1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/arch/arm/mach-omap2/id.c
4 *
5 * OMAP2 CPU identification code
6 *
7 * Copyright (C) 2005 Nokia Corporation
8 * Written by Tony Lindgren <tony@atomide.com>
9 *
10 * Copyright (C) 2009-11 Texas Instruments
11 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
12 */
13
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/io.h>
18 #include <linux/random.h>
19 #include <linux/slab.h>
20
21 #ifdef CONFIG_SOC_BUS
22 #include <linux/sys_soc.h>
23 #endif
24
25 #include <asm/cputype.h>
26
27 #include "common.h"
28
29 #include "id.h"
30
31 #include "soc.h"
32 #include "control.h"
33
34 #define OMAP4_SILICON_TYPE_STANDARD 0x01
35 #define OMAP4_SILICON_TYPE_PERFORMANCE 0x02
36
37 #define OMAP_SOC_MAX_NAME_LENGTH 16
38
39 static unsigned int omap_revision;
40 static char soc_name[OMAP_SOC_MAX_NAME_LENGTH];
41 static char soc_rev[OMAP_SOC_MAX_NAME_LENGTH];
42 u32 omap_features;
43
omap_rev(void)44 unsigned int omap_rev(void)
45 {
46 return omap_revision;
47 }
48 EXPORT_SYMBOL(omap_rev);
49
omap_type(void)50 int omap_type(void)
51 {
52 static u32 val = OMAP2_DEVICETYPE_MASK;
53
54 if (val < OMAP2_DEVICETYPE_MASK)
55 return val;
56
57 if (soc_is_omap24xx()) {
58 val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
59 } else if (soc_is_ti81xx()) {
60 val = omap_ctrl_readl(TI81XX_CONTROL_STATUS);
61 } else if (soc_is_am33xx() || soc_is_am43xx()) {
62 val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
63 } else if (soc_is_omap34xx()) {
64 val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
65 } else if (soc_is_omap44xx()) {
66 val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
67 } else if (soc_is_omap54xx() || soc_is_dra7xx()) {
68 val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
69 val &= OMAP5_DEVICETYPE_MASK;
70 val >>= 6;
71 goto out;
72 } else {
73 pr_err("Cannot detect omap type!\n");
74 goto out;
75 }
76
77 val &= OMAP2_DEVICETYPE_MASK;
78 val >>= 8;
79
80 out:
81 return val;
82 }
83 EXPORT_SYMBOL(omap_type);
84
85
86 /*----------------------------------------------------------------------------*/
87
88 #define OMAP_TAP_IDCODE 0x0204
89 #define OMAP_TAP_DIE_ID_0 0x0218
90 #define OMAP_TAP_DIE_ID_1 0x021C
91 #define OMAP_TAP_DIE_ID_2 0x0220
92 #define OMAP_TAP_DIE_ID_3 0x0224
93
94 #define OMAP_TAP_DIE_ID_44XX_0 0x0200
95 #define OMAP_TAP_DIE_ID_44XX_1 0x0208
96 #define OMAP_TAP_DIE_ID_44XX_2 0x020c
97 #define OMAP_TAP_DIE_ID_44XX_3 0x0210
98
99 #define read_tap_reg(reg) readl_relaxed(tap_base + (reg))
100
101 struct omap_id {
102 u16 hawkeye; /* Silicon type (Hawkeye id) */
103 u8 dev; /* Device type from production_id reg */
104 u32 type; /* Combined type id copied to omap_revision */
105 };
106
107 /* Register values to detect the OMAP version */
108 static struct omap_id omap_ids[] __initdata = {
109 { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200024 },
110 { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201024 },
111 { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202024 },
112 { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220024 },
113 { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230024 },
114 { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300024 },
115 };
116
117 static void __iomem *tap_base;
118 static u16 tap_prod_id;
119
omap_get_die_id(struct omap_die_id * odi)120 void omap_get_die_id(struct omap_die_id *odi)
121 {
122 if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
123 odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
124 odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
125 odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
126 odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_3);
127
128 return;
129 }
130 odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_0);
131 odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_1);
132 odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_2);
133 odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
