1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Low-Level PCI Support for PC
4 *
5 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
6 */
7
8 #include <linux/sched.h>
9 #include <linux/pci.h>
10 #include <linux/pci-acpi.h>
11 #include <linux/ioport.h>
12 #include <linux/init.h>
13 #include <linux/dmi.h>
14 #include <linux/slab.h>
15
16 #include <asm/acpi.h>
17 #include <asm/segment.h>
18 #include <asm/io.h>
19 #include <asm/smp.h>
20 #include <asm/pci_x86.h>
21 #include <asm/setup.h>
22 #include <asm/irqdomain.h>
23
24 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
25 PCI_PROBE_MMCONF;
26
27 static int pci_bf_sort;
28 int pci_routeirq;
29 int noioapicquirk;
30 #ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
31 int noioapicreroute = 0;
32 #else
33 int noioapicreroute = 1;
34 #endif
35 int pcibios_last_bus = -1;
36 unsigned long pirq_table_addr;
37 const struct pci_raw_ops *__read_mostly raw_pci_ops;
38 const struct pci_raw_ops *__read_mostly raw_pci_ext_ops;
39
raw_pci_read(unsigned int domain,unsigned int bus,unsigned int devfn,int reg,int len,u32 * val)40 int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
41 int reg, int len, u32 *val)
42 {
43 if (domain == 0 && reg < 256 && raw_pci_ops)
44 return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
45 if (raw_pci_ext_ops)
46 return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
47 return -EINVAL;
48 }
49
raw_pci_write(unsigned int domain,unsigned int bus,unsigned int devfn,int reg,int len,u32 val)50 int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
51 int reg, int len, u32 val)
52 {
53 if (domain == 0 && reg < 256 && raw_pci_ops)
54 return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
55 if (raw_pci_ext_ops)
56 return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
57 return -EINVAL;
58 }
59
pci_read(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 * value)60 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
61 {
62 return raw_pci_read(pci_domain_nr(bus), bus->number,
63 devfn, where, size, value);
64 }
65
pci_write(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 value)66 static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
67 {
68 return raw_pci_write(pci_domain_nr(bus), bus->number,
69 devfn, where, size, value);
70 }
71
72 struct pci_ops pci_root_ops = {
73 .read = pci_read,
74 .write = pci_write,
75 };
76
77 /*
78 * This interrupt-safe spinlock protects all accesses to PCI configuration
79 * space, except for the mmconfig (ECAM) based operations.
80 */
81 DEFINE_RAW_SPINLOCK(pci_config_lock);
82
can_skip_ioresource_align(const struct dmi_system_id * d)83 static int __init can_skip_ioresource_align(const struct dmi_system_id *d)
84 {
85 pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
86 printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
87 return 0;
88 }
89
90 static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __initconst = {
91 /*
92 * Systems where PCI IO resource ISA alignment can be skipped
93 * when the ISA enable bit in the bridge control is not set
94 */
95 {
96 .callback = can_skip_ioresource_align,
97 .ident = "IBM System x3800",
98 .matches = {
99 DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
100 DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
101 },
102 },
103 {
104 .callback = can_skip_ioresource_align,
105 .ident = "IBM System x3850",
106 .matches = {
107 DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
108 DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
109 },
110 },
111 {
112 .callback = can_skip_ioresource_align,
113 .ident = "IBM System x3950",
114 .matches = {
115 DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
116 DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
117 },
118 },
119 {}
120 };
121
dmi_check_skip_isa_align(void)122 void __init dmi_check_skip_isa_align(void)
123 {
124 dmi_check_system(can_skip_pciprobe_dmi_table);
125 }
126
pcibios_fixup_device_resources(struct pci_dev * dev)127 static void pcibios_fixup_device_resources(struct pci_dev *dev)
128 {
129 struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
130 struct resource *bar_r;
131 int bar;
132
133 if (pci_probe & PCI_NOASSIGN_BARS) {
134 /*
135 * If the BIOS did not assign the BAR, zero out the
136 * resource so the kernel doesn't attempt to assign
137 * it later on in pci_assign_unassigned_resources
138 */
139 for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
140 bar_r = &dev->resource[bar];
141 if (bar_r->start == 0 && bar_r->end != 0) {
142 bar_r->flags = 0;
143 bar_r->end = 0;
144 }
145 }
146 }
147
148 if (pci_probe & PCI_NOASSIGN_ROMS) {
149 if (rom_r->parent)
150 return;
151 if (rom_r->start) {
152 /* we deal with BIOS assigned ROM later */
153 return;
154 }
155 rom_r->start = rom_r->end = rom_r->flags = 0;
156 }
157 }
158
159 /*
160 * Called after each bus is probed, but before its children
161 * are examined.
