1 /****************************************************************************
2 * Perceptive Solutions, Inc. PCI-2220I device driver for Linux.
3 *
4 * pci2220i.c - Linux Host Driver for PCI-2220I EIDE RAID Adapters
5 *
6 * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
7 * All Rights Reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that redistributions of source
11 * code retain the above copyright notice and this comment without
12 * modification.
13 *
14 * Technical updates and product information at:
15 * http://www.psidisk.com
16 *
17 * Please send questions, comments, bug reports to:
18 * tech@psidisk.com Technical Support
19 *
20 *
21 * Revisions 1.10 Mar-26-1999
22 * - Updated driver for RAID and hot reconstruct support.
23 *
24 * Revisions 1.11 Mar-26-1999
25 * - Fixed spinlock and PCI configuration.
26 *
27 * Revision 2.00 December-1-1999
28 * - Added code for the PCI-2240I controller
29 * - Added code for ATAPI devices.
30 * - Double buffer for scatter/gather support
31 *
32 * Revision 2.10 March-27-2000
33 * - Added support for dynamic DMA
34 *
35 ****************************************************************************/
36
37 //#define DEBUG 1
38
39 #include <linux/module.h>
40 #include <linux/kernel.h>
41 #include <linux/types.h>
42 #include <linux/string.h>
43 #include <linux/slab.h>
44 #include <linux/pci.h>
45 #include <linux/ioport.h>
46 #include <linux/delay.h>
47 #include <linux/sched.h>
48 #include <linux/proc_fs.h>
49 #include <linux/stat.h>
50 #include <linux/kdev_t.h>
51 #include <linux/blk.h>
52 #include <linux/timer.h>
53 #include <linux/spinlock.h>
54 #include <asm/dma.h>
55 #include <asm/system.h>
56 #include <asm/io.h>
57 #include "scsi.h"
58 #include "hosts.h"
59 #include "pci2220i.h"
60 #include "psi_dale.h"
61
62
63 #define PCI2220I_VERSION "2.10"
64 #define READ_CMD IDE_CMD_READ_MULTIPLE
65 #define WRITE_CMD IDE_CMD_WRITE_MULTIPLE
66 #define MAX_BUS_MASTER_BLOCKS SECTORSXFER // This is the maximum we can bus master
67
68 #ifdef DEBUG
69 #define DEB(x) x
70 #define STOP_HERE() {int st;for(st=0;st<100;st++){st=1;}}
71 #else
72 #define DEB(x)
73 #define STOP_HERE()
74 #endif
75
76 #define MAXADAPTER 4 // Increase this and the sizes of the arrays below, if you need more.
77
78
79 typedef struct
80 {
81 UCHAR byte6; // device select register image
82 UCHAR spigot; // spigot number
83 UCHAR spigots[2]; // RAID spigots
84 UCHAR deviceID[2]; // device ID codes
85 USHORT sectors; // number of sectors per track
86 USHORT heads; // number of heads
87 USHORT cylinders; // number of cylinders for this device
88 USHORT spareword; // placeholder
89 ULONG blocks; // number of blocks on device
90 DISK_MIRROR DiskMirror[2]; // RAID status and control
91 ULONG lastsectorlba[2]; // last addressable sector on the drive
92 USHORT raid; // RAID active flag
93 USHORT mirrorRecon;
94 UCHAR reconOn;
95 USHORT reconCount;
96 USHORT reconIsStarting; // indicate hot reconstruct is starting
97 UCHAR cmdDrqInt; // flag for command interrupt
98 UCHAR packet; // command packet size in bytes
99 } OUR_DEVICE, *POUR_DEVICE;
100
101 typedef struct
102 {
103 USHORT bigD; // identity is a PCI-2240I if true, otherwise a PCI-2220I
104 USHORT atapi; // this interface is for ATAPI devices only
105 ULONG regDmaDesc; // address of the DMA discriptor register for direction of transfer
106 ULONG regDmaCmdStat; // Byte #1 of DMA command status register
107 ULONG regDmaAddrPci; // 32 bit register for PCI address of DMA
108 ULONG regDmaAddrLoc; // 32 bit register for local bus address of DMA
109 ULONG regDmaCount; // 32 bit register for DMA transfer count
110 ULONG regDmaMode; // 32 bit register for DMA mode control
111 ULONG regRemap; // 32 bit local space remap
112 ULONG regDesc; // 32 bit local region descriptor
113 ULONG regRange; // 32 bit local range
114 ULONG regIrqControl; // 16 bit Interrupt enable/disable and status
115 ULONG regScratchPad; // scratch pad I/O base address
116 ULONG regBase; // Base I/O register for data space
117 ULONG regData; // data register I/O address
118 ULONG regError; // error register I/O address
119 ULONG regSectCount; // sector count register I/O address
120 ULONG regLba0; // least significant byte of LBA
121 ULONG regLba8; // next least significant byte of LBA
122 ULONG regLba16; // next most significan byte of LBA
123 ULONG regLba24; // head and most 4 significant bits of LBA
124 ULONG regStatCmd; // status on read and command on write register
125 ULONG regStatSel; // board status on read and spigot select on write register
126 ULONG regFail; // fail bits control register
127 ULONG regAltStat; // alternate status and drive control register
128 ULONG basePort; // PLX base I/O port
129 USHORT timingMode; // timing mode currently set for adapter
130 USHORT timingPIO; // TRUE if PIO timing is active
131 struct pci_dev *pcidev;
132 ULONG timingAddress; // address to use on adapter for current timing mode
133 ULONG irqOwned; // owned IRQ or zero if shared
134 UCHAR numberOfDrives; // saved number of drives on this controller
135 UCHAR failRegister; // current inverted data in fail register
136 OUR_DEVICE device[BIGD_MAXDRIVES];
137 DISK_MIRROR *raidData[BIGD_MAXDRIVES];
138 ULONG startSector;
139 USHORT sectorCount;
140 ULONG readCount;
141 UCHAR *currentSgBuffer;
142 ULONG currentSgCount;
143 USHORT nextSg;
144 UCHAR cmd;
145 Scsi_Cmnd *SCpnt;
146 POUR_DEVICE pdev; // current device opearating on
147 USHORT devInReconIndex;
148 USHORT expectingIRQ;
149 USHORT reconOn; // Hot reconstruct is to be done.
150 USHORT reconPhase; // Hot reconstruct operation is in progress.
151 ULONG reconSize;
152 USHORT demoFail; // flag for RAID failure demonstration
153 USHORT survivor;
154 USHORT failinprog;
155 struct timer_list reconTimer;
156 struct timer_list timer;
157 UCHAR *kBuffer;
158 dma_addr_t kBufferDma;
159 UCHAR reqSense;
160 UCHAR atapiCdb[16];
161 UCHAR atapiSpecial;
162 } ADAPTER2220I, *PADAPTER2220I;
163
164 #define HOSTDATA(host) ((PADAPTER2220I)&host->hostdata)
165
166 #define RECON_PHASE_READY 0x01
167 #define RECON_PHASE_COPY 0x02
168 #define RECON_PHASE_UPDATE 0x03
169 #define RECON_PHASE_LAST 0x04
170 #define RECON_PHASE_END 0x07
171 #define RECON_PHASE_MARKING 0x80
172 #define RECON_PHASE_FAILOVER 0xFF
173
174 static struct Scsi_Host *PsiHost[MAXADAPTER] = {NULL,}; // One for each adapter
175 static int NumAdapters = 0;
176 static int Installed = 0;
177 static SETUP DaleSetup;
178 static DISK_MIRROR DiskMirror[BIGD_MAXDRIVES];
179 static ULONG ModeArray[] = {DALE_DATA_MODE2, DALE_DATA_MODE3, DALE_DATA_MODE4, DALE_DATA_MODE5};
180 static ULONG ModeArray2[] = {BIGD_DATA_MODE2, BIGD_DATA_MODE3, BIGD_DATA_MODE4, BIGD_DATA_MODE5};
181
182 static void ReconTimerExpiry (unsigned long data);
183
184 /*******************************************************************************************************
185 * Name: Alarm
186 *
187 * Description: Sound the for the given device
188 *
189 * Parameters: padapter - Pointer adapter data structure.
190 * device - Device number.
191 *
192 * Returns: Nothing.
193 *
194 ******************************************************************************************************/
Alarm(PADAPTER2220I padapter,UCHAR device)195 static void Alarm (PADAPTER2220I padapter, UCHAR device)
196 {
197 UCHAR zc;
198
199 if ( padapter->bigD )
200 {
201 zc = device | (FAIL_ANY | FAIL_AUDIBLE);
202 if ( padapter->failRegister & FAIL_ANY )
203 zc |= FAIL_MULTIPLE;
204
205 padapter->failRegister = zc;
206 outb_p (~zc, padapter->regFail);
207 }
208 else
209 outb_p (0x3C | (1 << device), padapter->regFail); // sound alarm and set fail light
210 }
211 /****************************************************************
212 * Name: MuteAlarm :LOCAL
213 *
214 * Description: Mute the audible alarm.
215 *
216 * Parameters: padapter - Pointer adapter data structure.
217 *
218 * Returns: TRUE if drive does not assert DRQ in time.
219 *
220 ****************************************************************/
MuteAlarm(PADAPTER2220I padapter)221 static void MuteAlarm (PADAPTER2220I padapter)
222 {
223 UCHAR old;
224
225 if ( padapter->bigD )
226 {
227 padapter->failRegister &= ~FAIL_AUDIBLE;
228 outb_p (~padapter->failRegister, padapter->regFail);
229 }
230 else
231 {
232 old = (inb_p (padapter->regStatSel) >> 3) | (inb_p (padapter->regStatSel) & 0x83);
233 outb_p (old | 0x40, padapter->regFail);
234 }
235 }
236 /****************************************************************
237 * Name: WaitReady :LOCAL
238 *
239 * Description: Wait for device ready.
240 *
241 * Parameters: padapter - Pointer adapter data structure.
242 *
243 * Returns: TRUE if drive does not assert DRQ in time.
244 *
245 ****************************************************************/
WaitReady(PADAPTER2220I padapter)246 static int WaitReady (PADAPTER2220I padapter)
247 {
248 ULONG z;
249 UCHAR status;
250
251 for ( z = 0; z < (TIMEOUT_READY * 4); z++ )
252 {
253 status = inb_p (padapter->regStatCmd);
254 if ( (status & (IDE_STATUS_DRDY | IDE_STATUS_BUSY)) == IDE_STATUS_DRDY )
255 return 0;
256 udelay (250);
257 }
258 return status;
259 }
260 /****************************************************************
261 * Name: WaitReadyReset :LOCAL
262 *
263 * Description: Wait for device ready.
264 *
265 * Parameters: padapter - Pointer adapter data structure.
266 *
267 * Returns: TRUE if drive does not assert DRQ in time.
268 *
269 ****************************************************************/
WaitReadyReset(PADAPTER2220I padapter)270 static int WaitReadyReset (PADAPTER2220I padapter)
271 {
272 ULONG z;
273 UCHAR status;
274
275 for ( z = 0; z < (125 * 16); z++ ) // wait up to 1/4 second
276 {
277 status = inb_p (padapter->regStatCmd);
278 if ( (status & (IDE_STATUS_DRDY | IDE_STATUS_BUSY)) == IDE_STATUS_DRDY )
279 {
280 DEB (printk ("\nPCI2220I: Reset took %ld mSec to be ready", z / 8));
281 return 0;
282 }
283 udelay (125);
284 }
285 DEB (printk ("\nPCI2220I: Reset took more than 2 Seconds to come ready, Disk Failure"));
286 return status;
287 }
288 /****************************************************************
289 * Name: WaitDrq :LOCAL
290 *
291 * Description: Wait for device ready for data transfer.
292 *
293 * Parameters: padapter - Pointer adapter data structure.
294 *
295 * Returns: TRUE if drive does not assert DRQ in time.
296 *
297 ****************************************************************/
WaitDrq(PADAPTER2220I padapter)298 static int WaitDrq (PADAPTER2220I padapter)
299 {
300 ULONG z;
301 UCHAR status;
302
303 for ( z = 0; z < (TIMEOUT_DRQ * 4); z++ )
304 {
305 status = inb_p (padapter->regStatCmd);
306 if ( status & IDE_STATUS_DRQ )
307 return 0;
308 udelay (250);
309 }
310 return status;
311 }
312 /****************************************************************
313 * Name: AtapiWaitReady :LOCAL
314 *
315 * Description: Wait for device busy and DRQ to be cleared.
316 *
317 * Parameters: padapter - Pointer adapter data structure.
318 * msec - Number of milliseconds to wait.
319 *
320 * Returns: TRUE if drive does not clear busy in time.
321 *
322 ****************************************************************/
AtapiWaitReady(PADAPTER2220I padapter,int msec)323 static int AtapiWaitReady (PADAPTER2220I padapter, int msec)
324 {
325 int z;
326
327 for ( z = 0; z < (msec * 16); z++ )
328 {
329 if ( !(inb_p (padapter->regStatCmd) & (IDE_STATUS_BUSY | IDE_STATUS_DRQ)) )
330 return FALSE;
331 udelay (125);
332 }
333 return TRUE;
334 }
335 /****************************************************************
336 * Name: AtapiWaitDrq :LOCAL
337 *
338 * Description: Wait for device ready for data transfer.
339 *
340 * Parameters: padapter - Pointer adapter data structure.
341 * msec - Number of milliseconds to wait.
342 *
343 * Returns: TRUE if drive does not assert DRQ in time.
344 *
345 ****************************************************************/
AtapiWaitDrq(PADAPTER2220I padapter,int msec)346 static int AtapiWaitDrq (PADAPTER2220I padapter, int msec)
347 {
348 ULONG z;
349
350 for ( z = 0; z < (msec * 16); z++ )
351 {
352 if ( inb_p (padapter->regStatCmd) & IDE_STATUS_DRQ )
353 return 0;
354 udelay (128);
355 }
356 return TRUE;
357 }
358 /****************************************************************
359 * Name: HardReset :LOCAL
360 *
361 * Description: Wait for device ready for data transfer.
362 *
363 * Parameters: padapter - Pointer adapter data structure.
364 * pdev - Pointer to device.
365 * spigot - Spigot number.
366 *
367 * Returns: TRUE if drive does not assert DRQ in time.
