1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 #ifndef __HWMON_NCT6775_H__
3 #define __HWMON_NCT6775_H__
4
5 #include <linux/types.h>
6
7 enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
8 nct6793, nct6795, nct6796, nct6797, nct6798 };
9 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
10
11 #define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/
12 #define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */
13 #define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */
14
15 #define NUM_REG_ALARM 7 /* Max number of alarm registers */
16 #define NUM_REG_BEEP 5 /* Max number of beep registers */
17
18 #define NUM_FAN 7
19
20 struct nct6775_data {
21 int addr; /* IO base of hw monitor block */
22 int sioreg; /* SIO register address */
23 enum kinds kind;
24 const char *name;
25
26 const struct attribute_group *groups[7];
27 u8 num_groups;
28
29 u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
30 * 3=temp_crit, 4=temp_lcrit
31 */
32 u8 temp_src[NUM_TEMP];
33 u16 reg_temp_config[NUM_TEMP];
34 const char * const *temp_label;
35 u32 temp_mask;
36 u32 virt_temp_mask;
37
38 u16 REG_CONFIG;
39 u16 REG_VBAT;
40 u16 REG_DIODE;
41 u8 DIODE_MASK;
42
43 const s8 *ALARM_BITS;
44 const s8 *BEEP_BITS;
45
46 const u16 *REG_VIN;
47 const u16 *REG_IN_MINMAX[2];
48
49 const u16 *REG_TARGET;
50 const u16 *REG_FAN;
51 const u16 *REG_FAN_MODE;
52 const u16 *REG_FAN_MIN;
53 const u16 *REG_FAN_PULSES;
54 const u16 *FAN_PULSE_SHIFT;
55 const u16 *REG_FAN_TIME[3];
56
57 const u16 *REG_TOLERANCE_H;
58
59 const u8 *REG_PWM_MODE;
60 const u8 *PWM_MODE_MASK;
61
62 const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
63 * [3]=pwm_max, [4]=pwm_step,
64 * [5]=weight_duty_step, [6]=weight_duty_base
65 */
66 const u16 *REG_PWM_READ;
67
68 const u16 *REG_CRITICAL_PWM_ENABLE;
69 u8 CRITICAL_PWM_ENABLE_MASK;
70 const u16 *REG_CRITICAL_PWM;
71
72 const u16 *REG_AUTO_TEMP;
73 const u16 *REG_AUTO_PWM;
74
75 const u16 *REG_CRITICAL_TEMP;
76 const u16 *REG_CRITICAL_TEMP_TOLERANCE;
77
78 const u16 *REG_TEMP_SOURCE; /* temp register sources */
79 const u16 *REG_TEMP_SEL;
80 const u16 *REG_WEIGHT_TEMP_SEL;
81 const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */
82
83 const u16 *REG_TEMP_OFFSET;
84
85 const u16 *REG_ALARM;
86 const u16 *REG_BEEP;
87
88 const u16 *REG_TSI_TEMP;
89
90 unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
91 unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
92
93 struct mutex update_lock;
94 bool valid; /* true if following fields are valid */
95 unsigned long last_updated; /* In jiffies */
96
97 /* Register values */
98 u8 bank; /* current register bank */
99 u8 in_num; /* number of in inputs we have */
100 u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */
101 unsigned int rpm[NUM_FAN];
102 u16 fan_min[NUM_FAN];
103 u8 fan_pulses[NUM_FAN];
104 u8 fan_div[NUM_FAN];
105 u8 has_pwm;
106 u8 has_fan; /* some fan inputs can be disabled */
107 u8 has_fan_min; /* some fans don't have min register */
108 bool has_fan_div;
109
110 u8 num_temp_alarms; /* 2, 3, or 6 */
111 u8 num_temp_beeps; /* 2, 3, or 6 */
112 u8 temp_fixed_num; /* 3 or 6 */
113 u8 temp_type[NUM_TEMP_FIXED];
114 s8 temp_offset[NUM_TEMP_FIXED];
115 s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
116 * 3=temp_crit, 4=temp_lcrit
117 */
118 s16 tsi_temp[NUM_TSI_TEMP];
119 u64 alarms;
120 u64 beeps;
121
122 u8 pwm_num; /* number of pwm */
123 u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage,
124 * 1->PWM variable duty cycle
125 */
126 enum pwm_enable pwm_enable[NUM_FAN];
127 /* 0->off
128 * 1->manual
129 * 2->thermal cruise mode (also called SmartFan I)
130 * 3->fan speed cruise mode
131 * 4->SmartFan III
132 * 5->enhanced variable thermal cruise (SmartFan IV)
