1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (C) 2018 Linus Walleij <linus.walleij@linaro.org>
4 * Parts of this file were based on the MCDE driver by Marcus Lorentzon
5 * (C) ST-Ericsson SA 2013
6 */
7 #include <linux/clk.h>
8 #include <linux/delay.h>
9 #include <linux/dma-buf.h>
10 #include <linux/regulator/consumer.h>
11 #include <linux/media-bus-format.h>
12
13 #include <drm/drm_device.h>
14 #include <drm/drm_fb_cma_helper.h>
15 #include <drm/drm_fourcc.h>
16 #include <drm/drm_gem_atomic_helper.h>
17 #include <drm/drm_gem_cma_helper.h>
18 #include <drm/drm_mipi_dsi.h>
19 #include <drm/drm_simple_kms_helper.h>
20 #include <drm/drm_bridge.h>
21 #include <drm/drm_vblank.h>
22 #include <video/mipi_display.h>
23
24 #include "mcde_drm.h"
25 #include "mcde_display_regs.h"
26
27 enum mcde_fifo {
28 MCDE_FIFO_A,
29 MCDE_FIFO_B,
30 /* TODO: implement FIFO C0 and FIFO C1 */
31 };
32
33 enum mcde_channel {
34 MCDE_CHANNEL_0 = 0,
35 MCDE_CHANNEL_1,
36 MCDE_CHANNEL_2,
37 MCDE_CHANNEL_3,
38 };
39
40 enum mcde_extsrc {
41 MCDE_EXTSRC_0 = 0,
42 MCDE_EXTSRC_1,
43 MCDE_EXTSRC_2,
44 MCDE_EXTSRC_3,
45 MCDE_EXTSRC_4,
46 MCDE_EXTSRC_5,
47 MCDE_EXTSRC_6,
48 MCDE_EXTSRC_7,
49 MCDE_EXTSRC_8,
50 MCDE_EXTSRC_9,
51 };
52
53 enum mcde_overlay {
54 MCDE_OVERLAY_0 = 0,
55 MCDE_OVERLAY_1,
56 MCDE_OVERLAY_2,
57 MCDE_OVERLAY_3,
58 MCDE_OVERLAY_4,
59 MCDE_OVERLAY_5,
60 };
61
62 enum mcde_formatter {
63 MCDE_DSI_FORMATTER_0 = 0,
64 MCDE_DSI_FORMATTER_1,
65 MCDE_DSI_FORMATTER_2,
66 MCDE_DSI_FORMATTER_3,
67 MCDE_DSI_FORMATTER_4,
68 MCDE_DSI_FORMATTER_5,
69 MCDE_DPI_FORMATTER_0,
70 MCDE_DPI_FORMATTER_1,
71 };
72
mcde_display_irq(struct mcde * mcde)73 void mcde_display_irq(struct mcde *mcde)
74 {
75 u32 mispp, misovl, mischnl;
76 bool vblank = false;
77
78 /* Handle display IRQs */
79 mispp = readl(mcde->regs + MCDE_MISPP);
80 misovl = readl(mcde->regs + MCDE_MISOVL);
81 mischnl = readl(mcde->regs + MCDE_MISCHNL);
82
83 /*
84 * Handle IRQs from the DSI link. All IRQs from the DSI links
85 * are just latched onto the MCDE IRQ line, so we need to traverse
86 * any active DSI masters and check if an IRQ is originating from
87 * them.
88 *
89 * TODO: Currently only one DSI link is supported.
90 */
91 if (!mcde->dpi_output && mcde_dsi_irq(mcde->mdsi)) {
92 u32 val;
93
94 /*
95 * In oneshot mode we do not send continuous updates
96 * to the display, instead we only push out updates when
97 * the update function is called, then we disable the
98 * flow on the channel once we get the TE IRQ.
99 */
100 if (mcde->flow_mode == MCDE_COMMAND_ONESHOT_FLOW) {
101 spin_lock(&mcde->flow_lock);
102 if (--mcde->flow_active == 0) {
103 dev_dbg(mcde->dev, "TE0 IRQ\n");
104 /* Disable FIFO A flow */
105 val = readl(mcde->regs + MCDE_CRA0);
106 val &= ~MCDE_CRX0_FLOEN;
107 writel(val, mcde->regs + MCDE_CRA0);
108 }
109 spin_unlock(&mcde->flow_lock);
110 }
111 }
112
113 /* Vblank from one of the channels */
114 if (mispp & MCDE_PP_VCMPA) {
115 dev_dbg(mcde->dev, "chnl A vblank IRQ\n");
116 vblank = true;
117 }
118 if (mispp & MCDE_PP_VCMPB) {
119 dev_dbg(mcde->dev, "chnl B vblank IRQ\n");
120 vblank = true;
121 }
122 if (mispp & MCDE_PP_VCMPC0)
123 dev_dbg(mcde->dev, "chnl C0 vblank IRQ\n");
124 if (mispp & MCDE_PP_VCMPC1)
125 dev_dbg(mcde->dev, "chnl C1 vblank IRQ\n");
126 if (mispp & MCDE_PP_VSCC0)
127 dev_dbg(mcde->dev, "chnl C0 TE IRQ\n");
128 if (mispp & MCDE_PP_VSCC1)
129 dev_dbg(mcde->dev, "chnl C1 TE IRQ\n");
130 writel(mispp, mcde->regs + MCDE_RISPP);
131
132 if (vblank)
133 drm_crtc_handle_vblank(&mcde->pipe.crtc);
134
135 if (misovl)
136 dev_info(mcde->dev, "some stray overlay IRQ %08x\n", misovl);
137 writel(misovl, mcde->regs + MCDE_RISOVL);
138
139 if (mischnl)
140 dev_info(mcde->dev, "some stray channel error IRQ %08x\n",
141 mischnl);
142 writel(mischnl, mcde->regs + MCDE_RISCHNL);
143 }
144
mcde_display_disable_irqs(struct mcde * mcde)145 void mcde_display_disable_irqs(struct mcde *mcde)
146 {
147 /* Disable all IRQs */
148 writel(0, mcde->regs + MCDE_IMSCPP);
149 writel(0, mcde->regs + MCDE_IMSCOVL);
150 writel(0, mcde->regs + MCDE_IMSCCHNL);
151
152 /* Clear any pending IRQs */
153 writel(0xFFFFFFFF, mcde->regs + MCDE_RISPP);
154 writel(0xFFFFFFFF, mcde->regs + MCDE_RISOVL);
155 writel(0xFFFFFFFF, mcde->regs + MCDE_RISCHNL);
156 }
157
mcde_display_check(struct drm_simple_display_pipe * pipe,struct drm_plane_state * pstate,struct drm_crtc_state * cstate)158 static int mcde_display_check(struct drm_simple_display_pipe *pipe,
159 struct drm_plane_state *pstate,
160 struct drm_crtc_state *cstate)
161 {
162 const struct drm_display_mode *mode = &cstate->mode;
163 struct drm_framebuffer *old_fb = pipe->plane.state->fb;
164 struct drm_framebuffer *fb = pstate->fb;
165
166 if (fb) {
167 u32 offset = drm_fb_cma_get_gem_addr(fb, pstate, 0);
168
169 /* FB base address must be dword aligned. */
170 if (offset & 3) {
171 DRM_DEBUG_KMS("FB not 32-bit aligned\n");
172 return -EINVAL;
173 }
174
175 /*
176 * There's no pitch register, the mode's hdisplay
177 * controls this.
178 */
179 if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0]) {
180 DRM_DEBUG_KMS("can't handle pitches\n");
181 return -EINVAL;
182 }
183
184 /*
185 * We can't change the FB format in a flicker-free
186 * manner (and only update it during CRTC enable).
