1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _LINUX_IVERSION_H
3 #define _LINUX_IVERSION_H
4 
5 #include <linux/fs.h>
6 
7 /*
8  * The inode->i_version field:
9  * ---------------------------
10  * The change attribute (i_version) is mandated by NFSv4 and is mostly for
11  * knfsd, but is also used for other purposes (e.g. IMA). The i_version must
12  * appear different to observers if there was a change to the inode's data or
13  * metadata since it was last queried.
14  *
15  * Observers see the i_version as a 64-bit number that never decreases. If it
16  * remains the same since it was last checked, then nothing has changed in the
17  * inode. If it's different then something has changed. Observers cannot infer
18  * anything about the nature or magnitude of the changes from the value, only
19  * that the inode has changed in some fashion.
20  *
21  * Not all filesystems properly implement the i_version counter. Subsystems that
22  * want to use i_version field on an inode should first check whether the
23  * filesystem sets the SB_I_VERSION flag (usually via the IS_I_VERSION macro).
24  *
25  * Those that set SB_I_VERSION will automatically have their i_version counter
26  * incremented on writes to normal files. If the SB_I_VERSION is not set, then
27  * the VFS will not touch it on writes, and the filesystem can use it how it
28  * wishes. Note that the filesystem is always responsible for updating the
29  * i_version on namespace changes in directories (mkdir, rmdir, unlink, etc.).
30  * We consider these sorts of filesystems to have a kernel-managed i_version.
31  *
32  * It may be impractical for filesystems to keep i_version updates atomic with
33  * respect to the changes that cause them.  They should, however, guarantee
34  * that i_version updates are never visible before the changes that caused
35  * them.  Also, i_version updates should never be delayed longer than it takes
36  * the original change to reach disk.
37  *
38  * This implementation uses the low bit in the i_version field as a flag to
39  * track when the value has been queried. If it has not been queried since it
40  * was last incremented, we can skip the increment in most cases.
41  *
42  * In the event that we're updating the ctime, we will usually go ahead and
43  * bump the i_version anyway. Since that has to go to stable storage in some
44  * fashion, we might as well increment it as well.
45  *
46  * With this implementation, the value should always appear to observers to
47  * increase over time if the file has changed. It's recommended to use
48  * inode_eq_iversion() helper to compare values.
49  *
50  * Note that some filesystems (e.g. NFS and AFS) just use the field to store
51  * a server-provided value (for the most part). For that reason, those
52  * filesystems do not set SB_I_VERSION. These filesystems are considered to
53  * have a self-managed i_version.
54  *
55  * Persistently storing the i_version
56  * ----------------------------------
57  * Queries of the i_version field are not gated on them hitting the backing
58  * store. It's always possible that the host could crash after allowing
59  * a query of the value but before it has made it to disk.
60  *
61  * To mitigate this problem, filesystems should always use
62  * inode_set_iversion_queried when loading an existing inode from disk. This
63  * ensures that the next attempted inode increment will result in the value
64  * changing.
65  *
66  * Storing the value to disk therefore does not count as a query, so those
67  * filesystems should use inode_peek_iversion to grab the value to be stored.
68  * There is no need to flag the value as having been queried in that case.
69  */
70 
71 /*
72  * We borrow the lowest bit in the i_version to use as a flag to tell whether
73  * it has been queried since we last incremented it. If it has, then we must
74  * increment it on the next change. After that, we can clear the flag and
75  * avoid incrementing it again until it has again been queried.
76  */
77 #define I_VERSION_QUERIED_SHIFT	(1)
78 #define I_VERSION_QUERIED	(1ULL << (I_VERSION_QUERIED_SHIFT - 1))
79 #define I_VERSION_INCREMENT	(1ULL << I_VERSION_QUERIED_SHIFT)
80 
81 /**
82  * inode_set_iversion_raw - set i_version to the specified raw value
83  * @inode: inode to set
84  * @val: new i_version value to set
85  *
86  * Set @inode's i_version field to @val. This function is for use by
87  * filesystems that self-manage the i_version.
88  *
89  * For example, the NFS client stores its NFSv4 change attribute in this way,
90  * and the AFS client stores the data_version from the server here.
91  */
92 static inline void
inode_set_iversion_raw(struct inode * inode,u64 val)93 inode_set_iversion_raw(struct inode *inode, u64 val)
94 {
95 	atomic64_set(&inode->i_version, val);
96 }
97 
98 /**
99  * inode_peek_iversion_raw - grab a "raw" iversion value
100  * @inode: inode from which i_version should be read
101  *
102  * Grab a "raw" inode->i_version value and return it. The i_version is not
103  * flagged or converted in any way. This is mostly used to access a self-managed
104  * i_version.
105  *
106  * With those filesystems, we want to treat the i_version as an entirely
107  * opaque value.
