1 /*
2 * sound/oss/pas2_card.c
3 *
4 * Detection routine for the Pro Audio Spectrum cards.
5 */
6
7 #include <linux/init.h>
8 #include <linux/interrupt.h>
9 #include <linux/module.h>
10 #include <linux/spinlock.h>
11 #include "sound_config.h"
12
13 #include "pas2.h"
14 #include "sb.h"
15
16 static unsigned char dma_bits[] = {
17 4, 1, 2, 3, 0, 5, 6, 7
18 };
19
20 static unsigned char irq_bits[] = {
21 0, 0, 1, 2, 3, 4, 5, 6, 0, 1, 7, 8, 9, 0, 10, 11
22 };
23
24 static unsigned char sb_irq_bits[] = {
25 0x00, 0x00, 0x08, 0x10, 0x00, 0x18, 0x00, 0x20,
26 0x00, 0x08, 0x28, 0x30, 0x38, 0, 0
27 };
28
29 static unsigned char sb_dma_bits[] = {
30 0x00, 0x40, 0x80, 0xC0, 0, 0, 0, 0
31 };
32
33 /*
34 * The Address Translation code is used to convert I/O register addresses to
35 * be relative to the given base -register
36 */
37
38 int pas_translate_code = 0;
39 static int pas_intr_mask;
40 static int pas_irq;
41 static int pas_sb_base;
42 DEFINE_SPINLOCK(pas_lock);
43 #ifndef CONFIG_PAS_JOYSTICK
44 static int joystick;
45 #else
46 static int joystick = 1;
47 #endif
48 #ifdef SYMPHONY_PAS
49 static int symphony = 1;
50 #else
51 static int symphony;
52 #endif
53 #ifdef BROKEN_BUS_CLOCK
54 static int broken_bus_clock = 1;
55 #else
56 static int broken_bus_clock;
57 #endif
58
59 static struct address_info cfg;
60 static struct address_info cfg2;
61
62 char pas_model = 0;
63 static char *pas_model_names[] = {
64 "",
65 "Pro AudioSpectrum+",
66 "CDPC",
67 "Pro AudioSpectrum 16",
68 "Pro AudioSpectrum 16D"
69 };
70
71 /*
72 * pas_read() and pas_write() are equivalents of inb and outb
73 * These routines perform the I/O address translation required
74 * to support other than the default base address
75 */
76
77 extern void mix_write(unsigned char data, int ioaddr);
78
pas_read(int ioaddr)79 unsigned char pas_read(int ioaddr)
80 {
81 return inb(ioaddr + pas_translate_code);
82 }
83
pas_write(unsigned char data,int ioaddr)84 void pas_write(unsigned char data, int ioaddr)
85 {
86 outb((data), ioaddr + pas_translate_code);
87 }
88
89 /******************* Begin of the Interrupt Handler ********************/
90
pasintr(int irq,void * dev_id)91 static irqreturn_t pasintr(int irq, void *dev_id)
92 {
93 int status;
94
95 status = pas_read(0x0B89);
96 pas_write(status, 0x0B89); /* Clear interrupt */
97
98 if (status & 0x08)
99 {
100 pas_pcm_interrupt(status, 1);
101 status &= ~0x08;
102 }
103 if (status & 0x10)
104 {
105 pas_midi_interrupt();
106 status &= ~0x10;
107 }
108 return IRQ_HANDLED;
109 }
110
pas_set_intr(int mask)111 int pas_set_intr(int mask)
112 {
113 if (!mask)
114 return 0;
115
116 pas_intr_mask |= mask;
117
118 pas_write(pas_intr_mask, 0x0B8B);
119 return 0;
120 }
121
pas_remove_intr(int mask)122 int pas_remove_intr(int mask)
123 {
124 if (!mask)
125 return 0;
126
127 pas_intr_mask &= ~mask;
128 pas_write(pas_intr_mask, 0x0B8B);
129
130 return 0;
131 }
132
133 /******************* End of the Interrupt handler **********************/
134
135 /******************* Begin of the Initialization Code ******************/
136
config_pas_hw(struct address_info * hw_config)137 static int __init config_pas_hw(struct address_info *hw_config)
138 {
139 char ok = 1;
140 unsigned int_ptrs; /* scsi/sound interrupt pointers */
141
142 pas_irq = hw_config->irq;
143
144 pas_write(0x00, 0x0B8B);
145 pas_write(0x36, 0x138B);
146 pas_write(0x36, 0x1388);
147 pas_write(0, 0x1388);
148 pas_write(0x74, 0x138B);
149 pas_write(0x74, 0x1389);
150 pas_write(0, 0x1389);
