1 /*
2  * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
3  * Copyright © 2006-2008,2010 Intel Corporation
4  *   Jesse Barnes <jesse.barnes@intel.com>
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a
7  * copy of this software and associated documentation files (the "Software"),
8  * to deal in the Software without restriction, including without limitation
9  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
10  * and/or sell copies of the Software, and to permit persons to whom the
11  * Software is furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice (including the next
14  * paragraph) shall be included in all copies or substantial portions of the
15  * Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
22  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
23  * DEALINGS IN THE SOFTWARE.
24  *
25  * Authors:
26  *	Eric Anholt <eric@anholt.net>
27  *	Chris Wilson <chris@chris-wilson.co.uk>
28  */
29 #include <linux/i2c.h>
30 #include <linux/i2c-algo-bit.h>
31 #include <linux/export.h>
32 #include "drmP.h"
33 #include "drm.h"
34 #include "intel_drv.h"
35 #include "i915_drm.h"
36 #include "i915_drv.h"
37 
38 /* Intel GPIO access functions */
39 
40 #define I2C_RISEFALL_TIME 10
41 
42 static inline struct intel_gmbus *
to_intel_gmbus(struct i2c_adapter * i2c)43 to_intel_gmbus(struct i2c_adapter *i2c)
44 {
45 	return container_of(i2c, struct intel_gmbus, adapter);
46 }
47 
48 void
intel_i2c_reset(struct drm_device * dev)49 intel_i2c_reset(struct drm_device *dev)
50 {
51 	struct drm_i915_private *dev_priv = dev->dev_private;
52 	if (HAS_PCH_SPLIT(dev))
53 		I915_WRITE(PCH_GMBUS0, 0);
54 	else
55 		I915_WRITE(GMBUS0, 0);
56 }
57 
intel_i2c_quirk_set(struct drm_i915_private * dev_priv,bool enable)58 static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable)
59 {
60 	u32 val;
61 
62 	/* When using bit bashing for I2C, this bit needs to be set to 1 */
63 	if (!IS_PINEVIEW(dev_priv->dev))
64 		return;
65 
66 	val = I915_READ(DSPCLK_GATE_D);
67 	if (enable)
68 		val |= DPCUNIT_CLOCK_GATE_DISABLE;
69 	else
70 		val &= ~DPCUNIT_CLOCK_GATE_DISABLE;
71 	I915_WRITE(DSPCLK_GATE_D, val);
72 }
73 
get_reserved(struct intel_gmbus * bus)74 static u32 get_reserved(struct intel_gmbus *bus)
75 {
76 	struct drm_i915_private *dev_priv = bus->dev_priv;
77 	struct drm_device *dev = dev_priv->dev;
78 	u32 reserved = 0;
79 
80 	/* On most chips, these bits must be preserved in software. */
81 	if (!IS_I830(dev) && !IS_845G(dev))
82 		reserved = I915_READ_NOTRACE(bus->gpio_reg) &
83 					     (GPIO_DATA_PULLUP_DISABLE |
84 					      GPIO_CLOCK_PULLUP_DISABLE);
85 
86 	return reserved;
87 }
88 
get_clock(void * data)89 static int get_clock(void *data)
90 {
91 	struct intel_gmbus *bus = data;
92 	struct drm_i915_private *dev_priv = bus->dev_priv;
93 	u32 reserved = get_reserved(bus);
94 	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | GPIO_CLOCK_DIR_MASK);
95 	I915_WRITE_NOTRACE(bus->gpio_reg, reserved);
96 	return (I915_READ_NOTRACE(bus->gpio_reg) & GPIO_CLOCK_VAL_IN) != 0;
97 }
98 
get_data(void * data)99 static int get_data(void *data)
100 {