187 */
188 if (old_fb && old_fb->format != fb->format)
189 cstate->mode_changed = true;
190 }
191
192 return 0;
193 }
194
mcde_configure_extsrc(struct mcde * mcde,enum mcde_extsrc src,u32 format)195 static int mcde_configure_extsrc(struct mcde *mcde, enum mcde_extsrc src,
196 u32 format)
197 {
198 u32 val;
199 u32 conf;
200 u32 cr;
201
202 switch (src) {
203 case MCDE_EXTSRC_0:
204 conf = MCDE_EXTSRC0CONF;
205 cr = MCDE_EXTSRC0CR;
206 break;
207 case MCDE_EXTSRC_1:
208 conf = MCDE_EXTSRC1CONF;
209 cr = MCDE_EXTSRC1CR;
210 break;
211 case MCDE_EXTSRC_2:
212 conf = MCDE_EXTSRC2CONF;
213 cr = MCDE_EXTSRC2CR;
214 break;
215 case MCDE_EXTSRC_3:
216 conf = MCDE_EXTSRC3CONF;
217 cr = MCDE_EXTSRC3CR;
218 break;
219 case MCDE_EXTSRC_4:
220 conf = MCDE_EXTSRC4CONF;
221 cr = MCDE_EXTSRC4CR;
222 break;
223 case MCDE_EXTSRC_5:
224 conf = MCDE_EXTSRC5CONF;
225 cr = MCDE_EXTSRC5CR;
226 break;
227 case MCDE_EXTSRC_6:
228 conf = MCDE_EXTSRC6CONF;
229 cr = MCDE_EXTSRC6CR;
230 break;
231 case MCDE_EXTSRC_7:
232 conf = MCDE_EXTSRC7CONF;
233 cr = MCDE_EXTSRC7CR;
234 break;
235 case MCDE_EXTSRC_8:
236 conf = MCDE_EXTSRC8CONF;
237 cr = MCDE_EXTSRC8CR;
238 break;
239 case MCDE_EXTSRC_9:
240 conf = MCDE_EXTSRC9CONF;
241 cr = MCDE_EXTSRC9CR;
242 break;
243 }
244
245 /*
246 * Configure external source 0 one buffer (buffer 0)
247 * primary overlay ID 0.
248 * From mcde_hw.c ovly_update_registers() in the vendor tree
249 */
250 val = 0 << MCDE_EXTSRCXCONF_BUF_ID_SHIFT;
251 val |= 1 << MCDE_EXTSRCXCONF_BUF_NB_SHIFT;
252 val |= 0 << MCDE_EXTSRCXCONF_PRI_OVLID_SHIFT;
253
254 switch (format) {
255 case DRM_FORMAT_ARGB8888:
256 val |= MCDE_EXTSRCXCONF_BPP_ARGB8888 <<
257 MCDE_EXTSRCXCONF_BPP_SHIFT;
258 break;
259 case DRM_FORMAT_ABGR8888:
260 val |= MCDE_EXTSRCXCONF_BPP_ARGB8888 <<
261 MCDE_EXTSRCXCONF_BPP_SHIFT;
262 val |= MCDE_EXTSRCXCONF_BGR;
263 break;
264 case DRM_FORMAT_XRGB8888:
265 val |= MCDE_EXTSRCXCONF_BPP_XRGB8888 <<
266 MCDE_EXTSRCXCONF_BPP_SHIFT;
267 break;
268 case DRM_FORMAT_XBGR8888:
269 val |= MCDE_EXTSRCXCONF_BPP_XRGB8888 <<
270 MCDE_EXTSRCXCONF_BPP_SHIFT;
271 val |= MCDE_EXTSRCXCONF_BGR;
272 break;
273 case DRM_FORMAT_RGB888:
274 val |= MCDE_EXTSRCXCONF_BPP_RGB888 <<
275 MCDE_EXTSRCXCONF_BPP_SHIFT;
276 break;
277 case DRM_FORMAT_BGR888:
278 val |= MCDE_EXTSRCXCONF_BPP_RGB888 <<
279 MCDE_EXTSRCXCONF_BPP_SHIFT;
280 val |= MCDE_EXTSRCXCONF_BGR;
281 break;
282 case DRM_FORMAT_ARGB4444:
283 val |= MCDE_EXTSRCXCONF_BPP_ARGB4444 <<
284 MCDE_EXTSRCXCONF_BPP_SHIFT;
285 break;
286 case DRM_FORMAT_ABGR4444:
287 val |= MCDE_EXTSRCXCONF_BPP_ARGB4444 <<
288 MCDE_EXTSRCXCONF_BPP_SHIFT;
289 val |= MCDE_EXTSRCXCONF_BGR;
290 break;
291 case DRM_FORMAT_XRGB4444:
292 val |= MCDE_EXTSRCXCONF_BPP_RGB444 <<
293 MCDE_EXTSRCXCONF_BPP_SHIFT;
294 break;
295 case DRM_FORMAT_XBGR4444:
296 val |= MCDE_EXTSRCXCONF_BPP_RGB444 <<
297 MCDE_EXTSRCXCONF_BPP_SHIFT;
298 val |= MCDE_EXTSRCXCONF_BGR;
299 break;
300 case DRM_FORMAT_XRGB1555:
301 val |= MCDE_EXTSRCXCONF_BPP_IRGB1555 <<
302 MCDE_EXTSRCXCONF_BPP_SHIFT;
303 break;
304 case DRM_FORMAT_XBGR1555:
305 val |= MCDE_EXTSRCXCONF_BPP_IRGB1555 <<
306 MCDE_EXTSRCXCONF_BPP_SHIFT;
307 val |= MCDE_EXTSRCXCONF_BGR;
308 break;
309 case DRM_FORMAT_RGB565:
310 val |= MCDE_EXTSRCXCONF_BPP_RGB565 <<
311 MCDE_EXTSRCXCONF_BPP_SHIFT;
312 break;
313 case DRM_FORMAT_BGR565:
314 val |= MCDE_EXTSRCXCONF_BPP_RGB565 <<
315 MCDE_EXTSRCXCONF_BPP_SHIFT;
316 val |= MCDE_EXTSRCXCONF_BGR;
317 break;
318 case DRM_FORMAT_YUV422:
319 val |= MCDE_EXTSRCXCONF_BPP_YCBCR422 <<
320 MCDE_EXTSRCXCONF_BPP_SHIFT;
321 break;
322 default:
323 dev_err(mcde->dev, "Unknown pixel format 0x%08x\n",
324 format);
325 return -EINVAL;
326 }
327 writel(val, mcde->regs + conf);
328
329 /* Software select, primary */
330 val = MCDE_EXTSRCXCR_SEL_MOD_SOFTWARE_SEL;
331 val |= MCDE_EXTSRCXCR_MULTIOVL_CTRL_PRIMARY;
332 writel(val, mcde->regs + cr);
333
334 return 0;
335 }
336
mcde_configure_overlay(struct mcde * mcde,enum mcde_overlay ovl,enum mcde_extsrc src,enum mcde_channel ch,const struct drm_display_mode * mode,u32 format,int cpp)337 static void mcde_configure_overlay(struct mcde *mcde, enum mcde_overlay ovl,
338 enum mcde_extsrc src,
339 enum mcde_channel ch,
340 const struct drm_display_mode *mode,
341 u32 format, int cpp)
342 {
343 u32 val;
344 u32 conf1;
345 u32 conf2;
346 u32 crop;
347 u32 ljinc;
348 u32 cr;
349 u32 comp;
350 u32 pixel_fetcher_watermark;
351
352 switch (ovl) {
353 case MCDE_OVERLAY_0:
354 conf1 = MCDE_OVL0CONF;
355 conf2 = MCDE_OVL0CONF2;
356 crop = MCDE_OVL0CROP;
357 ljinc = MCDE_OVL0LJINC;
358 cr = MCDE_OVL0CR;
359 comp = MCDE_OVL0COMP;
360 break;
361 case MCDE_OVERLAY_1:
362 conf1 = MCDE_OVL1CONF;
363 conf2 = MCDE_OVL1CONF2;
364 crop = MCDE_OVL1CROP;
365 ljinc = MCDE_OVL1LJINC;
366 cr = MCDE_OVL1CR;
367 comp = MCDE_OVL1COMP;
368 break;
369 case MCDE_OVERLAY_2:
370 conf1 = MCDE_OVL2CONF;
371 conf2 = MCDE_OVL2CONF2;
372 crop = MCDE_OVL2CROP;
373 ljinc = MCDE_OVL2LJINC;
374 cr = MCDE_OVL2CR;
375 comp = MCDE_OVL2COMP;
376 break;
377 case MCDE_OVERLAY_3:
378 conf1 = MCDE_OVL3CONF;
379 conf2 = MCDE_OVL3CONF2;
380 crop = MCDE_OVL3CROP;
381 ljinc = MCDE_OVL3LJINC;
382 cr = MCDE_OVL3CR;
383 comp = MCDE_OVL3COMP;
384 break;
385 case MCDE_OVERLAY_4:
386 conf1 = MCDE_OVL4CONF;
387 conf2 = MCDE_OVL4CONF2;
388 crop = MCDE_OVL4CROP;
389 ljinc = MCDE_OVL4LJINC;
390 cr = MCDE_OVL4CR;
391 comp = MCDE_OVL4COMP;
392 break;
393 case MCDE_OVERLAY_5:
394 conf1 = MCDE_OVL5CONF;
395 conf2 = MCDE_OVL5CONF2;
396 crop = MCDE_OVL5CROP;
397 ljinc = MCDE_OVL5LJINC;
398 cr = MCDE_OVL5CR;
399 comp = MCDE_OVL5COMP;
400 break;
401 }
402
403 val = mode->hdisplay << MCDE_OVLXCONF_PPL_SHIFT;
404 val |= mode->vdisplay << MCDE_OVLXCONF_LPF_SHIFT;
405 /* Use external source 0 that we just configured */
406 val |= src << MCDE_OVLXCONF_EXTSRC_ID_SHIFT;
407 writel(val, mcde->regs + conf1);
408
409 val = MCDE_OVLXCONF2_BP_PER_PIXEL_ALPHA;
410 val |= 0xff << MCDE_OVLXCONF2_ALPHAVALUE_SHIFT;
411 /* OPQ: overlay is opaque */
412 switch (format) {
413 case DRM_FORMAT_ARGB8888:
414 case DRM_FORMAT_ABGR8888:
415 case DRM_FORMAT_ARGB4444:
416 case DRM_FORMAT_ABGR4444:
417 case DRM_FORMAT_XRGB1555:
418 case DRM_FORMAT_XBGR1555:
419 /* No OPQ */
420 break;
421 case DRM_FORMAT_XRGB8888:
422 case DRM_FORMAT_XBGR8888:
423 case DRM_FORMAT_RGB888:
424 case DRM_FORMAT_BGR888:
425 case DRM_FORMAT_RGB565:
426 case DRM_FORMAT_BGR565:
427 case DRM_FORMAT_YUV422:
428 val |= MCDE_OVLXCONF2_OPQ;
429 break;
430 default:
431 dev_err(mcde->dev, "Unknown pixel format 0x%08x\n",
432 format);
433 break;
434 }
435
436 /*
437 * Pixel fetch watermark level is max 0x1FFF pixels.