134 }
135
omap_feed_randpool(void)136 static int __init omap_feed_randpool(void)
137 {
138 struct omap_die_id odi;
139
140 /* Throw the die ID into the entropy pool at boot */
141 omap_get_die_id(&odi);
142 add_device_randomness(&odi, sizeof(odi));
143 return 0;
144 }
145 omap_device_initcall(omap_feed_randpool);
146
omap2xxx_check_revision(void)147 void __init omap2xxx_check_revision(void)
148 {
149 int i, j;
150 u32 idcode, prod_id;
151 u16 hawkeye;
152 u8 dev_type, rev;
153 struct omap_die_id odi;
154
155 idcode = read_tap_reg(OMAP_TAP_IDCODE);
156 prod_id = read_tap_reg(tap_prod_id);
157 hawkeye = (idcode >> 12) & 0xffff;
158 rev = (idcode >> 28) & 0x0f;
159 dev_type = (prod_id >> 16) & 0x0f;
160 omap_get_die_id(&odi);
161
162 pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
163 idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
164 pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0);
165 pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
166 odi.id_1, (odi.id_1 >> 28) & 0xf);
167 pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2);
168 pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3);
169 pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
170 prod_id, dev_type);
171
172 /* Check hawkeye ids */
173 for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
174 if (hawkeye == omap_ids[i].hawkeye)
175 break;
176 }
177
178 if (i == ARRAY_SIZE(omap_ids)) {
179 printk(KERN_ERR "Unknown OMAP CPU id\n");
180 return;
181 }
182
183 for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
184 if (dev_type == omap_ids[j].dev)
185 break;
186 }
187
188 if (j == ARRAY_SIZE(omap_ids)) {
189 pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",
190 omap_ids[i].type >> 16);
191 j = i;
192 }
193
194 sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
195 sprintf(soc_rev, "ES%x", (omap_rev() >> 12) & 0xf);
196
197 pr_info("%s", soc_name);
198 if ((omap_rev() >> 8) & 0x0f)
199 pr_cont("%s", soc_rev);
200 pr_cont("\n");
201 }
202
203 #define OMAP3_SHOW_FEATURE(feat) \
204 if (omap3_has_ ##feat()) \
205 n += scnprintf(buf + n, sizeof(buf) - n, #feat " ");
206
omap3_cpuinfo(void)207 static void __init omap3_cpuinfo(void)
208 {
209 const char *cpu_name;
210 char buf[64];
211 int n = 0;
212
213 memset(buf, 0, sizeof(buf));
214
215 /*
216 * OMAP3430 and OMAP3530 are assumed to be same.
217 *
218 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
219 * on available features. Upon detection, update the CPU id
220 * and CPU class bits.
221 */
222 if (soc_is_omap3630()) {
223 if (omap3_has_iva() && omap3_has_sgx()) {
224 cpu_name = (omap3_has_isp()) ? "OMAP3630/DM3730" : "OMAP3621";
225 } else if (omap3_has_iva()) {
226 cpu_name = "DM3725";
227 } else if (omap3_has_sgx()) {
228 cpu_name = "OMAP3615/AM3715";
229 } else {
230 cpu_name = (omap3_has_isp()) ? "AM3703" : "OMAP3611";
231 }
232 } else if (soc_is_am35xx()) {
233 cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
234 } else if (soc_is_ti816x()) {
235 cpu_name = "TI816X";
236 } else if (soc_is_am335x()) {
237 cpu_name = "AM335X";
238 } else if (soc_is_am437x()) {
239 cpu_name = "AM437x";
240 } else if (soc_is_ti814x()) {
241 cpu_name = "TI814X";
242 } else if (omap3_has_iva() && omap3_has_sgx()) {
243 /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
244 cpu_name = "OMAP3430/3530";
245 } else if (omap3_has_iva()) {
246 cpu_name = "OMAP3525";
247 } else if (omap3_has_sgx()) {
248 cpu_name = "OMAP3515";
249 } else {
250 cpu_name = "OMAP3503";
251 }
252
253 scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name);
254
255 /* Print verbose information */
256 n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev);
257
258 OMAP3_SHOW_FEATURE(l2cache);
259 OMAP3_SHOW_FEATURE(iva);
260 OMAP3_SHOW_FEATURE(sgx);
261 OMAP3_SHOW_FEATURE(neon);
262 OMAP3_SHOW_FEATURE(isp);
263 OMAP3_SHOW_FEATURE(192mhz_clk);
264 if (*(buf + n - 1) == ' ')
265 n--;
266 n += scnprintf(buf + n, sizeof(buf) - n, ")\n");