368 *
369 ****************************************************************/
HardReset(PADAPTER2220I padapter,POUR_DEVICE pdev,UCHAR spigot)370 static int HardReset (PADAPTER2220I padapter, POUR_DEVICE pdev, UCHAR spigot)
371 {
372 DEB (printk ("\npci2220i:RESET spigot = %X devices = %d, %d", spigot, pdev->deviceID[0], pdev->deviceID[1]));
373 mdelay (100); // just wait 100 mSec to let drives flush
374 SelectSpigot (padapter, spigot | SEL_IRQ_OFF);
375
376 outb_p (0x0E, padapter->regAltStat); // reset the suvivor
377 udelay (100); // wait a little
378 outb_p (0x08, padapter->regAltStat); // clear the reset
379 udelay (100);
380
381 outb_p (0xA0, padapter->regLba24); // select the master drive
382 if ( WaitReadyReset (padapter) )
383 {
384 DEB (printk ("\npci2220i: master not ready after reset"));
385 return TRUE;
386 }
387 outb_p (0xB0, padapter->regLba24); // try the slave drive
388 if ( (inb_p (padapter->regStatCmd) & (IDE_STATUS_DRDY | IDE_STATUS_BUSY)) == IDE_STATUS_DRDY )
389 {
390 DEB (printk ("\nPCI2220I: initializing slave drive on spigot %X", spigot));
391 outb_p (SECTORSXFER, padapter->regSectCount);
392 WriteCommand (padapter, IDE_CMD_SET_MULTIPLE);
393 if ( WaitReady (padapter) )
394 {
395 DEB (printk ("\npci2220i: slave not ready after set multiple"));
396 return TRUE;
397 }
398 }
399
400 outb_p (0xA0, padapter->regLba24); // select the drive
401 outb_p (SECTORSXFER, padapter->regSectCount);
402 WriteCommand (padapter, IDE_CMD_SET_MULTIPLE);
403 if ( WaitReady (padapter) )
404 {
405 DEB (printk ("\npci2220i: master not ready after set multiple"));
406 return TRUE;
407 }
408 return FALSE;
409 }
410 /****************************************************************
411 * Name: AtapiReset :LOCAL
412 *
413 * Description: Wait for device ready for data transfer.
414 *
415 * Parameters: padapter - Pointer adapter data structure.
416 * pdev - Pointer to device.
417 *
418 * Returns: TRUE if drive does not come ready.
419 *
420 ****************************************************************/
AtapiReset(PADAPTER2220I padapter,POUR_DEVICE pdev)421 static int AtapiReset (PADAPTER2220I padapter, POUR_DEVICE pdev)
422 {
423 SelectSpigot (padapter, pdev->spigot);
424 AtapiDevice (padapter, pdev->byte6);
425 AtapiCountLo (padapter, 0);
426 AtapiCountHi (padapter, 0);
427 WriteCommand (padapter, IDE_COMMAND_ATAPI_RESET);
428 udelay (125);
429 if ( AtapiWaitReady (padapter, 1000) )
430 return TRUE;
431 if ( inb_p (padapter->regStatCmd) || (inb_p (padapter->regLba8) != 0x14) || (inb_p (padapter->regLba16) != 0xEB) )
432 return TRUE;
433 return FALSE;
434 }
435 /****************************************************************
436 * Name: WalkScatGath :LOCAL
437 *
438 * Description: Transfer data to/from scatter/gather buffers.
439 *
440 * Parameters: padapter - Pointer adapter data structure.
441 * datain - TRUE if data read.
442 * length - Number of bytes to transfer.
443 *
444 * Returns: Nothing.
445 *
446 ****************************************************************/
WalkScatGath(PADAPTER2220I padapter,UCHAR datain,ULONG length)447 static void WalkScatGath (PADAPTER2220I padapter, UCHAR datain, ULONG length)
448 {
449 ULONG count;
450 UCHAR *buffer = padapter->kBuffer;
451
452 while ( length )
453 {
454 count = ( length > padapter->currentSgCount ) ? padapter->currentSgCount : length;
455
456 if ( datain )
457 memcpy (padapter->currentSgBuffer, buffer, count);
458 else
459 memcpy (buffer, padapter->currentSgBuffer, count);
460
461 padapter->currentSgCount -= count;
462 if ( !padapter->currentSgCount )
463 {
464 if ( padapter->nextSg < padapter->SCpnt->use_sg )
465 {
466 padapter->currentSgBuffer = ((struct scatterlist *)padapter->SCpnt->request_buffer)[padapter->nextSg].address;
467 padapter->currentSgCount = ((struct scatterlist *)padapter->SCpnt->request_buffer)[padapter->nextSg].length;
468 padapter->nextSg++;
469 }
470 }
471 else
472 padapter->currentSgBuffer += count;
473
474 length -= count;
475 buffer += count;
476 }
477 }
478 /****************************************************************
479 * Name: BusMaster :LOCAL
480 *
481 * Description: Do a bus master I/O.
482 *
483 * Parameters: padapter - Pointer adapter data structure.
484 * datain - TRUE if data read.
485 * irq - TRUE if bus master interrupt expected.
486 *
487 * Returns: Nothing.
488 *
489 ****************************************************************/
BusMaster(PADAPTER2220I padapter,UCHAR datain,UCHAR irq)490 static void BusMaster (PADAPTER2220I padapter, UCHAR datain, UCHAR irq)
491 {
492 ULONG zl;
493
494 zl = ( padapter->sectorCount > MAX_BUS_MASTER_BLOCKS ) ? MAX_BUS_MASTER_BLOCKS : padapter->sectorCount;
495 padapter->sectorCount -= zl;
496 zl *= (ULONG)BYTES_PER_SECTOR;
497
498 if ( datain )
499 {
500 padapter->readCount = zl;
501 outb_p (8, padapter->regDmaDesc); // read operation
502 if ( padapter->bigD )
503 {
504 if ( irq && !padapter->sectorCount )
505 outb_p (0x0C, padapter->regDmaMode); // interrupt on
506 else
507 outb_p (0x08, padapter->regDmaMode); // no interrupt
508 }
509 else
510 {
511 if ( irq && !padapter->sectorCount )
512 outb_p (0x05, padapter->regDmaMode); // interrupt on
513 else
514 outb_p (0x01, padapter->regDmaMode); // no interrupt
515 }
516 }
517 else
518 {
519 outb_p (0x00, padapter->regDmaDesc); // write operation
520 if ( padapter->bigD )
521 outb_p (0x08, padapter->regDmaMode); // no interrupt
522 else
523 outb_p (0x01, padapter->regDmaMode); // no interrupt
524 WalkScatGath (padapter, FALSE, zl);
525 }
526
527 outl (padapter->timingAddress, padapter->regDmaAddrLoc);
528 outl (padapter->kBufferDma, padapter->regDmaAddrPci);
529 outl (zl, padapter->regDmaCount);
530 outb_p (0x03, padapter->regDmaCmdStat); // kick the DMA engine in gear
531 }
532 /****************************************************************
533 * Name: AtapiBusMaster :LOCAL
534 *
535 * Description: Do a bus master I/O.
536 *
537 * Parameters: padapter - Pointer adapter data structure.
538 * datain - TRUE if data read.
539 * length - Number of bytes to transfer.
540 *
541 * Returns: Nothing.
542 *
543 ****************************************************************/
AtapiBusMaster(PADAPTER2220I padapter,UCHAR datain,ULONG length)544 static void AtapiBusMaster (PADAPTER2220I padapter, UCHAR datain, ULONG length)
545 {
546 outl (padapter->timingAddress, padapter->regDmaAddrLoc);
547 outl (padapter->kBufferDma, padapter->regDmaAddrPci);
548 outl (length, padapter->regDmaCount);
549 if ( datain )
550 {
551 if ( padapter->readCount )
552 WalkScatGath (padapter, TRUE, padapter->readCount);
553 outb_p (0x08, padapter->regDmaDesc); // read operation
554 outb_p (0x08, padapter->regDmaMode); // no interrupt
555 padapter->readCount = length;
556 }
557 else
558 {
559 outb_p (0x00, padapter->regDmaDesc); // write operation
560 outb_p (0x08, padapter->regDmaMode); // no interrupt
561 if ( !padapter->atapiSpecial )
562 WalkScatGath (padapter, FALSE, length);
563 }
564 outb_p (0x03, padapter->regDmaCmdStat); // kick the DMA engine in gear
565 }
566 /****************************************************************
567 * Name: WriteData :LOCAL
568 *
569 * Description: Write data to device.
570 *
571 * Parameters: padapter - Pointer adapter data structure.
572 *
573 * Returns: TRUE if drive does not assert DRQ in time.
574 *
575 ****************************************************************/
WriteData(PADAPTER2220I padapter)576 static int WriteData (PADAPTER2220I padapter)
577 {
578 ULONG zl;
579
580 if ( !WaitDrq (padapter) )
581 {
582 if ( padapter->timingPIO )
583 {
584 zl = (padapter->sectorCount > MAX_BUS_MASTER_BLOCKS) ? MAX_BUS_MASTER_BLOCKS : padapter->sectorCount;
585 WalkScatGath (padapter, FALSE, zl * BYTES_PER_SECTOR);
586 outsw (padapter->regData, padapter->kBuffer, zl * (BYTES_PER_SECTOR / 2));
587 padapter->sectorCount -= zl;
588 }
589 else
590 BusMaster (padapter, 0, 0);
591 return 0;
592 }
593 padapter->cmd = 0; // null out the command byte
594 return 1;
595 }
596 /****************************************************************
597 * Name: WriteDataBoth :LOCAL
598 *
599 * Description: Write data to device.
600 *
601 * Parameters: padapter - Pointer to adapter structure.
602 * pdev - Pointer to device structure
603 *
604 * Returns: Index + 1 of drive not failed or zero for OK.
605 *
606 ****************************************************************/
WriteDataBoth(PADAPTER2220I padapter,POUR_DEVICE pdev)607 static int WriteDataBoth (PADAPTER2220I padapter, POUR_DEVICE pdev)
608 {
609 ULONG zl;
610 UCHAR status0, status1;
611
612 SelectSpigot (padapter, pdev->spigots[0]);
613 status0 = WaitDrq (padapter);
614 if ( !status0 )
615 {
616 SelectSpigot (padapter, pdev->spigots[1]);
617 status1 = WaitDrq (padapter);
618 if ( !status1 )
619 {
620 SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1] | padapter->bigD);
621 if ( padapter->timingPIO )
622 {
623 zl = (padapter->sectorCount > MAX_BUS_MASTER_BLOCKS) ? MAX_BUS_MASTER_BLOCKS : padapter->sectorCount;
624 WalkScatGath (padapter, FALSE, zl * BYTES_PER_SECTOR);
625 outsw (padapter->regData, padapter->kBuffer, zl * (BYTES_PER_SECTOR / 2));
626 padapter->sectorCount -= zl;
627 }
628 else
629 BusMaster (padapter, 0, 0);
630 return 0;
631 }
632 }
633 padapter->cmd = 0; // null out the command byte
634 if ( status0 )
635 return 2;
636 return 1;
637 }
638 /****************************************************************
639 * Name: IdeCmd :LOCAL
640 *
641 * Description: Process an IDE command.
642 *
643 * Parameters: padapter - Pointer adapter data structure.
644 * pdev - Pointer to device.
645 *
646 * Returns: Zero if no error or status register contents on error.
647 *
648 ****************************************************************/
IdeCmd(PADAPTER2220I padapter,POUR_DEVICE pdev)649 static UCHAR IdeCmd (PADAPTER2220I padapter, POUR_DEVICE pdev)
650 {
651 UCHAR status;
652
653 SelectSpigot (padapter, pdev->spigot | padapter->bigD); // select the spigot
654 outb_p (pdev->byte6 | ((UCHAR *)(&padapter->startSector))[3], padapter->regLba24); // select the drive
655 status = WaitReady (padapter);
656 if ( !status )
657 {
658 outb_p (padapter->sectorCount, padapter->regSectCount);
659 outb_p (((UCHAR *)(&padapter->startSector))[0], padapter->regLba0);
660 outb_p (((UCHAR *)(&padapter->startSector))[1], padapter->regLba8);
661 outb_p (((UCHAR *)(&padapter->startSector))[2], padapter->regLba16);
662 padapter->expectingIRQ = TRUE;
663 WriteCommand (padapter, padapter->cmd);
664 return 0;
665 }
666
667 padapter->cmd = 0; // null out the command byte
668 return status;
669 }
670 /****************************************************************
671 * Name: IdeCmdBoth :LOCAL
672 *
673 * Description: Process an IDE command to both drivers.
674 *
675 * Parameters: padapter - Pointer adapter data structure.
676 * pdev - Pointer to device structure
677 *
678 * Returns: Index + 1 of drive not failed or zero for OK.
679 *
680 ****************************************************************/
IdeCmdBoth(PADAPTER2220I padapter,POUR_DEVICE pdev)681 static UCHAR IdeCmdBoth (PADAPTER2220I padapter, POUR_DEVICE pdev)
682 {
683 UCHAR status0;
684 UCHAR status1;
685
686 SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1]); // select the spigots
687 outb_p (padapter->pdev->byte6 | ((UCHAR *)(&padapter->startSector))[3], padapter->regLba24);// select the drive
688 SelectSpigot (padapter, pdev->spigots[0]);
689 status0 = WaitReady (padapter);
690 if ( !status0 )
691 {
692 SelectSpigot (padapter, pdev->spigots[1]);
693 status1 = WaitReady (padapter);
694 if ( !status1 )
695 {
696 SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1] | padapter->bigD);
697 outb_p (padapter->sectorCount, padapter->regSectCount);
698 outb_p (((UCHAR *)(&padapter->startSector))[0], padapter->regLba0);
699 outb_p (((UCHAR *)(&padapter->startSector))[1], padapter->regLba8);
700 outb_p (((UCHAR *)(&padapter->startSector))[2], padapter->regLba16);
701 padapter->expectingIRQ = TRUE;
702 WriteCommand (padapter, padapter->cmd);
703 return 0;
704 }
705 }
706 padapter->cmd = 0; // null out the command byte
707 if ( status0 )
708 return 2;
709 return 1;
710 }
711 /****************************************************************
712 * Name: OpDone :LOCAL
713 *
714 * Description: Complete an operatoin done sequence.
715 *
716 * Parameters: padapter - Pointer to host data block.
717 * spigot - Spigot select code.
718 * device - Device byte code.
719 *
720 * Returns: Nothing.
721 *
722 ****************************************************************/
OpDone(PADAPTER2220I padapter,ULONG result)723 static void OpDone (PADAPTER2220I padapter, ULONG result)
724 {
725 Scsi_Cmnd *SCpnt = padapter->SCpnt;
726
727 if ( padapter->reconPhase )
728 {
729 padapter->reconPhase = 0;
730 if ( padapter->SCpnt )
731 {
732 Pci2220i_QueueCommand (SCpnt, SCpnt->scsi_done);
733 }
734 else
735 {
736 if ( padapter->reconOn )
737 {
738 ReconTimerExpiry ((unsigned long)padapter);
739 }
740 }
741 }
742 else
743 {
744 padapter->cmd = 0;
745 padapter->SCpnt = NULL;
746 padapter->pdev = NULL;
747 SCpnt->result = result;
748 SCpnt->scsi_done (SCpnt);
749 if ( padapter->reconOn && !padapter->reconTimer.data )
750 {
751 padapter->reconTimer.expires = jiffies + (HZ / 4); // start in 1/4 second
752 padapter->reconTimer.data = (unsigned long)padapter;
753 add_timer (&padapter->reconTimer);
754 }
755 }
756 }
757 /****************************************************************
758 * Name: InlineIdentify :LOCAL
759 *
760 * Description: Do an intline inquiry on a drive.
761 *
762 * Parameters: padapter - Pointer to host data block.
763 * spigot - Spigot select code.
764 * device - Device byte code.
765 *
766 * Returns: Last addressable sector or zero if none.
