1 #ifndef __PARISC_SYSTEM_H
2 #define __PARISC_SYSTEM_H
3
4 #include <linux/irqflags.h>
5
6 /* The program status word as bitfields. */
7 struct pa_psw {
8 unsigned int y:1;
9 unsigned int z:1;
10 unsigned int rv:2;
11 unsigned int w:1;
12 unsigned int e:1;
13 unsigned int s:1;
14 unsigned int t:1;
15
16 unsigned int h:1;
17 unsigned int l:1;
18 unsigned int n:1;
19 unsigned int x:1;
20 unsigned int b:1;
21 unsigned int c:1;
22 unsigned int v:1;
23 unsigned int m:1;
24
25 unsigned int cb:8;
26
27 unsigned int o:1;
28 unsigned int g:1;
29 unsigned int f:1;
30 unsigned int r:1;
31 unsigned int q:1;
32 unsigned int p:1;
33 unsigned int d:1;
34 unsigned int i:1;
35 };
36
37 #ifdef CONFIG_64BIT
38 #define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW + 4))
39 #else
40 #define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW))
41 #endif
42
43 struct task_struct;
44
45 extern struct task_struct *_switch_to(struct task_struct *, struct task_struct *);
46
47 #define switch_to(prev, next, last) do { \
48 (last) = _switch_to(prev, next); \
49 } while(0)
50
51 #define mfctl(reg) ({ \
52 unsigned long cr; \
53 __asm__ __volatile__( \
54 "mfctl " #reg ",%0" : \
55 "=r" (cr) \
56 ); \
57 cr; \
58 })
59
60 #define mtctl(gr, cr) \
61 __asm__ __volatile__("mtctl %0,%1" \
62 : /* no outputs */ \
63 : "r" (gr), "i" (cr) : "memory")
64
65 /* these are here to de-mystefy the calling code, and to provide hooks */
66 /* which I needed for debugging EIEM problems -PB */
67 #define get_eiem() mfctl(15)
set_eiem(unsigned long val)68 static inline void set_eiem(unsigned long val)
69 {
70 mtctl(val, 15);
71 }
72
73 #define mfsp(reg) ({ \
74 unsigned long cr; \
75 __asm__ __volatile__( \
76 "mfsp " #reg ",%0" : \
77 "=r" (cr) \
78 ); \
79 cr; \
80 })
81
82 #define mtsp(gr, cr) \
83 __asm__ __volatile__("mtsp %0,%1" \
84 : /* no outputs */ \
85 : "r" (gr), "i" (cr) : "memory")
86
87
88 /*
89 ** This is simply the barrier() macro from linux/kernel.h but when serial.c
90 ** uses tqueue.h uses smp_mb() defined using barrier(), linux/kernel.h
91 ** hasn't yet been included yet so it fails, thus repeating the macro here.
92 **
93 ** PA-RISC architecture allows for weakly ordered memory accesses although
94 ** none of the processors use it. There is a strong ordered bit that is
95 ** set in the O-bit of the page directory entry. Operating systems that
96 ** can not tolerate out of order accesses should set this bit when mapping
97 ** pages. The O-bit of the PSW should also be set to 1 (I don't believe any
98 ** of the processor implemented the PSW O-bit). The PCX-W ERS states that
99 ** the TLB O-bit is not implemented so the page directory does not need to
100 ** have the O-bit set when mapping pages (section 3.1). This section also
101 ** states that the PSW Y, Z, G, and O bits are not implemented.
102 ** So it looks like nothing needs to be done for parisc-linux (yet).
103 ** (thanks to chada for the above comment -ggg)
104 **
105 ** The __asm__ op below simple prevents gcc/ld from reordering
106 ** instructions across the mb() "call".
107 */
108 #define mb() __asm__ __volatile__("":::"memory") /* barrier() */
109 #define rmb() mb()
110 #define wmb() mb()
111 #define smp_mb() mb()
112 #define smp_rmb() mb()
113 #define smp_wmb() mb()
114 #define smp_read_barrier_depends() do { } while(0)
115 #define read_barrier_depends() do { } while(0)
116
117 #define set_mb(var, value) do { var = value; mb(); } while (0)
118
119 #ifndef CONFIG_PA20
120 /* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
121 and GCC only guarantees 8-byte alignment for stack locals, we can't
122 be assured of 16-byte alignment for atomic lock data even if we
123 specify "__attribute ((aligned(16)))" in the type declaration. So,
124 we use a struct containing an array of four ints for the atomic lock
125 type and dynamically select the 16-byte aligned int from the array
126 for the semaphore. */
127
128 #define __PA_LDCW_ALIGNMENT 16
129 #define __ldcw_align(a) ({ \
130 unsigned long __ret = (unsigned long) &(a)->lock[0]; \
131 __ret = (__ret + __PA_LDCW_ALIGNMENT - 1) \
132 & ~(__PA_LDCW_ALIGNMENT - 1); \
133 (volatile unsigned int *) __ret; \
134 })
135 #define __LDCW "ldcw"
136
137 #else /*CONFIG_PA20*/
138 /* From: "Jim Hull" <jim.hull of hp.com>
139 I've attached a summary of the change, but basically, for PA 2.0, as
140 long as the ",CO" (coherent operation) completer is specified, then the
141 16-byte alignment requirement for ldcw and ldcd is relaxed, and instead
142 they only require "natural" alignment (4-byte for ldcw, 8-byte for
143 ldcd). */
144
145 #define __PA_LDCW_ALIGNMENT 4
146 #define __ldcw_align(a) (&(a)->slock)
147 #define __LDCW "ldcw,co"
148
149 #endif /*!CONFIG_PA20*/
150
151 /* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
152 #define __ldcw(a) ({ \
153 unsigned __ret; \
154 __asm__ __volatile__(__LDCW " 0(%2),%0" \
155 : "=r" (__ret), "+m" (*(a)) : "r" (a)); \
156 __ret; \
157 })
158
159 #ifdef CONFIG_SMP
160 # define __lock_aligned __attribute__((__section__(".data..lock_aligned")))
161 #endif
162
163 #define arch_align_stack(x) (x)
164
165 #endif
166