1 /*
2 * Moorestown PCI support
3 * Copyright (c) 2008 Intel Corporation
4 * Jesse Barnes <jesse.barnes@intel.com>
5 *
6 * Moorestown has an interesting PCI implementation:
7 * - configuration space is memory mapped (as defined by MCFG)
8 * - Lincroft devices also have a real, type 1 configuration space
9 * - Early Lincroft silicon has a type 1 access bug that will cause
10 * a hang if non-existent devices are accessed
11 * - some devices have the "fixed BAR" capability, which means
12 * they can't be relocated or modified; check for that during
13 * BAR sizing
14 *
15 * So, we use the MCFG space for all reads and writes, but also send
16 * Lincroft writes to type 1 space. But only read/write if the device
17 * actually exists, otherwise return all 1s for reads and bit bucket
18 * the writes.
19 */
20
21 #include <linux/sched.h>
22 #include <linux/pci.h>
23 #include <linux/ioport.h>
24 #include <linux/init.h>
25 #include <linux/dmi.h>
26
27 #include <asm/acpi.h>
28 #include <asm/segment.h>
29 #include <asm/io.h>
30 #include <asm/smp.h>
31 #include <asm/pci_x86.h>
32 #include <asm/hw_irq.h>
33 #include <asm/io_apic.h>
34
35 #define PCIE_CAP_OFFSET 0x100
36
37 /* Fixed BAR fields */
38 #define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */
39 #define PCI_FIXED_BAR_0_SIZE 0x04
40 #define PCI_FIXED_BAR_1_SIZE 0x08
41 #define PCI_FIXED_BAR_2_SIZE 0x0c
42 #define PCI_FIXED_BAR_3_SIZE 0x10
43 #define PCI_FIXED_BAR_4_SIZE 0x14
44 #define PCI_FIXED_BAR_5_SIZE 0x1c
45
46 static int pci_soc_mode = 0;
47
48 /**
49 * fixed_bar_cap - return the offset of the fixed BAR cap if found
50 * @bus: PCI bus
51 * @devfn: device in question
52 *
53 * Look for the fixed BAR cap on @bus and @devfn, returning its offset
54 * if found or 0 otherwise.
55 */
fixed_bar_cap(struct pci_bus * bus,unsigned int devfn)56 static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
57 {
58 int pos;
59 u32 pcie_cap = 0, cap_data;
60
61 pos = PCIE_CAP_OFFSET;
62
63 if (!raw_pci_ext_ops)
64 return 0;
65
66 while (pos) {
67 if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
68 devfn, pos, 4, &pcie_cap))
69 return 0;
70
71 if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
72 PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
73 break;
74
75 if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
76 raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
77 devfn, pos + 4, 4, &cap_data);
78 if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
79 return pos;
80 }
81
82 pos = PCI_EXT_CAP_NEXT(pcie_cap);
83 }
84
85 return 0;
86 }
87
pci_device_update_fixed(struct pci_bus * bus,unsigned int devfn,int reg,int len,u32 val,int offset)88 static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
89 int reg, int len, u32 val, int offset)
90 {
91 u32 size;
92 unsigned int domain, busnum;
93 int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
94
95 domain = pci_domain_nr(bus);
96 busnum = bus->number;
97
98 if (val == ~0 && len == 4) {
99 unsigned long decode;
100
101 raw_pci_ext_ops->read(domain, busnum, devfn,
102 offset + 8 + (bar * 4), 4, &size);
103
104 /* Turn the size into a decode pattern for the sizing code */
105 if (size) {
106 decode = size - 1;
107 decode |= decode >> 1;
108 decode |= decode >> 2;
109 decode |= decode >> 4;
110 decode |= decode >> 8;
111 decode |= decode >> 16;
112 decode++;
113 decode = ~(decode - 1);
114 } else {
115 decode = 0;
116 }
117
118 /*
119 * If val is all ones, the core code is trying to size the reg,
120 * so update the mmconfig space with the real size.
121 *
122 * Note: this assumes the fixed size we got is a power of two.
123 */
124 return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
125 decode);
126 }
127
128 /* This is some other kind of BAR write, so just do it. */
129 return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
130 }
131
132 /**
133 * type1_access_ok - check whether to use type 1
134 * @bus: bus number
135 * @devfn: device & function in question
136 *
137 * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
138 * all, the we can go ahead with any reads & writes. If it's on a Lincroft,
139 * but doesn't exist, avoid the access altogether to keep the chip from
140 * hanging.
141 */
type1_access_ok(unsigned int bus,unsigned int devfn,int reg)142 static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
143 {
144 /* This is a workaround for A0 LNC bug where PCI status register does
145 * not have new CAP bit set. can not be written by SW either.
146 *
147 * PCI header type in real LNC indicates a single function device, this
148 * will prevent probing other devices under the same function in PCI
149 * shim. Therefore, use the header type in shim instead.