162 */
163
pcibios_fixup_bus(struct pci_bus * b)164 void pcibios_fixup_bus(struct pci_bus *b)
165 {
166 struct pci_dev *dev;
167
168 pci_read_bridge_bases(b);
169 list_for_each_entry(dev, &b->devices, bus_list)
170 pcibios_fixup_device_resources(dev);
171 }
172
pcibios_add_bus(struct pci_bus * bus)173 void pcibios_add_bus(struct pci_bus *bus)
174 {
175 acpi_pci_add_bus(bus);
176 }
177
pcibios_remove_bus(struct pci_bus * bus)178 void pcibios_remove_bus(struct pci_bus *bus)
179 {
180 acpi_pci_remove_bus(bus);
181 }
182
183 /*
184 * Only use DMI information to set this if nothing was passed
185 * on the kernel command line (which was parsed earlier).
186 */
187
set_bf_sort(const struct dmi_system_id * d)188 static int __init set_bf_sort(const struct dmi_system_id *d)
189 {
190 if (pci_bf_sort == pci_bf_sort_default) {
191 pci_bf_sort = pci_dmi_bf;
192 printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
193 }
194 return 0;
195 }
196
read_dmi_type_b1(const struct dmi_header * dm,void * private_data)197 static void __init read_dmi_type_b1(const struct dmi_header *dm,
198 void *private_data)
199 {
200 u8 *data = (u8 *)dm + 4;
201
202 if (dm->type != 0xB1)
203 return;
204 if ((((*(u32 *)data) >> 9) & 0x03) == 0x01)
205 set_bf_sort((const struct dmi_system_id *)private_data);
206 }
207
find_sort_method(const struct dmi_system_id * d)208 static int __init find_sort_method(const struct dmi_system_id *d)
209 {
210 dmi_walk(read_dmi_type_b1, (void *)d);
211 return 0;
212 }
213
214 /*
215 * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
216 */
217 #ifdef __i386__
assign_all_busses(const struct dmi_system_id * d)218 static int __init assign_all_busses(const struct dmi_system_id *d)
219 {
220 pci_probe |= PCI_ASSIGN_ALL_BUSSES;
221 printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
222 " (pci=assign-busses)\n", d->ident);
223 return 0;
224 }
225 #endif
226
set_scan_all(const struct dmi_system_id * d)227 static int __init set_scan_all(const struct dmi_system_id *d)
228 {
229 printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n",
230 d->ident);
231 pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
232 return 0;
233 }
234
235 static const struct dmi_system_id pciprobe_dmi_table[] __initconst = {
236 #ifdef __i386__
237 /*
238 * Laptops which need pci=assign-busses to see Cardbus cards
239 */
240 {
241 .callback = assign_all_busses,
242 .ident = "Samsung X20 Laptop",
243 .matches = {
244 DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
245 DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
246 },
247 },
248 #endif /* __i386__ */
249 {
250 .callback = set_bf_sort,
251 .ident = "Dell PowerEdge 1950",
252 .matches = {
253 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
254 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
255 },
256 },
257 {
258 .callback = set_bf_sort,
259 .ident = "Dell PowerEdge 1955",
260 .matches = {
261 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
262 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
263 },
264 },
265 {
266 .callback = set_bf_sort,
267 .ident = "Dell PowerEdge 2900",
268 .matches = {
269 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
270 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
271 },
272 },
273 {
274 .callback = set_bf_sort,
275 .ident = "Dell PowerEdge 2950",
276 .matches = {
277 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
278 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
279 },
280 },
281 {
282 .callback = set_bf_sort,
283 .ident = "Dell PowerEdge R900",
284 .matches = {
285 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
286 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
287 },
288 },
289 {
290 .callback = find_sort_method,
291 .ident = "Dell System",
292 .matches = {
293 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
294 },
295 },
296 {
297 .callback = set_bf_sort,
298 .ident = "HP ProLiant BL20p G3",
299 .matches = {
300 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
301 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
302 },
303 },
304 {
305 .callback = set_bf_sort,
306 .ident = "HP ProLiant BL20p G4",
307 .matches = {
308 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
309 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
310 },
311 },
312 {
313 .callback = set_bf_sort,
314 .ident = "HP ProLiant BL30p G1",
315 .matches = {
316 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
317 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
318 },
319 },
320 {
321 .callback = set_bf_sort,
322 .ident = "HP ProLiant BL25p G1",
323 .matches = {
324 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