767 *
768 ****************************************************************/
InlineIdentify(PADAPTER2220I padapter,UCHAR spigot,UCHAR device)769 static ULONG InlineIdentify (PADAPTER2220I padapter, UCHAR spigot, UCHAR device)
770 {
771 PIDENTIFY_DATA pid = (PIDENTIFY_DATA)padapter->kBuffer;
772
773 SelectSpigot (padapter, spigot | SEL_IRQ_OFF); // select the spigot
774 outb_p ((device << 4) | 0xA0, padapter->regLba24); // select the drive
775 if ( WaitReady (padapter) )
776 return 0;
777 WriteCommand (padapter, IDE_COMMAND_IDENTIFY);
778 if ( WaitDrq (padapter) )
779 return 0;
780 insw (padapter->regData, padapter->kBuffer, sizeof (IDENTIFY_DATA) >> 1);
781 return (pid->LBATotalSectors - 1);
782 }
783 /****************************************************************
784 * Name: AtapiIdentify :LOCAL
785 *
786 * Description: Do an intline inquiry on a drive.
787 *
788 * Parameters: padapter - Pointer to host data block.
789 * pdev - Pointer to device table.
790 *
791 * Returns: TRUE on error.
792 *
793 ****************************************************************/
AtapiIdentify(PADAPTER2220I padapter,POUR_DEVICE pdev)794 static ULONG AtapiIdentify (PADAPTER2220I padapter, POUR_DEVICE pdev)
795 {
796 ATAPI_GENERAL_0 ag0;
797 USHORT zs;
798 int z;
799
800 AtapiDevice (padapter, pdev->byte6);
801 WriteCommand (padapter, IDE_COMMAND_ATAPI_IDENTIFY);
802 if ( AtapiWaitDrq (padapter, 3000) )
803 return TRUE;
804
805 *(USHORT *)&ag0 = inw_p (padapter->regData);
806 for ( z = 0; z < 255; z++ )
807 zs = inw_p (padapter->regData);
808
809 if ( ag0.ProtocolType == 2 )
810 {
811 if ( ag0.CmdDrqType == 1 )
812 pdev->cmdDrqInt = TRUE;
813 switch ( ag0.CmdPacketSize )
814 {
815 case 0:
816 pdev->packet = 6;
817 break;
818 case 1:
819 pdev->packet = 8;
820 break;
821 default:
822 pdev->packet = 6;
823 break;
824 }
825 return FALSE;
826 }
827 return TRUE;
828 }
829 /****************************************************************
830 * Name: Atapi2Scsi
831 *
832 * Description: Convert ATAPI data to SCSI data.
833 *
834 * Parameters: padapter - Pointer adapter data structure.
835 * SCpnt - Pointer to SCSI command structure.
836 *
837 * Returns: Nothing.
838 *
839 ****************************************************************/
Atapi2Scsi(PADAPTER2220I padapter,Scsi_Cmnd * SCpnt)840 void Atapi2Scsi (PADAPTER2220I padapter, Scsi_Cmnd *SCpnt)
841 {
842 UCHAR *buff = padapter->currentSgBuffer;
843
844 switch ( SCpnt->cmnd[0] )
845 {
846 case SCSIOP_MODE_SENSE:
847 buff[0] = padapter->kBuffer[1];
848 buff[1] = padapter->kBuffer[2];
849 buff[2] = padapter->kBuffer[3];
850 buff[3] = padapter->kBuffer[7];
851 memcpy (&buff[4], &padapter->kBuffer[8], padapter->atapiCdb[8] - 8);
852 break;
853 case SCSIOP_INQUIRY:
854 padapter->kBuffer[2] = 2;
855 memcpy (buff, padapter->kBuffer, padapter->currentSgCount);
856 break;
857 default:
858 if ( padapter->readCount )
859 WalkScatGath (padapter, TRUE, padapter->readCount);
860 break;
861 }
862 }
863 /****************************************************************
864 * Name: Scsi2Atapi
865 *
866 * Description: Convert SCSI packet command to Atapi packet command.
867 *
868 * Parameters: padapter - Pointer adapter data structure.
869 * SCpnt - Pointer to SCSI command structure.
870 *
871 * Returns: Nothing.
872 *
873 ****************************************************************/
Scsi2Atapi(PADAPTER2220I padapter,Scsi_Cmnd * SCpnt)874 static void Scsi2Atapi (PADAPTER2220I padapter, Scsi_Cmnd *SCpnt)
875 {
876 UCHAR *cdb = SCpnt->cmnd;
877 UCHAR *buff = padapter->currentSgBuffer;
878
879 switch (cdb[0])
880 {
881 case SCSIOP_READ6:
882 padapter->atapiCdb[0] = SCSIOP_READ;
883 padapter->atapiCdb[1] = cdb[1] & 0xE0;
884 padapter->atapiCdb[3] = cdb[1] & 0x1F;
885 padapter->atapiCdb[4] = cdb[2];
886 padapter->atapiCdb[5] = cdb[3];
887 padapter->atapiCdb[8] = cdb[4];
888 padapter->atapiCdb[9] = cdb[5];
889 break;
890 case SCSIOP_WRITE6:
891 padapter->atapiCdb[0] = SCSIOP_WRITE;
892 padapter->atapiCdb[1] = cdb[1] & 0xE0;
893 padapter->atapiCdb[3] = cdb[1] & 0x1F;
894 padapter->atapiCdb[4] = cdb[2];
895 padapter->atapiCdb[5] = cdb[3];
896 padapter->atapiCdb[8] = cdb[4];
897 padapter->atapiCdb[9] = cdb[5];
898 break;
899 case SCSIOP_MODE_SENSE:
900 padapter->atapiCdb[0] = SCSIOP_MODE_SENSE10;
901 padapter->atapiCdb[2] = cdb[2];
902 padapter->atapiCdb[8] = cdb[4] + 4;
903 break;
904
905 case SCSIOP_MODE_SELECT:
906 padapter->atapiSpecial = TRUE;
907 padapter->atapiCdb[0] = SCSIOP_MODE_SELECT10;
908 padapter->atapiCdb[1] = cdb[1] | 0x10;
909 memcpy (padapter->kBuffer, buff, 4);
910 padapter->kBuffer[4] = padapter->kBuffer[5] = 0;
911 padapter->kBuffer[6] = padapter->kBuffer[7] = 0;
912 memcpy (&padapter->kBuffer[8], &buff[4], cdb[4] - 4);
913 padapter->atapiCdb[8] = cdb[4] + 4;
914 break;
915 }
916 }
917 /****************************************************************
918 * Name: AtapiSendCdb
919 *
920 * Description: Send the CDB packet to the device.
921 *
922 * Parameters: padapter - Pointer adapter data structure.
923 * pdev - Pointer to device.
924 * cdb - Pointer to 16 byte SCSI cdb.
925 *
926 * Returns: Nothing.
927 *
928 ****************************************************************/
AtapiSendCdb(PADAPTER2220I padapter,POUR_DEVICE pdev,CHAR * cdb)929 static void AtapiSendCdb (PADAPTER2220I padapter, POUR_DEVICE pdev, CHAR *cdb)
930 {
931 DEB (printk ("\nPCI2242I: CDB: %X %X %X %X %X %X %X %X %X %X %X %X", cdb[0], cdb[1], cdb[2], cdb[3], cdb[4], cdb[5], cdb[6], cdb[7], cdb[8], cdb[9], cdb[10], cdb[11]));
932 outsw (padapter->regData, cdb, pdev->packet);
933 }
934 /****************************************************************
935 * Name: AtapiRequestSense
936 *
937 * Description: Send the CDB packet to the device.
938 *
939 * Parameters: padapter - Pointer adapter data structure.
940 * pdev - Pointer to device.
941 * SCpnt - Pointer to SCSI command structure.
942 * pass - If true then this is the second pass to send cdb.
943 *
944 * Returns: TRUE on error.
945 *
946 ****************************************************************/
AtapiRequestSense(PADAPTER2220I padapter,POUR_DEVICE pdev,Scsi_Cmnd * SCpnt,UCHAR pass)947 static int AtapiRequestSense (PADAPTER2220I padapter, POUR_DEVICE pdev, Scsi_Cmnd *SCpnt, UCHAR pass)
948 {
949 UCHAR cdb[16] = {SCSIOP_REQUEST_SENSE,0,0,0,16,0,0,0,0,0,0,0,0,0,0,0};
950
951 DEB (printk ("\nPCI2242I: AUTO REQUEST SENSE"));
952 cdb[4] = (UCHAR)(sizeof (SCpnt->sense_buffer));
953 if ( !pass )
954 {
955 padapter->reqSense = TRUE;
956 AtapiCountLo (padapter, cdb[4]);
957 AtapiCountHi (padapter, 0);
958 outb_p (0, padapter->regError);
959 WriteCommand (padapter, IDE_COMMAND_ATAPI_PACKET);
960 if ( pdev->cmdDrqInt )
961 return FALSE;
962
963 if ( AtapiWaitDrq (padapter, 500) )
964 return TRUE;
965 }
966 AtapiSendCdb (padapter, pdev, cdb);
967 return FALSE;
968 }
969 /****************************************************************
970 * Name: InlineReadSignature :LOCAL
971 *
972 * Description: Do an inline read RAID sigature.
973 *
974 * Parameters: padapter - Pointer adapter data structure.
975 * pdev - Pointer to device.
976 * index - index of data to read.
977 *
978 * Returns: Zero if no error or status register contents on error.
979 *
980 ****************************************************************/
InlineReadSignature(PADAPTER2220I padapter,POUR_DEVICE pdev,int index)981 static UCHAR InlineReadSignature (PADAPTER2220I padapter, POUR_DEVICE pdev, int index)
982 {
983 UCHAR status;
984 ULONG zl = pdev->lastsectorlba[index];
985
986 SelectSpigot (padapter, pdev->spigots[index] | SEL_IRQ_OFF); // select the spigot without interrupts
987 outb_p (pdev->byte6 | ((UCHAR *)&zl)[3], padapter->regLba24);
988 status = WaitReady (padapter);
989 if ( !status )
990 {
991 outb_p (((UCHAR *)&zl)[2], padapter->regLba16);
992 outb_p (((UCHAR *)&zl)[1], padapter->regLba8);
993 outb_p (((UCHAR *)&zl)[0], padapter->regLba0);
994 outb_p (1, padapter->regSectCount);
995 WriteCommand (padapter, IDE_COMMAND_READ);
996 status = WaitDrq (padapter);
997 if ( !status )
998 {
999 insw (padapter->regData, padapter->kBuffer, BYTES_PER_SECTOR / 2);
1000 ((ULONG *)(&pdev->DiskMirror[index]))[0] = ((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[0];
1001 ((ULONG *)(&pdev->DiskMirror[index]))[1] = ((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[1];
1002 // some drives assert DRQ before IRQ so let's make sure we clear the IRQ
1003 WaitReady (padapter);
1004 return 0;
1005 }
1006 }
1007 return status;
1008 }
1009 /****************************************************************
1010 * Name: DecodeError :LOCAL
1011 *
1012 * Description: Decode and process device errors.
1013 *
1014 * Parameters: padapter - Pointer to adapter data.
1015 * status - Status register code.
1016 *
1017 * Returns: The driver status code.
1018 *
1019 ****************************************************************/
DecodeError(PADAPTER2220I padapter,UCHAR status)1020 static ULONG DecodeError (PADAPTER2220I padapter, UCHAR status)
1021 {
1022 UCHAR error;
1023
1024 padapter->expectingIRQ = 0;
1025 if ( status & IDE_STATUS_WRITE_FAULT )
1026 {
1027 return DID_PARITY << 16;
1028 }
1029 if ( status & IDE_STATUS_BUSY )
1030 return DID_BUS_BUSY << 16;
1031
1032 error = inb_p (padapter->regError);
1033 DEB(printk ("\npci2220i error register: %x", error));
1034 switch ( error )
1035 {
1036 case IDE_ERROR_AMNF:
1037 case IDE_ERROR_TKONF:
1038 case IDE_ERROR_ABRT:
1039 case IDE_ERROR_IDFN:
1040 case IDE_ERROR_UNC:
1041 case IDE_ERROR_BBK:
1042 default:
1043 return DID_ERROR << 16;
1044 }
1045 return DID_ERROR << 16;
1046 }
1047 /****************************************************************
1048 * Name: StartTimer :LOCAL
1049 *
1050 * Description: Start the timer.
1051 *
1052 * Parameters: ipadapter - Pointer adapter data structure.
1053 *
1054 * Returns: Nothing.
1055 *
1056 ****************************************************************/
StartTimer(PADAPTER2220I padapter)1057 static void StartTimer (PADAPTER2220I padapter)
1058 {
1059 padapter->timer.expires = jiffies + TIMEOUT_DATA;
1060 add_timer (&padapter->timer);
1061 }
1062 /****************************************************************
1063 * Name: WriteSignature :LOCAL
1064 *
1065 * Description: Start the timer.
1066 *
1067 * Parameters: padapter - Pointer adapter data structure.
1068 * pdev - Pointer to our device.
1069 * spigot - Selected spigot.
1070 * index - index of mirror signature on device.
1071 *
1072 * Returns: TRUE on any error.
1073 *
1074 ****************************************************************/
WriteSignature(PADAPTER2220I padapter,POUR_DEVICE pdev,UCHAR spigot,int index)1075 static int WriteSignature (PADAPTER2220I padapter, POUR_DEVICE pdev, UCHAR spigot, int index)
1076 {
1077 ULONG zl;
1078
1079 SelectSpigot (padapter, spigot);
1080 zl = pdev->lastsectorlba[index];
1081 outb_p (pdev->byte6 | ((UCHAR *)&zl)[3], padapter->regLba24);
1082 outb_p (((UCHAR *)&zl)[2], padapter->regLba16);
1083 outb_p (((UCHAR *)&zl)[1], padapter->regLba8);
1084 outb_p (((UCHAR *)&zl)[0], padapter->regLba0);
1085 outb_p (1, padapter->regSectCount);
1086
1087 WriteCommand (padapter, IDE_COMMAND_WRITE);
1088 if ( WaitDrq (padapter) )
1089 return TRUE;
1090 StartTimer (padapter);
1091 padapter->expectingIRQ = TRUE;
1092
1093 ((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[0] = ((ULONG *)(&pdev->DiskMirror[index]))[0];
1094 ((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[1] = ((ULONG *)(&pdev->DiskMirror[index]))[1];
1095 outsw (padapter->regData, padapter->kBuffer, BYTES_PER_SECTOR / 2);
1096 return FALSE;
1097 }
1098 /*******************************************************************************************************
1099 * Name: InitFailover
1100 *
1101 * Description: This is the beginning of the failover routine
1102 *
1103 * Parameters: SCpnt - Pointer to SCSI command structure.
1104 * padapter - Pointer adapter data structure.
1105 * pdev - Pointer to our device.
1106 *
1107 * Returns: TRUE on error.