267 pr_info("%s", buf);
268 }
269
270 #define OMAP3_CHECK_FEATURE(status,feat) \
271 if (((status & OMAP3_ ##feat## _MASK) \
272 >> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \
273 omap_features |= OMAP3_HAS_ ##feat; \
274 }
275
omap3xxx_check_features(void)276 void __init omap3xxx_check_features(void)
277 {
278 u32 status;
279
280 omap_features = 0;
281
282 status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
283
284 OMAP3_CHECK_FEATURE(status, L2CACHE);
285 OMAP3_CHECK_FEATURE(status, IVA);
286 OMAP3_CHECK_FEATURE(status, SGX);
287 OMAP3_CHECK_FEATURE(status, NEON);
288 OMAP3_CHECK_FEATURE(status, ISP);
289 if (soc_is_omap3630())
290 omap_features |= OMAP3_HAS_192MHZ_CLK;
291 if (soc_is_omap3430() || soc_is_omap3630())
292 omap_features |= OMAP3_HAS_IO_WAKEUP;
293 if (soc_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
294 omap_rev() == OMAP3430_REV_ES3_1_2)
295 omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
296
297 omap_features |= OMAP3_HAS_SDRC;
298
299 /*
300 * am35x fixups:
301 * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
302 * reserved and therefore return 0 when read. Unfortunately,
303 * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
304 * mean that a feature is present even though it isn't so clear
305 * the incorrectly set feature bits.
306 */
307 if (soc_is_am35xx())
308 omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
309
310 /*
311 * TODO: Get additional info (where applicable)
312 * e.g. Size of L2 cache.
313 */
314
315 omap3_cpuinfo();
316 }
317
omap4xxx_check_features(void)318 void __init omap4xxx_check_features(void)
319 {
320 u32 si_type;
321
322 si_type =
323 (read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1) >> 16) & 0x03;
324
325 if (si_type == OMAP4_SILICON_TYPE_PERFORMANCE)
326 omap_features = OMAP4_HAS_PERF_SILICON;
327 }
328
ti81xx_check_features(void)329 void __init ti81xx_check_features(void)
330 {
331 omap_features = OMAP3_HAS_NEON;
332 omap3_cpuinfo();
333 }
334
am33xx_check_features(void)335 void __init am33xx_check_features(void)
336 {
337 u32 status;
338
339 omap_features = OMAP3_HAS_NEON;
340
341 status = omap_ctrl_readl(AM33XX_DEV_FEATURE);
342 if (status & AM33XX_SGX_MASK)
343 omap_features |= OMAP3_HAS_SGX;
344
345 omap3_cpuinfo();
346 }
347
omap3xxx_check_revision(void)348 void __init omap3xxx_check_revision(void)
349 {
350 const char *cpu_rev;
351 u32 cpuid, idcode;
352 u16 hawkeye;
353 u8 rev;
354
355 /*
356 * We cannot access revision registers on ES1.0.
357 * If the processor type is Cortex-A8 and the revision is 0x0
358 * it means its Cortex r0p0 which is 3430 ES1.0.
359 */
360 cpuid = read_cpuid_id();
361 if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
362 omap_revision = OMAP3430_REV_ES1_0;
363 cpu_rev = "1.0";
364 return;
365 }
366
367 /*
368 * Detection for 34xx ES2.0 and above can be done with just
369 * hawkeye and rev. See TRM 1.5.2 Device Identification.
370 * Note that rev does not map directly to our defined processor
371 * revision numbers as ES1.0 uses value 0.
372 */
373 idcode = read_tap_reg(OMAP_TAP_IDCODE);
374 hawkeye = (idcode >> 12) & 0xffff;
375 rev = (idcode >> 28) & 0xff;
376
377 switch (hawkeye) {
378 case 0xb7ae:
379 /* Handle 34xx/35xx devices */
380 switch (rev) {
381 case 0: /* Take care of early samples */
382 case 1:
383 omap_revision = OMAP3430_REV_ES2_0;
384 cpu_rev = "2.0";
385 break;
386 case 2:
387 omap_revision = OMAP3430_REV_ES2_1;
388 cpu_rev = "2.1";
389 break;
390 case 3:
391 omap_revision = OMAP3430_REV_ES3_0;
392 cpu_rev = "3.0";
393 break;
394 case 4:
395 omap_revision = OMAP3430_REV_ES3_1;
396 cpu_rev = "3.1";
397 break;
398 case 7:
399 default:
400 /* Use the latest known revision as default */
401 omap_revision = OMAP3430_REV_ES3_1_2;
402 cpu_rev = "3.1.2";
403 }
404 break;
405 case 0xb868:
406 /*
407 * Handle OMAP/AM 3505/3517 devices
408 *
409 * Set the device to be OMAP3517 here. Actual device
410 * is identified later based on the features.