325 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
326 },
327 },
328 {
329 .callback = set_bf_sort,
330 .ident = "HP ProLiant BL35p G1",
331 .matches = {
332 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
333 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
334 },
335 },
336 {
337 .callback = set_bf_sort,
338 .ident = "HP ProLiant BL45p G1",
339 .matches = {
340 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
341 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
342 },
343 },
344 {
345 .callback = set_bf_sort,
346 .ident = "HP ProLiant BL45p G2",
347 .matches = {
348 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
349 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
350 },
351 },
352 {
353 .callback = set_bf_sort,
354 .ident = "HP ProLiant BL460c G1",
355 .matches = {
356 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
357 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
358 },
359 },
360 {
361 .callback = set_bf_sort,
362 .ident = "HP ProLiant BL465c G1",
363 .matches = {
364 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
365 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
366 },
367 },
368 {
369 .callback = set_bf_sort,
370 .ident = "HP ProLiant BL480c G1",
371 .matches = {
372 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
373 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
374 },
375 },
376 {
377 .callback = set_bf_sort,
378 .ident = "HP ProLiant BL685c G1",
379 .matches = {
380 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
381 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
382 },
383 },
384 {
385 .callback = set_bf_sort,
386 .ident = "HP ProLiant DL360",
387 .matches = {
388 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
389 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
390 },
391 },
392 {
393 .callback = set_bf_sort,
394 .ident = "HP ProLiant DL380",
395 .matches = {
396 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
397 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
398 },
399 },
400 #ifdef __i386__
401 {
402 .callback = assign_all_busses,
403 .ident = "Compaq EVO N800c",
404 .matches = {
405 DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
406 DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"),
407 },
408 },
409 #endif
410 {
411 .callback = set_bf_sort,
412 .ident = "HP ProLiant DL385 G2",
413 .matches = {
414 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
415 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
416 },
417 },
418 {
419 .callback = set_bf_sort,
420 .ident = "HP ProLiant DL585 G2",
421 .matches = {
422 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
423 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
424 },
425 },
426 {
427 .callback = set_scan_all,
428 .ident = "Stratus/NEC ftServer",
429 .matches = {
430 DMI_MATCH(DMI_SYS_VENDOR, "Stratus"),
431 DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"),
432 },
433 },
434 {
435 .callback = set_scan_all,
436 .ident = "Stratus/NEC ftServer",
437 .matches = {
438 DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
439 DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R32"),
440 },
441 },
442 {
443 .callback = set_scan_all,
444 .ident = "Stratus/NEC ftServer",
445 .matches = {
446 DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
447 DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R31"),
448 },
449 },
450 {}
451 };
452
dmi_check_pciprobe(void)453 void __init dmi_check_pciprobe(void)
454 {
455 dmi_check_system(pciprobe_dmi_table);
456 }
457
pcibios_scan_root(int busnum)458 void pcibios_scan_root(int busnum)
459 {
460 struct pci_bus *bus;
461 struct pci_sysdata *sd;
462 LIST_HEAD(resources);
463
464 sd = kzalloc(sizeof(*sd), GFP_KERNEL);
465 if (!sd) {
466 printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum);
467 return;
468 }
469 sd->node = x86_pci_root_bus_node(busnum);
470 x86_pci_root_bus_resources(busnum, &resources);
471 printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
472 bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources);
473 if (!bus) {
474 pci_free_resource_list(&resources);
475 kfree(sd);
476 return;
477 }
478 pci_bus_add_devices(bus);
479 }
480
pcibios_set_cache_line_size(void)481 void __init pcibios_set_cache_line_size(void)
482 {
483 struct cpuinfo_x86 *c = &boot_cpu_data;
484
485 /*
486 * Set PCI cacheline size to that of the CPU if the CPU has reported it.
487 * (For older CPUs that don't support cpuid, we se it to 32 bytes
488 * It's also good for 386/486s (which actually have 16)
489 * as quite a few PCI devices do not support smaller values.
