != IS_PLANAR(sfmt->trans)) {
1024 calculate_video_dma_grab_planar(dev, buf);
1025 program_capture_engine(dev,1);
1026 } else {
1027 calculate_video_dma_grab_packed(dev, buf);
1028 program_capture_engine(dev,0);
1029 }
1030
1031 /*
1032 printk("vdma%d.base_even: 0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
1033 printk("vdma%d.base_odd: 0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
1034 printk("vdma%d.prot_addr: 0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
1035 printk("vdma%d.base_page: 0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
1036 printk("vdma%d.pitch: 0x%08x\n", 1,saa7146_read(dev,PITCH1));
1037 printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
1038 printk("vdma%d => vptr : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1));
1039 */
1040
1041 /* write the address of the rps-program */
1042 saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
1043
1044 /* turn on rps */
1045 saa7146_write(dev, MC1, (MASK_12 | MASK_28));
1046 }
1047