411 */
412 switch (rev) {
413 case 0:
414 omap_revision = AM35XX_REV_ES1_0;
415 cpu_rev = "1.0";
416 break;
417 case 1:
418 default:
419 omap_revision = AM35XX_REV_ES1_1;
420 cpu_rev = "1.1";
421 }
422 break;
423 case 0xb891:
424 /* Handle 36xx devices */
425
426 switch(rev) {
427 case 0: /* Take care of early samples */
428 omap_revision = OMAP3630_REV_ES1_0;
429 cpu_rev = "1.0";
430 break;
431 case 1:
432 omap_revision = OMAP3630_REV_ES1_1;
433 cpu_rev = "1.1";
434 break;
435 case 2:
436 default:
437 omap_revision = OMAP3630_REV_ES1_2;
438 cpu_rev = "1.2";
439 }
440 break;
441 case 0xb81e:
442 switch (rev) {
443 case 0:
444 omap_revision = TI8168_REV_ES1_0;
445 cpu_rev = "1.0";
446 break;
447 case 1:
448 omap_revision = TI8168_REV_ES1_1;
449 cpu_rev = "1.1";
450 break;
451 case 2:
452 omap_revision = TI8168_REV_ES2_0;
453 cpu_rev = "2.0";
454 break;
455 case 3:
456 default:
457 omap_revision = TI8168_REV_ES2_1;
458 cpu_rev = "2.1";
459 }
460 break;
461 case 0xb944:
462 switch (rev) {
463 case 0:
464 omap_revision = AM335X_REV_ES1_0;
465 cpu_rev = "1.0";
466 break;
467 case 1:
468 omap_revision = AM335X_REV_ES2_0;
469 cpu_rev = "2.0";
470 break;
471 case 2:
472 default:
473 omap_revision = AM335X_REV_ES2_1;
474 cpu_rev = "2.1";
475 break;
476 }
477 break;
478 case 0xb98c:
479 switch (rev) {
480 case 0:
481 omap_revision = AM437X_REV_ES1_0;
482 cpu_rev = "1.0";
483 break;
484 case 1:
485 omap_revision = AM437X_REV_ES1_1;
486 cpu_rev = "1.1";
487 break;
488 case 2:
489 default:
490 omap_revision = AM437X_REV_ES1_2;
491 cpu_rev = "1.2";
492 break;
493 }
494 break;
495 case 0xb8f2:
496 case 0xb968:
497 switch (rev) {
498 case 0:
499 case 1:
500 omap_revision = TI8148_REV_ES1_0;
501 cpu_rev = "1.0";
502 break;
503 case 2:
504 omap_revision = TI8148_REV_ES2_0;
505 cpu_rev = "2.0";
506 break;
507 case 3:
508 default:
509 omap_revision = TI8148_REV_ES2_1;
510 cpu_rev = "2.1";
511 break;
512 }
513 break;
514 default:
515 /* Unknown default to latest silicon rev as default */
516 omap_revision = OMAP3630_REV_ES1_2;
517 cpu_rev = "1.2";
518 pr_warn("Warning: unknown chip type: hawkeye %04x, assuming OMAP3630ES1.2\n",
519 hawkeye);
520 }
521 sprintf(soc_rev, "ES%s", cpu_rev);
522 }
523
omap4xxx_check_revision(void)524 void __init omap4xxx_check_revision(void)
525 {
526 u32 idcode;
527 u16 hawkeye;
528 u8 rev;
529
530 /*
531 * The IC rev detection is done with hawkeye and rev.
532 * Note that rev does not map directly to defined processor
533 * revision numbers as ES1.0 uses value 0.