1108 *
1109 ******************************************************************************************************/
InitFailover(PADAPTER2220I padapter,POUR_DEVICE pdev)1110 static int InitFailover (PADAPTER2220I padapter, POUR_DEVICE pdev)
1111 {
1112 UCHAR spigot;
1113
1114 DEB (printk ("\npci2220i: Initialize failover process - survivor = %d", pdev->deviceID[padapter->survivor]));
1115 pdev->raid = FALSE; //initializes system for non raid mode
1116 pdev->reconOn = FALSE;
1117 spigot = pdev->spigots[padapter->survivor];
1118
1119 if ( pdev->DiskMirror[padapter->survivor].status & UCBF_REBUILD )
1120 {
1121 DEB (printk ("\n failed, is survivor"));
1122 return (TRUE);
1123 }
1124
1125 if ( HardReset (padapter, pdev, spigot) )
1126 {
1127 DEB (printk ("\n failed, reset"));
1128 return TRUE;
1129 }
1130
1131 Alarm (padapter, pdev->deviceID[padapter->survivor ^ 1]);
1132 pdev->DiskMirror[padapter->survivor].status = UCBF_MIRRORED | UCBF_SURVIVOR; //clear present status
1133
1134 if ( WriteSignature (padapter, pdev, spigot, padapter->survivor) )
1135 {
1136 DEB (printk ("\n failed, write signature"));
1137 return TRUE;
1138 }
1139 padapter->failinprog = TRUE;
1140 return FALSE;
1141 }
1142 /****************************************************************
1143 * Name: TimerExpiry :LOCAL
1144 *
1145 * Description: Timer expiry routine.
1146 *
1147 * Parameters: data - Pointer adapter data structure.
1148 *
1149 * Returns: Nothing.
1150 *
1151 ****************************************************************/
TimerExpiry(unsigned long data)1152 static void TimerExpiry (unsigned long data)
1153 {
1154 PADAPTER2220I padapter = (PADAPTER2220I)data;
1155 POUR_DEVICE pdev = padapter->pdev;
1156 UCHAR status = IDE_STATUS_BUSY;
1157 UCHAR temp, temp1;
1158 unsigned long flags;
1159
1160 /*
1161 * Disable interrupts, if they aren't already disabled and acquire
1162 * the I/O spinlock.
1163 */
1164 spin_lock_irqsave (&io_request_lock, flags);
1165 DEB (printk ("\nPCI2220I: Timeout expired "));
1166
1167 if ( padapter->failinprog )
1168 {
1169 DEB (printk ("in failover process"));
1170 OpDone (padapter, DecodeError (padapter, inb_p (padapter->regStatCmd)));
1171 goto timerExpiryDone;
1172 }
1173
1174 while ( padapter->reconPhase )
1175 {
1176 DEB (printk ("in recon phase %X", padapter->reconPhase));
1177 switch ( padapter->reconPhase )
1178 {
1179 case RECON_PHASE_MARKING:
1180 case RECON_PHASE_LAST:
1181 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 1 : 0;
1182 DEB (printk ("\npci2220i: FAILURE 1"));
1183 if ( InitFailover (padapter, pdev) )
1184 OpDone (padapter, DID_ERROR << 16);
1185 goto timerExpiryDone;
1186
1187 case RECON_PHASE_READY:
1188 OpDone (padapter, DID_ERROR << 16);
1189 goto timerExpiryDone;
1190
1191 case RECON_PHASE_COPY:
1192 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
1193 DEB (printk ("\npci2220i: FAILURE 2"));
1194 DEB (printk ("\n spig/stat = %X", inb_p (padapter->regStatSel));
1195 if ( InitFailover (padapter, pdev) )
1196 OpDone (padapter, DID_ERROR << 16);
1197 goto timerExpiryDone;
1198
1199 case RECON_PHASE_UPDATE:
1200 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
1201 DEB (printk ("\npci2220i: FAILURE 3")));
1202 if ( InitFailover (padapter, pdev) )
1203 OpDone (padapter, DID_ERROR << 16);
1204 goto timerExpiryDone;
1205
1206 case RECON_PHASE_END:
1207 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
1208 DEB (printk ("\npci2220i: FAILURE 4"));
1209 if ( InitFailover (padapter, pdev) )
1210 OpDone (padapter, DID_ERROR << 16);
1211 goto timerExpiryDone;
1212
1213 default:
1214 goto timerExpiryDone;
1215 }
1216 }
1217
1218 while ( padapter->cmd )
1219 {
1220 outb_p (0x08, padapter->regDmaCmdStat); // cancel interrupt from DMA engine
1221 if ( pdev->raid )
1222 {
1223 if ( padapter->cmd == WRITE_CMD )
1224 {
1225 DEB (printk ("in RAID write operation"));
1226 temp = ( pdev->spigot & (SEL_1 | SEL_2) ) ? SEL_1 : SEL_3;
1227 if ( inb_p (padapter->regStatSel) & temp )
1228 {
1229 DEB (printk ("\npci2220i: Determined A OK"));
1230 SelectSpigot (padapter, temp | SEL_IRQ_OFF); // Masking the interrupt during spigot select
1231 temp = inb_p (padapter->regStatCmd);
1232 }
1233 else
1234 temp = IDE_STATUS_BUSY;
1235
1236 temp1 = ( pdev->spigot & (SEL_1 | SEL_2) ) ? SEL_2 : SEL_4;
1237 if ( inb (padapter->regStatSel) & temp1 )
1238 {
1239 DEB (printk ("\npci2220i: Determined B OK"));
1240 SelectSpigot (padapter, temp1 | SEL_IRQ_OFF); // Masking the interrupt during spigot select
1241 temp1 = inb_p (padapter->regStatCmd);
1242 }
1243 else
1244 temp1 = IDE_STATUS_BUSY;
1245
1246 if ( (temp & IDE_STATUS_BUSY) || (temp1 & IDE_STATUS_BUSY) )
1247 {
1248 DEB (printk ("\npci2220i: Status A: %X B: %X", temp & 0xFF, temp1 & 0xFF));
1249 if ( (temp & IDE_STATUS_BUSY) && (temp1 & IDE_STATUS_BUSY) )
1250 {
1251 status = temp;
1252 break;
1253 }
1254 else
1255 {
1256 if ( temp & IDE_STATUS_BUSY )
1257 padapter->survivor = 1;
1258 else
1259 padapter->survivor = 0;
1260 if ( InitFailover (padapter, pdev) )
1261 {
1262 status = inb_p (padapter->regStatCmd);
1263 break;
1264 }
1265 goto timerExpiryDone;
1266 }
1267 }
1268 }
1269 else
1270 {
1271 DEB (printk ("in RAID read operation"));
1272 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
1273 DEB (printk ("\npci2220i: FAILURE 6"));
1274 if ( InitFailover (padapter, pdev) )
1275 {
1276 status = inb_p (padapter->regStatCmd);
1277 break;
1278 }
1279 goto timerExpiryDone;
1280 }
1281 }
1282 else
1283 {
1284 DEB (printk ("in I/O operation"));
1285 status = inb_p (padapter->regStatCmd);
1286 }
1287 break;
1288 }
1289
1290 OpDone (padapter, DecodeError (padapter, status));
1291
1292 timerExpiryDone:;
1293 /*
1294 * Release the I/O spinlock and restore the original flags
1295 * which will enable interrupts if and only if they were
1296 * enabled on entry.
1297 */
1298 spin_unlock_irqrestore (&io_request_lock, flags);
1299 }
1300 /****************************************************************
1301 * Name: SetReconstruct :LOCAL
1302 *
1303 * Description: Set the reconstruct up.
1304 *
1305 * Parameters: pdev - Pointer to device structure.
1306 * index - Mirror index number.
1307 *
1308 * Returns: Number of sectors on new disk required.
1309 *
1310 ****************************************************************/
SetReconstruct(POUR_DEVICE pdev,int index)1311 static LONG SetReconstruct (POUR_DEVICE pdev, int index)
1312 {
1313 pdev->DiskMirror[index].status = UCBF_MIRRORED; // setup the flags
1314 pdev->DiskMirror[index ^ 1].status = UCBF_MIRRORED | UCBF_REBUILD;
1315 pdev->DiskMirror[index ^ 1].reconstructPoint = 0; // start the reconstruct
1316 pdev->reconCount = 1990; // mark target drive early
1317 return pdev->DiskMirror[index].reconstructPoint;
1318 }
1319 /****************************************************************
1320 * Name: ReconTimerExpiry :LOCAL
1321 *
1322 * Description: Reconstruct timer expiry routine.
1323 *
1324 * Parameters: data - Pointer adapter data structure.
1325 *
1326 * Returns: Nothing.
1327 *
1328 ****************************************************************/
ReconTimerExpiry(unsigned long data)1329 static void ReconTimerExpiry (unsigned long data)
1330 {
1331 PADAPTER2220I padapter;
1332 POUR_DEVICE pdev;
1333 ULONG testsize = 0;
1334 PIDENTIFY_DATA pid;
1335 USHORT minmode;
1336 ULONG zl;
1337 UCHAR zc;
1338 USHORT z;
1339 unsigned long flags;
1340
1341 /*
1342 * Disable interrupts, if they aren't already disabled and acquire
1343 * the I/O spinlock.
1344 */
1345 spin_lock_irqsave (&io_request_lock, flags);
1346
1347 padapter = (PADAPTER2220I)data;
1348 if ( padapter->SCpnt )
1349 goto reconTimerExpiry;
1350
1351 padapter->reconTimer.data = 0;
1352 for ( z = padapter->devInReconIndex + 1; z < BIGD_MAXDRIVES; z++ )
1353 {
1354 if ( padapter->device[z].reconOn )
1355 break;
1356 }
1357 if ( z < BIGD_MAXDRIVES )
1358 pdev = &padapter->device[z];
1359 else
1360 {
1361 for ( z = 0; z < BIGD_MAXDRIVES; z++ )
1362 {
1363 if ( padapter->device[z].reconOn )
1364 break;
1365 }
1366 if ( z < BIGD_MAXDRIVES )
1367 pdev = &padapter->device[z];
1368 else
1369 {
1370 padapter->reconOn = FALSE;
1371 goto reconTimerExpiry;
1372 }
1373 }
1374
1375 padapter->devInReconIndex = z;
1376 pid = (PIDENTIFY_DATA)padapter->kBuffer;
1377 padapter->pdev = pdev;
1378 if ( pdev->reconIsStarting )
1379 {
1380 pdev->reconIsStarting = FALSE;
1381 pdev->reconOn = FALSE;
1382
1383 while ( (pdev->DiskMirror[0].signature == SIGNATURE) && (pdev->DiskMirror[1].signature == SIGNATURE) &&
1384 (pdev->DiskMirror[0].pairIdentifier == (pdev->DiskMirror[1].pairIdentifier ^ 1)) )
1385 {
1386 if ( (pdev->DiskMirror[0].status & UCBF_MATCHED) && (pdev->DiskMirror[1].status & UCBF_MATCHED) )
1387 break;;
1388
1389 if ( pdev->DiskMirror[0].status & UCBF_SURVIVOR ) // is first drive survivor?
1390 testsize = SetReconstruct (pdev, 0);
1391 else
1392 if ( pdev->DiskMirror[1].status & UCBF_SURVIVOR ) // is second drive survivor?
1393 testsize = SetReconstruct (pdev, 1);
1394
1395 if ( (pdev->DiskMirror[0].status & UCBF_REBUILD) || (pdev->DiskMirror[1].status & UCBF_REBUILD) )
1396 {
1397 if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
1398 pdev->mirrorRecon = 0;
1399 else
1400 pdev->mirrorRecon = 1;
1401 pdev->reconOn = TRUE;
1402 }
1403 break;
1404 }
1405
1406 if ( !pdev->reconOn )
1407 goto reconTimerExpiry;
1408
1409 if ( padapter->bigD )
1410 {
1411 padapter->failRegister = 0;
1412 outb_p (~padapter->failRegister, padapter->regFail);
1413 }
1414 else
1415 {
1416 zc = ((inb_p (padapter->regStatSel) >> 3) | inb_p (padapter->regStatSel)) & 0x83; // mute the alarm
1417 outb_p (0xFF, padapter->regFail);
1418 }
1419
1420 while ( 1 )
1421 {
1422 DEB (printk ("\npci2220i: hard reset issue"));
1423 if ( HardReset (padapter, pdev, pdev->spigots[pdev->mirrorRecon]) )
1424 {
1425 DEB (printk ("\npci2220i: sub 1"));
1426 break;
1427 }
1428
1429 pdev->lastsectorlba[pdev->mirrorRecon] = InlineIdentify (padapter, pdev->spigots[pdev->mirrorRecon], pdev->deviceID[pdev->mirrorRecon] & 1);
1430
1431 if ( pdev->lastsectorlba[pdev->mirrorRecon] < testsize )
1432 {
1433 DEB (printk ("\npci2220i: sub 2 %ld %ld", pdev->lastsectorlba[pdev->mirrorRecon], testsize));
1434 break;
1435 }
1436
1437 // test LBA and multiper sector transfer compatability
1438 if (!pid->SupportLBA || (pid->NumSectorsPerInt < SECTORSXFER) || !pid->Valid_64_70 )
1439 {
1440 DEB (printk ("\npci2220i: sub 3"));
1441 break;
1442 }
1443
1444 // test PIO/bus matering mode compatability
1445 if ( (pid->MinPIOCycleWithoutFlow > 240) && !pid->SupportIORDYDisable && !padapter->timingPIO )
1446 {
1447 DEB (printk ("\npci2220i: sub 4"));
1448 break;
1449 }
1450
1451 if ( pid->MinPIOCycleWithoutFlow <= 120 ) // setup timing mode of drive
1452 minmode = 5;
1453 else
1454 {
1455 if ( pid->MinPIOCylceWithFlow <= 150 )
1456 minmode = 4;
1457 else
1458 {
1459 if ( pid->MinPIOCylceWithFlow <= 180 )
1460 minmode = 3;
1461 else
1462 {
1463 if ( pid->MinPIOCylceWithFlow <= 240 )
1464 minmode = 2;
1465 else
1466 {
1467 DEB (printk ("\npci2220i: sub 5"));
1468 break;
1469 }
1470 }
1471 }
1472 }
1473
1474 if ( padapter->timingMode > minmode ) // set minimum timing mode
1475 padapter->timingMode = minmode;
1476 if ( padapter->timingMode >= 2 )
1477 padapter->timingAddress = ModeArray[padapter->timingMode - 2];
1478 else
1479 padapter->timingPIO = TRUE;
1480
1481 padapter->reconOn = TRUE;
1482 break;
1483 }
1484
1485 if ( !pdev->reconOn )
1486 {
1487 padapter->survivor = pdev->mirrorRecon ^ 1;
1488 padapter->reconPhase = RECON_PHASE_FAILOVER;
1489 DEB (printk ("\npci2220i: FAILURE 7"));
1490 InitFailover (padapter, pdev);
1491 goto reconTimerExpiry;
1492 }
1493
1494 pdev->raid = TRUE;
1495
1496 if ( WriteSignature (padapter, pdev, pdev->spigot, pdev->mirrorRecon ^ 1) )
1497 goto reconTimerExpiry;
1498 padapter->reconPhase = RECON_PHASE_MARKING;
1499 goto reconTimerExpiry;
1500 }
1501
1502 //**********************************
1503 // reconstruct copy starts here
1504 //**********************************
1505 if ( pdev->reconCount++ > 2000 )
1506 {
1507 pdev->reconCount = 0;
1508 if ( WriteSignature (padapter, pdev, pdev->spigots[pdev->mirrorRecon], pdev->mirrorRecon) )
1509 {
1510 padapter->survivor = pdev->mirrorRecon ^ 1;
1511 padapter->reconPhase = RECON_PHASE_FAILOVER;
1512 DEB (printk ("\npci2220i: FAILURE 8"));
1513 InitFailover (padapter, pdev);
1514 goto reconTimerExpiry;
1515 }
1516 padapter->reconPhase = RECON_PHASE_UPDATE;
1517 goto reconTimerExpiry;
1518 }
1519
1520 zl = pdev->DiskMirror[pdev->mirrorRecon].reconstructPoint;
1521 padapter->reconSize = pdev->DiskMirror[pdev->mirrorRecon ^ 1].reconstructPoint - zl;
1522 if ( padapter->reconSize > MAX_BUS_MASTER_BLOCKS )
1523 padapter->reconSize = MAX_BUS_MASTER_BLOCKS;
1524
1525 if ( padapter->reconSize )
1526 {
1527 SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1]); // select the spigots
1528 outb_p (pdev->byte6 | ((UCHAR *)(&zl))[3], padapter->regLba24); // select the drive
1529 SelectSpigot (padapter, pdev->spigot);
1530 if ( WaitReady (padapter) )
1531 goto reconTimerExpiry;
1532
1533 SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon]);
1534 if ( WaitReady (padapter) )
1535 {
1536 padapter->survivor = pdev->mirrorRecon ^ 1;
1537 padapter->reconPhase = RECON_PHASE_FAILOVER;
1538 DEB (printk ("\npci2220i: FAILURE 9"));
1539 InitFailover (padapter, pdev);
1540 goto reconTimerExpiry;
1541 }
1542
1543 SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1]);
1544 outb_p (padapter->reconSize & 0xFF, padapter->regSectCount);
1545 outb_p (((UCHAR *)(&zl))[0], padapter->regLba0);
1546 outb_p (((UCHAR *)(&zl))[1], padapter->regLba8);
1547 outb_p (((UCHAR *)(&zl))[2], padapter->regLba16);
1548 padapter->expectingIRQ = TRUE;
1549 padapter->reconPhase = RECON_PHASE_READY;
1550 SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon]);
1551 WriteCommand (padapter, WRITE_CMD);
1552 StartTimer (padapter);
1553 SelectSpigot (padapter, pdev->spigot);
1554 WriteCommand (padapter, READ_CMD);
1555 goto reconTimerExpiry;
1556 }
1557
1558 pdev->DiskMirror[pdev->mirrorRecon].status = UCBF_MIRRORED | UCBF_MATCHED;
1559 pdev->DiskMirror[pdev->mirrorRecon ^ 1].status = UCBF_MIRRORED | UCBF_MATCHED;
1560 if ( WriteSignature (padapter, pdev, pdev->spigot, pdev->mirrorRecon ^ 1) )
1561 goto reconTimerExpiry;
1562 padapter->reconPhase = RECON_PHASE_LAST;
1563
1564 reconTimerExpiry:;
1565 /*
1566 * Release the I/O spinlock and restore the original flags
1567 * which will enable interrupts if and only if they were
1568 * enabled on entry.
