1 /*
2 * Miscellaneous Mac68K-specific stuff
3 */
4
5 #include <linux/types.h>
6 #include <linux/errno.h>
7 #include <linux/miscdevice.h>
8 #include <linux/kernel.h>
9 #include <linux/delay.h>
10 #include <linux/sched.h>
11 #include <linux/time.h>
12 #include <linux/rtc.h>
13 #include <linux/mm.h>
14
15 #include <linux/adb.h>
16 #include <linux/cuda.h>
17 #include <linux/pmu.h>
18
19 #include <asm/uaccess.h>
20 #include <asm/io.h>
21 #include <asm/rtc.h>
22 #include <asm/system.h>
23 #include <asm/segment.h>
24 #include <asm/setup.h>
25 #include <asm/macintosh.h>
26 #include <asm/mac_via.h>
27 #include <asm/mac_oss.h>
28
29 #define BOOTINFO_COMPAT_1_0
30 #include <asm/bootinfo.h>
31 #include <asm/machdep.h>
32
33 /* Offset between Unix time (1970-based) and Mac time (1904-based) */
34
35 #define RTC_OFFSET 2082844800
36
37 static void (*rom_reset)(void);
38
39 #ifdef CONFIG_ADB_CUDA
cuda_read_time(void)40 static long cuda_read_time(void)
41 {
42 struct adb_request req;
43 long time;
44
45 if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
46 return 0;
47 while (!req.complete)
48 cuda_poll();
49
50 time = (req.reply[3] << 24) | (req.reply[4] << 16)
51 | (req.reply[5] << 8) | req.reply[6];
52 return time - RTC_OFFSET;
53 }
54
cuda_write_time(long data)55 static void cuda_write_time(long data)
56 {
57 struct adb_request req;
58 data += RTC_OFFSET;
59 if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
60 (data >> 24) & 0xFF, (data >> 16) & 0xFF,
61 (data >> 8) & 0xFF, data & 0xFF) < 0)
62 return;
63 while (!req.complete)
64 cuda_poll();
65 }
66
cuda_read_pram(int offset)67 static __u8 cuda_read_pram(int offset)
68 {
69 struct adb_request req;
70 if (cuda_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
71 (offset >> 8) & 0xFF, offset & 0xFF) < 0)
72 return 0;
73 while (!req.complete)
74 cuda_poll();
75 return req.reply[3];
76 }
77
cuda_write_pram(int offset,__u8 data)78 static void cuda_write_pram(int offset, __u8 data)
79 {
80 struct adb_request req;
81 if (cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
82 (offset >> 8) & 0xFF, offset & 0xFF, data) < 0)
83 return;
84 while (!req.complete)
85 cuda_poll();
86 }
87 #else
88 #define cuda_read_time() 0
89 #define cuda_write_time(n)
90 #define cuda_read_pram NULL
91 #define cuda_write_pram NULL
92 #endif
93
94 #ifdef CONFIG_ADB_PMU68K
pmu_read_time(void)95 static long pmu_read_time(void)
96 {
97 struct adb_request req;
98 long time;
99
100 if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
101 return 0;
102 while (!req.complete)
103 pmu_poll();
104
105 time = (req.reply[1] << 24) | (req.reply[2] << 16)
106 | (req.reply[3] << 8) | req.reply[4];
107 return time - RTC_OFFSET;
108 }
109
pmu_write_time(long data)110 static void pmu_write_time(long data)
111 {
112 struct adb_request req;
113 data += RTC_OFFSET;
114 if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
115 (data >> 24) & 0xFF, (data >> 16) & 0xFF,
116 (data >> 8) & 0xFF, data & 0xFF) < 0)
117 return;
118 while (!req.complete)
119 pmu_poll();
120 }
121
pmu_read_pram(int offset)122 static __u8 pmu_read_pram(int offset)
123 {
124 struct adb_request req;
125 if (pmu_request(&req, NULL, 3, PMU_READ_NVRAM,
126 (offset >> 8) & 0xFF, offset & 0xFF) < 0)
127 return 0;