101 	struct intel_gmbus *bus = data;
102 	struct drm_i915_private *dev_priv = bus->dev_priv;
103 	u32 reserved = get_reserved(bus);
104 	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | GPIO_DATA_DIR_MASK);
105 	I915_WRITE_NOTRACE(bus->gpio_reg, reserved);
106 	return (I915_READ_NOTRACE(bus->gpio_reg) & GPIO_DATA_VAL_IN) != 0;
107 }
108 
set_clock(void * data,int state_high)109 static void set_clock(void *data, int state_high)
110 {
111 	struct intel_gmbus *bus = data;
112 	struct drm_i915_private *dev_priv = bus->dev_priv;
113 	u32 reserved = get_reserved(bus);
114 	u32 clock_bits;
115 
116 	if (state_high)
117 		clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
118 	else
119 		clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
120 			GPIO_CLOCK_VAL_MASK;
121 
122 	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | clock_bits);
123 	POSTING_READ(bus->gpio_reg);
124 }
125 
set_data(void * data,int state_high)126 static void set_data(void *data, int state_high)
127 {
128 	struct intel_gmbus *bus = data;
129 	struct drm_i915_private *dev_priv = bus->dev_priv;
130 	u32 reserved = get_reserved(bus);
131 	u32 data_bits;
132 
133 	if (state_high)
134 		data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
135 	else
136 		data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
137 			GPIO_DATA_VAL_MASK;
138 
139 	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | data_bits);
140 	POSTING_READ(bus->gpio_reg);
141 }
142 
143 static bool
intel_gpio_setup(struct intel_gmbus * bus,u32 pin)144 intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
145 {
146 	struct drm_i915_private *dev_priv = bus->dev_priv;
147 	static const int map_pin_to_reg[] = {
148 		0,
149 		GPIOB,
150 		GPIOA,
151 		GPIOC,
152 		GPIOD,
153 		GPIOE,
154 		0,
155 		GPIOF,
156 	};
157 	struct i2c_algo_bit_data *algo;
158 
159 	if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin])
160 		return false;
161 
162 	algo = &bus->bit_algo;
163 
164 	bus->gpio_reg = map_pin_to_reg[pin];
165 	if (HAS_PCH_SPLIT(dev_priv->dev))
166 		bus->gpio_reg += PCH_GPIOA - GPIOA;
167 
168 	bus->adapter.algo_data = algo;
169 	algo->setsda = set_data;
170 	algo->setscl = set_clock;
171 	algo->getsda = get_data;
172 	algo->getscl = get_clock;
173 	algo->udelay = I2C_RISEFALL_TIME;
174 	algo->timeout = usecs_to_jiffies(2200);
175 	algo->data = bus;
176 
177 	return true;
178 }
179 
180 static int
intel_i2c_quirk_xfer(struct intel_gmbus * bus,struct i2c_msg * msgs,int num)181 intel_i2c_quirk_xfer(struct intel_gmbus *bus,
182 		     struct i2c_msg *msgs,
183 		     int num)
184 {
185 	struct drm_i915_private *dev_priv = bus->dev_priv;
186 	int ret;
187 
188 	intel_i2c_reset(dev_priv->dev);
189 
190 	intel_i2c_quirk_set(dev_priv, true);
191 	set_data(bus, 1);
192 	set_clock(bus, 1);
193 	udelay(I2C_RISEFALL_TIME);
194 
195 	ret = i2c_bit_algo.master_xfer(&bus->adapter, msgs, num);
196 
197 	set_data(bus, 1);
198 	set_clock(bus, 1);
199 	intel_i2c_quirk_set(dev_priv, false);
200 
201 	return ret;
202 }
203 
204 static int
gmbus_xfer(struct i2c_adapter * adapter,struct i2c_msg * msgs,int num)205 gmbus_xfer(struct i2c_adapter *adapter,