438 * Two basic rules should be followed:
439 * 1. The value should be at least 256 bits.
440 * 2. The sum of all active overlays pixelfetch watermark level
441 * multiplied with bits per pixel, should be lower than the
442 * size of input_fifo_size in bits.
443 * 3. The value should be a multiple of a line (256 bits).
444 */
445 switch (cpp) {
446 case 2:
447 pixel_fetcher_watermark = 128;
448 break;
449 case 3:
450 pixel_fetcher_watermark = 96;
451 break;
452 case 4:
453 pixel_fetcher_watermark = 48;
454 break;
455 default:
456 pixel_fetcher_watermark = 48;
457 break;
458 }
459 dev_dbg(mcde->dev, "pixel fetcher watermark level %d pixels\n",
460 pixel_fetcher_watermark);
461 val |= pixel_fetcher_watermark << MCDE_OVLXCONF2_PIXELFETCHERWATERMARKLEVEL_SHIFT;
462 writel(val, mcde->regs + conf2);
463
464 /* Number of bytes to fetch per line */
465 writel(mcde->stride, mcde->regs + ljinc);
466 /* No cropping */
467 writel(0, mcde->regs + crop);
468
469 /* Set up overlay control register */
470 val = MCDE_OVLXCR_OVLEN;
471 val |= MCDE_OVLXCR_COLCCTRL_DISABLED;
472 val |= MCDE_OVLXCR_BURSTSIZE_8W <<
473 MCDE_OVLXCR_BURSTSIZE_SHIFT;
474 val |= MCDE_OVLXCR_MAXOUTSTANDING_8_REQ <<
475 MCDE_OVLXCR_MAXOUTSTANDING_SHIFT;
476 /* Not using rotation but set it up anyways */
477 val |= MCDE_OVLXCR_ROTBURSTSIZE_8W <<
478 MCDE_OVLXCR_ROTBURSTSIZE_SHIFT;
479 writel(val, mcde->regs + cr);
480
481 /*
482 * Set up the overlay compositor to route the overlay out to
483 * the desired channel
484 */
485 val = ch << MCDE_OVLXCOMP_CH_ID_SHIFT;
486 writel(val, mcde->regs + comp);
487 }
488
mcde_configure_channel(struct mcde * mcde,enum mcde_channel ch,enum mcde_fifo fifo,const struct drm_display_mode * mode)489 static void mcde_configure_channel(struct mcde *mcde, enum mcde_channel ch,
490 enum mcde_fifo fifo,
491 const struct drm_display_mode *mode)
492 {
493 u32 val;
494 u32 conf;
495 u32 sync;
496 u32 stat;
497 u32 bgcol;
498 u32 mux;
499
500 switch (ch) {
501 case MCDE_CHANNEL_0:
502 conf = MCDE_CHNL0CONF;
503 sync = MCDE_CHNL0SYNCHMOD;
504 stat = MCDE_CHNL0STAT;
505 bgcol = MCDE_CHNL0BCKGNDCOL;
506 mux = MCDE_CHNL0MUXING;
507 break;
508 case MCDE_CHANNEL_1:
509 conf = MCDE_CHNL1CONF;
510 sync = MCDE_CHNL1SYNCHMOD;
511 stat = MCDE_CHNL1STAT;
512 bgcol = MCDE_CHNL1BCKGNDCOL;
513 mux = MCDE_CHNL1MUXING;
514 break;
515 case MCDE_CHANNEL_2:
516 conf = MCDE_CHNL2CONF;
517 sync = MCDE_CHNL2SYNCHMOD;
518 stat = MCDE_CHNL2STAT;
519 bgcol = MCDE_CHNL2BCKGNDCOL;
520 mux = MCDE_CHNL2MUXING;
521 break;
522 case MCDE_CHANNEL_3:
523 conf = MCDE_CHNL3CONF;
524 sync = MCDE_CHNL3SYNCHMOD;
525 stat = MCDE_CHNL3STAT;
526 bgcol = MCDE_CHNL3BCKGNDCOL;
527 mux = MCDE_CHNL3MUXING;
528 return;
529 }
530
531 /* Set up channel 0 sync (based on chnl_update_registers()) */
532 switch (mcde->flow_mode) {
533 case MCDE_COMMAND_ONESHOT_FLOW:
534 /* Oneshot is achieved with software sync */
535 val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SOFTWARE
536 << MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
537 break;
538 case MCDE_COMMAND_TE_FLOW:
539 val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE
540 << MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
541 val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_TE0
542 << MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
543 break;
544 case MCDE_COMMAND_BTA_TE_FLOW:
545 val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE
546 << MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
547 /*
548 * TODO:
549 * The vendor driver uses the formatter as sync source
550 * for BTA TE mode. Test to use TE if you have a panel
551 * that uses this mode.
552 */
553 val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_FORMATTER
554 << MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
555 break;
556 case MCDE_VIDEO_TE_FLOW:
557 val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE
558 << MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
559 val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_TE0
560 << MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
561 break;
562 case MCDE_VIDEO_FORMATTER_FLOW:
563 case MCDE_DPI_FORMATTER_FLOW:
564 val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE
565 << MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT;
566 val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_FORMATTER
567 << MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT;
568 break;
569 default:
570 dev_err(mcde->dev, "unknown flow mode %d\n",
571 mcde->flow_mode);
572 return;
573 }
574
575 writel(val, mcde->regs + sync);
576
577 /* Set up pixels per line and lines per frame */
578 val = (mode->hdisplay - 1) << MCDE_CHNLXCONF_PPL_SHIFT;
579 val |= (mode->vdisplay - 1) << MCDE_CHNLXCONF_LPF_SHIFT;
580 writel(val, mcde->regs + conf);
581
582 /*
583 * Normalize color conversion:
584 * black background, OLED conversion disable on channel
585 */
586 val = MCDE_CHNLXSTAT_CHNLBLBCKGND_EN |
587 MCDE_CHNLXSTAT_CHNLRD;
588 writel(val, mcde->regs + stat);
589 writel(0, mcde->regs + bgcol);
590
591 /* Set up muxing: connect the channel to the desired FIFO */
592 switch (fifo) {
593 case MCDE_FIFO_A:
594 writel(MCDE_CHNLXMUXING_FIFO_ID_FIFO_A,
595 mcde->regs + mux);
596 break;
597 case MCDE_FIFO_B:
598 writel(MCDE_CHNLXMUXING_FIFO_ID_FIFO_B,
599 mcde->regs + mux);
600 break;
601 }
602
603 /*
604 * If using DPI configure the sync event.