150 */
151 if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
152 return 0;
153 if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
154 || devfn == PCI_DEVFN(0, 0)
155 || devfn == PCI_DEVFN(3, 0)))
156 return 1;
157 return 0; /* langwell on others */
158 }
159
pci_read(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 * value)160 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
161 int size, u32 *value)
162 {
163 if (type1_access_ok(bus->number, devfn, where))
164 return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
165 devfn, where, size, value);
166 return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
167 devfn, where, size, value);
168 }
169
pci_write(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 value)170 static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
171 int size, u32 value)
172 {
173 int offset;
174
175 /* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
176 * to ROM BAR return 0 then being ignored.
177 */
178 if (where == PCI_ROM_ADDRESS)
179 return 0;
180
181 /*
182 * Devices with fixed BARs need special handling:
183 * - BAR sizing code will save, write ~0, read size, restore
184 * - so writes to fixed BARs need special handling
185 * - other writes to fixed BAR devices should go through mmconfig
186 */
187 offset = fixed_bar_cap(bus, devfn);
188 if (offset &&
189 (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
190 return pci_device_update_fixed(bus, devfn, where, size, value,
191 offset);
192 }
193
194 /*
195 * On Moorestown update both real & mmconfig space
196 * Note: early Lincroft silicon can't handle type 1 accesses to
197 * non-existent devices, so just eat the write in that case.
198 */
199 if (type1_access_ok(bus->number, devfn, where))
200 return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
201 devfn, where, size, value);
202 return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
203 where, size, value);
204 }
205
mrst_pci_irq_enable(struct pci_dev * dev)206 static int mrst_pci_irq_enable(struct pci_dev *dev)
207 {
208 u8 pin;
209 struct io_apic_irq_attr irq_attr;
210
211 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
212
213 /* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
214 * IOAPIC RTE entries, so we just enable RTE for the device.
215 */
216 irq_attr.ioapic = mp_find_ioapic(dev->irq);
217 irq_attr.ioapic_pin = dev->irq;
218 irq_attr.trigger = 1; /* level */
219 irq_attr.polarity = 1; /* active low */
220 io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
221
222 return 0;
223 }
224
225 struct pci_ops pci_mrst_ops = {
226 .read = pci_read,
227 .write = pci_write,
228 };
229
230 /**
231 * pci_mrst_init - installs pci_mrst_ops
232 *
233 * Moorestown has an interesting PCI implementation (see above).
234 * Called when the early platform detection installs it.
235 */
pci_mrst_init(void)236 int __init pci_mrst_init(void)
237 {
238 printk(KERN_INFO "Intel MID platform detected, using MID PCI ops\n");
239 pci_mmcfg_late_init();
240 pcibios_enable_irq = mrst_pci_irq_enable;
241 pci_root_ops = pci_mrst_ops;
242 pci_soc_mode = 1;
243 /* Continue with standard init */
244 return 1;
245 }
246
247 /* Langwell devices are not true pci devices, they are not subject to 10 ms
248 * d3 to d0 delay required by pci spec.
249 */
pci_d3delay_fixup(struct pci_dev * dev)250 static void __devinit pci_d3delay_fixup(struct pci_dev *dev)
251 {
252 /* PCI fixups are effectively decided compile time. If we have a dual
253 SoC/non-SoC kernel we don't want to mangle d3 on non SoC devices */
254 if (!pci_soc_mode)
255 return;
256 /* true pci devices in lincroft should allow type 1 access, the rest
257 * are langwell fake pci devices.
258 */
259 if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
260 return;
261 dev->d3_delay = 0;
262 }
263 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
264
mrst_power_off_unused_dev(struct pci_dev * dev)265 static void __devinit mrst_power_off_unused_dev(struct pci_dev *dev)
266 {
267 pci_set_power_state(dev, PCI_D3cold);
268 }
269 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
270 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
271 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev);
272 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev);
273 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev);
274
275 /*
276 * Langwell devices reside at fixed offsets, don't try to move them.
277 */
pci_fixed_bar_fixup(struct pci_dev * dev)278 static void __devinit pci_fixed_bar_fixup(struct pci_dev *dev)
279 {
280 unsigned long offset;
281 u32 size;
282 int i;
283
284 if (!pci_soc_mode)
285 return;
286
287 /* Must have extended configuration space */
288 if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
289 return;
290
291 /* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
292 offset = fixed_bar_cap(dev->bus, dev->devfn);
293 if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
294 PCI_DEVFN(2, 2) == dev->devfn)
295 return;
296
297 for (i = 0; i < PCI_ROM_RESOURCE; i++) {
298 pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
299 dev->resource[i].end = dev->resource[i].start + size - 1;
300 dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
301 }
302 }
303 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);
304