151
152 pas_write(0x80 | 0x40 | 0x20 | 1, 0x0B8A);
153 pas_write(0x80 | 0x20 | 0x10 | 0x08 | 0x01, 0xF8A);
154 pas_write(0x01 | 0x02 | 0x04 | 0x10 /*
155 * |
156 * 0x80
157 */ , 0xB88);
158
159 pas_write(0x80 | (joystick ? 0x40 : 0), 0xF388);
160
161 if (pas_irq < 0 || pas_irq > 15)
162 {
163 printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
164 hw_config->irq=-1;
165 ok = 0;
166 }
167 else
168 {
169 int_ptrs = pas_read(0xF38A);
170 int_ptrs = (int_ptrs & 0xf0) | irq_bits[pas_irq];
171 pas_write(int_ptrs, 0xF38A);
172 if (!irq_bits[pas_irq])
173 {
174 printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
175 hw_config->irq=-1;
176 ok = 0;
177 }
178 else
179 {
180 if (request_irq(pas_irq, pasintr, 0, "PAS16",hw_config) < 0) {
181 printk(KERN_ERR "PAS16: Cannot allocate IRQ %d\n",pas_irq);
182 hw_config->irq=-1;
183 ok = 0;
184 }
185 }
186 }
187
188 if (hw_config->dma < 0 || hw_config->dma > 7)
189 {
190 printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
191 hw_config->dma=-1;
192 ok = 0;
193 }
194 else
195 {
196 pas_write(dma_bits[hw_config->dma], 0xF389);
197 if (!dma_bits[hw_config->dma])
198 {
199 printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
200 hw_config->dma=-1;
201 ok = 0;
202 }
203 else
204 {
205 if (sound_alloc_dma(hw_config->dma, "PAS16"))
206 {
207 printk(KERN_ERR "pas2_card.c: Can't allocate DMA channel\n");
208 hw_config->dma=-1;
209 ok = 0;
210 }
211 }
212 }
213
214 /*
215 * This fixes the timing problems of the PAS due to the Symphony chipset
216 * as per Media Vision. Only define this if your PAS doesn't work correctly.
217 */
218
219 if(symphony)
220 {
221 outb((0x05), 0xa8);
222 outb((0x60), 0xa9);
223 }
224
225 if(broken_bus_clock)
226 pas_write(0x01 | 0x10 | 0x20 | 0x04, 0x8388);
227 else
228 /*
229 * pas_write(0x01, 0x8388);
230 */
231 pas_write(0x01 | 0x10 | 0x20, 0x8388);
232
233 pas_write(0x18, 0x838A); /* ??? */
234 pas_write(0x20 | 0x01, 0x0B8A); /* Mute off, filter = 17.897 kHz */
235 pas_write(8, 0xBF8A);
236
237 mix_write(0x80 | 5, 0x078B);
238 mix_write(5, 0x078B);
239
240 {
241 struct address_info *sb_config;
242
243 sb_config = &cfg2;
244 if (sb_config->io_base)
245 {
246 unsigned char irq_dma;
247
248 /*
249 * Turn on Sound Blaster compatibility
250 * bit 1 = SB emulation
251 * bit 0 = MPU401 emulation (CDPC only :-( )
252 */
253
254 pas_write(0x02, 0xF788);
255
256 /*
257 * "Emulation address"
258 */
259
260 pas_write((sb_config->io_base >> 4) & 0x0f, 0xF789);
261 pas_sb_base = sb_config->io_base;
262
263 if (!sb_dma_bits[sb_config->dma])
264 printk(KERN_ERR "PAS16 Warning: Invalid SB DMA %d\n\n", sb_config->dma);
265
266 if (!sb_irq_bits[sb_config->irq])
267 printk(KERN_ERR "PAS16 Warning: Invalid SB IRQ %d\n\n", sb_config->irq);
268
269 irq_dma = sb_dma_bits[sb_config->dma] |
270 sb_irq_bits[sb_config->irq];
271
272 pas_write(irq_dma, 0xFB8A);
273 }
274 else
275 pas_write(0x00, 0xF788);
276 }
277
278 if (!ok)
279 printk(KERN_WARNING "PAS16: Driver not enabled\n");
280
281 return ok;
282 }
283
detect_pas_hw(struct address_info * hw_config)284 static int __init detect_pas_hw(struct address_info *hw_config)
285 {
286 unsigned char board_id, foo;
287
288 /*
289 * WARNING: Setting an option like W:1 or so that disables warm boot reset
290 * of the card will screw up this detect code something fierce. Adding code
291 * to handle this means possibly interfering with other cards on the bus if
292 * you have something on base port 0x388. SO be forewarned.