605 * TODO: this is for LCD only, it does not cover TV out.
606 */
607 if (mcde->dpi_output) {
608 u32 stripwidth;
609
610 stripwidth = 0xF000 / (mode->vdisplay * 4);
611 dev_info(mcde->dev, "stripwidth: %d\n", stripwidth);
612
613 val = MCDE_SYNCHCONF_HWREQVEVENT_ACTIVE_VIDEO |
614 (mode->hdisplay - 1 - stripwidth) << MCDE_SYNCHCONF_HWREQVCNT_SHIFT |
615 MCDE_SYNCHCONF_SWINTVEVENT_ACTIVE_VIDEO |
616 (mode->hdisplay - 1 - stripwidth) << MCDE_SYNCHCONF_SWINTVCNT_SHIFT;
617
618 switch (fifo) {
619 case MCDE_FIFO_A:
620 writel(val, mcde->regs + MCDE_SYNCHCONFA);
621 break;
622 case MCDE_FIFO_B:
623 writel(val, mcde->regs + MCDE_SYNCHCONFB);
624 break;
625 }
626 }
627 }
628
mcde_configure_fifo(struct mcde * mcde,enum mcde_fifo fifo,enum mcde_formatter fmt,int fifo_wtrmrk)629 static void mcde_configure_fifo(struct mcde *mcde, enum mcde_fifo fifo,
630 enum mcde_formatter fmt,
631 int fifo_wtrmrk)
632 {
633 u32 val;
634 u32 ctrl;
635 u32 cr0, cr1;
636
637 switch (fifo) {
638 case MCDE_FIFO_A:
639 ctrl = MCDE_CTRLA;
640 cr0 = MCDE_CRA0;
641 cr1 = MCDE_CRA1;
642 break;
643 case MCDE_FIFO_B:
644 ctrl = MCDE_CTRLB;
645 cr0 = MCDE_CRB0;
646 cr1 = MCDE_CRB1;
647 break;
648 }
649
650 val = fifo_wtrmrk << MCDE_CTRLX_FIFOWTRMRK_SHIFT;
651
652 /*
653 * Select the formatter to use for this FIFO
654 *
655 * The register definitions imply that different IDs should be used
656 * by the DSI formatters depending on if they are in VID or CMD
657 * mode, and the manual says they are dedicated but identical.
658 * The vendor code uses them as it seems fit.
659 */
660 switch (fmt) {
661 case MCDE_DSI_FORMATTER_0:
662 val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT;
663 val |= MCDE_CTRLX_FORMID_DSI0VID << MCDE_CTRLX_FORMID_SHIFT;
664 break;
665 case MCDE_DSI_FORMATTER_1:
666 val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT;
667 val |= MCDE_CTRLX_FORMID_DSI0CMD << MCDE_CTRLX_FORMID_SHIFT;
668 break;
669 case MCDE_DSI_FORMATTER_2:
670 val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT;
671 val |= MCDE_CTRLX_FORMID_DSI1VID << MCDE_CTRLX_FORMID_SHIFT;
672 break;
673 case MCDE_DSI_FORMATTER_3:
674 val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT;
675 val |= MCDE_CTRLX_FORMID_DSI1CMD << MCDE_CTRLX_FORMID_SHIFT;
676 break;
677 case MCDE_DSI_FORMATTER_4:
678 val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT;
679 val |= MCDE_CTRLX_FORMID_DSI2VID << MCDE_CTRLX_FORMID_SHIFT;
680 break;
681 case MCDE_DSI_FORMATTER_5:
682 val |= MCDE_CTRLX_FORMTYPE_DSI << MCDE_CTRLX_FORMTYPE_SHIFT;
683 val |= MCDE_CTRLX_FORMID_DSI2CMD << MCDE_CTRLX_FORMID_SHIFT;
684 break;
685 case MCDE_DPI_FORMATTER_0:
686 val |= MCDE_CTRLX_FORMTYPE_DPITV << MCDE_CTRLX_FORMTYPE_SHIFT;
687 val |= MCDE_CTRLX_FORMID_DPIA << MCDE_CTRLX_FORMID_SHIFT;
688 break;
689 case MCDE_DPI_FORMATTER_1:
690 val |= MCDE_CTRLX_FORMTYPE_DPITV << MCDE_CTRLX_FORMTYPE_SHIFT;
691 val |= MCDE_CTRLX_FORMID_DPIB << MCDE_CTRLX_FORMID_SHIFT;
692 break;
693 }
694 writel(val, mcde->regs + ctrl);
695
696 /* Blend source with Alpha 0xff on FIFO */
697 val = MCDE_CRX0_BLENDEN |
698 0xff << MCDE_CRX0_ALPHABLEND_SHIFT;
699 writel(val, mcde->regs + cr0);
700
701 spin_lock(&mcde->fifo_crx1_lock);
702 val = readl(mcde->regs + cr1);
703 /*
704 * Set-up from mcde_fmtr_dsi.c, fmtr_dsi_enable_video()
705 * FIXME: a different clock needs to be selected for TV out.
706 */
707 if (mcde->dpi_output) {
708 struct drm_connector *connector = drm_panel_bridge_connector(mcde->bridge);
709 u32 bus_format;
710
711 /* Assume RGB888 24 bit if we have no further info */
712 if (!connector->display_info.num_bus_formats) {
713 dev_info(mcde->dev, "panel does not specify bus format, assume RGB888\n");
714 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
715 } else {
716 bus_format = connector->display_info.bus_formats[0];
717 }
718
719 /*
720 * Set up the CDWIN and OUTBPP for the LCD
721 *
722 * FIXME: fill this in if you know the correspondance between the MIPI
723 * DPI specification and the media bus formats.
724 */
725 val &= ~MCDE_CRX1_CDWIN_MASK;
726 val &= ~MCDE_CRX1_OUTBPP_MASK;
727 switch (bus_format) {
728 case MEDIA_BUS_FMT_RGB888_1X24:
729 val |= MCDE_CRX1_CDWIN_24BPP << MCDE_CRX1_CDWIN_SHIFT;
730 val |= MCDE_CRX1_OUTBPP_24BPP << MCDE_CRX1_OUTBPP_SHIFT;
731 break;
732 default:
733 dev_err(mcde->dev, "unknown bus format, assume RGB888\n");
734 val |= MCDE_CRX1_CDWIN_24BPP << MCDE_CRX1_CDWIN_SHIFT;
735 val |= MCDE_CRX1_OUTBPP_24BPP << MCDE_CRX1_OUTBPP_SHIFT;
736 break;
737 }
738 } else {
739 /* Use the MCDE clock for DSI */
740 val &= ~MCDE_CRX1_CLKSEL_MASK;
741 val |= MCDE_CRX1_CLKSEL_MCDECLK << MCDE_CRX1_CLKSEL_SHIFT;
742 }
743 writel(val, mcde->regs + cr1);
744 spin_unlock(&mcde->fifo_crx1_lock);
745 };
746
mcde_configure_dsi_formatter(struct mcde * mcde,enum mcde_formatter fmt,u32 formatter_frame,int pkt_size)747 static void mcde_configure_dsi_formatter(struct mcde *mcde,
748 enum mcde_formatter fmt,
749 u32 formatter_frame,
750 int pkt_size)
751 {
752 u32 val;
753 u32 conf0;
754 u32 frame;
755 u32 pkt;
756 u32 sync;
757 u32 cmdw;
758 u32 delay0, delay1;
759
760 switch (fmt) {
761 case MCDE_DSI_FORMATTER_0:
762 conf0 = MCDE_DSIVID0CONF0;
763 frame = MCDE_DSIVID0FRAME;
764 pkt = MCDE_DSIVID0PKT;
765 sync = MCDE_DSIVID0SYNC;
766 cmdw = MCDE_DSIVID0CMDW;
767 delay0 = MCDE_DSIVID0DELAY0;
768 delay1 = MCDE_DSIVID0DELAY1;
769 break;
770 case MCDE_DSI_FORMATTER_1:
771 conf0 = MCDE_DSIVID1CONF0;
772 frame = MCDE_DSIVID1FRAME;
773 pkt = MCDE_DSIVID1PKT;
774 sync = MCDE_DSIVID1SYNC;
775 cmdw = MCDE_DSIVID1CMDW;
776 delay0 = MCDE_DSIVID1DELAY0;
777 delay1 = MCDE_DSIVID1DELAY1;
778 break;
779 case MCDE_DSI_FORMATTER_2:
780 conf0 = MCDE_DSIVID2CONF0;
781 frame = MCDE_DSIVID2FRAME;
782 pkt = MCDE_DSIVID2PKT;
783 sync = MCDE_DSIVID2SYNC;
784 cmdw = MCDE_DSIVID2CMDW;
785 delay0 = MCDE_DSIVID2DELAY0;
786 delay1 = MCDE_DSIVID2DELAY1;
787 break;
