1 /*
2 * Copyright © 2006 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
22 *
23 * Authors:
24 * Eric Anholt <eric@anholt.net>
25 *
26 */
27
28 #include "dvo.h"
29
30 /*
31 * register definitions for the i82807aa.
32 *
33 * Documentation on this chipset can be found in datasheet #29069001 at
34 * intel.com.
35 */
36
37 /*
38 * VCH Revision & GMBus Base Addr
39 */
40 #define VR00 0x00
41 # define VR00_BASE_ADDRESS_MASK 0x007f
42
43 /*
44 * Functionality Enable
45 */
46 #define VR01 0x01
47
48 /*
49 * Enable the panel fitter
50 */
51 # define VR01_PANEL_FIT_ENABLE (1 << 3)
52 /*
53 * Enables the LCD display.
54 *
55 * This must not be set while VR01_DVO_BYPASS_ENABLE is set.
56 */
57 # define VR01_LCD_ENABLE (1 << 2)
58 /** Enables the DVO repeater. */
59 # define VR01_DVO_BYPASS_ENABLE (1 << 1)
60 /** Enables the DVO clock */
61 # define VR01_DVO_ENABLE (1 << 0)
62
63 /*
64 * LCD Interface Format
65 */
66 #define VR10 0x10
67 /** Enables LVDS output instead of CMOS */
68 # define VR10_LVDS_ENABLE (1 << 4)
69 /** Enables 18-bit LVDS output. */
70 # define VR10_INTERFACE_1X18 (0 << 2)
71 /** Enables 24-bit LVDS or CMOS output */
72 # define VR10_INTERFACE_1X24 (1 << 2)
73 /** Enables 2x18-bit LVDS or CMOS output. */
74 # define VR10_INTERFACE_2X18 (2 << 2)
75 /** Enables 2x24-bit LVDS output */
76 # define VR10_INTERFACE_2X24 (3 << 2)
77
78 /*
79 * VR20 LCD Horizontal Display Size
80 */
81 #define VR20 0x20
82
83 /*
84 * LCD Vertical Display Size
85 */
86 #define VR21 0x20
87
88 /*
89 * Panel power down status
90 */
91 #define VR30 0x30
92 /** Read only bit indicating that the panel is not in a safe poweroff state. */
93 # define VR30_PANEL_ON (1 << 15)
94
95 #define VR40 0x40
96 # define VR40_STALL_ENABLE (1 << 13)
97 # define VR40_VERTICAL_INTERP_ENABLE (1 << 12)
98 # define VR40_ENHANCED_PANEL_FITTING (1 << 11)
99 # define VR40_HORIZONTAL_INTERP_ENABLE (1 << 10)
100 # define VR40_AUTO_RATIO_ENABLE (1 << 9)
101 # define VR40_CLOCK_GATING_ENABLE (1 << 8)
102
103 /*
104 * Panel Fitting Vertical Ratio
105 * (((image_height - 1) << 16) / ((panel_height - 1))) >> 2
106 */
107 #define VR41 0x41
108
109 /*
110 * Panel Fitting Horizontal Ratio
111 * (((image_width - 1) << 16) / ((panel_width - 1))) >> 2
112 */
113 #define VR42 0x42
114
115 /*
116 * Horizontal Image Size
117 */
118 #define VR43 0x43
119
120 /* VR80 GPIO 0
121 */
122 #define VR80 0x80
123 #define VR81 0x81
124 #define VR82 0x82
125 #define VR83 0x83
126 #define VR84 0x84
127 #define VR85 0x85
128 #define VR86 0x86
129 #define VR87 0x87
130
131 /* VR88 GPIO 8
132 */
133 #define VR88 0x88
134
135 /* Graphics BIOS scratch 0
136 */
137 #define VR8E 0x8E
138 # define VR8E_PANEL_TYPE_MASK (0xf << 0)
139 # define VR8E_PANEL_INTERFACE_CMOS (0 << 4)
140 # define VR8E_PANEL_INTERFACE_LVDS (1 << 4)
141 # define VR8E_FORCE_DEFAULT_PANEL (1 << 5)
142
143 /* Graphics BIOS scratch 1
144 */
145 #define VR8F 0x8F
146 # define VR8F_VCH_PRESENT (1 << 0)
147 # define VR8F_DISPLAY_CONN (1 << 1)
148 # define VR8F_POWER_MASK (0x3c)
149 # define VR8F_POWER_POS (2)
150
151
152 struct ivch_priv {
153 bool quiet;
154
155 uint16_t width, height;
156 };
157
158
159 static void ivch_dump_regs(struct intel_dvo_device *dvo);
160
161 /**
162 * Reads a register on the ivch.
163 *
164 * Each of the 256 registers are 16 bits long.