1569 */
1570 spin_unlock_irqrestore (&io_request_lock, flags);
1571 }
1572 /****************************************************************
1573 * Name: Irq_Handler :LOCAL
1574 *
1575 * Description: Interrupt handler.
1576 *
1577 * Parameters: irq - Hardware IRQ number.
1578 * dev_id -
1579 * regs -
1580 *
1581 * Returns: TRUE if drive is not ready in time.
1582 *
1583 ****************************************************************/
Irq_Handler(int irq,void * dev_id,struct pt_regs * regs)1584 static void Irq_Handler (int irq, void *dev_id, struct pt_regs *regs)
1585 {
1586 struct Scsi_Host *shost = NULL; // Pointer to host data block
1587 PADAPTER2220I padapter; // Pointer to adapter control structure
1588 POUR_DEVICE pdev;
1589 Scsi_Cmnd *SCpnt;
1590 UCHAR status;
1591 UCHAR status1;
1592 ATAPI_STATUS statusa;
1593 ATAPI_REASON reasona;
1594 ATAPI_ERROR errora;
1595 int z;
1596 ULONG zl;
1597 unsigned long flags;
1598
1599 /*
1600 * Disable interrupts, if they aren't already disabled and acquire
1601 * the I/O spinlock.
1602 */
1603 spin_lock_irqsave (&io_request_lock, flags);
1604
1605 // DEB (printk ("\npci2220i received interrupt\n"));
1606
1607 for ( z = 0; z < NumAdapters; z++ ) // scan for interrupt to process
1608 {
1609 if ( PsiHost[z]->irq == (UCHAR)(irq & 0xFF) )
1610 {
1611 if ( inw_p (HOSTDATA(PsiHost[z])->regIrqControl) & 0x8000 )
1612 {
1613 shost = PsiHost[z];
1614 break;
1615 }
1616 }
1617 }
1618
1619 if ( !shost )
1620 {
1621 DEB (printk ("\npci2220i: not my interrupt"));
1622 goto irq_return;
1623 }
1624
1625 padapter = HOSTDATA(shost);
1626 pdev = padapter->pdev;
1627 SCpnt = padapter->SCpnt;
1628 outb_p (0x08, padapter->regDmaCmdStat); // cancel interrupt from DMA engine
1629
1630 if ( padapter->atapi && SCpnt )
1631 {
1632 *(char *)&statusa = inb_p (padapter->regStatCmd); // read the device status
1633 *(char *)&reasona = inb_p (padapter->regSectCount); // read the device interrupt reason
1634
1635 if ( !statusa.bsy )
1636 {
1637 if ( statusa.drq ) // test for transfer phase
1638 {
1639 if ( !reasona.cod ) // test for data phase
1640 {
1641 z = (ULONG)inb_p (padapter->regLba8) | (ULONG)(inb_p (padapter->regLba16) << 8);
1642 if ( padapter->reqSense )
1643 insw (padapter->regData, SCpnt->sense_buffer, z / 2);
1644 else
1645 AtapiBusMaster (padapter, reasona.io, z);
1646 goto irq_return;
1647 }
1648 if ( reasona.cod && !reasona.io ) // test for command packet phase
1649 {
1650 if ( padapter->reqSense )
1651 AtapiRequestSense (padapter, pdev, SCpnt, TRUE);
1652 else
1653 AtapiSendCdb (padapter, pdev, padapter->atapiCdb);
1654 goto irq_return;
1655 }
1656 }
1657 else
1658 {
1659 if ( reasona.io && statusa.drdy ) // test for status phase
1660 {
1661 Atapi2Scsi (padapter, SCpnt);
1662 if ( statusa.check )
1663 {
1664 *(UCHAR *)&errora = inb_p (padapter->regError); // read the device error
1665 if ( errora.senseKey )
1666 {
1667 if ( padapter->reqSense || AtapiRequestSense (padapter, pdev, SCpnt, FALSE) )
1668 OpDone (padapter, DID_ERROR << 16);
1669 }
1670 else
1671 {
1672 if ( errora.ili || errora.abort )
1673 OpDone (padapter, DID_ERROR << 16);
1674 else
1675 OpDone (padapter, DID_OK << 16);
1676 }
1677 }
1678 else
1679 if ( padapter->reqSense )
1680 {
1681 DEB (printk ("PCI2242I: Sense codes - %X %X %X ", ((UCHAR *)SCpnt->sense_buffer)[0], ((UCHAR *)SCpnt->sense_buffer)[12], ((UCHAR *)SCpnt->sense_buffer)[13]));
1682 OpDone (padapter, (DRIVER_SENSE << 24) | (DID_OK << 16) | 2);
1683 }
1684 else
1685 OpDone (padapter, DID_OK << 16);
1686 }
1687 }
1688 }
1689 goto irq_return;
1690 }
1691
1692 if ( !padapter->expectingIRQ || !(SCpnt || padapter->reconPhase) )
1693 {
1694 DEB(printk ("\npci2220i Unsolicited interrupt\n"));
1695 STOP_HERE ();
1696 goto irq_return;
1697 }
1698 padapter->expectingIRQ = 0;
1699
1700 if ( padapter->failinprog )
1701 {
1702 DEB (printk ("\npci2220i interrupt failover complete"));
1703 padapter->failinprog = FALSE;
1704 status = inb_p (padapter->regStatCmd); // read the device status
1705 if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
1706 {
1707 DEB (printk ("\npci2220i: interrupt failover error from drive %X", status));
1708 padapter->cmd = 0;
1709 }
1710 else
1711 {
1712 DEB (printk ("\npci2220i: restarting failed opertation."));
1713 pdev->spigot = (padapter->survivor) ? pdev->spigots[1] : pdev->spigots[0];
1714 del_timer (&padapter->timer);
1715 if ( padapter->reconPhase )
1716 OpDone (padapter, DID_OK << 16);
1717 else
1718 Pci2220i_QueueCommand (SCpnt, SCpnt->scsi_done);
1719 goto irq_return;
1720 }
1721 }
1722
1723 if ( padapter->reconPhase )
1724 {
1725 switch ( padapter->reconPhase )
1726 {
1727 case RECON_PHASE_MARKING:
1728 case RECON_PHASE_LAST:
1729 status = inb_p (padapter->regStatCmd); // read the device status
1730 del_timer (&padapter->timer);
1731 if ( padapter->reconPhase == RECON_PHASE_LAST )
1732 {
1733 if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
1734 {
1735 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 1 : 0;
1736 DEB (printk ("\npci2220i: FAILURE 10"));
1737 if ( InitFailover (padapter, pdev) )
1738 OpDone (padapter, DecodeError (padapter, status));
1739 goto irq_return;
1740 }
1741 if ( WriteSignature (padapter, pdev, pdev->spigots[pdev->mirrorRecon], pdev->mirrorRecon) )
1742 {
1743 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
1744 DEB (printk ("\npci2220i: FAILURE 11"));
1745 if ( InitFailover (padapter, pdev) )
1746 OpDone (padapter, DecodeError (padapter, status));
1747 goto irq_return;
1748 }
1749 padapter->reconPhase = RECON_PHASE_END;
1750 goto irq_return;
1751 }
1752 OpDone (padapter, DID_OK << 16);
1753 goto irq_return;
1754
1755 case RECON_PHASE_READY:
1756 status = inb_p (padapter->regStatCmd); // read the device status
1757 if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
1758 {
1759 del_timer (&padapter->timer);
1760 OpDone (padapter, DecodeError (padapter, status));
1761 goto irq_return;
1762 }
1763 SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon]);
1764 if ( WaitDrq (padapter) )
1765 {
1766 del_timer (&padapter->timer);
1767 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
1768 DEB (printk ("\npci2220i: FAILURE 12"));
1769 if ( InitFailover (padapter, pdev) )
1770 OpDone (padapter, DecodeError (padapter, status));
1771 goto irq_return;
1772 }
1773 SelectSpigot (padapter, pdev->spigot | SEL_COPY | padapter->bigD);
1774 padapter->reconPhase = RECON_PHASE_COPY;
1775 padapter->expectingIRQ = TRUE;
1776 if ( padapter->timingPIO )
1777 {
1778 insw (padapter->regData, padapter->kBuffer, padapter->reconSize * (BYTES_PER_SECTOR / 2));
1779 }
1780 else
1781 {
1782 if ( (padapter->timingMode > 3) )
1783 {
1784 if ( padapter->bigD )
1785 outl (BIGD_DATA_MODE3, padapter->regDmaAddrLoc);
1786 else
1787 outl (DALE_DATA_MODE3, padapter->regDmaAddrLoc);
1788 }
1789 else
1790 outl (padapter->timingAddress, padapter->regDmaAddrLoc);
1791 outl (padapter->kBufferDma, padapter->regDmaAddrPci);
1792 outl (padapter->reconSize * BYTES_PER_SECTOR, padapter->regDmaCount);
1793 outb_p (8, padapter->regDmaDesc); // read operation
1794 if ( padapter->bigD )
1795 outb_p (8, padapter->regDmaMode); // no interrupt
1796 else
1797 outb_p (1, padapter->regDmaMode); // no interrupt
1798 outb_p (0x03, padapter->regDmaCmdStat); // kick the DMA engine in gear
1799 }
1800 goto irq_return;
1801
1802 case RECON_PHASE_COPY:
1803 pdev->DiskMirror[pdev->mirrorRecon].reconstructPoint += padapter->reconSize;
1804
1805 case RECON_PHASE_UPDATE:
1806 SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon] | SEL_IRQ_OFF);
1807 status = inb_p (padapter->regStatCmd); // read the device status
1808 del_timer (&padapter->timer);
1809 if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
1810 {
1811 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
1812 DEB (printk ("\npci2220i: FAILURE 13"));
1813 DEB (printk ("\n status register = %X error = %X", status, inb_p (padapter->regError)));
1814 if ( InitFailover (padapter, pdev) )
1815 OpDone (padapter, DecodeError (padapter, status));
1816 goto irq_return;
1817 }
1818 OpDone (padapter, DID_OK << 16);
1819 goto irq_return;
1820
1821 case RECON_PHASE_END:
1822 status = inb_p (padapter->regStatCmd); // read the device status
1823 del_timer (&padapter->timer);
1824 if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
1825 {
1826 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1;
1827 DEB (printk ("\npci2220i: FAILURE 14"));
1828 if ( InitFailover (padapter, pdev) )
1829 OpDone (padapter, DecodeError (padapter, status));
1830 goto irq_return;
1831 }
1832 pdev->reconOn = 0;
1833 if ( padapter->bigD )
1834 {
1835 for ( z = 0; z < padapter->numberOfDrives; z++ )
1836 {
1837 if ( padapter->device[z].DiskMirror[0].status & UCBF_SURVIVOR )
1838 {
1839 Alarm (padapter, padapter->device[z].deviceID[0] ^ 2);
1840 MuteAlarm (padapter);
1841 }
1842 if ( padapter->device[z].DiskMirror[1].status & UCBF_SURVIVOR )
1843 {
1844 Alarm (padapter, padapter->device[z].deviceID[1] ^ 2);
1845 MuteAlarm (padapter);
1846 }
1847 }
1848 }
1849 OpDone (padapter, DID_OK << 16);
1850 goto irq_return;
1851
1852 default:
1853 goto irq_return;
1854 }
1855 }
1856
1857 switch ( padapter->cmd ) // decide how to handle the interrupt
1858 {
1859 case READ_CMD:
1860 if ( padapter->sectorCount )
1861 {
1862 status = inb_p (padapter->regStatCmd); // read the device status
1863 if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
1864 {
1865 if ( pdev->raid )
1866 {
1867 padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 1 : 0;
1868 del_timer (&padapter->timer);
1869 DEB (printk ("\npci2220i: FAILURE 15"));
1870 if ( !InitFailover (padapter, pdev) )
1871 goto irq_return;
1872 }
1873 break;
1874 }
1875 if ( padapter->timingPIO )
1876 {
1877 insw (padapter->regData, padapter->kBuffer, padapter->readCount / 2);
1878 padapter->sectorCount -= padapter->readCount / BYTES_PER_SECTOR;
1879 WalkScatGath (padapter, TRUE, padapter->readCount);
1880 if ( !padapter->sectorCount )
1881 {
1882 status = 0;
1883 break;
1884 }
1885 }
1886 else
1887 {
1888 if ( padapter->readCount )
1889 WalkScatGath (padapter, TRUE, padapter->readCount);
1890 BusMaster (padapter, 1, 1);
1891 }
1892 padapter->expectingIRQ = TRUE;
1893 goto irq_return;
1894 }
1895 if ( padapter->readCount && !padapter->timingPIO )
1896 WalkScatGath (padapter, TRUE, padapter->readCount);
1897 status = 0;
1898 break;
1899
1900 case WRITE_CMD:
1901 if ( pdev->raid )
1902 {
1903 SelectSpigot (padapter, pdev->spigots[0] | SEL_IRQ_OFF);
1904 status = inb_p (padapter->regStatCmd); // read the device status
1905 SelectSpigot (padapter, pdev->spigots[1] | SEL_IRQ_OFF);
1906 status1 = inb_p (padapter->regStatCmd); // read the device status
1907 }
1908 else
1909 SelectSpigot (padapter, pdev->spigot | SEL_IRQ_OFF);
1910 status = inb_p (padapter->regStatCmd); // read the device status
1911 status1 = 0;
1912
1913 if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
1914 {
1915 if ( pdev->raid && !(status1 & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT)) )
1916 {
1917 padapter->survivor = 1;
1918 del_timer (&padapter->timer);
1919 SelectSpigot (padapter, pdev->spigot | SEL_IRQ_OFF);
1920 DEB (printk ("\npci2220i: FAILURE 16 status = %X error = %X", status, inb_p (padapter->regError)));
1921 if ( !InitFailover (padapter, pdev) )
1922 goto irq_return;
1923 }
1924 break;
1925 }
1926 if ( pdev->raid )
1927 {
1928 if ( status1 & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
1929 {
1930 padapter->survivor = 0;
1931 del_timer (&padapter->timer);
1932 DEB (printk ("\npci2220i: FAILURE 17 status = %X error = %X", status1, inb_p (padapter->regError)));
1933 if ( !InitFailover (padapter, pdev) )
1934 goto irq_return;
1935 status = status1;
1936 break;
1937 }
1938 if ( padapter->sectorCount )
1939 {
1940 status = WriteDataBoth (padapter, pdev);
1941 if ( status )
1942 {
1943 padapter->survivor = status >> 1;
1944 del_timer (&padapter->timer);
1945 DEB (printk ("\npci2220i: FAILURE 18"));
1946 if ( !InitFailover (padapter, pdev) )
1947 goto irq_return;
1948 SelectSpigot (padapter, pdev->spigots[status] | SEL_IRQ_OFF);
1949 status = inb_p (padapter->regStatCmd); // read the device status
1950 break;
1951 }
1952 padapter->expectingIRQ = TRUE;
1953 goto irq_return;
1954 }
1955 status = 0;
1956 break;
1957 }
1958 if ( padapter->sectorCount )
1959 {
1960 SelectSpigot (padapter, pdev->spigot | padapter->bigD);
1961 status = WriteData (padapter);
1962 if ( status )
1963 break;
1964 padapter->expectingIRQ = TRUE;
1965 goto irq_return;
1966 }
1967 status = 0;
1968 break;
1969
1970 case IDE_COMMAND_IDENTIFY:
1971 {
1972 PINQUIRYDATA pinquiryData = SCpnt->request_buffer;
1973 PIDENTIFY_DATA pid = (PIDENTIFY_DATA)padapter->kBuffer;
1974
1975 status = inb_p (padapter->regStatCmd);
1976 if ( status & IDE_STATUS_DRQ )
1977 {
1978 insw (padapter->regData, pid, sizeof (IDENTIFY_DATA) >> 1);
1979
1980 memset (pinquiryData, 0, SCpnt->request_bufflen); // Zero INQUIRY data structure.