788 default:
789 dev_err(mcde->dev, "tried to configure a non-DSI formatter as DSI\n");
790 return;
791 }
792
793 /*
794 * Enable formatter
795 * 8 bit commands and DCS commands (notgen = not generic)
796 */
797 val = MCDE_DSICONF0_CMD8 | MCDE_DSICONF0_DCSVID_NOTGEN;
798 if (mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO)
799 val |= MCDE_DSICONF0_VID_MODE_VID;
800 switch (mcde->mdsi->format) {
801 case MIPI_DSI_FMT_RGB888:
802 val |= MCDE_DSICONF0_PACKING_RGB888 <<
803 MCDE_DSICONF0_PACKING_SHIFT;
804 break;
805 case MIPI_DSI_FMT_RGB666:
806 val |= MCDE_DSICONF0_PACKING_RGB666 <<
807 MCDE_DSICONF0_PACKING_SHIFT;
808 break;
809 case MIPI_DSI_FMT_RGB666_PACKED:
810 dev_err(mcde->dev,
811 "we cannot handle the packed RGB666 format\n");
812 val |= MCDE_DSICONF0_PACKING_RGB666 <<
813 MCDE_DSICONF0_PACKING_SHIFT;
814 break;
815 case MIPI_DSI_FMT_RGB565:
816 val |= MCDE_DSICONF0_PACKING_RGB565 <<
817 MCDE_DSICONF0_PACKING_SHIFT;
818 break;
819 default:
820 dev_err(mcde->dev, "unknown DSI format\n");
821 return;
822 }
823 writel(val, mcde->regs + conf0);
824
825 writel(formatter_frame, mcde->regs + frame);
826 writel(pkt_size, mcde->regs + pkt);
827 writel(0, mcde->regs + sync);
828 /* Define the MIPI command: we want to write into display memory */
829 val = MIPI_DCS_WRITE_MEMORY_CONTINUE <<
830 MCDE_DSIVIDXCMDW_CMDW_CONTINUE_SHIFT;
831 val |= MIPI_DCS_WRITE_MEMORY_START <<
832 MCDE_DSIVIDXCMDW_CMDW_START_SHIFT;
833 writel(val, mcde->regs + cmdw);
834
835 /*
836 * FIXME: the vendor driver has some hack around this value in
837 * CMD mode with autotrig.
838 */
839 writel(0, mcde->regs + delay0);
840 writel(0, mcde->regs + delay1);
841 }
842
mcde_enable_fifo(struct mcde * mcde,enum mcde_fifo fifo)843 static void mcde_enable_fifo(struct mcde *mcde, enum mcde_fifo fifo)
844 {
845 u32 val;
846 u32 cr;
847
848 switch (fifo) {
849 case MCDE_FIFO_A:
850 cr = MCDE_CRA0;
851 break;
852 case MCDE_FIFO_B:
853 cr = MCDE_CRB0;
854 break;
855 default:
856 dev_err(mcde->dev, "cannot enable FIFO %c\n",
857 'A' + fifo);
858 return;
859 }
860
861 spin_lock(&mcde->flow_lock);
862 val = readl(mcde->regs + cr);
863 val |= MCDE_CRX0_FLOEN;
864 writel(val, mcde->regs + cr);
865 mcde->flow_active++;
866 spin_unlock(&mcde->flow_lock);
867 }
868
mcde_disable_fifo(struct mcde * mcde,enum mcde_fifo fifo,bool wait_for_drain)869 static void mcde_disable_fifo(struct mcde *mcde, enum mcde_fifo fifo,
870 bool wait_for_drain)
871 {
872 int timeout = 100;
873 u32 val;
874 u32 cr;
875
876 switch (fifo) {
877 case MCDE_FIFO_A:
878 cr = MCDE_CRA0;
879 break;
880 case MCDE_FIFO_B:
881 cr = MCDE_CRB0;
882 break;
883 default:
884 dev_err(mcde->dev, "cannot disable FIFO %c\n",
885 'A' + fifo);
886 return;
887 }
888
889 spin_lock(&mcde->flow_lock);
890 val = readl(mcde->regs + cr);
891 val &= ~MCDE_CRX0_FLOEN;
892 writel(val, mcde->regs + cr);
893 mcde->flow_active = 0;
894 spin_unlock(&mcde->flow_lock);
895
896 if (!wait_for_drain)
897 return;
898
899 /* Check that we really drained and stopped the flow */
900 while (readl(mcde->regs + cr) & MCDE_CRX0_FLOEN) {
901 usleep_range(1000, 1500);
902 if (!--timeout) {
903 dev_err(mcde->dev,
904 "FIFO timeout while clearing FIFO %c\n",
905 'A' + fifo);
906 return;
907 }
908 }
909 }
910
911 /*
912 * This drains a pipe i.e. a FIFO connected to a certain channel
913 */
mcde_drain_pipe(struct mcde * mcde,enum mcde_fifo fifo,enum mcde_channel ch)914 static void mcde_drain_pipe(struct mcde *mcde, enum mcde_fifo fifo,
915 enum mcde_channel ch)
916 {
917 u32 val;
918 u32 ctrl;
919 u32 synsw;
920
921 switch (fifo) {
922 case MCDE_FIFO_A:
923 ctrl = MCDE_CTRLA;
924 break;
925 case MCDE_FIFO_B:
926 ctrl = MCDE_CTRLB;
927 break;
928 }
929
930 switch (ch) {
931 case MCDE_CHANNEL_0:
932 synsw = MCDE_CHNL0SYNCHSW;
933 break;
934 case MCDE_CHANNEL_1:
935 synsw = MCDE_CHNL1SYNCHSW;
936 break;
937 case MCDE_CHANNEL_2:
938 synsw = MCDE_CHNL2SYNCHSW;
939 break;
940 case MCDE_CHANNEL_3:
941 synsw = MCDE_CHNL3SYNCHSW;
942 return;
943 }
944
945 val = readl(mcde->regs + ctrl);
946 if (!(val & MCDE_CTRLX_FIFOEMPTY)) {
947 dev_err(mcde->dev, "Channel A FIFO not empty (handover)\n");
948 /* Attempt to clear the FIFO */
949 mcde_enable_fifo(mcde, fifo);
950 /* Trigger a software sync out on respective channel (0-3) */
951 writel(MCDE_CHNLXSYNCHSW_SW_TRIG, mcde->regs + synsw);
952 /* Disable FIFO A flow again */
953 mcde_disable_fifo(mcde, fifo, true);
954 }
955 }
956
mcde_dsi_get_pkt_div(int ppl,int fifo_size)957 static int mcde_dsi_get_pkt_div(int ppl, int fifo_size)
958 {
959 /*
960 * DSI command mode line packets should be split into an even number of
961 * packets smaller than or equal to the fifo size.
962 */
963 int div;
964 const int max_div = DIV_ROUND_UP(MCDE_MAX_WIDTH, fifo_size);
965
966 for (div = 1; div < max_div; div++)
967 if (ppl % div == 0 && ppl / div <= fifo_size)
968 return div;
969 return 1;
970 }
971
mcde_setup_dpi(struct mcde * mcde,const struct drm_display_mode * mode,int * fifo_wtrmrk_lvl)972 static void mcde_setup_dpi(struct mcde *mcde, const struct drm_display_mode *mode,
973 int *fifo_wtrmrk_lvl)
974 {
975 struct drm_connector *connector = drm_panel_bridge_connector(mcde->bridge);
976 u32 hsw, hfp, hbp;
977 u32 vsw, vfp, vbp;
978 u32 val;
979
980 /* FIXME: we only support LCD, implement TV out */
981 hsw = mode->hsync_end - mode->hsync_start;
982 hfp = mode->hsync_start - mode->hdisplay;
983 hbp = mode->htotal - mode->hsync_end;
984 vsw = mode->vsync_end - mode->vsync_start;
985 vfp = mode->vsync_start - mode->vdisplay;
986 vbp = mode->vtotal - mode->vsync_end;
987
988 dev_info(mcde->dev, "output on DPI LCD from channel A\n");
989 /* Display actual values */
990 dev_info(mcde->dev, "HSW: %d, HFP: %d, HBP: %d, VSW: %d, VFP: %d, VBP: %d\n",
991 hsw, hfp, hbp, vsw, vfp, vbp);
992
993 /*
994 * The pixel fetcher is 128 64-bit words deep = 1024 bytes.