534 */
535 idcode = read_tap_reg(OMAP_TAP_IDCODE);
536 hawkeye = (idcode >> 12) & 0xffff;
537 rev = (idcode >> 28) & 0xf;
538
539 /*
540 * Few initial 4430 ES2.0 samples IDCODE is same as ES1.0
541 * Use ARM register to detect the correct ES version
542 */
543 if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) {
544 idcode = read_cpuid_id();
545 rev = (idcode & 0xf) - 1;
546 }
547
548 switch (hawkeye) {
549 case 0xb852:
550 switch (rev) {
551 case 0:
552 omap_revision = OMAP4430_REV_ES1_0;
553 break;
554 case 1:
555 default:
556 omap_revision = OMAP4430_REV_ES2_0;
557 }
558 break;
559 case 0xb95c:
560 switch (rev) {
561 case 3:
562 omap_revision = OMAP4430_REV_ES2_1;
563 break;
564 case 4:
565 omap_revision = OMAP4430_REV_ES2_2;
566 break;
567 case 6:
568 default:
569 omap_revision = OMAP4430_REV_ES2_3;
570 }
571 break;
572 case 0xb94e:
573 switch (rev) {
574 case 0:
575 omap_revision = OMAP4460_REV_ES1_0;
576 break;
577 case 2:
578 default:
579 omap_revision = OMAP4460_REV_ES1_1;
580 break;
581 }
582 break;
583 case 0xb975:
584 switch (rev) {
585 case 0:
586 default:
587 omap_revision = OMAP4470_REV_ES1_0;
588 break;
589 }
590 break;
591 default:
592 /* Unknown default to latest silicon rev as default */
593 omap_revision = OMAP4430_REV_ES2_3;
594 }
595
596 sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
597 sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf,
598 (omap_rev() >> 8) & 0xf);
599 pr_info("%s %s\n", soc_name, soc_rev);
600 }
601
omap5xxx_check_revision(void)602 void __init omap5xxx_check_revision(void)
603 {
604 u32 idcode;
605 u16 hawkeye;
606 u8 rev;
607
608 idcode = read_tap_reg(OMAP_TAP_IDCODE);
609 hawkeye = (idcode >> 12) & 0xffff;
610 rev = (idcode >> 28) & 0xff;
611 switch (hawkeye) {
612 case 0xb942:
613 switch (rev) {
614 case 0:
615 /* No support for ES1.0 Test chip */
616 BUG();
617 case 1:
618 default:
619 omap_revision = OMAP5430_REV_ES2_0;
620 }
621 break;
622
623 case 0xb998:
624 switch (rev) {
625 case 0:
626 /* No support for ES1.0 Test chip */
627 BUG();
628 case 1:
629 default:
630 omap_revision = OMAP5432_REV_ES2_0;
631 }
632 break;
633
634 default:
635 /* Unknown default to latest silicon rev as default*/
636 omap_revision = OMAP5430_REV_ES2_0;
637 }
638
639 sprintf(soc_name, "OMAP%04x", omap_rev() >> 16);
640 sprintf(soc_rev, "ES%d.0", (omap_rev() >> 12) & 0xf);
641
642 pr_info("%s %s\n", soc_name, soc_rev);
643 }
644
dra7xxx_check_revision(void)645 void __init dra7xxx_check_revision(void)
646 {
647 u32 idcode;
648 u16 hawkeye;
649 u8 rev, package;
650 struct omap_die_id odi;
651
652 omap_get_die_id(&odi);
653 package = (odi.id_2 >> 16) & 0x3;
654 idcode = read_tap_reg(OMAP_TAP_IDCODE);
655 hawkeye = (idcode >> 12) & 0xffff;
656 rev = (idcode >> 28) & 0xff;
657 switch (hawkeye) {
658 case 0xbb50:
659 switch (rev) {
660 case 0:
661 default:
662 switch (package) {
663 case 0x2:
664 omap_revision = DRA762_ABZ_REV_ES1_0;
665 break;
666 case 0x3:
667 omap_revision = DRA762_ACD_REV_ES1_0;
668 break;
669 default:
670 omap_revision = DRA762_REV_ES1_0;
671 break;
672 }
673 break;
674 }
675 break;
676
677 case 0xb990:
678 switch (rev) {
679 case 0:
680 omap_revision = DRA752_REV_ES1_0;
681 break;
682 case 1:
683 omap_revision = DRA752_REV_ES1_1;
684 break;
685 case 2:
686 default:
687 omap_revision = DRA752_REV_ES2_0;
688 break;
689 }
690 break;
691
692 case 0xb9bc:
693 switch (rev) {
694 case 0:
695 omap_revision = DRA722_REV_ES1_0;
696 break;
697 case 1:
698 omap_revision = DRA722_REV_ES2_0;
699 break;
700 case 2:
701 default:
702 omap_revision = DRA722_REV_ES2_1;
703 break;
704 }
705 break;
706
707 default:
708 /* Unknown default to latest silicon rev as default*/
709 pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
710 __func__, idcode, hawkeye, rev);
711 omap_revision = DRA752_REV_ES2_0;
712 }
713
714 sprintf(soc_name, "DRA%03x", omap_rev() >> 16);
715 sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf,
716 (omap_rev() >> 8) & 0xf);
717
718 pr_info("%s %s\n", soc_name, soc_rev);
719 }
720
721 /*
722 * Set up things for map_io and processor detection later on. Gets called
723 * pretty much first thing from board init. For multi-omap, this gets
724 * cpu_is_omapxxxx() working accurately enough for map_io. Then we'll try to
725 * detect the exact revision later on in omap2_detect_revision() once map_io
726 * is done.