1981 pinquiryData->DeviceType = 0;
1982 pinquiryData->Versions = 2;
1983 pinquiryData->AdditionalLength = 35 - 4;
1984
1985 // Fill in vendor identification fields.
1986 for ( z = 0; z < 20; z += 2 )
1987 {
1988 pinquiryData->VendorId[z] = ((UCHAR *)pid->ModelNumber)[z + 1];
1989 pinquiryData->VendorId[z + 1] = ((UCHAR *)pid->ModelNumber)[z];
1990 }
1991
1992 // Initialize unused portion of product id.
1993 for ( z = 0; z < 4; z++ )
1994 pinquiryData->ProductId[12 + z] = ' ';
1995
1996 // Move firmware revision from IDENTIFY data to
1997 // product revision in INQUIRY data.
1998 for ( z = 0; z < 4; z += 2 )
1999 {
2000 pinquiryData->ProductRevisionLevel[z] = ((UCHAR *)pid->FirmwareRevision)[z + 1];
2001 pinquiryData->ProductRevisionLevel[z + 1] = ((UCHAR *)pid->FirmwareRevision)[z];
2002 }
2003 if ( pdev == padapter->device )
2004 *((USHORT *)(&pinquiryData->VendorSpecific)) = DEVICE_DALE_1;
2005
2006 status = 0;
2007 }
2008 break;
2009 }
2010
2011 default:
2012 status = 0;
2013 break;
2014 }
2015
2016 del_timer (&padapter->timer);
2017 if ( status )
2018 {
2019 DEB (printk ("\npci2220i Interrupt handler return error"));
2020 zl = DecodeError (padapter, status);
2021 }
2022 else
2023 zl = DID_OK << 16;
2024
2025 OpDone (padapter, zl);
2026 irq_return:;
2027 /*
2028 * Release the I/O spinlock and restore the original flags
2029 * which will enable interrupts if and only if they were
2030 * enabled on entry.
2031 */
2032 spin_unlock_irqrestore (&io_request_lock, flags);
2033 }
2034 /****************************************************************
2035 * Name: Pci2220i_QueueCommand
2036 *
2037 * Description: Process a queued command from the SCSI manager.
2038 *
2039 * Parameters: SCpnt - Pointer to SCSI command structure.
2040 * done - Pointer to done function to call.
2041 *
2042 * Returns: Status code.
2043 *
2044 ****************************************************************/
Pci2220i_QueueCommand(Scsi_Cmnd * SCpnt,void (* done)(Scsi_Cmnd *))2045 int Pci2220i_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
2046 {
2047 UCHAR *cdb = (UCHAR *)SCpnt->cmnd; // Pointer to SCSI CDB
2048 PADAPTER2220I padapter = HOSTDATA(SCpnt->host); // Pointer to adapter control structure
2049 POUR_DEVICE pdev = &padapter->device[SCpnt->target];// Pointer to device information
2050 UCHAR rc; // command return code
2051 int z;
2052 PDEVICE_RAID1 pdr;
2053
2054 SCpnt->scsi_done = done;
2055 padapter->SCpnt = SCpnt; // Save this command data
2056 padapter->readCount = 0;
2057
2058 if ( SCpnt->use_sg )
2059 {
2060 padapter->currentSgBuffer = ((struct scatterlist *)SCpnt->request_buffer)[0].address;
2061 padapter->currentSgCount = ((struct scatterlist *)SCpnt->request_buffer)[0].length;
2062 }
2063 else
2064 {
2065 padapter->currentSgBuffer = SCpnt->request_buffer;
2066 padapter->currentSgCount = SCpnt->request_bufflen;
2067 }
2068 padapter->nextSg = 1;
2069
2070 if ( !done )
2071 {
2072 printk("pci2220i_queuecommand: %02X: done can't be NULL\n", *cdb);
2073 return 0;
2074 }
2075
2076 if ( padapter->atapi )
2077 {
2078 UCHAR zlo, zhi;
2079
2080 DEB (printk ("\nPCI2242I: ID %d, LUN %d opcode %X ", SCpnt->target, SCpnt->lun, *cdb));
2081 padapter->pdev = pdev;
2082 if ( !pdev->byte6 || SCpnt->lun )
2083 {
2084 OpDone (padapter, DID_BAD_TARGET << 16);
2085 return 0;
2086 }
2087
2088 padapter->atapiSpecial = FALSE;
2089 padapter->reqSense = FALSE;
2090 memset (padapter->atapiCdb, 0, 16);
2091 SelectSpigot (padapter, pdev->spigot); // select the spigot
2092 AtapiDevice (padapter, pdev->byte6); // select the drive
2093 if ( AtapiWaitReady (padapter, 100) )
2094 {
2095 OpDone (padapter, DID_NO_CONNECT << 16);
2096 return 0;
2097 }
2098
2099 switch ( cdb[0] )
2100 {
2101 case SCSIOP_MODE_SENSE:
2102 case SCSIOP_MODE_SELECT:
2103 Scsi2Atapi (padapter, SCpnt);
2104 z = SCpnt->request_bufflen + 4;
2105 break;
2106 case SCSIOP_READ6:
2107 case SCSIOP_WRITE6:
2108 Scsi2Atapi (padapter, SCpnt);
2109 z = SCpnt->request_bufflen;
2110 break;
2111 default:
2112 memcpy (padapter->atapiCdb, cdb, SCpnt->cmd_len);
2113 z = SCpnt->request_bufflen;
2114 break;
2115 }
2116 if ( z > ATAPI_TRANSFER )
2117 z = ATAPI_TRANSFER;
2118 zlo = (UCHAR)(z & 0xFF);
2119 zhi = (UCHAR)(z >> 8);
2120
2121 AtapiCountLo (padapter, zlo);
2122 AtapiCountHi (padapter, zhi);
2123 outb_p (0, padapter->regError);
2124 WriteCommand (padapter, IDE_COMMAND_ATAPI_PACKET);
2125 if ( pdev->cmdDrqInt )
2126 return 0;
2127
2128 if ( AtapiWaitDrq (padapter, 500) )
2129 {
2130 OpDone (padapter, DID_ERROR << 16);
2131 return 0;
2132 }
2133 AtapiSendCdb (padapter, pdev, padapter->atapiCdb);
2134 return 0;
2135 }
2136
2137 if ( padapter->reconPhase )
2138 return 0;
2139 if ( padapter->reconTimer.data )
2140 {
2141 del_timer (&padapter->reconTimer);
2142 padapter->reconTimer.data = 0;
2143 }
2144
2145 if ( (SCpnt->target >= padapter->numberOfDrives) || SCpnt->lun )
2146 {
2147 OpDone (padapter, DID_BAD_TARGET << 16);
2148 return 0;
2149 }
2150
2151 switch ( *cdb )
2152 {
2153 case SCSIOP_INQUIRY: // inquiry CDB
2154 {
2155 if ( cdb[2] == SC_MY_RAID )
2156 {
2157 switch ( cdb[3] )
2158 {
2159 case MY_SCSI_REBUILD:
2160 for ( z = 0; z < padapter->numberOfDrives; z++ )
2161 {
2162 pdev = &padapter->device[z];
2163 if ( ((pdev->DiskMirror[0].status & UCBF_SURVIVOR) && (pdev->DiskMirror[1].status & UCBF_MIRRORED)) ||
2164 ((pdev->DiskMirror[1].status & UCBF_SURVIVOR) && (pdev->DiskMirror[0].status & UCBF_MIRRORED)) )
2165 {
2166 padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE;
2167 }
2168 }
2169 OpDone (padapter, DID_OK << 16);
2170 break;
2171 case MY_SCSI_ALARMMUTE:
2172 MuteAlarm (padapter);
2173 OpDone (padapter, DID_OK << 16);
2174 break;
2175 case MY_SCSI_DEMOFAIL:
2176 padapter->demoFail = TRUE;
2177 OpDone (padapter, DID_OK << 16);
2178 break;
2179 default:
2180 z = cdb[5]; // get index
2181 pdr = (PDEVICE_RAID1)SCpnt->request_buffer;
2182 if ( padapter->raidData[z] )
2183 {
2184 memcpy (&pdr->DiskRaid1, padapter->raidData[z], sizeof (DISK_MIRROR));
2185 if ( padapter->raidData[z]->reconstructPoint > padapter->raidData[z ^ 2]->reconstructPoint )
2186 pdr->TotalSectors = padapter->raidData[z]->reconstructPoint;
2187 else
2188 pdr->TotalSectors = padapter->raidData[z ^ 2]->reconstructPoint;
2189 }
2190 else
2191 memset (pdr, 0, sizeof (DEVICE_RAID1));
2192 OpDone (padapter, DID_OK << 16);
2193 break;
2194 }
2195 return 0;
2196 }
2197 padapter->cmd = IDE_COMMAND_IDENTIFY;
2198 break;
2199 }
2200
2201 case SCSIOP_TEST_UNIT_READY: // test unit ready CDB
2202 OpDone (padapter, DID_OK << 16);
2203 return 0;
2204 case SCSIOP_READ_CAPACITY: // read capctiy CDB
2205 {
2206 PREAD_CAPACITY_DATA pdata = (PREAD_CAPACITY_DATA)SCpnt->request_buffer;
2207
2208 pdata->blksiz = 0x20000;
2209 XANY2SCSI ((UCHAR *)&pdata->blks, pdev->blocks);
2210 OpDone (padapter, DID_OK << 16);
2211 return 0;
2212 }
2213 case SCSIOP_VERIFY: // verify CDB
2214 padapter->startSector = XSCSI2LONG (&cdb[2]);
2215 padapter->sectorCount = (UCHAR)((USHORT)cdb[8] | ((USHORT)cdb[7] << 8));
2216 padapter->cmd = IDE_COMMAND_VERIFY;
2217 break;
2218 case SCSIOP_READ: // read10 CDB
2219 padapter->startSector = XSCSI2LONG (&cdb[2]);
2220 padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8);
2221 padapter->cmd = READ_CMD;
2222 break;
2223 case SCSIOP_READ6: // read6 CDB
2224 padapter->startSector = SCSI2LONG (&cdb[1]);
2225 padapter->sectorCount = cdb[4];
2226 padapter->cmd = READ_CMD;
2227 break;
2228 case SCSIOP_WRITE: // write10 CDB
2229 padapter->startSector = XSCSI2LONG (&cdb[2]);
2230 padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8);
2231 padapter->cmd = WRITE_CMD;
2232 break;
2233 case SCSIOP_WRITE6: // write6 CDB
2234 padapter->startSector = SCSI2LONG (&cdb[1]);
2235 padapter->sectorCount = cdb[4];
2236 padapter->cmd = WRITE_CMD;
2237 break;
2238 default:
2239 DEB (printk ("pci2220i_queuecommand: Unsupported command %02X\n", *cdb));
2240 OpDone (padapter, DID_ERROR << 16);
2241 return 0;
2242 }
2243
2244 if ( padapter->reconPhase )
2245 return 0;
2246
2247 padapter->pdev = pdev;
2248
2249 while ( padapter->demoFail )
2250 {
2251 pdev = padapter->pdev = &padapter->device[0];
2252 padapter->demoFail = FALSE;
2253 if ( !pdev->raid ||
2254 (pdev->DiskMirror[0].status & UCBF_SURVIVOR) ||
2255 (pdev->DiskMirror[1].status & UCBF_SURVIVOR) )
2256 {
2257 break;
2258 }
2259 if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
2260 padapter->survivor = 1;
2261 else
2262 padapter->survivor = 0;
2263 DEB (printk ("\npci2220i: FAILURE 19"));
2264 if ( InitFailover (padapter, pdev) )
2265 break;
2266 return 0;
2267 }
2268
2269 StartTimer (padapter);
2270 if ( pdev->raid && (padapter->cmd == WRITE_CMD) )
2271 {
2272 rc = IdeCmdBoth (padapter, pdev);
2273 if ( !rc )
2274 rc = WriteDataBoth (padapter, pdev);
2275 if ( rc )
2276 {
2277 del_timer (&padapter->timer);
2278 padapter->expectingIRQ = 0;
2279 padapter->survivor = rc >> 1;
2280 DEB (printk ("\npci2220i: FAILURE 20"));
2281 if ( InitFailover (padapter, pdev) )
2282 {
2283 OpDone (padapter, DID_ERROR << 16);
2284 return 0;
2285 }
2286 }
2287 }
2288 else
2289 {
2290 rc = IdeCmd (padapter, pdev);
2291 if ( (padapter->cmd == WRITE_CMD) && !rc )
2292 rc = WriteData (padapter);
2293 if ( rc )
2294 {
2295 del_timer (&padapter->timer);
2296 padapter->expectingIRQ = 0;
2297 if ( pdev->raid )
2298 {
2299 padapter->survivor = (pdev->spigot ^ 3) >> 1;
2300 DEB (printk ("\npci2220i: FAILURE 21"));
2301 if ( !InitFailover (padapter, pdev) )
2302 return 0;
2303 }
2304 OpDone (padapter, DID_ERROR << 16);
2305 return 0;
2306 }
2307 }
2308 return 0;
2309 }
internal_done(Scsi_Cmnd * SCpnt)2310 static void internal_done(Scsi_Cmnd *SCpnt)
2311 {
2312 SCpnt->SCp.Status++;
2313 }
2314 /****************************************************************
2315 * Name: Pci2220i_Command
2316 *
2317 * Description: Process a command from the SCSI manager.