995 * One overlay of 32bpp (4 cpp) assumed, fetch 160 pixels.
996 * 160 * 4 = 640 bytes.
997 */
998 *fifo_wtrmrk_lvl = 640;
999
1000 /* Set up the main control, watermark level at 7 */
1001 val = 7 << MCDE_CONF0_IFIFOCTRLWTRMRKLVL_SHIFT;
1002
1003 /*
1004 * This sets up the internal silicon muxing of the DPI
1005 * lines. This is how the silicon connects out to the
1006 * external pins, then the pins need to be further
1007 * configured into "alternate functions" using pin control
1008 * to actually get the signals out.
1009 *
1010 * FIXME: this is hardcoded to the only setting found in
1011 * the wild. If we need to use different settings for
1012 * different DPI displays, make this parameterizable from
1013 * the device tree.
1014 */
1015 /* 24 bits DPI: connect Ch A LSB to D[0:7] */
1016 val |= 0 << MCDE_CONF0_OUTMUX0_SHIFT;
1017 /* 24 bits DPI: connect Ch A MID to D[8:15] */
1018 val |= 1 << MCDE_CONF0_OUTMUX1_SHIFT;
1019 /* Don't care about this muxing */
1020 val |= 0 << MCDE_CONF0_OUTMUX2_SHIFT;
1021 /* Don't care about this muxing */
1022 val |= 0 << MCDE_CONF0_OUTMUX3_SHIFT;
1023 /* 24 bits DPI: connect Ch A MSB to D[32:39] */
1024 val |= 2 << MCDE_CONF0_OUTMUX4_SHIFT;
1025 /* Syncmux bits zero: DPI channel A */
1026 writel(val, mcde->regs + MCDE_CONF0);
1027
1028 /* This hammers us into LCD mode */
1029 writel(0, mcde->regs + MCDE_TVCRA);
1030
1031 /* Front porch and sync width */
1032 val = (vsw << MCDE_TVBL1_BEL1_SHIFT);
1033 val |= (vfp << MCDE_TVBL1_BSL1_SHIFT);
1034 writel(val, mcde->regs + MCDE_TVBL1A);
1035 /* The vendor driver sets the same value into TVBL2A */
1036 writel(val, mcde->regs + MCDE_TVBL2A);
1037
1038 /* Vertical back porch */
1039 val = (vbp << MCDE_TVDVO_DVO1_SHIFT);
1040 /* The vendor drivers sets the same value into TVDVOA */
1041 val |= (vbp << MCDE_TVDVO_DVO2_SHIFT);
1042 writel(val, mcde->regs + MCDE_TVDVOA);
1043
1044 /* Horizontal back porch, as 0 = 1 cycle we need to subtract 1 */
1045 writel((hbp - 1), mcde->regs + MCDE_TVTIM1A);
1046
1047 /* Horizongal sync width and horizonal front porch, 0 = 1 cycle */
1048 val = ((hsw - 1) << MCDE_TVLBALW_LBW_SHIFT);
1049 val |= ((hfp - 1) << MCDE_TVLBALW_ALW_SHIFT);
1050 writel(val, mcde->regs + MCDE_TVLBALWA);
1051
1052 /* Blank some TV registers we don't use */
1053 writel(0, mcde->regs + MCDE_TVISLA);
1054 writel(0, mcde->regs + MCDE_TVBLUA);
1055
1056 /* Set up sync inversion etc */
1057 val = 0;
1058 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
1059 val |= MCDE_LCDTIM1B_IHS;
1060 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
1061 val |= MCDE_LCDTIM1B_IVS;
1062 if (connector->display_info.bus_flags & DRM_BUS_FLAG_DE_LOW)
1063 val |= MCDE_LCDTIM1B_IOE;
1064 if (connector->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
1065 val |= MCDE_LCDTIM1B_IPC;
1066 writel(val, mcde->regs + MCDE_LCDTIM1A);
1067 }
1068
mcde_setup_dsi(struct mcde * mcde,const struct drm_display_mode * mode,int cpp,int * fifo_wtrmrk_lvl,int * dsi_formatter_frame,int * dsi_pkt_size)1069 static void mcde_setup_dsi(struct mcde *mcde, const struct drm_display_mode *mode,
1070 int cpp, int *fifo_wtrmrk_lvl, int *dsi_formatter_frame,
1071 int *dsi_pkt_size)
1072 {
1073 u32 formatter_ppl = mode->hdisplay; /* pixels per line */
1074 u32 formatter_lpf = mode->vdisplay; /* lines per frame */
1075 int formatter_frame;
1076 int formatter_cpp;
1077 int fifo_wtrmrk;
1078 u32 pkt_div;
1079 int pkt_size;
1080 u32 val;
1081
1082 dev_info(mcde->dev, "output in %s mode, format %dbpp\n",
1083 (mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) ?
1084 "VIDEO" : "CMD",
1085 mipi_dsi_pixel_format_to_bpp(mcde->mdsi->format));
1086 formatter_cpp =
1087 mipi_dsi_pixel_format_to_bpp(mcde->mdsi->format) / 8;
1088 dev_info(mcde->dev, "Overlay CPP: %d bytes, DSI formatter CPP %d bytes\n",
1089 cpp, formatter_cpp);
1090
1091 /* Set up the main control, watermark level at 7 */
1092 val = 7 << MCDE_CONF0_IFIFOCTRLWTRMRKLVL_SHIFT;
1093
1094 /*
1095 * This is the internal silicon muxing of the DPI
1096 * (parallell display) lines. Since we are not using
1097 * this at all (we are using DSI) these are just
1098 * dummy values from the vendor tree.