128 while (!req.complete)
129 pmu_poll();
130 return req.reply[3];
131 }
132
pmu_write_pram(int offset,__u8 data)133 static void pmu_write_pram(int offset, __u8 data)
134 {
135 struct adb_request req;
136 if (pmu_request(&req, NULL, 4, PMU_WRITE_NVRAM,
137 (offset >> 8) & 0xFF, offset & 0xFF, data) < 0)
138 return;
139 while (!req.complete)
140 pmu_poll();
141 }
142 #else
143 #define pmu_read_time() 0
144 #define pmu_write_time(n)
145 #define pmu_read_pram NULL
146 #define pmu_write_pram NULL
147 #endif
148
149 #if 0 /* def CONFIG_ADB_MACIISI */
150 extern int maciisi_request(struct adb_request *req,
151 void (*done)(struct adb_request *), int nbytes, ...);
152
153 static long maciisi_read_time(void)
154 {
155 struct adb_request req;
156 long time;
157
158 if (maciisi_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME))
159 return 0;
160
161 time = (req.reply[3] << 24) | (req.reply[4] << 16)
162 | (req.reply[5] << 8) | req.reply[6];
163 return time - RTC_OFFSET;
164 }
165
166 static void maciisi_write_time(long data)
167 {
168 struct adb_request req;
169 data += RTC_OFFSET;
170 maciisi_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
171 (data >> 24) & 0xFF, (data >> 16) & 0xFF,
172 (data >> 8) & 0xFF, data & 0xFF);
173 }
174
175 static __u8 maciisi_read_pram(int offset)
176 {
177 struct adb_request req;
178 if (maciisi_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
179 (offset >> 8) & 0xFF, offset & 0xFF))
180 return 0;
181 return req.reply[3];
182 }
183
184 static void maciisi_write_pram(int offset, __u8 data)
185 {
186 struct adb_request req;
187 maciisi_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
188 (offset >> 8) & 0xFF, offset & 0xFF, data);
189 }
190 #else
191 #define maciisi_read_time() 0
192 #define maciisi_write_time(n)
193 #define maciisi_read_pram NULL
194 #define maciisi_write_pram NULL
195 #endif
196
197 /*
198 * VIA PRAM/RTC access routines
199 *
200 * Must be called with interrupts disabled and
201 * the RTC should be enabled.
202 */
203
via_pram_readbyte(void)204 static __u8 via_pram_readbyte(void)
205 {
206 int i,reg;
207 __u8 data;
208
209 reg = via1[vBufB] & ~VIA1B_vRTCClk;
210
211 /* Set the RTC data line to be an input. */
212
213 via1[vDirB] &= ~VIA1B_vRTCData;
214
215 /* The bits of the byte come out in MSB order */
216
217 data = 0;
218 for (i = 0 ; i < 8 ; i++) {
219 via1[vBufB] = reg;
220 via1[vBufB] = reg | VIA1B_vRTCClk;
221 data = (data << 1) | (via1[vBufB] & VIA1B_vRTCData);
222 }
223
224 /* Return RTC data line to output state */
225
226 via1[vDirB] |= VIA1B_vRTCData;
227
228 return data;
229 }
230
via_pram_writebyte(__u8 data)231 static void via_pram_writebyte(__u8 data)
232 {
233 int i,reg,bit;
234
235 reg = via1[vBufB] & ~(VIA1B_vRTCClk | VIA1B_vRTCData);
236
237 /* The bits of the byte go in in MSB order */
238
239 for (i = 0 ; i < 8 ; i++) {
240 bit = data & 0x80? 1 : 0;
241 data <<= 1;
242 via1[vBufB] = reg | bit;
243 via1[vBufB] = reg | bit | VIA1B_vRTCClk;
244 }
245 }
246
247 /*
248 * Execute a VIA PRAM/RTC command. For read commands
249 * data should point to a one-byte buffer for the
250 * resulting data. For write commands it should point
251 * to the data byte to for the command.
252 *
253 * This function disables all interrupts while running.