165 */
ivch_read(struct intel_dvo_device * dvo,int addr,uint16_t * data)166 static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
167 {
168 struct ivch_priv *priv = dvo->dev_priv;
169 struct i2c_adapter *adapter = dvo->i2c_bus;
170 u8 out_buf[1];
171 u8 in_buf[2];
172
173 struct i2c_msg msgs[] = {
174 {
175 .addr = dvo->slave_addr,
176 .flags = I2C_M_RD,
177 .len = 0,
178 },
179 {
180 .addr = 0,
181 .flags = I2C_M_NOSTART,
182 .len = 1,
183 .buf = out_buf,
184 },
185 {
186 .addr = dvo->slave_addr,
187 .flags = I2C_M_RD | I2C_M_NOSTART,
188 .len = 2,
189 .buf = in_buf,
190 }
191 };
192
193 out_buf[0] = addr;
194
195 if (i2c_transfer(adapter, msgs, 3) == 3) {
196 *data = (in_buf[1] << 8) | in_buf[0];
197 return true;
198 };
199
200 if (!priv->quiet) {
201 DRM_DEBUG_KMS("Unable to read register 0x%02x from "
202 "%s:%02x.\n",
203 addr, adapter->name, dvo->slave_addr);
204 }
205 return false;
206 }
207
208 /** Writes a 16-bit register on the ivch */
ivch_write(struct intel_dvo_device * dvo,int addr,uint16_t data)209 static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
210 {
211 struct ivch_priv *priv = dvo->dev_priv;
212 struct i2c_adapter *adapter = dvo->i2c_bus;
213 u8 out_buf[3];
214 struct i2c_msg msg = {
215 .addr = dvo->slave_addr,
216 .flags = 0,
217 .len = 3,
218 .buf = out_buf,
219 };
220
221 out_buf[0] = addr;
222 out_buf[1] = data & 0xff;
223 out_buf[2] = data >> 8;
224
225 if (i2c_transfer(adapter, &msg, 1) == 1)
226 return true;
227
228 if (!priv->quiet) {
229 DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
230 addr, adapter->name, dvo->slave_addr);
231 }
232
233 return false;
234 }
235
236 /** Probes the given bus and slave address for an ivch */
ivch_init(struct intel_dvo_device * dvo,struct i2c_adapter * adapter)237 static bool ivch_init(struct intel_dvo_device *dvo,
238 struct i2c_adapter *adapter)
239 {
240 struct ivch_priv *priv;
241 uint16_t temp;
242
243 priv = kzalloc(sizeof(struct ivch_priv), GFP_KERNEL);
244 if (priv == NULL)
245 return false;
246
247 dvo->i2c_bus = adapter;
248 dvo->dev_priv = priv;
249 priv->quiet = true;
250
251 if (!ivch_read(dvo, VR00, &temp))
252 goto out;
253 priv->quiet = false;
254
255 /* Since the identification bits are probably zeroes, which doesn't seem
256 * very unique, check that the value in the base address field matches
257 * the address it's responding on.
258 */
259 if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) {
260 DRM_DEBUG_KMS("ivch detect failed due to address mismatch "
261 "(%d vs %d)\n",
262 (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr);
263 goto out;
264 }
265
266 ivch_read(dvo, VR20, &priv->width);
267 ivch_read(dvo, VR21, &priv->height);
268
269 return true;
270
271 out:
272 kfree(priv);
273 return false;
274 }
275
ivch_detect(struct intel_dvo_device * dvo)276 static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo)
277 {
278 return connector_status_connected;
279 }
280
ivch_mode_valid(struct intel_dvo_device * dvo,struct drm_display_mode * mode)281 static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo,
282 struct drm_display_mode *mode)
283 {
284 if (mode->clock > 112000)
285 return MODE_CLOCK_HIGH;
286
287 return MODE_OK;
288 }
289
290 /** Sets the power state of the panel connected to the ivch */
ivch_dpms(struct intel_dvo_device * dvo,int mode)291 static void ivch_dpms(struct intel_dvo_device *dvo, int mode)
292 {
293 int i;
294 uint16_t vr01, vr30, backlight;
295
296 /* Set the new power state of the panel. */
297 if (!ivch_read(dvo, VR01, &vr01))
298 return;
299
300 if (mode == DRM_MODE_DPMS_ON)