1099 */
1100 val |= 3 << MCDE_CONF0_OUTMUX0_SHIFT;
1101 val |= 3 << MCDE_CONF0_OUTMUX1_SHIFT;
1102 val |= 0 << MCDE_CONF0_OUTMUX2_SHIFT;
1103 val |= 4 << MCDE_CONF0_OUTMUX3_SHIFT;
1104 val |= 5 << MCDE_CONF0_OUTMUX4_SHIFT;
1105 writel(val, mcde->regs + MCDE_CONF0);
1106
1107 /* Calculations from mcde_fmtr_dsi.c, fmtr_dsi_enable_video() */
1108
1109 /*
1110 * Set up FIFO A watermark level:
1111 * 128 for LCD 32bpp video mode
1112 * 48 for LCD 32bpp command mode
1113 * 128 for LCD 16bpp video mode
1114 * 64 for LCD 16bpp command mode
1115 * 128 for HDMI 32bpp
1116 * 192 for HDMI 16bpp
1117 */
1118 fifo_wtrmrk = mode->hdisplay;
1119 if (mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
1120 fifo_wtrmrk = min(fifo_wtrmrk, 128);
1121 pkt_div = 1;
1122 } else {
1123 fifo_wtrmrk = min(fifo_wtrmrk, 48);
1124 /* The FIFO is 640 entries deep on this v3 hardware */
1125 pkt_div = mcde_dsi_get_pkt_div(mode->hdisplay, 640);
1126 }
1127 dev_dbg(mcde->dev, "FIFO watermark after flooring: %d bytes\n",
1128 fifo_wtrmrk);
1129 dev_dbg(mcde->dev, "Packet divisor: %d bytes\n", pkt_div);
1130
1131 /* NOTE: pkt_div is 1 for video mode */
1132 pkt_size = (formatter_ppl * formatter_cpp) / pkt_div;
1133 /* Commands CMD8 need one extra byte */
1134 if (!(mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO))
1135 pkt_size++;
1136
1137 dev_dbg(mcde->dev, "DSI packet size: %d * %d bytes per line\n",
1138 pkt_size, pkt_div);
1139 dev_dbg(mcde->dev, "Overlay frame size: %u bytes\n",
1140 mode->hdisplay * mode->vdisplay * cpp);
1141 /* NOTE: pkt_div is 1 for video mode */
1142 formatter_frame = pkt_size * pkt_div * formatter_lpf;
1143 dev_dbg(mcde->dev, "Formatter frame size: %u bytes\n", formatter_frame);
1144
1145 *fifo_wtrmrk_lvl = fifo_wtrmrk;
1146 *dsi_pkt_size = pkt_size;
1147 *dsi_formatter_frame = formatter_frame;
1148 }
1149
mcde_display_enable(struct drm_simple_display_pipe * pipe,struct drm_crtc_state * cstate,struct drm_plane_state * plane_state)1150 static void mcde_display_enable(struct drm_simple_display_pipe *pipe,
1151 struct drm_crtc_state *cstate,
1152 struct drm_plane_state *plane_state)
1153 {
1154 struct drm_crtc *crtc = &pipe->crtc;
1155 struct drm_plane *plane = &pipe->plane;
1156 struct drm_device *drm = crtc->dev;
1157 struct mcde *mcde = to_mcde(drm);
1158 const struct drm_display_mode *mode = &cstate->mode;
1159 struct drm_framebuffer *fb = plane->state->fb;
1160 u32 format = fb->format->format;
1161 int dsi_pkt_size;
1162 int fifo_wtrmrk;
1163 int cpp = fb->format->cpp[0];
1164 u32 dsi_formatter_frame;
1165 u32 val;
1166 int ret;
1167
1168 /* This powers up the entire MCDE block and the DSI hardware */
1169 ret = regulator_enable(mcde->epod);
1170 if (ret) {
1171 dev_err(drm->dev, "can't re-enable EPOD regulator\n");
1172 return;
1173 }
1174
1175 dev_info(drm->dev, "enable MCDE, %d x %d format %p4cc\n",
1176 mode->hdisplay, mode->vdisplay, &format);
1177
1178
1179 /* Clear any pending interrupts */
1180 mcde_display_disable_irqs(mcde);
1181 writel(0, mcde->regs + MCDE_IMSCERR);
1182 writel(0xFFFFFFFF, mcde->regs + MCDE_RISERR);
1183
1184 if (mcde->dpi_output)
1185 mcde_setup_dpi(mcde, mode, &fifo_wtrmrk);
1186 else
1187 mcde_setup_dsi(mcde, mode, cpp, &fifo_wtrmrk,
1188 &dsi_formatter_frame, &dsi_pkt_size);
1189
1190 mcde->stride = mode->hdisplay * cpp;
1191 dev_dbg(drm->dev, "Overlay line stride: %u bytes\n",
1192 mcde->stride);
1193
1194 /* Drain the FIFO A + channel 0 pipe so we have a clean slate */
1195 mcde_drain_pipe(mcde, MCDE_FIFO_A, MCDE_CHANNEL_0);
1196
1197 /*
1198 * We set up our display pipeline:
1199 * EXTSRC 0 -> OVERLAY 0 -> CHANNEL 0 -> FIFO A -> DSI FORMATTER 0
1200 *
1201 * First configure the external source (memory) on external source 0
1202 * using the desired bitstream/bitmap format
1203 */
1204 mcde_configure_extsrc(mcde, MCDE_EXTSRC_0, format);
1205
1206 /*
1207 * Configure overlay 0 according to format and mode and take input
1208 * from external source 0 and route the output of this overlay to
1209 * channel 0
1210 */
1211 mcde_configure_overlay(mcde, MCDE_OVERLAY_0, MCDE_EXTSRC_0,
1212 MCDE_CHANNEL_0, mode, format, cpp);
1213
1214 /*
1215 * Configure pixel-per-line and line-per-frame for channel 0 and then
1216 * route channel 0 to FIFO A
1217 */
1218 mcde_configure_channel(mcde, MCDE_CHANNEL_0, MCDE_FIFO_A, mode);
1219
1220 if (mcde->dpi_output) {
1221 unsigned long lcd_freq;
1222
1223 /* Configure FIFO A to use DPI formatter 0 */
1224 mcde_configure_fifo(mcde, MCDE_FIFO_A, MCDE_DPI_FORMATTER_0,
1225 fifo_wtrmrk);
1226
1227 /* Set up and enable the LCD clock */
1228 lcd_freq = clk_round_rate(mcde->fifoa_clk, mode->clock * 1000);
1229 ret = clk_set_rate(mcde->fifoa_clk, lcd_freq);
1230 if (ret)
1231 dev_err(mcde->dev, "failed to set LCD clock rate %lu Hz\n",
1232 lcd_freq);
1233 ret = clk_prepare_enable(mcde->fifoa_clk);
1234 if (ret) {
1235 dev_err(mcde->dev, "failed to enable FIFO A DPI clock\n");
1236 return;
1237 }
1238 dev_info(mcde->dev, "LCD FIFO A clk rate %lu Hz\n",
1239 clk_get_rate(mcde->fifoa_clk));
1240 } else {
1241 /* Configure FIFO A to use DSI formatter 0 */
1242 mcde_configure_fifo(mcde, MCDE_FIFO_A, MCDE_DSI_FORMATTER_0,
1243 fifo_wtrmrk);
1244
1245 /*
1246 * This brings up the DSI bridge which is tightly connected
1247 * to the MCDE DSI formatter.
1248 */
1249 mcde_dsi_enable(mcde->bridge);
1250
1251 /* Configure the DSI formatter 0 for the DSI panel output */
1252 mcde_configure_dsi_formatter(mcde, MCDE_DSI_FORMATTER_0,
1253 dsi_formatter_frame, dsi_pkt_size);
1254 }
1255
1256 switch (mcde->flow_mode) {
1257 case MCDE_COMMAND_TE_FLOW:
1258 case MCDE_COMMAND_BTA_TE_FLOW:
1259 case MCDE_VIDEO_TE_FLOW:
1260 /* We are using TE in some combination */
1261 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
1262 val = MCDE_VSCRC_VSPOL;
1263 else
1264 val = 0;
1265 writel(val, mcde->regs + MCDE_VSCRC0);
1266 /* Enable VSYNC capture on TE0 */
1267 val = readl(mcde->regs + MCDE_CRC);
1268 val |= MCDE_CRC_SYCEN0;
1269 writel(val, mcde->regs + MCDE_CRC);
1270 break;
1271 default:
1272 /* No TE capture */
1273 break;
1274 }
1275
1276 drm_crtc_vblank_on(crtc);
1277
1278 /*
1279 * If we're using oneshot mode we don't start the flow
1280 * until each time the display is given an update, and
1281 * then we disable it immediately after. For all other
1282 * modes (command or video) we start the FIFO flow
1283 * right here. This is necessary for the hardware to
1284 * behave right.
1285 */
1286 if (mcde->flow_mode != MCDE_COMMAND_ONESHOT_FLOW) {
1287 mcde_enable_fifo(mcde, MCDE_FIFO_A);
1288 dev_dbg(mcde->dev, "started MCDE video FIFO flow\n");
1289 }
1290
1291 /* Enable MCDE with automatic clock gating */
1292 val = readl(mcde->regs + MCDE_CR);
1293 val |= MCDE_CR_MCDEEN | MCDE_CR_AUTOCLKG_EN;
1294 writel(val, mcde->regs + MCDE_CR);
1295
1296 dev_info(drm->dev, "MCDE display is enabled\n");
1297 }
1298
mcde_display_disable(struct drm_simple_display_pipe * pipe)1299 static void mcde_display_disable(struct drm_simple_display_pipe *pipe)
1300 {
1301 struct drm_crtc *crtc = &pipe->crtc;
1302 struct drm_device *drm = crtc->dev;
1303 struct mcde *mcde = to_mcde(drm);
1304 struct drm_pending_vblank_event *event;
1305 int ret;
1306
1307 drm_crtc_vblank_off(crtc);
1308
1309 /* Disable FIFO A flow */
1310 mcde_disable_fifo(mcde, MCDE_FIFO_A, true);
1311
1312 if (mcde->dpi_output) {
1313 clk_disable_unprepare(mcde->fifoa_clk);
1314 } else {
1315 /* This disables the DSI bridge */
1316 mcde_dsi_disable(mcde->bridge);
1317 }
1318
1319 event = crtc->state->event;
1320 if (event) {
1321 crtc->state->event = NULL;
1322
1323 spin_lock_irq(&crtc->dev->event_lock);
1324 drm_crtc_send_vblank_event(crtc, event);
1325 spin_unlock_irq(&crtc->dev->event_lock);
1326 }
1327
1328 ret = regulator_disable(mcde->epod);
1329 if (ret)
1330 dev_err(drm->dev, "can't disable EPOD regulator\n");
1331 /* Make sure we are powered down (before we may power up again) */
1332 usleep_range(50000, 70000);
1333
1334 dev_info(drm->dev, "MCDE display is disabled\n");
1335 }
1336
mcde_start_flow(struct mcde * mcde)1337 static void mcde_start_flow(struct mcde *mcde)
1338 {
1339 /* Request a TE ACK only in TE+BTA mode */
1340 if (mcde->flow_mode == MCDE_COMMAND_BTA_TE_FLOW)
1341 mcde_dsi_te_request(mcde->mdsi);
1342
1343 /* Enable FIFO A flow */
1344 mcde_enable_fifo(mcde, MCDE_FIFO_A);
1345
1346 /*
1347 * If oneshot mode is enabled, the flow will be disabled
1348 * when the TE0 IRQ arrives in the interrupt handler. Otherwise
1349 * updates are continuously streamed to the display after this
1350 * point.