254 */
255
via_pram_command(int command,__u8 * data)256 static void via_pram_command(int command, __u8 *data)
257 {
258 unsigned long flags;
259 int is_read;
260
261 local_irq_save(flags);
262
263 /* Enable the RTC and make sure the strobe line is high */
264
265 via1[vBufB] = (via1[vBufB] | VIA1B_vRTCClk) & ~VIA1B_vRTCEnb;
266
267 if (command & 0xFF00) { /* extended (two-byte) command */
268 via_pram_writebyte((command & 0xFF00) >> 8);
269 via_pram_writebyte(command & 0xFF);
270 is_read = command & 0x8000;
271 } else { /* one-byte command */
272 via_pram_writebyte(command);
273 is_read = command & 0x80;
274 }
275 if (is_read) {
276 *data = via_pram_readbyte();
277 } else {
278 via_pram_writebyte(*data);
279 }
280
281 /* All done, disable the RTC */
282
283 via1[vBufB] |= VIA1B_vRTCEnb;
284
285 local_irq_restore(flags);
286 }
287
via_read_pram(int offset)288 static __u8 via_read_pram(int offset)
289 {
290 return 0;
291 }
292
via_write_pram(int offset,__u8 data)293 static void via_write_pram(int offset, __u8 data)
294 {
295 }
296
297 /*
298 * Return the current time in seconds since January 1, 1904.
299 *
300 * This only works on machines with the VIA-based PRAM/RTC, which
301 * is basically any machine with Mac II-style ADB.
302 */
303
via_read_time(void)304 static long via_read_time(void)
305 {
306 union {
307 __u8 cdata[4];
308 long idata;
309 } result, last_result;
310 int ct;
311
312 /*
313 * The NetBSD guys say to loop until you get the same reading
314 * twice in a row.
315 */
316
317 ct = 0;
318 do {
319 if (++ct > 10) {
320 printk("via_read_time: couldn't get valid time, "
321 "last read = 0x%08lx and 0x%08lx\n",
322 last_result.idata, result.idata);
323 break;
324 }
325
326 last_result.idata = result.idata;
327 result.idata = 0;
328
329 via_pram_command(0x81, &result.cdata[3]);
330 via_pram_command(0x85, &result.cdata[2]);
331 via_pram_command(0x89, &result.cdata[1]);
332 via_pram_command(0x8D, &result.cdata[0]);
333 } while (result.idata != last_result.idata);
334
335 return result.idata - RTC_OFFSET;
336 }
337
338 /*
339 * Set the current time to a number of seconds since January 1, 1904.
340 *
341 * This only works on machines with the VIA-based PRAM/RTC, which
342 * is basically any machine with Mac II-style ADB.
343 */
344
via_write_time(long time)345 static void via_write_time(long time)
346 {
347 union {
348 __u8 cdata[4];
349 long idata;
350 } data;
351 __u8 temp;
352
353 /* Clear the write protect bit */
354
355 temp = 0x55;
356 via_pram_command(0x35, &temp);
357
358 data.idata = time + RTC_OFFSET;
359 via_pram_command(0x01, &data.cdata[3]);
360 via_pram_command(0x05, &data.cdata[2]);
361 via_pram_command(0x09, &data.cdata[1]);
362 via_pram_command(0x0D, &data.cdata[0]);
363
364 /* Set the write protect bit */
365
366 temp = 0xD5;
367 via_pram_command(0x35, &temp);
368 }
369
via_shutdown(void)370 static void via_shutdown(void)
371 {
372 if (rbv_present) {
373 via2[rBufB] &= ~0x04;
374 } else {
375 /* Direction of vDirB is output */
376 via2[vDirB] |= 0x04;
377 /* Send a value of 0 on that line */
378 via2[vBufB] &= ~0x04;
379 mdelay(1000);
380 }
381 }
382
383 /*
384 * FIXME: not sure how this is supposed to work exactly...