133 */
134 u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
135 * [3]=pwm_max, [4]=pwm_step,
136 * [5]=weight_duty_step, [6]=weight_duty_base
137 */
138
139 u8 target_temp[NUM_FAN];
140 u8 target_temp_mask;
141 u32 target_speed[NUM_FAN];
142 u32 target_speed_tolerance[NUM_FAN];
143 u8 speed_tolerance_limit;
144
145 u8 temp_tolerance[2][NUM_FAN];
146 u8 tolerance_mask;
147
148 u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */
149
150 /* Automatic fan speed control registers */
151 int auto_pwm_num;
152 u8 auto_pwm[NUM_FAN][7];
153 u8 auto_temp[NUM_FAN][7];
154 u8 pwm_temp_sel[NUM_FAN];
155 u8 pwm_weight_temp_sel[NUM_FAN];
156 u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol,
157 * 2->temp_base
158 */
159
160 u8 vid;
161 u8 vrm;
162
163 bool have_vid;
164
165 u16 have_temp;
166 u16 have_temp_fixed;
167 u16 have_tsi_temp;
168 u16 have_in;
169
170 /* Remember extra register values over suspend/resume */
171 u8 vbat;
172 u8 fandiv1;
173 u8 fandiv2;
174 u8 sio_reg_enable;
175
176 struct regmap *regmap;
177 bool read_only;
178
179 /* driver-specific (platform, i2c) initialization hook and data */
180 int (*driver_init)(struct nct6775_data *data);
181 void *driver_data;
182 };
183
nct6775_read_value(struct nct6775_data * data,u16 reg,u16 * value)184 static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value)
185 {
186 unsigned int tmp;
187 int ret = regmap_read(data->regmap, reg, &tmp);
188
189 if (!ret)
190 *value = tmp;
191 return ret;
192 }
193
nct6775_write_value(struct nct6775_data * data,u16 reg,u16 value)194 static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value)
195 {
196 return regmap_write(data->regmap, reg, value);
197 }
198
199 struct nct6775_data *nct6775_update_device(struct device *dev);
200
201 bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg);
202 int nct6775_probe(struct device *dev, struct nct6775_data *data,
203 const struct regmap_config *regmapcfg);
204
205 ssize_t nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf);
206 ssize_t nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf);
207 ssize_t nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
208 size_t count);
209
nct6775_write_temp(struct nct6775_data * data,u16 reg,u16 value)210 static inline int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value)
211 {
212 if (!nct6775_reg_is_word_sized(data, reg))
213 value >>= 8;
214 return nct6775_write_value(data, reg, value);
215 }
216
nct6775_attr_mode(struct nct6775_data * data,struct attribute * attr)217 static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr)
218 {
219 return data->read_only ? (attr->mode & ~0222) : attr->mode;
220 }
221
222 static inline int
nct6775_add_attr_group(struct nct6775_data * data,const struct attribute_group * group)223 nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group)
224 {
225 /* Need to leave a NULL terminator at the end of data->groups */
226 if (data->num_groups == ARRAY_SIZE(data->groups) - 1)
227 return -ENOBUFS;
228
229 data->groups[data->num_groups++] = group;
230 return 0;
231 }
232
233 #define NCT6775_REG_BANK 0x4E
234 #define NCT6775_REG_CONFIG 0x40
235
236 #define NCT6775_REG_FANDIV1 0x506
237 #define NCT6775_REG_FANDIV2 0x507
238
239 #define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28
240
241 #define FAN_ALARM_BASE 16
242 #define TEMP_ALARM_BASE 24
243 #define INTRUSION_ALARM_BASE 30
244 #define BEEP_ENABLE_BASE 15
245
246 /*
247 * Not currently used:
248 * REG_MAN_ID has the value 0x5ca3 for all supported chips.
249 * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
250 * REG_MAN_ID is at port 0x4f
251 * REG_CHIP_ID is at port 0x58
252 */
253
254 #endif /* __HWMON_NCT6775_H__ */
255