1351 */
1352
1353 if (mcde->flow_mode == MCDE_COMMAND_ONESHOT_FLOW) {
1354 /* Trigger a software sync out on channel 0 */
1355 writel(MCDE_CHNLXSYNCHSW_SW_TRIG,
1356 mcde->regs + MCDE_CHNL0SYNCHSW);
1357
1358 /*
1359 * Disable FIFO A flow again: since we are using TE sync we
1360 * need to wait for the FIFO to drain before we continue
1361 * so repeated calls to this function will not cause a mess
1362 * in the hardware by pushing updates will updates are going
1363 * on already.
1364 */
1365 mcde_disable_fifo(mcde, MCDE_FIFO_A, true);
1366 }
1367
1368 dev_dbg(mcde->dev, "started MCDE FIFO flow\n");
1369 }
1370
mcde_set_extsrc(struct mcde * mcde,u32 buffer_address)1371 static void mcde_set_extsrc(struct mcde *mcde, u32 buffer_address)
1372 {
1373 /* Write bitmap base address to register */
1374 writel(buffer_address, mcde->regs + MCDE_EXTSRCXA0);
1375 /*
1376 * Base address for next line this is probably only used
1377 * in interlace modes.
1378 */
1379 writel(buffer_address + mcde->stride, mcde->regs + MCDE_EXTSRCXA1);
1380 }
1381
mcde_display_update(struct drm_simple_display_pipe * pipe,struct drm_plane_state * old_pstate)1382 static void mcde_display_update(struct drm_simple_display_pipe *pipe,
1383 struct drm_plane_state *old_pstate)
1384 {
1385 struct drm_crtc *crtc = &pipe->crtc;
1386 struct drm_device *drm = crtc->dev;
1387 struct mcde *mcde = to_mcde(drm);
1388 struct drm_pending_vblank_event *event = crtc->state->event;
1389 struct drm_plane *plane = &pipe->plane;
1390 struct drm_plane_state *pstate = plane->state;
1391 struct drm_framebuffer *fb = pstate->fb;
1392
1393 /*
1394 * Handle any pending event first, we need to arm the vblank
1395 * interrupt before sending any update to the display so we don't
1396 * miss the interrupt.
1397 */
1398 if (event) {
1399 crtc->state->event = NULL;
1400
1401 spin_lock_irq(&crtc->dev->event_lock);
1402 /*
1403 * Hardware must be on before we can arm any vblank event,
1404 * this is not a scanout controller where there is always
1405 * some periodic update going on, it is completely frozen
1406 * until we get an update. If MCDE output isn't yet enabled,
1407 * we just send a vblank dummy event back.
1408 */
1409 if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0) {
1410 dev_dbg(mcde->dev, "arm vblank event\n");
1411 drm_crtc_arm_vblank_event(crtc, event);
1412 } else {
1413 dev_dbg(mcde->dev, "insert fake vblank event\n");
1414 drm_crtc_send_vblank_event(crtc, event);
1415 }
1416
1417 spin_unlock_irq(&crtc->dev->event_lock);
1418 }
1419
1420 /*
1421 * We do not start sending framebuffer updates before the
1422 * display is enabled. Update events will however be dispatched
1423 * from the DRM core before the display is enabled.
1424 */
1425 if (fb) {
1426 mcde_set_extsrc(mcde, drm_fb_cma_get_gem_addr(fb, pstate, 0));
1427 dev_info_once(mcde->dev, "first update of display contents\n");
1428 /*
1429 * Usually the flow is already active, unless we are in
1430 * oneshot mode, then we need to kick the flow right here.
1431 */
1432 if (mcde->flow_active == 0)
1433 mcde_start_flow(mcde);
1434 } else {
1435 /*
1436 * If an update is receieved before the MCDE is enabled
1437 * (before mcde_display_enable() is called) we can't really
1438 * do much with that buffer.
1439 */
1440 dev_info(mcde->dev, "ignored a display update\n");
1441 }
1442 }
1443
mcde_display_enable_vblank(struct drm_simple_display_pipe * pipe)1444 static int mcde_display_enable_vblank(struct drm_simple_display_pipe *pipe)
1445 {
1446 struct drm_crtc *crtc = &pipe->crtc;
1447 struct drm_device *drm = crtc->dev;
1448 struct mcde *mcde = to_mcde(drm);
1449 u32 val;
1450
1451 /* Enable all VBLANK IRQs */
1452 val = MCDE_PP_VCMPA |
1453 MCDE_PP_VCMPB |
1454 MCDE_PP_VSCC0 |
1455 MCDE_PP_VSCC1 |
1456 MCDE_PP_VCMPC0 |
1457 MCDE_PP_VCMPC1;
1458 writel(val, mcde->regs + MCDE_IMSCPP);
1459
1460 return 0;
1461 }
1462
mcde_display_disable_vblank(struct drm_simple_display_pipe * pipe)1463 static void mcde_display_disable_vblank(struct drm_simple_display_pipe *pipe)
1464 {
1465 struct drm_crtc *crtc = &pipe->crtc;
1466 struct drm_device *drm = crtc->dev;
1467 struct mcde *mcde = to_mcde(drm);
1468
1469 /* Disable all VBLANK IRQs */
1470 writel(0, mcde->regs + MCDE_IMSCPP);
1471 /* Clear any pending IRQs */
1472 writel(0xFFFFFFFF, mcde->regs + MCDE_RISPP);
1473 }
1474
1475 static struct drm_simple_display_pipe_funcs mcde_display_funcs = {
1476 .check = mcde_display_check,
1477 .enable = mcde_display_enable,
1478 .disable = mcde_display_disable,
1479 .update = mcde_display_update,
1480 .enable_vblank = mcde_display_enable_vblank,
1481 .disable_vblank = mcde_display_disable_vblank,
1482 };
1483
mcde_display_init(struct drm_device * drm)1484 int mcde_display_init(struct drm_device *drm)
1485 {
1486 struct mcde *mcde = to_mcde(drm);
1487 int ret;
1488 static const u32 formats[] = {
1489 DRM_FORMAT_ARGB8888,
1490 DRM_FORMAT_ABGR8888,
1491 DRM_FORMAT_XRGB8888,
1492 DRM_FORMAT_XBGR8888,
1493 DRM_FORMAT_RGB888,
1494 DRM_FORMAT_BGR888,
1495 DRM_FORMAT_ARGB4444,
1496 DRM_FORMAT_ABGR4444,
1497 DRM_FORMAT_XRGB4444,
1498 DRM_FORMAT_XBGR4444,
1499 /* These are actually IRGB1555 so intensity bit is lost */
1500 DRM_FORMAT_XRGB1555,
1501 DRM_FORMAT_XBGR1555,
1502 DRM_FORMAT_RGB565,
1503 DRM_FORMAT_BGR565,
1504 DRM_FORMAT_YUV422,
1505 };
1506
1507 ret = mcde_init_clock_divider(mcde);
1508 if (ret)
1509 return ret;
1510
1511 ret = drm_simple_display_pipe_init(drm, &mcde->pipe,
1512 &mcde_display_funcs,
1513 formats, ARRAY_SIZE(formats),
1514 NULL,
1515 mcde->connector);
1516 if (ret)
1517 return ret;
1518
1519 return 0;
1520 }
1521 EXPORT_SYMBOL_GPL(mcde_display_init);
1522