490 */
491 if (c->x86_clflush_size > 0) {
492 pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
493 printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
494 pci_dfl_cache_line_size << 2);
495 } else {
496 pci_dfl_cache_line_size = 32 >> 2;
497 printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
498 }
499 }
500
pcibios_init(void)501 int __init pcibios_init(void)
502 {
503 if (!raw_pci_ops && !raw_pci_ext_ops) {
504 printk(KERN_WARNING "PCI: System does not support PCI\n");
505 return 0;
506 }
507
508 pcibios_set_cache_line_size();
509 pcibios_resource_survey();
510
511 if (pci_bf_sort >= pci_force_bf)
512 pci_sort_breadthfirst();
513 return 0;
514 }
515
pcibios_setup(char * str)516 char *__init pcibios_setup(char *str)
517 {
518 if (!strcmp(str, "off")) {
519 pci_probe = 0;
520 return NULL;
521 } else if (!strcmp(str, "bfsort")) {
522 pci_bf_sort = pci_force_bf;
523 return NULL;
524 } else if (!strcmp(str, "nobfsort")) {
525 pci_bf_sort = pci_force_nobf;
526 return NULL;
527 }
528 #ifdef CONFIG_PCI_BIOS
529 else if (!strcmp(str, "bios")) {
530 pci_probe = PCI_PROBE_BIOS;
531 return NULL;
532 } else if (!strcmp(str, "nobios")) {
533 pci_probe &= ~PCI_PROBE_BIOS;
534 return NULL;
535 } else if (!strcmp(str, "biosirq")) {
536 pci_probe |= PCI_BIOS_IRQ_SCAN;
537 return NULL;
538 } else if (!strncmp(str, "pirqaddr=", 9)) {
539 pirq_table_addr = simple_strtoul(str+9, NULL, 0);
540 return NULL;
541 }
542 #endif
543 #ifdef CONFIG_PCI_DIRECT
544 else if (!strcmp(str, "conf1")) {
545 pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
546 return NULL;
547 }
548 else if (!strcmp(str, "conf2")) {
549 pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
550 return NULL;
551 }
552 #endif
553 #ifdef CONFIG_PCI_MMCONFIG
554 else if (!strcmp(str, "nommconf")) {
555 pci_probe &= ~PCI_PROBE_MMCONF;
556 return NULL;
557 }
558 else if (!strcmp(str, "check_enable_amd_mmconf")) {
559 pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
560 return NULL;
561 }
562 #endif
563 else if (!strcmp(str, "noacpi")) {
564 acpi_noirq_set();
565 return NULL;
566 }
567 else if (!strcmp(str, "noearly")) {
568 pci_probe |= PCI_PROBE_NOEARLY;
569 return NULL;
570 }
571 else if (!strcmp(str, "usepirqmask")) {
572 pci_probe |= PCI_USE_PIRQ_MASK;
573 return NULL;
574 } else if (!strncmp(str, "irqmask=", 8)) {
575 pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
576 return NULL;
577 } else if (!strncmp(str, "lastbus=", 8)) {
578 pcibios_last_bus = simple_strtol(str+8, NULL, 0);
579 return NULL;
580 } else if (!strcmp(str, "rom")) {
581 pci_probe |= PCI_ASSIGN_ROMS;
582 return NULL;
583 } else if (!strcmp(str, "norom")) {
584 pci_probe |= PCI_NOASSIGN_ROMS;
585 return NULL;
586 } else if (!strcmp(str, "nobar")) {
587 pci_probe |= PCI_NOASSIGN_BARS;
588 return NULL;
589 } else if (!strcmp(str, "assign-busses")) {
590 pci_probe |= PCI_ASSIGN_ALL_BUSSES;
591 return NULL;
592 } else if (!strcmp(str, "use_crs")) {
593 pci_probe |= PCI_USE__CRS;
594 return NULL;
595 } else if (!strcmp(str, "nocrs")) {
596 pci_probe |= PCI_ROOT_NO_CRS;
597 return NULL;
598 } else if (!strcmp(str, "use_e820")) {
599 pci_probe |= PCI_USE_E820;
600 add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
601 return NULL;
602 } else if (!strcmp(str, "no_e820")) {
603 pci_probe |= PCI_NO_E820;
604 add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
605 return NULL;
606 #ifdef CONFIG_PHYS_ADDR_T_64BIT
607 } else if (!strcmp(str, "big_root_window")) {
608 pci_probe |= PCI_BIG_ROOT_WINDOW;
609 return NULL;
610 #endif
611 } else if (!strcmp(str, "routeirq")) {