2318 *
2319 * Parameters: SCpnt - Pointer to SCSI command structure.
2320 *
2321 * Returns: Status code.
2322 *
2323 ****************************************************************/
Pci2220i_Command(Scsi_Cmnd * SCpnt)2324 int Pci2220i_Command (Scsi_Cmnd *SCpnt)
2325 {
2326 Pci2220i_QueueCommand (SCpnt, internal_done);
2327 SCpnt->SCp.Status = 0;
2328 while (!SCpnt->SCp.Status)
2329 barrier ();
2330 return SCpnt->result;
2331 }
2332 /****************************************************************
2333 * Name: ReadFlash
2334 *
2335 * Description: Read information from controller Flash memory.
2336 *
2337 * Parameters: padapter - Pointer to host interface data structure.
2338 * pdata - Pointer to data structures.
2339 * base - base address in Flash.
2340 * length - lenght of data space in bytes.
2341 *
2342 * Returns: Nothing.
2343 *
2344 ****************************************************************/
ReadFlash(PADAPTER2220I padapter,VOID * pdata,ULONG base,ULONG length)2345 static VOID ReadFlash (PADAPTER2220I padapter, VOID *pdata, ULONG base, ULONG length)
2346 {
2347 ULONG oldremap;
2348 UCHAR olddesc;
2349 ULONG z;
2350 UCHAR *pd = (UCHAR *)pdata;
2351
2352 oldremap = inl (padapter->regRemap); // save values to restore later
2353 olddesc = inb_p (padapter->regDesc);
2354
2355 outl (base | 1, padapter->regRemap); // remap to Flash space as specified
2356 outb_p (0x40, padapter->regDesc); // describe remap region as 8 bit
2357 for ( z = 0; z < length; z++) // get "length" data count
2358 *pd++ = inb_p (padapter->regBase + z); // read in the data
2359
2360 outl (oldremap, padapter->regRemap); // restore remap register values
2361 outb_p (olddesc, padapter->regDesc);
2362 }
2363 /****************************************************************
2364 * Name: GetRegs
2365 *
2366 * Description: Initialize the regester information.
2367 *
2368 * Parameters: pshost - Pointer to SCSI host data structure.
2369 * bigd - PCI-2240I identifier
2370 * pcidev - Pointer to device data structure.
2371 *
2372 * Returns: TRUE if failure to install.
2373 *
2374 ****************************************************************/
GetRegs(struct Scsi_Host * pshost,BOOL bigd,struct pci_dev * pcidev)2375 static USHORT GetRegs (struct Scsi_Host *pshost, BOOL bigd, struct pci_dev *pcidev)
2376 {
2377 PADAPTER2220I padapter;
2378 int setirq;
2379 int z;
2380 USHORT zr, zl;
2381 UCHAR *consistent;
2382 dma_addr_t consistentDma;
2383
2384 padapter = HOSTDATA(pshost);
2385 memset (padapter, 0, sizeof (ADAPTER2220I));
2386 memset (&DaleSetup, 0, sizeof (DaleSetup));
2387 memset (DiskMirror, 0, sizeof (DiskMirror));
2388
2389 zr = pci_resource_start (pcidev, 1);
2390 zl = pci_resource_start (pcidev, 2);
2391
2392 padapter->basePort = zr;
2393 padapter->regRemap = zr + RTR_LOCAL_REMAP; // 32 bit local space remap
2394 padapter->regDesc = zr + RTR_REGIONS; // 32 bit local region descriptor
2395 padapter->regRange = zr + RTR_LOCAL_RANGE; // 32 bit local range
2396 padapter->regIrqControl = zr + RTR_INT_CONTROL_STATUS; // 16 bit interupt control and status
2397 padapter->regScratchPad = zr + RTR_MAILBOX; // 16 byte scratchpad I/O base address
2398
2399 padapter->regBase = zl;
2400 padapter->regData = zl + REG_DATA; // data register I/O address
2401 padapter->regError = zl + REG_ERROR; // error register I/O address
2402 padapter->regSectCount = zl + REG_SECTOR_COUNT; // sector count register I/O address
2403 padapter->regLba0 = zl + REG_LBA_0; // least significant byte of LBA
2404 padapter->regLba8 = zl + REG_LBA_8; // next least significant byte of LBA
2405 padapter->regLba16 = zl + REG_LBA_16; // next most significan byte of LBA
2406 padapter->regLba24 = zl + REG_LBA_24; // head and most 4 significant bits of LBA
2407 padapter->regStatCmd = zl + REG_STAT_CMD; // status on read and command on write register
2408 padapter->regStatSel = zl + REG_STAT_SEL; // board status on read and spigot select on write register
2409 padapter->regFail = zl + REG_FAIL;
2410 padapter->regAltStat = zl + REG_ALT_STAT;
2411 padapter->pcidev = pcidev;
2412
2413 if ( bigd )
2414 {
2415 padapter->regDmaDesc = zr + RTR_DMA0_DESC_PTR; // address of the DMA discriptor register for direction of transfer
2416 padapter->regDmaCmdStat = zr + RTR_DMA_COMMAND_STATUS; // Byte #0 of DMA command status register
2417 padapter->regDmaAddrPci = zr + RTR_DMA0_PCI_ADDR; // 32 bit register for PCI address of DMA
2418 padapter->regDmaAddrLoc = zr + RTR_DMA0_LOCAL_ADDR; // 32 bit register for local bus address of DMA
2419 padapter->regDmaCount = zr + RTR_DMA0_COUNT; // 32 bit register for DMA transfer count
2420 padapter->regDmaMode = zr + RTR_DMA0_MODE + 1; // 32 bit register for DMA mode control
2421 padapter->bigD = SEL_NEW_SPEED_1; // set spigot speed control bit
2422 }
2423 else
2424 {
2425 padapter->regDmaDesc = zl + RTL_DMA1_DESC_PTR; // address of the DMA discriptor register for direction of transfer
2426 padapter->regDmaCmdStat = zl + RTL_DMA_COMMAND_STATUS + 1; // Byte #1 of DMA command status register
2427 padapter->regDmaAddrPci = zl + RTL_DMA1_PCI_ADDR; // 32 bit register for PCI address of DMA
2428 padapter->regDmaAddrLoc = zl + RTL_DMA1_LOCAL_ADDR; // 32 bit register for local bus address of DMA
2429 padapter->regDmaCount = zl + RTL_DMA1_COUNT; // 32 bit register for DMA transfer count
2430 padapter->regDmaMode = zl + RTL_DMA1_MODE + 1; // 32 bit register for DMA mode control
2431 }
2432
2433 padapter->numberOfDrives = inb_p (padapter->regScratchPad + BIGD_NUM_DRIVES);
2434 if ( !bigd && !padapter->numberOfDrives ) // if no devices on this board
2435 return TRUE;
2436
2437 pshost->irq = pcidev->irq;
2438 setirq = 1;
2439 for ( z = 0; z < Installed; z++ ) // scan for shared interrupts
2440 {
2441 if ( PsiHost[z]->irq == pshost->irq ) // if shared then, don't posses
2442 setirq = 0;
2443 }
2444 if ( setirq ) // if not shared, posses
2445 {
2446 if ( request_irq (pshost->irq, Irq_Handler, SA_SHIRQ, "pci2220i", padapter) < 0 )
2447 {
2448 if ( request_irq (pshost->irq, Irq_Handler, SA_INTERRUPT | SA_SHIRQ, "pci2220i", padapter) < 0 )
2449 {
2450 printk ("Unable to allocate IRQ for PCI-2220I controller.\n");
2451 return TRUE;
2452 }
2453 }
2454 padapter->irqOwned = pshost->irq; // set IRQ as owned
2455 }
2456
2457 if ( padapter->numberOfDrives )
2458 consistent = pci_alloc_consistent (pcidev, SECTORSXFER * BYTES_PER_SECTOR, &consistentDma);
2459 else
2460 consistent = pci_alloc_consistent (pcidev, ATAPI_TRANSFER, &consistentDma);
2461 if ( !consistent )
2462 {
2463 printk ("Unable to allocate DMA buffer for PCI-2220I controller.\n");
2464 free_irq (pshost->irq, padapter);
2465 return TRUE;
2466 }
2467 padapter->kBuffer = consistent;
2468 padapter->kBufferDma = consistentDma;
2469
2470 PsiHost[Installed] = pshost; // save SCSI_HOST pointer
2471 pshost->io_port = padapter->basePort;
2472 pshost->n_io_port = 0xFF;
2473 pshost->unique_id = padapter->regBase;
2474
2475 outb_p (0x01, padapter->regRange); // fix our range register because other drivers want to tromp on it
2476
2477 padapter->timingMode = inb_p (padapter->regScratchPad + DALE_TIMING_MODE);
2478 if ( padapter->timingMode >= 2 )
2479 {
2480 if ( bigd )
2481 padapter->timingAddress = ModeArray2[padapter->timingMode - 2];
2482 else
2483 padapter->timingAddress = ModeArray[padapter->timingMode - 2];
2484 }
2485 else
2486 padapter->timingPIO = TRUE;
2487
2488 ReadFlash (padapter, &DaleSetup, DALE_FLASH_SETUP, sizeof (SETUP));
2489 ReadFlash (padapter, &DiskMirror, DALE_FLASH_RAID, sizeof (DiskMirror));
2490
2491 return FALSE;
2492 }
2493 /****************************************************************
2494 * Name: SetupFinish
2495 *
2496 * Description: Complete the driver initialization process for a card
2497 *
2498 * Parameters: padapter - Pointer to SCSI host data structure.
2499 * str - Pointer to board type string.
2500 *
2501 * Returns: Nothing.
2502 *
2503 ****************************************************************/
SetupFinish(PADAPTER2220I padapter,char * str,int irq)2504 VOID SetupFinish (PADAPTER2220I padapter, char *str, int irq)
2505 {
2506 init_timer (&padapter->timer);
2507 padapter->timer.function = TimerExpiry;
2508 padapter->timer.data = (unsigned long)padapter;
2509 init_timer (&padapter->reconTimer);
2510 padapter->reconTimer.function = ReconTimerExpiry;
2511 padapter->reconTimer.data = (unsigned long)padapter;
2512 printk("\nPCI-%sI EIDE CONTROLLER: at I/O = %lX/%lX IRQ = %d\n", str, padapter->basePort, padapter->regBase, irq);
2513 printk("Version %s, Compiled %s %s\n\n", PCI2220I_VERSION, __DATE__, __TIME__);
2514 }
2515 /****************************************************************
2516 * Name: Pci2220i_Detect
2517 *
2518 * Description: Detect and initialize our boards.
2519 *
2520 * Parameters: tpnt - Pointer to SCSI host template structure.
2521 *
2522 * Returns: Number of adapters installed.