301 backlight = 1;
302 else
303 backlight = 0;
304 ivch_write(dvo, VR80, backlight);
305
306 if (mode == DRM_MODE_DPMS_ON)
307 vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE;
308 else
309 vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE);
310
311 ivch_write(dvo, VR01, vr01);
312
313 /* Wait for the panel to make its state transition */
314 for (i = 0; i < 100; i++) {
315 if (!ivch_read(dvo, VR30, &vr30))
316 break;
317
318 if (((vr30 & VR30_PANEL_ON) != 0) == (mode == DRM_MODE_DPMS_ON))
319 break;
320 udelay(1000);
321 }
322 /* wait some more; vch may fail to resync sometimes without this */
323 udelay(16 * 1000);
324 }
325
ivch_mode_set(struct intel_dvo_device * dvo,struct drm_display_mode * mode,struct drm_display_mode * adjusted_mode)326 static void ivch_mode_set(struct intel_dvo_device *dvo,
327 struct drm_display_mode *mode,
328 struct drm_display_mode *adjusted_mode)
329 {
330 uint16_t vr40 = 0;
331 uint16_t vr01;
332
333 vr01 = 0;
334 vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE |
335 VR40_HORIZONTAL_INTERP_ENABLE);
336
337 if (mode->hdisplay != adjusted_mode->hdisplay ||
338 mode->vdisplay != adjusted_mode->vdisplay) {
339 uint16_t x_ratio, y_ratio;
340
341 vr01 |= VR01_PANEL_FIT_ENABLE;
342 vr40 |= VR40_CLOCK_GATING_ENABLE;
343 x_ratio = (((mode->hdisplay - 1) << 16) /
344 (adjusted_mode->hdisplay - 1)) >> 2;
345 y_ratio = (((mode->vdisplay - 1) << 16) /
346 (adjusted_mode->vdisplay - 1)) >> 2;
347 ivch_write(dvo, VR42, x_ratio);
348 ivch_write(dvo, VR41, y_ratio);
349 } else {
350 vr01 &= ~VR01_PANEL_FIT_ENABLE;
351 vr40 &= ~VR40_CLOCK_GATING_ENABLE;
352 }
353 vr40 &= ~VR40_AUTO_RATIO_ENABLE;
354
355 ivch_write(dvo, VR01, vr01);
356 ivch_write(dvo, VR40, vr40);
357
358 ivch_dump_regs(dvo);
359 }
360
ivch_dump_regs(struct intel_dvo_device * dvo)361 static void ivch_dump_regs(struct intel_dvo_device *dvo)
362 {
363 uint16_t val;
364
365 ivch_read(dvo, VR00, &val);
366 DRM_LOG_KMS("VR00: 0x%04x\n", val);
367 ivch_read(dvo, VR01, &val);
368 DRM_LOG_KMS("VR01: 0x%04x\n", val);
369 ivch_read(dvo, VR30, &val);
370 DRM_LOG_KMS("VR30: 0x%04x\n", val);
371 ivch_read(dvo, VR40, &val);
372 DRM_LOG_KMS("VR40: 0x%04x\n", val);
373
374 /* GPIO registers */
375 ivch_read(dvo, VR80, &val);
376 DRM_LOG_KMS("VR80: 0x%04x\n", val);
377 ivch_read(dvo, VR81, &val);
378 DRM_LOG_KMS("VR81: 0x%04x\n", val);
379 ivch_read(dvo, VR82, &val);
380 DRM_LOG_KMS("VR82: 0x%04x\n", val);
381 ivch_read(dvo, VR83, &val);
382 DRM_LOG_KMS("VR83: 0x%04x\n", val);
383 ivch_read(dvo, VR84, &val);
384 DRM_LOG_KMS("VR84: 0x%04x\n", val);
385 ivch_read(dvo, VR85, &val);
386 DRM_LOG_KMS("VR85: 0x%04x\n", val);
387 ivch_read(dvo, VR86, &val);
388 DRM_LOG_KMS("VR86: 0x%04x\n", val);
389 ivch_read(dvo, VR87, &val);
390 DRM_LOG_KMS("VR87: 0x%04x\n", val);
391 ivch_read(dvo, VR88, &val);
392 DRM_LOG_KMS("VR88: 0x%04x\n", val);
393
394 /* Scratch register 0 - AIM Panel type */
395 ivch_read(dvo, VR8E, &val);
396 DRM_LOG_KMS("VR8E: 0x%04x\n", val);
397
398 /* Scratch register 1 - Status register */
399 ivch_read(dvo, VR8F, &val);
400 DRM_LOG_KMS("VR8F: 0x%04x\n", val);
401 }
402
ivch_destroy(struct intel_dvo_device * dvo)403 static void ivch_destroy(struct intel_dvo_device *dvo)
404 {
405 struct ivch_priv *priv = dvo->dev_priv;
406
407 if (priv) {
408 kfree(priv);
409 dvo->dev_priv = NULL;
410 }
411 }
412
413 struct intel_dvo_dev_ops ivch_ops = {
414 .init = ivch_init,
415 .dpms = ivch_dpms,
416 .mode_valid = ivch_mode_valid,
417 .mode_set = ivch_mode_set,
418 .detect = ivch_detect,
419 .dump_regs = ivch_dump_regs,
420 .destroy = ivch_destroy,
421 };
422