385 */
386
oss_shutdown(void)387 static void oss_shutdown(void)
388 {
389 oss->rom_ctrl = OSS_POWEROFF;
390 }
391
392 #ifdef CONFIG_ADB_CUDA
393
cuda_restart(void)394 static void cuda_restart(void)
395 {
396 struct adb_request req;
397 if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_RESET_SYSTEM) < 0)
398 return;
399 while (!req.complete)
400 cuda_poll();
401 }
402
cuda_shutdown(void)403 static void cuda_shutdown(void)
404 {
405 struct adb_request req;
406 if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_POWERDOWN) < 0)
407 return;
408 while (!req.complete)
409 cuda_poll();
410 }
411
412 #endif /* CONFIG_ADB_CUDA */
413
414 #ifdef CONFIG_ADB_PMU68K
415
pmu_restart(void)416 void pmu_restart(void)
417 {
418 struct adb_request req;
419 if (pmu_request(&req, NULL,
420 2, PMU_SET_INTR_MASK, PMU_INT_ADB|PMU_INT_TICK) < 0)
421 return;
422 while (!req.complete)
423 pmu_poll();
424 if (pmu_request(&req, NULL, 1, PMU_RESET) < 0)
425 return;
426 while (!req.complete)
427 pmu_poll();
428 }
429
pmu_shutdown(void)430 void pmu_shutdown(void)
431 {
432 struct adb_request req;
433 if (pmu_request(&req, NULL,
434 2, PMU_SET_INTR_MASK, PMU_INT_ADB|PMU_INT_TICK) < 0)
435 return;
436 while (!req.complete)
437 pmu_poll();
438 if (pmu_request(&req, NULL, 5, PMU_SHUTDOWN, 'M', 'A', 'T', 'T') < 0)
439 return;
440 while (!req.complete)
441 pmu_poll();
442 }
443
444 #endif
445
446 /*
447 *-------------------------------------------------------------------
448 * Below this point are the generic routines; they'll dispatch to the
449 * correct routine for the hardware on which we're running.
450 *-------------------------------------------------------------------
451 */
452
mac_pram_read(int offset,__u8 * buffer,int len)453 void mac_pram_read(int offset, __u8 *buffer, int len)
454 {
455 __u8 (*func)(int);
456 int i;
457
458 switch(macintosh_config->adb_type) {
459 case MAC_ADB_IISI:
460 func = maciisi_read_pram; break;
461 case MAC_ADB_PB1:
462 case MAC_ADB_PB2:
463 func = pmu_read_pram; break;
464 case MAC_ADB_CUDA:
465 func = cuda_read_pram; break;
466 default:
467 func = via_read_pram;
468 }
469 if (!func)
470 return;
471 for (i = 0 ; i < len ; i++) {
472 buffer[i] = (*func)(offset++);
473 }
474 }
475
mac_pram_write(int offset,__u8 * buffer,int len)476 void mac_pram_write(int offset, __u8 *buffer, int len)
477 {
478 void (*func)(int, __u8);
479 int i;
480
481 switch(macintosh_config->adb_type) {
482 case MAC_ADB_IISI:
483 func = maciisi_write_pram; break;
484 case MAC_ADB_PB1:
485 case MAC_ADB_PB2:
486 func = pmu_write_pram; break;
487 case MAC_ADB_CUDA:
488 func = cuda_write_pram; break;
489 default:
490 func = via_write_pram;
491 }
492 if (!func)
493 return;
494 for (i = 0 ; i < len ; i++) {
495 (*func)(offset++, buffer[i]);
496 }
497 }
498
mac_poweroff(void)499 void mac_poweroff(void)
500 {
501 /*
502 * MAC_ADB_IISI may need to be moved up here if it doesn't actually
503 * work using the ADB packet method. --David Kilzer
504 */
505
506 if (oss_present) {
507 oss_shutdown();
508 } else if (macintosh_config->adb_type == MAC_ADB_II) {
509 via_shutdown();
510 #ifdef CONFIG_ADB_CUDA
511 } else if (macintosh_config->adb_type == MAC_ADB_CUDA) {
512 cuda_shutdown();
513 #endif
514 #ifdef CONFIG_ADB_PMU68K
515 } else if (macintosh_config->adb_type == MAC_ADB_PB1
516 || macintosh_config->adb_type == MAC_ADB_PB2) {
517 pmu_shutdown();
518 #endif
519 }
520 local_irq_enable();
521 printk("It is now safe to turn off your Macintosh.\n");
522 while(1);
523 }
524
mac_reset(void)525 void mac_reset(void)
526 {
527 if (macintosh_config->adb_type == MAC_ADB_II) {
528 unsigned long flags;
529
530 /* need ROMBASE in booter */
531 /* indeed, plus need to MAP THE ROM !! */
532
533 if (mac_bi_data.rombase == 0)
534 mac_bi_data.rombase = 0x40800000;
535
536 /* works on some */
537 rom_reset = (void *) (mac_bi_data.rombase + 0xa);
538
539 if (macintosh_config->ident == MAC_MODEL_SE30) {
540 /*
541 * MSch: Machines known to crash on ROM reset ...