2523 *
2524 ****************************************************************/
Pci2220i_Detect(Scsi_Host_Template * tpnt)2525 int Pci2220i_Detect (Scsi_Host_Template *tpnt)
2526 {
2527 struct Scsi_Host *pshost;
2528 PADAPTER2220I padapter;
2529 POUR_DEVICE pdev;
2530 int unit;
2531 int z;
2532 USHORT raidon;
2533 UCHAR spigot1, spigot2;
2534 UCHAR device;
2535 struct pci_dev *pcidev = NULL;
2536
2537 if ( !pci_present () )
2538 {
2539 printk ("pci2220i: PCI BIOS not present\n");
2540 return 0;
2541 }
2542
2543 while ( (pcidev = pci_find_device (VENDOR_PSI, DEVICE_DALE_1, pcidev)) != NULL )
2544 {
2545 if (pci_enable_device(pcidev))
2546 continue;
2547 pshost = scsi_register (tpnt, sizeof(ADAPTER2220I));
2548 if(pshost==NULL)
2549 continue;
2550
2551 padapter = HOSTDATA(pshost);
2552
2553 if ( GetRegs (pshost, FALSE, pcidev) )
2554 goto unregister;
2555
2556 scsi_set_pci_device(pshost, pcidev);
2557 pshost->max_id = padapter->numberOfDrives;
2558 for ( z = 0; z < padapter->numberOfDrives; z++ )
2559 {
2560 unit = inb_p (padapter->regScratchPad + DALE_CHANNEL_DEVICE_0 + z) & 0x0F;
2561 pdev = &padapter->device[z];
2562 pdev->byte6 = (UCHAR)(((unit & 1) << 4) | 0xE0);
2563 pdev->spigot = (UCHAR)(1 << (unit >> 1));
2564 pdev->sectors = DaleSetup.setupDevice[unit].sectors;
2565 pdev->heads = DaleSetup.setupDevice[unit].heads;
2566 pdev->cylinders = DaleSetup.setupDevice[unit].cylinders;
2567 pdev->blocks = DaleSetup.setupDevice[unit].blocks;
2568
2569 if ( !z )
2570 {
2571 DiskMirror[0].status = inb_p (padapter->regScratchPad + DALE_RAID_0_STATUS);
2572 DiskMirror[1].status = inb_p (padapter->regScratchPad + DALE_RAID_1_STATUS);
2573 if ( (DiskMirror[0].signature == SIGNATURE) && (DiskMirror[1].signature == SIGNATURE) &&
2574 (DiskMirror[0].pairIdentifier == (DiskMirror[1].pairIdentifier ^ 1)) )
2575 {
2576 raidon = TRUE;
2577 if ( unit > (unit ^ 2) )
2578 unit = unit ^ 2;
2579 }
2580 else
2581 raidon = FALSE;
2582
2583 memcpy (pdev->DiskMirror, DiskMirror, sizeof (DiskMirror));
2584 padapter->raidData[0] = &pdev->DiskMirror[0];
2585 padapter->raidData[2] = &pdev->DiskMirror[1];
2586
2587 spigot1 = spigot2 = FALSE;
2588 pdev->spigots[0] = 1;
2589 pdev->spigots[1] = 2;
2590 pdev->lastsectorlba[0] = InlineIdentify (padapter, 1, 0);
2591 pdev->lastsectorlba[1] = InlineIdentify (padapter, 2, 0);
2592
2593 if ( !(pdev->DiskMirror[1].status & UCBF_SURVIVOR) && pdev->lastsectorlba[0] )
2594 spigot1 = TRUE;
2595 if ( !(pdev->DiskMirror[0].status & UCBF_SURVIVOR) && pdev->lastsectorlba[1] )
2596 spigot2 = TRUE;
2597 if ( pdev->DiskMirror[0].status & DiskMirror[1].status & UCBF_SURVIVOR )
2598 spigot1 = TRUE;
2599
2600 if ( spigot1 && (pdev->DiskMirror[0].status & UCBF_REBUILD) )
2601 InlineReadSignature (padapter, pdev, 0);
2602 if ( spigot2 && (pdev->DiskMirror[1].status & UCBF_REBUILD) )
2603 InlineReadSignature (padapter, pdev, 1);
2604
2605 if ( spigot1 && spigot2 && raidon )
2606 {
2607 pdev->raid = 1;
2608 if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
2609 pdev->spigot = 2;
2610 else
2611 pdev->spigot = 1;
2612 if ( (pdev->DiskMirror[0].status & UCBF_REBUILD) || (pdev->DiskMirror[1].status & UCBF_REBUILD) )
2613 padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE;
2614 }
2615 else
2616 {
2617 if ( spigot1 )
2618 {
2619 if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
2620 goto unregister;
2621 pdev->DiskMirror[0].status = UCBF_MIRRORED | UCBF_SURVIVOR;
2622 pdev->spigot = 1;
2623 }
2624 else
2625 {
2626 if ( pdev->DiskMirror[1].status & UCBF_REBUILD )
2627 goto unregister;
2628 pdev->DiskMirror[1].status = UCBF_MIRRORED | UCBF_SURVIVOR;
2629 pdev->spigot = 2;
2630 }
2631 if ( DaleSetup.rebootRebuild && raidon )
2632 padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE;
2633 }
2634
2635 if ( raidon )
2636 break;
2637 }
2638 }
2639
2640 SetupFinish (padapter, "2220", pshost->irq);
2641
2642 if ( ++Installed < MAXADAPTER )
2643 continue;
2644 break;;
2645 unregister:;
2646 scsi_unregister (pshost);
2647 }
2648
2649 while ( (pcidev = pci_find_device (VENDOR_PSI, DEVICE_BIGD_1, pcidev)) != NULL )
2650 {
2651 pshost = scsi_register (tpnt, sizeof(ADAPTER2220I));
2652 padapter = HOSTDATA(pshost);
2653
2654 if ( GetRegs (pshost, TRUE, pcidev) )
2655 goto unregister1;
2656
2657 for ( z = 0; z < BIGD_MAXDRIVES; z++ )
2658 DiskMirror[z].status = inb_p (padapter->regScratchPad + BIGD_RAID_0_STATUS + z);
2659
2660 scsi_set_pci_device(pshost, pcidev);
2661 pshost->max_id = padapter->numberOfDrives;
2662 padapter->failRegister = inb_p (padapter->regScratchPad + BIGD_ALARM_IMAGE);
2663 for ( z = 0; z < padapter->numberOfDrives; z++ )
2664 {
2665 unit = inb_p (padapter->regScratchPad + BIGD_DEVICE_0 + z);
2666 pdev = &padapter->device[z];
2667 pdev->byte6 = (UCHAR)(((unit & 1) << 4) | 0xE0);
2668 pdev->spigot = (UCHAR)(1 << (unit >> 1));
2669 pdev->sectors = DaleSetup.setupDevice[unit].sectors;
2670 pdev->heads = DaleSetup.setupDevice[unit].heads;
2671 pdev->cylinders = DaleSetup.setupDevice[unit].cylinders;
2672 pdev->blocks = DaleSetup.setupDevice[unit].blocks;
2673
2674 if ( (DiskMirror[unit].signature == SIGNATURE) && (DiskMirror[unit ^ 2].signature == SIGNATURE) &&
2675 (DiskMirror[unit].pairIdentifier == (DiskMirror[unit ^ 2].pairIdentifier ^ 1)) )
2676 {
2677 raidon = TRUE;
2678 if ( unit > (unit ^ 2) )
2679 unit = unit ^ 2;
2680 }
2681 else
2682 raidon = FALSE;
2683
2684 spigot1 = spigot2 = FALSE;
2685 memcpy (&pdev->DiskMirror[0], &DiskMirror[unit], sizeof (DISK_MIRROR));
2686 memcpy (&pdev->DiskMirror[1], &DiskMirror[unit ^ 2], sizeof (DISK_MIRROR));
2687 padapter->raidData[unit] = &pdev->DiskMirror[0];
2688 padapter->raidData[unit ^ 2] = &pdev->DiskMirror[1];
2689 pdev->spigots[0] = 1 << (unit >> 1);
2690 pdev->spigots[1] = 1 << ((unit ^ 2) >> 1);
2691 pdev->deviceID[0] = unit;
2692 pdev->deviceID[1] = unit ^ 2;
2693 pdev->lastsectorlba[0] = InlineIdentify (padapter, pdev->spigots[0], unit & 1);
2694 pdev->lastsectorlba[1] = InlineIdentify (padapter, pdev->spigots[1], unit & 1);
2695
2696 if ( !(pdev->DiskMirror[1].status & UCBF_SURVIVOR) && pdev->lastsectorlba[0] )
2697 spigot1 = TRUE;
2698 if ( !(pdev->DiskMirror[0].status & UCBF_SURVIVOR) && pdev->lastsectorlba[1] )
2699 spigot2 = TRUE;
2700 if ( pdev->DiskMirror[0].status & pdev->DiskMirror[1].status & UCBF_SURVIVOR )
2701 spigot1 = TRUE;
2702
2703 if ( spigot1 && (pdev->DiskMirror[0].status & UCBF_REBUILD) )
2704 InlineReadSignature (padapter, pdev, 0);
2705 if ( spigot2 && (pdev->DiskMirror[1].status & UCBF_REBUILD) )
2706 InlineReadSignature (padapter, pdev, 1);
2707
2708 if ( spigot1 && spigot2 && raidon )
2709 {
2710 pdev->raid = 1;
2711 if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
2712 pdev->spigot = pdev->spigots[1];
2713 else
2714 pdev->spigot = pdev->spigots[0];
2715 if ( (pdev->DiskMirror[0].status & UCBF_REBUILD) || (pdev->DiskMirror[1].status & UCBF_REBUILD) )
2716 padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE;
2717 }
2718 else
2719 {
2720 if ( spigot1 )
2721 {
2722 if ( pdev->DiskMirror[0].status & UCBF_REBUILD )
2723 goto unregister1;
2724 pdev->DiskMirror[0].status = UCBF_MIRRORED | UCBF_SURVIVOR;
2725 pdev->spigot = pdev->spigots[0];
2726 }
2727 else
2728 {
2729 if ( pdev->DiskMirror[1].status & UCBF_REBUILD )
2730 goto unregister;
2731 pdev->DiskMirror[1].status = UCBF_MIRRORED | UCBF_SURVIVOR;
2732 pdev->spigot = pdev->spigots[1];
2733 }
2734 if ( DaleSetup.rebootRebuild && raidon )
2735 padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE;
2736 }
2737 }
2738
2739 if ( !padapter->numberOfDrives ) // If no ATA devices then scan ATAPI
2740 {
2741 unit = 0;
2742 for ( spigot1 = 0; spigot1 < 4; spigot1++ )
2743 {
2744 for ( device = 0; device < 2; device++ )
2745 {
2746 DEB (printk ("\nPCI2242I: scanning for ID %d ", (spigot1 * 2) + device));
2747 pdev = &(padapter->device[(spigot1 * 2) + device]);
2748 pdev->byte6 = 0x0A | (device << 4);
2749 pdev->spigot = 1 << spigot1;
2750 if ( !AtapiReset (padapter, pdev) )
2751 {
2752 DEB (printk (" Device found "));
2753 if ( !AtapiIdentify (padapter, pdev) )
2754 {
2755 DEB (printk (" Device verified"));
2756 unit++;
2757 continue;
2758 }
2759 }
2760 pdev->spigot = pdev->byte6 = 0;
2761 }
2762 }
2763
2764 if ( unit )
2765 {
2766 padapter->atapi = TRUE;
2767 padapter->timingAddress = DALE_DATA_MODE3;
2768 outw_p (0x0900, padapter->regIrqControl); // Turn our interrupts on
2769 outw_p (0x0C41, padapter->regDmaMode - 1); // setup for 16 bits, ready enabled, done IRQ enabled, no incriment
2770 outb_p (0xFF, padapter->regFail); // all fail lights and alarm off
2771 pshost->max_id = 8;
2772 }
2773 }
2774 SetupFinish (padapter, "2240", pshost->irq);
2775
2776 if ( ++Installed < MAXADAPTER )
2777 continue;
2778 break;;
2779 unregister1:;
2780 scsi_unregister (pshost);
2781 }
2782
2783 NumAdapters = Installed;
2784 return Installed;
2785 }
2786 /****************************************************************
2787 * Name: Pci2220i_Abort
2788 *
2789 * Description: Process the Abort command from the SCSI manager.
2790 *
2791 * Parameters: SCpnt - Pointer to SCSI command structure.
2792 *
2793 * Returns: Allways snooze.
2794 *
2795 ****************************************************************/
Pci2220i_Abort(Scsi_Cmnd * SCpnt)2796 int Pci2220i_Abort (Scsi_Cmnd *SCpnt)
2797 {
2798 PADAPTER2220I padapter = HOSTDATA(SCpnt->host); // Pointer to adapter control structure
2799 POUR_DEVICE pdev = &padapter->device[SCpnt->target];// Pointer to device information
2800
2801 if ( !padapter->SCpnt )
2802 return SCSI_ABORT_NOT_RUNNING;
2803
2804 if ( padapter->atapi )
2805 {
2806 if ( AtapiReset (padapter, pdev) )
2807 return SCSI_ABORT_ERROR;
2808 OpDone (padapter, DID_ABORT << 16);
2809 return SCSI_ABORT_SUCCESS;
2810 }
2811 return SCSI_ABORT_SNOOZE;
2812 }
2813 /****************************************************************
2814 * Name: Pci2220i_Reset
2815 *
2816 * Description: Process the Reset command from the SCSI manager.
2817 *
2818 * Parameters: SCpnt - Pointer to SCSI command structure.
2819 * flags - Flags about the reset command
2820 *
2821 * Returns: No active command at this time, so this means
2822 * that each time we got some kind of response the
2823 * last time through. Tell the mid-level code to
2824 * request sense information in order to decide what
2825 * to do next.
2826 *
2827 ****************************************************************/
Pci2220i_Reset(Scsi_Cmnd * SCpnt,unsigned int reset_flags)2828 int Pci2220i_Reset (Scsi_Cmnd *SCpnt, unsigned int reset_flags)
2829 {
2830 PADAPTER2220I padapter = HOSTDATA(SCpnt->host); // Pointer to adapter control structure
2831 POUR_DEVICE pdev = &padapter->device[SCpnt->target];// Pointer to device information
2832
2833 if ( padapter->atapi )
2834 {
2835 if ( AtapiReset (padapter, pdev) )
2836 return SCSI_RESET_ERROR;
2837 return SCSI_RESET_SUCCESS;
2838 }
2839 return SCSI_RESET_PUNT;
2840 }
2841 /****************************************************************
2842 * Name: Pci2220i_Release
2843 *
2844 * Description: Release resources allocated for a single each adapter.
2845 *
2846 * Parameters: pshost - Pointer to SCSI command structure.
2847 *
2848 * Returns: zero.
2849 *
2850 ****************************************************************/
Pci2220i_Release(struct Scsi_Host * pshost)2851 int Pci2220i_Release (struct Scsi_Host *pshost)
2852 {
2853 PADAPTER2220I padapter = HOSTDATA (pshost);
2854 USHORT z;
2855
2856 if ( padapter->reconOn )
2857 {
2858 padapter->reconOn = FALSE; // shut down the hot reconstruct
2859 if ( padapter->reconPhase )
2860 mdelay (300);
2861 if ( padapter->reconTimer.data ) // is the timer running?
2862 {
2863 del_timer (&padapter->reconTimer);
2864 padapter->reconTimer.data = 0;
2865 }
2866 }
2867
2868 // save RAID status on the board
2869 if ( padapter->bigD )
2870 {
2871 outb_p (padapter->failRegister, padapter->regScratchPad + BIGD_ALARM_IMAGE);
2872 for ( z = 0; z < BIGD_MAXDRIVES; z++ )
2873 {
2874 if ( padapter->raidData )
2875 outb_p (padapter->raidData[z]->status, padapter->regScratchPad + BIGD_RAID_0_STATUS + z);
2876 else
2877 outb_p (0, padapter->regScratchPad + BIGD_RAID_0_STATUS);
2878 }
2879 }
2880 else
2881 {
2882 outb_p (padapter->device[0].DiskMirror[0].status, padapter->regScratchPad + DALE_RAID_0_STATUS);
2883 outb_p (padapter->device[0].DiskMirror[1].status, padapter->regScratchPad + DALE_RAID_1_STATUS);
2884 }
2885
2886 if ( padapter->irqOwned )
2887 free_irq (pshost->irq, padapter);
2888 release_region (pshost->io_port, pshost->n_io_port);
2889 if ( padapter->numberOfDrives )
2890 pci_free_consistent (padapter->pcidev, SECTORSXFER * BYTES_PER_SECTOR, padapter->kBuffer, padapter->kBufferDma);
2891 else
2892 pci_free_consistent (padapter->pcidev, ATAPI_TRANSFER, padapter->kBuffer, padapter->kBufferDma);
2893 scsi_unregister(pshost);
2894 return 0;
2895 }
2896
2897 #include "sd.h"
2898
2899 /****************************************************************
2900 * Name: Pci2220i_BiosParam
2901 *
2902 * Description: Process the biosparam request from the SCSI manager to
2903 * return C/H/S data.
2904 *
2905 * Parameters: disk - Pointer to SCSI disk structure.
2906 * dev - Major/minor number from kernel.
2907 * geom - Pointer to integer array to place geometry data.
2908 *
2909 * Returns: zero.
2910 *
2911 ****************************************************************/
Pci2220i_BiosParam(Scsi_Disk * disk,kdev_t dev,int geom[])2912 int Pci2220i_BiosParam (Scsi_Disk *disk, kdev_t dev, int geom[])
2913 {
2914 POUR_DEVICE pdev;
2915
2916 if ( !(HOSTDATA(disk->device->host))->atapi )
2917 {
2918 pdev = &(HOSTDATA(disk->device->host)->device[disk->device->id]);
2919
2920 geom[0] = pdev->heads;
2921 geom[1] = pdev->sectors;
2922 geom[2] = pdev->cylinders;
2923 }
2924 return 0;
2925 }
2926
2927 MODULE_LICENSE("Dual BSD/GPL");
2928
2929 /* Eventually this will go into an include file, but this will be later */
2930 static Scsi_Host_Template driver_template = PCI2220I;
2931
2932 #include "scsi_module.c"
2933