1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * I2C driver for Marvell 88PM80x
4 *
5 * Copyright (C) 2012 Marvell International Ltd.
6 * Haojian Zhuang <haojian.zhuang@marvell.com>
7 * Joseph(Yossi) Hanin <yhanin@marvell.com>
8 * Qiao Zhou <zhouqiao@marvell.com>
9 */
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/i2c.h>
13 #include <linux/mfd/88pm80x.h>
14 #include <linux/slab.h>
15 #include <linux/uaccess.h>
16 #include <linux/err.h>
17
18 /* 88pm80x chips have same definition for chip id register. */
19 #define PM80X_CHIP_ID (0x00)
20 #define PM80X_CHIP_ID_NUM(x) (((x) >> 5) & 0x7)
21 #define PM80X_CHIP_ID_REVISION(x) ((x) & 0x1F)
22
23 struct pm80x_chip_mapping {
24 unsigned int id;
25 int type;
26 };
27
28 static struct pm80x_chip_mapping chip_mapping[] = {
29 /* 88PM800 chip id number */
30 {0x3, CHIP_PM800},
31 /* 88PM805 chip id number */
32 {0x0, CHIP_PM805},
33 /* 88PM860 chip id number */
34 {0x4, CHIP_PM860},
35 };
36
37 /*
38 * workaround: some registers needed by pm805 are defined in pm800, so
39 * need to use this global variable to maintain the relation between
40 * pm800 and pm805. would remove it after HW chip fixes the issue.
41 */
42 static struct pm80x_chip *g_pm80x_chip;
43
44 const struct regmap_config pm80x_regmap_config = {
45 .reg_bits = 8,
46 .val_bits = 8,
47 };
48 EXPORT_SYMBOL_GPL(pm80x_regmap_config);
49
50
pm80x_init(struct i2c_client * client)51 int pm80x_init(struct i2c_client *client)
52 {
53 struct pm80x_chip *chip;
54 struct regmap *map;
55 unsigned int val;
56 int i, ret = 0;
57
58 chip =
59 devm_kzalloc(&client->dev, sizeof(struct pm80x_chip), GFP_KERNEL);
60 if (!chip)
61 return -ENOMEM;
62
63 map = devm_regmap_init_i2c(client, &pm80x_regmap_config);
64 if (IS_ERR(map)) {
65 ret = PTR_ERR(map);
66 dev_err(&client->dev, "Failed to allocate register map: %d\n",
67 ret);
68 return ret;
69 }
70
71 chip->client = client;
72 chip->regmap = map;
73
74 chip->irq = client->irq;
75
76 chip->dev = &client->dev;
77 dev_set_drvdata(chip->dev, chip);
78 i2c_set_clientdata(chip->client, chip);
79
80 ret = regmap_read(chip->regmap, PM80X_CHIP_ID, &val);
81 if (ret < 0) {
82 dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
83 return ret;
84 }
85
86 for (i = 0; i < ARRAY_SIZE(chip_mapping); i++) {
87 if (chip_mapping[i].id == PM80X_CHIP_ID_NUM(val)) {
88 chip->type = chip_mapping[i].type;
89 break;
90 }
91 }
92
93 if (i == ARRAY_SIZE(chip_mapping)) {
94 dev_err(chip->dev,
95 "Failed to detect Marvell 88PM800:ChipID[0x%x]\n", val);
96 return -EINVAL;
97 }
98
99 device_init_wakeup(&client->dev, 1);
100
101 /*
102 * workaround: set g_pm80x_chip to the first probed chip. if the
103 * second chip is probed, just point to the companion to each
104 * other so that pm805 can access those specific register. would
105 * remove it after HW chip fixes the issue.
106 */
107 if (!g_pm80x_chip)
108 g_pm80x_chip = chip;
109 else {
110 chip->companion = g_pm80x_chip->client;
111 g_pm80x_chip->companion = chip->client;
112 }
113
114 return 0;
115 }
116 EXPORT_SYMBOL_GPL(pm80x_init);
117
pm80x_deinit(void)118 int pm80x_deinit(void)
119 {
120 /*
121 * workaround: clear the dependency between pm800 and pm805.
122 * would remove it after HW chip fixes the issue.
123 */
124 if (g_pm80x_chip->companion)
125 g_pm80x_chip->companion = NULL;
126 else
127 g_pm80x_chip = NULL;
128 return 0;
129 }
130 EXPORT_SYMBOL_GPL(pm80x_deinit);
131
132 #ifdef CONFIG_PM_SLEEP
pm80x_suspend(struct device * dev)133 static int pm80x_suspend(struct device *dev)
134 {
135 struct i2c_client *client = to_i2c_client(dev);
136 struct pm80x_chip *chip = i2c_get_clientdata(client);
137
138 if (chip && chip->wu_flag)
139 if (device_may_wakeup(chip->dev))
140 enable_irq_wake(chip->irq);
141
142 return 0;
143 }
144
pm80x_resume(struct device * dev)145 static int pm80x_resume(struct device *dev)
146 {
147 struct i2c_client *client = to_i2c_client(dev);
148 struct pm80x_chip *chip = i2c_get_clientdata(client);
149
150 if (chip && chip->wu_flag)
151 if (device_may_wakeup(chip->dev))
152 disable_irq_wake(chip->irq);
153
154 return 0;
155 }
156 #endif
157
158 SIMPLE_DEV_PM_OPS(pm80x_pm_ops, pm80x_suspend, pm80x_resume);
159 EXPORT_SYMBOL_GPL(pm80x_pm_ops);
160
161 MODULE_DESCRIPTION("I2C Driver for Marvell 88PM80x");
162 MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
163 MODULE_LICENSE("GPL");
164