108  */
109 static inline u64
inode_peek_iversion_raw(const struct inode * inode)110 inode_peek_iversion_raw(const struct inode *inode)
111 {
112 	return atomic64_read(&inode->i_version);
113 }
114 
115 /**
116  * inode_set_max_iversion_raw - update i_version new value is larger
117  * @inode: inode to set
118  * @val: new i_version to set
119  *
120  * Some self-managed filesystems (e.g Ceph) will only update the i_version
121  * value if the new value is larger than the one we already have.
122  */
123 static inline void
inode_set_max_iversion_raw(struct inode * inode,u64 val)124 inode_set_max_iversion_raw(struct inode *inode, u64 val)
125 {
126 	u64 cur, old;
127 
128 	cur = inode_peek_iversion_raw(inode);
129 	for (;;) {
130 		if (cur > val)
131 			break;
132 		old = atomic64_cmpxchg(&inode->i_version, cur, val);
133 		if (likely(old == cur))
134 			break;
135 		cur = old;
136 	}
137 }
138 
139 /**
140  * inode_set_iversion - set i_version to a particular value
141  * @inode: inode to set
142  * @val: new i_version value to set
143  *
144  * Set @inode's i_version field to @val. This function is for filesystems with
145  * a kernel-managed i_version, for initializing a newly-created inode from
146  * scratch.
147  *
148  * In this case, we do not set the QUERIED flag since we know that this value
149  * has never been queried.
150  */
151 static inline void
inode_set_iversion(struct inode * inode,u64 val)152 inode_set_iversion(struct inode *inode, u64 val)
153 {
154 	inode_set_iversion_raw(inode, val << I_VERSION_QUERIED_SHIFT);
155 }
156 
157 /**
158  * inode_set_iversion_queried - set i_version to a particular value as quereied
159  * @inode: inode to set
160  * @val: new i_version value to set
161  *
162  * Set @inode's i_version field to @val, and flag it for increment on the next
163  * change.
164  *
165  * Filesystems that persistently store the i_version on disk should use this
166  * when loading an existing inode from disk.
167  *
168  * When loading in an i_version value from a backing store, we can't be certain
169  * that it wasn't previously viewed before being stored. Thus, we must assume
170  * that it was, to ensure that we don't end up handing out the same value for
171  * different versions of the same inode.
172  */
173 static inline void
inode_set_iversion_queried(struct inode * inode,u64 val)174 inode_set_iversion_queried(struct inode *inode, u64 val)
175 {
176 	inode_set_iversion_raw(inode, (val << I_VERSION_QUERIED_SHIFT) |
177 				I_VERSION_QUERIED);
178 }
179 
180 /**
181  * inode_maybe_inc_iversion - increments i_version
182  * @inode: inode with the i_version that should be updated
183  * @force: increment the counter even if it's not necessary?
184  *
185  * Every time the inode is modified, the i_version field must be seen to have
186  * changed by any observer.
187  *
188  * If "force" is set or the QUERIED flag is set, then ensure that we increment
189  * the value, and clear the queried flag.
190  *
191  * In the common case where neither is set, then we can return "false" without
192  * updating i_version.
193  *
194  * If this function returns false, and no other metadata has changed, then we
195  * can avoid logging the metadata.
196  */
197 static inline bool
inode_maybe_inc_iversion(struct inode * inode,bool force)198 inode_maybe_inc_iversion(struct inode *inode, bool force)
199 {
200 	u64 cur, old, new;
201 
202 	/*
203 	 * The i_version field is not strictly ordered with any other inode
204 	 * information, but the legacy inode_inc_iversion code used a spinlock
205 	 * to serialize increments.
206 	 *
207 	 * Here, we add full memory barriers to ensure that any de-facto
208 	 * ordering with other info is preserved.
209 	 *
210 	 * This barrier pairs with the barrier in inode_query_iversion()
211 	 */
212 	smp_mb();
213 	cur = inode_peek_iversion_raw(inode);
214 	for (;;) {
215 		/* If flag is clear then we needn't do anything */
216 		if (!force && !(cur & I_VERSION_QUERIED))
217 			return false;
218 
219 		/* Since lowest bit is flag, add 2 to avoid it */
220 		new = (cur & ~I_VERSION_QUERIED) + I_VERSION_INCREMENT;
221 
222 		old = atomic64_cmpxchg(&inode->i_version, cur, new);
223 		if (likely(old == cur))
224 			break;
225 		cur = old;
226 	}
227 	return true;
228 }
229 
230 
231 /**
232  * inode_inc_iversion - forcibly increment i_version
233  * @inode: inode that needs to be updated
234  *
235  * Forcbily increment the i_version field. This always results in a change to
236  * the observable value.
237  */
238 static inline void
inode_inc_iversion(struct inode * inode)239 inode_inc_iversion(struct inode *inode)
240 {
241 	inode_maybe_inc_iversion(inode, true);
242 }
243 
244 /**
245  * inode_iversion_need_inc - is the i_version in need of being incremented?