542 */
543 } else {
544 local_irq_save(flags);
545
546 rom_reset();
547
548 local_irq_restore(flags);
549 }
550 #ifdef CONFIG_ADB_CUDA
551 } else if (macintosh_config->adb_type == MAC_ADB_CUDA) {
552 cuda_restart();
553 #endif
554 #ifdef CONFIG_ADB_PMU68K
555 } else if (macintosh_config->adb_type == MAC_ADB_PB1
556 || macintosh_config->adb_type == MAC_ADB_PB2) {
557 pmu_restart();
558 #endif
559 } else if (CPU_IS_030) {
560
561 /* 030-specific reset routine. The idea is general, but the
562 * specific registers to reset are '030-specific. Until I
563 * have a non-030 machine, I can't test anything else.
564 * -- C. Scott Ananian <cananian@alumni.princeton.edu>
565 */
566
567 unsigned long rombase = 0x40000000;
568
569 /* make a 1-to-1 mapping, using the transparent tran. reg. */
570 unsigned long virt = (unsigned long) mac_reset;
571 unsigned long phys = virt_to_phys(mac_reset);
572 unsigned long addr = (phys&0xFF000000)|0x8777;
573 unsigned long offset = phys-virt;
574 local_irq_disable(); /* lets not screw this up, ok? */
575 __asm__ __volatile__(".chip 68030\n\t"
576 "pmove %0,%/tt0\n\t"
577 ".chip 68k"
578 : : "m" (addr));
579 /* Now jump to physical address so we can disable MMU */
580 __asm__ __volatile__(
581 ".chip 68030\n\t"
582 "lea %/pc@(1f),%/a0\n\t"
583 "addl %0,%/a0\n\t"/* fixup target address and stack ptr */
584 "addl %0,%/sp\n\t"
585 "pflusha\n\t"
586 "jmp %/a0@\n\t" /* jump into physical memory */
587 "0:.long 0\n\t" /* a constant zero. */
588 /* OK. Now reset everything and jump to reset vector. */
589 "1:\n\t"
590 "lea %/pc@(0b),%/a0\n\t"
591 "pmove %/a0@, %/tc\n\t" /* disable mmu */
592 "pmove %/a0@, %/tt0\n\t" /* disable tt0 */
593 "pmove %/a0@, %/tt1\n\t" /* disable tt1 */
594 "movel #0, %/a0\n\t"
595 "movec %/a0, %/vbr\n\t" /* clear vector base register */
596 "movec %/a0, %/cacr\n\t" /* disable caches */
597 "movel #0x0808,%/a0\n\t"
598 "movec %/a0, %/cacr\n\t" /* flush i&d caches */
599 "movew #0x2700,%/sr\n\t" /* set up status register */
600 "movel %1@(0x0),%/a0\n\t"/* load interrupt stack pointer */
601 "movec %/a0, %/isp\n\t"
602 "movel %1@(0x4),%/a0\n\t" /* load reset vector */
603 "reset\n\t" /* reset external devices */
604 "jmp %/a0@\n\t" /* jump to the reset vector */
605 ".chip 68k"
606 : : "r" (offset), "a" (rombase) : "a0");
607 }
608
609 /* should never get here */
610 local_irq_enable();
611 printk ("Restart failed. Please restart manually.\n");
612 while(1);
613 }
614
615 /*
616 * This function translates seconds since 1970 into a proper date.
617 *
618 * Algorithm cribbed from glibc2.1, __offtime().
