1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * PowerPC version
4 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
5 *
6 * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
7 * and Cort Dougan (PReP) (cort@cs.nmt.edu)
8 * Copyright (C) 1996 Paul Mackerras
9 * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
10 *
11 * Derived from "arch/i386/mm/init.c"
12 * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
13 */
14
15 #include <linux/module.h>
16 #include <linux/sched.h>
17 #include <linux/kernel.h>
18 #include <linux/errno.h>
19 #include <linux/string.h>
20 #include <linux/types.h>
21 #include <linux/mm.h>
22 #include <linux/stddef.h>
23 #include <linux/init.h>
24 #include <linux/highmem.h>
25 #include <linux/initrd.h>
26 #include <linux/pagemap.h>
27 #include <linux/memblock.h>
28 #include <linux/gfp.h>
29 #include <linux/slab.h>
30 #include <linux/hugetlb.h>
31
32 #include <asm/io.h>
33 #include <asm/mmu.h>
34 #include <asm/smp.h>
35 #include <asm/machdep.h>
36 #include <asm/btext.h>
37 #include <asm/tlb.h>
38 #include <asm/sections.h>
39 #include <asm/hugetlb.h>
40 #include <asm/kup.h>
41 #include <asm/kasan.h>
42
43 #include <mm/mmu_decl.h>
44
45 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
46 /* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
47 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
48 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START"
49 #endif
50 #endif
51 #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
52
53 phys_addr_t total_memory;
54 phys_addr_t total_lowmem;
55
56 #ifdef CONFIG_RELOCATABLE
57 /* Used in __va()/__pa() */
58 long long virt_phys_offset;
59 EXPORT_SYMBOL(virt_phys_offset);
60 #endif
61
62 phys_addr_t lowmem_end_addr;
63
64 int boot_mapsize;
65 #ifdef CONFIG_PPC_PMAC
66 unsigned long agp_special_page;
67 EXPORT_SYMBOL(agp_special_page);
68 #endif
69
70 void MMU_init(void);
71
72 /*
73 * this tells the system to map all of ram with the segregs
74 * (i.e. page tables) instead of the bats.
75 * -- Cort
76 */
77 int __map_without_bats;
78 int __map_without_ltlbs;
79
80 /* max amount of low RAM to map in */
81 unsigned long __max_low_memory = MAX_LOW_MEM;
82
83 /*
84 * Check for command-line options that affect what MMU_init will do.
85 */
MMU_setup(void)86 static void __init MMU_setup(void)
87 {
88 /* Check for nobats option (used in mapin_ram). */
89 if (strstr(boot_command_line, "nobats")) {
90 __map_without_bats = 1;
91 }
92
93 if (strstr(boot_command_line, "noltlbs")) {
94 __map_without_ltlbs = 1;
95 }
96 if (IS_ENABLED(CONFIG_PPC_8xx))
97 return;
98
99 if (IS_ENABLED(CONFIG_KFENCE))
100 __map_without_ltlbs = 1;
101
102 if (debug_pagealloc_enabled())
103 __map_without_ltlbs = 1;
104
105 if (strict_kernel_rwx_enabled())
106 __map_without_ltlbs = 1;
107 }
108
109 /*
110 * MMU_init sets up the basic memory mappings for the kernel,
111 * including both RAM and possibly some I/O regions,
112 * and sets up the page tables and the MMU hardware ready to go.
113 */
MMU_init(void)114 void __init MMU_init(void)
115 {
116 if (ppc_md.progress)
117 ppc_md.progress("MMU:enter", 0x111);
118
119 /* parse args from command line */
120 MMU_setup();
121
122 /*
123 * Reserve gigantic pages for hugetlb. This MUST occur before
124 * lowmem_end_addr is initialized below.
125 */
126 if (memblock.memory.cnt > 1) {
127 #ifndef CONFIG_WII
128 memblock_enforce_memory_limit(memblock.memory.regions[0].size);
129 pr_warn("Only using first contiguous memory region\n");
130 #else
131 wii_memory_fixups();
132 #endif
133 }
134
135 total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
136 lowmem_end_addr = memstart_addr + total_lowmem;
137
138 #ifdef CONFIG_FSL_BOOKE
139 /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
140 * entries, so we need to adjust lowmem to match the amount we can map
141 * in the fixed entries */
142 adjust_total_lowmem();
143 #endif /* CONFIG_FSL_BOOKE */
144
145 if (total_lowmem > __max_low_memory) {
146 total_lowmem = __max_low_memory;
147 lowmem_end_addr = memstart_addr + total_lowmem;
148 #ifndef CONFIG_HIGHMEM
149 total_memory = total_lowmem;
150 memblock_enforce_memory_limit(total_lowmem);
151 #endif /* CONFIG_HIGHMEM */
152 }
153
154 /* Initialize the MMU hardware */
155 if (ppc_md.progress)
156 ppc_md.progress("MMU:hw init", 0x300);
157 MMU_init_hw();
158
159 /* Map in all of RAM starting at KERNELBASE */
160 if (ppc_md.progress)
161 ppc_md.progress("MMU:mapin", 0x301);
162 mapin_ram();
163
164 /* Initialize early top-down ioremap allocator */
165 ioremap_bot = IOREMAP_TOP;
166
167 if (ppc_md.progress)
168 ppc_md.progress("MMU:exit", 0x211);
169
170 /* From now on, btext is no longer BAT mapped if it was at all */
171 #ifdef CONFIG_BOOTX_TEXT
172 btext_unmap();
173 #endif
174
175 kasan_mmu_init();
176
177 setup_kup();
178
179 /* Shortly after that, the entire linear mapping will be available */
180 memblock_set_current_limit(lowmem_end_addr);
181 }
182