293 */
294
295 outb((0xBC), 0x9A01); /* Activate first board */
296 outb((hw_config->io_base >> 2), 0x9A01); /* Set base address */
297 pas_translate_code = hw_config->io_base - 0x388;
298 pas_write(1, 0xBF88); /* Select one wait states */
299
300 board_id = pas_read(0x0B8B);
301
302 if (board_id == 0xff)
303 return 0;
304
305 /*
306 * We probably have a PAS-series board, now check for a PAS16-series board
307 * by trying to change the board revision bits. PAS16-series hardware won't
308 * let you do this - the bits are read-only.
309 */
310
311 foo = board_id ^ 0xe0;
312
313 pas_write(foo, 0x0B8B);
314 foo = pas_read(0x0B8B);
315 pas_write(board_id, 0x0B8B);
316
317 if (board_id != foo)
318 return 0;
319
320 pas_model = pas_read(0xFF88);
321
322 return pas_model;
323 }
324
attach_pas_card(struct address_info * hw_config)325 static void __init attach_pas_card(struct address_info *hw_config)
326 {
327 pas_irq = hw_config->irq;
328
329 if (detect_pas_hw(hw_config))
330 {
331
332 if ((pas_model = pas_read(0xFF88)))
333 {
334 char temp[100];
335
336 sprintf(temp,
337 "%s rev %d", pas_model_names[(int) pas_model],
338 pas_read(0x2789));
339 conf_printf(temp, hw_config);
340 }
341 if (config_pas_hw(hw_config))
342 {
343 pas_pcm_init(hw_config);
344 pas_midi_init();
345 pas_init_mixer();
346 }
347 }
348 }
349
probe_pas(struct address_info * hw_config)350 static inline int __init probe_pas(struct address_info *hw_config)
351 {
352 return detect_pas_hw(hw_config);
353 }
354
unload_pas(struct address_info * hw_config)355 static void __exit unload_pas(struct address_info *hw_config)
356 {
357 extern int pas_audiodev;
358 extern int pas2_mididev;
359
360 if (hw_config->dma>0)
361 sound_free_dma(hw_config->dma);
362 if (hw_config->irq>0)
363 free_irq(hw_config->irq, hw_config);
364
365 if(pas_audiodev!=-1)
366 sound_unload_mixerdev(audio_devs[pas_audiodev]->mixer_dev);
367 if(pas2_mididev!=-1)
368 sound_unload_mididev(pas2_mididev);
369 if(pas_audiodev!=-1)
370 sound_unload_audiodev(pas_audiodev);
371 }
372
373 static int __initdata io = -1;
374 static int __initdata irq = -1;
375 static int __initdata dma = -1;
376 static int __initdata dma16 = -1; /* Set this for modules that need it */
377
378 static int __initdata sb_io = 0;
379 static int __initdata sb_irq = -1;
380 static int __initdata sb_dma = -1;
381 static int __initdata sb_dma16 = -1;
382
383 module_param(io, int, 0);
384 module_param(irq, int, 0);
385 module_param(dma, int, 0);
386 module_param(dma16, int, 0);
387
388 module_param(sb_io, int, 0);
389 module_param(sb_irq, int, 0);
390 module_param(sb_dma, int, 0);
391 module_param(sb_dma16, int, 0);
392
393 module_param(joystick, bool, 0);
394 module_param(symphony, bool, 0);
395 module_param(broken_bus_clock, bool, 0);
396
397 MODULE_LICENSE("GPL");
398
init_pas2(void)399 static int __init init_pas2(void)
400 {
401 printk(KERN_INFO "Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996\n");
402
403 cfg.io_base = io;
404 cfg.irq = irq;
405 cfg.dma = dma;
406 cfg.dma2 = dma16;
407
408 cfg2.io_base = sb_io;
409 cfg2.irq = sb_irq;
410 cfg2.dma = sb_dma;
411 cfg2.dma2 = sb_dma16;
412
413 if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
414 printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
415 return -EINVAL;
416 }
417
418 if (!probe_pas(&cfg))
419 return -ENODEV;
420 attach_pas_card(&cfg);
421
422 return 0;
423 }
424
cleanup_pas2(void)425 static void __exit cleanup_pas2(void)
426 {
427 unload_pas(&cfg);
428 }
429
430 module_init(init_pas2);
431 module_exit(cleanup_pas2);
432
433 #ifndef MODULE
setup_pas2(char * str)434 static int __init setup_pas2(char *str)
435 {
436 /* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, sb_dma2 */
437 int ints[9];
438
439 str = get_options(str, ARRAY_SIZE(ints), ints);
440
441 io = ints[1];
442 irq = ints[2];
443 dma = ints[3];
444 dma16 = ints[4];
445
446 sb_io = ints[5];
447 sb_irq = ints[6];
448 sb_dma = ints[7];
449 sb_dma16 = ints[8];
450
451 return 1;
452 }
453
454 __setup("pas2=", setup_pas2);
455 #endif
456