206 	   struct i2c_msg *msgs,
207 	   int num)
208 {
209 	struct intel_gmbus *bus = container_of(adapter,
210 					       struct intel_gmbus,
211 					       adapter);
212 	struct drm_i915_private *dev_priv = bus->dev_priv;
213 	int i, reg_offset, ret;
214 
215 	mutex_lock(&dev_priv->gmbus_mutex);
216 
217 	if (bus->force_bit) {
218 		ret = intel_i2c_quirk_xfer(bus, msgs, num);
219 		goto out;
220 	}
221 
222 	reg_offset = HAS_PCH_SPLIT(dev_priv->dev) ? PCH_GMBUS0 - GMBUS0 : 0;
223 
224 	I915_WRITE(GMBUS0 + reg_offset, bus->reg0);
225 
226 	for (i = 0; i < num; i++) {
227 		u16 len = msgs[i].len;
228 		u8 *buf = msgs[i].buf;
229 
230 		if (msgs[i].flags & I2C_M_RD) {
231 			I915_WRITE(GMBUS1 + reg_offset,
232 				   GMBUS_CYCLE_WAIT |
233 				   (i + 1 == num ? GMBUS_CYCLE_STOP : 0) |
234 				   (len << GMBUS_BYTE_COUNT_SHIFT) |
235 				   (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
236 				   GMBUS_SLAVE_READ | GMBUS_SW_RDY);
237 			POSTING_READ(GMBUS2+reg_offset);
238 			do {
239 				u32 val, loop = 0;
240 
241 				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
242 					goto timeout;
243 				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
244 					goto clear_err;
245 
246 				val = I915_READ(GMBUS3 + reg_offset);
247 				do {
248 					*buf++ = val & 0xff;
249 					val >>= 8;
250 				} while (--len && ++loop < 4);
251 			} while (len);
252 		} else {
253 			u32 val, loop;
254 
255 			val = loop = 0;
256 			do {
257 				val |= *buf++ << (8 * loop);
258 			} while (--len && ++loop < 4);
259 
260 			I915_WRITE(GMBUS3 + reg_offset, val);
261 			I915_WRITE(GMBUS1 + reg_offset,
262 				   GMBUS_CYCLE_WAIT |
263 				   (i + 1 == num ? GMBUS_CYCLE_STOP : 0) |
264 				   (msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) |
265 				   (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
266 				   GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
267 			POSTING_READ(GMBUS2+reg_offset);
268 
269 			while (len) {
270 				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
271 					goto timeout;
272 				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
273 					goto clear_err;
274 
275 				val = loop = 0;
276 				do {
277 					val |= *buf++ << (8 * loop);
278 				} while (--len && ++loop < 4);
279 
280 				I915_WRITE(GMBUS3 + reg_offset, val);
281 				POSTING_READ(GMBUS2+reg_offset);
282 			}
283 		}
284 
285 		if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
286 			goto timeout;
287 		if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
288 			goto clear_err;
289 	}
290 
291 	goto done;
292 
293 clear_err:
294 	/* Toggle the Software Clear Interrupt bit. This has the effect
295 	 * of resetting the GMBUS controller and so clearing the
296 	 * BUS_ERROR raised by the slave's NAK.
297 	 */
298 	I915_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT);
299 	I915_WRITE(GMBUS1 + reg_offset, 0);
300 
301 done:
302 	/* Mark the GMBUS interface as disabled after waiting for idle.
303 	 * We will re-enable it at the start of the next xfer,
304 	 * till then let it sleep.