619 */
620 #define SECS_PER_MINUTE (60)
621 #define SECS_PER_HOUR (SECS_PER_MINUTE * 60)
622 #define SECS_PER_DAY (SECS_PER_HOUR * 24)
623
unmktime(unsigned long time,long offset,int * yearp,int * monp,int * dayp,int * hourp,int * minp,int * secp)624 static void unmktime(unsigned long time, long offset,
625 int *yearp, int *monp, int *dayp,
626 int *hourp, int *minp, int *secp)
627 {
628 /* How many days come before each month (0-12). */
629 static const unsigned short int __mon_yday[2][13] =
630 {
631 /* Normal years. */
632 { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
633 /* Leap years. */
634 { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
635 };
636 long int days, rem, y, wday, yday;
637 const unsigned short int *ip;
638
639 days = time / SECS_PER_DAY;
640 rem = time % SECS_PER_DAY;
641 rem += offset;
642 while (rem < 0) {
643 rem += SECS_PER_DAY;
644 --days;
645 }
646 while (rem >= SECS_PER_DAY) {
647 rem -= SECS_PER_DAY;
648 ++days;
649 }
650 *hourp = rem / SECS_PER_HOUR;
651 rem %= SECS_PER_HOUR;
652 *minp = rem / SECS_PER_MINUTE;
653 *secp = rem % SECS_PER_MINUTE;
654 /* January 1, 1970 was a Thursday. */
655 wday = (4 + days) % 7; /* Day in the week. Not currently used */
656 if (wday < 0) wday += 7;
657 y = 1970;
658
659 #define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
660 #define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
661 #define __isleap(year) \
662 ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
663
664 while (days < 0 || days >= (__isleap (y) ? 366 : 365))
665 {
666 /* Guess a corrected year, assuming 365 days per year. */
667 long int yg = y + days / 365 - (days % 365 < 0);
668
669 /* Adjust DAYS and Y to match the guessed year. */
670 days -= ((yg - y) * 365
671 + LEAPS_THRU_END_OF (yg - 1)
672 - LEAPS_THRU_END_OF (y - 1));
673 y = yg;
674 }
675 *yearp = y - 1900;
676 yday = days; /* day in the year. Not currently used. */
677 ip = __mon_yday[__isleap(y)];
678 for (y = 11; days < (long int) ip[y]; --y)
679 continue;
680 days -= ip[y];
681 *monp = y;
682 *dayp = days + 1; /* day in the month */
683 return;
684 }
685
686 /*
687 * Read/write the hardware clock.
688 */
689
mac_hwclk(int op,struct rtc_time * t)690 int mac_hwclk(int op, struct rtc_time *t)
691 {
692 unsigned long now;
693
694 if (!op) { /* read */
695 switch (macintosh_config->adb_type) {
696 case MAC_ADB_II:
697 case MAC_ADB_IOP:
698 now = via_read_time();
699 break;
700 case MAC_ADB_IISI:
701 now = maciisi_read_time();
702 break;
703 case MAC_ADB_PB1:
704 case MAC_ADB_PB2:
705 now = pmu_read_time();
706 break;
707 case MAC_ADB_CUDA:
708 now = cuda_read_time();
709 break;
710 default:
711 now = 0;
712 }
713
714 t->tm_wday = 0;
715 unmktime(now, 0,
716 &t->tm_year, &t->tm_mon, &t->tm_mday,
717 &t->tm_hour, &t->tm_min, &t->tm_sec);
718 #if 0
719 printk("mac_hwclk: read %04d-%02d-%-2d %02d:%02d:%02d\n",
720 t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
721 t->tm_hour, t->tm_min, t->tm_sec);
722 #endif
723 } else { /* write */
724 #if 0
725 printk("mac_hwclk: tried to write %04d-%02d-%-2d %02d:%02d:%02d\n",
726 t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
727 t->tm_hour, t->tm_min, t->tm_sec);
728 #endif
729
730 now = mktime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
731 t->tm_hour, t->tm_min, t->tm_sec);
732
733 switch (macintosh_config->adb_type) {
734 case MAC_ADB_II:
735 case MAC_ADB_IOP:
736 via_write_time(now);
737 break;
738 case MAC_ADB_CUDA:
739 cuda_write_time(now);
740 break;
741 case MAC_ADB_PB1:
742 case MAC_ADB_PB2:
743 pmu_write_time(now);
744 break;
745 case MAC_ADB_IISI:
746 maciisi_write_time(now);
747 }
748 }
749 return 0;
750 }
751
752 /*
753 * Set minutes/seconds in the hardware clock
754 */
755
mac_set_clock_mmss(unsigned long nowtime)756 int mac_set_clock_mmss (unsigned long nowtime)
757 {
758 struct rtc_time now;
759
760 mac_hwclk(0, &now);
761 now.tm_sec = nowtime % 60;
762 now.tm_min = (nowtime / 60) % 60;
763 mac_hwclk(1, &now);
764
765 return 0;
766 }
767