246  * @inode: inode to check
247  *
248  * Returns whether the inode->i_version counter needs incrementing on the next
249  * change. Just fetch the value and check the QUERIED flag.
250  */
251 static inline bool
inode_iversion_need_inc(struct inode * inode)252 inode_iversion_need_inc(struct inode *inode)
253 {
254 	return inode_peek_iversion_raw(inode) & I_VERSION_QUERIED;
255 }
256 
257 /**
258  * inode_inc_iversion_raw - forcibly increment raw i_version
259  * @inode: inode that needs to be updated
260  *
261  * Forcbily increment the raw i_version field. This always results in a change
262  * to the raw value.
263  *
264  * NFS will use the i_version field to store the value from the server. It
265  * mostly treats it as opaque, but in the case where it holds a write
266  * delegation, it must increment the value itself. This function does that.
267  */
268 static inline void
inode_inc_iversion_raw(struct inode * inode)269 inode_inc_iversion_raw(struct inode *inode)
270 {
271 	atomic64_inc(&inode->i_version);
272 }
273 
274 /**
275  * inode_peek_iversion - read i_version without flagging it to be incremented
276  * @inode: inode from which i_version should be read
277  *
278  * Read the inode i_version counter for an inode without registering it as a
279  * query.
280  *
281  * This is typically used by local filesystems that need to store an i_version
282  * on disk. In that situation, it's not necessary to flag it as having been
283  * viewed, as the result won't be used to gauge changes from that point.
284  */
285 static inline u64
inode_peek_iversion(const struct inode * inode)286 inode_peek_iversion(const struct inode *inode)
287 {
288 	return inode_peek_iversion_raw(inode) >> I_VERSION_QUERIED_SHIFT;
289 }
290 
291 /**
292  * inode_query_iversion - read i_version for later use
293  * @inode: inode from which i_version should be read
294  *
295  * Read the inode i_version counter. This should be used by callers that wish
296  * to store the returned i_version for later comparison. This will guarantee
297  * that a later query of the i_version will result in a different value if
298  * anything has changed.
299  *
300  * In this implementation, we fetch the current value, set the QUERIED flag and
301  * then try to swap it into place with a cmpxchg, if it wasn't already set. If
302  * that fails, we try again with the newly fetched value from the cmpxchg.
303  */
304 static inline u64
inode_query_iversion(struct inode * inode)305 inode_query_iversion(struct inode *inode)
306 {
307 	u64 cur, old, new;
308 
309 	cur = inode_peek_iversion_raw(inode);
310 	for (;;) {
311 		/* If flag is already set, then no need to swap */
312 		if (cur & I_VERSION_QUERIED) {
313 			/*
314 			 * This barrier (and the implicit barrier in the
315 			 * cmpxchg below) pairs with the barrier in
316 			 * inode_maybe_inc_iversion().
317 			 */
318 			smp_mb();
319 			break;
320 		}
321 
322 		new = cur | I_VERSION_QUERIED;
323 		old = atomic64_cmpxchg(&inode->i_version, cur, new);
324 		if (likely(old == cur))
325 			break;
326 		cur = old;
327 	}
328 	return cur >> I_VERSION_QUERIED_SHIFT;
329 }
330 
331 /*
332  * For filesystems without any sort of change attribute, the best we can
333  * do is fake one up from the ctime:
334  */
time_to_chattr(struct timespec64 * t)335 static inline u64 time_to_chattr(struct timespec64 *t)
336 {
337 	u64 chattr = t->tv_sec;
338 
339 	chattr <<= 32;
340 	chattr += t->tv_nsec;
341 	return chattr;
342 }
343 
344 /**
345  * inode_eq_iversion_raw - check whether the raw i_version counter has changed
346  * @inode: inode to check
347  * @old: old value to check against its i_version
348  *
349  * Compare the current raw i_version counter with a previous one. Returns true
350  * if they are the same or false if they are different.
351  */
352 static inline bool
inode_eq_iversion_raw(const struct inode * inode,u64 old)353 inode_eq_iversion_raw(const struct inode *inode, u64 old)
354 {
355 	return inode_peek_iversion_raw(inode) == old;
356 }
357 
358 /**
359  * inode_eq_iversion - check whether the i_version counter has changed
360  * @inode: inode to check
361  * @old: old value to check against its i_version
362  *
363  * Compare an i_version counter with a previous one. Returns true if they are
364  * the same, and false if they are different.
365  *
366  * Note that we don't need to set the QUERIED flag in this case, as the value
367  * in the inode is not being recorded for later use.
368  */
369 static inline bool
inode_eq_iversion(const struct inode * inode,u64 old)370 inode_eq_iversion(const struct inode *inode, u64 old)
371 {
372 	return inode_peek_iversion(inode) == old;
373 }
374 #endif
375