612 pci_routeirq = 1;
613 return NULL;
614 } else if (!strcmp(str, "skip_isa_align")) {
615 pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
616 return NULL;
617 } else if (!strcmp(str, "noioapicquirk")) {
618 noioapicquirk = 1;
619 return NULL;
620 } else if (!strcmp(str, "ioapicreroute")) {
621 if (noioapicreroute != -1)
622 noioapicreroute = 0;
623 return NULL;
624 } else if (!strcmp(str, "noioapicreroute")) {
625 if (noioapicreroute != -1)
626 noioapicreroute = 1;
627 return NULL;
628 }
629 return str;
630 }
631
pcibios_assign_all_busses(void)632 unsigned int pcibios_assign_all_busses(void)
633 {
634 return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
635 }
636
set_dev_domain_options(struct pci_dev * pdev)637 static void set_dev_domain_options(struct pci_dev *pdev)
638 {
639 if (is_vmd(pdev->bus))
640 pdev->hotplug_user_indicators = 1;
641 }
642
pcibios_device_add(struct pci_dev * dev)643 int pcibios_device_add(struct pci_dev *dev)
644 {
645 struct pci_setup_rom *rom;
646 struct irq_domain *msidom;
647 struct setup_data *data;
648 u64 pa_data;
649
650 pa_data = boot_params.hdr.setup_data;
651 while (pa_data) {
652 data = memremap(pa_data, sizeof(*rom), MEMREMAP_WB);
653 if (!data)
654 return -ENOMEM;
655
656 if (data->type == SETUP_PCI) {
657 rom = (struct pci_setup_rom *)data;
658
659 if ((pci_domain_nr(dev->bus) == rom->segment) &&
660 (dev->bus->number == rom->bus) &&
661 (PCI_SLOT(dev->devfn) == rom->device) &&
662 (PCI_FUNC(dev->devfn) == rom->function) &&
663 (dev->vendor == rom->vendor) &&
664 (dev->device == rom->devid)) {
665 dev->rom = pa_data +
666 offsetof(struct pci_setup_rom, romdata);
667 dev->romlen = rom->pcilen;
668 }
669 }
670 pa_data = data->next;
671 memunmap(data);
672 }
673 set_dev_domain_options(dev);
674
675 /*
676 * Setup the initial MSI domain of the device. If the underlying
677 * bus has a PCI/MSI irqdomain associated use the bus domain,
678 * otherwise set the default domain. This ensures that special irq
679 * domains e.g. VMD are preserved. The default ensures initial
680 * operation if irq remapping is not active. If irq remapping is
681 * active it will overwrite the domain pointer when the device is
682 * associated to a remapping domain.
683 */
684 msidom = dev_get_msi_domain(&dev->bus->dev);
685 if (!msidom)
686 msidom = x86_pci_msi_default_domain;
687 dev_set_msi_domain(&dev->dev, msidom);
688 return 0;
689 }
690
pcibios_enable_device(struct pci_dev * dev,int mask)691 int pcibios_enable_device(struct pci_dev *dev, int mask)
692 {
693 int err;
694
695 if ((err = pci_enable_resources(dev, mask)) < 0)
696 return err;
697
698 if (!pci_dev_msi_enabled(dev))
699 return pcibios_enable_irq(dev);
700 return 0;
701 }
702
pcibios_disable_device(struct pci_dev * dev)703 void pcibios_disable_device (struct pci_dev *dev)
704 {
705 if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
706 pcibios_disable_irq(dev);
707 }
708
709 #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
pcibios_release_device(struct pci_dev * dev)710 void pcibios_release_device(struct pci_dev *dev)
711 {
712 if (atomic_dec_return(&dev->enable_cnt) >= 0)
713 pcibios_disable_device(dev);
714
715 }
716 #endif
717
pci_ext_cfg_avail(void)718 int pci_ext_cfg_avail(void)
719 {
720 if (raw_pci_ext_ops)
721 return 1;
722 else
723 return 0;
724 }
725
726 #if IS_ENABLED(CONFIG_VMD)
pci_real_dma_dev(struct pci_dev * dev)727 struct pci_dev *pci_real_dma_dev(struct pci_dev *dev)
728 {
729 if (is_vmd(dev->bus))
730 return to_pci_sysdata(dev->bus)->vmd_dev;
731
732 return dev;
733 }
734 #endif
735