727 */
omap2_set_globals_tap(u32 class,void __iomem * tap)728 void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
729 {
730 omap_revision = class;
731 tap_base = tap;
732
733 /* XXX What is this intended to do? */
734 if (soc_is_omap34xx())
735 tap_prod_id = 0x0210;
736 else
737 tap_prod_id = 0x0208;
738 }
739
740 #ifdef CONFIG_SOC_BUS
741
742 static const char * const omap_types[] = {
743 [OMAP2_DEVICE_TYPE_TEST] = "TST",
744 [OMAP2_DEVICE_TYPE_EMU] = "EMU",
745 [OMAP2_DEVICE_TYPE_SEC] = "HS",
746 [OMAP2_DEVICE_TYPE_GP] = "GP",
747 [OMAP2_DEVICE_TYPE_BAD] = "BAD",
748 };
749
omap_get_family(void)750 static const char * __init omap_get_family(void)
751 {
752 if (soc_is_omap24xx())
753 return kasprintf(GFP_KERNEL, "OMAP2");
754 else if (soc_is_omap34xx())
755 return kasprintf(GFP_KERNEL, "OMAP3");
756 else if (soc_is_omap44xx())
757 return kasprintf(GFP_KERNEL, "OMAP4");
758 else if (soc_is_omap54xx())
759 return kasprintf(GFP_KERNEL, "OMAP5");
760 else if (soc_is_am33xx() || soc_is_am335x())
761 return kasprintf(GFP_KERNEL, "AM33xx");
762 else if (soc_is_am43xx())
763 return kasprintf(GFP_KERNEL, "AM43xx");
764 else if (soc_is_dra7xx())
765 return kasprintf(GFP_KERNEL, "DRA7");
766 else
767 return kasprintf(GFP_KERNEL, "Unknown");
768 }
769
770 static ssize_t
type_show(struct device * dev,struct device_attribute * attr,char * buf)771 type_show(struct device *dev, struct device_attribute *attr, char *buf)
772 {
773 return sprintf(buf, "%s\n", omap_types[omap_type()]);
774 }
775
776 static DEVICE_ATTR_RO(type);
777
778 static struct attribute *omap_soc_attrs[] = {
779 &dev_attr_type.attr,
780 NULL
781 };
782
783 ATTRIBUTE_GROUPS(omap_soc);
784
omap_soc_device_init(void)785 void __init omap_soc_device_init(void)
786 {
787 struct soc_device *soc_dev;
788 struct soc_device_attribute *soc_dev_attr;
789
790 soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
791 if (!soc_dev_attr)
792 return;
793
794 soc_dev_attr->machine = soc_name;
795 soc_dev_attr->family = omap_get_family();
796 soc_dev_attr->revision = soc_rev;
797 soc_dev_attr->custom_attr_group = omap_soc_groups[0];
798
799 soc_dev = soc_device_register(soc_dev_attr);
800 if (IS_ERR(soc_dev)) {
801 kfree(soc_dev_attr);
802 return;
803 }
804 }
805 #endif /* CONFIG_SOC_BUS */
806