305 	 */
306 	if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0, 10))
307 		DRM_INFO("GMBUS timed out waiting for idle\n");
308 	I915_WRITE(GMBUS0 + reg_offset, 0);
309 	ret = i;
310 	goto out;
311 
312 timeout:
313 	DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",
314 		 bus->reg0 & 0xff, bus->adapter.name);
315 	I915_WRITE(GMBUS0 + reg_offset, 0);
316 
317 	/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
318 	if (!bus->has_gpio) {
319 		ret = -EIO;
320 	} else {
321 		bus->force_bit = true;
322 		ret = intel_i2c_quirk_xfer(bus, msgs, num);
323 	}
324 out:
325 	mutex_unlock(&dev_priv->gmbus_mutex);
326 	return ret;
327 }
328 
gmbus_func(struct i2c_adapter * adapter)329 static u32 gmbus_func(struct i2c_adapter *adapter)
330 {
331 	return i2c_bit_algo.functionality(adapter) &
332 		(I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
333 		/* I2C_FUNC_10BIT_ADDR | */
334 		I2C_FUNC_SMBUS_READ_BLOCK_DATA |
335 		I2C_FUNC_SMBUS_BLOCK_PROC_CALL);
336 }
337 
338 static const struct i2c_algorithm gmbus_algorithm = {
339 	.master_xfer	= gmbus_xfer,
340 	.functionality	= gmbus_func
341 };
342 
343 /**
344  * intel_gmbus_setup - instantiate all Intel i2c GMBuses
345  * @dev: DRM device
346  */
intel_setup_gmbus(struct drm_device * dev)347 int intel_setup_gmbus(struct drm_device *dev)
348 {
349 	static const char *names[GMBUS_NUM_PORTS] = {
350 		"disabled",
351 		"ssc",
352 		"vga",
353 		"panel",
354 		"dpc",
355 		"dpb",
356 		"reserved",
357 		"dpd",
358 	};
359 	struct drm_i915_private *dev_priv = dev->dev_private;
360 	int ret, i;
361 
362 	dev_priv->gmbus = kcalloc(GMBUS_NUM_PORTS, sizeof(struct intel_gmbus),
363 				  GFP_KERNEL);
364 	if (dev_priv->gmbus == NULL)
365 		return -ENOMEM;
366 
367 	mutex_init(&dev_priv->gmbus_mutex);
368 
369 	for (i = 0; i < GMBUS_NUM_PORTS; i++) {
370 		struct intel_gmbus *bus = &dev_priv->gmbus[i];
371 
372 		bus->adapter.owner = THIS_MODULE;
373 		bus->adapter.class = I2C_CLASS_DDC;
374 		snprintf(bus->adapter.name,
375 			 sizeof(bus->adapter.name),
376 			 "i915 gmbus %s",
377 			 names[i]);
378 
379 		bus->adapter.dev.parent = &dev->pdev->dev;
380 		bus->dev_priv = dev_priv;
381 
382 		bus->adapter.algo = &gmbus_algorithm;
383 		ret = i2c_add_adapter(&bus->adapter);
384 		if (ret)
385 			goto err;
386 
387 		/* By default use a conservative clock rate */
388 		bus->reg0 = i | GMBUS_RATE_100KHZ;
389 
390 		bus->has_gpio = intel_gpio_setup(bus, i);
391 
392 		/* XXX force bit banging until GMBUS is fully debugged */
393 		if (bus->has_gpio)
394 			bus->force_bit = true;
395 	}
396 
397 	intel_i2c_reset(dev_priv->dev);
398 
399 	return 0;
400 
401 err:
402 	while (--i) {
403 		struct intel_gmbus *bus = &dev_priv->gmbus[i];
404 		i2c_del_adapter(&bus->adapter);
405 	}
406 	kfree(dev_priv->gmbus);
407 	dev_priv->gmbus = NULL;
408 	return ret;
409 }
410 
intel_gmbus_set_speed(struct i2c_adapter * adapter,int speed)411 void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
412 {
413 	struct intel_gmbus *bus = to_intel_gmbus(adapter);
414 
415 	bus->reg0 = (bus->reg0 & ~(0x3 << 8)) | speed;
416 }
417 
intel_gmbus_force_bit(struct i2c_adapter * adapter,bool force_bit)418 void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit)
419 {
420 	struct intel_gmbus *bus = to_intel_gmbus(adapter);
421 
422 	if (bus->has_gpio)
423 		bus->force_bit = force_bit;
424 }
425 
intel_teardown_gmbus(struct drm_device * dev)426 void intel_teardown_gmbus(struct drm_device *dev)
427 {
428 	struct drm_i915_private *dev_priv = dev->dev_private;
429 	int i;
430 
431 	if (dev_priv->gmbus == NULL)
432 		return;
433 
434 	for (i = 0; i < GMBUS_NUM_PORTS; i++) {
435 		struct intel_gmbus *bus = &dev_priv->gmbus[i];
436 		i2c_del_adapter(&bus->adapter);
437 	}
438 
439 	kfree(dev_priv->gmbus);
440 	dev_priv->gmbus = NULL;
441 }
442